freebsd-skq/sys/arm/amlogic/aml8726/aml8726_sdxc-m8.h
Ganbold Tsagaankhuu 562246dff8 Add necessary changes to support various Amlogic SoC devices
specially aml8726-m6 and aml8726-m8b SoC based devices.
aml8726-m6 SoC exist in devices such as Visson ATV-102.
Hardkernel ODROID-C1 board has aml8726-m8b SoC.

The following support is included:
  Basic machdep code
  SMP
  Interrupt controller
  Clock control driver (aka gate)
  Pinctrl
  Timer
  Real time clock
  UART
  GPIO
  I2C
  SD controller
  SDXC controller
  USB
  Watchdog
  Random number generator
  PLL / Clock frequency measurement
  Frame buffer

Submitted by:   John Wehle
Approved by:    stas (mentor)
2015-03-31 11:50:46 +00:00

224 lines
8.7 KiB
C

/*-
* Copyright 2015 John Wehle <john@feith.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _ARM_AMLOGIC_AML8726_SDXC_M8_H
#define _ARM_AMLOGIC_AML8726_SDXC_M8_H
#define AML_SDXC_ALIGN_DMA 4
#define AML_SDXC_MAX_DMA 4096
/*
* Timeouts are in milliseconds
*
* Read and write are per section 4.6.2 of the:
*
* SD Specifications Part 1
* Physicaly Layer Simplified Specification
* Version 4.10
*/
#define AML_SDXC_CMD_TIMEOUT 50
#define AML_SDXC_READ_TIMEOUT 100
#define AML_SDXC_WRITE_TIMEOUT 500
#define AML_SDXC_MAX_TIMEOUT 5000
#define AML_SDXC_BUSY_POLL_INTVL 1
#define AML_SDXC_BUSY_TIMEOUT 1000
/*
* There's some disagreements between the S805 documentation
* and the Amlogic Linux platform code regarding the exact
* layout of various registers ... when in doubt we follow
* the platform code.
*/
#define AML_SDXC_CMD_ARGUMENT_REG 0
#define AML_SDXC_SEND_REG 4
#define AML_SDXC_SEND_REP_PKG_CNT_MASK (0xffffU << 16)
#define AML_SDXC_SEND_REP_PKG_CNT_SHIFT 16
#define AML_SDXC_SEND_DATA_STOP (1 << 11)
#define AML_SDXC_SEND_DATA_WRITE (1 << 10)
#define AML_SDXC_SEND_RESP_NO_CRC7_CHECK (1 << 9)
#define AML_SDXC_SEND_RESP_136 (1 << 8)
#define AML_SDXC_SEND_CMD_HAS_DATA (1 << 7)
#define AML_SDXC_SEND_CMD_HAS_RESP (1 << 6)
#define AML_SDXC_SEND_INDEX_MASK 0x3f
#define AML_SDXC_SEND_INDEX_SHIFT 0
#define AML_SDXC_CNTRL_REG 8
#define AML_SDXC_CNTRL_TX_ENDIAN_MASK (7 << 29)
#define AML_SDXC_CNTRL_TX_ENDIAN_SHIFT 29
#define AML_SDXC_CNTRL_RX_ENDIAN_MASK (7 << 24)
#define AML_SDXC_CNTRL_RX_ENDIAN_SHIFT 24
#define AML_SDXC_CNTRL_RX_PERIOD_SHIFT 20
#define AML_SDXC_CNTRL_RX_TIMEOUT_SHIFT 13
#define AML_SDXC_CNTRL_PKG_LEN_MASK (0x1ff << 4)
#define AML_SDXC_CNTRL_PKG_LEN_SHIFT 4
#define AML_SDXC_CNTRL_BUS_WIDTH_MASK (3 << 0)
#define AML_SDXC_CNTRL_BUS_WIDTH_1 (0 << 0)
#define AML_SDXC_CNTRL_BUS_WIDTH_4 (1 << 0)
#define AML_SDXC_CNTRL_BUS_WIDTH_8 (2 << 0)
#define AML_SDXC_STATUS_REG 12
