bcae2312af
This will not make any of object files that LINT create change; there might be differences with INET disabled, but hardly anything compiled before without INET anyway. Now the 'obvious' things will give a proper error if compiled without inet - ipx_ip, ipfw, tcp_debug. The only thing that _should_ work (but can't be made to compile reasonably easily) is sppp :-( This commit move struct arpcom from <netinet/if_ether.h> to <net/if_arp.h>.
945 lines
26 KiB
C
945 lines
26 KiB
C
/*
|
|
* Copyright (c) 1996, Javier Martín Rueda (jmrueda@diatel.upm.es)
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice unmodified, this list of conditions, and the following
|
|
* disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $Id: if_ex.c,v 1.9 1997/12/15 20:30:45 eivind Exp $
|
|
*/
|
|
|
|
/*
|
|
* Intel EtherExpress Pro/10, Pro/10+ Ethernet driver
|
|
*
|
|
* Revision history:
|
|
*
|
|
* 30-Oct-1996: first beta version. Inet and BPF supported, but no multicast.
|
|
*/
|
|
|
|
#include "ex.h"
|
|
#if NEX > 0
|
|
#include "bpfilter.h"
|
|
#include "opt_inet.h"
|
|
#include "opt_ipx.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/socket.h>
|
|
|
|
#include <net/ethernet.h>
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
|
|
#ifdef INET
|
|
#include <netinet/in.h>
|
|
#include <netinet/if_ether.h>
|
|
#endif
|
|
|
|
#ifdef IPX
|
|
#include <netipx/ipx.h>
|
|
#include <netipx/ipx_if.h>
|
|
#endif
|
|
|
|
#ifdef NS
|
|
#include <netns/ns.h>
|
|
#include <netns/ns_if.h>
|
|
#endif
|
|
|
|
#if NBPFILTER > 0
|
|
#include <net/bpf.h>
|
|
#endif
|
|
|
|
#include <machine/clock.h>
|
|
|
|
#include <i386/isa/isa_device.h>
|
|
#include <i386/isa/if_exreg.h>
|
|
|
|
#ifdef EXDEBUG
|
|
#define Start_End 1
|
|
#define Rcvd_Pkts 2
|
|
#define Sent_Pkts 4
|
|
#define Status 8
|
|
static int debug_mask = 0;
|
|
static int exintr_count = 0;
|
|
#define DODEBUG(level, action) if (level & debug_mask) action
|
|
#else
|
|
#define DODEBUG(level, action)
|
|
#endif
|
|
|
|
#define Conn_BNC 1
|
|
#define Conn_TPE 2
|
|
#define Conn_AUI 3
|
|
|
|
struct ex_softc {
|
|
struct arpcom arpcom; /* Ethernet common data */
|
|
u_int iobase; /* I/O base address. */
|
|
u_short connector; /* Connector type. */
|
|
u_short irq_no; /* IRQ number. */
|
|
char *irq2ee; /* irq <-> internal representation conversion */
|
|
u_char *ee2irq;
|
|
u_int mem_size; /* Total memory size, in bytes. */
|
|
u_int rx_mem_size; /* Rx memory size (by default, first 3/4 of total memory). */
|
|
u_int rx_lower_limit, rx_upper_limit; /* Lower and upper limits of receive buffer. */
|
|
u_int rx_head; /* Head of receive ring buffer. */
|
|
u_int tx_mem_size; /* Tx memory size (by default, last quarter of total memory). */
|
|
u_int tx_lower_limit, tx_upper_limit; /* Lower and upper limits of transmit buffer. */
|
|
u_int tx_head, tx_tail; /* Head and tail of transmit ring buffer. */
|
|
u_int tx_last; /* Pointer to beginning of last frame in the chain. */
|
|
};
|
|
|
|
static struct ex_softc ex_sc[NEX]; /* XXX would it be better to malloc(3) the memory? */
|
|
|
|
static char irq2eemap[] = { -1, -1, 0, 1, -1, 2, -1, -1, -1, 0, 3, 4, -1, -1, -1, -1 };
|
|
static u_char ee2irqmap[] = { 9, 3, 5, 10, 11, 0, 0, 0 };
|
|
static char plus_irq2eemap[] = { -1, -1, -1, 0, 1, 2, -1, 3, -1, 4, 5, 6, 7, -1, -1, -1 };
|
|
static u_char plus_ee2irqmap[] = { 3, 4, 5, 7, 9, 10, 11, 12 };
|
|
|
|
static int ex_probe __P((struct isa_device *));
|
|
static int ex_attach __P((struct isa_device *));
|
|
static void ex_init __P((void *));
|
|
static void ex_start __P((struct ifnet *));
|
|
static void ex_stop __P((int));
|
|
static int ex_ioctl __P((struct ifnet *, int, caddr_t));
|
|
static void ex_reset __P((int));
|
|
static void ex_watchdog __P((struct ifnet *));
|
|
|
|
static u_short eeprom_read __P((int, int));
|
|
static int look_for_card __P((u_int));
|
|
static void ex_tx_intr __P((int));
|
|
static void ex_rx_intr __P((int));
|
|
|
|
struct isa_driver exdriver = {
|
|
ex_probe,
|
|
ex_attach,
|
|
"ex",
|
|
0
|
|
};
|
|
|
|
static int look_for_card(u_int iobase)
|
|
{
|
|
int count1, count2;
|
|
|
|
/*
|
|
* Check for the i82595 signature, and check that the round robin
|
|
* counter actually advances.
