2266d743ca
This driver was generously developed and donated by Highpoint. It is enabled for i386 only at the moment. I will enable it for amd64 shortly. Obtained from: HighPoint Technologies, Inc.
1648 lines
52 KiB
C
1648 lines
52 KiB
C
#include <dev/rr232x/rr232x_config.h>
|
|
/* $Id: hptintf.h,v 1.38 2006/02/16 03:29:07 gmm Exp $
|
|
* Copyright (C) 2004-2005 HighPoint Technologies, Inc. All rights reserved.
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*
|
|
* File: hptintf.h
|
|
* Description: ioctl interface for HPT RAID driver
|
|
* Author: Gu Mingming
|
|
* History: 2001-2-15 initial code
|
|
* 2001-4-5 change based on discuss with Dahai and Robin
|
|
* v1.0.0.1
|
|
* 2001-7-17 add option to delete_array
|
|
* v1.0.0.2
|
|
* 2001-12-5 Add hpt_get_driver_capabilities
|
|
* v1.0.0.3
|
|
* 2002-1-11 Add HPT601 interface
|
|
* 2002-3-7 add hpt_lock/unlock_device
|
|
* 2002-4-22 S.M.A.R.T. interface
|
|
* RAID5 rebuild/verify
|
|
* Dedicated spare disk
|
|
* 2003-3-18 RAID1.5 plus
|
|
* Don't change version until all GUI get updated.
|
|
* 2003-4-23 hotswap capbility
|
|
* v1.1.0.0
|
|
* 2003-11-17 define HPT_INTERFACE_VERSION outside this file;
|
|
* enlarge max array members.
|
|
* 64-bit LBA support.
|
|
* v2.0.0.0
|
|
* 2004-11-01 new functions to support OCE/ORLM
|
|
*/
|
|
|
|
#ifndef HPT_INTF_H
|
|
#define HPT_INTF_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#ifndef __GNUC__
|
|
#define __attribute__(x)
|
|
#endif
|
|
|
|
#pragma pack(1)
|
|
|
|
/*
|
|
* Version of this interface.
|
|
* The user mode application must first issue a hpt_get_version() call to
|
|
* check HPT_INTERFACE_VERSION. When an utility using newer version interface
|
|
* is used with old version drivers, it must call only the functions that
|
|
* driver supported.
|
|
* A new version interface should only add ioctl functions; it should implement
|
|
* all old version functions without change their definition.
|
|
*/
|
|
#define __this_HPT_INTERFACE_VERSION 0x02000000
|
|
|
|
#ifndef HPT_INTERFACE_VERSION
|
|
#error "You must define HPT_INTERFACE_VERSION you implemented"
|
|
#endif
|
|
|
|
#if HPT_INTERFACE_VERSION > __this_HPT_INTERFACE_VERSION
|
|
#error "HPT_INTERFACE_VERSION is invalid"
|
|
#endif
|
|
|
|
/*
|
|
* DEFINITION
|
|
* Logical device --- a device that can be accessed by OS.
|
|
* Physical device --- device attached to the controller.
|
|
* A logical device can be simply a physical device.
|
|
*
|
|
* Each logical and physical device has a 32bit ID. GUI will use this ID
|
|
* to identify devices.
|
|
* 1. The ID must be unique.
|
|
* 2. The ID must be immutable. Once an ID is assigned to a device, it
|
|
* must not change when system is running and the device exists.
|
|
* 3. The ID of logical device must be NOT reusable. If a device is
|
|
* removed, other newly created logical device must not use the same ID.
|
|
* 4. The ID must not be zero or 0xFFFFFFFF.
|
|
*/
|
|
typedef HPT_U32 DEVICEID;
|
|
|
|
/*
|
|
* logical device type.
|
|
* Identify array (logical device) and physical device.
|
|
*/
|
|
#define LDT_ARRAY 1
|
|
#define LDT_DEVICE 2
|
|
|
|
/*
|
|
* Array types
|
|
* GUI will treat all array as 1-level RAID. No RAID0/1 or RAID1/0.
|
|
* A RAID0/1 device is type AT_RAID1. A RAID1/0 device is type AT_RAID0.
|
|
* Their members may be another array of type RAID0 or RAID1.
|
|
*/
|
|
#define AT_UNKNOWN 0
|
|
#define AT_RAID0 1
|
|
#define AT_RAID1 2
|
|
#define AT_RAID5 3
|
|
#define AT_RAID6 4
|
|
#define AT_JBOD 7
|
|
|
|
/*
|
|
* physical device type
|
|
*/
|
|
#define PDT_UNKNOWN 0
|
|
#define PDT_HARDDISK 1
|
|
#define PDT_CDROM 2
|
|
#define PDT_TAPE 3
|
|
|
|
/*
|
|
* Some constants.
|
|
*/
|
|
#define MAX_NAME_LENGTH 36
|
|
#define MAX_ARRAYNAME_LEN 16
|
|
|
|
#define MAX_ARRAY_MEMBERS_V1 8
|
|
|
|
#ifndef MAX_ARRAY_MEMBERS_V2
|
|
#define MAX_ARRAY_MEMBERS_V2 16
|
|
#endif
|
|
|
|
/* keep definition for source code compatiblity */
|
|
#define MAX_ARRAY_MEMBERS MAX_ARRAY_MEMBERS_V1
|
|
|
|
/*
|
|
* io commands
|
|
* GUI use these commands to do IO on logical/physical devices.
|
|
*/
|
|
#define IO_COMMAND_READ 1
|
|
#define IO_COMMAND_WRITE 2
|
|
|
|
/* redundant arrays (RAID1 and RAID5, RAID10) have two creation format:
|
|
* 1. forground create --- zero all data on the array, and the array should not be reported to os before end of initialization.
|
|
* if initializing aborted, turns to background initialize.
|
|
* 2. backround create --- rebuild all data on the array, and the array can be reported to os just after creation.
|
|
*
|
|
* if an array is in forground creation progress, it has the flag ARRAY_FLAG_NEEDINITIALIZING and ARRAY_FLAG_INITIALIZING,
|
|
* GUI sends the INIT ioctl, driver zero the data of the array.
|
|
* if an array is in backround creation progress, it has flag ARRAY_FLAG_NEEDINITIALIZING and ARRAY_FLAG_REBUIDING.
|
|
* GUI sends the REBUILD ioctl, driver rebuilds the array.
|
|
*/
|
|
|
|
|
|
/*
|
|
* array flags
|
|
*/
|
|
#define ARRAY_FLAG_DISABLED 0x00000001 /* The array is disabled */
|
|
#define ARRAY_FLAG_NEEDBUILDING 0x00000002 /* array data need to be rebuilt */
|
|
#define ARRAY_FLAG_REBUILDING 0x00000004 /* array is in rebuilding process */
|
|
#define ARRAY_FLAG_BROKEN 0x00000008 /* broken but may still working */
|
|
#define ARRAY_FLAG_BOOTDISK 0x00000010 /* array has a active partition */
|
|
|
|
#define ARRAY_FLAG_BOOTMARK 0x00000040 /* array has boot mark set */
|
|
#define ARRAY_FLAG_NEED_AUTOREBUILD 0x00000080 /* auto-rebuild should start */
|
|
#define ARRAY_FLAG_VERIFYING 0x00000100 /* is being verified */
|
|
#define ARRAY_FLAG_INITIALIZING 0x00000200 /* is being initialized */
|
|
#define ARRAY_FLAG_TRANSFORMING 0x00000400 /* tranform in progress */
|
|
#define ARRAY_FLAG_NEEDTRANSFORM 0x00000800 /* array need tranform */
|
|
#define ARRAY_FLAG_NEEDINITIALIZING 0x00001000 /* the array's initialization hasn't finished*/
|
|
#define ARRAY_FLAG_BROKEN_REDUNDANT 0x00002000 /* broken but redundant (raid6) */
|
|
#define ARRAY_FLAG_RAID15PLUS 0x80000000 /* display this RAID 1 as RAID 1.5 */
|
|
/*
|
|
* device flags
|
|
*/
|
|
#define DEVICE_FLAG_DISABLED 0x00000001 /* device is disabled */
|
|
#define DEVICE_FLAG_BOOTDISK 0x00000002 /* disk has a active partition */
|
|
#define DEVICE_FLAG_BOOTMARK 0x00000004 /* disk has boot mark set */
|
|
#define DEVICE_FLAG_WITH_601 0x00000008 /* has HPT601 connected */
|
|
#define DEVICE_FLAG_SATA 0x00000010 /* S-ATA device */
|
|
|
|
#define DEVICE_FLAG_UNINITIALIZED 0x00010000 /* device is not initialized, can't be used to create array */
|
|
#define DEVICE_FLAG_LEGACY 0x00020000 /* single disk & mbr contains at least one partition */
|
|
|
|
#define DEVICE_FLAG_IS_SPARE 0x80000000 /* is a spare disk */
|
|
|
|
/*
|
|
* array states used by hpt_set_array_state()
|
|
*/
|
|
/* old defines */
|
|
#define MIRROR_REBUILD_START 1
|
|
#define MIRROR_REBUILD_ABORT 2
|
|
#define MIRROR_REBUILD_COMPLETE 3
|
|
/* new defines */
|
|
#define AS_REBUILD_START 1
|
|
#define AS_REBUILD_ABORT 2
|
|
#define AS_REBUILD_PAUSE AS_REBUILD_ABORT
|
|
#define AS_REBUILD_COMPLETE 3
|
|
#define AS_VERIFY_START 4
|
|
#define AS_VERIFY_ABORT 5
|
|
#define AS_VERIFY_COMPLETE 6
|
|
#define AS_INITIALIZE_START 7
|
|
#define AS_INITIALIZE_ABORT 8
|
|
#define AS_INITIALIZE_COMPLETE 9
|
|
#define AS_VERIFY_FAILED 10
|
|
#define AS_REBUILD_STOP 11
|
|
#define AS_SAVE_STATE 12
|
|
#define AS_TRANSFORM_START 13
|
|
#define AS_TRANSFORM_ABORT 14
|
|
|
|
/************************************************************************
|
|
* ioctl code
|
|
* It would be better if ioctl code are the same on different platforms,
|
|
* but we must not conflict with system defined ioctl code.
