freebsd-skq/sys/pci/pci_compat.c
Doug Rabson a0ab71761c Add functions for accessing dense and bwx memory for pci devices. These
routines are necessary to allow the use of certain types of hardware on
the alpha, particularly a Myrinet card.

Submitted by: Andrew Gallatin <gallatin@cs.duke.edu>
1998-10-06 14:18:40 +00:00

472 lines
10 KiB
C

/*
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id: pci_compat.c,v 1.11 1998/09/15 08:21:09 gibbs Exp $
*
*/
#include "pci.h"
#if NPCI > 0
/* for compatibility to FreeBSD-2.2 version of PCI code */
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/kernel.h> /* for DATA_SET support */
#include <vm/vm.h>
#include <vm/pmap.h>
#include <sys/interrupt.h>
#include <pci/pcireg.h>
#include <pci/pcivar.h>
#ifdef RESOURCE_CHECK
#include <sys/drvresource.h>
#endif
#ifdef PCI_COMPAT
/* ------------------------------------------------------------------------- */
static int
pci_mapno(pcicfgregs *cfg, int reg)
{
int map = -1;
if ((reg & 0x03) == 0) {
map = (reg -0x10) / 4;
if (map < 0 || map >= cfg->nummaps)
map = -1;
}
return (map);
}
static int
pci_porten(pcicfgregs *cfg)
{
return ((cfg->cmdreg & PCIM_CMD_PORTEN) != 0);
}
static int
pci_isportmap(pcicfgregs *cfg, int map)
{
return ((unsigned)map < cfg->nummaps
&& (cfg->map[map].type & PCI_MAPPORT) != 0);
}
static int
pci_memen(pcicfgregs *cfg)
{
return ((cfg->cmdreg & PCIM_CMD_MEMEN) != 0);
}
static int
pci_ismemmap(pcicfgregs *cfg, int map)
{
return ((unsigned)map < cfg->nummaps
&& (cfg->map[map].type & PCI_MAPMEM) != 0);
}
/* ------------------------------------------------------------------------- */
u_long
pci_conf_read(pcici_t tag, u_long reg)
{
return (pci_cfgread(tag, reg, 4));
}
void
pci_conf_write(pcici_t tag, u_long reg, u_long data)
{
pci_cfgwrite(tag, reg, data, 4);
}
int pci_map_port(pcici_t cfg, u_long reg, pci_port_t* pa)
{
int map;
map = pci_mapno(cfg, reg);
if (pci_porten(cfg) && pci_isportmap(cfg, map)) {
u_int32_t iobase;
u_int32_t iosize;
iobase = cfg->map[map].base;
iosize = 1 << cfg->map[map].ln2size;
#ifdef RESOURCE_CHECK
if (resource_claim(cfg, REST_PORT, RESF_NONE,
iobase, iobase + iosize -1) == 0)
#endif /* RESOURCE_CHECK */
{
*pa = iobase;
return (1);
}
}
return (0);
}
int pci_map_mem(pcici_t cfg, u_long reg, vm_offset_t* va, vm_offset_t* pa)
{
int map;
map = pci_mapno(cfg, reg);
if (pci_memen(cfg) && pci_ismemmap(cfg, map)) {
u_int32_t paddr;
u_int32_t psize;
paddr = cfg->map[map].base;
psize = 1 << cfg->map[map].ln2size;
#ifdef RESOURCE_CHECK
if (resource_claim(cfg, REST_MEM, RESF_NONE,
paddr, paddr + psize -1) == 0)
#endif /* RESOURCE_CHECK */
{
u_int32_t poffs;
vm_offset_t vaddr;
poffs = paddr - trunc_page(paddr);
#ifdef __i386__
vaddr = (vm_offset_t)pmap_mapdev(paddr-poffs, psize+poffs);
#endif
#ifdef __alpha__
vaddr = paddr-poffs;
