ef137fd32f
This provides support for the Adaptec SCSI RAID controller family, as well as the DPT SmartRAID V and VI families. The driver will be maintained by Mark and Adaptec, and any changes should be referred to the MAINTAINER.
4374 lines
172 KiB
C
4374 lines
172 KiB
C
/* $FreeBSD$ */
|
|
/*
|
|
* Copyright (c) 1996-2000 Distributed Processing Technology Corporation
|
|
* Copyright (c) 2000 Adaptec Corporation
|
|
* All rights reserved.
|
|
*
|
|
* TERMS AND CONDITIONS OF USE
|
|
*
|
|
* Redistribution and use in source form, with or without modification, are
|
|
* permitted provided that redistributions of source code must retain the
|
|
* above copyright notice, this list of conditions and the following disclaimer.
|
|
*
|
|
* This software is provided `as is' by Adaptec and any express or implied
|
|
* warranties, including, but not limited to, the implied warranties of
|
|
* merchantability and fitness for a particular purpose, are disclaimed. In no
|
|
* event shall Adaptec be liable for any direct, indirect, incidental, special,
|
|
* exemplary or consequential damages (including, but not limited to,
|
|
* procurement of substitute goods or services; loss of use, data, or profits;
|
|
* or business interruptions) however caused and on any theory of liability,
|
|
* whether in contract, strict liability, or tort (including negligence or
|
|
* otherwise) arising in any way out of the use of this driver software, even
|
|
* if advised of the possibility of such damage.
|
|
*
|
|
* SCSI I2O host adapter driver
|
|
*
|
|
* V1.03 2000/07/12 Mark_Salyzyn@adaptec.com
|
|
* - The controller is not actually an ASR (Adaptec SCSI RAID)
|
|
* series that is visible, it's more of an internal code name.
|
|
* remove any visible references within reason for now.
|
|
* - bus_ptr->LUN was not correctly zeroed when initially
|
|
* allocated causing a possible panic of the operating system
|
|
* during boot.
|
|
* V1.02 2000/06/26 Mark_Salyzyn@adaptec.com
|
|
* - Code always fails for ASR_getTid affecting performance.
|
|
* - initiated a set of changes that resulted from a formal
|
|
* code inspection by Mark_Salyzyn@adaptec.com,
|
|
* George_Dake@adaptec.com, Jeff_Zeak@adaptec.com,
|
|
* Martin_Wilson@adaptec.com and Vincent_Trandoan@adaptec.com.
|
|
* Their findings were focussed on the LCT & TID handler, and
|
|
* all resulting changes were to improve code readability,
|
|
* consistency or have a positive effect on performance.
|
|
* V1.01 2000/06/14 Mark_Salyzyn@adaptec.com
|
|
* - Passthrough returned an incorrect error.
|
|
* - Passthrough did not migrate the intrinsic scsi layer wakeup
|
|
* on command completion.
|
|
* - generate control device nodes using make_dev and delete_dev.
|
|
* - Performance affected by TID caching reallocing.
|
|
* - Made suggested changes by Justin_Gibbs@adaptec.com
|
|
* - use splcam instead of splbio.
|
|
* - use cam_imask instead of bio_imask.
|
|
* - use u_int8_t instead of u_char.
|
|
* - use u_int16_t instead of u_short.
|
|
* - use u_int32_t instead of u_long where appropriate.
|
|
* - use 64 bit context handler instead of 32 bit.
|
|
* - create_ccb should only allocate the worst case
|
|
* requirements for the driver since CAM may evolve
|
|
* making union ccb much larger than needed here.
|
|
* renamed create_ccb to asr_alloc_ccb.
|
|
* - go nutz justifying all debug prints as macros
|
|
* defined at the top and remove unsightly ifdefs.
|
|
* - INLINE STATIC viewed as confusing. Historically
|
|
* utilized to affect code performance and debug
|
|
* issues in OS, Compiler or OEM specific situations.
|
|
* V1.00 2000/05/31 Mark_Salyzyn@adaptec.com
|
|
* - Ported from FreeBSD 2.2.X DPT I2O driver.
|
|
* changed struct scsi_xfer to union ccb/struct ccb_hdr
|
|
* changed variable name xs to ccb
|
|
* changed struct scsi_link to struct cam_path
|
|
* changed struct scsibus_data to struct cam_sim
|
|
* stopped using fordriver for holding on to the TID
|
|
* use proprietary packet creation instead of scsi_inquire
|
|
* CAM layer sends synchronize commands.
|
|
*/
|
|
|
|
#define ASR_VERSION 1
|
|
#define ASR_REVISION '0'
|
|
#define ASR_SUBREVISION '3'
|
|
#define ASR_MONTH 7
|
|
#define ASR_DAY 12
|
|
#define ASR_YEAR 2000 - 1980
|
|
|
|
/*
|
|
* Debug macros to resude the unsightly ifdefs
|
|
*/
|
|
#if (defined(DEBUG_ASR) || defined(DEBUG_ASR_USR_CMD) || defined(DEBUG_ASR_CMD))
|
|
# define debug_asr_message(message) \
|
|
{ \
|
|
u_int32_t * pointer = (u_int32_t *)message; \
|
|
u_int32_t length = I2O_MESSAGE_FRAME_getMessageSize(message);\
|
|
u_int32_t counter = 0; \
|
|
\
|
|
while (length--) { \
|
|
printf ("%08lx%c", (u_long)*(pointer++), \
|
|
(((++counter & 7) == 0) || (length == 0)) \
|
|
? '\n' \
|
|
: ' '); \
|
|
} \
|
|
}
|
|
#endif /* DEBUG_ASR || DEBUG_ASR_USR_CMD || DEBUG_ASR_CMD */
|
|
|
|
#if (defined(DEBUG_ASR))
|
|
/* Breaks on none STDC based compilers :-( */
|
|
# define debug_asr_printf(fmt,args...) printf(fmt, ##args)
|
|
# define debug_asr_dump_message(message) debug_asr_message(message)
|
|
# define debug_asr_print_path(ccb) xpt_print_path(ccb->ccb_h.path);
|
|
/* None fatal version of the ASSERT macro */
|
|
# if (defined(__STDC__))
|
|
# define ASSERT(phrase) if(!(phrase))printf(#phrase " at line %d file %s\n",__LINE__,__FILE__)
|
|
# else
|
|
# define ASSERT(phrase) if(!(phrase))printf("phrase" " at line %d file %s\n",__LINE__,__FILE__)
|
|
# endif
|
|
#else /* DEBUG_ASR */
|
|
# define debug_asr_printf(fmt,args...)
|
|
# define debug_asr_dump_message(message)
|
|
# define debug_asr_print_path(ccb)
|
|
# define ASSERT(x)
|
|
#endif /* DEBUG_ASR */
|
|
|
|
/*
|
|
* If DEBUG_ASR_CMD is defined:
|
|
* 0 - Display incoming SCSI commands
|
|
* 1 - add in a quick character before queueing.
|
|
* 2 - add in outgoing message frames.
|
|
*/
|
|
#if (defined(DEBUG_ASR_CMD))
|
|
# define debug_asr_cmd_printf(fmt,args...) printf(fmt,##args)
|
|
# define debug_asr_dump_ccb(ccb) \
|
|
{ \
|
|
u_int8_t * cp = (unsigned char *)&(ccb->csio.cdb_io); \
|
|
int len = ccb->csio.cdb_len; \
|
|
\
|
|
while (len) { \
|
|
debug_asr_cmd_printf (" %02x", *(cp++)); \
|
|
--len; \
|
|
} \
|
|
}
|
|
# if (DEBUG_ASR_CMD > 0)
|
|
# define debug_asr_cmd1_printf debug_asr_cmd_printf
|
|
# else
|
|
# define debug_asr_cmd1_printf(fmt,args...)
|
|
# endif
|
|
# if (DEBUG_ASR_CMD > 1)
|
|
# define debug_asr_cmd2_printf debug_asr_cmd_printf
|
|
# define debug_asr_cmd2_dump_message(message) debug_asr_message(message)
|
|
# else
|
|
# define debug_asr_cmd2_printf(fmt,args...)
|
|
# define debug_asr_cmd2_dump_message(message)
|
|
# endif
|
|
#else /* DEBUG_ASR_CMD */
|
|
# define debug_asr_cmd_printf(fmt,args...)
|
|
# define debug_asr_cmd_dump_ccb(ccb)
|
|
# define debug_asr_cmd1_printf(fmt,args...)
|
|
# define debug_asr_cmd2_printf(fmt,args...)
|
|
# define debug_asr_cmd2_dump_message(message)
|
|
#endif /* DEBUG_ASR_CMD */
|
|
|
|
#if (defined(DEBUG_ASR_USR_CMD))
|
|
# define debug_usr_cmd_printf(fmt,args...) printf(fmt,##args)
|
|
# define debug_usr_cmd_dump_message(message) debug_usr_message(message)
|
|
#else /* DEBUG_ASR_USR_CMD */
|
|
# define debug_usr_cmd_printf(fmt,args...)
|
|
# define debug_usr_cmd_dump_message(message)
|
|
#endif /* DEBUG_ASR_USR_CMD */
|
|
|
|
#define dsDescription_size 46 /* Snug as a bug in a rug */
|
|
#include "dev/asr/dptsig.h"
|
|
|
|
static dpt_sig_S ASR_sig = {
|
|
{ 'd', 'P', 't', 'S', 'i', 'G'}, SIG_VERSION, PROC_INTEL,
|
|
PROC_386 | PROC_486 | PROC_PENTIUM | PROC_SEXIUM, FT_HBADRVR, 0,
|
|
OEM_DPT, OS_FREE_BSD, CAP_ABOVE16MB, DEV_ALL,
|
|
ADF_ALL_SC5,
|
|
0, 0, ASR_VERSION, ASR_REVISION, ASR_SUBREVISION,
|
|
ASR_MONTH, ASR_DAY, ASR_YEAR,
|
|
/* 01234567890123456789012345678901234567890123456789 < 50 chars */
|
|
"Adaptec FreeBSD 4.0.0 Unix SCSI I2O HBA Driver"
|
|
/* ^^^^^ asr_attach alters these to match OS */
|
|
};
|
|
|
|
#include <sys/param.h> /* TRUE=1 and FALSE=0 defined here */
|
|
#include <sys/kernel.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/disklabel.h>
|
|
#include <sys/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/stat.h>
|
|
|
|
#include <cam/cam.h>
|
|
#include <cam/cam_ccb.h>
|
|
#include <cam/cam_sim.h>
|
|
#include <cam/cam_xpt_sim.h>
|
|
#include <cam/cam_xpt_periph.h>
|
|
|
|
#include <cam/scsi/scsi_all.h>
|
|
#include <cam/scsi/scsi_message.h>
|
|
|
|
#include <vm/vm.h>
|
|
#include <vm/pmap.h>
|
|
#include <machine/cputypes.h>
|
|
#include <machine/clock.h>
|
|
#include <i386/include/vmparam.h>
|
|
|
|
#include <pci/pcivar.h>
|
|
#include <pci/pcireg.h>
|
|
|
|
#define STATIC static
|
|
#define INLINE
|
|
|
|
#if (defined(DEBUG_ASR) && (DEBUG_ASR > 0))
|
|
# undef STATIC
|
|
# define STATIC
|
|
# undef INLINE
|
|
# define INLINE
|
|
#endif
|
|
#define IN
|
|
#define OUT
|
|
#define INOUT
|
|
|
|
#define osdSwap4(x) ((u_long)ntohl((u_long)(x)))
|
|
#define KVTOPHYS(x) vtophys(x)
|
|
#include "dev/asr/dptalign.h"
|
|
#include "dev/asr/i2oexec.h"
|
|
#include "dev/asr/i2obscsi.h"
|
|
#include "dev/asr/i2odpt.h"
|
|
#include "dev/asr/i2oadptr.h"
|
|
#include "opt_asr.h"
|
|
|
|
#include "dev/asr/sys_info.h"
|
|
|
|
/* Configuration Definitions */
|
|
|
|
#define SG_SIZE 58 /* Scatter Gather list Size */
|
|
#define MAX_TARGET_ID 126 /* Maximum Target ID supported */
|
|
#define MAX_LUN 255 /* Maximum LUN Supported */
|
|
#define MAX_CHANNEL 7 /* Maximum Channel # Supported by driver */
|
|
#define MAX_INBOUND 2000 /* Max CCBs, Also Max Queue Size */
|
|
#define MAX_OUTBOUND 256 /* Maximum outbound frames/adapter */
|
|
#define MAX_INBOUND_SIZE 512 /* Maximum inbound frame size */
|
|
#define MAX_MAP 4194304L /* Maximum mapping size of IOP */
|
|
|
|
/**************************************************************************
|
|
** ASR Host Adapter structure - One Structure For Each Host Adapter That **
|
|
** Is Configured Into The System. The Structure Supplies Configuration **
|
|
** Information, Status Info, Queue Info And An Active CCB List Pointer. **
|
|
***************************************************************************/
|
|
|
|
/* I2O register set */
|
|
typedef struct {
|
|
U8 Address[0x30];
|
|
volatile U32 Status;
|
|
volatile U32 Mask;
|
|
# define Mask_InterruptsDisabled 0x08
|
|
U32 x[2];
|
|
volatile U32 ToFIFO; /* In Bound FIFO */
|
|
volatile U32 FromFIFO; /* Out Bound FIFO */
|
|
} i2oRegs_t;
|
|
|
|
/*
|
|
* A MIX of performance and space considerations for TID lookups
|
|
*/
|
|
typedef u_int16_t tid_t;
|
|
|
|
typedef struct {
|
|
u_int32_t size; /* up to MAX_LUN */
|
|
tid_t TID[1];
|
|
} lun2tid_t;
|
|
|
|
typedef struct {
|
|
u_int32_t size; /* up to MAX_TARGET */
|
|
lun2tid_t * LUN[1];
|
|
} target2lun_t;
|
|
|
|
/*
|
|
* To ensure that we only allocate and use the worst case ccb here, lets
|
|
* make our own local ccb union. If asr_alloc_ccb is utilized for another
|
|
* ccb type, ensure that you add the additional structures into our local
|
|
* ccb union. To ensure strict type checking, we will utilize the local
|
|
* ccb definition wherever possible.
|
|
*/
|
|
union asr_ccb {
|
|
struct ccb_hdr ccb_h; /* For convenience */
|
|
struct ccb_scsiio csio;
|
|
struct ccb_setasync csa;
|
|
};
|
|
|
|
typedef struct Asr_softc {
|
|
u_int16_t ha_irq;
|
|
void * ha_Base; /* base port for each board */
|
|
u_int8_t * volatile ha_blinkLED;
|
|
i2oRegs_t * ha_Virt; /* Base address of adapter */
|
|
I2O_IOP_ENTRY ha_SystemTable;
|
|
LIST_HEAD(,ccb_hdr) ha_ccb; /* ccbs in use */
|
|
struct cam_path * ha_path[MAX_CHANNEL+1];
|
|
struct cam_sim * ha_sim[MAX_CHANNEL+1];
|
|
#if __FreeBSD_version >= 400000
|
|
struct resource * ha_mem_res;
|
|
struct resource * ha_irq_res;
|
|
void * ha_intr;
|
|
#endif
|
|
u_int8_t ha_adapter_target[MAX_CHANNEL+1];
|
|
PI2O_LCT ha_LCT; /* Complete list of devices */
|
|
# define le_type IdentityTag[0]
|
|
# define I2O_BSA 0x20
|
|
# define I2O_FCA 0x40
|
|
# define I2O_SCSI 0x00
|
|
# define I2O_PORT 0x80
|
|
# define I2O_UNKNOWN 0x7F
|
|
# define le_bus IdentityTag[1]
|
|
# define le_target IdentityTag[2]
|
|
# define le_lun IdentityTag[3]
|
|
target2lun_t * ha_targets[MAX_CHANNEL+1];
|
|
PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME ha_Msgs;
|
|
u_long ha_Msgs_Phys;
|
|
u_int16_t ha_Msgs_Count;
|
|
|
|
/* Configuration information */
|
|
/* The target id maximums we take */
|
|
u_int8_t ha_MaxBus; /* Maximum bus */
|
|
u_int8_t ha_MaxId; /* Maximum target ID */
|
|
u_int8_t ha_MaxLun; /* Maximum target LUN */
|
|
u_int8_t ha_SgSize; /* Max SG elements */
|
|
u_int8_t ha_pciBusNum;
|
|
u_int8_t ha_pciDeviceNum;
|
|
u_int16_t ha_QueueSize; /* Max outstanding commands */
|
|
|
|
/* Links into other parents and HBAs */
|
|
struct Asr_softc * ha_next; /* HBA list */
|
|
|
|
#ifdef ASR_MEASURE_PERFORMANCE
|
|
#define MAX_TIMEQ_SIZE 256 // assumes MAX 256 scsi commands sent
|
|
asr_perf_t ha_performance;
|
|
u_int32_t ha_submitted_ccbs_count;
|
|
|
|
// Queueing macros for a circular queue
|
|
#define TIMEQ_FREE_LIST_EMPTY(head, tail) (-1 == (head) && -1 == (tail))
|
|
#define TIMEQ_FREE_LIST_FULL(head, tail) ((((tail) + 1) % MAX_TIMEQ_SIZE) == (head))
|
|
#define ENQ_TIMEQ_FREE_LIST(item, Q, head, tail) \
|
|
if (!TIMEQ_FREE_LIST_FULL((head), (tail))) { \
|
|
if TIMEQ_FREE_LIST_EMPTY((head),(tail)) { \
|
|
(head) = (tail) = 0; \
|
|
} \
|
|
else (tail) = ((tail) + 1) % MAX_TIMEQ_SIZE; \
|
|
Q[(tail)] = (item); \
|
|
} \
|
|
else { \
|
|
debug_asr_printf("asr: Enqueueing when TimeQ Free List is full... This should not happen!\n"); \
|
|
}
|
|
#define DEQ_TIMEQ_FREE_LIST(item, Q, head, tail) \
|
|
if (!TIMEQ_FREE_LIST_EMPTY((head), (tail))) { \
|
|
item = Q[(head)]; \
|
|
if ((head) == (tail)) { (head) = (tail) = -1; } \
|
|
else (head) = ((head) + 1) % MAX_TIMEQ_SIZE; \
|
|
} \
|
|
else { \
|
|
(item) = -1; \
|
|
debug_asr_printf("asr: Dequeueing when TimeQ Free List is empty... This should not happen!\n"); \
|
|
}
|
|
|
|
// Circular queue of time stamps
|
|
struct timeval ha_timeQ[MAX_TIMEQ_SIZE];
|
|
u_int32_t ha_timeQFreeList[MAX_TIMEQ_SIZE];
|
|
int ha_timeQFreeHead;
|
|
int ha_timeQFreeTail;
|
|
#endif
|
|
} Asr_softc_t;
|
|
|
|
STATIC Asr_softc_t * Asr_softc;
|
|
|
|
/*
|
|
* Prototypes of the routines we have in this object.