|
|
************************************************************************/
|
|
#if defined(LINUX) || defined(__FreeBSD_version) || defined(linux)
|
|
#define HPT_CTL_CODE(x) (x+0xFF00)
|
|
#define HPT_CTL_CODE_LINUX_TO_IOP(x) ((x)-0xff00)
|
|
#elif defined(_MS_WIN32_) || defined(WIN32)
|
|
|
|
#ifndef CTL_CODE
|
|
#define CTL_CODE( DeviceType, Function, Method, Access ) \
|
|
(((DeviceType) << 16) | ((Access) << 14) | ((Function) << 2) | (Method))
|
|
#endif
|
|
#define HPT_CTL_CODE(x) CTL_CODE(0x370, 0x900+(x), 0, 0)
|
|
#define HPT_CTL_CODE_WIN32_TO_IOP(x) ((((x) & 0xffff)>>2)-0x900)
|
|
|
|
#else
|
|
#define HPT_CTL_CODE(x) (x)
|
|
#endif
|
|
|
|
#define HPT_IOCTL_GET_VERSION HPT_CTL_CODE(0)
|
|
#define HPT_IOCTL_GET_CONTROLLER_COUNT HPT_CTL_CODE(1)
|
|
#define HPT_IOCTL_GET_CONTROLLER_INFO HPT_CTL_CODE(2)
|
|
#define HPT_IOCTL_GET_CHANNEL_INFO HPT_CTL_CODE(3)
|
|
#define HPT_IOCTL_GET_LOGICAL_DEVICES HPT_CTL_CODE(4)
|
|
#define HPT_IOCTL_GET_DEVICE_INFO HPT_CTL_CODE(5)
|
|
#define HPT_IOCTL_CREATE_ARRAY HPT_CTL_CODE(6)
|
|
#define HPT_IOCTL_DELETE_ARRAY HPT_CTL_CODE(7)
|
|
#define HPT_IOCTL_ARRAY_IO HPT_CTL_CODE(8)
|
|
#define HPT_IOCTL_DEVICE_IO HPT_CTL_CODE(9)
|
|
#define HPT_IOCTL_GET_EVENT HPT_CTL_CODE(10)
|
|
#define HPT_IOCTL_REBUILD_MIRROR HPT_CTL_CODE(11)
|
|
/* use HPT_IOCTL_REBUILD_DATA_BLOCK from now on */
|
|
#define HPT_IOCTL_REBUILD_DATA_BLOCK HPT_IOCTL_REBUILD_MIRROR
|
|
#define HPT_IOCTL_ADD_SPARE_DISK HPT_CTL_CODE(12)
|
|
#define HPT_IOCTL_REMOVE_SPARE_DISK HPT_CTL_CODE(13)
|
|
#define HPT_IOCTL_ADD_DISK_TO_ARRAY HPT_CTL_CODE(14)
|
|
#define HPT_IOCTL_SET_ARRAY_STATE HPT_CTL_CODE(15)
|
|
#define HPT_IOCTL_SET_ARRAY_INFO HPT_CTL_CODE(16)
|
|
#define HPT_IOCTL_SET_DEVICE_INFO HPT_CTL_CODE(17)
|
|
#define HPT_IOCTL_RESCAN_DEVICES HPT_CTL_CODE(18)
|
|
#define HPT_IOCTL_GET_DRIVER_CAPABILITIES HPT_CTL_CODE(19)
|
|
#define HPT_IOCTL_GET_601_INFO HPT_CTL_CODE(20)
|
|
#define HPT_IOCTL_SET_601_INFO HPT_CTL_CODE(21)
|
|
#define HPT_IOCTL_LOCK_DEVICE HPT_CTL_CODE(22)
|
|
#define HPT_IOCTL_UNLOCK_DEVICE HPT_CTL_CODE(23)
|
|
#define HPT_IOCTL_IDE_PASS_THROUGH HPT_CTL_CODE(24)
|
|
#define HPT_IOCTL_VERIFY_DATA_BLOCK HPT_CTL_CODE(25)
|
|
#define HPT_IOCTL_INITIALIZE_DATA_BLOCK HPT_CTL_CODE(26)
|
|
#define HPT_IOCTL_ADD_DEDICATED_SPARE HPT_CTL_CODE(27)
|
|
#define HPT_IOCTL_DEVICE_IO_EX HPT_CTL_CODE(28)
|
|
#define HPT_IOCTL_SET_BOOT_MARK HPT_CTL_CODE(29)
|
|
#define HPT_IOCTL_QUERY_REMOVE HPT_CTL_CODE(30)
|
|
#define HPT_IOCTL_REMOVE_DEVICES HPT_CTL_CODE(31)
|
|
#define HPT_IOCTL_CREATE_ARRAY_V2 HPT_CTL_CODE(32)
|
|
#define HPT_IOCTL_GET_DEVICE_INFO_V2 HPT_CTL_CODE(33)
|
|
#define HPT_IOCTL_SET_DEVICE_INFO_V2 HPT_CTL_CODE(34)
|
|
#define HPT_IOCTL_REBUILD_DATA_BLOCK_V2 HPT_CTL_CODE(35)
|
|
#define HPT_IOCTL_VERIFY_DATA_BLOCK_V2 HPT_CTL_CODE(36)
|
|
#define HPT_IOCTL_INITIALIZE_DATA_BLOCK_V2 HPT_CTL_CODE(37)
|
|
#define HPT_IOCTL_LOCK_DEVICE_V2 HPT_CTL_CODE(38)
|
|
#define HPT_IOCTL_DEVICE_IO_V2 HPT_CTL_CODE(39)
|
|
#define HPT_IOCTL_DEVICE_IO_EX_V2 HPT_CTL_CODE(40)
|
|
#define HPT_IOCTL_CREATE_TRANSFORM HPT_CTL_CODE(41)
|
|
#define HPT_IOCTL_STEP_TRANSFORM HPT_CTL_CODE(42)
|
|
#define HPT_IOCTL_SET_VDEV_INFO HPT_CTL_CODE(43)
|
|
#define HPT_IOCTL_CALC_MAX_CAPACITY HPT_CTL_CODE(44)
|
|
#define HPT_IOCTL_INIT_DISKS HPT_CTL_CODE(45)
|
|
#define HPT_IOCTL_GET_DEVICE_INFO_V3 HPT_CTL_CODE(46)
|
|
#define HPT_IOCTL_GET_CONTROLLER_INFO_V2 HPT_CTL_CODE(47)
|
|
#define HPT_IOCTL_I2C_TRANSACTION HPT_CTL_CODE(48)
|
|
#define HPT_IOCTL_GET_PARAMETER_LIST HPT_CTL_CODE(49)
|
|
#define HPT_IOCTL_GET_PARAMETER HPT_CTL_CODE(50)
|
|
#define HPT_IOCTL_SET_PARAMETER HPT_CTL_CODE(51)
|
|
|
|
|
|
#define HPT_IOCTL_GET_CONTROLLER_IDS HPT_CTL_CODE(100)
|
|
#define HPT_IOCTL_GET_DCB HPT_CTL_CODE(101)
|
|
|
|
#define HPT_IOCTL_EPROM_IO HPT_CTL_CODE(102)
|
|
#define HPT_IOCTL_GET_CONTROLLER_VENID HPT_CTL_CODE(103)
|
|
|
|
/************************************************************************
|
|
* shared data structures
|
|
************************************************************************/
|
|
|
|
/*
|
|
* Chip Type
|
|
*/
|
|
#define CHIP_TYPE_HPT366 1
|
|
#define CHIP_TYPE_HPT368 2
|
|
#define CHIP_TYPE_HPT370 3
|
|
#define CHIP_TYPE_HPT370A 4
|
|
#define CHIP_TYPE_HPT370B 5
|
|
#define CHIP_TYPE_HPT374 6
|
|
#define CHIP_TYPE_HPT372 7
|
|
#define CHIP_TYPE_HPT372A 8
|
|
#define CHIP_TYPE_HPT302 9
|
|
#define CHIP_TYPE_HPT371 10
|
|
#define CHIP_TYPE_HPT372N 11
|
|
#define CHIP_TYPE_HPT302N 12
|
|
#define CHIP_TYPE_HPT371N 13
|
|
#define CHIP_TYPE_SI3112A 14
|
|
#define CHIP_TYPE_ICH5 15
|
|
#define CHIP_TYPE_ICH5R 16
|
|
|
|
/*
|
|
* Chip Flags
|
|
*/
|
|
#define CHIP_SUPPORT_ULTRA_66 0x20
|
|
#define CHIP_SUPPORT_ULTRA_100 0x40
|
|
#define CHIP_HPT3XX_DPLL_MODE 0x80
|
|
#define CHIP_SUPPORT_ULTRA_133 0x01
|
|
#define CHIP_SUPPORT_ULTRA_150 0x02
|
|
#define CHIP_MASTER 0x04
|
|
#define CHIP_SUPPORT_SATA_300 0x08
|
|
|
|
#define HPT_SPIN_UP_MODE_NOSUPPORT 0
|
|
#define HPT_SPIN_UP_MODE_FULL 1
|
|
#define HPT_SPIN_UP_MODE_STANDBY 2
|
|
|
|
typedef struct _DRIVER_CAPABILITIES {
|
|
HPT_U32 dwSize;
|
|
|
|
HPT_U8 MaximumControllers; /* maximum controllers the driver can support */
|
|
HPT_U8 SupportCrossControllerRAID; /* 1-support, 0-not support */
|
|
HPT_U8 MinimumBlockSizeShift; /* minimum block size shift */
|
|
HPT_U8 MaximumBlockSizeShift; /* maximum block size shift */
|
|
|
|
HPT_U8 SupportDiskModeSetting;
|
|
HPT_U8 SupportSparePool;
|
|
HPT_U8 MaximumArrayNameLength;
|
|
/* only one HPT_U8 left here! */
|
|
#ifdef __BIG_ENDIAN_BITFIELD
|
|
HPT_U8 reserved: 4;
|
|
HPT_U8 SupportHotSwap: 1;
|
|
HPT_U8 HighPerformanceRAID1: 1;
|
|
HPT_U8 RebuildProcessInDriver: 1;
|
|
HPT_U8 SupportDedicatedSpare: 1;
|
|
#else
|
|
HPT_U8 SupportDedicatedSpare: 1; /* call hpt_add_dedicated_spare() for dedicated spare. */
|
|
HPT_U8 RebuildProcessInDriver: 1; /* Windows only. used by mid layer for rebuild control. */
|
|
HPT_U8 HighPerformanceRAID1: 1; /* Support RAID1.5 */
|
|
HPT_U8 SupportHotSwap: 1;
|
|
HPT_U8 reserved: 4;
|
|
#endif
|
|
|
|
/* SupportedRAIDTypes is an array of bytes, one of each is an array type.