#endif
if (vaddr != NULL) {
vaddr += poffs;
*va = vaddr;
*pa = paddr;
return (1);
}
}
}
return (0);
}
int
pci_map_dense(pcici_t cfg, u_long reg, vm_offset_t* va, vm_offset_t* pa)
{
vm_offset_t dense;
int retval = 0;
if(pci_map_mem(cfg, reg, va, pa)){
#ifdef __alpha__
if(dense = pci_cvt_to_dense(*pa)){
*pa = dense;
*va = ALPHA_PHYS_TO_K0SEG(*pa);
return (1);
}
#endif
#ifdef __i386__
return(1);
#endif
}
return (0);
}
int
pci_map_bwx(pcici_t cfg, u_long reg, vm_offset_t* va, vm_offset_t* pa)
{
vm_offset_t bwx;
int retval = 0;
if(pci_map_mem(cfg, reg, va, pa)){
#ifdef __alpha__
if(bwx = pci_cvt_to_bwx(*pa)){
*pa = bwx;
*va = ALPHA_PHYS_TO_K0SEG(*pa);
return (1);
}
#endif
#ifdef __i386__
return(1);
#endif
}
return (0);
}
int
pci_map_int(pcici_t cfg, pci_inthand_t *func, void *arg, unsigned *maskptr)
{
int error;
#ifdef APIC_IO
int nextpin, muxcnt;
#endif
if (cfg->intpin != 0) {
int irq = cfg->intline;
void *dev_instance = (void *)-1; /* XXX use cfg->devdata */
void *idesc;
idesc = intr_create(dev_instance, irq, func, arg, maskptr, 0);
error = intr_connect(idesc);
if (error != 0)
return 0;
#ifdef APIC_IO
nextpin = next_apic_irq(irq);
if (nextpin < 0)
return 1;
/*
* Attempt handling of some broken mp tables.
*
* It's OK to yell (since the mp tables are broken).
*
* Hanging in the boot is not OK
*/
muxcnt = 2;
nextpin = next_apic_irq(nextpin);
while (muxcnt < 5 && nextpin >= 0) {
muxcnt++;
nextpin = next_apic_irq(nextpin);
}
if (muxcnt >= 5) {
printf("bogus MP table, more than 4 IO APIC pins connected to the same PCI device or ISA/EISA interrupt\n");
return 0;
}
printf("bogus MP table, %d IO APIC pins connected to the same PCI device or ISA/EISA interrupt\n", muxcnt);
nextpin = next_apic_irq(irq);
while (nextpin >= 0) {
idesc = intr_create(dev_instance, nextpin, func, arg,
maskptr, 0);
error = intr_connect(idesc);
if (error != 0)
return 0;
printf("Registered extra interrupt handler for int %d (in addition to int %d)\n", nextpin, irq);
nextpin = next_apic_irq(nextpin);
}
#endif
}
return (1);
}
int
pci_unmap_int(pcici_t cfg)
{
return (0); /* not supported, yet, since cfg doesn't know about idesc */
}
/* ------------------------------------------------------------------------- */
/*
* Preliminary support for "wired" PCI devices.
* This code supports currently only devices on PCI bus 0, since the
* mapping from PCI BIOS bus numbers to configuration file bus numbers
* is not yet maintained, whenever a PCI to PCI bridge is found.
* The "bus" field of "pciwirecfg" correlates an PCI bus with the bridge
* it is attached to. The "biosbus" field is to be updated for each bus,
* whose bridge is probed. An entry with bus != 0 and biosbus == 0 is
* invalid and will be skipped in the search for a wired unit, but not
* in the test for a free unit number.