|
|
*/
|
|
|
|
/* Externally callable routines */
|
|
#if __FreeBSD_version >= 400000
|
|
#define PROBE_ARGS IN device_t tag
|
|
#define PROBE_RET int
|
|
#define PROBE_SET() u_long id = (pci_get_device(tag)<<16)|pci_get_vendor(tag)
|
|
#define PROBE_RETURN(retval) if(retval){device_set_desc(tag,retval);return(0);}else{return(ENXIO);}
|
|
#define ATTACH_ARGS IN device_t tag
|
|
#define ATTACH_RET int
|
|
#define ATTACH_SET() int unit = device_get_unit(tag)
|
|
#define ATTACH_RETURN(retval) return(retval)
|
|
#else
|
|
#define PROBE_ARGS IN pcici_t tag, IN pcidi_t id
|
|
#define PROBE_RET const char *
|
|
#define PROBE_SET()
|
|
#define PROBE_RETURN(retval) return(retval)
|
|
#define ATTACH_ARGS IN pcici_t tag, IN int unit
|
|
#define ATTACH_RET void
|
|
#define ATTACH_SET()
|
|
#define ATTACH_RETURN(retval) return
|
|
#endif
|
|
/* I2O HDM interface */
|
|
STATIC PROBE_RET asr_probe __P((PROBE_ARGS));
|
|
STATIC ATTACH_RET asr_attach __P((ATTACH_ARGS));
|
|
/* DOMINO placeholder */
|
|
STATIC PROBE_RET domino_probe __P((PROBE_ARGS));
|
|
STATIC ATTACH_RET domino_attach __P((ATTACH_ARGS));
|
|
/* MODE0 adapter placeholder */
|
|
STATIC PROBE_RET mode0_probe __P((PROBE_ARGS));
|
|
STATIC ATTACH_RET mode0_attach __P((ATTACH_ARGS));
|
|
|
|
STATIC Asr_softc_t * ASR_get_sc __P((
|
|
IN dev_t dev));
|
|
STATIC int asr_ioctl __P((
|
|
IN dev_t dev,
|
|
IN u_long cmd,
|
|
INOUT caddr_t data,
|
|
int flag,
|
|
struct proc * proc));
|
|
STATIC int asr_open __P((
|
|
IN dev_t dev,
|
|
int32_t flags,
|
|
int32_t ifmt,
|
|
IN struct proc * proc));
|
|
STATIC int asr_close __P((
|
|
dev_t dev,
|
|
int flags,
|
|
int ifmt,
|
|
struct proc * proc));
|
|
STATIC int asr_intr __P((
|
|
IN Asr_softc_t * sc));
|
|
STATIC void asr_timeout __P((
|
|
INOUT void * arg));
|
|
STATIC int ASR_init __P((
|
|
IN Asr_softc_t * sc));
|
|
STATIC INLINE int ASR_acquireLct __P((
|
|
INOUT Asr_softc_t * sc));
|
|
STATIC INLINE int ASR_acquireHrt __P((
|
|
INOUT Asr_softc_t * sc));
|
|
STATIC void asr_action __P((
|
|
IN struct cam_sim * sim,
|
|
IN union ccb * ccb));
|
|
STATIC void asr_async __P((
|
|
void * callback_arg,
|
|
u_int32_t code,
|
|
struct cam_path * path,
|
|
void * arg));
|
|
STATIC void asr_poll __P((
|
|
IN struct cam_sim * sim));
|
|
|
|
/*
|
|
* Here is the auto-probe structure used to nest our tests appropriately
|
|
* during the startup phase of the operating system.
|
|
*/
|
|
#if __FreeBSD_version >= 400000
|
|
STATIC device_method_t asr_methods[] = {
|
|
DEVMETHOD(device_probe, asr_probe),
|
|
DEVMETHOD(device_attach, asr_attach),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
STATIC driver_t asr_driver = {
|
|
"asr",
|
|
asr_methods,
|
|
sizeof(Asr_softc_t)
|
|
};
|
|
|
|
STATIC devclass_t asr_devclass;
|
|
|
|
DRIVER_MODULE(asr, pci, asr_driver, asr_devclass, 0, 0);
|
|
|
|
STATIC device_method_t domino_methods[] = {
|
|
DEVMETHOD(device_probe, domino_probe),
|
|
DEVMETHOD(device_attach, domino_attach),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
STATIC driver_t domino_driver = {
|
|
"domino",
|
|
domino_methods,
|
|
0
|
|
};
|
|
|
|
STATIC devclass_t domino_devclass;
|
|
|
|
DRIVER_MODULE(domino, pci, domino_driver, domino_devclass, 0, 0);
|
|
|
|
STATIC device_method_t mode0_methods[] = {
|
|
DEVMETHOD(device_probe, mode0_probe),
|
|
DEVMETHOD(device_attach, mode0_attach),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
STATIC driver_t mode0_driver = {
|
|
"mode0",
|
|
mode0_methods,
|
|
0
|
|
};
|
|
|
|
STATIC devclass_t mode0_devclass;
|
|
|
|
DRIVER_MODULE(mode0, pci, mode0_driver, mode0_devclass, 0, 0);
|
|
#else
|
|
STATIC u_long asr_pcicount = 0;
|
|
STATIC struct pci_device asr_pcidev = {
|
|
"asr",
|
|
asr_probe,
|
|
asr_attach,
|
|
&asr_pcicount,
|
|
NULL
|
|
};
|
|
DATA_SET (asr_pciset, asr_pcidev);
|
|
|
|
STATIC u_long domino_pcicount = 0;
|
|
STATIC struct pci_device domino_pcidev = {
|
|
"domino",
|
|
domino_probe,
|
|
domino_attach,
|
|
&domino_pcicount,
|
|
NULL
|
|
};
|
|
DATA_SET (domino_pciset, domino_pcidev);
|
|
|
|
STATIC u_long mode0_pcicount = 0;
|
|
STATIC struct pci_device mode0_pcidev = {
|
|
"mode0",
|
|
mode0_probe,
|
|
mode0_attach,
|
|
&mode0_pcicount,
|
|
NULL
|
|
};
|
|
DATA_SET (mode0_pciset, mode0_pcidev);
|
|
#endif
|
|
|
|
/*
|
|
* devsw for asr hba driver
|
|
*
|
|
* only ioctl is used. the sd driver provides all other access.
|
|
*/
|
|
#define CDEV_MAJOR 97 /* prefered default character major */
|
|
STATIC struct cdevsw asr_cdevsw = {
|
|
asr_open, /* open */
|
|
asr_close, /* close */
|
|
noread, /* read */
|
|
nowrite, /* write */
|
|
asr_ioctl, /* ioctl */
|
|
nopoll, /* poll */
|
|
nommap, /* mmap */
|
|
nostrategy, /* strategy */
|
|
"asr", /* name */
|
|
CDEV_MAJOR, /* maj */
|
|
nodump, /* dump */
|
|
nopsize, /* psize */
|
|
0, /* flags */
|
|
-1 /* bmaj */
|
|
};
|
|
|
|
#ifdef ASR_MEASURE_PERFORMANCE
|
|
STATIC u_int32_t asr_time_delta __P((IN struct timeval start,
|
|
IN struct timeval end));
|
|
#endif
|
|
|
|
/*
|
|
* Initialize the dynamic cdevsw hooks.
|
|
*/
|
|
STATIC void
|
|
asr_drvinit (
|
|
void * unused)
|
|
{
|
|
static int asr_devsw_installed = 0;
|
|
|
|
if (asr_devsw_installed) {
|
|
return;
|
|
}
|
|
asr_devsw_installed++;
|
|
/*
|
|
* Find a free spot (the report during driver load used by
|
|
* osd layer in engine to generate the controlling nodes).
|
|
*/
|
|
while ((asr_cdevsw.d_maj < NUMCDEVSW)
|
|
&& (devsw(makedev(asr_cdevsw.d_maj,0)) != (struct cdevsw *)NULL)) {
|
|
++asr_cdevsw.d_maj;
|
|
}
|
|
if (asr_cdevsw.d_maj >= NUMCDEVSW) for (
|
|
asr_cdevsw.d_maj = 0;
|
|
(asr_cdevsw.d_maj < CDEV_MAJOR)
|
|
&& (devsw(makedev(asr_cdevsw.d_maj,0)) != (struct cdevsw *)NULL);
|
|
++asr_cdevsw.d_maj);
|
|
/*
|
|
* Come to papa
|
|
*/
|
|
cdevsw_add(&asr_cdevsw);
|
|
/*
|
|
* delete any nodes that would attach to the primary adapter,
|
|
* let the adapter scans add them.
|
|
*/
|
|
destroy_dev(makedev(asr_cdevsw.d_maj,0));
|
|
} /* asr_drvinit */
|
|
|
|
/* Must initialize before CAM layer picks up our HBA driver */
|
|
SYSINIT(asrdev,SI_SUB_DRIVERS,SI_ORDER_MIDDLE+CDEV_MAJOR,asr_drvinit,NULL)
|
|
|
|
/* I2O support routines */
|
|
#define defAlignLong(STRUCT,NAME) char NAME[sizeof(STRUCT)]
|
|
#define getAlignLong(STRUCT,NAME) ((STRUCT *)(NAME))
|
|
|
|
/*
|
|
* Fill message with default.
|
|
*/
|
|
STATIC PI2O_MESSAGE_FRAME
|
|
ASR_fillMessage (
|
|
IN char * Message,
|
|
IN u_int16_t size)
|
|
{
|
|
OUT PI2O_MESSAGE_FRAME Message_Ptr;
|
|
|
|
Message_Ptr = getAlignLong(I2O_MESSAGE_FRAME, Message);
|
|
bzero ((void *)Message_Ptr, size);
|
|
I2O_MESSAGE_FRAME_setVersionOffset(Message_Ptr, I2O_VERSION_11);
|
|
I2O_MESSAGE_FRAME_setMessageSize(Message_Ptr,
|
|
(size + sizeof(U32) - 1) >> 2);
|
|
I2O_MESSAGE_FRAME_setInitiatorAddress (Message_Ptr, 1);
|
|
return (Message_Ptr);
|
|
} /* ASR_fillMessage */
|
|
|
|
#define EMPTY_QUEUE ((U32)-1L)
|
|
|
|
STATIC INLINE U32
|
|
ASR_getMessage(
|
|
IN i2oRegs_t * virt)
|
|
{
|
|
OUT U32 MessageOffset;
|
|
|
|
if ((MessageOffset = virt->ToFIFO) == EMPTY_QUEUE) {
|
|
MessageOffset = virt->ToFIFO;
|
|
}
|
|
return (MessageOffset);
|
|
} /* ASR_getMessage */
|
|
|
|
/* Issue a polled command */
|
|
STATIC U32
|
|
ASR_initiateCp (
|
|
INOUT i2oRegs_t * virt,
|
|
IN PI2O_MESSAGE_FRAME Message)
|
|
{
|
|
OUT U32 Mask = -1L;
|
|
U32 MessageOffset;
|
|
u_int Delay = 1500;
|
|
|
|
/*
|
|
* ASR_initiateCp is only used for synchronous commands and will
|
|
* be made more resiliant to adapter delays since commands like
|
|
* resetIOP can cause the adapter to be deaf for a little time.
|
|
*/
|
|
while (((MessageOffset = ASR_getMessage(virt)) == EMPTY_QUEUE)
|
|
&& (--Delay != 0)) {
|
|
DELAY (10000);
|
|
}
|
|
if (MessageOffset != EMPTY_QUEUE) {
|
|
bcopy (Message, virt->Address + MessageOffset,
|
|
I2O_MESSAGE_FRAME_getMessageSize(Message) << 2);
|
|
/*
|
|
* Disable the Interrupts
|
|
*/
|
|
virt->Mask = (Mask = virt->Mask) | Mask_InterruptsDisabled;
|
|
virt->ToFIFO = MessageOffset;
|
|
}
|
|
return (Mask);
|
|
} /* ASR_initiateCp */
|
|
|
|
/*
|
|
* Reset the adapter.
|
|
*/
|
|
STATIC U32
|
|
ASR_resetIOP (
|
|
INOUT i2oRegs_t * virt)
|
|
{
|
|
struct resetMessage {
|
|
I2O_EXEC_IOP_RESET_MESSAGE M;
|
|
U32 R;
|
|
};
|
|
defAlignLong(struct resetMessage,Message);
|
|
PI2O_EXEC_IOP_RESET_MESSAGE Message_Ptr;
|
|
OUT U32 * volatile Reply_Ptr;
|
|
U32 Old;
|
|
|
|
/*
|
|
* Build up our copy of the Message.
|
|
*/
|
|
Message_Ptr = (PI2O_EXEC_IOP_RESET_MESSAGE)ASR_fillMessage(Message,
|
|
sizeof(I2O_EXEC_IOP_RESET_MESSAGE));
|
|
I2O_EXEC_IOP_RESET_MESSAGE_setFunction(Message_Ptr, I2O_EXEC_IOP_RESET);
|
|
/*
|
|
* Reset the Reply Status
|
|
*/
|
|
*(Reply_Ptr = (U32 *)((char *)Message_Ptr
|
|
+ sizeof(I2O_EXEC_IOP_RESET_MESSAGE))) = 0;
|
|
I2O_EXEC_IOP_RESET_MESSAGE_setStatusWordLowAddress(Message_Ptr,
|
|
KVTOPHYS((void *)Reply_Ptr));
|
|
/*
|
|
* Send the Message out
|
|
*/
|
|
if ((Old = ASR_initiateCp (virt, (PI2O_MESSAGE_FRAME)Message_Ptr)) != (U32)-1L) {
|
|
/*
|
|
* Wait for a response (Poll), timeouts are dangerous if
|
|
* the card is truly responsive. We assume response in 2s.
|
|
*/
|
|
u_int8_t Delay = 200;
|
|
|
|
while ((*Reply_Ptr == 0) && (--Delay != 0)) {
|
|
DELAY (10000);
|
|
}
|
|
/*
|
|
* Re-enable the interrupts.
|
|
*/
|
|
virt->Mask = Old;
|
|
ASSERT (*Reply_Ptr);
|
|
return (*Reply_Ptr);
|
|
}
|
|
ASSERT (Old != (U32)-1L);
|
|
return (0);
|
|
} /* ASR_resetIOP */
|
|
|
|
/*
|
|
* Get the curent state of the adapter
|
|
*/
|
|
STATIC INLINE PI2O_EXEC_STATUS_GET_REPLY
|
|
ASR_getStatus (
|
|
INOUT i2oRegs_t * virt,
|
|
OUT PI2O_EXEC_STATUS_GET_REPLY buffer)
|
|
{
|
|
defAlignLong(I2O_EXEC_STATUS_GET_MESSAGE,Message);
|
|
PI2O_EXEC_STATUS_GET_MESSAGE Message_Ptr;
|
|
U32 Old;
|
|
|
|
/*
|
|
* Build up our copy of the Message.
|
|
*/
|
|
Message_Ptr = (PI2O_EXEC_STATUS_GET_MESSAGE)ASR_fillMessage(Message,
|
|
sizeof(I2O_EXEC_STATUS_GET_MESSAGE));
|
|
I2O_EXEC_STATUS_GET_MESSAGE_setFunction(Message_Ptr,
|
|
I2O_EXEC_STATUS_GET);
|
|
I2O_EXEC_STATUS_GET_MESSAGE_setReplyBufferAddressLow(Message_Ptr,
|
|
KVTOPHYS((void *)buffer));
|
|
/* This one is a Byte Count */
|
|
I2O_EXEC_STATUS_GET_MESSAGE_setReplyBufferLength(Message_Ptr,
|
|
sizeof(I2O_EXEC_STATUS_GET_REPLY));
|
|
/*
|
|
* Reset the Reply Status
|
|
*/
|
|
bzero ((void *)buffer, sizeof(I2O_EXEC_STATUS_GET_REPLY));
|
|
/*
|
|
* Send the Message out
|
|
*/
|
|
if ((Old = ASR_initiateCp (virt, (PI2O_MESSAGE_FRAME)Message_Ptr)) != (U32)-1L) {
|
|
/*
|
|
* Wait for a response (Poll), timeouts are dangerous if
|
|
* the card is truly responsive. We assume response in 50ms.
|
|
*/
|
|
u_int8_t Delay = 50;
|
|
|
|
while (*((U8 * volatile)&buffer->SyncByte) == 0) {
|
|
if (--Delay == 0) {
|
|
buffer = (PI2O_EXEC_STATUS_GET_REPLY)NULL;
|
|
break;
|
|
}
|
|
DELAY (1000);
|
|
}
|
|
/*
|
|
* Re-enable the interrupts.