|
|
* Only non-zero values is valid. Bit0-3 represents the lower(child) level RAID type;
|
|
* bit4-7 represents the top level. i.e.
|
|
* RAID 0/1 is (AT_RAID1<<4) | AT_RAID0
|
|
* RAID 5/0 is (AT_RAID0<<4) | AT_RAID5
|
|
*/
|
|
HPT_U8 SupportedRAIDTypes[16];
|
|
/* maximum members in an array corresponding to SupportedRAIDTypes */
|
|
HPT_U8 MaximumArrayMembers[16];
|
|
}
|
|
DRIVER_CAPABILITIES, *PDRIVER_CAPABILITIES;
|
|
|
|
/*
|
|
* Controller information.
|
|
*/
|
|
typedef struct _CONTROLLER_INFO {
|
|
HPT_U8 ChipType; /* chip type */
|
|
HPT_U8 InterruptLevel; /* IRQ level */
|
|
HPT_U8 NumBuses; /* bus count */
|
|
HPT_U8 ChipFlags;
|
|
|
|
HPT_U8 szProductID[MAX_NAME_LENGTH]; /* product name */
|
|
HPT_U8 szVendorID[MAX_NAME_LENGTH]; /* vender name */
|
|
|
|
} CONTROLLER_INFO, *PCONTROLLER_INFO;
|
|
|
|
#if HPT_INTERFACE_VERSION>=0x01020000
|
|
typedef struct _CONTROLLER_INFO_V2 {
|
|
HPT_U8 ChipType; /* chip type */
|
|
HPT_U8 InterruptLevel; /* IRQ level */
|
|
HPT_U8 NumBuses; /* bus count */
|
|
HPT_U8 ChipFlags;
|
|
|
|
HPT_U8 szProductID[MAX_NAME_LENGTH]; /* product name */
|
|
HPT_U8 szVendorID[MAX_NAME_LENGTH]; /* vender name */
|
|
|
|
HPT_U32 GroupId; /* low 32bit of vbus pointer the controller belongs
|
|
* the master controller has CHIP_MASTER flag set*/
|
|
HPT_U8 pci_tree;
|
|
HPT_U8 pci_bus;
|
|
HPT_U8 pci_device;
|
|
HPT_U8 pci_function;
|
|
|
|
HPT_U32 reserved;
|
|
} CONTROLLER_INFO_V2, *PCONTROLLER_INFO_V2;
|
|
#endif
|
|
/*
|
|
* Channel information.
|
|
*/
|
|
typedef struct _CHANNEL_INFO {
|
|
HPT_U32 IoPort; /* IDE Base Port Address */
|
|
HPT_U32 ControlPort; /* IDE Control Port Address */
|
|
|
|
DEVICEID Devices[2]; /* device connected to this channel */
|
|
|
|
} CHANNEL_INFO, *PCHANNEL_INFO;
|
|
|
|
/*
|
|
* time represented in HPT_U32 format
|
|
*/
|
|
#ifndef __KERNEL__
|
|
typedef struct _TIME_RECORD {
|
|
HPT_U32 seconds:6; /* 0 - 59 */
|
|
HPT_U32 minutes:6; /* 0 - 59 */
|
|
HPT_U32 month:4; /* 1 - 12 */
|
|
HPT_U32 hours:6; /* 0 - 59 */
|
|
HPT_U32 day:5; /* 1 - 31 */
|
|
HPT_U32 year:5; /* 0=2000, 31=2031 */
|
|
} TIME_RECORD;
|
|
#endif
|
|
|
|
/*
|
|
* Array information.
|
|
*/
|
|
typedef struct _HPT_ARRAY_INFO {
|
|
HPT_U8 Name[MAX_ARRAYNAME_LEN];/* array name */
|
|
HPT_U8 Description[64]; /* array description */
|
|
HPT_U8 CreateManager[16]; /* who created it */
|
|
TIME_RECORD CreateTime; /* when created it */
|
|
|
|
HPT_U8 ArrayType; /* array type */
|
|
HPT_U8 BlockSizeShift; /* stripe size */
|
|
HPT_U8 nDisk; /* member count: Number of ID in Members[] */
|
|
HPT_U8 reserved;
|
|
|
|
HPT_U32 Flags; /* working flags, see ARRAY_FLAG_XXX */
|
|
HPT_U32 Members[MAX_ARRAY_MEMBERS_V1]; /* member array/disks */
|
|
|
|
/*
|
|
* rebuilding progress, xx.xx% = sprintf(s, "%.2f%%", RebuildingProgress/100.0);
|
|
* only valid if rebuilding is done by driver code.
|
|
* Member Flags will have ARRAY_FLAG_REBUILDING set at this case.
|
|
* Verify operation use same fields below, the only difference is
|
|
* ARRAY_FLAG_VERIFYING is set.
|
|
*/
|
|
HPT_U32 RebuildingProgress;
|
|
HPT_U32 RebuiltSectors; /* rebuilding point (LBA) for single member */
|
|
|
|
} HPT_ARRAY_INFO, *PHPT_ARRAY_INFO; /*LDX modify ARRAY_INFO TO HPT_ARRAY_INFO to avoid compiling error in Windows*/
|
|
|
|
#if HPT_INTERFACE_VERSION>=0x01010000
|
|
typedef struct _HPT_ARRAY_INFO_V2 {
|
|
HPT_U8 Name[MAX_ARRAYNAME_LEN];/* array name */
|
|
HPT_U8 Description[64]; /* array description */
|
|
HPT_U8 CreateManager[16]; /* who created it */
|
|
TIME_RECORD CreateTime; /* when created it */
|
|
|
|
HPT_U8 ArrayType; /* array type */
|
|
HPT_U8 BlockSizeShift; /* stripe size */
|
|
HPT_U8 nDisk; /* member count: Number of ID in Members[] */
|
|
HPT_U8 reserved;
|
|
|
|
HPT_U32 Flags; /* working flags, see ARRAY_FLAG_XXX */
|
|
HPT_U32 Members[MAX_ARRAY_MEMBERS_V2]; /* member array/disks */
|
|
|
|
HPT_U32 RebuildingProgress;
|
|
HPT_U64 RebuiltSectors; /* rebuilding point (LBA) for single member */
|
|
|
|
HPT_U32 reserve4[4];
|
|
} HPT_ARRAY_INFO_V2, *PHPT_ARRAY_INFO_V2;
|
|
#endif
|
|
|
|
#if HPT_INTERFACE_VERSION>=0x01020000
|
|
typedef struct _HPT_ARRAY_INFO_V3 {
|
|
HPT_U8 Name[MAX_ARRAYNAME_LEN];/* array name */
|
|
HPT_U8 Description[64]; /* array description */
|
|
HPT_U8 CreateManager[16]; /* who created it */
|
|
TIME_RECORD CreateTime; /* when created it */
|
|
|
|
HPT_U8 ArrayType; /* array type */
|
|
HPT_U8 BlockSizeShift; /* stripe size */
|
|
HPT_U8 nDisk; /* member count: Number of ID in Members[] */
|
|
HPT_U8 reserved;
|
|
|
|
HPT_U32 Flags; /* working flags, see ARRAY_FLAG_XXX */
|
|
HPT_U32 Members[MAX_ARRAY_MEMBERS_V2]; /* member array/disks */
|
|
|
|
HPT_U32 RebuildingProgress;
|
|
HPT_U64 RebuiltSectors; /* rebuilding point (LBA) for single member */
|
|
|
|
DEVICEID TransformSource;
|
|
DEVICEID TransformTarget; /* destination device ID */
|
|
HPT_U32 TransformingProgress;
|
|
HPT_U32 Signature; /* persistent identification*/
|
|
#if MAX_ARRAY_MEMBERS_V2==16
|
|
HPT_U16 Critical_Members; /*bit mask of critical members*/
|
|
HPT_U16 reserve2;
|
|
HPT_U32 reserve;
|
|
#else
|
|
HPT_U32 Critical_Members;
|
|
HPT_U32 reserve;
|
|
#endif
|
|
} HPT_ARRAY_INFO_V3, *PHPT_ARRAY_INFO_V3;
|
|
#endif
|
|
/*
|
|
* ATA/ATAPI Device identify data without the Reserved4.
|
|
*/
|
|
#ifndef __KERNEL__
|
|
typedef struct _IDENTIFY_DATA2 {
|
|
HPT_U16 GeneralConfiguration;
|
|
HPT_U16 NumberOfCylinders;
|
|
HPT_U16 Reserved1;
|
|
HPT_U16 NumberOfHeads;
|
|
HPT_U16 UnformattedBytesPerTrack;
|
|
HPT_U16 UnformattedBytesPerSector;
|
|
HPT_U16 SectorsPerTrack;
|
|
HPT_U16 VendorUnique1[3];
|
|
HPT_U16 SerialNumber[10];
|
|
HPT_U16 BufferType;
|
|
HPT_U16 BufferSectorSize;
|
|
HPT_U16 NumberOfEccBytes;
|
|
HPT_U16 FirmwareRevision[4];
|
|
HPT_U16 ModelNumber[20];
|
|
HPT_U8 MaximumBlockTransfer;
|
|
HPT_U8 VendorUnique2;
|
|
HPT_U16 DoubleWordIo;
|
|
HPT_U16 Capabilities;
|
|
HPT_U16 Reserved2;
|
|
HPT_U8 VendorUnique3;
|
|
HPT_U8 PioCycleTimingMode;
|
|
HPT_U8 VendorUnique4;
|
|
HPT_U8 DmaCycleTimingMode;
|
|
HPT_U16 TranslationFieldsValid;
|
|
HPT_U16 NumberOfCurrentCylinders;
|
|
HPT_U16 NumberOfCurrentHeads;
|
|
HPT_U16 CurrentSectorsPerTrack;
|
|
HPT_U32 CurrentSectorCapacity;
|
|
HPT_U16 CurrentMultiSectorSetting;
|
|
HPT_U32 UserAddressableSectors;
|
|
HPT_U8 SingleWordDMASupport;
|
|
HPT_U8 SingleWordDMAActive;
|
|
HPT_U8 MultiWordDMASupport;
|
|
HPT_U8 MultiWordDMAActive;
|
|
HPT_U8 AdvancedPIOModes;
|
|
HPT_U8 Reserved4;
|
|
HPT_U16 MinimumMWXferCycleTime;
|
|
HPT_U16 RecommendedMWXferCycleTime;
|
|
HPT_U16 MinimumPIOCycleTime;
|
|
HPT_U16 MinimumPIOCycleTimeIORDY;
|
|
HPT_U16 Reserved5[2];
|
|
HPT_U16 ReleaseTimeOverlapped;
|
|
HPT_U16 ReleaseTimeServiceCommand;
|
|
HPT_U16 MajorRevision;
|
|
HPT_U16 MinorRevision;
|
|
} IDENTIFY_DATA2, *PIDENTIFY_DATA2;
|
|
#endif
|
|
|
|
/*
|
|
* physical device information.