*/
typedef struct {
char *name;
int unit;
u_int8_t bus;
u_int8_t slot;
u_int8_t func;
u_int8_t biosbus;
} pciwirecfg;
static pciwirecfg pci_wireddevs[] = {
/* driver, unit, bus, slot, func, BIOS bus */
#ifdef PCI_DEBUG
{ "ncr", 2, 1, 4, 0, 0 },
{ "ed", 2, 1, 5, 0, 0 },
#endif /* PCI_DEBUG */
/* do not delete the end marker that follows this comment !!! */
{ NULL }
};
/* return unit number of wired device, or -1 if no match */
static int
pci_wiredunit(pcicfgregs *cfg, char *name)
{
pciwirecfg *p;
p = pci_wireddevs;
while (p->name != NULL) {
if (p->bus == cfg->bus
&& p->slot == cfg->slot
&& p->func == cfg->func
&& strcmp(p->name, name) == 0)
return (p->unit);
p++;
}
return (-1);
}
/* return free unit number equal or greater to the one supplied as parameter */
static int
pci_freeunit(pcicfgregs *cfg, char *name, int unit)
{
pciwirecfg *p;
p = pci_wireddevs;
while (p->name != NULL) {
if (p->unit == unit && strcmp(p->name, name) == 0) {
p = pci_wireddevs;
unit++;
} else {
p++;
}
}
return (unit);
}
static char *drvname;
static char*
pci_probedrv(pcicfgregs *cfg, struct pci_device *dvp)
{
if (dvp && dvp->pd_probe) {
pcidi_t type = (cfg->device << 16) + cfg->vendor;
return (dvp->pd_probe(cfg, type));
}
return (NULL);
}
static struct pci_lkm *pci_lkm_head;
static struct pci_device*
pci_finddrv(pcicfgregs *cfg)
{
struct pci_device **dvpp;
struct pci_device *dvp = NULL;
struct pci_lkm *lkm;
drvname = NULL;
lkm = pci_lkm_head;
while (drvname == NULL && lkm != NULL) {
dvp = lkm->dvp;
drvname = pci_probedrv(cfg, dvp);
lkm = lkm->next;
}
dvpp = (struct pci_device **)pcidevice_set.ls_items;
while (drvname == NULL && (dvp = *dvpp++) != NULL)
drvname = pci_probedrv(cfg, dvp);
return (dvp);
}
static void
pci_drvmessage(pcicfgregs *cfg, char *name, int unit)
{
if (drvname == NULL || *drvname == '\0')
return;
printf("%s%d: <%s> rev 0x%02x", name, unit, drvname, cfg->revid);
if (cfg->intpin != 0)
printf(" int %c irq %d", cfg->intpin + 'a' -1, cfg->intline);
printf(" on pci%d.%d.%d\n", cfg->bus, cfg->slot, cfg->func);
}
void
pci_drvattach(struct pci_devinfo *dinfo)
{
struct pci_device *dvp;
pcicfgregs *cfg;
cfg = &dinfo->cfg;
dvp = pci_finddrv(cfg);
if (dvp != NULL) {
int unit;
unit = pci_wiredunit(cfg, dvp->pd_name);
if (unit < 0) {
unit = pci_freeunit(cfg, dvp->pd_name, *dvp->pd_count);
*dvp->pd_count = unit +1;
}
pci_drvmessage(cfg, dvp->pd_name, unit);
if (dvp->pd_attach)
dvp->pd_attach(cfg, unit);
dinfo->device = dvp;
/*
* XXX KDM for some devices, dvp->pd_name winds up NULL.
* I haven't investigated enough to figure out why this
* would happen.
*/
if (dvp->pd_name != NULL)
strncpy(dinfo->conf.pd_name, dvp->pd_name,
sizeof(dinfo->conf.pd_name));
else
strncpy(dinfo->conf.pd_name, "????",
sizeof(dinfo->conf.pd_name));
dinfo->conf.pd_unit = unit;
}
}
/* ------------------------------------------------------------------------- */
static void
pci_rescan(void)
{
/* XXX do nothing, currently, soon to come ... */
}
int pci_register_lkm (struct pci_device *dvp, int if_revision)
{
struct pci_lkm *lkm;
if (if_revision != 0) {
return (-1);
}
if (dvp == NULL || dvp->pd_probe == NULL || dvp->pd_attach == NULL) {
return (-1);
}
lkm = malloc (sizeof (*lkm), M_DEVBUF, M_WAITOK);
if (lkm != NULL) {
return (-1);
}
lkm->dvp = dvp;
lkm->next = pci_lkm_head;
pci_lkm_head = lkm;
pci_rescan();
return (0);
}
void
pci_configure(void)
{
pci_probe(NULL);
}
/* ------------------------------------------------------------------------- */
#endif /* PCI_COMPAT */
#endif /* NPCI > 0 */