|
|
*/
|
|
virt->Mask = Old;
|
|
return (buffer);
|
|
}
|
|
return ((PI2O_EXEC_STATUS_GET_REPLY)NULL);
|
|
} /* ASR_getStatus */
|
|
|
|
/*
|
|
* Check if the device is a SCSI I2O HBA, and add it to the list.
|
|
*/
|
|
|
|
/*
|
|
* Probe for ASR controller. If we find it, we will use it.
|
|
* virtual adapters.
|
|
*/
|
|
STATIC PROBE_RET
|
|
asr_probe(PROBE_ARGS)
|
|
{
|
|
PROBE_SET();
|
|
if (id == 0xA5011044) {
|
|
PROBE_RETURN ("Adaptec Caching SCSI RAID");
|
|
}
|
|
PROBE_RETURN (NULL);
|
|
} /* asr_probe */
|
|
|
|
/*
|
|
* Probe/Attach for DOMINO chipset.
|
|
*/
|
|
STATIC PROBE_RET
|
|
domino_probe(PROBE_ARGS)
|
|
{
|
|
PROBE_SET();
|
|
if (id == 0x10121044) {
|
|
PROBE_RETURN ("Adaptec Caching Memory Controller");
|
|
}
|
|
PROBE_RETURN (NULL);
|
|
} /* domino_probe */
|
|
|
|
STATIC ATTACH_RET
|
|
domino_attach (ATTACH_ARGS)
|
|
{
|
|
ATTACH_RETURN (0);
|
|
} /* domino_attach */
|
|
|
|
/*
|
|
* Probe/Attach for MODE0 adapters.
|
|
*/
|
|
STATIC PROBE_RET
|
|
mode0_probe(PROBE_ARGS)
|
|
{
|
|
PROBE_SET();
|
|
if (id == 0x908010B5) {
|
|
PROBE_RETURN ("Adaptec Mode0 3xxx");
|
|
}
|
|
#if 0 /* this would match any generic i960 -- mjs */
|
|
if (id == 0x19608086) {
|
|
PROBE_RETURN ("Adaptec Mode0 1xxx");
|
|
}
|
|
#endif
|
|
PROBE_RETURN (NULL);
|
|
} /* mode0_probe */
|
|
|
|
STATIC ATTACH_RET
|
|
mode0_attach (ATTACH_ARGS)
|
|
{
|
|
ATTACH_RETURN (0);
|
|
} /* mode0_attach */
|
|
|
|
STATIC INLINE union asr_ccb *
|
|
asr_alloc_ccb (
|
|
IN Asr_softc_t * sc)
|
|
{
|
|
OUT union asr_ccb * new_ccb;
|
|
|
|
if ((new_ccb = (union asr_ccb *)malloc(sizeof(*new_ccb),
|
|
M_DEVBUF, M_WAITOK)) != (union asr_ccb *)NULL) {
|
|
bzero (new_ccb, sizeof(*new_ccb));
|
|
new_ccb->ccb_h.pinfo.priority = 1;
|
|
new_ccb->ccb_h.pinfo.index = CAM_UNQUEUED_INDEX;
|
|
new_ccb->ccb_h.spriv_ptr0 = sc;
|
|
}
|
|
return (new_ccb);
|
|
} /* asr_alloc_ccb */
|
|
|
|
STATIC INLINE void
|
|
asr_free_ccb (
|
|
IN union asr_ccb * free_ccb)
|
|
{
|
|
free(free_ccb, M_DEVBUF);
|
|
} /* asr_free_ccb */
|
|
|
|
/*
|
|
* Print inquiry data `carefully'
|
|
*/
|
|
STATIC void
|
|
ASR_prstring (
|
|
u_int8_t * s,
|
|
int len)
|
|
{
|
|
while ((--len >= 0) && (*s) && (*s != ' ') && (*s != '-')) {
|
|
printf ("%c", *(s++));
|
|
}
|
|
} /* ASR_prstring */
|
|
|
|
/*
|
|
* Prototypes
|
|
*/
|
|
STATIC INLINE int ASR_queue __P((
|
|
IN Asr_softc_t * sc,
|
|
IN PI2O_MESSAGE_FRAME Message));
|
|
/*
|
|
* Send a message synchronously and without Interrupt to a ccb.
|
|
*/
|
|
STATIC int
|
|
ASR_queue_s (
|
|
INOUT union asr_ccb * ccb,
|
|
IN PI2O_MESSAGE_FRAME Message)
|
|
{
|
|
int s;
|
|
U32 Mask;
|
|
Asr_softc_t * sc = (Asr_softc_t *)(ccb->ccb_h.spriv_ptr0);
|
|
|
|
/*
|
|
* We do not need any (optional byteswapping) method access to
|
|
* the Initiator context field.
|
|
*/
|
|
I2O_MESSAGE_FRAME_setInitiatorContext64(Message, (long)ccb);
|
|
|
|
/* Prevent interrupt service */
|
|
s = splcam ();
|
|
sc->ha_Virt->Mask = (Mask = sc->ha_Virt->Mask)
|
|
| Mask_InterruptsDisabled;
|
|
|
|
if (ASR_queue (sc, Message) == EMPTY_QUEUE) {
|
|
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
|
|
ccb->ccb_h.status |= CAM_REQUEUE_REQ;
|
|
}
|
|
|
|
/*
|
|
* Wait for this board to report a finished instruction.
|
|
*/
|
|
while (ccb->ccb_h.status == CAM_REQ_INPROG) {
|
|
(void)asr_intr (sc);
|
|
}
|
|
|
|
/* Re-enable Interrupts */
|
|
sc->ha_Virt->Mask = Mask;
|
|
splx(s);
|
|
|
|
return (ccb->ccb_h.status);
|
|
} /* ASR_queue_s */
|
|
|
|
/*
|
|
* Send a message synchronously to a Asr_softc_t
|
|
*/
|
|
STATIC int
|
|
ASR_queue_c (
|
|
IN Asr_softc_t * sc,
|
|
IN PI2O_MESSAGE_FRAME Message)
|
|
{
|
|
union asr_ccb * ccb;
|
|
OUT int status;
|
|
|
|
if ((ccb = asr_alloc_ccb (sc)) == (union asr_ccb *)NULL) {
|
|
return (CAM_REQUEUE_REQ);
|
|
}
|
|
|
|
status = ASR_queue_s (ccb, Message);
|
|
|
|
asr_free_ccb(ccb);
|
|
|
|
return (status);
|
|
} /* ASR_queue_c */
|
|
|
|
/*
|
|
* Add the specified ccb to the active queue
|
|
*/
|
|
STATIC INLINE void
|
|
ASR_ccbAdd (
|
|
IN Asr_softc_t * sc,
|
|
INOUT union asr_ccb * ccb)
|
|
{
|
|
LIST_INSERT_HEAD(&(sc->ha_ccb), &(ccb->ccb_h), sim_links.le);
|
|
if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) {
|
|
if (ccb->ccb_h.timeout == CAM_TIME_DEFAULT) {
|
|
/*
|
|
* RAID systems can take considerable time to
|
|
* complete some commands given the large cache
|
|
* flashes switching from write back to write thru.
|
|
*/
|
|
ccb->ccb_h.timeout = 6 * 60 * 1000;
|
|
}
|
|
ccb->ccb_h.timeout_ch = timeout(asr_timeout, (caddr_t)ccb,
|
|
(ccb->ccb_h.timeout * hz) / 1000);
|
|
}
|
|
} /* ASR_ccbAdd */
|
|
|
|
/*
|
|
* Remove the specified ccb from the active queue.
|
|
*/
|
|
STATIC INLINE void
|
|
ASR_ccbRemove (
|
|
IN Asr_softc_t * sc,
|
|
INOUT union asr_ccb * ccb)
|
|
{
|
|
untimeout(asr_timeout, (caddr_t)ccb, ccb->ccb_h.timeout_ch);
|
|
LIST_REMOVE(&ccb->ccb_h, sim_links.le);
|
|
} /* ASR_ccbRemove */
|
|
|
|
/*
|
|
* Fail all the active commands, so they get re-issued by the operating
|
|
* system.
|
|
*/
|
|
STATIC INLINE void
|
|
ASR_failActiveCommands (
|
|
IN Asr_softc_t * sc)
|
|
{
|
|
struct ccb_hdr * ccb;
|
|
defAlignLong(I2O_EXEC_LCT_NOTIFY_MESSAGE,Message);
|
|
PI2O_EXEC_LCT_NOTIFY_MESSAGE Message_Ptr;
|
|
|
|
/* Send a blind LCT command to wait for the enableSys to complete */
|
|
Message_Ptr = (PI2O_EXEC_LCT_NOTIFY_MESSAGE)ASR_fillMessage(Message,
|
|
sizeof(I2O_EXEC_LCT_NOTIFY_MESSAGE) - sizeof(I2O_SG_ELEMENT));
|
|
I2O_MESSAGE_FRAME_setFunction(&(Message_Ptr->StdMessageFrame),
|
|
I2O_EXEC_LCT_NOTIFY);
|
|
I2O_EXEC_LCT_NOTIFY_MESSAGE_setClassIdentifier(Message_Ptr,
|
|
I2O_CLASS_MATCH_ANYCLASS);
|
|
(void)ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
|
|
|
|
LIST_FOREACH(ccb, &(sc->ha_ccb), sim_links.le) {
|
|
|
|
ASR_ccbRemove (sc, (union asr_ccb *)ccb);
|
|
|
|
ccb->status &= ~CAM_STATUS_MASK;
|
|
ccb->status |= CAM_REQUEUE_REQ;
|
|
((struct ccb_scsiio *)ccb)->resid
|
|
= ((struct ccb_scsiio *)ccb)->dxfer_len;
|
|
|
|
if (ccb->path) {
|
|
xpt_done ((union ccb *)ccb);
|
|
} else {
|
|
wakeup ((caddr_t)ccb);
|
|
}
|
|
}
|
|
} /* ASR_failActiveCommands */
|
|
|
|
/*
|
|
* The following command causes the HBA to reset the specific bus
|
|
*/
|
|
STATIC INLINE void
|
|
ASR_resetBus(
|
|
IN Asr_softc_t * sc,
|
|
IN int bus)
|
|
{
|
|
defAlignLong(I2O_HBA_BUS_RESET_MESSAGE,Message);
|
|
I2O_HBA_BUS_RESET_MESSAGE * Message_Ptr;
|
|
PI2O_LCT_ENTRY Device;
|
|
|
|
Message_Ptr = (I2O_HBA_BUS_RESET_MESSAGE *)ASR_fillMessage(Message,
|
|
sizeof(I2O_HBA_BUS_RESET_MESSAGE));
|
|
I2O_MESSAGE_FRAME_setFunction(&Message_Ptr->StdMessageFrame,
|
|
I2O_HBA_BUS_RESET);
|
|
for (Device = sc->ha_LCT->LCTEntry; Device < (PI2O_LCT_ENTRY)
|
|
(((U32 *)sc->ha_LCT)+I2O_LCT_getTableSize(sc->ha_LCT));
|
|
++Device) {
|
|
if (((Device->le_type & I2O_PORT) != 0)
|
|
&& (Device->le_bus == bus)) {
|
|
I2O_MESSAGE_FRAME_setTargetAddress(
|
|
&Message_Ptr->StdMessageFrame,
|
|
I2O_LCT_ENTRY_getLocalTID(Device));
|
|
/* Asynchronous command, with no expectations */
|
|
(void)ASR_queue(sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
|
|
break;
|
|
}
|
|
}
|
|
} /* ASR_resetBus */
|
|
|
|
STATIC INLINE int
|
|
ASR_getBlinkLedCode (
|
|
IN Asr_softc_t * sc)
|
|
{
|
|
if ((sc != (Asr_softc_t *)NULL)
|
|
&& (sc->ha_blinkLED != (u_int8_t *)NULL)
|
|
&& (sc->ha_blinkLED[1] == 0xBC)) {
|
|
return (sc->ha_blinkLED[0]);
|
|
}
|
|
return (0);
|
|
} /* ASR_getBlinkCode */
|
|
|
|
/*
|
|
* Determine the address of an TID lookup. Must be done at high priority
|
|
* since the address can be changed by other threads of execution.
|
|
*
|
|
* Returns NULL pointer if not indexible (but will attempt to generate
|
|
* an index if `new_entry' flag is set to TRUE).
|
|
*
|
|
* All addressible entries are to be guaranteed zero if never initialized.
|
|
*/
|
|
STATIC INLINE tid_t *
|
|
ASR_getTidAddress(
|
|
INOUT Asr_softc_t * sc,
|
|
IN int bus,
|
|
IN int target,
|
|
IN int lun,
|
|
IN int new_entry)
|
|
{
|
|
target2lun_t * bus_ptr;
|
|
lun2tid_t * target_ptr;
|
|
unsigned new_size;
|
|
|
|
/*
|
|
* Validity checking of incoming parameters. More of a bound
|
|
* expansion limit than an issue with the code dealing with the
|
|
* values.
|
|
*
|
|
* sc must be valid before it gets here, so that check could be
|
|
* dropped if speed a critical issue.
|
|
*/
|
|
if ((sc == (Asr_softc_t *)NULL)
|
|
|| (bus > MAX_CHANNEL)
|
|
|| (target > sc->ha_MaxId)
|
|
|| (lun > sc->ha_MaxLun)) {
|
|
debug_asr_printf("(%lx,%d,%d,%d) target out of range\n",
|
|
(u_long)sc, bus, target, lun);
|
|
return ((tid_t *)NULL);
|
|
}
|
|
/*
|
|
* See if there is an associated bus list.
|
|
*
|
|
* for performance, allocate in size of BUS_CHUNK chunks.
|
|
* BUS_CHUNK must be a power of two. This is to reduce
|
|
* fragmentation effects on the allocations.
|
|
*/
|
|
# define BUS_CHUNK 8
|
|
new_size = ((target + BUS_CHUNK - 1) & ~(BUS_CHUNK - 1));
|
|
if ((bus_ptr = sc->ha_targets[bus]) == (target2lun_t *)NULL) {
|
|
/*
|
|
* Allocate a new structure?
|
|
* Since one element in structure, the +1
|
|
* needed for size has been abstracted.
|
|
*/
|
|
if ((new_entry == FALSE)
|
|
|| ((sc->ha_targets[bus] = bus_ptr = (target2lun_t *)malloc (
|
|
sizeof(*bus_ptr) + (sizeof(bus_ptr->LUN) * new_size),
|
|
M_TEMP, M_WAITOK))
|
|
== (target2lun_t *)NULL)) {
|
|
debug_asr_printf("failed to allocate bus list\n");
|
|
return ((tid_t *)NULL);
|
|
}
|
|
bzero (bus_ptr, sizeof(*bus_ptr)
|
|
+ (sizeof(bus_ptr->LUN) * new_size));
|
|
bus_ptr->size = new_size + 1;
|
|
} else if (bus_ptr->size <= new_size) {
|
|
target2lun_t * new_bus_ptr;
|
|
|
|
/*
|
|
* Reallocate a new structure?
|
|
* Since one element in structure, the +1
|
|
* needed for size has been abstracted.
|
|
*/
|
|
if ((new_entry == FALSE)
|
|
|| ((new_bus_ptr = (target2lun_t *)malloc (
|
|
sizeof(*bus_ptr) + (sizeof(bus_ptr->LUN) * new_size),
|
|
M_TEMP, M_WAITOK))
|
|
== (target2lun_t *)NULL)) {
|
|
debug_asr_printf("failed to reallocate bus list\n");
|
|
return ((tid_t *)NULL);
|
|
}
|
|
/*
|
|
* Zero and copy the whole thing, safer, simpler coding
|
|
* and not really performance critical at this point.
|
|
*/
|
|
bzero (new_bus_ptr, sizeof(*bus_ptr)
|
|
+ (sizeof(bus_ptr->LUN) * new_size));
|
|
bcopy (bus_ptr, new_bus_ptr, sizeof(*bus_ptr)
|
|
+ (sizeof(bus_ptr->LUN) * (bus_ptr->size - 1)));
|
|
sc->ha_targets[bus] = new_bus_ptr;
|
|
free (bus_ptr, M_TEMP);
|
|
bus_ptr = new_bus_ptr;
|
|
bus_ptr->size = new_size + 1;
|
|
}
|
|
/*
|
|
* We now have the bus list, lets get to the target list.
|
|
* Since most systems have only *one* lun, we do not allocate
|
|
* in chunks as above, here we allow one, then in chunk sizes.
|
|
* TARGET_CHUNK must be a power of two. This is to reduce
|
|
* fragmentation effects on the allocations.
|
|
*/
|
|
# define TARGET_CHUNK 8
|
|
if ((new_size = lun) != 0) {
|
|
new_size = ((lun + TARGET_CHUNK - 1) & ~(TARGET_CHUNK - 1));
|
|
}
|
|
if ((target_ptr = bus_ptr->LUN[target]) == (lun2tid_t *)NULL) {
|
|
/*
|
|
* Allocate a new structure?
|
|
* Since one element in structure, the +1
|
|
* needed for size has been abstracted.
|
|
*/
|
|
if ((new_entry == FALSE)
|
|
|| ((bus_ptr->LUN[target] = target_ptr = (lun2tid_t *)malloc (
|
|
sizeof(*target_ptr) + (sizeof(target_ptr->TID) * new_size),
|
|
M_TEMP, M_WAITOK))
|
|
== (lun2tid_t *)NULL)) {
|
|
debug_asr_printf("failed to allocate target list\n");
|
|
return ((tid_t *)NULL);
|
|
}
|
|
bzero (target_ptr, sizeof(*target_ptr)
|
|
+ (sizeof(target_ptr->TID) * new_size));
|
|
target_ptr->size = new_size + 1;
|
|
} else if (target_ptr->size <= new_size) {
|
|
lun2tid_t * new_target_ptr;
|
|
|
|
/*
|
|
* Reallocate a new structure?