|
|
* IdentifyData.ModelNumber[] is HPT_U8-swapped from the original identify data.
|
|
*/
|
|
typedef struct _DEVICE_INFO {
|
|
HPT_U8 ControllerId; /* controller id */
|
|
HPT_U8 PathId; /* bus */
|
|
HPT_U8 TargetId; /* id */
|
|
HPT_U8 DeviceModeSetting; /* Current Data Transfer mode: 0-4 PIO 0-4 */
|
|
/* 5-7 MW DMA0-2, 8-13 UDMA0-5 */
|
|
HPT_U8 DeviceType; /* device type */
|
|
HPT_U8 UsableMode; /* highest usable mode */
|
|
|
|
#ifdef __BIG_ENDIAN_BITFIELD
|
|
HPT_U8 NCQEnabled: 1;
|
|
HPT_U8 NCQSupported: 1;
|
|
HPT_U8 TCQEnabled: 1;
|
|
HPT_U8 TCQSupported: 1;
|
|
HPT_U8 WriteCacheEnabled: 1;
|
|
HPT_U8 WriteCacheSupported: 1;
|
|
HPT_U8 ReadAheadEnabled: 1;
|
|
HPT_U8 ReadAheadSupported: 1;
|
|
HPT_U8 reserved6: 6;
|
|
HPT_U8 SpinUpMode: 2;
|
|
#else
|
|
HPT_U8 ReadAheadSupported: 1;
|
|
HPT_U8 ReadAheadEnabled: 1;
|
|
HPT_U8 WriteCacheSupported: 1;
|
|
HPT_U8 WriteCacheEnabled: 1;
|
|
HPT_U8 TCQSupported: 1;
|
|
HPT_U8 TCQEnabled: 1;
|
|
HPT_U8 NCQSupported: 1;
|
|
HPT_U8 NCQEnabled: 1;
|
|
HPT_U8 SpinUpMode: 2;
|
|
HPT_U8 reserved6: 6;
|
|
#endif
|
|
|
|
HPT_U32 Flags; /* working flags, see DEVICE_FLAG_XXX */
|
|
|
|
IDENTIFY_DATA2 IdentifyData; /* Identify Data of this device */
|
|
|
|
}
|
|
__attribute__((packed)) DEVICE_INFO, *PDEVICE_INFO;
|
|
|
|
#if HPT_INTERFACE_VERSION>=0x01020000
|
|
#define MAX_PARENTS_PER_DISK 8
|
|
/*
|
|
* physical device information.
|
|
* IdentifyData.ModelNumber[] is HPT_U8-swapped from the original identify data.
|
|
*/
|
|
typedef struct _DEVICE_INFO_V2 {
|
|
HPT_U8 ControllerId; /* controller id */
|
|
HPT_U8 PathId; /* bus */
|
|
HPT_U8 TargetId; /* id */
|
|
HPT_U8 DeviceModeSetting; /* Current Data Transfer mode: 0-4 PIO 0-4 */
|
|
/* 5-7 MW DMA0-2, 8-13 UDMA0-5 */
|
|
HPT_U8 DeviceType; /* device type */
|
|
HPT_U8 UsableMode; /* highest usable mode */
|
|
|
|
#ifdef __BIG_ENDIAN_BITFIELD
|
|
HPT_U8 NCQEnabled: 1;
|
|
HPT_U8 NCQSupported: 1;
|
|
HPT_U8 TCQEnabled: 1;
|
|
HPT_U8 TCQSupported: 1;
|
|
HPT_U8 WriteCacheEnabled: 1;
|
|
HPT_U8 WriteCacheSupported: 1;
|
|
HPT_U8 ReadAheadEnabled: 1;
|
|
HPT_U8 ReadAheadSupported: 1;
|
|
HPT_U8 reserved6: 6;
|
|
HPT_U8 SpinUpMode: 2;
|
|
#else
|
|
HPT_U8 ReadAheadSupported: 1;
|
|
HPT_U8 ReadAheadEnabled: 1;
|
|
HPT_U8 WriteCacheSupported: 1;
|
|
HPT_U8 WriteCacheEnabled: 1;
|
|
HPT_U8 TCQSupported: 1;
|
|
HPT_U8 TCQEnabled: 1;
|
|
HPT_U8 NCQSupported: 1;
|
|
HPT_U8 NCQEnabled: 1;
|
|
HPT_U8 SpinUpMode: 2;
|
|
HPT_U8 reserved6: 6;
|
|
#endif
|
|
|
|
HPT_U32 Flags; /* working flags, see DEVICE_FLAG_XXX */
|
|
|
|
IDENTIFY_DATA2 IdentifyData; /* Identify Data of this device */
|
|
|
|
HPT_U64 TotalFree;
|
|
HPT_U64 MaxFree;
|
|
HPT_U64 BadSectors;
|
|
DEVICEID ParentArrays[MAX_PARENTS_PER_DISK];
|
|
|
|
}
|
|
__attribute__((packed)) DEVICE_INFO_V2, *PDEVICE_INFO_V2;
|
|
|
|
/*
|
|
* HPT601 information
|
|
*/
|
|
#endif
|
|
/*
|
|
* HPT601 information
|
|
*/
|
|
#define HPT601_INFO_DEVICEID 1
|
|
#define HPT601_INFO_TEMPERATURE 2
|
|
#define HPT601_INFO_FANSTATUS 4
|
|
#define HPT601_INFO_BEEPERCONTROL 8
|
|
#define HPT601_INFO_LED1CONTROL 0x10
|
|
#define HPT601_INFO_LED2CONTROL 0x20
|
|
#define HPT601_INFO_POWERSTATUS 0x40
|
|
|
|
typedef struct _HPT601_INFO_ {
|
|
HPT_U16 ValidFields; /* mark valid fields below */
|
|
HPT_U16 DeviceId; /* 0x5A3E */
|
|
HPT_U16 Temperature; /* Read: temperature sensor value. Write: temperature limit */
|
|
HPT_U16 FanStatus; /* Fan status */
|
|
HPT_U16 BeeperControl; /* bit4: beeper control bit. bit0-3: frequency bits */
|
|
HPT_U16 LED1Control; /* bit4: twinkling control bit. bit0-3: frequency bits */
|
|
HPT_U16 LED2Control; /* bit4: twinkling control bit. bit0-3: frequency bits */
|
|
HPT_U16 PowerStatus; /* 1: has power 2: no power */
|
|
} HPT601_INFO, *PHPT601_INFO;
|
|
|
|
#if HPT_INTERFACE_VERSION>=0x01010000
|
|
#ifndef __KERNEL__
|
|
/* cache policy for each vdev, copied from ldm.h */
|
|
#define CACHE_POLICY_NONE 0
|
|
#define CACHE_POLICY_WRITE_THROUGH 1
|
|
#define CACHE_POLICY_WRITE_BACK 2
|
|
|
|
#endif
|
|
#endif
|
|
/*
|
|
* Logical device information.
|
|
* Union of ArrayInfo and DeviceInfo.
|
|
* Common properties will be put in logical device information.
|
|
*/
|
|
typedef struct _LOGICAL_DEVICE_INFO {
|
|
HPT_U8 Type; /* LDT_ARRAY or LDT_DEVICE */
|
|
HPT_U8 reserved[3];
|
|
|
|
HPT_U32 Capacity; /* array capacity */
|
|
DEVICEID ParentArray;
|
|
|
|
union {
|
|
HPT_ARRAY_INFO array;
|
|
DEVICE_INFO device;
|
|
} __attribute__((packed)) u;
|
|
|
|
} __attribute__((packed)) LOGICAL_DEVICE_INFO, *PLOGICAL_DEVICE_INFO;
|
|
|
|
#if HPT_INTERFACE_VERSION>=0x01010000
|
|
typedef struct _LOGICAL_DEVICE_INFO_V2 {
|
|
HPT_U8 Type; /* LDT_ARRAY or LDT_DEVICE */
|
|
HPT_U8 reserved[3];
|
|
|
|
HPT_U64 Capacity; /* array capacity */
|
|
DEVICEID ParentArray; /*for physical device, Please don't use this field.
|
|
* use ParentArrays field in DEVICE_INFO_V2
|
|
*/
|
|
|
|
union {
|
|
HPT_ARRAY_INFO_V2 array;
|
|
DEVICE_INFO device;
|
|
} __attribute__((packed)) u;
|
|
|
|
} __attribute__((packed)) LOGICAL_DEVICE_INFO_V2, *PLOGICAL_DEVICE_INFO_V2;
|
|
#endif
|
|
|
|
#if HPT_INTERFACE_VERSION>=0x01020000
|
|
#define INVALID_TARGET_ID 0xFF
|
|
#define INVALID_BUS_ID 0xFF
|
|
typedef struct _LOGICAL_DEVICE_INFO_V3 {
|
|
HPT_U8 Type; /* LDT_ARRAY or LDT_DEVICE */
|
|
HPT_U8 CachePolicy; /* refer to CACHE_POLICY_xxx */
|
|
HPT_U8 VBusId; /* vbus sequence in vbus_list*/
|
|
HPT_U8 TargetId; /* 0xFF is invalid target/bus id. otherwise, GUI should show
|
|
* to user:
|
|
* os name: HPT DISK x_y
|
|
* where x is vbus_id and y is target_id.