|
|
*/
|
|
if (((count1 = inb(iobase + ID_REG)) & Id_Mask) != Id_Sig)
|
|
return(0);
|
|
count2 = inb(iobase + ID_REG);
|
|
count2 = inb(iobase + ID_REG);
|
|
count2 = inb(iobase + ID_REG);
|
|
return((count2 & Counter_bits) == ((count1 + 0xc0) & Counter_bits));
|
|
}
|
|
|
|
|
|
int ex_probe(struct isa_device *dev)
|
|
{
|
|
int unit = dev->id_unit;
|
|
struct ex_softc *sc = &ex_sc[unit];
|
|
u_int iobase;
|
|
u_short eaddr_tmp;
|
|
int tmp;
|
|
|
|
DODEBUG(Start_End, printf("ex_probe%d: start\n", unit););
|
|
|
|
/*
|
|
* If an I/O address was supplied in the configuration file, probe only
|
|
* that. Otherwise, cycle through the predefined set of possible addresses.
|
|
*/
|
|
if (dev->id_iobase != -1) {
|
|
if (! look_for_card(iobase = dev->id_iobase))
|
|
return(0);
|
|
}
|
|
else {
|
|
for (iobase = 0x200; iobase < 0x3a0; iobase += 0x10)
|
|
if (look_for_card(iobase))
|
|
break;
|
|
if (iobase >= 0x3a0)
|
|
return(0);
|
|
else
|
|
dev->id_iobase = iobase;
|
|
}
|
|
|
|
/*
|
|
* Reset the card.
|
|
*/
|
|
outb(iobase + CMD_REG, Reset_CMD);
|
|
DELAY(400);
|
|
|
|
/*
|
|
* Fill in several fields of the softc structure:
|
|
* - I/O base address.
|
|
* - Hardware Ethernet address.
|
|
* - IRQ number (if not supplied in config file, read it from EEPROM).
|
|
* - Connector type.
|
|
*/
|
|
sc->iobase = iobase;
|
|
eaddr_tmp = eeprom_read(iobase, EE_Eth_Addr_Lo);
|
|
sc->arpcom.ac_enaddr[5] = eaddr_tmp & 0xff;
|
|
sc->arpcom.ac_enaddr[4] = eaddr_tmp >> 8;
|
|
eaddr_tmp = eeprom_read(iobase, EE_Eth_Addr_Mid);
|
|
sc->arpcom.ac_enaddr[3] = eaddr_tmp & 0xff;
|
|
sc->arpcom.ac_enaddr[2] = eaddr_tmp >> 8;
|
|
eaddr_tmp = eeprom_read(iobase, EE_Eth_Addr_Hi);
|
|
sc->arpcom.ac_enaddr[1] = eaddr_tmp & 0xff;
|
|
sc->arpcom.ac_enaddr[0] = eaddr_tmp >> 8;
|
|
tmp = eeprom_read(iobase, EE_IRQ_No) & IRQ_No_Mask;
|
|
|
|
/* work out which set of irq <-> internal tables to use */
|
|
if (sc->arpcom.ac_enaddr[0] == 0x00 &&
|
|
sc->arpcom.ac_enaddr[1] == 0xA0 &&
|
|
sc->arpcom.ac_enaddr[2] == 0xC9) { /* it's a 10+ */
|
|
sc->irq2ee = plus_irq2eemap;
|
|
sc->ee2irq = plus_ee2irqmap;
|
|
} else { /* it's an ordinary 10 */
|
|
sc->irq2ee = irq2eemap;
|
|
sc->ee2irq = ee2irqmap;
|
|
}
|
|
|
|
if (dev->id_irq > 0) {
|
|
if (sc->ee2irq[tmp] != ffs(dev->id_irq) - 1)
|
|
printf("ex%d: WARNING: board's EEPROM is configured for IRQ %d, using %d\n", unit, sc->ee2irq[tmp], ffs(dev->id_irq) - 1);
|
|
sc->irq_no = ffs(dev->id_irq) - 1;
|
|
}
|
|
else {
|
|
sc->irq_no = sc->ee2irq[tmp];
|
|
dev->id_irq = 1 << sc->irq_no;
|
|
}
|
|
if (sc->irq_no == 0) {
|
|
printf("ex%d: invalid IRQ.\n", unit);
|
|
return(0);
|
|
}
|
|
outb(iobase + CMD_REG, Bank2_Sel);
|
|
tmp = inb(iobase + REG3);
|
|
if (tmp & TPE_bit)
|
|
sc->connector = Conn_TPE;
|
|
else if (tmp & BNC_bit)
|
|
sc->connector = Conn_BNC;
|
|
else
|
|
sc->connector = Conn_AUI;
|
|
sc->mem_size = CARD_RAM_SIZE; /* XXX This should be read from the card itself. */
|
|
|
|
outb(iobase + CMD_REG, Bank0_Sel);
|
|
|
|
DODEBUG(Start_End, printf("ex_probe%d: finish\n", unit););
|
|
return(EX_IOSIZE);
|
|
}
|
|
|
|
|
|
int ex_attach(struct isa_device *dev)
|
|
{
|
|
int unit = dev->id_unit;
|
|
struct ex_softc *sc = &ex_sc[unit];
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
|
|
DODEBUG(Start_End, printf("ex_attach%d: start\n", unit););
|
|
|
|
/*
|
|
* Initialize the ifnet structure.