|
|
* Since one element in structure, the +1
|
|
* needed for size has been abstracted.
|
|
*/
|
|
if ((new_entry == FALSE)
|
|
|| ((new_target_ptr = (lun2tid_t *)malloc (
|
|
sizeof(*target_ptr) + (sizeof(target_ptr->TID) * new_size),
|
|
M_TEMP, M_WAITOK))
|
|
== (lun2tid_t *)NULL)) {
|
|
debug_asr_printf("failed to reallocate target list\n");
|
|
return ((tid_t *)NULL);
|
|
}
|
|
/*
|
|
* Zero and copy the whole thing, safer, simpler coding
|
|
* and not really performance critical at this point.
|
|
*/
|
|
bzero (new_target_ptr, sizeof(*target_ptr)
|
|
+ (sizeof(target_ptr->TID) * new_size));
|
|
bcopy (target_ptr, new_target_ptr,
|
|
sizeof(*target_ptr)
|
|
+ (sizeof(target_ptr->TID) * (target_ptr->size - 1)));
|
|
bus_ptr->LUN[target] = new_target_ptr;
|
|
free (target_ptr, M_TEMP);
|
|
target_ptr = new_target_ptr;
|
|
target_ptr->size = new_size + 1;
|
|
}
|
|
/*
|
|
* Now, acquire the TID address from the LUN indexed list.
|
|
*/
|
|
return (&(target_ptr->TID[lun]));
|
|
} /* ASR_getTidAddress */
|
|
|
|
/*
|
|
* Get a pre-existing TID relationship.
|
|
*
|
|
* If the TID was never set, return (tid_t)-1.
|
|
*
|
|
* should use mutex rather than spl.
|
|
*/
|
|
STATIC INLINE tid_t
|
|
ASR_getTid (
|
|
IN Asr_softc_t * sc,
|
|
IN int bus,
|
|
IN int target,
|
|
IN int lun)
|
|
{
|
|
tid_t * tid_ptr;
|
|
int s;
|
|
OUT tid_t retval;
|
|
|
|
s = splcam();
|
|
if (((tid_ptr = ASR_getTidAddress (sc, bus, target, lun, FALSE))
|
|
== (tid_t *)NULL)
|
|
/* (tid_t)0 or (tid_t)-1 indicate no TID */
|
|
|| (*tid_ptr == (tid_t)0)) {
|
|
splx(s);
|
|
return ((tid_t)-1);
|
|
}
|
|
retval = *tid_ptr;
|
|
splx(s);
|
|
return (retval);
|
|
} /* ASR_getTid */
|
|
|
|
/*
|
|
* Set a TID relationship.
|
|
*
|
|
* If the TID was not set, return (tid_t)-1.
|
|
*
|
|
* should use mutex rather than spl.
|
|
*/
|
|
STATIC INLINE tid_t
|
|
ASR_setTid (
|
|
INOUT Asr_softc_t * sc,
|
|
IN int bus,
|
|
IN int target,
|
|
IN int lun,
|
|
INOUT tid_t TID)
|
|
{
|
|
tid_t * tid_ptr;
|
|
int s;
|
|
|
|
if (TID != (tid_t)-1) {
|
|
if (TID == 0) {
|
|
return ((tid_t)-1);
|
|
}
|
|
s = splcam();
|
|
if ((tid_ptr = ASR_getTidAddress (sc, bus, target, lun, TRUE))
|
|
== (tid_t *)NULL) {
|
|
splx(s);
|
|
return ((tid_t)-1);
|
|
}
|
|
*tid_ptr = TID;
|
|
splx(s);
|
|
}
|
|
return (TID);
|
|
} /* ASR_setTid */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
/* Function ASR_rescan */
|
|
/*-------------------------------------------------------------------------*/
|
|
/* The Parameters Passed To This Function Are : */
|
|
/* Asr_softc_t * : HBA miniport driver's adapter data storage. */
|
|
/* */
|
|
/* This Function Will rescan the adapter and resynchronize any data */
|
|
/* */
|
|
/* Return : 0 For OK, Error Code Otherwise */
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
STATIC INLINE int
|
|
ASR_rescan(
|
|
IN Asr_softc_t * sc)
|
|
{
|
|
int bus;
|
|
OUT int error;
|
|
|
|
/*
|
|
* Re-acquire the LCT table and synchronize us to the adapter.
|
|
*/
|
|
if ((error = ASR_acquireLct(sc)) == 0) {
|
|
error = ASR_acquireHrt(sc);
|
|
}
|
|
|
|
if (error != 0) {
|
|
return error;
|
|
}
|
|
|
|
bus = sc->ha_MaxBus;
|
|
/* Reset all existing cached TID lookups */
|
|
do {
|
|
int target;
|
|
|
|
/*
|
|
* Scan for all targets on this bus to see if they
|
|
* got affected by the rescan.
|
|
*/
|
|
for (target = 0; target <= sc->ha_MaxId; ++target) {
|
|
int lun;
|
|
|
|
for (lun = 0; lun <= sc->ha_MaxLun; ++lun) {
|
|
PI2O_LCT_ENTRY Device;
|
|
tid_t TID = (tid_t)-1;
|
|
|
|
/*
|
|
* See if the cached TID changed. Search for
|
|
* the device in our new LCT.
|
|
*/
|
|
for (Device = sc->ha_LCT->LCTEntry;
|
|
Device < (PI2O_LCT_ENTRY)(((U32 *)sc->ha_LCT)
|
|
+ I2O_LCT_getTableSize(sc->ha_LCT));
|
|
++Device) {
|
|
if ((Device->le_type != I2O_UNKNOWN)
|
|
&& (Device->le_bus == bus)
|
|
&& (Device->le_target == target)
|
|
&& (Device->le_lun == lun)
|
|
&& (I2O_LCT_ENTRY_getUserTID(Device)
|
|
== 0xFFF)) {
|
|
TID = I2O_LCT_ENTRY_getLocalTID(
|
|
Device);
|
|
break;
|
|
}
|
|
}
|
|
/*
|
|
* Indicate to the OS that the label needs
|
|
* to be recalculated, or that the specific
|
|
* open device is no longer valid (Merde)
|
|
* because the cached TID changed.
|
|
* ASR_getTid (sc, bus, target, lun) != TI
|
|
*/
|
|
/*
|
|
* We have the option of clearing the
|
|
* cached TID for it to be rescanned, or to
|
|
* set it now even if the device never got
|
|
* accessed. We chose the later since we
|
|
* currently do not use the condition that
|
|
* the TID ever got cached.
|
|
*/
|
|
ASR_setTid (sc, bus, target, lun, TID);
|
|
}
|
|
}
|
|
} while (--bus >= 0);
|
|
return (error);
|
|
} /* ASR_rescan */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
/* Function ASR_reset */
|
|
/*-------------------------------------------------------------------------*/
|
|
/* The Parameters Passed To This Function Are : */
|
|
/* Asr_softc_t * : HBA miniport driver's adapter data storage. */
|
|
/* */
|
|
/* This Function Will reset the adapter and resynchronize any data */
|
|
/* */
|
|
/* Return : None */
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
STATIC INLINE void
|
|
ASR_reset(
|
|
IN Asr_softc_t * sc)
|
|
{
|
|
(void)ASR_resetIOP (sc->ha_Virt);
|
|
(void)ASR_init (sc);
|
|
(void)ASR_rescan (sc);
|
|
(void)ASR_failActiveCommands (sc);
|
|
} /* ASR_reset */
|
|
|
|
/*
|
|
* Device timeout handler.
|
|
*/
|
|
STATIC void
|
|
asr_timeout(
|
|
INOUT void * arg)
|
|
{
|
|
union asr_ccb * ccb = (union asr_ccb *)arg;
|
|
Asr_softc_t * sc = (Asr_softc_t *)(ccb->ccb_h.spriv_ptr0);
|
|
int s;
|
|
|
|
debug_asr_print_path(ccb);
|
|
debug_asr_printf("timed out");
|
|
|
|
/*
|
|
* Check if the adapter has locked up?
|
|
*/
|
|
if ((s = ASR_getBlinkLedCode(sc)) != 0) {
|
|
debug_asr_printf (
|
|
" due to adapter blinkled code %x\nresetting adapter\n", s);
|
|
ASR_reset (sc);
|
|
return;
|
|
}
|
|
/*
|
|
* Abort does not function on the ASR card!!! Walking away from
|
|
* the SCSI command is also *very* dangerous. A SCSI BUS reset is
|
|
* our best bet, followed by a complete adapter reset if that fails.
|
|
*/
|
|
s = splcam();
|
|
if (ccb->ccb_h.status == CAM_CMD_TIMEOUT) {
|
|
debug_asr_printf (" AGAIN\nreinitializing adapter\n");
|
|
ASR_reset (sc);
|
|
splx(s);
|
|
return;
|
|
}
|
|
debug_asr_printf ("\nresetting bus\n");
|
|
/* If the BUS reset does not take, then an adapter reset is next! */
|
|
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
|
|
ccb->ccb_h.status |= CAM_CMD_TIMEOUT;
|
|
ccb->ccb_h.timeout_ch = timeout(asr_timeout, (caddr_t)ccb,
|
|
(ccb->ccb_h.timeout * hz) / 1000);
|
|
ASR_resetBus (sc, cam_sim_bus(xpt_path_sim(ccb->ccb_h.path)));
|
|
splx(s);
|
|
} /* asr_timeout */
|
|
|
|
/*
|
|
* send a message asynchronously
|
|
*/
|
|
STATIC INLINE int
|
|
ASR_queue(
|
|
IN Asr_softc_t * sc,
|
|
IN PI2O_MESSAGE_FRAME Message)
|
|
{
|
|
OUT U32 MessageOffset;
|
|
union asr_ccb * ccb;
|
|
|
|
debug_asr_printf ("Host Command Dump:\n");
|
|
debug_asr_dump_message (Message);
|
|
|
|
/*
|
|
* Limit the number of Messages sent to this HBA. Better to sleep,
|
|
* than to hardware loop like a nut! By limiting the number of
|
|
* messages to an individual HBA here, we manage to perform all
|
|
* the processing of the message ready to drop the next one into
|
|
* the controller. We could limit the messages we are allowed to
|
|
* take, but that may have a performance hit.
|
|
*/
|
|
ccb = (union asr_ccb *)(long)
|
|
I2O_MESSAGE_FRAME_getInitiatorContext64(Message);
|
|
|
|
if (((MessageOffset = ASR_getMessage(sc->ha_Virt)) != EMPTY_QUEUE)
|
|
|| ((MessageOffset = ASR_getMessage(sc->ha_Virt)) != EMPTY_QUEUE)) {
|
|
#ifdef ASR_MEASURE_PERFORMANCE
|
|
int startTimeIndex;
|
|
|
|
if (ccb) {
|
|
++sc->ha_performance.command_count[
|
|
(int) ccb->csio.cdb_io.cdb_bytes[0]];
|
|
DEQ_TIMEQ_FREE_LIST(startTimeIndex,
|
|
sc->ha_timeQFreeList,
|
|
sc->ha_timeQFreeHead,
|
|
sc->ha_timeQFreeTail);
|
|
if (-1 != startTimeIndex) {
|
|
microtime(&sc->ha_timeQ[startTimeIndex]);
|
|
}
|
|
/* Time stamp the command before we send it out */
|
|
((PRIVATE_SCSI_SCB_EXECUTE_MESSAGE *) Message)->
|
|
PrivateMessageFrame.TransactionContext
|
|
= (I2O_TRANSACTION_CONTEXT) startTimeIndex;
|
|
|
|
++sc->ha_submitted_ccbs_count;
|
|
if (sc->ha_performance.max_submit_count
|
|
< sc->ha_submitted_ccbs_count) {
|
|
sc->ha_performance.max_submit_count
|
|
= sc->ha_submitted_ccbs_count;
|
|
}
|
|
}
|
|
#endif
|
|
bcopy (Message, sc->ha_Virt->Address + MessageOffset,
|
|
I2O_MESSAGE_FRAME_getMessageSize(Message) << 2);
|
|
if (ccb) {
|
|
ASR_ccbAdd (sc, ccb);
|
|
}
|
|
/* Post the command */
|
|
sc->ha_Virt->ToFIFO = MessageOffset;
|
|
} else {
|
|
if (ASR_getBlinkLedCode(sc)) {
|
|
ASR_reset (sc);
|
|
}
|
|
}
|
|
return (MessageOffset);
|
|
} /* ASR_queue */
|
|
|
|
|
|
/* Simple Scatter Gather elements */
|
|
#define SG(SGL,Index,Flags,Buffer,Size) \
|
|
I2O_FLAGS_COUNT_setCount( \
|
|
&(((PI2O_SG_ELEMENT)(SGL))->u.Simple[Index].FlagsCount), \
|
|
Size); \
|
|
I2O_FLAGS_COUNT_setFlags( \
|
|
&(((PI2O_SG_ELEMENT)(SGL))->u.Simple[Index].FlagsCount), \
|
|
I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT | (Flags)); \
|
|
I2O_SGE_SIMPLE_ELEMENT_setPhysicalAddress( \
|
|
&(((PI2O_SG_ELEMENT)(SGL))->u.Simple[Index]), \
|
|
(Buffer == NULL) ? NULL : KVTOPHYS(Buffer))
|
|
|
|
/*
|
|
* Retrieve Parameter Group.
|
|
* Buffer must be allocated using defAlignLong macro.
|
|
*/
|
|
STATIC void *
|
|
ASR_getParams(
|
|
IN Asr_softc_t * sc,
|
|
IN tid_t TID,
|
|
IN int Group,
|
|
OUT void * Buffer,
|
|
IN unsigned BufferSize)
|
|
{
|
|
struct paramGetMessage {
|
|
I2O_UTIL_PARAMS_GET_MESSAGE M;
|
|
char F[
|
|
sizeof(I2O_SGE_SIMPLE_ELEMENT)*2 - sizeof(I2O_SG_ELEMENT)];
|
|
struct Operations {
|
|
I2O_PARAM_OPERATIONS_LIST_HEADER Header;
|
|
I2O_PARAM_OPERATION_ALL_TEMPLATE Template[1];
|
|
} O;
|
|
};
|
|
defAlignLong(struct paramGetMessage, Message);
|
|
struct Operations * Operations_Ptr;
|
|
I2O_UTIL_PARAMS_GET_MESSAGE * Message_Ptr;
|
|
struct ParamBuffer {
|
|
I2O_PARAM_RESULTS_LIST_HEADER Header;
|
|
I2O_PARAM_READ_OPERATION_RESULT Read;
|
|
char Info[1];
|
|
} * Buffer_Ptr;
|
|
|
|
Message_Ptr = (I2O_UTIL_PARAMS_GET_MESSAGE *)ASR_fillMessage(Message,
|
|
sizeof(I2O_UTIL_PARAMS_GET_MESSAGE)
|
|
+ sizeof(I2O_SGE_SIMPLE_ELEMENT)*2 - sizeof(I2O_SG_ELEMENT));
|
|
Operations_Ptr = (struct Operations *)((char *)Message_Ptr
|
|
+ sizeof(I2O_UTIL_PARAMS_GET_MESSAGE)
|
|
+ sizeof(I2O_SGE_SIMPLE_ELEMENT)*2 - sizeof(I2O_SG_ELEMENT));
|
|
bzero ((void *)Operations_Ptr, sizeof(struct Operations));
|
|
I2O_PARAM_OPERATIONS_LIST_HEADER_setOperationCount(
|
|
&(Operations_Ptr->Header), 1);
|
|
I2O_PARAM_OPERATION_ALL_TEMPLATE_setOperation(
|
|
&(Operations_Ptr->Template[0]), I2O_PARAMS_OPERATION_FIELD_GET);
|
|
I2O_PARAM_OPERATION_ALL_TEMPLATE_setFieldCount(
|
|
&(Operations_Ptr->Template[0]), 0xFFFF);
|
|
I2O_PARAM_OPERATION_ALL_TEMPLATE_setGroupNumber(
|
|
&(Operations_Ptr->Template[0]), Group);
|
|
bzero ((void *)(Buffer_Ptr = getAlignLong(struct ParamBuffer, Buffer)),
|
|
BufferSize);
|
|
|
|
I2O_MESSAGE_FRAME_setVersionOffset(&(Message_Ptr->StdMessageFrame),
|
|
I2O_VERSION_11
|
|
+ (((sizeof(I2O_UTIL_PARAMS_GET_MESSAGE) - sizeof(I2O_SG_ELEMENT))
|
|
/ sizeof(U32)) << 4));
|
|
I2O_MESSAGE_FRAME_setTargetAddress (&(Message_Ptr->StdMessageFrame),
|
|
TID);
|
|
I2O_MESSAGE_FRAME_setFunction (&(Message_Ptr->StdMessageFrame),
|
|
I2O_UTIL_PARAMS_GET);
|
|
/*
|
|
* Set up the buffers as scatter gather elements.
|
|
*/
|
|
SG(&(Message_Ptr->SGL), 0,
|
|
I2O_SGL_FLAGS_DIR | I2O_SGL_FLAGS_END_OF_BUFFER,
|
|
Operations_Ptr, sizeof(struct Operations));
|
|
SG(&(Message_Ptr->SGL), 1,
|
|
I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER,
|
|
Buffer_Ptr, BufferSize);
|
|
|
|
if ((ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr) == CAM_REQ_CMP)
|
|
&& (Buffer_Ptr->Header.ResultCount)) {
|
|
return ((void *)(Buffer_Ptr->Info));
|
|
}
|
|
return ((void *)NULL);
|
|
} /* ASR_getParams */
|
|
|
|
/*
|
|
* Acquire the LCT information.