|
|
*/
|
|
|
|
HPT_U64 Capacity; /* array capacity */
|
|
DEVICEID ParentArray; /*for physical device, Please don't use this field.
|
|
* use ParentArrays field in DEVICE_INFO_V2
|
|
*/
|
|
HPT_U32 TotalIOs;
|
|
HPT_U32 TobalMBs;
|
|
HPT_U32 IOPerSec;
|
|
HPT_U32 MBPerSec;
|
|
|
|
union {
|
|
HPT_ARRAY_INFO_V3 array;
|
|
DEVICE_INFO_V2 device;
|
|
} __attribute__((packed)) u;
|
|
|
|
}
|
|
__attribute__((packed)) LOGICAL_DEVICE_INFO_V3, *PLOGICAL_DEVICE_INFO_V3;
|
|
#endif
|
|
|
|
|
|
/*
|
|
* ALTERABLE_ARRAY_INFO and ALTERABLE_DEVICE_INFO, used in set_array_info()
|
|
* and set_device_info().
|
|
* When set_xxx_info() is called, the ValidFields member indicates which
|
|
* fields in the structure are valid.
|
|
*/
|
|
/* field masks */
|
|
#define AAIF_NAME 1
|
|
#define AAIF_DESCRIPTION 2
|
|
|
|
#define ADIF_MODE 1
|
|
#define ADIF_TCQ 2
|
|
#define ADIF_NCQ 4
|
|
#define ADIF_WRITE_CACHE 8
|
|
#define ADIF_READ_AHEAD 0x10
|
|
#define ADIF_SPIN_UP_MODE 0x20
|
|
|
|
typedef struct _ALTERABLE_ARRAY_INFO {
|
|
HPT_U32 ValidFields; /* mark valid fields below */
|
|
HPT_U8 Name[MAX_ARRAYNAME_LEN]; /* array name */
|
|
HPT_U8 Description[64]; /* array description */
|
|
}
|
|
ALTERABLE_ARRAY_INFO, *PALTERABLE_ARRAY_INFO;
|
|
|
|
typedef struct _ALTERABLE_DEVICE_INFO {
|
|
HPT_U32 ValidFields; /* mark valid fields below */
|
|
HPT_U8 DeviceModeSetting; /* 0-4 PIO 0-4, 5-7 MW DMA0-2, 8-13 UDMA0-5 */
|
|
}
|
|
ALTERABLE_DEVICE_INFO, *PALTERABLE_DEVICE_INFO;
|
|
|
|
typedef struct _ALTERABLE_DEVICE_INFO_V2 {
|
|
HPT_U32 ValidFields; /* mark valid fields below */
|
|
HPT_U8 DeviceModeSetting; /* 0-4 PIO 0-4, 5-7 MW DMA0-2, 8-13 UDMA0-5 */
|
|
HPT_U8 TCQEnabled;
|
|
HPT_U8 NCQEnabled;
|
|
HPT_U8 WriteCacheEnabled;
|
|
HPT_U8 ReadAheadEnabled;
|
|
HPT_U8 SpinUpMode;
|
|
HPT_U8 reserve[2];
|
|
HPT_U32 reserve2[13]; /* pad to 64 bytes */
|
|
}
|
|
ALTERABLE_DEVICE_INFO_V2, *PALTERABLE_DEVICE_INFO_V2;
|
|
|
|
#if HPT_INTERFACE_VERSION>=0x01020000
|
|
/* target type of set_info, this time, we use the type and length alterable param to implement
|
|
* set_dev_info function for future extension*/
|
|
#define TARGET_TYPE_DEVICE 0
|
|
#define TARGET_TYPE_ARRAY 1
|
|
|
|
/*which type of information of an array to be changed*/
|
|
#define AIT_NAME 0
|
|
#define AIT_DESCRIPTION 1
|
|
#define AIT_CACHE_POLICY 2
|
|
/*which type of information of a device to be changed*/
|
|
#define DIT_MODE 0
|
|
#define DIT_READ_AHEAD 1
|
|
#define DIT_WRITE_CACHE 2
|
|
#define DIT_TCQ 3
|
|
#define DIT_NCQ 4
|
|
|
|
/*param type is determined by target_type and info_type*/
|
|
typedef struct _SET_DEV_INFO
|
|
{
|
|
HPT_U8 target_type;
|
|
HPT_U8 infor_type;
|
|
HPT_U16 param_length;
|
|
#define SET_VDEV_INFO_param(p) ((HPT_U8 *)(p)+sizeof(SET_VDEV_INFO))
|
|
/* HPT_U8 param[0]; */
|
|
} SET_VDEV_INFO, * PSET_VDEV_INFO;
|
|
|
|
typedef HPT_U8 PARAM_ARRAY_NAME[MAX_ARRAYNAME_LEN] ;
|
|
typedef HPT_U8 PARAM_ARRAY_DES[64];
|
|
typedef HPT_U8 PARAM_DEVICE_MODE, PARAM_TCQ, PARAM_NCQ, PARAM_READ_AHEAD, PARAM_WRITE_CACHE, PARAM_CACHE_POLICY;
|
|
|
|
#endif
|
|
|
|
/*
|
|
* CREATE_ARRAY_PARAMS
|
|
* Param structure used to create an array.
|
|
*/
|
|
typedef struct _CREATE_ARRAY_PARAMS {
|
|
HPT_U8 ArrayType; /* 1-level array type */
|
|
HPT_U8 nDisk; /* number of elements in Members[] array */
|
|
HPT_U8 BlockSizeShift; /* Stripe size if ArrayType==AT_RAID0 / AT_RAID5 */
|
|
HPT_U8 CreateFlags; /* See CAF_xxx */
|
|
|
|
HPT_U8 ArrayName[MAX_ARRAYNAME_LEN]; /* Array name */
|
|
HPT_U8 Description[64]; /* array description */
|
|
HPT_U8 CreateManager[16]; /* who created it */
|
|
TIME_RECORD CreateTime; /* when created it */
|
|
|
|
HPT_U32 Members[MAX_ARRAY_MEMBERS_V1];/* ID of array members, a member can be an array */
|
|
|
|
} CREATE_ARRAY_PARAMS, *PCREATE_ARRAY_PARAMS;
|
|
|
|
#if HPT_INTERFACE_VERSION>=0x01010000
|
|
typedef struct _CREATE_ARRAY_PARAMS_V2 {
|
|
HPT_U8 ArrayType; /* 1-level array type */
|
|
HPT_U8 nDisk; /* number of elements in Members[] array */
|
|
HPT_U8 BlockSizeShift; /* Stripe size if ArrayType==AT_RAID0 / AT_RAID5 */
|
|
HPT_U8 CreateFlags; /* See CAF_xxx */
|
|
|
|
HPT_U8 ArrayName[MAX_ARRAYNAME_LEN]; /* Array name */
|
|
HPT_U8 Description[64]; /* array description */
|
|
HPT_U8 CreateManager[16]; /* who created it */
|
|
TIME_RECORD CreateTime; /* when created it */
|
|
HPT_U64 Capacity;
|
|
|
|
HPT_U32 Members[MAX_ARRAY_MEMBERS_V2];/* ID of array members, a member can be an array */
|
|
|
|
} CREATE_ARRAY_PARAMS_V2, *PCREATE_ARRAY_PARAMS_V2;
|
|
#endif
|
|
|
|
#if HPT_INTERFACE_VERSION < 0x01020000
|
|
/*
|
|
* Flags used for creating an RAID 1 array
|
|
*
|
|
* CAF_CREATE_AND_DUPLICATE
|
|
* Copy source disk contents to target for RAID 1. If user choose "create and duplicate"
|
|
* to create an array, GUI will call CreateArray() with this flag set. Then GUI should
|
|
* call hpt_get_device_info() with the returned array ID and check returned flags to
|
|
* see if ARRAY_FLAG_REBUILDING is set. If not set, driver does not support rebuilding
|
|
* and GUI must do duplication itself.
|
|
* CAF_DUPLICATE_MUST_DONE
|
|
* If the duplication is aborted or fails, do not create the array.
|
|
*/
|
|
#define CAF_CREATE_AND_DUPLICATE 1
|
|
#define CAF_DUPLICATE_MUST_DONE 2
|
|
#define CAF_CREATE_AS_RAID15 4
|
|
/*
|
|
* Flags used for creating an RAID 5 array
|
|
*/
|
|
#define CAF_CREATE_R5_NO_BUILD 1
|
|
#define CAF_CREATE_R5_ZERO_INIT 2
|
|
#define CAF_CREATE_R5_BUILD_PARITY 4
|
|
|
|
#else
|
|
/*
|
|
* Flags used for creating
|
|
*/
|
|
#define CAF_FOREGROUND_INITIALIZE 1
|
|
#define CAF_BACKGROUND_INITIALIZE 2
|
|
#define CAF_CREATE_R5_WRITE_BACK 8
|
|
|
|
#endif
|
|
|
|
#define CAF_KEEP_DATA_ALWAYS 0x80
|
|
|
|
/* Flags used for deleting an array
|
|
*
|
|
* DAF_KEEP_DATA_IF_POSSIBLE
|
|
* If this flag is set, deleting a RAID 1 array will not destroy the data on both disks.
|
|
* Deleting a JBOD should keep partitions on first disk ( not implement now ).
|
|
* Deleting a RAID 0/1 should result as two RAID 0 array ( not implement now ).