#define AML_SDXC_STATUS_TX_CNT_MASK (0x7f << 13)
#define AML_SDXC_STATUS_TX_CNT_SHIFT 13
#define AML_SDXC_STATUS_RX_CNT_MASK (0x7f << 6)
#define AML_SDXC_STATUS_RX_CNT_SHIFT 6
#define AML_SDXC_STATUS_CMD (1 << 5)
#define AML_SDXC_STATUS_DAT3 (1 << 4)
#define AML_SDXC_STATUS_DAT2 (1 << 3)
#define AML_SDXC_STATUS_DAT1 (1 << 2)
#define AML_SDXC_STATUS_DAT0 (1 << 1)
#define AML_SDXC_STATUS_BUSY (1 << 0)
#define AML_SDXC_CLK_CNTRL_REG 16
#define AML_SDXC_CLK_CNTRL_MEM_PWR_MASK (3 << 25)
#define AML_SDXC_CLK_CNTRL_MEM_PWR_OFF (3 << 25)
#define AML_SDXC_CLK_CNTRL_MEM_PWR_ON (0 << 25)
#define AML_SDXC_CLK_CNTRL_CLK_SEL_MASK (3 << 16)
#define AML_SDXC_CLK_CNTRL_CLK_SEL_SHIFT 16
#define AML_SDXC_CLK_CNTRL_CLK_MODULE_EN (1 << 15)
#define AML_SDXC_CLK_CNTRL_SD_CLK_EN (1 << 14)
#define AML_SDXC_CLK_CNTRL_RX_CLK_EN (1 << 13)
#define AML_SDXC_CLK_CNTRL_TX_CLK_EN (1 << 12)
#define AML_SDXC_CLK_CNTRL_CLK_DIV_MASK 0x0fff
#define AML_SDXC_CLK_CNTRL_CLK_DIV_SHIFT 0
#define AML_SDXC_DMA_ADDR_REG 20
#define AML_SDXC_PDMA_REG 24
#define AML_SDXC_PDMA_TX_FILL (1U << 31)
#define AML_SDXC_PDMA_RX_FLUSH_NOW (1 << 30)
#define AML_SDXC_PDMA_RX_FLUSH_MODE_SW (1 << 29)
#define AML_SDXC_PDMA_TX_THOLD_MASK (0x3f << 22)
#define AML_SDXC_PDMA_TX_THOLD_SHIFT 22
#define AML_SDXC_PDMA_RX_THOLD_MASK (0x3f << 15)
#define AML_SDXC_PDMA_RX_THOLD_SHIFT 15
#define AML_SDXC_PDMA_RD_BURST_MASK (0x1f << 10)
#define AML_SDXC_PDMA_RD_BURST_SHIFT 10
#define AML_SDXC_PDMA_WR_BURST_MASK (0x1f << 5)
#define AML_SDXC_PDMA_WR_BURST_SHIFT 5
#define AML_SDXC_PDMA_DMA_URGENT (1 << 4)
#define AML_SDXC_PDMA_RESP_INDEX_MASK (7 << 1)
#define AML_SDXC_PDMA_RESP_INDEX_SHIFT 1
#define AML_SDXC_PDMA_DMA_EN (1 << 0)
#define AML_SDXC_MISC_REG 28
#define AML_SDXC_MISC_TXSTART_THOLD_MASK (7U << 29)
#define AML_SDXC_MISC_TXSTART_THOLD_SHIFT 29
#define AML_SDXC_MISC_MANUAL_STOP_MODE (1 << 28)
#define AML_SDXC_MISC_WCRC_OK_PAT_MASK (7 << 7)
#define AML_SDXC_MISC_WCRC_OK_PAT_SHIFT 7
#define AML_SDXC_MISC_WCRC_ERR_PAT_MASK (7 << 4)
#define AML_SDXC_MISC_WCRC_ERR_PAT_SHIFT 4
#define AML_SDXC_DATA_REG 32
#define AML_SDXC_IRQ_ENABLE_REG 36
#define AML_SDXC_IRQ_ENABLE_TX_FIFO_EMPTY (1 << 13)
#define AML_SDXC_IRQ_ENABLE_RX_FIFO_FULL (1 << 12)
#define AML_SDXC_IRQ_ENABLE_DMA_DONE (1 << 11)
#define AML_SDXC_IRQ_ENABLE_TRANSFER_DONE_OK (1 << 7)
#define AML_SDXC_IRQ_ENABLE_A_PKG_CRC_ERR (1 << 6)
#define AML_SDXC_IRQ_ENABLE_A_PKG_TIMEOUT_ERR (1 << 5)
#define AML_SDXC_IRQ_ENABLE_A_PKG_DONE_OK (1 << 4)
#define AML_SDXC_IRQ_ENABLE_RESP_CRC_ERR (1 << 2)
#define AML_SDXC_IRQ_ENABLE_RESP_TIMEOUT_ERR (1 << 1)
#define AML_SDXC_IRQ_ENABLE_RESP_OK (1 << 0)
#define AML_SDXC_IRQ_ENABLE_STANDARD \
