d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f1be1cdc88
freebsd-skq/sys/dev/ed/if_ed_pccard.c
Warner Losh d118c9a5fb Belkin F5D5020 is an OEM'd card from RACORE based on the AX88190 
chipset.  Add support for this card.  Office Max has them on sale and
I was surprised that we didn't have it in our supported list when I
plugged it in...
2005-02-22 22:07:18 +00:00

646 lines
19 KiB
C
Raw Blame History

/*-
* Copyright (c) 1995, David Greenman
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include "opt_ed.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/socket.h>
#include <sys/kernel.h>
#include <sys/conf.h>
#include <sys/uio.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/if_mib.h>
#include <net/if_media.h>
#include <dev/ed/if_edreg.h>
#include <dev/ed/if_edvar.h>
#include <dev/pccard/pccardvar.h>
#include <dev/pccard/pccard_cis.h>
#ifndef ED_NO_MIIBUS
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#endif
#include "card_if.h"
#ifndef ED_NO_MIIBUS
/* "device miibus" required. See GENERIC if you get errors here. */
#include "miibus_if.h"
#endif
#include "pccarddevs.h"
#ifndef ED_NO_MIIBUS
MODULE_DEPEND(ed, miibus, 1, 1, 1);
#endif
MODULE_DEPEND(ed, ether, 1, 1, 1);
/*
* PC Cards should be using a network specific FUNCE in the CIS to
* communicate their MAC address to the driver. However, there are a
* large number of NE-2000ish PC Cards that don't do this. Nearly all
* of them store the MAC address at a fixed offset into attribute
* memory, without any reference at all appearing in the CIS. And
* nearly all of those store it at the same location.
*/
#define ED_DEFAULT_MAC_OFFSET 0xff0
/*
* PC-Card (PCMCIA) specific code.
*/
static int ed_pccard_match(device_t);
static int ed_pccard_probe(device_t);
static int ed_pccard_attach(device_t);
static int ed_pccard_ax88x90(device_t dev);
static void ax88x90_geteprom(struct ed_softc *);
static int ed_pccard_memread(device_t dev, off_t offset, u_char *byte);
static int ed_pccard_memwrite(device_t dev, off_t offset, u_char byte);
#ifndef ED_NO_MIIBUS
static void ed_pccard_dlink_mii_reset(struct ed_softc *sc);
static u_int ed_pccard_dlink_mii_readbits(struct ed_softc *sc, int nbits);
static void ed_pccard_dlink_mii_writebits(struct ed_softc *sc, u_int val,
int nbits);
#endif
static int ed_pccard_Linksys(device_t dev);
static const struct ed_product {
struct pccard_product prod;
int flags;
#define NE2000DVF_DL100XX 0x0001 /* chip is D-Link DL10019/22 */
#define NE2000DVF_AX88X90 0x0002 /* chip is ASIX AX88[17]90 */
#define NE2000DVF_ENADDR 0x0004 /* Get MAC from attr mem */
int enoff;
} ed_pccard_products[] = {
{ PCMCIA_CARD(ACCTON, EN2212, 0), 0},
{ PCMCIA_CARD(ACCTON, EN2216, 0), 0},
{ PCMCIA_CARD(ALLIEDTELESIS, LA_PCM, 0), 0},
{ PCMCIA_CARD(AMBICOM, AMB8002T, 0), 0},
{ PCMCIA_CARD(BILLIONTON, LNT10TN, 0), 0},
{ PCMCIA_CARD(BILLIONTON, CFLT10N, 0), 0},
{ PCMCIA_CARD(BUFFALO, LPC3_CLT, 0), 0},
{ PCMCIA_CARD(BUFFALO, LPC3_CLX, 0), NE2000DVF_AX88X90},
{ PCMCIA_CARD(BUFFALO, LPC_CF_CLT, 0), 0},
{ PCMCIA_CARD(CNET, NE2000, 0), 0},
{ PCMCIA_CARD(COMPEX, LINKPORT_ENET_B, 0), 0},
{ PCMCIA_CARD(COREGA, ETHER_II_PCC_T, 0), 0},
{ PCMCIA_CARD(COREGA, ETHER_II_PCC_TD, 0), 0},
