freebsd-skq/usr.sbin/ppp/radius.c
Brian Somers f0cdd9c021 Decouple pap & chap output routines from the corresponding
input routines and take advantage of the new init/continue
interface in libradius.  This allows a timely response on
other links in an MP setup while RADIUS requests are in
progress as well as the ability to handle other data from
the peer in parallel.  It should also make the future addition
of PAM support trivial.

While I'm in there, validate pap & chap header IDs if
``idcheck'' is enabled (the default) for other FSM packet
types.

NOTE: This involved integrating the generation of chap
      challenges and the validation of chap responses
      (and commenting what's going on in those routines).
      I currently have no way of testing ppps ability
      to respond to M$Chap CHALLENGEs correctly, so if
      someone could do the honours, it'd be much
      appreciated (it *looks* ok!).

Sponsored by: Internet Business Solutions Ltd., Switzerland
1999-02-06 02:54:47 +00:00

424 lines
12 KiB
C

/*
* Copyright 1999 Internet Business Solutions Ltd., Switzerland
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: radius.c,v 1.2 1999/01/29 22:46:31 brian Exp $
*
*/
#include <sys/param.h>
#include <netinet/in_systm.h>
#include <netinet/in.h>
#include <netinet/ip.h>
#include <arpa/inet.h>
#include <sys/un.h>
#include <errno.h>
#include <radlib.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/time.h>
#include <termios.h>
#include "defs.h"
#include "log.h"
#include "descriptor.h"
#include "prompt.h"
#include "timer.h"
#include "fsm.h"
#include "iplist.h"
#include "slcompress.h"
#include "throughput.h"
#include "lqr.h"
#include "hdlc.h"
#include "mbuf.h"
#include "ipcp.h"
#include "route.h"
#include "command.h"
#include "filter.h"
#include "lcp.h"
#include "ccp.h"
#include "link.h"
#include "mp.h"
#include "radius.h"
#include "auth.h"
#include "async.h"
#include "physical.h"
#include "chat.h"
#include "cbcp.h"
#include "chap.h"
#include "datalink.h"
#include "bundle.h"
/*
* rad_continue_send_request() has given us `got' (non-zero). Deal with it.
*/
static void
radius_Process(struct radius *r, int got)
{
char *argv[MAXARGS], *nuke;
struct bundle *bundle;
int len, argc, addrs;
struct in_range dest;
struct in_addr gw;
const void *data;
r->cx.fd = -1; /* Stop select()ing */
switch (got) {
case RAD_ACCESS_ACCEPT:
log_Printf(LogPHASE, "Radius: ACCEPT received\n");
break;
case RAD_ACCESS_REJECT:
log_Printf(LogPHASE, "Radius: REJECT received\n");
auth_Failure(r->cx.auth);
rad_close(r->cx.rad);
return;
case RAD_ACCESS_CHALLENGE:
/* we can't deal with this (for now) ! */
log_Printf(LogPHASE, "Radius: CHALLENGE received (can't handle yet)\n");
auth_Failure(r->cx.auth);
rad_close(r->cx.rad);
return;
case -1:
log_Printf(LogPHASE, "radius: %s\n", rad_strerror(r->cx.rad));
auth_Failure(r->cx.auth);
rad_close(r->cx.rad);
return;
default:
log_Printf(LogERROR, "rad_send_request: Failed %d: %s\n",
got, rad_strerror(r->cx.rad));
auth_Failure(r->cx.auth);
rad_close(r->cx.rad);
return;
}
/* So we've been accepted ! Let's see what we've got in our reply :-I */
r->ip.s_addr = r->mask.s_addr = INADDR_NONE;
r->mtu = 0;
r->vj = 0;
while ((got = rad_get_attr(r->cx.rad, &data, &len)) > 0) {
switch (got) {
case RAD_FRAMED_IP_ADDRESS:
r->ip = rad_cvt_addr(data);
log_Printf(LogPHASE, " IP %s\n", inet_ntoa(r->ip));
break;
case RAD_FRAMED_IP_NETMASK:
r->mask = rad_cvt_addr(data);
log_Printf(LogPHASE, " Netmask %s\n", inet_ntoa(r->mask));