(AML_SDXC_IRQ_ENABLE_TX_FIFO_EMPTY | \
AML_SDXC_IRQ_ENABLE_RX_FIFO_FULL | \
AML_SDXC_IRQ_ENABLE_A_PKG_CRC_ERR | \
AML_SDXC_IRQ_ENABLE_A_PKG_TIMEOUT_ERR | \
AML_SDXC_IRQ_ENABLE_RESP_CRC_ERR | \
AML_SDXC_IRQ_ENABLE_RESP_TIMEOUT_ERR | \
AML_SDXC_IRQ_ENABLE_RESP_OK)
#define AML_SDXC_IRQ_STATUS_REG 40
#define AML_SDXC_IRQ_STATUS_TX_FIFO_EMPTY (1 << 13)
#define AML_SDXC_IRQ_STATUS_RX_FIFO_FULL (1 << 12)
#define AML_SDXC_IRQ_STATUS_DMA_DONE (1 << 11)
#define AML_SDXC_IRQ_STATUS_TRANSFER_DONE_OK (1 << 7)
#define AML_SDXC_IRQ_STATUS_A_PKG_CRC_ERR (1 << 6)
#define AML_SDXC_IRQ_STATUS_A_PKG_TIMEOUT_ERR (1 << 5)
#define AML_SDXC_IRQ_STATUS_A_PKG_DONE_OK (1 << 4)
#define AML_SDXC_IRQ_STATUS_RESP_CRC_ERR (1 << 2)
#define AML_SDXC_IRQ_STATUS_RESP_TIMEOUT_ERR (1 << 1)
#define AML_SDXC_IRQ_STATUS_RESP_OK (1 << 0)
#define AML_SDXC_IRQ_STATUS_CLEAR \
(AML_SDXC_IRQ_STATUS_TX_FIFO_EMPTY | \
AML_SDXC_IRQ_STATUS_RX_FIFO_FULL | \
AML_SDXC_IRQ_STATUS_DMA_DONE | \
AML_SDXC_IRQ_STATUS_TRANSFER_DONE_OK | \
AML_SDXC_IRQ_STATUS_A_PKG_CRC_ERR | \
AML_SDXC_IRQ_STATUS_A_PKG_TIMEOUT_ERR | \
AML_SDXC_IRQ_STATUS_RESP_CRC_ERR | \
AML_SDXC_IRQ_STATUS_RESP_TIMEOUT_ERR | \
AML_SDXC_IRQ_STATUS_RESP_OK)
#define AML_SDXC_SOFT_RESET_REG 44
#define AML_SDXC_SOFT_RESET_DMA (1 << 5)
#define AML_SDXC_SOFT_RESET_TX_PHY (1 << 4)
#define AML_SDXC_SOFT_RESET_RX_PHY (1 << 3)
#define AML_SDXC_SOFT_RESET_TX_FIFO (1 << 2)
#define AML_SDXC_SOFT_RESET_RX_FIFO (1 << 1)
#define AML_SDXC_SOFT_RESET_MAIN (1 << 0)
#define AML_SDXC_SOFT_RESET \
(AML_SDXC_SOFT_RESET_DMA | \
AML_SDXC_SOFT_RESET_TX_FIFO | \
AML_SDXC_SOFT_RESET_RX_FIFO | \
AML_SDXC_SOFT_RESET_MAIN)
#define AML_SDXC_ENH_CNTRL_REG 52
#define AML_SDXC_ENH_CNTRL_TX_EMPTY_THOLD_MASK (0x7f << 25)
#define AML_SDXC_ENH_CNTRL_TX_EMPTY_THOLD_SHIFT 25
#define AML_SDXC_ENH_CNTRL_RX_FULL_THOLD_MASK (0x7f << 18)
#define AML_SDXC_ENH_CNTRL_RX_FULL_THOLD_SHIFT 18
#define AML_SDXC_ENH_CNTRL_SDIO_IRQ_PERIOD_MASK (0xff << 8)
#define AML_SDXC_ENH_CNTRL_SDIO_IRQ_PERIOD_SHIFT 8
#define AML_SDXC_ENH_CNTRL_DMA_NO_WR_RESP_CHECK_M8 (1 << 17)
#define AML_SDXC_ENH_CNTRL_DMA_NO_RD_RESP_CHECK_M8 (1 << 16)
#define AML_SDXC_ENH_CNTRL_RX_TIMEOUT_MASK_M8 (0xff << 0)
#define AML_SDXC_ENH_CNTRL_RX_TIMEOUT_SHIFT_M8 0
#define AML_SDXC_ENH_CNTRL_NO_DMA_CHECK_M8M2 (1 << 2)
#define AML_SDXC_ENH_CNTRL_NO_WR_RESP_CHECK_M8M2 (1 << 1)
#define AML_SDXC_ENH_CNTRL_WR_RESP_MODE_SKIP_M8M2 (1 << 0)
#define AML_SDXC_CLK2_REG 56
#define AML_SDXC_CLK2_SD_PHASE_MASK (0x3ff << 12)
#define AML_SDXC_CLK2_SD_PHASE_SHIFT 12
#define AML_SDXC_CLK2_RX_PHASE_MASK (0x3ff << 0)
#define AML_SDXC_CLK2_RX_PHASE_SHIFT 0
#endif /* _ARM_AMLOGIC_AML8726_SDXC_M8_H */