|
|
*/
|
|
#define DAF_KEEP_DATA_IF_POSSIBLE 1
|
|
#define DAF_KEEP_DATA_ALWAYS 2
|
|
|
|
/*
|
|
* event types
|
|
*/
|
|
#define ET_DEVICE_REMOVED 1 /* device removed */
|
|
#define ET_DEVICE_PLUGGED 2 /* device plugged */
|
|
#define ET_DEVICE_ERROR 3 /* device I/O error */
|
|
#define ET_REBUILD_STARTED 4
|
|
#define ET_REBUILD_ABORTED 5
|
|
#define ET_REBUILD_FINISHED 6
|
|
#define ET_SPARE_TOOK_OVER 7
|
|
#define ET_REBUILD_FAILED 8
|
|
#define ET_VERIFY_STARTED 9
|
|
#define ET_VERIFY_ABORTED 10
|
|
#define ET_VERIFY_FAILED 11
|
|
#define ET_VERIFY_FINISHED 12
|
|
#define ET_INITIALIZE_STARTED 13
|
|
#define ET_INITIALIZE_ABORTED 14
|
|
#define ET_INITIALIZE_FAILED 15
|
|
#define ET_INITIALIZE_FINISHED 16
|
|
#define ET_VERIFY_DATA_ERROR 17
|
|
#define ET_TRANSFORM_STARTED 18
|
|
#define ET_TRANSFORM_ABORTED 19
|
|
#define ET_TRANSFORM_FAILED 20
|
|
#define ET_TRANSFORM_FINISHED 21
|
|
#define ET_SMART_FAILED 22
|
|
#define ET_SMART_PASSED 23
|
|
/*
|
|
* event structure
|
|
*/
|
|
typedef struct _HPT_EVENT {
|
|
TIME_RECORD Time;
|
|
DEVICEID DeviceID;
|
|
HPT_U8 EventType;
|
|
HPT_U8 reserved[3];
|
|
|
|
HPT_U8 Data[32]; /* various data depend on EventType */
|
|
} HPT_EVENT, *PHPT_EVENT;
|
|
|
|
/*
|
|
* IDE pass-through command. Use it at your own risk!
|
|
*/
|
|
#ifdef _MSC_VER
|
|
#pragma warning(disable:4200)
|
|
#endif
|
|
typedef struct _IDE_PASS_THROUGH_HEADER {
|
|
DEVICEID idDisk; /* disk ID */
|
|
HPT_U8 bFeaturesReg; /* feature register */
|
|
HPT_U8 bSectorCountReg; /* IDE sector count register. */
|
|
HPT_U8 bLbaLowReg; /* IDE LBA low value. */
|
|
HPT_U8 bLbaMidReg; /* IDE LBA mid register. */
|
|
HPT_U8 bLbaHighReg; /* IDE LBA high value. */
|
|
HPT_U8 bDriveHeadReg; /* IDE drive/head register. */
|
|
HPT_U8 bCommandReg; /* Actual IDE command. Checked for validity by driver. */
|
|
HPT_U8 nSectors; /* data size in sectors, if the command has data transfer */
|
|
HPT_U8 protocol; /* IO_COMMAND_(READ,WRITE) or zero for non-DATA */
|
|
HPT_U8 reserve[3];
|
|
#define IDE_PASS_THROUGH_buffer(p) ((HPT_U8 *)(p) + sizeof(IDE_PASS_THROUGH_HEADER))
|
|
/* HPT_U8 DataBuffer[0]; */
|
|
}
|
|
IDE_PASS_THROUGH_HEADER, *PIDE_PASS_THROUGH_HEADER;
|
|
|
|
/*
|
|
* device io packet format
|
|
*/
|
|
typedef struct _DEVICE_IO_EX_PARAMS {
|
|
DEVICEID idDisk;
|
|
HPT_U32 Lba;
|
|
HPT_U16 nSectors;
|
|
HPT_U8 Command; /* IO_COMMAD_xxx */
|
|
HPT_U8 BufferType; /* BUFFER_TYPE_xxx, see below */
|
|
HPT_U32 BufferPtr;
|
|
}
|
|
DEVICE_IO_EX_PARAMS, *PDEVICE_IO_EX_PARAMS;
|
|
|
|
#define BUFFER_TYPE_LOGICAL 1 /* logical pointer to buffer */
|
|
#define BUFFER_TYPE_PHYSICAL 2 /* physical address of buffer */
|
|
#define BUFFER_TYPE_LOGICAL_LOGICAL_SG 3 /* logical pointer to logical S/G table */
|
|
#define BUFFER_TYPE_LOGICAL_PHYSICAL_SG 4 /* logical pointer to physical S/G table */
|
|
#define BUFFER_TYPE_PHYSICAL_LOGICAL_SG 5 /* physical address to logical S/G table */
|
|
#define BUFFER_TYPE_PHYSICAL_PHYSICAL_SG 6 /* physical address of physical S/G table */
|
|
#define BUFFER_TYPE_PHYSICAL_PHYSICAL_SG_PIO 7 /* non DMA capable physical address of physical S/G table */
|
|
|
|
typedef struct _HPT_DRIVER_PARAMETER {
|
|
char name[32];
|
|
HPT_U8 value[32];
|
|
HPT_U8 type; /* HPT_DRIVER_PARAMETER_TYPE_* */
|
|
HPT_U8 reserve3[3];
|
|
HPT_U8 location; /* 0 - system */
|
|
HPT_U8 controller;
|
|
HPT_U8 bus;
|
|
HPT_U8 reserve1;
|
|
char desc[128];
|
|
}
|
|
HPT_DRIVER_PARAMETER, *PHPT_DRIVER_PARAMETER;
|
|
|
|
#define HPT_DRIVER_PARAMETER_TYPE_INT 1
|
|
#define HPT_DRIVER_PARAMETER_TYPE_BOOL 2
|
|
|
|
|
|
|
|
/*
|
|
* ioctl structure
|
|
*/
|
|
#define HPT_IOCTL_MAGIC32 0x1A2B3C4D
|
|
#define HPT_IOCTL_MAGIC 0xA1B2C3D4
|
|
|
|
typedef struct _HPT_IOCTL_PARAM {
|
|
HPT_U32 Magic; /* used to check if it's a valid ioctl packet */
|
|
HPT_U32 dwIoControlCode; /* operation control code */
|
|
HPT_PTR lpInBuffer; /* input data buffer */
|
|
HPT_U32 nInBufferSize; /* size of input data buffer */
|
|
HPT_PTR lpOutBuffer; /* output data buffer */
|
|
HPT_U32 nOutBufferSize; /* size of output data buffer */
|
|
HPT_PTR lpBytesReturned; /* count of HPT_U8s returned */
|
|
}
|
|
HPT_IOCTL_PARAM, *PHPT_IOCTL_PARAM;
|
|
|
|
/* for 32-bit app running on 64-bit system */
|
|
typedef struct _HPT_IOCTL_PARAM32 {
|
|
HPT_U32 Magic;
|
|
HPT_U32 dwIoControlCode;
|
|
HPT_U32 lpInBuffer;
|
|
HPT_U32 nInBufferSize;
|
|
HPT_U32 lpOutBuffer;
|
|
HPT_U32 nOutBufferSize;
|
|
HPT_U32 lpBytesReturned;
|
|
}
|
|
HPT_IOCTL_PARAM32, *PHPT_IOCTL_PARAM32;
|
|
|
|
/*
|
|
* User-mode ioctl parameter passing conventions:
|
|
* The ioctl function implementation is platform specific, so we don't
|
|
* have forced rules for it. However, it's suggested to use a parameter
|
|
* passing method as below
|
|
* 1) Put all input data continuously in an input buffer.
|
|
* 2) Prepare an output buffer with enough size if needed.
|
|
* 3) Fill a HPT_IOCTL_PARAM structure.
|
|
* 4) Pass the structure to driver through a platform-specific method.
|
|
* This is implemented in the mid-layer user-mode library. The UI
|
|
* programmer needn't care about it.
|
|
*/
|
|
|
|
/************************************************************************
|
|
* User mode functions
|
|
************************************************************************/
|
|
#if !defined(__KERNEL__) || defined(SIMULATE)
|
|
/*
|
|
* hpt_get_version
|
|
* Version compatibility: all versions
|
|
* Parameters:
|
|
* None
|
|
* Returns:
|
|
* interface version. 0 when fail.
|
|
*/
|
|
HPT_U32 hpt_get_version(void);
|
|
|
|
/*
|
|
* hpt_get_driver_capabilities
|
|
* Version compatibility: v1.0.0.2 or later
|
|
* Parameters:
|
|
* Pointer to receive a DRIVE_CAPABILITIES structure. The caller must set
|
|
* dwSize member to sizeof(DRIVER_CAPABILITIES). The callee must check this
|
|
* member to see if it's correct.
|
|
* Returns:
|
|
* 0 - Success
|
|
*/
|
|
int hpt_get_driver_capabilities(PDRIVER_CAPABILITIES cap);
|
|
|
|
/*
|
|
* hpt_get_controller_count
|
|
* Version compatibility: v1.0.0.1 or later
|
|
* Parameters:
|
|
* None
|
|
* Returns:
|
|
* number of controllers
|
|
*/
|
|
int hpt_get_controller_count(void);
|
|
|
|
/* hpt_get_controller_info
|
|
* Version compatibility: v1.0.0.1 or later
|
|
* Parameters:
|
|
* id Controller id
|
|
* pInfo pointer to CONTROLLER_INFO buffer
|
|
* Returns:
|
|
* 0 Success, controller info is put into (*pInfo ).
|
|
*/
|
|
int hpt_get_controller_info(int id, PCONTROLLER_INFO pInfo);
|
|
|
|
#if HPT_INTERFACE_VERSION>=0x01020000
|
|
/* hpt_get_controller_info_v2
|
|
* Version compatibility: v2.0.0.0 or later
|
|
* Parameters:
|
|
* id Controller id
|
|
* pInfo pointer to CONTROLLER_INFO_V2 buffer
|
|
* Returns:
|
|
* 0 Success, controller info is put into (*pInfo ).
|
|
*/
|
|
int hpt_get_controller_info_v2(int id, PCONTROLLER_INFO_V2 pInfo);
|
|
#endif
|
|
|
|
/* hpt_get_channel_info
|
|
* Version compatibility: v1.0.0.1 or later
|
|
* Parameters:
|
|
* id Controller id
|
|
* bus bus number
|
|
* pInfo pointer to CHANNEL_INFO buffer
|
|
* Returns:
|
|
* 0 Success, channel info is put into (*pInfo ).
|
|
*/
|
|
int hpt_get_channel_info(int id, int bus, PCHANNEL_INFO pInfo);
|
|
|
|
/* hpt_get_logical_devices
|
|
* Version compatibility: v1.0.0.1 or later
|
|
* Parameters:
|
|
* pIds pointer to a DEVICEID array
|
|
* nMaxCount array size
|
|
* Returns:
|
|
* Number of ID returned. All logical device IDs are put into pIds array.
|
|
* Note: A spare disk is not a logical device.