{ PCMCIA_CARD(COREGA, ETHER_PCC_T, 0), 0},
{ PCMCIA_CARD(COREGA, ETHER_PCC_TD, 0), 0},
{ PCMCIA_CARD(COREGA, FAST_ETHER_PCC_TX, 0), NE2000DVF_DL100XX },
{ PCMCIA_CARD(COREGA, FETHER_PCC_TXD, 0), NE2000DVF_AX88X90 },
{ PCMCIA_CARD(COREGA, FETHER_PCC_TXF, 0), NE2000DVF_DL100XX },
{ PCMCIA_CARD(DAYNA, COMMUNICARD_E_1, 0), 0},
{ PCMCIA_CARD(DAYNA, COMMUNICARD_E_2, 0), 0},
{ PCMCIA_CARD(DLINK, DE650, 0), 0},
{ PCMCIA_CARD(DLINK, DE660, 0), 0 },
{ PCMCIA_CARD(DLINK, DE660PLUS, 0), 0},
{ PCMCIA_CARD(DLINK, DFE670TXD, 0), NE2000DVF_DL100XX },
{ PCMCIA_CARD(DYNALINK, L10C, 0), 0},
{ PCMCIA_CARD(EDIMAX, EP4000A, 0), 0},
{ PCMCIA_CARD(EPSON, EEN10B, 0), 0},
{ PCMCIA_CARD(EXP, THINLANCOMBO, 0), 0},
{ PCMCIA_CARD(GREY_CELL, DMF650TX, 0), 0},
{ PCMCIA_CARD(IBM, HOME_AND_AWAY, 0), 0},
{ PCMCIA_CARD(IBM, INFOMOVER, 0), NE2000DVF_ENADDR, 0xff0},
{ PCMCIA_CARD(IODATA3, PCLAT, 0), 0},
{ PCMCIA_CARD(KINGSTON, KNE2, 0), 0},
{ PCMCIA_CARD(LANTECH, FASTNETTX, 0),NE2000DVF_AX88X90 },
{ PCMCIA_CARD(LINKSYS, COMBO_ECARD, 0),
NE2000DVF_DL100XX | NE2000DVF_AX88X90 },
{ PCMCIA_CARD(LINKSYS, ECARD_1, 0), 0},
{ PCMCIA_CARD(LINKSYS, ECARD_2, 0), 0},
{ PCMCIA_CARD(LINKSYS, ETHERFAST, 0), NE2000DVF_DL100XX },
{ PCMCIA_CARD(LINKSYS, TRUST_COMBO_ECARD, 0), 0},
{ PCMCIA_CARD(MACNICA, ME1_JEIDA, 0), 0},
{ PCMCIA_CARD(MAGICRAM, ETHER, 0), 0},
{ PCMCIA_CARD(MELCO, LPC3_CLX, 0), NE2000DVF_AX88X90 },
{ PCMCIA_CARD(MELCO, LPC3_TX, 0), NE2000DVF_AX88X90 },
{ PCMCIA_CARD(NDC, ND5100_E, 0), 0},
{ PCMCIA_CARD(NETGEAR, FA410TXC, 0), NE2000DVF_DL100XX},
{ PCMCIA_CARD(NETGEAR, FA411, 0), NE2000DVF_AX88X90},
{ PCMCIA_CARD(NEXTCOM, NEXTHAWK, 0), 0},
{ PCMCIA_CARD(OEM2, ETHERNET, 0), 0},
{ PCMCIA_CARD(PLANET, SMARTCOM2000, 0), 0 },
{ PCMCIA_CARD(PREMAX, PE200, 0), 0},
{ PCMCIA_CARD(RACORE, ETHERNET, 0), 0},
{ PCMCIA_CARD(RACORE, FASTENET, 0), NE2000DVF_AX88X90},
{ PCMCIA_CARD(RPTI, EP400, 0), 0},
{ PCMCIA_CARD(RPTI, EP401, 0), 0},
{ PCMCIA_CARD(SMC, EZCARD, 0), 0},
{ PCMCIA_CARD(SOCKET, EA_ETHER, 0), 0},
{ PCMCIA_CARD(SOCKET, LP_ETHER, 0), 0},
{ PCMCIA_CARD(SOCKET, LP_ETHER_CF, 0), 0},
{ PCMCIA_CARD(SOCKET, LP_ETH_10_100_CF, 0), NE2000DVF_DL100XX},
{ PCMCIA_CARD(SVEC, COMBOCARD, 0), 0},
{ PCMCIA_CARD(SVEC, LANCARD, 0), 0},
{ PCMCIA_CARD(TAMARACK, ETHERNET, 0), 0},
{ PCMCIA_CARD(TDK, LAK_CD031, 0), 0},
{ PCMCIA_CARD(TELECOMDEVICE, TCD_HPC100, 0), NE2000DVF_AX88X90 },
{ PCMCIA_CARD(XIRCOM, CFE_10, 0), 0},
{ PCMCIA_CARD(ZONET, ZEN, 0), 0},
{ { NULL } }
};
static int
ed_pccard_match(device_t dev)
{
const struct ed_product *pp;
int error;
uint32_t fcn = PCCARD_FUNCTION_UNSPEC;
/* Make sure we're a network function */
error = pccard_get_function(dev, &fcn);
if (error != 0)
return (error);
if (fcn != PCCARD_FUNCTION_NETWORK)
return (ENXIO);
if ((pp = (const struct ed_product *) pccard_product_lookup(dev,
(const struct pccard_product *) ed_pccard_products,
sizeof(ed_pccard_products[0]), NULL)) != NULL) {
if (pp->prod.pp_name != NULL)
device_set_desc(dev, pp->prod.pp_name);
return (0);
}
return (ENXIO);
}
/*
* Probe framework for pccards. Replicates the standard framework,
* minus the pccard driver registration and ignores the ether address
* supplied (from the CIS), relying on the probe to find it instead.