|
|
*/
|
|
ifp->if_softc = sc;
|
|
ifp->if_unit = unit;
|
|
ifp->if_name = "ex";
|
|
ifp->if_init = ex_init;
|
|
ifp->if_output = ether_output;
|
|
ifp->if_start = ex_start;
|
|
ifp->if_ioctl = ex_ioctl;
|
|
ifp->if_watchdog = ex_watchdog;
|
|
ifp->if_mtu = ETHERMTU;
|
|
ifp->if_flags = IFF_SIMPLEX | IFF_BROADCAST /* XXX not done yet. | IFF_MULTICAST */;
|
|
|
|
/*
|
|
* Attach the interface.
|
|
*/
|
|
if_attach(ifp);
|
|
ether_ifattach(ifp);
|
|
|
|
if (sc->arpcom.ac_enaddr[0] == 0x00 &&
|
|
sc->arpcom.ac_enaddr[1] == 0xA0 &&
|
|
sc->arpcom.ac_enaddr[2] == 0xC9) {
|
|
printf("ex%d: Intel EtherExpress Pro/10+, address %6D, connector ", dev->id_unit, sc->arpcom.ac_enaddr, ":");
|
|
} else {
|
|
printf("ex%d: Intel EtherExpress Pro/10, address %6D, connector ", dev->id_unit, sc->arpcom.ac_enaddr, ":");
|
|
}
|
|
switch(sc->connector) {
|
|
case Conn_TPE: printf("TPE\n"); break;
|
|
case Conn_BNC: printf("BNC\n"); break;
|
|
case Conn_AUI: printf("AUI\n"); break;
|
|
default: printf("???\n");
|
|
}
|
|
|
|
/*
|
|
* If BPF is in the kernel, call the attach for it
|
|
*/
|
|
#if NBPFILTER > 0
|
|
bpfattach(ifp, DLT_EN10MB, sizeof(struct ether_header));
|
|
#endif
|
|
DODEBUG(Start_End, printf("ex_attach%d: finish\n", unit););
|
|
return(1);
|
|
}
|
|
|
|
|
|
void ex_init(void *xsc)
|
|
{
|
|
register struct ex_softc *sc = (struct ex_softc *) xsc;
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
int s, i;
|
|
register int iobase = sc->iobase;
|
|
unsigned short temp_reg;
|
|
|
|
DODEBUG(Start_End, printf("ex_init%d: start\n", ifp->if_unit););
|
|
|
|
if (ifp->if_addrhead.tqh_first == NULL)
|
|
return;
|
|
s = splimp();
|
|
sc->arpcom.ac_if.if_timer = 0;
|
|
|
|
/*
|
|
* Load the ethernet address into the card.
|
|
*/
|
|
outb(iobase + CMD_REG, Bank2_Sel);
|
|
temp_reg = inb(iobase + EEPROM_REG);
|
|
if (temp_reg & Trnoff_Enable)
|
|
outb(iobase + EEPROM_REG, temp_reg & ~Trnoff_Enable);
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++)
|
|
outb(iobase + I_ADDR_REG0 + i, sc->arpcom.ac_enaddr[i]);
|
|
/*
|
|
* - Setup transmit chaining and discard bad received frames.
|
|
* - Match broadcast.
|
|
* - Clear test mode.
|
|
* - Set receiving mode.
|
|
* - Set IRQ number.
|
|
*/
|
|
outb(iobase + REG1, inb(iobase + REG1) | Tx_Chn_Int_Md | Tx_Chn_ErStp | Disc_Bad_Fr);
|
|
outb(iobase + REG2, inb(iobase + REG2) | No_SA_Ins | RX_CRC_InMem);
|
|
outb(iobase + REG3, inb(iobase + REG3) & 0x3f /* XXX constants. */ );
|
|
outb(iobase + CMD_REG, Bank1_Sel);
|
|
outb(iobase + INT_NO_REG, (inb(iobase + INT_NO_REG) & 0xf8) | sc->irq2ee[sc->irq_no]);
|
|
|
|
/*
|
|
* Divide the available memory in the card into rcv and xmt buffers.
|
|
* By default, I use the first 3/4 of the memory for the rcv buffer,
|
|
* and the remaining 1/4 of the memory for the xmt buffer.