|
|
*/
|
|
STATIC INLINE int
|
|
ASR_acquireLct (
|
|
INOUT Asr_softc_t * sc)
|
|
{
|
|
PI2O_EXEC_LCT_NOTIFY_MESSAGE Message_Ptr;
|
|
PI2O_SGE_SIMPLE_ELEMENT sg;
|
|
int MessageSizeInBytes;
|
|
caddr_t v;
|
|
int len;
|
|
I2O_LCT Table;
|
|
PI2O_LCT_ENTRY Entry;
|
|
|
|
/*
|
|
* sc value assumed valid
|
|
*/
|
|
MessageSizeInBytes = sizeof(I2O_EXEC_LCT_NOTIFY_MESSAGE)
|
|
- sizeof(I2O_SG_ELEMENT) + sizeof(I2O_SGE_SIMPLE_ELEMENT);
|
|
if ((Message_Ptr = (PI2O_EXEC_LCT_NOTIFY_MESSAGE)malloc (
|
|
MessageSizeInBytes, M_TEMP, M_WAITOK))
|
|
== (PI2O_EXEC_LCT_NOTIFY_MESSAGE)NULL) {
|
|
return (ENOMEM);
|
|
}
|
|
(void)ASR_fillMessage((char *)Message_Ptr, MessageSizeInBytes);
|
|
I2O_MESSAGE_FRAME_setVersionOffset(&(Message_Ptr->StdMessageFrame),
|
|
(I2O_VERSION_11 +
|
|
(((sizeof(I2O_EXEC_LCT_NOTIFY_MESSAGE) - sizeof(I2O_SG_ELEMENT))
|
|
/ sizeof(U32)) << 4)));
|
|
I2O_MESSAGE_FRAME_setFunction(&(Message_Ptr->StdMessageFrame),
|
|
I2O_EXEC_LCT_NOTIFY);
|
|
I2O_EXEC_LCT_NOTIFY_MESSAGE_setClassIdentifier(Message_Ptr,
|
|
I2O_CLASS_MATCH_ANYCLASS);
|
|
/*
|
|
* Call the LCT table to determine the number of device entries
|
|
* to reserve space for.
|
|
*/
|
|
SG(&(Message_Ptr->SGL), 0,
|
|
I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER, &Table,
|
|
sizeof(I2O_LCT));
|
|
/*
|
|
* since this code is reused in several systems, code efficiency
|
|
* is greater by using a shift operation rather than a divide by
|
|
* sizeof(u_int32_t).
|
|
*/
|
|
I2O_LCT_setTableSize(&Table,
|
|
(sizeof(I2O_LCT) - sizeof(I2O_LCT_ENTRY)) >> 2);
|
|
(void)ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
|
|
/*
|
|
* Determine the size of the LCT table.
|
|
*/
|
|
if (sc->ha_LCT) {
|
|
free (sc->ha_LCT, M_TEMP);
|
|
}
|
|
/*
|
|
* malloc only generates contiguous memory when less than a
|
|
* page is expected. We must break the request up into an SG list ...
|
|
*/
|
|
if (((len = (I2O_LCT_getTableSize(&Table) << 2)) <=
|
|
(sizeof(I2O_LCT) - sizeof(I2O_LCT_ENTRY)))
|
|
|| (len > (128 * 1024))) { /* Arbitrary */
|
|
free (Message_Ptr, M_TEMP);
|
|
return (EINVAL);
|
|
}
|
|
if ((sc->ha_LCT = (PI2O_LCT)malloc (len, M_TEMP, M_WAITOK))
|
|
== (PI2O_LCT)NULL) {
|
|
free (Message_Ptr, M_TEMP);
|
|
return (ENOMEM);
|
|
}
|
|
/*
|
|
* since this code is reused in several systems, code efficiency
|
|
* is greater by using a shift operation rather than a divide by
|
|
* sizeof(u_int32_t).
|
|
*/
|
|
I2O_LCT_setTableSize(sc->ha_LCT,
|
|
(sizeof(I2O_LCT) - sizeof(I2O_LCT_ENTRY)) >> 2);
|
|
/*
|
|
* Convert the access to the LCT table into a SG list.
|
|
*/
|
|
sg = Message_Ptr->SGL.u.Simple;
|
|
v = (caddr_t)(sc->ha_LCT);
|
|
for (;;) {
|
|
int next, base, span;
|
|
|
|
span = 0;
|
|
next = base = KVTOPHYS(v);
|
|
I2O_SGE_SIMPLE_ELEMENT_setPhysicalAddress(sg, base);
|
|
|
|
/* How far can we go contiguously */
|
|
while ((len > 0) && (base == next)) {
|
|
int size;
|
|
|
|
next = trunc_page(base) + PAGE_SIZE;
|
|
size = next - base;
|
|
if (size > len) {
|
|
size = len;
|
|
}
|
|
span += size;
|
|
v += size;
|
|
len -= size;
|
|
base = KVTOPHYS(v);
|
|
}
|
|
|
|
/* Construct the Flags */
|
|
I2O_FLAGS_COUNT_setCount(&(sg->FlagsCount), span);
|
|
{
|
|
int rw = I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT;
|
|
if (len <= 0) {
|
|
rw = (I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT
|
|
| I2O_SGL_FLAGS_LAST_ELEMENT
|
|
| I2O_SGL_FLAGS_END_OF_BUFFER);
|
|
}
|
|
I2O_FLAGS_COUNT_setFlags(&(sg->FlagsCount), rw);
|
|
}
|
|
|
|
if (len <= 0) {
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Incrementing requires resizing of the packet.
|
|
*/
|
|
++sg;
|
|
MessageSizeInBytes += sizeof(*sg);
|
|
I2O_MESSAGE_FRAME_setMessageSize(
|
|
&(Message_Ptr->StdMessageFrame),
|
|
I2O_MESSAGE_FRAME_getMessageSize(
|
|
&(Message_Ptr->StdMessageFrame))
|
|
+ (sizeof(*sg) / sizeof(U32)));
|
|
{
|
|
PI2O_EXEC_LCT_NOTIFY_MESSAGE NewMessage_Ptr;
|
|
|
|
if ((NewMessage_Ptr = (PI2O_EXEC_LCT_NOTIFY_MESSAGE)
|
|
malloc (MessageSizeInBytes, M_TEMP, M_WAITOK))
|
|
== (PI2O_EXEC_LCT_NOTIFY_MESSAGE)NULL) {
|
|
free (sc->ha_LCT, M_TEMP);
|
|
sc->ha_LCT = (PI2O_LCT)NULL;
|
|
free (Message_Ptr, M_TEMP);
|
|
return (ENOMEM);
|
|
}
|
|
span = ((caddr_t)sg) - (caddr_t)Message_Ptr;
|
|
bcopy ((caddr_t)Message_Ptr,
|
|
(caddr_t)NewMessage_Ptr, span);
|
|
free (Message_Ptr, M_TEMP);
|
|
sg = (PI2O_SGE_SIMPLE_ELEMENT)
|
|
(((caddr_t)NewMessage_Ptr) + span);
|
|
Message_Ptr = NewMessage_Ptr;
|
|
}
|
|
}
|
|
{ int retval;
|
|
|
|
retval = ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
|
|
free (Message_Ptr, M_TEMP);
|
|
if (retval != CAM_REQ_CMP) {
|
|
return (ENODEV);
|
|
}
|
|
}
|
|
/* If the LCT table grew, lets truncate accesses */
|
|
if (I2O_LCT_getTableSize(&Table) < I2O_LCT_getTableSize(sc->ha_LCT)) {
|
|
I2O_LCT_setTableSize(sc->ha_LCT, I2O_LCT_getTableSize(&Table));
|
|
}
|
|
for (Entry = sc->ha_LCT->LCTEntry; Entry < (PI2O_LCT_ENTRY)
|
|
(((U32 *)sc->ha_LCT)+I2O_LCT_getTableSize(sc->ha_LCT));
|
|
++Entry) {
|
|
Entry->le_type = I2O_UNKNOWN;
|
|
switch (I2O_CLASS_ID_getClass(&(Entry->ClassID))) {
|
|
|
|
case I2O_CLASS_RANDOM_BLOCK_STORAGE:
|
|
Entry->le_type = I2O_BSA;
|
|
break;
|
|
|
|
case I2O_CLASS_SCSI_PERIPHERAL:
|
|
Entry->le_type = I2O_SCSI;
|
|
break;
|
|
|
|
case I2O_CLASS_FIBRE_CHANNEL_PERIPHERAL:
|
|
Entry->le_type = I2O_FCA;
|
|
break;
|
|
|
|
case I2O_CLASS_BUS_ADAPTER_PORT:
|
|
Entry->le_type = I2O_PORT | I2O_SCSI;
|
|
/* FALLTHRU */
|
|
case I2O_CLASS_FIBRE_CHANNEL_PORT:
|
|
if (I2O_CLASS_ID_getClass(&(Entry->ClassID)) ==
|
|
I2O_CLASS_FIBRE_CHANNEL_PORT) {
|
|
Entry->le_type = I2O_PORT | I2O_FCA;
|
|
}
|
|
{ struct ControllerInfo {
|
|
I2O_PARAM_RESULTS_LIST_HEADER Header;
|
|
I2O_PARAM_READ_OPERATION_RESULT Read;
|
|
I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR Info;
|
|
};
|
|
defAlignLong(struct ControllerInfo, Buffer);
|
|
PI2O_HBA_SCSI_CONTROLLER_INFO_SCALAR Info;
|
|
|
|
Entry->le_bus = 0xff;
|
|
Entry->le_target = 0xff;
|
|
Entry->le_lun = 0xff;
|
|
|
|
if ((Info = (PI2O_HBA_SCSI_CONTROLLER_INFO_SCALAR)
|
|
ASR_getParams(sc,
|
|
I2O_LCT_ENTRY_getLocalTID(Entry),
|
|
I2O_HBA_SCSI_CONTROLLER_INFO_GROUP_NO,
|
|
Buffer, sizeof(struct ControllerInfo)))
|
|
== (PI2O_HBA_SCSI_CONTROLLER_INFO_SCALAR)NULL) {
|
|
continue;
|
|
}
|
|
Entry->le_target
|
|
= I2O_HBA_SCSI_CONTROLLER_INFO_SCALAR_getInitiatorID(
|
|
Info);
|
|
Entry->le_lun = 0;
|
|
} /* FALLTHRU */
|
|
default:
|
|
continue;
|
|
}
|
|
{ struct DeviceInfo {
|
|
I2O_PARAM_RESULTS_LIST_HEADER Header;
|
|
I2O_PARAM_READ_OPERATION_RESULT Read;
|
|
I2O_DPT_DEVICE_INFO_SCALAR Info;
|
|
};
|
|
defAlignLong (struct DeviceInfo, Buffer);
|
|
PI2O_DPT_DEVICE_INFO_SCALAR Info;
|
|
|
|
Entry->le_bus = 0xff;
|
|
Entry->le_target = 0xff;
|
|
Entry->le_lun = 0xff;
|
|
|
|
if ((Info = (PI2O_DPT_DEVICE_INFO_SCALAR)
|
|
ASR_getParams(sc,
|
|
I2O_LCT_ENTRY_getLocalTID(Entry),
|
|
I2O_DPT_DEVICE_INFO_GROUP_NO,
|
|
Buffer, sizeof(struct DeviceInfo)))
|
|
== (PI2O_DPT_DEVICE_INFO_SCALAR)NULL) {
|
|
continue;
|
|
}
|
|
Entry->le_type
|
|
|= I2O_DPT_DEVICE_INFO_SCALAR_getDeviceType(Info);
|
|
Entry->le_bus
|
|
= I2O_DPT_DEVICE_INFO_SCALAR_getBus(Info);
|
|
if ((Entry->le_bus > sc->ha_MaxBus)
|
|
&& (Entry->le_bus <= MAX_CHANNEL)) {
|
|
sc->ha_MaxBus = Entry->le_bus;
|
|
}
|
|
Entry->le_target
|
|
= I2O_DPT_DEVICE_INFO_SCALAR_getIdentifier(Info);
|
|
Entry->le_lun
|
|
= I2O_DPT_DEVICE_INFO_SCALAR_getLunInfo(Info);
|
|
}
|
|
}
|
|
/*
|
|
* A zero return value indicates success.
|
|
*/
|
|
return (0);
|
|
} /* ASR_acquireLct */
|
|
|
|
/*
|
|
* Initialize a message frame.
|
|
* We assume that the CDB has already been set up, so all we do here is
|
|
* generate the Scatter Gather list.
|
|
*/
|
|
STATIC INLINE PI2O_MESSAGE_FRAME
|
|
ASR_init_message(
|
|
IN union asr_ccb * ccb,
|
|
OUT PI2O_MESSAGE_FRAME Message)
|
|
{
|
|
int next, span, base, rw;
|
|
OUT PI2O_MESSAGE_FRAME Message_Ptr;
|
|
Asr_softc_t * sc = (Asr_softc_t *)(ccb->ccb_h.spriv_ptr0);
|
|
PI2O_SGE_SIMPLE_ELEMENT sg;
|
|
caddr_t v;
|
|
vm_size_t size, len;
|
|
U32 MessageSize;
|
|
|
|
/* We only need to zero out the PRIVATE_SCSI_SCB_EXECUTE_MESSAGE */
|
|
bzero (Message_Ptr = getAlignLong(I2O_MESSAGE_FRAME, Message),
|
|
(sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE) - sizeof(I2O_SG_ELEMENT)));
|
|
|
|
{
|
|
int target = ccb->ccb_h.target_id;
|
|
int lun = ccb->ccb_h.target_lun;
|
|
int bus = cam_sim_bus(xpt_path_sim(ccb->ccb_h.path));
|
|
tid_t TID;
|
|
|
|
if ((TID = ASR_getTid (sc, bus, target, lun)) == (tid_t)-1) {
|
|
PI2O_LCT_ENTRY Device;
|
|
|
|
TID = (tid_t)0;
|
|
for (Device = sc->ha_LCT->LCTEntry; Device < (PI2O_LCT_ENTRY)
|
|
(((U32 *)sc->ha_LCT)+I2O_LCT_getTableSize(sc->ha_LCT));
|
|
++Device) {
|
|
if ((Device->le_type != I2O_UNKNOWN)
|
|
&& (Device->le_bus == bus)
|
|
&& (Device->le_target == target)
|
|
&& (Device->le_lun == lun)
|
|
&& (I2O_LCT_ENTRY_getUserTID(Device) == 0xFFF)) {
|
|
TID = I2O_LCT_ENTRY_getLocalTID(Device);
|
|
ASR_setTid (sc, Device->le_bus,
|
|
Device->le_target, Device->le_lun,
|
|
TID);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
if (TID == (tid_t)0) {
|
|
return ((PI2O_MESSAGE_FRAME)NULL);
|
|
}
|
|
I2O_MESSAGE_FRAME_setTargetAddress(Message_Ptr, TID);
|
|
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setTID(
|
|
(PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr, TID);
|
|
}
|
|
I2O_MESSAGE_FRAME_setVersionOffset(Message_Ptr, I2O_VERSION_11 |
|
|
(((sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE) - sizeof(I2O_SG_ELEMENT))
|
|
/ sizeof(U32)) << 4));
|
|
I2O_MESSAGE_FRAME_setMessageSize(Message_Ptr,
|
|
(sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
|
|
- sizeof(I2O_SG_ELEMENT)) / sizeof(U32));
|
|
I2O_MESSAGE_FRAME_setInitiatorAddress (Message_Ptr, 1);
|
|
I2O_MESSAGE_FRAME_setFunction(Message_Ptr, I2O_PRIVATE_MESSAGE);
|
|
I2O_PRIVATE_MESSAGE_FRAME_setXFunctionCode (
|
|
(PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr, I2O_SCSI_SCB_EXEC);
|
|
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (
|
|
(PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr,
|
|
I2O_SCB_FLAG_ENABLE_DISCONNECT
|
|
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
|
|
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER);
|
|
/*
|
|
* We do not need any (optional byteswapping) method access to
|
|
* the Initiator & Transaction context field.
|
|
*/
|
|
I2O_MESSAGE_FRAME_setInitiatorContext64(Message, (long)ccb);
|
|
|
|
I2O_PRIVATE_MESSAGE_FRAME_setOrganizationID(
|
|
(PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr, DPT_ORGANIZATION_ID);
|
|
/*
|
|
* copy the cdb over
|
|
*/
|
|
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setCDBLength(
|
|
(PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr, ccb->csio.cdb_len);
|
|
bcopy (&(ccb->csio.cdb_io),
|
|
((PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr)->CDB, ccb->csio.cdb_len);
|
|
|
|
/*
|
|
* Given a buffer describing a transfer, set up a scatter/gather map
|
|
* in a ccb to map that SCSI transfer.
|
|
*/
|
|
|
|
rw = (ccb->ccb_h.flags & CAM_DIR_IN) ? 0 : I2O_SGL_FLAGS_DIR;
|
|
|
|
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (
|
|
(PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr,
|
|
(ccb->csio.dxfer_len)
|
|
? ((rw) ? (I2O_SCB_FLAG_XFER_TO_DEVICE
|
|
| I2O_SCB_FLAG_ENABLE_DISCONNECT
|
|
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
|
|
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER)
|
|
: (I2O_SCB_FLAG_XFER_FROM_DEVICE
|
|
| I2O_SCB_FLAG_ENABLE_DISCONNECT
|
|
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
|
|
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER))
|
|
: (I2O_SCB_FLAG_ENABLE_DISCONNECT
|
|
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
|
|
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER));
|
|
|
|
/*
|
|
* Given a transfer described by a `data', fill in the SG list.