*/
static int
ed_pccard_probe(device_t dev)
{
const struct ed_product *pp;
int error;
if ((pp = (const struct ed_product *) pccard_product_lookup(dev,
(const struct pccard_product *) ed_pccard_products,
sizeof(ed_pccard_products[0]), NULL)) == NULL)
return (ENXIO);
if (pp->flags & NE2000DVF_DL100XX) {
error = ed_probe_Novell(dev, 0, 0);
if (error == 0)
error = ed_pccard_Linksys(dev);
ed_release_resources(dev);
if (error == 0)
goto end2;
}
if (pp->flags & NE2000DVF_AX88X90) {
error = ed_pccard_ax88x90(dev);
if (error == 0)
goto end2;
}
error = ed_probe_Novell(dev, 0, 0);
end2:
if (error == 0)
error = ed_alloc_irq(dev, 0, 0);
ed_release_resources(dev);
return (error);
}
static int
ed_pccard_rom_mac(device_t dev, uint8_t *enaddr)
{
struct ed_softc *sc = device_get_softc(dev);
uint8_t romdata[16];
int i;
/*
* Read in the rom data at location 0. We should see one of
* two patterns. Either you'll see odd locations 0xff and
* even locations data, or you'll see odd and even locations
* mirror each other. In addition, the last two even locations
* should be 0. If they aren't 0, then we'll assume that
* there's no valid ROM data on this card and try another method
* to recover the MAC address. Since there are no NE-1000
* based PC Card devices, we'll assume we're 16-bit.
*/
ed_pio_readmem(sc, 0, romdata, 16);
if (romdata[12] != 0 || romdata[14] != 0)
return 0;
for (i = 0; i < ETHER_ADDR_LEN; i++)
enaddr[i] = romdata[i * 2];
return 1;
}
static int
ed_pccard_attach(device_t dev)
{
int error, i;
struct ed_softc *sc = device_get_softc(dev);
u_char sum;
u_char enaddr[ETHER_ADDR_LEN];
const struct ed_product *pp;
if ((pp = (const struct ed_product *) pccard_product_lookup(dev,
(const struct pccard_product *) ed_pccard_products,
sizeof(ed_pccard_products[0]), NULL)) == NULL)
return (ENXIO);
if (sc->port_used > 0)
ed_alloc_port(dev, sc->port_rid, sc->port_used);
if (sc->mem_used)
ed_alloc_memory(dev, sc->mem_rid, sc->mem_used);
ed_alloc_irq(dev, sc->irq_rid, 0);
error = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_NET, edintr, sc,
&sc->irq_handle);
if (error) {
device_printf(dev, "setup intr failed %d \n", error);
ed_release_resources(dev);
return (error);
}
/*
* For the older cards, we have to get the MAC address from
* the card in some way. Let's try the standard PCMCIA way
* first. If that fails, then check to see if we have valid
* data from the standard NE-2000 data roms. If that fails,
* check to see if the card has a hint about where to look in
* its CIS. If that fails, maybe we should look at some
* default value. In all fails, we should fail the attach,
* but don't right now.