|
|
*/
|
|
sc->rx_mem_size = sc->mem_size * 3 / 4;
|
|
sc->tx_mem_size = sc->mem_size - sc->rx_mem_size;
|
|
sc->rx_lower_limit = 0x0000;
|
|
sc->rx_upper_limit = sc->rx_mem_size - 2;
|
|
sc->tx_lower_limit = sc->rx_mem_size;
|
|
sc->tx_upper_limit = sc->mem_size - 2;
|
|
outb(iobase + RCV_LOWER_LIMIT_REG, sc->rx_lower_limit >> 8);
|
|
outb(iobase + RCV_UPPER_LIMIT_REG, sc->rx_upper_limit >> 8);
|
|
outb(iobase + XMT_LOWER_LIMIT_REG, sc->tx_lower_limit >> 8);
|
|
outb(iobase + XMT_UPPER_LIMIT_REG, sc->tx_upper_limit >> 8);
|
|
|
|
/*
|
|
* Enable receive and transmit interrupts, and clear any pending int.
|
|
*/
|
|
outb(iobase + REG1, inb(iobase + REG1) | TriST_INT);
|
|
outb(iobase + CMD_REG, Bank0_Sel);
|
|
outb(iobase + MASK_REG, All_Int & ~(Rx_Int | Tx_Int));
|
|
outb(iobase + STATUS_REG, All_Int);
|
|
|
|
/*
|
|
* Initialize receive and transmit ring buffers.
|
|
*/
|
|
outw(iobase + RCV_BAR, sc->rx_lower_limit);
|
|
sc->rx_head = sc->rx_lower_limit;
|
|
outw(iobase + RCV_STOP_REG, sc->rx_upper_limit | 0xfe);
|
|
outw(iobase + XMT_BAR, sc->tx_lower_limit);
|
|
sc->tx_head = sc->tx_tail = sc->tx_lower_limit;
|
|
|
|
ifp->if_flags |= IFF_RUNNING;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
DODEBUG(Status, printf("OIDLE init\n"););
|
|
|
|
/*
|
|
* Final reset of the board, and enable operation.
|
|
*/
|
|
outb(iobase + CMD_REG, Sel_Reset_CMD);
|
|
DELAY(2);
|
|
outb(iobase + CMD_REG, Rcv_Enable_CMD);
|
|
|
|
ex_start(ifp);
|
|
splx(s);
|
|
|
|
DODEBUG(Start_End, printf("ex_init%d: finish\n", ifp->if_unit););
|
|
}
|
|
|
|
|
|
void ex_start(struct ifnet *ifp)
|
|
{
|
|
int unit = ifp->if_unit;
|
|
register struct ex_softc *sc = &ex_sc[unit];
|
|
register int iobase = sc->iobase;
|
|
int i, s, len, data_len, avail, dest, next;
|
|
unsigned char tmp16[2];
|
|
struct mbuf *opkt;
|
|
register struct mbuf *m;
|
|
|
|
DODEBUG(Start_End, printf("ex_start%d: start\n", unit););
|
|
|
|
s = splimp();
|
|
|
|
/*
|
|
* Main loop: send outgoing packets to network card until there are no
|
|
* more packets left, or the card cannot accept any more yet.
|
|
*/
|
|
while (((opkt = ifp->if_snd.ifq_head) != NULL) && ! (ifp->if_flags & IFF_OACTIVE)) {
|
|
|
|
/*
|
|
* Ensure there is enough free transmit buffer space for this packet,
|
|
* including its header. Note: the header cannot wrap around the end of
|
|
* the transmit buffer and must be kept together, so we allow space for
|
|
* twice the length of the header, just in case.
|
|
*/
|
|
for (len = 0, m = opkt; m != NULL; m = m->m_next)
|
|
len += m->m_len;
|
|
data_len = len;
|
|
DODEBUG(Sent_Pkts, printf("1. Sending packet with %d data bytes. ", data_len););
|
|
if (len & 1)
|
|
len += XMT_HEADER_LEN + 1;
|
|
else
|
|
len += XMT_HEADER_LEN;
|
|
if ((i = sc->tx_tail - sc->tx_head) >= 0)
|
|
avail = sc->tx_mem_size - i;
|
|
else
|
|
avail = -i;
|
|
DODEBUG(Sent_Pkts, printf("i=%d, avail=%d\n", i, avail););
|
|
if (avail >= len + XMT_HEADER_LEN) {
|
|
IF_DEQUEUE(&ifp->if_snd, opkt);
|
|
|
|
#ifdef EX_PSA_INTR
|
|
/*
|
|
* Disable rx and tx interrupts, to avoid corruption of the host
|
|
* address register by interrupt service routines. XXX Is this necessary with splimp() enabled?
|
|
*/
|
|
outb(iobase + MASK_REG, All_Int);
|
|
#endif
|
|
|
|
/*
|
|
* Compute the start and end addresses of this frame in the tx buffer.
|
|
*/
|
|
dest = sc->tx_tail;
|
|
next = dest + len;
|
|
if (next > sc->tx_upper_limit) {
|
|
if ((sc->tx_upper_limit + 2 - sc->tx_tail) <= XMT_HEADER_LEN) {
|
|
dest = sc->tx_lower_limit;
|
|
next = dest + len;
|
|
}
|
|
else
|
|
next = sc->tx_lower_limit + next - sc->tx_upper_limit - 2;
|
|
}
|
|
|
|
/*
|
|
* Build the packet frame in the card's ring buffer.