|
|
*/
|
|
sg = &((PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr)->SGL.u.Simple[0];
|
|
|
|
len = ccb->csio.dxfer_len;
|
|
v = ccb->csio.data_ptr;
|
|
ASSERT (ccb->csio.dxfer_len >= 0);
|
|
MessageSize = I2O_MESSAGE_FRAME_getMessageSize(Message_Ptr);
|
|
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setByteCount(
|
|
(PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr, len);
|
|
while ((len > 0) && (sg < &((PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
|
|
Message_Ptr)->SGL.u.Simple[SG_SIZE])) {
|
|
span = 0;
|
|
next = base = KVTOPHYS(v);
|
|
I2O_SGE_SIMPLE_ELEMENT_setPhysicalAddress(sg, base);
|
|
|
|
/* How far can we go contiguously */
|
|
while ((len > 0) && (base == next)) {
|
|
next = trunc_page(base) + PAGE_SIZE;
|
|
size = next - base;
|
|
if (size > len) {
|
|
size = len;
|
|
}
|
|
span += size;
|
|
v += size;
|
|
len -= size;
|
|
base = KVTOPHYS(v);
|
|
}
|
|
|
|
I2O_FLAGS_COUNT_setCount(&(sg->FlagsCount), span);
|
|
if (len == 0) {
|
|
rw |= I2O_SGL_FLAGS_LAST_ELEMENT;
|
|
}
|
|
I2O_FLAGS_COUNT_setFlags(&(sg->FlagsCount),
|
|
I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT | rw);
|
|
++sg;
|
|
MessageSize += sizeof(*sg) / sizeof(U32);
|
|
}
|
|
/* We always do the request sense ... */
|
|
if ((span = ccb->csio.sense_len) == 0) {
|
|
span = sizeof(ccb->csio.sense_data);
|
|
}
|
|
SG(sg, 0, I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER,
|
|
&(ccb->csio.sense_data), span);
|
|
I2O_MESSAGE_FRAME_setMessageSize(Message_Ptr,
|
|
MessageSize + (sizeof(*sg) / sizeof(U32)));
|
|
return (Message_Ptr);
|
|
} /* ASR_init_message */
|
|
|
|
/*
|
|
* Reset the adapter.
|
|
*/
|
|
STATIC INLINE U32
|
|
ASR_initOutBound (
|
|
INOUT Asr_softc_t * sc)
|
|
{
|
|
struct initOutBoundMessage {
|
|
I2O_EXEC_OUTBOUND_INIT_MESSAGE M;
|
|
U32 R;
|
|
};
|
|
defAlignLong(struct initOutBoundMessage,Message);
|
|
PI2O_EXEC_OUTBOUND_INIT_MESSAGE Message_Ptr;
|
|
OUT U32 * volatile Reply_Ptr;
|
|
U32 Old;
|
|
|
|
/*
|
|
* Build up our copy of the Message.
|
|
*/
|
|
Message_Ptr = (PI2O_EXEC_OUTBOUND_INIT_MESSAGE)ASR_fillMessage(Message,
|
|
sizeof(I2O_EXEC_OUTBOUND_INIT_MESSAGE));
|
|
I2O_MESSAGE_FRAME_setFunction(&(Message_Ptr->StdMessageFrame),
|
|
I2O_EXEC_OUTBOUND_INIT);
|
|
I2O_EXEC_OUTBOUND_INIT_MESSAGE_setHostPageFrameSize(Message_Ptr, PAGE_SIZE);
|
|
I2O_EXEC_OUTBOUND_INIT_MESSAGE_setOutboundMFrameSize(Message_Ptr,
|
|
sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME));
|
|
/*
|
|
* Reset the Reply Status
|
|
*/
|
|
*(Reply_Ptr = (U32 *)((char *)Message_Ptr
|
|
+ sizeof(I2O_EXEC_OUTBOUND_INIT_MESSAGE))) = 0;
|
|
SG (&(Message_Ptr->SGL), 0, I2O_SGL_FLAGS_LAST_ELEMENT, Reply_Ptr,
|
|
sizeof(U32));
|
|
/*
|
|
* Send the Message out
|
|
*/
|
|
if ((Old = ASR_initiateCp (sc->ha_Virt, (PI2O_MESSAGE_FRAME)Message_Ptr)) != (U32)-1L) {
|
|
u_long size, addr;
|
|
|
|
/*
|
|
* Wait for a response (Poll).
|
|
*/
|
|
while (*Reply_Ptr < I2O_EXEC_OUTBOUND_INIT_REJECTED);
|
|
/*
|
|
* Re-enable the interrupts.
|
|
*/
|
|
sc->ha_Virt->Mask = Old;
|
|
/*
|
|
* Populate the outbound table.
|
|
*/
|
|
if (sc->ha_Msgs == (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)NULL) {
|
|
|
|
/* Allocate the reply frames */
|
|
size = sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)
|
|
* sc->ha_Msgs_Count;
|
|
|
|
/*
|
|
* contigmalloc only works reliably at
|
|
* initialization time.
|
|
*/
|
|
if ((sc->ha_Msgs = (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)
|
|
contigmalloc (size, M_DEVBUF, M_WAITOK, 0ul,
|
|
0xFFFFFFFFul, (u_long)sizeof(U32), 0ul))
|
|
!= (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)NULL) {
|
|
(void)bzero ((char *)sc->ha_Msgs, size);
|
|
sc->ha_Msgs_Phys = KVTOPHYS(sc->ha_Msgs);
|
|
}
|
|
}
|
|
|
|
/* Initialize the outbound FIFO */
|
|
if (sc->ha_Msgs != (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)NULL)
|
|
for (size = sc->ha_Msgs_Count, addr = sc->ha_Msgs_Phys;
|
|
size; --size) {
|
|
sc->ha_Virt->FromFIFO = addr;
|
|
addr += sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME);
|
|
}
|
|
return (*Reply_Ptr);
|
|
}
|
|
return (0);
|
|
} /* ASR_initOutBound */
|
|
|
|
/*
|
|
* Set the system table
|
|
*/
|
|
STATIC INLINE int
|
|
ASR_setSysTab(
|
|
IN Asr_softc_t * sc)
|
|
{
|
|
PI2O_EXEC_SYS_TAB_SET_MESSAGE Message_Ptr;
|
|
PI2O_SET_SYSTAB_HEADER SystemTable;
|
|
Asr_softc_t * ha;
|
|
PI2O_SGE_SIMPLE_ELEMENT sg;
|
|
int retVal;
|
|
|
|
if ((SystemTable = (PI2O_SET_SYSTAB_HEADER)malloc (
|
|
sizeof(I2O_SET_SYSTAB_HEADER), M_TEMP, M_WAITOK))
|
|
== (PI2O_SET_SYSTAB_HEADER)NULL) {
|
|
return (ENOMEM);
|
|
}
|
|
bzero (SystemTable, sizeof(I2O_SET_SYSTAB_HEADER));
|
|
for (ha = Asr_softc; ha; ha = ha->ha_next) {
|
|
++SystemTable->NumberEntries;
|
|
}
|
|
if ((Message_Ptr = (PI2O_EXEC_SYS_TAB_SET_MESSAGE)malloc (
|
|
sizeof(I2O_EXEC_SYS_TAB_SET_MESSAGE) - sizeof(I2O_SG_ELEMENT)
|
|
+ ((3+SystemTable->NumberEntries) * sizeof(I2O_SGE_SIMPLE_ELEMENT)),
|
|
M_TEMP, M_WAITOK)) == (PI2O_EXEC_SYS_TAB_SET_MESSAGE)NULL) {
|
|
free (SystemTable, M_TEMP);
|
|
return (ENOMEM);
|
|
}
|
|
(void)ASR_fillMessage((char *)Message_Ptr,
|
|
sizeof(I2O_EXEC_SYS_TAB_SET_MESSAGE) - sizeof(I2O_SG_ELEMENT)
|
|
+ ((3+SystemTable->NumberEntries) * sizeof(I2O_SGE_SIMPLE_ELEMENT)));
|
|
I2O_MESSAGE_FRAME_setVersionOffset(&(Message_Ptr->StdMessageFrame),
|
|
(I2O_VERSION_11 +
|
|
(((sizeof(I2O_EXEC_SYS_TAB_SET_MESSAGE) - sizeof(I2O_SG_ELEMENT))
|
|
/ sizeof(U32)) << 4)));
|
|
I2O_MESSAGE_FRAME_setFunction(&(Message_Ptr->StdMessageFrame),
|
|
I2O_EXEC_SYS_TAB_SET);
|
|
/*
|
|
* Call the LCT table to determine the number of device entries
|
|
* to reserve space for.
|
|
* since this code is reused in several systems, code efficiency
|
|
* is greater by using a shift operation rather than a divide by
|
|
* sizeof(u_int32_t).
|
|
*/
|
|
sg = (PI2O_SGE_SIMPLE_ELEMENT)((char *)Message_Ptr
|
|
+ ((I2O_MESSAGE_FRAME_getVersionOffset(
|
|
&(Message_Ptr->StdMessageFrame)) & 0xF0) >> 2));
|
|
SG(sg, 0, I2O_SGL_FLAGS_DIR, SystemTable, sizeof(I2O_SET_SYSTAB_HEADER));
|
|
++sg;
|
|
for (ha = Asr_softc; ha; ha = ha->ha_next) {
|
|
SG(sg, 0,
|
|
((ha->ha_next)
|
|
? (I2O_SGL_FLAGS_DIR)
|
|
: (I2O_SGL_FLAGS_DIR | I2O_SGL_FLAGS_END_OF_BUFFER)),
|
|
&(ha->ha_SystemTable), sizeof(ha->ha_SystemTable));
|
|
++sg;
|
|
}
|
|
SG(sg, 0, I2O_SGL_FLAGS_DIR | I2O_SGL_FLAGS_END_OF_BUFFER, NULL, 0);
|
|
SG(sg, 1, I2O_SGL_FLAGS_DIR | I2O_SGL_FLAGS_LAST_ELEMENT
|
|
| I2O_SGL_FLAGS_END_OF_BUFFER, NULL, 0);
|
|
retVal = ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
|
|
free (Message_Ptr, M_TEMP);
|
|
free (SystemTable, M_TEMP);
|
|
return (retVal);
|
|
} /* ASR_setSysTab */
|
|
|
|
STATIC INLINE int
|
|
ASR_acquireHrt (
|
|
INOUT Asr_softc_t * sc)
|
|
{
|
|
defAlignLong(I2O_EXEC_HRT_GET_MESSAGE,Message);
|
|
I2O_EXEC_HRT_GET_MESSAGE * Message_Ptr;
|
|
struct {
|
|
I2O_HRT Header;
|
|
I2O_HRT_ENTRY Entry[MAX_CHANNEL];
|
|
} Hrt;
|
|
u_int8_t NumberOfEntries;
|
|
PI2O_HRT_ENTRY Entry;
|
|
|
|
bzero ((void *)&Hrt, sizeof (Hrt));
|
|
Message_Ptr = (I2O_EXEC_HRT_GET_MESSAGE *)ASR_fillMessage(Message,
|
|
sizeof(I2O_EXEC_HRT_GET_MESSAGE) - sizeof(I2O_SG_ELEMENT)
|
|
+ sizeof(I2O_SGE_SIMPLE_ELEMENT));
|
|
I2O_MESSAGE_FRAME_setVersionOffset(&(Message_Ptr->StdMessageFrame),
|
|
(I2O_VERSION_11
|
|
+ (((sizeof(I2O_EXEC_HRT_GET_MESSAGE) - sizeof(I2O_SG_ELEMENT))
|
|
/ sizeof(U32)) << 4)));
|
|
I2O_MESSAGE_FRAME_setFunction (&(Message_Ptr->StdMessageFrame),
|
|
I2O_EXEC_HRT_GET);
|
|
|
|
/*
|
|
* Set up the buffers as scatter gather elements.
|
|
*/
|
|
SG(&(Message_Ptr->SGL), 0,
|
|
I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER,
|
|
&Hrt, sizeof(Hrt));
|
|
if (ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr) != CAM_REQ_CMP) {
|
|
return (ENODEV);
|
|
}
|
|
if ((NumberOfEntries = I2O_HRT_getNumberEntries(&Hrt.Header))
|
|
> (MAX_CHANNEL + 1)) {
|
|
NumberOfEntries = MAX_CHANNEL + 1;
|
|
}
|
|
for (Entry = Hrt.Header.HRTEntry;
|
|
NumberOfEntries != 0;
|
|
++Entry, --NumberOfEntries) {
|
|
PI2O_LCT_ENTRY Device;
|
|
|
|
for (Device = sc->ha_LCT->LCTEntry; Device < (PI2O_LCT_ENTRY)
|
|
(((U32 *)sc->ha_LCT)+I2O_LCT_getTableSize(sc->ha_LCT));
|
|
++Device) {
|
|
if (I2O_LCT_ENTRY_getLocalTID(Device)
|
|
== (I2O_HRT_ENTRY_getAdapterID(Entry) & 0xFFF)) {
|
|
Device->le_bus = I2O_HRT_ENTRY_getAdapterID(
|
|
Entry) >> 16;
|
|
if ((Device->le_bus > sc->ha_MaxBus)
|
|
&& (Device->le_bus <= MAX_CHANNEL)) {
|
|
sc->ha_MaxBus = Device->le_bus;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return (0);
|
|
} /* ASR_acquireHrt */
|
|
|
|
/*
|
|
* Enable the adapter.
|
|
*/
|
|
STATIC INLINE int
|
|
ASR_enableSys (
|
|
IN Asr_softc_t * sc)
|
|
{
|
|
defAlignLong(I2O_EXEC_SYS_ENABLE_MESSAGE,Message);
|
|
PI2O_EXEC_SYS_ENABLE_MESSAGE Message_Ptr;
|
|
|
|
Message_Ptr = (PI2O_EXEC_SYS_ENABLE_MESSAGE)ASR_fillMessage(Message,
|
|
sizeof(I2O_EXEC_SYS_ENABLE_MESSAGE));
|
|
I2O_MESSAGE_FRAME_setFunction(&(Message_Ptr->StdMessageFrame),
|
|
I2O_EXEC_SYS_ENABLE);
|
|
return (ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr) != 0);
|
|
} /* ASR_enableSys */
|
|
|
|
/*
|
|
* Perform the stages necessary to initialize the adapter
|
|
*/
|
|
STATIC int
|
|
ASR_init(
|
|
IN Asr_softc_t * sc)
|
|
{
|
|
return ((ASR_initOutBound(sc) == 0)
|
|
|| (ASR_setSysTab(sc) != CAM_REQ_CMP)
|
|
|| (ASR_enableSys(sc) != CAM_REQ_CMP));
|
|
} /* ASR_init */
|
|
|
|
/*
|
|
* Send a Synchronize Cache command to the target device.
|
|
*/
|
|
STATIC INLINE void
|
|
ASR_sync (
|
|
IN Asr_softc_t * sc,
|
|
IN int bus,
|
|
IN int target,
|
|
IN int lun)
|
|
{
|
|
tid_t TID;
|
|
|
|
/*
|
|
* We will not synchronize the device when there are outstanding
|
|
* commands issued by the OS (this is due to a locked up device,
|
|
* as the OS normally would flush all outstanding commands before
|
|
* issuing a shutdown or an adapter reset).
|
|
*/
|
|
if ((sc != (Asr_softc_t *)NULL)
|
|
&& (sc->ha_ccb.lh_first != (struct ccb_hdr *)NULL)
|
|
&& ((TID = ASR_getTid (sc, bus, target, lun)) != (tid_t)-1)
|
|
&& (TID != (tid_t)0)) {
|
|
defAlignLong(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE,Message);
|
|
PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE Message_Ptr;
|
|
|
|
bzero (Message_Ptr
|
|
= getAlignLong(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE, Message),
|
|
sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
|
|
- sizeof(I2O_SG_ELEMENT) + sizeof(I2O_SGE_SIMPLE_ELEMENT));
|
|
|
|
I2O_MESSAGE_FRAME_setVersionOffset(
|
|
(PI2O_MESSAGE_FRAME)Message_Ptr,
|
|
I2O_VERSION_11
|
|
| (((sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
|
|
- sizeof(I2O_SG_ELEMENT))
|
|
/ sizeof(U32)) << 4));
|
|
I2O_MESSAGE_FRAME_setMessageSize(
|
|
(PI2O_MESSAGE_FRAME)Message_Ptr,
|
|
(sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
|
|
- sizeof(I2O_SG_ELEMENT))
|
|
/ sizeof(U32));
|
|
I2O_MESSAGE_FRAME_setInitiatorAddress (
|
|
(PI2O_MESSAGE_FRAME)Message_Ptr, 1);
|
|
I2O_MESSAGE_FRAME_setFunction(
|
|
(PI2O_MESSAGE_FRAME)Message_Ptr, I2O_PRIVATE_MESSAGE);
|
|
I2O_MESSAGE_FRAME_setTargetAddress(
|
|
(PI2O_MESSAGE_FRAME)Message_Ptr, TID);
|
|
I2O_PRIVATE_MESSAGE_FRAME_setXFunctionCode (
|
|
(PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr,
|
|
I2O_SCSI_SCB_EXEC);
|
|
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setTID(Message_Ptr, TID);
|
|
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (Message_Ptr,
|
|
I2O_SCB_FLAG_ENABLE_DISCONNECT
|
|
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
|
|
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER);
|
|
I2O_PRIVATE_MESSAGE_FRAME_setOrganizationID(
|
|
(PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr,
|
|
DPT_ORGANIZATION_ID);
|
|
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setCDBLength(Message_Ptr, 6);
|
|
Message_Ptr->CDB[0] = SYNCHRONIZE_CACHE;
|
|
Message_Ptr->CDB[1] = (lun << 5);
|
|
|
|
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (Message_Ptr,
|
|
(I2O_SCB_FLAG_XFER_FROM_DEVICE
|
|
| I2O_SCB_FLAG_ENABLE_DISCONNECT
|
|
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
|
|
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER));
|
|
|
|
(void)ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
|
|
|
|
}
|
|
}
|
|
|
|
STATIC INLINE void
|
|
ASR_synchronize (
|
|
IN Asr_softc_t * sc)
|
|
{
|
|
int bus, target, lun;
|
|
|
|
for (bus = 0; bus <= sc->ha_MaxBus; ++bus) {
|
|
for (target = 0; target <= sc->ha_MaxId; ++target) {
|
|
for (lun = 0; lun <= sc->ha_MaxLun; ++lun) {
|
|
ASR_sync(sc,bus,target,lun);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Reset the HBA, targets and BUS.