*/
if (sc->chip_type == ED_CHIP_TYPE_DP8390) {
pccard_get_ether(dev, enaddr);
if (bootverbose)
device_printf(dev, "CIS MAC %6D\n", enaddr, ":");
for (i = 0, sum = 0; i < ETHER_ADDR_LEN; i++)
sum |= enaddr[i];
if (sum == 0 && ed_pccard_rom_mac(dev, enaddr)) {
if (bootverbose)
device_printf(dev, "ROM mac %6D\n", enaddr,
":");
sum++;
}
if (sum == 0 && pp->flags & NE2000DVF_ENADDR) {
for (i = 0; i < ETHER_ADDR_LEN; i++) {
ed_pccard_memread(dev, pp->enoff + i * 2,
enaddr + i);
sum |= enaddr[i];
}
if (bootverbose)
device_printf(dev, "Hint MAC %6D\n", enaddr,
":");
}
if (sum == 0) {
for (i = 0; i < ETHER_ADDR_LEN; i++) {
ed_pccard_memread(dev, ED_DEFAULT_MAC_OFFSET +
i * 2, enaddr + i);
sum |= enaddr[i];
}
if (bootverbose)
device_printf(dev, "Fallback MAC %6D\n",
enaddr, ":");
}
if (sum == 0) {
device_printf(dev, "Cannot extract MAC address.\n");
ed_release_resources(dev);
return (ENXIO);
}
bcopy(enaddr, sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
}
error = ed_attach(dev);
#ifndef ED_NO_MIIBUS
if (error == 0 && (sc->chip_type == ED_CHIP_TYPE_DL10019 ||
sc->chip_type == ED_CHIP_TYPE_DL10022)) {
/* Probe for an MII bus, but ignore errors. */
ed_pccard_dlink_mii_reset(sc);
sc->mii_readbits = ed_pccard_dlink_mii_readbits;
sc->mii_writebits = ed_pccard_dlink_mii_writebits;
mii_phy_probe(dev, &sc->miibus, ed_ifmedia_upd,
ed_ifmedia_sts);
}
#endif
return (error);
}
static void
ax88x90_geteprom(struct ed_softc *sc)
{
int prom[16],i;
u_char tmp;
struct {
unsigned char offset, value;
} pg_seq[] = {
{ED_P0_CR, ED_CR_RD2|ED_CR_STP},/* Select Page0 */
{ED_P0_DCR, 0x01},
{ED_P0_RBCR0, 0x00}, /* Clear the count regs. */
{ED_P0_RBCR1, 0x00},
{ED_P0_IMR, 0x00}, /* Mask completion irq. */
{ED_P0_ISR, 0xff},
{ED_P0_RCR, ED_RCR_MON | ED_RCR_INTT}, /* Set To Monitor */
{ED_P0_TCR, ED_TCR_LB0}, /* loopback mode. */
{ED_P0_RBCR0, 32},
{ED_P0_RBCR1, 0x00},
{ED_P0_RSAR0, 0x00},
{ED_P0_RSAR1, 0x04},
{ED_P0_CR ,ED_CR_RD0 | ED_CR_STA},
};
/* Reset Card */
tmp = ed_asic_inb(sc, ED_NOVELL_RESET);
ed_asic_outb(sc, ED_NOVELL_RESET, tmp);
DELAY(5000);
ed_asic_outb(sc, ED_P0_CR, ED_CR_RD2 | ED_CR_STP);
DELAY(5000);
/* Card Settings */
for (i = 0; i < sizeof(pg_seq) / sizeof(pg_seq[0]); i++)
ed_nic_outb(sc, pg_seq[i].offset, pg_seq[i].value);
/* Get Data */
for (i = 0; i < 16; i++)
prom[i] = ed_asic_inb(sc, 0);
sc->arpcom.ac_enaddr[0] = prom[0] & 0xff;
sc->arpcom.ac_enaddr[1] = prom[0] >> 8;
sc->arpcom.ac_enaddr[2] = prom[1] & 0xff;
sc->arpcom.ac_enaddr[3] = prom[1] >> 8;
sc->arpcom.ac_enaddr[4] = prom[2] & 0xff;
sc->arpcom.ac_enaddr[5] = prom[2] >> 8;
}
static int
ed_pccard_memwrite(device_t dev, off_t offset, u_char byte)
{
int cis_rid;
struct resource *cis;
cis_rid = 0;
cis = bus_alloc_resource(dev, SYS_RES_MEMORY, &cis_rid, 0, ~0,
4 << 10, RF_ACTIVE | RF_SHAREABLE);
if (cis == NULL)
return (ENXIO);