|
|
*/
|
|
DODEBUG(Sent_Pkts, printf("2. dest=%d, next=%d. ", dest, next););
|
|
outw(iobase + HOST_ADDR_REG, dest);
|
|
outw(iobase + IO_PORT_REG, Transmit_CMD);
|
|
outw(iobase + IO_PORT_REG, 0);
|
|
outw(iobase + IO_PORT_REG, next);
|
|
outw(iobase + IO_PORT_REG, data_len);
|
|
|
|
/*
|
|
* Output the packet data to the card. Ensure all transfers are
|
|
* 16-bit wide, even if individual mbufs have odd length.
|
|
*/
|
|
|
|
for (m = opkt, i = 0; m != NULL; m = m->m_next) {
|
|
DODEBUG(Sent_Pkts, printf("[%d]", m->m_len););
|
|
if (i) {
|
|
tmp16[1] = *(mtod(m, caddr_t));
|
|
outsw(iobase + IO_PORT_REG, tmp16, 1);
|
|
}
|
|
outsw(iobase + IO_PORT_REG, mtod(m, caddr_t) + i, (m->m_len - i) / 2);
|
|
if (i = (m->m_len - i) & 1)
|
|
tmp16[0] = *(mtod(m, caddr_t) + m->m_len - 1);
|
|
}
|
|
if (i)
|
|
outsw(iobase + IO_PORT_REG, tmp16, 1);
|
|
|
|
/*
|
|
* If there were other frames chained, update the chain in the last one.
|
|
*/
|
|
if (sc->tx_head != sc->tx_tail) {
|
|
if (sc->tx_tail != dest) {
|
|
outw(iobase + HOST_ADDR_REG, sc->tx_last + XMT_Chain_Point);
|
|
outw(iobase + IO_PORT_REG, dest);
|
|
}
|
|
outw(iobase + HOST_ADDR_REG, sc->tx_last + XMT_Byte_Count);
|
|
i = inw(iobase + IO_PORT_REG);
|
|
outw(iobase + HOST_ADDR_REG, sc->tx_last + XMT_Byte_Count);
|
|
outw(iobase + IO_PORT_REG, i | Ch_bit);
|
|
}
|
|
|
|
/*
|
|
* Resume normal operation of the card:
|
|
* - Make a dummy read to flush the DRAM write pipeline.
|
|
* - Enable receive and transmit interrupts.
|
|
* - Send Transmit or Resume_XMT command, as appropriate.
|
|
*/
|
|
inw(iobase + IO_PORT_REG);
|
|
#ifdef EX_PSA_INTR
|
|
outb(iobase + MASK_REG, All_Int & ~(Rx_Int | Tx_Int));
|
|
#endif
|
|
if (sc->tx_head == sc->tx_tail) {
|
|
outw(iobase + XMT_BAR, dest);
|
|
outb(iobase + CMD_REG, Transmit_CMD);
|
|
sc->tx_head = dest;
|
|
DODEBUG(Sent_Pkts, printf("Transmit\n"););
|
|
}
|
|
else {
|
|
outb(iobase + CMD_REG, Resume_XMT_List_CMD);
|
|
DODEBUG(Sent_Pkts, printf("Resume\n"););
|
|
}
|
|
sc->tx_last = dest;
|
|
sc->tx_tail = next;
|
|
|
|
#if NBPFILTER > 0
|
|
if (ifp->if_bpf != NULL)
|
|
bpf_mtap(ifp, opkt);
|
|
#endif
|
|
ifp->if_timer = 2;
|
|
ifp->if_opackets++;
|
|
m_freem(opkt);
|
|
}
|
|
else {
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
DODEBUG(Status, printf("OACTIVE start\n"););
|
|
}
|
|
}
|
|
|
|
splx(s);
|
|
|
|
DODEBUG(Start_End, printf("ex_start%d: finish\n", unit););
|
|
}
|
|
|
|
|
|
void ex_stop(int unit)
|
|
{
|
|
struct ex_softc *sc = &ex_sc[unit];
|
|
int iobase = sc->iobase;
|
|
|
|
DODEBUG(Start_End, printf("ex_stop%d: start\n", unit););
|
|
|
|
/*
|
|
* Disable card operation:
|
|
* - Disable the interrupt line.
|
|
* - Flush transmission and disable reception.
|
|
* - Mask and clear all interrupts.
|
|
* - Reset the 82595.
