9a54cbb95d
the falling edge of a media state change. This is in preparation for media state change notification to the routing socket. No objections by: sam, wpaul, ru, bms Brucification by: bde
437 lines
11 KiB
C
437 lines
11 KiB
C
/*
|
|
* Copyright (c) 1997, 1998, 1999
|
|
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* driver for Micro Linear 6692 PHYs
|
|
*
|
|
* The Micro Linear 6692 is a strange beast, and dealing with it using
|
|
* this code framework is tricky. The 6692 is actually a 100Mbps-only
|
|
* device, which means that a second PHY is required to support 10Mbps
|
|
* modes. However, even though the 6692 does not support 10Mbps modes,
|
|
* it can still advertise them when performing autonegotiation. If a
|
|
* 10Mbps mode is negotiated, we must program the registers of the
|
|
* companion PHY accordingly in addition to programming the registers
|
|
* of the 6692.
|
|
*
|
|
* This device also does not have vendor/device ID registers.
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/module.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/malloc.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
|
|
#include "miibus_if.h"
|
|
|
|
#define ML_STATE_AUTO_SELF 1
|
|
#define ML_STATE_AUTO_OTHER 2
|
|
|
|
struct mlphy_softc {
|
|
struct mii_softc ml_mii;
|
|
int ml_state;
|
|
int ml_linked;
|
|
};
|
|
|
|
static int mlphy_probe(device_t);
|
|
static int mlphy_attach(device_t);
|
|
|
|
static device_method_t mlphy_methods[] = {
|
|
/* device interface */
|
|
DEVMETHOD(device_probe, mlphy_probe),
|
|
DEVMETHOD(device_attach, mlphy_attach),
|
|
DEVMETHOD(device_detach, mii_phy_detach),
|
|
DEVMETHOD(device_shutdown, bus_generic_shutdown),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static devclass_t mlphy_devclass;
|
|
|
|
static driver_t mlphy_driver = {
|
|
"mlphy",
|
|
mlphy_methods,
|
|
sizeof(struct mlphy_softc)
|
|
};
|
|
|
|
DRIVER_MODULE(mlphy, miibus, mlphy_driver, mlphy_devclass, 0, 0);
|
|
|
|
static int mlphy_service(struct mii_softc *, struct mii_data *, int);
|
|
static void mlphy_reset(struct mii_softc *);
|
|
static void mlphy_status(struct mii_softc *);
|
|
|
|
static int
|
|
mlphy_probe(dev)
|
|
device_t dev;
|
|
{
|
|
struct mii_attach_args *ma;
|
|
device_t parent;
|
|
|
|
ma = device_get_ivars(dev);
|
|
parent = device_get_parent(device_get_parent(dev));
|
|
|
|
/*
|
|
* Micro Linear PHY reports oui == 0 model == 0
|
|
*/
|
|
if (MII_OUI(ma->mii_id1, ma->mii_id2) != 0 ||
|
|
MII_MODEL(ma->mii_id2) != 0)
|
|
return (ENXIO);
|
|
|
|
/*
|
|
* Make sure the parent is a `tl'. So far, I have only
|
|
* encountered the 6692 on an Olicom card with a ThunderLAN
|
|
* controller chip.
|
|
*/
|
|
if (strcmp(device_get_name(parent), "tl") != 0)
|
|
return (ENXIO);
|
|
|
|
device_set_desc(dev, "Micro Linear 6692 media interface");
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mlphy_attach(dev)
|
|
device_t dev;
|
|
{
|
|
struct mlphy_softc *msc;
|
|
struct mii_softc *sc;
|
|
struct mii_attach_args *ma;
|
|
struct mii_data *mii;
|
|
|
|
msc = device_get_softc(dev);
|
|
sc = &msc->ml_mii;
|
|
ma = device_get_ivars(dev);
|
|
sc->mii_dev = device_get_parent(dev);
|
|
mii = device_get_softc(sc->mii_dev);
|
|
LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);
|
|
|
|
sc->mii_inst = mii->mii_instance;
|
|
sc->mii_phy = ma->mii_phyno;
|
|
sc->mii_service = mlphy_service;
|
|
sc->mii_pdata = mii;
|
|
|
|
mii->mii_instance++;
|
|
|
|
#define ADD(m, c) ifmedia_add(&mii->mii_media, (m), (c), NULL)
|
|
|
|
#if 0 /* See above. */
|
|
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->mii_inst),
|
|
BMCR_ISO);
|
|
#endif
|
|
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_LOOP, sc->mii_inst),
|
|
BMCR_LOOP|BMCR_S100);
|
|
|
|
sc->mii_flags &= ~MIIF_NOISOLATE;
|
|
mii_phy_reset(sc);
|
|
sc->mii_flags |= MIIF_NOISOLATE;
|
|
|
|
sc->mii_capabilities =
|
|
PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
|
|
ma->mii_capmask = ~sc->mii_capabilities;
|
|
device_printf(dev, " ");
|
|
mii_add_media(sc);
|
|
printf("\n");
|
|
#undef ADD
|
|
MIIBUS_MEDIAINIT(sc->mii_dev);
|
|
return(0);
|
|
}
|
|
|
|
static int
|
|
mlphy_service(xsc, mii, cmd)
|
|
struct mii_softc *xsc;
|
|
struct mii_data *mii;
|
|
int cmd;
|
|
{
|
|
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
|
|
int reg;
|
|
struct mii_softc *other = NULL;
|
|
struct mlphy_softc *msc = (struct mlphy_softc *)xsc;
|
|
struct mii_softc *sc = (struct mii_softc *)&msc->ml_mii;
|
|
device_t *devlist;
|
|
int devs, i;
|
|
|
|
/*
|
|
* See if there's another PHY on this bus with us.