break;
case RAD_FRAMED_MTU:
r->mtu = rad_cvt_int(data);
log_Printf(LogPHASE, " MTU %lu\n", r->mtu);
break;
case RAD_FRAMED_ROUTING:
/* Disabled for now - should we automatically set up some filters ? */
/* rad_cvt_int(data); */
/* bit 1 = Send routing packets */
/* bit 2 = Receive routing packets */
break;
case RAD_FRAMED_COMPRESSION:
r->vj = rad_cvt_int(data) == 1 ? 1 : 0;
log_Printf(LogPHASE, " VJ %sabled\n", r->vj ? "en" : "dis");
break;
case RAD_FRAMED_ROUTE:
/*
* We expect a string of the format ``dest[/bits] gw [metrics]''
* Any specified metrics are ignored. MYADDR and HISADDR are
* understood for ``dest'' and ``gw'' and ``0.0.0.0'' is the same
* as ``HISADDR''.
*/
if ((nuke = rad_cvt_string(data, len)) == NULL) {
log_Printf(LogERROR, "rad_cvt_string: %s\n", rad_strerror(r->cx.rad));
rad_close(r->cx.rad);
return;
}
log_Printf(LogPHASE, " Route: %s\n", nuke);
bundle = r->cx.auth->physical->dl->bundle;
dest.ipaddr.s_addr = dest.mask.s_addr = INADDR_ANY;
dest.width = 0;
argc = command_Interpret(nuke, strlen(nuke), argv);
if (argc < 2)
log_Printf(LogWARN, "radius: %s: Invalid route\n",
argc == 1 ? argv[0] : "\"\"");
else if ((strcasecmp(argv[0], "default") != 0 &&
!ParseAddr(&bundle->ncp.ipcp, argv[0], &dest.ipaddr,
&dest.mask, &dest.width)) ||
!ParseAddr(&bundle->ncp.ipcp, argv[1], &gw, NULL, NULL))
log_Printf(LogWARN, "radius: %s %s: Invalid route\n",
argv[0], argv[1]);
else {
if (dest.width == 32 && strchr(argv[0], '/') == NULL)
/* No mask specified - use the natural mask */
dest.mask.s_addr = addr2mask(dest.ipaddr.s_addr);
addrs = 0;
if (!strncasecmp(argv[0], "HISADDR", 7))
addrs = ROUTE_DSTHISADDR;
else if (!strncasecmp(argv[0], "MYADDR", 6))
addrs = ROUTE_DSTMYADDR;
if (gw.s_addr == INADDR_ANY) {
addrs |= ROUTE_GWHISADDR;
gw = bundle->ncp.ipcp.peer_ip;
} else if (strcasecmp(argv[1], "HISADDR") == 0)
addrs |= ROUTE_GWHISADDR;
route_Add(&r->routes, addrs, dest.ipaddr, dest.mask, gw);
}
free(nuke);
break;
}
}
if (got == -1) {
log_Printf(LogERROR, "rad_get_attr: %s (failing!)\n",
rad_strerror(r->cx.rad));
auth_Failure(r->cx.auth);
rad_close(r->cx.rad);
} else {
r->valid = 1;
auth_Success(r->cx.auth);
rad_close(r->cx.rad);
}
}
/*
* We've either timed out or select()ed on the read descriptor
*/
static void
radius_Continue(struct radius *r, int sel)
{
struct timeval tv;
int got;
timer_Stop(&r->cx.timer);
if ((got = rad_continue_send_request(r->cx.rad, sel, &r->cx.fd, &tv)) == 0) {
log_Printf(LogPHASE, "Radius: Request re-sent\n");
r->cx.timer.load = tv.tv_usec / TICKUNIT + tv.tv_sec * SECTICKS;
timer_Start(&r->cx.timer);
return;
}
radius_Process(r, got);
}
/*
* Time to call rad_continue_send_request() - timed out.
*/
static void
radius_Timeout(void *v)
{
radius_Continue((struct radius *)v, 0);
}
/*
* Time to call rad_continue_send_request() - something to read.
*/
static void
radius_Read(struct descriptor *d, struct bundle *bundle, const fd_set *fdset)
{
radius_Continue(descriptor2radius(d), 1);
}
/*
* Behave as a struct descriptor (descriptor.h)
*/
static int
radius_UpdateSet(struct descriptor *d, fd_set *r, fd_set *w, fd_set *e, int *n)
{
struct radius *rad = descriptor2radius(d);
if (r && rad->cx.fd != -1) {
FD_SET(rad->cx.fd, r);
if (*n < rad->cx.fd + 1)
*n = rad->cx.fd + 1;
log_Printf(LogTIMER, "Radius: fdset(r) %d\n", rad->cx.fd);
return 1;
}
return 0;
}
/*
* Behave as a struct descriptor (descriptor.h)
*/
static int
radius_IsSet(struct descriptor *d, const fd_set *fdset)