|
|
*/
|
|
outb(iobase + CMD_REG, Bank1_Sel);
|
|
outb(iobase + REG1, inb(iobase + REG1) & ~TriST_INT);
|
|
outb(iobase + CMD_REG, Bank0_Sel);
|
|
outb(iobase + CMD_REG, Rcv_Stop);
|
|
sc->tx_head = sc->tx_tail = sc->tx_lower_limit;
|
|
sc->tx_last = 0; /* XXX I think these two lines are not necessary, because ex_init will always be called again to reinit the interface. */
|
|
outb(iobase + MASK_REG, All_Int);
|
|
outb(iobase + STATUS_REG, All_Int);
|
|
outb(iobase + CMD_REG, Reset_CMD);
|
|
DELAY(200);
|
|
|
|
DODEBUG(Start_End, printf("ex_stop%d: finish\n", unit););
|
|
}
|
|
|
|
|
|
void exintr(int unit)
|
|
{
|
|
struct ex_softc *sc = &ex_sc[unit];
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
int iobase = sc->iobase;
|
|
int int_status, send_pkts;
|
|
|
|
DODEBUG(Start_End, printf("exintr%d: start\n", unit););
|
|
|
|
#ifdef EXDEBUG
|
|
if (++exintr_count != 1)
|
|
printf("WARNING: nested interrupt (%d). Mail the author.\n", exintr_count);
|
|
#endif
|
|
|
|
send_pkts = 0;
|
|
while ((int_status = inb(iobase + STATUS_REG)) & (Tx_Int | Rx_Int)) {
|
|
if (int_status & Rx_Int) {
|
|
outb(iobase + STATUS_REG, Rx_Int);
|
|
ex_rx_intr(unit);
|
|
}
|
|
else if (int_status & Tx_Int) {
|
|
outb(iobase + STATUS_REG, Tx_Int);
|
|
ex_tx_intr(unit);
|
|
send_pkts = 1;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If any packet has been transmitted, and there are queued packets to
|
|
* be sent, attempt to send more packets to the network card.
|
|
*/
|
|
|
|
if (send_pkts && (ifp->if_snd.ifq_head != NULL))
|
|
ex_start(ifp);
|
|
|
|
#ifdef EXDEBUG
|
|
exintr_count--;
|
|
#endif
|
|
|
|
DODEBUG(Start_End, printf("exintr%d: finish\n", unit););
|
|
}
|
|
|
|
|
|
void ex_tx_intr(int unit)
|
|
{
|
|
register struct ex_softc *sc = &ex_sc[unit];
|
|
register struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
register int iobase = sc->iobase;
|
|
int tx_status;
|
|
|
|
DODEBUG(Start_End, printf("ex_tx_intr%d: start\n", unit););
|
|
|
|
/*
|
|
* - Cancel the watchdog.
|
|
* For all packets transmitted since last transmit interrupt:
|
|
* - Advance chain pointer to next queued packet.
|
|
* - Update statistics.
|
|
*/
|
|
|
|
ifp->if_timer = 0;
|
|
while (sc->tx_head != sc->tx_tail) {
|
|
outw(iobase + HOST_ADDR_REG, sc->tx_head);
|
|
if (! inw(iobase + IO_PORT_REG) & Done_bit)
|
|
break;
|
|
tx_status = inw(iobase + IO_PORT_REG);
|
|
sc->tx_head = inw(iobase + IO_PORT_REG);
|
|
if (tx_status & TX_OK_bit)
|
|
ifp->if_opackets++;
|
|
else
|
|
ifp->if_oerrors++;
|
|
ifp->if_collisions += tx_status & No_Collisions_bits;
|
|
}
|
|
|
|
/*
|
|
* The card should be ready to accept more packets now.
|
|
*/
|
|
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
DODEBUG(Status, printf("OIDLE tx_intr\n"););
|
|
|
|
DODEBUG(Start_End, printf("ex_tx_intr%d: finish\n", unit););
|
|
}
|
|
|
|
|
|
void ex_rx_intr(int unit)
|
|
{
|
|
register struct ex_softc *sc = &ex_sc[unit];
|
|
register struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
register int iobase = sc->iobase;
|
|
int rx_status, pkt_len, QQQ;
|
|
register struct mbuf *m, *ipkt;
|
|
struct ether_header *eh;
|
|
|
|
DODEBUG(Start_End, printf("ex_rx_intr%d: start\n", unit););
|
|
|
|
/*
|
|
* For all packets received since last receive interrupt:
|
|
* - If packet ok, read it into a new mbuf and queue it to interface,
|
|
* updating statistics.
|
|
* - If packet bad, just discard it, and update statistics.
|
|
* Finally, advance receive stop limit in card's memory to new location.
|
|
*/
|
|
|
|
outw(iobase + HOST_ADDR_REG, sc->rx_head);
|
|
while (inw(iobase + IO_PORT_REG) == RCV_Done) {
|
|
rx_status = inw(iobase + IO_PORT_REG);
|
|
sc->rx_head = inw(iobase + IO_PORT_REG);
|
|
QQQ = pkt_len = inw(iobase + IO_PORT_REG);
|
|
if (rx_status & RCV_OK_bit) {
|
|
MGETHDR(m, M_DONTWAIT, MT_DATA);
|
|
ipkt = m;
|
|
if (ipkt == NULL)
|
|
ifp->if_iqdrops++;
|
|
else {
|
|
ipkt->m_pkthdr.rcvif = ifp;
|
|
ipkt->m_pkthdr.len = pkt_len;
|
|
ipkt->m_len = MHLEN;
|
|
while (pkt_len > 0) {
|
|
if (pkt_len > MINCLSIZE) {
|
|
MCLGET(m, M_DONTWAIT);
|
|
if (m->m_flags & M_EXT)
|
|
m->m_len = MCLBYTES;
|
|
else {
|
|
m_freem(ipkt);
|
|
ifp->if_iqdrops++;
|
|
goto rx_another;
|
|
}
|
|
}
|
|
m->m_len = min(m->m_len, pkt_len);
|
|
|
|
/*
|
|
* NOTE: I'm assuming that all mbufs allocated are of even length,
|
|
* except for the last one in an odd-length packet.