|
|
*/
|
|
int hpt_get_logical_devices(DEVICEID * pIds, int nMaxCount);
|
|
|
|
/* hpt_get_device_info
|
|
* Version compatibility: v1.0.0.1 or later
|
|
* Parameters:
|
|
* id logical device id
|
|
* pInfo pointer to LOGICAL_DEVICE_INFO structure
|
|
* Returns:
|
|
* 0 - Success
|
|
*/
|
|
int hpt_get_device_info(DEVICEID id, PLOGICAL_DEVICE_INFO pInfo);
|
|
|
|
/* hpt_create_array
|
|
* Version compatibility: v1.0.0.1 or later
|
|
* Parameters:
|
|
* pParam pointer to CREATE_ARRAY_PARAMS structure
|
|
* Returns:
|
|
* 0 failed
|
|
* else return array id
|
|
*/
|
|
DEVICEID hpt_create_array(PCREATE_ARRAY_PARAMS pParam);
|
|
|
|
/* hpt_delete_array
|
|
* Version compatibility: v1.0.0.1 or later
|
|
* Parameters:
|
|
* id array id
|
|
* Returns:
|
|
* 0 Success
|
|
*/
|
|
int hpt_delete_array(DEVICEID id, HPT_U32 options);
|
|
|
|
/* hpt_device_io
|
|
* Read/write data on array and physcal device.
|
|
* Version compatibility: v1.0.0.1 or later
|
|
* Parameters:
|
|
* id device id. If it's an array ID, IO will be performed on the array.
|
|
* If it's a physical device ID, IO will be performed on the device.
|
|
* cmd IO_COMMAND_READ or IO_COMMAND_WRITE
|
|
* buffer data buffer
|
|
* length data size
|
|
* Returns:
|
|
* 0 Success
|
|
*/
|
|
int hpt_device_io(DEVICEID id, int cmd, HPT_U32 lba, HPT_U32 nSector, void * buffer);
|
|
|
|
/* hpt_add_disk_to_array
|
|
* Used to dynamicly add a disk to an RAID1, RAID0/1, RAID1/0 or RAID5 array.
|
|
* Auto-rebuild will start.
|
|
* Version compatibility: v1.0.0.1 or later
|
|
* Parameters:
|
|
* idArray array id
|
|
* idDisk disk id
|
|
* Returns:
|
|
* 0 Success
|
|
*/
|
|
int hpt_add_disk_to_array(DEVICEID idArray, DEVICEID idDisk);
|
|
|
|
/* hpt_add_spare_disk
|
|
* Version compatibility: v1.0.0.1 or later
|
|
* Add a disk to spare pool.
|
|
* Parameters:
|
|
* idDisk disk id
|
|
* Returns:
|
|
* 0 Success
|
|
*/
|
|
int hpt_add_spare_disk(DEVICEID idDisk);
|
|
|
|
/* hpt_add_dedicated_spare
|
|
* Version compatibility: v1.0.0.3 or later
|
|
* Add a spare disk to an array
|
|
* Parameters:
|
|
* idDisk disk id
|
|
* idArray array id
|
|
* Returns:
|
|
* 0 Success
|
|
*/
|
|
int hpt_add_dedicated_spare(DEVICEID idDisk, DEVICEID idArray);
|
|
|
|
/* hpt_remove_spare_disk
|
|
* remove a disk from spare pool.
|
|
* Version compatibility: v1.0.0.1 or later
|
|
* Parameters:
|
|
* idDisk disk id
|
|
* Returns:
|
|
* 0 Success
|
|
*/
|
|
int hpt_remove_spare_disk(DEVICEID idDisk);
|
|
|
|
/* hpt_get_event
|
|
* Used to poll events from driver.
|
|
* Version compatibility: v1.0.0.1 or later
|
|
* Parameters:
|
|
* pEvent pointer to HPT_EVENT structure
|
|
* Returns:
|
|
* 0 Success, event info is filled in *pEvent
|
|
*/
|
|
int hpt_get_event(PHPT_EVENT pEvent);
|
|
|
|
/* hpt_rebuild_data_block
|
|
* Used to copy data from source disk and mirror disk.
|
|
* Version compatibility: v1.0.0.1 or later
|
|
* Parameters:
|
|
* idArray Array ID (RAID1, 0/1 or RAID5)
|
|
* Lba Start LBA for each array member
|
|
* nSector Number of sectors for each array member (RAID 5 will ignore this parameter)
|
|
*
|
|
* Returns:
|
|
* 0 Success, event info is filled in *pEvent
|
|
*/
|
|
int hpt_rebuild_data_block(DEVICEID idMirror, HPT_U32 Lba, HPT_U8 nSector);
|
|
#define hpt_rebuild_mirror(p1, p2, p3) hpt_rebuild_data_block(p1, p2, p3)
|
|
|
|
/* hpt_set_array_state
|
|
* set array state.
|
|
* Version compatibility: v1.0.0.1 or later
|
|
* Parameters:
|
|
* idArray Array ID
|
|
* state See above 'array states' constants, possible values are:
|
|
* MIRROR_REBUILD_START
|
|
* Indicate that GUI wants to rebuild a mirror array
|
|
* MIRROR_REBUILD_ABORT
|
|
* GUI wants to abort rebuilding an array
|
|
* MIRROR_REBUILD_COMPLETE
|
|
* GUI finished to rebuild an array. If rebuild is done by driver this
|
|
* state has no use
|
|
*
|
|
* Returns:
|
|
* 0 Success
|
|
*/
|
|
int hpt_set_array_state(DEVICEID idArray, HPT_U32 state);
|
|
|
|
/* hpt_set_array_info
|
|
* set array info.
|
|
* Version compatibility: v1.0.0.1 or later
|
|
* Parameters:
|
|
* idArray Array ID
|
|
* pInfo pointer to new info
|
|
*
|
|
* Returns:
|
|
* 0 Success
|
|
*/
|
|
int hpt_set_array_info(DEVICEID idArray, PALTERABLE_ARRAY_INFO pInfo);
|
|
|
|
/* hpt_set_device_info
|
|
* set device info.
|
|
* Version compatibility: v1.0.0.1 or later
|
|
* Parameters:
|
|
* idDisk device ID
|
|
* pInfo pointer to new info
|
|
*
|
|
* Returns:
|
|
* 0 Success
|
|
* Additional notes:
|
|
* If idDisk==0, call to this function will stop buzzer on the adapter
|
|
* (if supported by driver).
|
|
*/
|
|
int hpt_set_device_info(DEVICEID idDisk, PALTERABLE_DEVICE_INFO pInfo);
|
|
|
|
#if HPT_INTERFACE_VERSION >= 0x01000004
|
|
int hpt_set_device_info_v2(DEVICEID idDisk, PALTERABLE_DEVICE_INFO_V2 pInfo);
|
|
#endif
|
|
|
|
/* hpt_rescan_devices
|
|
* rescan devices
|
|
* Version compatibility: v1.0.0.1 or later
|
|
* Parameters:
|
|
* None
|
|
* Returns:
|
|
* 0 Success
|
|
*/
|
|
int hpt_rescan_devices(void);
|
|
|
|
/* hpt_get_601_info
|
|
* Get HPT601 status
|
|
* Version compatibiilty: v1.0.0.3 or later
|
|
* Parameters:
|
|
* idDisk - Disk handle
|
|
* PHPT601_INFO - pointer to HPT601 info buffer
|
|
* Returns:
|
|
* 0 Success
|
|
*/
|
|
int hpt_get_601_info(DEVICEID idDisk, PHPT601_INFO pInfo);
|
|
|
|
/* hpt_set_601_info
|
|
* HPT601 function control
|
|
* Version compatibiilty: v1.0.0.3 or later
|
|
* Parameters:
|
|
* idDisk - Disk handle
|
|
* PHPT601_INFO - pointer to HPT601 info buffer
|
|
* Returns:
|
|
* 0 Success
|
|
*/
|
|
int hpt_set_601_info(DEVICEID idDisk, PHPT601_INFO pInfo);
|
|
|
|
/* hpt_lock_device
|
|
* Lock a block on a device (prevent OS accessing it)
|
|
* Version compatibiilty: v1.0.0.3 or later
|
|
* Parameters:
|
|
* idDisk - Disk handle
|
|
* Lba - Start LBA
|
|
* nSectors - number of sectors
|
|
* Returns:
|
|
* 0 Success
|
|
*/
|
|
int hpt_lock_device(DEVICEID idDisk, HPT_U32 Lba, HPT_U8 nSectors);
|
|
|
|
/* hpt_lock_device
|
|
* Unlock a device
|
|
* Version compatibiilty: v1.0.0.3 or later
|
|
* Parameters:
|
|
* idDisk - Disk handle
|
|
* Returns:
|
|
* 0 Success
|
|
*/
|
|
int hpt_unlock_device(DEVICEID idDisk);
|
|
|
|
/* hpt_ide_pass_through
|
|
* directly access controller's command and control registers.
|
|
* Can only call it on physical devices.
|
|
* Version compatibility: v1.0.0.3 or later
|
|
* Parameters:
|
|
* p - IDE_PASS_THROUGH header pointer
|
|
* Returns:
|
|
* 0 Success
|
|
*/
|
|
int hpt_ide_pass_through(PIDE_PASS_THROUGH_HEADER p);
|
|
|
|
/* hpt_verify_data_block
|
|
* verify data block on RAID1 or RAID5.
|
|
* Version compatibility: v1.0.0.3 or later
|
|
* Parameters:
|
|
* idArray - Array ID
|
|
* Lba - block number (on each array member, not logical block!)
|
|
* nSectors - Sectors for each member (RAID 5 will ignore this parameter)
|
|
* Returns:
|
|
* 0 Success
|
|
* 1 Data compare error
|
|
* 2 I/O error
|
|
*/
|
|
int hpt_verify_data_block(DEVICEID idArray, HPT_U32 Lba, HPT_U8 nSectors);
|
|
|
|
/* hpt_initialize_data_block
|
|
* initialize data block (fill with zero) on RAID5
|
|
* Version compatibility: v1.0.0.3 or later
|
|
* Parameters:
|
|
* idArray - Array ID
|
|
* Lba - block number (on each array member, not logical block!)