|
|
* If so, we may need it for 10Mbps modes.
|
|
*/
|
|
device_get_children(msc->ml_mii.mii_dev, &devlist, &devs);
|
|
for (i = 0; i < devs; i++) {
|
|
if (strcmp(device_get_name(devlist[i]), "mlphy")) {
|
|
other = device_get_softc(devlist[i]);
|
|
break;
|
|
}
|
|
}
|
|
free(devlist, M_TEMP);
|
|
|
|
switch (cmd) {
|
|
case MII_POLLSTAT:
|
|
/*
|
|
* If we're not polling our PHY instance, just return.
|
|
*/
|
|
if (IFM_INST(ife->ifm_media) != sc->mii_inst)
|
|
return (0);
|
|
break;
|
|
|
|
case MII_MEDIACHG:
|
|
/*
|
|
* If the media indicates a different PHY instance,
|
|
* isolate ourselves.
|
|
*/
|
|
if (IFM_INST(ife->ifm_media) != sc->mii_inst) {
|
|
reg = PHY_READ(sc, MII_BMCR);
|
|
PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* If the interface is not up, don't do anything.
|
|
*/
|
|
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
|
|
break;
|
|
|
|
switch (IFM_SUBTYPE(ife->ifm_media)) {
|
|
case IFM_AUTO:
|
|
/*
|
|
* For autonegotiation, reset and isolate the
|
|
* companion PHY (if any) and then do NWAY
|
|
* autonegotiation ourselves.
|
|
*/
|
|
msc->ml_state = ML_STATE_AUTO_SELF;
|
|
if (other != NULL) {
|
|
mii_phy_reset(other);
|
|
PHY_WRITE(other, MII_BMCR, BMCR_ISO);
|
|
}
|
|
(void) mii_phy_auto(sc);
|
|
msc->ml_linked = 0;
|
|
return(0);
|
|
case IFM_10_T:
|
|
/*
|
|
* For 10baseT modes, reset and program the
|
|
* companion PHY (of any), then program ourselves
|
|
* to match. This will put us in pass-through
|
|
* mode and let the companion PHY do all the
|
|
* work.
|
|
*
|
|
* BMCR data is stored in the ifmedia entry.
|
|
*/
|
|
if (other != NULL) {
|
|
mii_phy_reset(other);
|
|
PHY_WRITE(other, MII_BMCR, ife->ifm_data);
|
|
}
|
|
PHY_WRITE(sc, MII_ANAR, mii_anar(ife->ifm_media));
|
|
PHY_WRITE(sc, MII_BMCR, ife->ifm_data);
|
|
msc->ml_state = 0;
|
|
break;
|
|
case IFM_100_TX:
|
|
/*
|
|
* For 100baseTX modes, reset and isolate the
|
|
* companion PHY (if any), then program ourselves
|
|
* accordingly.
|
|
*
|
|
* BMCR data is stored in the ifmedia entry.
|
|
*/
|
|
if (other != NULL) {
|
|
mii_phy_reset(other);
|
|
PHY_WRITE(other, MII_BMCR, BMCR_ISO);
|
|
}
|
|
PHY_WRITE(sc, MII_ANAR, mii_anar(ife->ifm_media));
|
|
PHY_WRITE(sc, MII_BMCR, ife->ifm_data);
|
|
msc->ml_state = 0;
|
|
break;
|
|
case IFM_100_T4:
|
|
/*
|
|
* XXX Not supported as a manual setting right now.
|
|
*/
|
|
return (EINVAL);
|
|
default:
|
|
break;
|
|
|
|
}
|
|
break;
|
|
|
|
case MII_TICK:
|
|
/*
|
|
* If we're not currently selected, just return.
|
|
*/
|
|
if (IFM_INST(ife->ifm_media) != sc->mii_inst)
|
|
return (0);
|
|
|
|
/*
|
|
* Is the interface even up?
|
|
*/
|
|
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
|
|
return (0);
|
|
|
|
/*
|
|
* Only used for autonegotiation.