|
|
*/
|
|
insw(iobase + IO_PORT_REG, mtod(m, caddr_t), m->m_len / 2);
|
|
if (m->m_len & 1)
|
|
*(mtod(m, caddr_t) + m->m_len - 1) = inb(iobase + IO_PORT_REG);
|
|
pkt_len -= m->m_len;
|
|
if (pkt_len > 0) {
|
|
MGET(m->m_next, M_DONTWAIT, MT_DATA);
|
|
if (m->m_next == NULL) {
|
|
m_freem(ipkt);
|
|
ifp->if_iqdrops++;
|
|
goto rx_another;
|
|
}
|
|
m = m->m_next;
|
|
m->m_len = MLEN;
|
|
}
|
|
}
|
|
eh = mtod(ipkt, struct ether_header *);
|
|
#ifdef EXDEBUG
|
|
if (debug_mask & Rcvd_Pkts) {
|
|
if ((eh->ether_dhost[5] != 0xff) || (eh->ether_dhost[0] != 0xff)) {
|
|
printf("Receive packet with %d data bytes: %6D -> ", QQQ, eh->ether_shost, ":");
|
|
printf("%6D\n", eh->ether_dhost, ":");
|
|
} /* QQQ */
|
|
}
|
|
#endif
|
|
#if NBPFILTER > 0
|
|
if (ifp->if_bpf != NULL) {
|
|
bpf_mtap(ifp, ipkt);
|
|
|
|
/*
|
|
* Note that the interface cannot be in promiscuous mode if there are
|
|
* no BPF listeners. And if we are in promiscuous mode, we have to
|
|
* check if this packet is really ours.
|
|
*/
|
|
if ((ifp->if_flags & IFF_PROMISC) &&
|
|
(eh->ether_dhost[0] & 1) == 0 &&
|
|
bcmp(eh->ether_dhost, sc->arpcom.ac_enaddr, sizeof(eh->ether_dhost)) != 0 &&
|
|
bcmp(eh->ether_dhost, etherbroadcastaddr, sizeof(eh->ether_dhost)) != 0) {
|
|
m_freem(ipkt);
|
|
goto rx_another;
|
|
}
|
|
}
|
|
#endif
|
|
m_adj(ipkt, sizeof(struct ether_header));
|
|
ether_input(ifp, eh, ipkt);
|
|
ifp->if_ipackets++;
|
|
}
|
|
}
|
|
else
|
|
ifp->if_ierrors++;
|
|
outw(iobase + HOST_ADDR_REG, sc->rx_head);
|
|
rx_another: ;
|
|
}
|
|
if (sc->rx_head < sc->rx_lower_limit + 2)
|
|
outw(iobase + RCV_STOP_REG, sc->rx_upper_limit);
|
|
else
|
|
outw(iobase + RCV_STOP_REG, sc->rx_head - 2);
|
|
|
|
DODEBUG(Start_End, printf("ex_rx_intr%d: finish\n", unit););
|
|
}
|
|
|
|
|
|
int ex_ioctl(register struct ifnet *ifp, int cmd, caddr_t data)
|
|
{
|
|
register struct ifaddr *ifa = (struct ifaddr *) data;
|
|
struct ex_softc *sc = &ex_sc[ifp->if_unit];
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
int s, error = 0;
|
|
|
|
DODEBUG(Start_End, printf("ex_ioctl%d: start ", ifp->if_unit););
|
|
|
|
s = splimp();
|
|
|
|
switch(cmd) {
|
|
case SIOCSIFADDR:
|
|
DODEBUG(Start_End, printf("SIOCSIFADDR"););
|
|
ifp->if_flags |= IFF_UP;
|
|
|
|
switch(ifa->ifa_addr->sa_family) {
|
|
#ifdef INET
|
|
case AF_INET:
|
|
ex_init(sc);
|
|
arp_ifinit((struct arpcom *) ifp, ifa);
|
|
break;
|
|
#endif
|
|
#ifdef IPX_NOTYET
|
|
case AF_IPX:
|
|
{
|
|
register struct ipx_addr *ina = &(IA_SIPX(ifa)->sipx_addr);
|
|
|
|
if (ipx_nullhost(*ina))
|
|
ina->x_host = *(union ipx_host *) (sc->arpcom.ac_enaddr);
|
|
else {
|
|
ifp->if_flags &= ~IFF_RUNNING;
|
|
bcopy((caddr_t) ina->x_host.c_host, (caddr_t) sc->arpcom.ac_enaddr, sizeof(sc->arpcom.ac_enaddr));
|
|
}
|
|
ex_init(sc);
|
|
break;
|
|
}
|
|
#endif
|
|
#ifdef NS
|
|
case AF_NS:
|
|
{
|
|
register struct ns_addr *ina = &(IA_SNS(ifa)->sns_addr);
|
|
|
|
if (ns_nullhost(*ina))
|
|
ina->x_host = *(union ns_host *) (sc->arpcom.ac_enaddr);
|
|
else {
|
|
ifp->if_flags &= ~IFF_RUNNING;
|
|