CARD_SET_RES_FLAGS(device_get_parent(dev), dev, SYS_RES_MEMORY,
cis_rid, PCCARD_A_MEM_ATTR);
bus_space_write_1(rman_get_bustag(cis), rman_get_bushandle(cis),
offset, byte);
bus_deactivate_resource(dev, SYS_RES_MEMORY, cis_rid, cis);
bus_release_resource(dev, SYS_RES_MEMORY, cis_rid, cis);
return (0);
}
static int
ed_pccard_memread(device_t dev, off_t offset, u_char *byte)
{
int cis_rid;
struct resource *cis;
cis_rid = 0;
cis = bus_alloc_resource(dev, SYS_RES_MEMORY, &cis_rid, 0, ~0,
4 << 10, RF_ACTIVE | RF_SHAREABLE);
if (cis == NULL)
return (ENXIO);
CARD_SET_RES_FLAGS(device_get_parent(dev), dev, SYS_RES_MEMORY,
cis_rid, PCCARD_A_MEM_ATTR);
*byte = bus_space_read_1(rman_get_bustag(cis), rman_get_bushandle(cis),
offset);
bus_deactivate_resource(dev, SYS_RES_MEMORY, cis_rid, cis);
bus_release_resource(dev, SYS_RES_MEMORY, cis_rid, cis);
return (0);
}
/*
* Probe the Ethernet MAC addrees for PCMCIA Linksys EtherFast 10/100
* and compatible cards (DL10019C Ethernet controller).
*
* Note: The PAO patches try to use more memory for the card, but that
* seems to fail for my card. A future optimization would add this back
* conditionally.
*/
static int
ed_pccard_Linksys(device_t dev)
{
struct ed_softc *sc = device_get_softc(dev);
u_char sum;
uint8_t id;
int i;
/*
* Linksys registers(offset from ASIC base)
*
* 0x04-0x09 : Physical Address Register 0-5 (PAR0-PAR5)
* 0x0A : Card ID Register (CIR)
* 0x0B : Check Sum Register (SR)
*/
for (sum = 0, i = 0x04; i < 0x0c; i++)
sum += ed_asic_inb(sc, i);
if (sum != 0xff)
return (ENXIO); /* invalid DL10019C */
for (i = 0; i < ETHER_ADDR_LEN; i++)
sc->arpcom.ac_enaddr[i] = ed_asic_inb(sc, 0x04 + i);
ed_nic_outb(sc, ED_P0_DCR, ED_DCR_WTS | ED_DCR_FT1 | ED_DCR_LS);
id = ed_asic_inb(sc, 0xf);
sc->isa16bit = 1;
sc->vendor = ED_VENDOR_NOVELL;
sc->type = ED_TYPE_NE2000;
sc->chip_type = (id & 0x90) == 0x90 ?
ED_CHIP_TYPE_DL10022 : ED_CHIP_TYPE_DL10019;
sc->type_str = ((id & 0x90) == 0x90) ? "DL10022" : "DL10019";
return (0);
}
/*
* Special setup for AX88[17]90
*/
static int
ed_pccard_ax88x90(device_t dev)
{
int error;
int flags = device_get_flags(dev);
int iobase;
char *ts;
struct ed_softc *sc = device_get_softc(dev);
/* Allocate the port resource during setup. */
error = ed_alloc_port(dev, 0, ED_NOVELL_IO_PORTS);
if (error)
return (error);
sc->asic_offset = ED_NOVELL_ASIC_OFFSET;
sc->nic_offset = ED_NOVELL_NIC_OFFSET;
sc->chip_type = ED_CHIP_TYPE_AX88190;
/*
* Set Attribute Memory IOBASE Register. Is this a deficiency in
* the PC Card layer, or an ax88190 specific issue? xxx
*/
iobase = rman_get_start(sc->port_res);
ed_pccard_memwrite(dev, ED_AX88190_IOBASE0, iobase & 0xff);
ed_pccard_memwrite(dev, ED_AX88190_IOBASE1, (iobase >> 8) & 0xff);
ts = "AX88190";
if (ed_asic_inb(sc, ED_ASIX_TEST) != 0) {
ed_pccard_memwrite(dev, ED_AX88790_CSR, ED_AX88790_CSR_PWRDWN);
ts = "AX88790";
}