|
|
*/
|
|
if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO)
|
|
break;
|
|
|
|
/*
|
|
* Check to see if we have link. If we do, we don't
|
|
* need to restart the autonegotiation process. Read
|
|
* the BMSR twice in case it's latched.
|
|
* If we're in a 10Mbps mode, check the link of the
|
|
* 10Mbps PHY. Sometimes the Micro Linear PHY's
|
|
* linkstat bit will clear while the linkstat bit of
|
|
* the companion PHY will remain set.
|
|
*/
|
|
if (msc->ml_state == ML_STATE_AUTO_OTHER) {
|
|
reg = PHY_READ(other, MII_BMSR) |
|
|
PHY_READ(other, MII_BMSR);
|
|
} else {
|
|
reg = PHY_READ(sc, MII_BMSR) |
|
|
PHY_READ(sc, MII_BMSR);
|
|
}
|
|
|
|
if (reg & BMSR_LINK) {
|
|
if (!msc->ml_linked) {
|
|
msc->ml_linked = 1;
|
|
mlphy_status(sc);
|
|
}
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Only retry autonegotiation every 5 seconds.
|
|
*/
|
|
if (++sc->mii_ticks <= 5)
|
|
break;
|
|
|
|
sc->mii_ticks = 0;
|
|
msc->ml_linked = 0;
|
|
mii->mii_media_active = IFM_NONE;
|
|
mii_phy_reset(sc);
|
|
msc->ml_state = ML_STATE_AUTO_SELF;
|
|
if (other != NULL) {
|
|
mii_phy_reset(other);
|
|
PHY_WRITE(other, MII_BMCR, BMCR_ISO);
|
|
}
|
|
mii_phy_auto(sc);
|
|
return(0);
|
|
}
|
|
|
|
/* Update the media status. */
|
|
|
|
if (msc->ml_state == ML_STATE_AUTO_OTHER) {
|
|
int other_inst;
|
|
other_inst = other->mii_inst;
|
|
other->mii_inst = sc->mii_inst;
|
|
(void) (*other->mii_service)(other, mii, MII_POLLSTAT);
|
|
other->mii_inst = other_inst;
|
|
sc->mii_media_active = other->mii_media_active;
|
|
sc->mii_media_status = other->mii_media_status;
|
|
} else
|
|
ukphy_status(sc);
|
|
|
|
/* Callback if something changed. */
|
|
mii_phy_update(sc, cmd);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* The Micro Linear PHY comes out of reset with the 'autoneg
|
|
* enable' bit set, which we don't want.
|
|
*/
|
|
static void
|
|
mlphy_reset(sc)
|
|
struct mii_softc *sc;
|
|
{
|
|
int reg;
|
|
|
|
mii_phy_reset(sc);
|
|
reg = PHY_READ(sc, MII_BMCR);
|
|
reg &= ~BMCR_AUTOEN;
|
|
PHY_WRITE(sc, MII_BMCR, reg);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* If we negotiate a 10Mbps mode, we need to check for an alternate
|
|
* PHY and make sure it's enabled and set correctly.
|
|
*/
|
|
static void
|
|
mlphy_status(sc)
|
|
struct mii_softc *sc;
|
|
{
|
|
struct mlphy_softc *msc = (struct mlphy_softc *)sc;
|
|
struct mii_data *mii = msc->ml_mii.mii_pdata;
|
|
struct mii_softc *other = NULL;
|
|
device_t *devlist;
|
|
int devs, i;
|
|
|
|
/* See if there's another PHY on the bus with us. */
|
|
device_get_children(msc->ml_mii.mii_dev, &devlist, &devs);
|
|
for (i = 0; i < devs; i++) {
|
|
if (strcmp(device_get_name(devlist[i]), "mlphy")) {
|
|
other = device_get_softc(devlist[i]);
|
|
break;
|
|
}
|
|
}
|
|
free(devlist, M_TEMP);
|
|
|
|
if (other == NULL)
|
|
return;
|
|
|
|
ukphy_status(sc);
|
|
|
|
if (IFM_SUBTYPE(mii->mii_media_active) != IFM_10_T) {
|
|
msc->ml_state = ML_STATE_AUTO_SELF;
|
|
mii_phy_reset(other);
|
|
PHY_WRITE(other, MII_BMCR, BMCR_ISO);
|
|
}
|
|
|
|
if (IFM_SUBTYPE(mii->mii_media_active) == IFM_10_T) {
|
|
msc->ml_state = ML_STATE_AUTO_OTHER;
|
|
mlphy_reset(&msc->ml_mii);
|
|
PHY_WRITE(&msc->ml_mii, MII_BMCR, BMCR_ISO);
|
|
mii_phy_reset(other);
|
|
mii_phy_auto(other);
|
|
}
|
|
|
|
return;
|
|
}
|