|
|
* Currently this resets *all* the SCSI busses.
|
|
*/
|
|
STATIC INLINE void
|
|
asr_hbareset(
|
|
IN Asr_softc_t * sc)
|
|
{
|
|
ASR_synchronize (sc);
|
|
ASR_reset (sc);
|
|
} /* asr_hbareset */
|
|
|
|
/*
|
|
* A reduced copy of the real pci_map_mem, incorporating the MAX_MAP
|
|
* limit and a reduction in error checking (in the pre 4.0 case).
|
|
*/
|
|
STATIC int
|
|
asr_pci_map_mem (
|
|
#if __FreeBSD_version >= 400000
|
|
IN device_t tag,
|
|
#else
|
|
IN pcici_t tag,
|
|
#endif
|
|
IN Asr_softc_t * sc)
|
|
{
|
|
int rid;
|
|
u_int32_t p, l;
|
|
|
|
#if __FreeBSD_version >= 400000
|
|
/*
|
|
* I2O specification says we must find first *memory* mapped BAR
|
|
*/
|
|
for (rid = PCIR_MAPS;
|
|
rid < (PCIR_MAPS + 4 * sizeof(u_int32_t));
|
|
++rid) {
|
|
p = pci_read_config(tag, rid, sizeof(p));
|
|
if ((p & 1) == 0) {
|
|
break;
|
|
}
|
|
}
|
|
/*
|
|
* Give up?
|
|
*/
|
|
if (rid >= (PCIR_MAPS + 4 * sizeof(u_int32_t))) {
|
|
rid = PCIR_MAPS;
|
|
}
|
|
p = pci_read_config(tag, rid, sizeof(p));
|
|
pci_write_config(tag, rid, -1, sizeof(p));
|
|
l = 0 - (pci_read_config(tag, rid, sizeof(l)) & ~15);
|
|
pci_write_config(tag, rid, p, sizeof(p));
|
|
if (l > MAX_MAP) {
|
|
l = MAX_MAP;
|
|
}
|
|
p &= ~15;
|
|
sc->ha_mem_res = bus_alloc_resource(tag, SYS_RES_MEMORY, &rid,
|
|
p, p + l, l, RF_ACTIVE);
|
|
if (sc->ha_mem_res == (struct resource *)NULL) {
|
|
return (0);
|
|
}
|
|
sc->ha_Base = (void *)rman_get_start(sc->ha_mem_res);
|
|
if (sc->ha_Base == (void *)NULL) {
|
|
return (0);
|
|
}
|
|
sc->ha_Virt = (i2oRegs_t *) rman_get_virtual(sc->ha_mem_res);
|
|
#else
|
|
vm_size_t psize, poffs;
|
|
|
|
/*
|
|
* I2O specification says we must find first *memory* mapped BAR
|
|
*/
|
|
for (rid = PCI_MAP_REG_START;
|
|
rid < (PCI_MAP_REG_START + 4 * sizeof(u_int32_t));
|
|
++rid) {
|
|
p = pci_conf_read (tag, rid);
|
|
if ((p & 1) == 0) {
|
|
break;
|
|
}
|
|
}
|
|
if (rid >= (PCI_MAP_REG_START + 4 * sizeof(u_int32_t))) {
|
|
rid = PCI_MAP_REG_START;
|
|
}
|
|
/*
|
|
** save old mapping, get size and type of memory
|
|
**
|
|
** type is in the lowest four bits.
|
|
** If device requires 2^n bytes, the next
|
|
** n-4 bits are read as 0.
|
|
*/
|
|
|
|
sc->ha_Base = (void *)((p = pci_conf_read (tag, rid))
|
|
& PCI_MAP_MEMORY_ADDRESS_MASK);
|
|
pci_conf_write (tag, rid, 0xfffffffful);
|
|
l = pci_conf_read (tag, rid);
|
|
pci_conf_write (tag, rid, p);
|
|
|
|
/*
|
|
** check the type
|
|
*/
|
|
|
|
if (!((l & PCI_MAP_MEMORY_TYPE_MASK) == PCI_MAP_MEMORY_TYPE_32BIT_1M
|
|
&& ((u_long)sc->ha_Base & ~0xfffff) == 0)
|
|
&& ((l & PCI_MAP_MEMORY_TYPE_MASK) != PCI_MAP_MEMORY_TYPE_32BIT)) {
|
|
debug_asr_printf (
|
|
"asr_pci_map_mem failed: bad memory type=0x%x\n",
|
|
(unsigned) l);
|
|
return (0);
|
|
};
|
|
|
|
/*
|
|
** get the size.
|
|
*/
|
|
|
|
psize = -(l & PCI_MAP_MEMORY_ADDRESS_MASK);
|
|
if (psize > MAX_MAP) {
|
|
psize = MAX_MAP;
|
|
}
|
|
|
|
if ((sc->ha_Base == (void *)NULL)
|
|
|| (sc->ha_Base == (void *)PCI_MAP_MEMORY_ADDRESS_MASK)) {
|
|
debug_asr_printf ("asr_pci_map_mem: not configured by bios.\n");
|
|
return (0);
|
|
};
|
|
|
|
/*
|
|
** Truncate sc->ha_Base to page boundary.
|
|
** (Or does pmap_mapdev the job?)
|
|
*/
|
|
|
|
poffs = (u_long)sc->ha_Base - trunc_page ((u_long)sc->ha_Base);
|
|
sc->ha_Virt = (i2oRegs_t *)pmap_mapdev ((u_long)sc->ha_Base - poffs,
|
|
psize + poffs);
|
|
|
|
if (sc->ha_Virt == (i2oRegs_t *)NULL) {
|
|
return (0);
|
|
}
|
|
|
|
sc->ha_Virt = (i2oRegs_t *)((u_long)sc->ha_Virt + poffs);
|
|
#endif
|
|
return (1);
|
|
} /* asr_pci_map_mem */
|
|
|
|
/*
|
|
* A simplified copy of the real pci_map_int with additional
|
|
* registration requirements.
|
|
*/
|
|
STATIC int
|
|
asr_pci_map_int (
|
|
#if __FreeBSD_version >= 400000
|
|
IN device_t tag,
|
|
#else
|
|
IN pcici_t tag,
|
|
#endif
|
|
IN Asr_softc_t * sc)
|
|
{
|
|
#if __FreeBSD_version >= 400000
|
|
int rid = 0;
|
|
|
|
sc->ha_irq_res = bus_alloc_resource(tag, SYS_RES_IRQ, &rid,
|
|
0, ~0, 1, RF_ACTIVE | RF_SHAREABLE);
|
|
if (sc->ha_irq_res == (struct resource *)NULL) {
|
|
return (0);
|
|
}
|
|
if (bus_setup_intr(tag, sc->ha_irq_res, INTR_TYPE_CAM,
|
|
(driver_intr_t *)asr_intr, (void *)sc, &(sc->ha_intr))) {
|
|
return (0);
|
|
}
|
|
sc->ha_irq = pci_read_config(tag, PCIR_INTLINE, sizeof(char));
|
|
#else
|
|
if (!pci_map_int(tag, (pci_inthand_t *)asr_intr,
|
|
(void *)sc, &cam_imask)) {
|
|
return (0);
|
|
}
|
|
sc->ha_irq = pci_conf_read(tag, PCIR_INTLINE);
|
|
#endif
|
|
return (1);
|
|
} /* asr_pci_map_int */
|
|
|
|
/*
|
|
* Attach the devices, and virtual devices to the driver list.
|
|
*/
|
|
STATIC ATTACH_RET
|
|
asr_attach (ATTACH_ARGS)
|
|
{
|
|
Asr_softc_t * sc;
|
|
struct scsi_inquiry_data * iq;
|
|
ATTACH_SET();
|
|
|
|
if ((sc = malloc(sizeof(*sc), M_DEVBUF, M_NOWAIT)) == (Asr_softc_t *)NULL) {
|
|
ATTACH_RETURN(ENOMEM);
|
|
}
|
|
if (Asr_softc == (Asr_softc_t *)NULL) {
|
|
/*
|
|
* Fixup the OS revision as saved in the dptsig for the
|
|
* engine (dptioctl.h) to pick up.
|
|
*/
|
|
bcopy (osrelease, &ASR_sig.dsDescription[16], 5);
|
|
printf ("asr%d: major=%d\n", unit, asr_cdevsw.d_maj);
|
|
}
|
|
/*
|
|
* Initialize the software structure
|
|
*/
|
|
bzero (sc, sizeof(*sc));
|
|
LIST_INIT(&sc->ha_ccb);
|
|
# ifdef ASR_MEASURE_PERFORMANCE
|
|
{
|
|
u_int32_t i;
|
|
|
|
// initialize free list for timeQ
|
|
sc->ha_timeQFreeHead = 0;
|
|
sc->ha_timeQFreeTail = MAX_TIMEQ_SIZE - 1;
|
|
for (i = 0; i < MAX_TIMEQ_SIZE; i++) {
|
|
sc->ha_timeQFreeList[i] = i;
|
|
}
|
|
}
|
|
# endif
|
|
/* Link us into the HA list */
|
|
{
|
|
Asr_softc_t **ha;
|
|
|
|
for (ha = &Asr_softc; *ha; ha = &((*ha)->ha_next));
|
|
*(ha) = sc;
|
|
}
|
|
{
|
|
PI2O_EXEC_STATUS_GET_REPLY status;
|
|
int size;
|
|
|
|
/*
|
|
* This is the real McCoy!
|
|
*/
|
|
if (!asr_pci_map_mem(tag, sc)) {
|
|
printf ("asr%d: could not map memory\n", unit);
|
|
ATTACH_RETURN(ENXIO);
|
|
}
|
|
/* Enable if not formerly enabled */
|
|
#if __FreeBSD_version >= 400000
|
|
pci_write_config (tag, PCIR_COMMAND,
|
|
pci_read_config (tag, PCIR_COMMAND, sizeof(char))
|
|
| PCIM_CMD_MEMEN | PCIM_CMD_BUSMASTEREN, sizeof(char));
|
|
/* Knowledge is power, responsibility is direct */
|
|
{
|
|
struct pci_devinfo {
|
|
STAILQ_ENTRY(pci_devinfo) pci_links;
|
|
struct resource_list resources;
|
|
pcicfgregs cfg;
|
|
} * dinfo = device_get_ivars(tag);
|
|
sc->ha_pciBusNum = dinfo->cfg.bus;
|
|
sc->ha_pciDeviceNum = (dinfo->cfg.slot << 3)
|
|
| dinfo->cfg.func;
|
|
}
|
|
#else
|
|
pci_conf_write (tag, PCIR_COMMAND,
|
|
pci_conf_read (tag, PCIR_COMMAND)
|
|
| PCIM_CMD_MEMEN | PCIM_CMD_BUSMASTEREN);
|
|
/* Knowledge is power, responsibility is direct */
|
|
switch (pci_mechanism) {
|
|
|
|
case 1:
|
|
sc->ha_pciBusNum = tag.cfg1 >> 16;
|
|
sc->ha_pciDeviceNum = tag.cfg1 >> 8;
|
|
|
|
case 2:
|
|
sc->ha_pciBusNum = tag.cfg2.forward;
|
|
sc->ha_pciDeviceNum = ((tag.cfg2.enable >> 1) & 7)
|
|
| (tag.cfg2.port >> 5);
|
|
}
|
|
#endif
|
|
/* Check if the device is there? */
|
|
if ((ASR_resetIOP(sc->ha_Virt) == 0)
|
|
|| ((status = (PI2O_EXEC_STATUS_GET_REPLY)malloc (
|
|
sizeof(I2O_EXEC_STATUS_GET_REPLY), M_TEMP, M_WAITOK))
|
|
== (PI2O_EXEC_STATUS_GET_REPLY)NULL)
|
|
|| (ASR_getStatus(sc->ha_Virt, status) == NULL)) {
|
|
printf ("asr%d: could not initialize hardware\n", unit);
|
|
ATTACH_RETURN(ENODEV); /* Get next, maybe better luck */
|
|
}
|
|
sc->ha_SystemTable.OrganizationID = status->OrganizationID;
|
|
sc->ha_SystemTable.IOP_ID = status->IOP_ID;
|
|
sc->ha_SystemTable.I2oVersion = status->I2oVersion;
|
|
sc->ha_SystemTable.IopState = status->IopState;
|
|
sc->ha_SystemTable.MessengerType = status->MessengerType;
|
|
sc->ha_SystemTable.InboundMessageFrameSize
|
|
= status->InboundMFrameSize;
|
|
sc->ha_SystemTable.MessengerInfo.InboundMessagePortAddressLow
|
|
= (U32)(sc->ha_Base) + (U32)(&(((i2oRegs_t *)NULL)->ToFIFO));
|
|
|
|
if (!asr_pci_map_int(tag, (void *)sc)) {
|
|
printf ("asr%d: could not map interrupt\n", unit);
|
|
ATTACH_RETURN(ENXIO);
|
|
}
|
|
|
|
/* Adjust the maximim inbound count */
|
|
if (((sc->ha_QueueSize
|
|
= I2O_EXEC_STATUS_GET_REPLY_getMaxInboundMFrames(status))
|
|
> MAX_INBOUND)
|
|
|| (sc->ha_QueueSize == 0)) {
|
|
sc->ha_QueueSize = MAX_INBOUND;
|
|
}
|
|
|
|
/* Adjust the maximum outbound count */
|
|
if (((sc->ha_Msgs_Count
|
|
= I2O_EXEC_STATUS_GET_REPLY_getMaxOutboundMFrames(status))
|
|
> MAX_OUTBOUND)
|
|
|| (sc->ha_Msgs_Count == 0)) {
|
|
sc->ha_Msgs_Count = MAX_OUTBOUND;
|
|
}
|
|
if (sc->ha_Msgs_Count > sc->ha_QueueSize) {
|
|
sc->ha_Msgs_Count = sc->ha_QueueSize;
|
|
}
|
|
|
|
/* Adjust the maximum SG size to adapter */
|
|
if ((size = (I2O_EXEC_STATUS_GET_REPLY_getInboundMFrameSize(
|
|
status) << 2)) > MAX_INBOUND_SIZE) {
|
|
size = MAX_INBOUND_SIZE;
|
|
}
|
|
free (status, M_TEMP);
|
|
sc->ha_SgSize = (size - sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
|
|
+ sizeof(I2O_SG_ELEMENT)) / sizeof(I2O_SGE_SIMPLE_ELEMENT);
|
|
}
|
|
|
|
/*
|
|
* Only do a bus/HBA reset on the first time through. On this
|
|
* first time through, we do not send a flush to the devices.
|
|
*/
|
|
if (ASR_init(sc) == 0) {
|
|
struct BufferInfo {
|
|
I2O_PARAM_RESULTS_LIST_HEADER Header;
|
|
I2O_PARAM_READ_OPERATION_RESULT Read;
|
|
I2O_DPT_EXEC_IOP_BUFFERS_SCALAR Info;
|
|
};
|
|
defAlignLong (struct BufferInfo, Buffer);
|
|
PI2O_DPT_EXEC_IOP_BUFFERS_SCALAR Info;
|
|
# define FW_DEBUG_BLED_OFFSET 8
|
|
|
|
if ((Info = (PI2O_DPT_EXEC_IOP_BUFFERS_SCALAR)
|
|
ASR_getParams(sc, 0,
|
|
I2O_DPT_EXEC_IOP_BUFFERS_GROUP_NO,
|
|
Buffer, sizeof(struct BufferInfo)))
|
|
!= (PI2O_DPT_EXEC_IOP_BUFFERS_SCALAR)NULL) {
|
|
sc->ha_blinkLED = sc->ha_Virt->Address
|
|
+ I2O_DPT_EXEC_IOP_BUFFERS_SCALAR_getSerialOutputOffset(Info)
|
|
+ FW_DEBUG_BLED_OFFSET;
|
|
}
|
|
if (ASR_acquireLct(sc) == 0) {
|
|
(void)ASR_acquireHrt(sc);
|
|
}
|
|
} else {
|
|
printf ("asr%d: failed to initialize\n", unit);
|
|
ATTACH_RETURN(ENXIO);
|
|
}
|
|
/*
|
|
* Add in additional probe responses for more channels. We
|
|
* are reusing the variable `target' for a channel loop counter.
|
|
* Done here because of we need both the acquireLct and
|
|
* acquireHrt data.
|
|
*/
|
|
{ PI2O_LCT_ENTRY Device;
|
|
|
|
for (Device = sc->ha_LCT->LCTEntry; Device < (PI2O_LCT_ENTRY)
|
|
(((U32 *)sc->ha_LCT)+I2O_LCT_getTableSize(sc->ha_LCT));
|
|
++Device) {
|
|
if (Device->le_type == I2O_UNKNOWN) {
|
|
continue;
|
|
}
|
|
if (I2O_LCT_ENTRY_getUserTID(Device) == 0xFFF) {
|
|
if (Device->le_target > sc->ha_MaxId) {
|
|
sc->ha_MaxId = Device->le_target;
|
|
}
|
|
if (Device->le_lun > sc->ha_MaxLun) {
|
|
sc->ha_MaxLun = Device->le_lun;
|
|
}
|
|
}
|
|
if (((Device->le_type & I2O_PORT) != 0)
|
|
&& (Device->le_bus <= MAX_CHANNEL)) {
|
|
/* Do not increase MaxId for efficiency */
|
|
sc->ha_adapter_target[Device->le_bus]
|
|
= Device->le_target;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* Print the HBA model number as inquired from the card.