bcopy((caddr_t) ina->x_host.c_host, (caddr_t) sc->arpcom.ac_enaddr, sizeof(sc->arpcom.ac_enaddr));
|
|
}
|
|
ex_init(sc);
|
|
break;
|
|
}
|
|
#endif
|
|
default:
|
|
ex_init(sc);
|
|
break;
|
|
}
|
|
break;
|
|
case SIOCGIFADDR:
|
|
{
|
|
struct sockaddr *sa;
|
|
|
|
DODEBUG(Start_End, printf("SIOCGIFADDR"););
|
|
sa = (struct sockaddr *) &ifr->ifr_data;
|
|
bcopy((caddr_t) sc->arpcom.ac_enaddr, (caddr_t) sa->sa_data, ETHER_ADDR_LEN);
|
|
}
|
|
break;
|
|
case SIOCSIFFLAGS:
|
|
DODEBUG(Start_End, printf("SIOCSIFFLAGS"););
|
|
if ((ifp->if_flags & IFF_UP) == 0 && ifp->if_flags & IFF_RUNNING) {
|
|
ifp->if_flags &= ~IFF_RUNNING;
|
|
ex_stop(ifp->if_unit);
|
|
}
|
|
else
|
|
ex_init(sc);
|
|
break;
|
|
#ifdef NODEF
|
|
case SIOCGHWADDR:
|
|
DODEBUG(Start_End, printf("SIOCGHWADDR"););
|
|
bcopy((caddr_t) sc->sc_addr, (caddr_t) &ifr->ifr_data, sizeof(sc->sc_addr));
|
|
break;
|
|
#endif
|
|
case SIOCSIFMTU:
|
|
DODEBUG(Start_End, printf("SIOCSIFMTU"););
|
|
if (ifr->ifr_mtu > ETHERMTU)
|
|
error = EINVAL;
|
|
else
|
|
ifp->if_mtu = ifr->ifr_mtu;
|
|
break;
|
|
case SIOCADDMULTI:
|
|
DODEBUG(Start_End, printf("SIOCADDMULTI"););
|
|
case SIOCDELMULTI:
|
|
DODEBUG(Start_End, printf("SIOCDELMULTI"););
|
|
/* XXX Support not done yet. */
|
|
error = EINVAL;
|
|
break;
|
|
default:
|
|
DODEBUG(Start_End, printf("unknown"););
|
|
error = EINVAL;
|
|
}
|
|
|
|
splx(s);
|
|
|
|
DODEBUG(Start_End, printf("\nex_ioctl%d: finish\n", ifp->if_unit););
|
|
return(error);
|
|
}
|
|
|
|
|
|
void ex_reset(int unit)
|
|
{
|
|
struct ex_softc *sc = &ex_sc[unit];
|
|
int s;
|
|
|
|
DODEBUG(Start_End, printf("ex_reset%d: start\n", unit););
|
|
|
|
s = splimp();
|
|
|
|
ex_stop(unit);
|
|
ex_init(sc);
|
|
|
|
splx(s);
|
|
|
|
DODEBUG(Start_End, printf("ex_reset%d: finish\n", unit););
|
|
}
|
|
|
|
|
|
void ex_watchdog(struct ifnet *ifp)
|
|
{
|
|
|
|
DODEBUG(Start_End, printf("ex_watchdog%d: start\n", ifp->if_unit););
|
|
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
DODEBUG(Status, printf("OIDLE watchdog\n"););
|
|
ifp->if_oerrors++;
|
|
ex_reset(ifp->if_unit);
|
|
ex_start(ifp);
|
|
|
|
DODEBUG(Start_End, printf("ex_watchdog%d: finish\n", ifp->if_unit););
|
|
}
|
|
|
|
|
|
static u_short eeprom_read(int iobase, int location)
|
|
{
|
|
int i;
|
|
u_short data = 0;
|
|
int ee_addr;
|
|
int read_cmd = location | EE_READ_CMD;
|
|
short ctrl_val = EECS;
|
|
|
|
ee_addr = iobase + EEPROM_REG;
|
|
outb(iobase + CMD_REG, Bank2_Sel);
|
|
outb(ee_addr, EECS);
|
|
for (i = 8; i >= 0; i--) {
|
|
short outval = (read_cmd & (1 << i)) ? ctrl_val | EEDI : ctrl_val;
|
|
outb(ee_addr, outval);
|
|
outb(ee_addr, outval | EESK);
|
|
DELAY(3);
|
|
outb(ee_addr, outval);
|
|
DELAY(2);
|
|
}
|
|
outb(ee_addr, ctrl_val);
|
|
|
|
for (i = 16; i > 0; i--) {
|
|
outb(ee_addr, ctrl_val | EESK);
|
|
DELAY(3);
|
|
data = (data << 1) | ((inb(ee_addr) & EEDO) ? 1 : 0);
|
|
outb(ee_addr, ctrl_val);
|
|
DELAY(2);
|
|
}
|
|
|
|
ctrl_val &= ~EECS;
|
|
outb(ee_addr, ctrl_val | EESK);
|
|
DELAY(3);
|
|
outb(ee_addr, ctrl_val);
|
|
DELAY(2);
|
|
outb(iobase + CMD_REG, Bank0_Sel);
|
|
return(data);
|
|
}
|
|
|
|
#endif /* NEX > 0 */
|