|
|
* nSectors - Sectors for each member (RAID 5 will ignore this parameter)
|
|
* Returns:
|
|
* 0 Success
|
|
*/
|
|
int hpt_initialize_data_block(DEVICEID idArray, HPT_U32 Lba, HPT_U8 nSectors);
|
|
|
|
/* hpt_device_io_ex
|
|
* extended device I/O function
|
|
* Version compatibility: v1.0.0.3 or later
|
|
* Parameters:
|
|
* idArray - Array ID
|
|
* Lba - block number (on each array member, not logical block!)
|
|
* nSectors - Sectors for each member
|
|
* buffer - I/O buffer or s/g address
|
|
* Returns:
|
|
* 0 Success
|
|
*/
|
|
int hpt_device_io_ex(PDEVICE_IO_EX_PARAMS param);
|
|
|
|
/* hpt_set_boot_mark
|
|
* select boot device
|
|
* Version compatibility: v1.0.0.3 or later
|
|
* Parameters:
|
|
* id - logical device ID. If id is 0 the boot mark will be removed.
|
|
* Returns:
|
|
* 0 Success
|
|
*/
|
|
int hpt_set_boot_mark(DEVICEID id);
|
|
|
|
/* hpt_query_remove
|
|
* check if device can be removed safely
|
|
* Version compatibility: v1.0.0.4 or later
|
|
* Parameters:
|
|
* ndev - number of devices
|
|
* pIds - device ID list
|
|
* Returns:
|
|
* 0 - Success
|
|
* -1 - unknown error
|
|
* n - the n-th device that can't be removed
|
|
*/
|
|
int hpt_query_remove(HPT_U32 ndev, DEVICEID *pIds);
|
|
|
|
/* hpt_remove_devices
|
|
* remove a list of devices
|
|
* Version compatibility: v1.0.0.4 or later
|
|
* Parameters:
|
|
* ndev - number of devices
|
|
* pIds - device ID list
|
|
* Returns:
|
|
* 0 - Success
|
|
* -1 - unknown error
|
|
* n - the n-th device that can't be removed
|
|
*/
|
|
int hpt_remove_devices(HPT_U32 ndev, DEVICEID *pIds);
|
|
|
|
/* hpt_create_array_v2
|
|
* Version compatibility: v1.1.0.0 or later
|
|
* Parameters:
|
|
* pParam pointer to CREATE_ARRAY_PARAMS_V2 structure
|
|
* Returns:
|
|
* 0 failed
|
|
* else return array id
|
|
*/
|
|
#if HPT_INTERFACE_VERSION>=0x01010000
|
|
DEVICEID hpt_create_array_v2(PCREATE_ARRAY_PARAMS_V2 pParam);
|
|
#endif
|
|
|
|
/* hpt_get_device_info_v2
|
|
* Version compatibility: v1.1.0.0 or later
|
|
* Parameters:
|
|
* id logical device id
|
|
* pInfo pointer to LOGICAL_DEVICE_INFO_V2 structure
|
|
* Returns:
|
|
* 0 - Success
|
|
*/
|
|
#if HPT_INTERFACE_VERSION>=0x01010000
|
|
int hpt_get_device_info_v2(DEVICEID id, PLOGICAL_DEVICE_INFO_V2 pInfo);
|
|
#endif
|
|
|
|
/* hpt_get_device_info_v3
|
|
* Version compatibility: v1.2.0.0 or later
|
|
* Parameters:
|
|
* id logical device id
|
|
* pInfo pointer to LOGICAL_DEVICE_INFO_V2 structure
|
|
* Returns:
|
|
* 0 - Success
|
|
*/
|
|
#if HPT_INTERFACE_VERSION>=0x01020000
|
|
int hpt_get_device_info_v3(DEVICEID id, PLOGICAL_DEVICE_INFO_V3 pInfo);
|
|
#endif
|
|
|
|
/* hpt_create_transform
|
|
* create a transform instance.
|
|
* Version compatibility: v2.0.0.0 or later
|
|
* Parameters:
|
|
* idArray - source array
|
|
* destInfo - destination array info
|
|
* Returns:
|
|
* destination array id
|
|
*/
|
|
#if HPT_INTERFACE_VERSION>=0x02000000
|
|
DEVICEID hpt_create_transform(DEVICEID idArray, PCREATE_ARRAY_PARAMS_V2 destInfo);
|
|
#endif
|
|
|
|
/* hpt_step_transform
|
|
* move a block in a tranform progress.
|
|
* This function is called by mid-layer, not GUI (which uses set_array_state instead).
|
|
* Version compatibility: v2.0.0.0 or later
|
|
* Parameters:
|
|
* idArray - destination array ID
|
|
* the source ID will be invalid when transform complete.
|
|
* Returns:
|
|
* 0 - Success
|
|
*/
|
|
#if HPT_INTERFACE_VERSION>=0x02000000
|
|
int hpt_step_transform(DEVICEID idArray);
|
|
#endif
|
|
|
|
/* hpt_set_vdev_info
|
|
* set information for disk or array
|
|
* Version compatibility: v1.2.0.0 or later
|
|
* Parameters:
|
|
* dev - destination device
|
|
*
|
|
* Returns:
|
|
* 0 - Success
|
|
*/
|
|
#if HPT_INTERFACE_VERSION>=0x01020000
|
|
int hpt_set_vdev_info(DEVICEID dev, PSET_VDEV_INFO pInfo);
|
|
#endif
|
|
|
|
/* hpt_init_disks
|
|
* initialize disks for use
|
|
* Version compatibility: v2.0.0.0 or later
|
|
* Parameters:
|
|
* ndev - number of disks to initialize
|
|
* pIds - array of DEVICEID
|
|
*
|
|
* Returns:
|
|
* 0 - Success
|
|
*/
|
|
#if HPT_INTERFACE_VERSION>=0x02000000
|
|
int hpt_init_disks(HPT_U32 ndev, DEVICEID * pIds);
|
|
#endif
|
|
|
|
/* hpt_calc_max_array_capacity
|
|
* cap max capacity of the array user want to create or transform
|
|
* Version compatibility: v1.2.0.0 or later
|
|
* Parameters:
|
|
* source - if transform, this is the source array, otherwise, it should be zero
|
|
* destInfo - target array params
|
|
* Returns:
|
|
* 0 - Success
|
|
* cap - max capacity of the target array
|
|
*/
|
|
#if HPT_INTERFACE_VERSION>=0x01020000
|
|
int hpt_calc_max_array_capacity(DEVICEID source, PCREATE_ARRAY_PARAMS_V2 destInfo, HPT_U64 * cap);
|
|
#endif
|
|
|
|
/* hpt_rebuild_data_block2
|
|
* Used to copy data from source disk and mirror disk.
|
|
* Version compatibility: v1.1.0.0 or later
|
|
* Parameters:
|
|
* idArray Array ID (RAID1, 0/1 or RAID5)
|
|
* Lba Start LBA for each array member
|
|
* nSector Number of sectors for each array member (RAID 5 will ignore this parameter)
|
|
*
|
|
* Returns:
|
|
* 0 Success, event info is filled in *pEvent
|
|
*/
|
|
#if HPT_INTERFACE_VERSION>=0x01010000
|
|
int hpt_rebuild_data_block_v2(DEVICEID idMirror, HPT_U64 Lba, HPT_U16 nSector);
|
|
#endif
|
|
|
|
/* hpt_verify_data_block2
|
|
* verify data block on RAID1 or RAID5.
|
|
* Version compatibility: v1.1.0.0 or later
|
|
* Parameters:
|
|
* idArray - Array ID
|
|
* Lba - block number (on each array member, not logical block!)
|
|
* nSectors - Sectors for each member (RAID 5 will ignore this parameter)
|
|
* Returns:
|
|
* 0 Success
|
|
* 1 Data compare error
|
|
* 2 I/O error
|
|
*/
|
|
#if HPT_INTERFACE_VERSION>=0x01010000
|
|
int hpt_verify_data_block_v2(DEVICEID idArray, HPT_U64 Lba, HPT_U16 nSectors);
|
|
#endif
|
|
|
|
/* hpt_initialize_data_block2
|
|
* initialize data block (fill with zero) on RAID5
|
|
* Version compatibility: v1.1.0.0 or later
|
|
* Parameters:
|
|
* idArray - Array ID
|
|
* Lba - block number (on each array member, not logical block!)
|
|
* nSectors - Sectors for each member (RAID 5 will ignore this parameter)
|
|
* Returns:
|
|
* 0 Success
|
|
*/
|
|
#if HPT_INTERFACE_VERSION>=0x01010000
|
|
int hpt_initialize_data_block_v2(DEVICEID idArray, HPT_U64 Lba, HPT_U16 nSectors);
|
|
#endif
|
|
|
|
/* hpt_i2c_transaction
|
|
* perform an transaction on i2c bus
|
|
* Version compatibility: v2.0.0.0 or later
|
|
* Parameters:
|
|
* indata[0] - controller ID
|
|
* Returns:
|
|
* 0 Success
|
|
*/
|
|
#if HPT_INTERFACE_VERSION>=0x01020000
|
|
int hpt_i2c_transaction(HPT_U8 *indata, HPT_U32 inlen, HPT_U8 *outdata, HPT_U32 outlen, HPT_U32 *poutlen);
|
|
#endif
|
|
|
|
/* hpt_get_parameter_list
|
|
* get a list of driver parameters.
|
|
* Version compatibility: v1.0.0.0 or later
|
|
* Parameters:
|
|
* location - parameter location
|
|
* outBuffer - a buffer to hold the output
|
|
* outBufferSize - size of outBuffer
|
|
* Returns:
|
|
* 0 Success
|
|
* put in outBuffer a list of zero terminated parameter names. the whole list
|
|
* is terminated with an additional zero byte.
|
|
*/
|
|
int hpt_get_parameter_list(HPT_U32 location, char *outBuffer, HPT_U32 outBufferSize);
|
|
|
|
/* hpt_{get,set}_parameter
|
|
* get/set a parameter value.
|
|
* Version compatibility: v1.0.0.0 or later
|
|
* Parameters:
|
|
* pParam - a pointer to HPT_DRIVER_PARAMETER.
|
|
* Returns:
|
|
* 0 Success
|
|
*/
|
|
int hpt_get_parameter(PHPT_DRIVER_PARAMETER pParam);
|
|
int hpt_set_parameter(PHPT_DRIVER_PARAMETER pParam);
|
|
|
|
#endif
|
|
|
|
#pragma pack()
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
#endif
|