ax88x90_geteprom(sc);
ed_release_resources(dev);
error = ed_probe_Novell(dev, 0, flags);
if (error == 0) {
sc->vendor = ED_VENDOR_NOVELL;
sc->type = ED_TYPE_NE2000;
sc->chip_type = ED_CHIP_TYPE_AX88190;
sc->type_str = ts;
}
return (error);
}
#ifndef ED_NO_MIIBUS
/* MII bit-twiddling routines for cards using Dlink chipset */
#define DLINK_MIISET(sc, x) ed_asic_outb(sc, ED_DLINK_MIIBUS, \
ed_asic_inb(sc, ED_DLINK_MIIBUS) | (x))
#define DLINK_MIICLR(sc, x) ed_asic_outb(sc, ED_DLINK_MIIBUS, \
ed_asic_inb(sc, ED_DLINK_MIIBUS) & ~(x))
static void
ed_pccard_dlink_mii_reset(sc)
struct ed_softc *sc;
{
if (sc->chip_type != ED_CHIP_TYPE_DL10022)
return;
ed_asic_outb(sc, ED_DLINK_MIIBUS, ED_DLINK_MII_RESET2);
DELAY(10);
ed_asic_outb(sc, ED_DLINK_MIIBUS,
ED_DLINK_MII_RESET2 | ED_DLINK_MII_RESET1);
DELAY(10);
ed_asic_outb(sc, ED_DLINK_MIIBUS, ED_DLINK_MII_RESET2);
DELAY(10);
ed_asic_outb(sc, ED_DLINK_MIIBUS,
ED_DLINK_MII_RESET2 | ED_DLINK_MII_RESET1);
DELAY(10);
ed_asic_outb(sc, ED_DLINK_MIIBUS, 0);
}
static void
ed_pccard_dlink_mii_writebits(sc, val, nbits)
struct ed_softc *sc;
u_int val;
int nbits;
{
int i;
if (sc->chip_type == ED_CHIP_TYPE_DL10022)
DLINK_MIISET(sc, ED_DLINK_MII_DIROUT_22);
else
DLINK_MIISET(sc, ED_DLINK_MII_DIROUT_19);
for (i = nbits - 1; i >= 0; i--) {
if ((val >> i) & 1)
DLINK_MIISET(sc, ED_DLINK_MII_DATAOUT);
else
DLINK_MIICLR(sc, ED_DLINK_MII_DATAOUT);
DELAY(10);
DLINK_MIISET(sc, ED_DLINK_MII_CLK);
DELAY(10);
DLINK_MIICLR(sc, ED_DLINK_MII_CLK);
DELAY(10);
}
}
static u_int
ed_pccard_dlink_mii_readbits(sc, nbits)
struct ed_softc *sc;
int nbits;
{
int i;
u_int val = 0;
if (sc->chip_type == ED_CHIP_TYPE_DL10022)
DLINK_MIICLR(sc, ED_DLINK_MII_DIROUT_22);
else
DLINK_MIICLR(sc, ED_DLINK_MII_DIROUT_19);
for (i = nbits - 1; i >= 0; i--) {
DLINK_MIISET(sc, ED_DLINK_MII_CLK);
DELAY(10);
val <<= 1;
if (ed_asic_inb(sc, ED_DLINK_MIIBUS) & ED_DLINK_MII_DATATIN)
val++;
DLINK_MIICLR(sc, ED_DLINK_MII_CLK);
DELAY(10);
}
return val;
}
#endif
static device_method_t ed_pccard_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, pccard_compat_probe),
DEVMETHOD(device_attach, pccard_compat_attach),
DEVMETHOD(device_detach, ed_detach),
#ifndef ED_NO_MIIBUS
/* Bus interface */
DEVMETHOD(bus_child_detached, ed_child_detached),
/* MII interface */
DEVMETHOD(miibus_readreg, ed_miibus_readreg),
DEVMETHOD(miibus_writereg, ed_miibus_writereg),
#endif
/* Card interface */
DEVMETHOD(card_compat_match, ed_pccard_match),
DEVMETHOD(card_compat_probe, ed_pccard_probe),
DEVMETHOD(card_compat_attach, ed_pccard_attach),
{ 0, 0 }
};
static driver_t ed_pccard_driver = {
"ed",
ed_pccard_methods,
sizeof(struct ed_softc)
};
DRIVER_MODULE(ed, pccard, ed_pccard_driver, ed_devclass, 0, 0);
#ifndef ED_NO_MIIBUS
DRIVER_MODULE(miibus, ed, miibus_driver, miibus_devclass, 0, 0);
#endif
Reference in New Issue View Git Blame Copy Permalink