{
struct radius *r = descriptor2radius(d);
return r && r->cx.fd != -1 && FD_ISSET(r->cx.fd, fdset);
}
/*
* Behave as a struct descriptor (descriptor.h)
*/
static int
radius_Write(struct descriptor *d, struct bundle *bundle, const fd_set *fdset)
{
/* We never want to write here ! */
log_Printf(LogALERT, "radius_Write: Internal error: Bad call !\n");
return 0;
}
/*
* Initialise ourselves
*/
void
radius_Init(struct radius *r)
{
r->valid = 0;
r->cx.fd = -1;
*r->cfg.file = '\0';;
r->desc.type = RADIUS_DESCRIPTOR;
r->desc.UpdateSet = radius_UpdateSet;
r->desc.IsSet = radius_IsSet;
r->desc.Read = radius_Read;
r->desc.Write = radius_Write;
memset(&r->cx.timer, '\0', sizeof r->cx.timer);
}
/*
* Forget everything and go back to initialised state.
*/
void
radius_Destroy(struct radius *r)
{
r->valid = 0;
timer_Stop(&r->cx.timer);
route_DeleteAll(&r->routes);
if (r->cx.fd != -1) {
r->cx.fd = -1;
rad_close(r->cx.rad);
}
}
/*
* Start an authentication request to the RADIUS server.
*/
void
radius_Authenticate(struct radius *r, struct authinfo *authp, const char *name,
const char *key, const char *challenge)
{
struct timeval tv;
int got;
if (!*r->cfg.file)
return;
if (r->cx.fd != -1)
/*
* We assume that our name/key/challenge is the same as last time,
* and just continue to wait for the RADIUS server(s).
*/
return;
radius_Destroy(r);
if ((r->cx.rad = rad_open()) == NULL) {
log_Printf(LogERROR, "rad_open: %s\n", strerror(errno));
return;
}
if (rad_config(r->cx.rad, r->cfg.file) != 0) {
log_Printf(LogERROR, "rad_config: %s\n", rad_strerror(r->cx.rad));
rad_close(r->cx.rad);
return;
}
if (rad_create_request(r->cx.rad, RAD_ACCESS_REQUEST) != 0) {
log_Printf(LogERROR, "rad_create_request: %s\n", rad_strerror(r->cx.rad));
rad_close(r->cx.rad);
return;
}
if (rad_put_string(r->cx.rad, RAD_USER_NAME, name) != 0 ||
rad_put_int(r->cx.rad, RAD_SERVICE_TYPE, RAD_FRAMED) != 0 ||
rad_put_int(r->cx.rad, RAD_FRAMED_PROTOCOL, RAD_PPP) != 0) {
log_Printf(LogERROR, "rad_put: %s\n", rad_strerror(r->cx.rad));
rad_close(r->cx.rad);
return;
}
if (challenge != NULL) {
/* We're talking CHAP */
if (rad_put_string(r->cx.rad, RAD_CHAP_PASSWORD, key) != 0 ||
rad_put_string(r->cx.rad, RAD_CHAP_CHALLENGE, challenge) != 0) {
log_Printf(LogERROR, "CHAP: rad_put_string: %s\n",
rad_strerror(r->cx.rad));
rad_close(r->cx.rad);
return;
}
} else if (rad_put_string(r->cx.rad, RAD_USER_PASSWORD, key) != 0) {
/* We're talking PAP */
log_Printf(LogERROR, "PAP: rad_put_string: %s\n", rad_strerror(r->cx.rad));
rad_close(r->cx.rad);
return;
}
if ((got = rad_init_send_request(r->cx.rad, &r->cx.fd, &tv)))
radius_Process(r, got);
else {
log_Printf(LogPHASE, "Radius: Request sent\n");
log_Printf(LogDEBUG, "Using radius_Timeout [%p]\n", radius_Timeout);
r->cx.timer.load = tv.tv_usec / TICKUNIT + tv.tv_sec * SECTICKS;
r->cx.timer.func = radius_Timeout;
r->cx.timer.name = "radius";
r->cx.timer.arg = r;
r->cx.auth = authp;
timer_Start(&r->cx.timer);
}
}
/*
* How do things look at the moment ?
*/
void
radius_Show(struct radius *r, struct prompt *p)
{
prompt_Printf(p, " Radius config: %s", *r->cfg.file ? r->cfg.file : "none");
if (r->valid) {
prompt_Printf(p, "\n IP: %s\n", inet_ntoa(r->ip));
prompt_Printf(p, " Netmask: %s\n", inet_ntoa(r->mask));
prompt_Printf(p, " MTU: %lu\n", r->mtu);
prompt_Printf(p, " VJ: %sabled\n", r->vj ? "en" : "dis");
if (r->routes)
route_ShowSticky(p, r->routes, " Routes", 16);
} else
prompt_Printf(p, " (not authenticated)\n");
}