|
|
*/
|
|
|
|
printf ("asr%d:", unit);
|
|
|
|
if ((iq = (struct scsi_inquiry_data *)malloc (
|
|
sizeof(struct scsi_inquiry_data), M_TEMP, M_WAITOK))
|
|
!= (struct scsi_inquiry_data *)NULL) {
|
|
defAlignLong(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE,Message);
|
|
PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE Message_Ptr;
|
|
int posted = 0;
|
|
|
|
bzero (iq, sizeof(struct scsi_inquiry_data));
|
|
bzero (Message_Ptr
|
|
= getAlignLong(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE, Message),
|
|
sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
|
|
- sizeof(I2O_SG_ELEMENT) + sizeof(I2O_SGE_SIMPLE_ELEMENT));
|
|
|
|
I2O_MESSAGE_FRAME_setVersionOffset(
|
|
(PI2O_MESSAGE_FRAME)Message_Ptr,
|
|
I2O_VERSION_11
|
|
| (((sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
|
|
- sizeof(I2O_SG_ELEMENT))
|
|
/ sizeof(U32)) << 4));
|
|
I2O_MESSAGE_FRAME_setMessageSize(
|
|
(PI2O_MESSAGE_FRAME)Message_Ptr,
|
|
(sizeof(PRIVATE_SCSI_SCB_EXECUTE_MESSAGE)
|
|
- sizeof(I2O_SG_ELEMENT) + sizeof(I2O_SGE_SIMPLE_ELEMENT))
|
|
/ sizeof(U32));
|
|
I2O_MESSAGE_FRAME_setInitiatorAddress (
|
|
(PI2O_MESSAGE_FRAME)Message_Ptr, 1);
|
|
I2O_MESSAGE_FRAME_setFunction(
|
|
(PI2O_MESSAGE_FRAME)Message_Ptr, I2O_PRIVATE_MESSAGE);
|
|
I2O_PRIVATE_MESSAGE_FRAME_setXFunctionCode (
|
|
(PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr,
|
|
I2O_SCSI_SCB_EXEC);
|
|
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (Message_Ptr,
|
|
I2O_SCB_FLAG_ENABLE_DISCONNECT
|
|
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
|
|
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER);
|
|
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setInterpret(Message_Ptr, 1);
|
|
I2O_PRIVATE_MESSAGE_FRAME_setOrganizationID(
|
|
(PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr,
|
|
DPT_ORGANIZATION_ID);
|
|
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setCDBLength(Message_Ptr, 6);
|
|
Message_Ptr->CDB[0] = INQUIRY;
|
|
Message_Ptr->CDB[4] = (unsigned char)sizeof(struct scsi_inquiry_data);
|
|
if (Message_Ptr->CDB[4] == 0) {
|
|
Message_Ptr->CDB[4] = 255;
|
|
}
|
|
|
|
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setSCBFlags (Message_Ptr,
|
|
(I2O_SCB_FLAG_XFER_FROM_DEVICE
|
|
| I2O_SCB_FLAG_ENABLE_DISCONNECT
|
|
| I2O_SCB_FLAG_SIMPLE_QUEUE_TAG
|
|
| I2O_SCB_FLAG_SENSE_DATA_IN_BUFFER));
|
|
|
|
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_setByteCount(
|
|
(PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr,
|
|
sizeof(struct scsi_inquiry_data));
|
|
SG(&(Message_Ptr->SGL), 0,
|
|
I2O_SGL_FLAGS_LAST_ELEMENT | I2O_SGL_FLAGS_END_OF_BUFFER,
|
|
iq, sizeof(struct scsi_inquiry_data));
|
|
(void)ASR_queue_c(sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
|
|
|
|
if (iq->vendor[0] && (iq->vendor[0] != ' ')) {
|
|
printf (" ");
|
|
ASR_prstring (iq->vendor, 8);
|
|
++posted;
|
|
}
|
|
if (iq->product[0] && (iq->product[0] != ' ')) {
|
|
printf (" ");
|
|
ASR_prstring (iq->product, 16);
|
|
++posted;
|
|
}
|
|
if (iq->revision[0] && (iq->revision[0] != ' ')) {
|
|
printf (" FW Rev. ");
|
|
ASR_prstring (iq->revision, 4);
|
|
++posted;
|
|
}
|
|
free ((caddr_t)iq, M_TEMP);
|
|
if (posted) {
|
|
printf (",");
|
|
}
|
|
}
|
|
printf (" %d channel, %d CCBs, Protocol I2O\n", sc->ha_MaxBus + 1,
|
|
(sc->ha_QueueSize > MAX_INBOUND) ? MAX_INBOUND : sc->ha_QueueSize);
|
|
|
|
/*
|
|
* fill in the prototype cam_path.
|
|
*/
|
|
{
|
|
int bus;
|
|
union asr_ccb * ccb;
|
|
|
|
if ((ccb = asr_alloc_ccb (sc)) == (union asr_ccb *)NULL) {
|
|
printf ("asr%d: CAM could not be notified of asynchronous callback parameters\n", unit);
|
|
ATTACH_RETURN(ENOMEM);
|
|
}
|
|
for (bus = 0; bus <= sc->ha_MaxBus; ++bus) {
|
|
struct cam_devq * devq;
|
|
int QueueSize = sc->ha_QueueSize;
|
|
|
|
if (QueueSize > MAX_INBOUND) {
|
|
QueueSize = MAX_INBOUND;
|
|
}
|
|
|
|
/*
|
|
* Create the device queue for our SIM(s).
|
|
*/
|
|
if ((devq = cam_simq_alloc(QueueSize)) == NULL) {
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* Construct our first channel SIM entry
|
|
*/
|
|
sc->ha_sim[bus] = cam_sim_alloc(
|
|
asr_action, asr_poll, "asr", sc,
|
|
unit, 1, QueueSize, devq);
|
|
if (sc->ha_sim[bus] == NULL) {
|
|
continue;
|
|
}
|
|
|
|
if (xpt_bus_register(sc->ha_sim[bus], bus)
|
|
!= CAM_SUCCESS) {
|
|
cam_sim_free(sc->ha_sim[bus],
|
|
/*free_devq*/TRUE);
|
|
sc->ha_sim[bus] = NULL;
|
|
continue;
|
|
}
|
|
|
|
if (xpt_create_path(&(sc->ha_path[bus]), /*periph*/NULL,
|
|
cam_sim_path(sc->ha_sim[bus]), CAM_TARGET_WILDCARD,
|
|
CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
|
|
xpt_bus_deregister(
|
|
cam_sim_path(sc->ha_sim[bus]));
|
|
cam_sim_free(sc->ha_sim[bus],
|
|
/*free_devq*/TRUE);
|
|
sc->ha_sim[bus] = NULL;
|
|
continue;
|
|
}
|
|
xpt_setup_ccb(&(ccb->ccb_h),
|
|
sc->ha_path[bus], /*priority*/5);
|
|
ccb->ccb_h.func_code = XPT_SASYNC_CB;
|
|
ccb->csa.event_enable = AC_LOST_DEVICE;
|
|
ccb->csa.callback = asr_async;
|
|
ccb->csa.callback_arg = sc->ha_sim[bus];
|
|
xpt_action((union ccb *)ccb);
|
|
}
|
|
asr_free_ccb (ccb);
|
|
}
|
|
/*
|
|
* Generate the device node information
|
|
*/
|
|
(void)make_dev(&asr_cdevsw, unit, 0, 0, S_IRWXU, "rasr%d", unit);
|
|
destroy_dev(makedev(asr_cdevsw.d_maj,unit+1));
|
|
ATTACH_RETURN(0);
|
|
} /* asr_attach */
|
|
|
|
#if (!defined(UNREFERENCED_PARAMETER))
|
|
# define UNREFERENCED_PARAMETER(x) (void)(x)
|
|
#endif
|
|
|
|
STATIC void
|
|
asr_async(
|
|
void * callback_arg,
|
|
u_int32_t code,
|
|
struct cam_path * path,
|
|
void * arg)
|
|
{
|
|
UNREFERENCED_PARAMETER(callback_arg);
|
|
UNREFERENCED_PARAMETER(code);
|
|
UNREFERENCED_PARAMETER(path);
|
|
UNREFERENCED_PARAMETER(arg);
|
|
} /* asr_async */
|
|
|
|
STATIC void
|
|
asr_poll(
|
|
IN struct cam_sim *sim)
|
|
{
|
|
asr_intr(cam_sim_softc(sim));
|
|
} /* asr_poll */
|
|
|
|
STATIC void
|
|
asr_action(
|
|
IN struct cam_sim * sim,
|
|
IN union ccb * ccb)
|
|
{
|
|
struct Asr_softc * sc;
|
|
|
|
debug_asr_printf ("asr_action(%lx,%lx{%x})\n",
|
|
(u_long)sim, (u_long)ccb, ccb->ccb_h.func_code);
|
|
|
|
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("asr_action\n"));
|
|
|
|
ccb->ccb_h.spriv_ptr0 = sc = (struct Asr_softc *)cam_sim_softc(sim);
|
|
|
|
switch (ccb->ccb_h.func_code) {
|
|
|
|
/* Common cases first */
|
|
case XPT_SCSI_IO: /* Execute the requested I/O operation */
|
|
{
|
|
struct Message {
|
|
char M[MAX_INBOUND_SIZE];
|
|
};
|
|
defAlignLong(struct Message,Message);
|
|
PI2O_MESSAGE_FRAME Message_Ptr;
|
|
|
|
if (ccb->ccb_h.status != CAM_REQ_INPROG) {
|
|
printf(
|
|
"asr%d WARNING: scsi_cmd(%x) already done on b%dt%du%d\n",
|
|
cam_sim_unit(xpt_path_sim(ccb->ccb_h.path)),
|
|
ccb->csio.cdb_io.cdb_bytes[0],
|
|
cam_sim_bus(sim),
|
|
ccb->ccb_h.target_id,
|
|
ccb->ccb_h.target_lun);
|
|
}
|
|
debug_asr_cmd_printf ("(%d,%d,%d,%d)",
|
|
cam_sim_unit(sim),
|
|
cam_sim_bus(sim),
|
|
ccb->ccb_h.target_id,
|
|
ccb->ccb_h.target_lun);
|
|
debug_asr_cmd_dump_ccb(ccb);
|
|
|
|
if ((Message_Ptr = ASR_init_message ((union asr_ccb *)ccb,
|
|
(PI2O_MESSAGE_FRAME)Message)) != (PI2O_MESSAGE_FRAME)NULL) {
|
|
debug_asr_cmd2_printf ("TID=%x:\n",
|
|
PRIVATE_SCSI_SCB_EXECUTE_MESSAGE_getTID(
|
|
(PPRIVATE_SCSI_SCB_EXECUTE_MESSAGE)Message_Ptr));
|
|
debug_asr_cmd2_dump_message(Message_Ptr);
|
|
debug_asr_cmd1_printf (" q");
|
|
|
|
if (ASR_queue (sc, Message_Ptr) == EMPTY_QUEUE) {
|
|
#ifdef ASR_MEASURE_PERFORMANCE
|
|
++sc->ha_performance.command_too_busy;
|
|
#endif
|
|
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
|
|
ccb->ccb_h.status |= CAM_REQUEUE_REQ;
|
|
debug_asr_cmd_printf (" E\n");
|
|
xpt_done(ccb);
|
|
}
|
|
debug_asr_cmd_printf (" Q\n");
|
|
break;
|
|
}
|
|
/*
|
|
* We will get here if there is no valid TID for the device
|
|
* referenced in the scsi command packet.
|
|
*/
|
|
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
|
|
ccb->ccb_h.status |= CAM_SEL_TIMEOUT;
|
|
debug_asr_cmd_printf (" B\n");
|
|
xpt_done(ccb);
|
|
break;
|
|
}
|
|
|
|
case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */
|
|
/* Rese HBA device ... */
|
|
asr_hbareset (sc);
|
|
ccb->ccb_h.status = CAM_REQ_CMP;
|
|
xpt_done(ccb);
|
|
break;
|
|
|
|
# if (defined(REPORT_LUNS))
|
|
case REPORT_LUNS:
|
|
# endif
|
|
case XPT_ABORT: /* Abort the specified CCB */
|
|
/* XXX Implement */
|
|
ccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(ccb);
|
|
break;
|
|
|
|
case XPT_SET_TRAN_SETTINGS:
|
|
/* XXX Implement */
|
|
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
|
|
xpt_done(ccb);
|
|
break;
|
|
|
|
case XPT_GET_TRAN_SETTINGS:
|
|
/* Get default/user set transfer settings for the target */
|
|
{
|
|
struct ccb_trans_settings *cts;
|
|
u_int target_mask;
|
|
|
|
cts = &ccb->cts;
|
|
target_mask = 0x01 << ccb->ccb_h.target_id;
|
|
if ((cts->flags & CCB_TRANS_USER_SETTINGS) != 0) {
|
|
cts->flags = CCB_TRANS_DISC_ENB|CCB_TRANS_TAG_ENB;
|
|
cts->bus_width = MSG_EXT_WDTR_BUS_16_BIT;
|
|
cts->sync_period = 6; /* 40MHz */
|
|
cts->sync_offset = 15;
|
|
|
|
cts->valid = CCB_TRANS_SYNC_RATE_VALID
|
|
| CCB_TRANS_SYNC_OFFSET_VALID
|
|
| CCB_TRANS_BUS_WIDTH_VALID
|
|
| CCB_TRANS_DISC_VALID
|
|
| CCB_TRANS_TQ_VALID;
|
|
ccb->ccb_h.status = CAM_REQ_CMP;
|
|
} else {
|
|
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
|
|
}
|
|
xpt_done(ccb);
|
|
break;
|
|
}
|
|
|
|
case XPT_CALC_GEOMETRY:
|
|
{
|
|
struct ccb_calc_geometry *ccg;
|
|
u_int32_t size_mb;
|
|
u_int32_t secs_per_cylinder;
|
|
|
|
ccg = &ccb->ccg;
|
|
size_mb = ccg->volume_size
|
|
/ ((1024L * 1024L) / ccg->block_size);
|
|
|
|
if (size_mb > 4096) {
|
|
ccg->heads = 255;
|
|
ccg->secs_per_track = 63;
|
|
} else if (size_mb > 2048) {
|
|
ccg->heads = 128;
|
|
ccg->secs_per_track = 63;
|
|
} else if (size_mb > 1024) {
|
|
ccg->heads = 65;
|
|
ccg->secs_per_track = 63;
|
|
} else {
|
|
ccg->heads = 64;
|
|
ccg->secs_per_track = 32;
|
|
}
|
|
secs_per_cylinder = ccg->heads * ccg->secs_per_track;
|
|
ccg->cylinders = ccg->volume_size / secs_per_cylinder;
|
|
ccb->ccb_h.status = CAM_REQ_CMP;
|
|
xpt_done(ccb);
|
|
break;
|
|
}
|
|
|
|
case XPT_RESET_BUS: /* Reset the specified SCSI bus */
|
|
ASR_resetBus (sc, cam_sim_bus(sim));
|
|
ccb->ccb_h.status = CAM_REQ_CMP;
|
|
xpt_done(ccb);
|
|
break;
|
|
|
|
case XPT_TERM_IO: /* Terminate the I/O process */
|
|
/* XXX Implement */
|
|
ccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(ccb);
|
|
break;
|
|
|
|
case XPT_PATH_INQ: /* Path routing inquiry */
|
|
{
|
|
struct ccb_pathinq *cpi = &ccb->cpi;
|
|
|
|
cpi->version_num = 1; /* XXX??? */
|
|
cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16;
|
|
cpi->target_sprt = 0;
|
|
/* Not necessary to reset bus, done by HDM initialization */
|
|
cpi->hba_misc = PIM_NOBUSRESET;
|
|
cpi->hba_eng_cnt = 0;
|
|
cpi->max_target = sc->ha_MaxId;
|
|
cpi->max_lun = sc->ha_MaxLun;
|
|
cpi->initiator_id = sc->ha_adapter_target[cam_sim_bus(sim)];
|
|
cpi->bus_id = cam_sim_bus(sim);
|
|
cpi->base_transfer_speed = 3300;
|
|
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
|
|
strncpy(cpi->hba_vid, "Adaptec", HBA_IDLEN);
|
|
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
|
|
cpi->unit_number = cam_sim_unit(sim);
|
|
cpi->ccb_h.status = CAM_REQ_CMP;
|
|
xpt_done(ccb);
|
|
break;
|
|
}
|
|
default:
|
|
ccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(ccb);
|
|
break;
|
|
}
|
|
} /* asr_action */
|
|
|
|
#ifdef ASR_MEASURE_PERFORMANCE
|
|
#define WRITE_OP 1
|
|
#define READ_OP 2
|
|
#define min_submitR sc->ha_performance.read_by_size_min_time[index]
|
|
#define max_submitR sc->ha_performance.read_by_size_max_time[index]
|
|
#define min_submitW sc->ha_performance.write_by_size_min_time[index]
|
|
#define max_submitW sc->ha_performance.write_by_size_max_time[index]
|
|
|
|
STATIC INLINE void
|
|
asr_IObySize(
|
|
IN Asr_softc_t * sc,
|
|
IN u_int32_t submitted_time,
|
|
IN int op,
|
|
IN int index)
|
|
{
|
|
struct timeval submitted_timeval;
|
|
|
|
submitted_timeval.tv_sec = 0;
|
|
submitted_timeval.tv_usec = submitted_time;
|
|
|
|
if ( op == READ_OP ) {
|
|
++sc->ha_performance.read_by_size_count[index];
|
|
|
|
if ( submitted_time != 0xffffffff ) {
|
|
timevaladd(
|
|
&sc->ha_performance.read_by_size_total_time[index],
|
|
&submitted_timeval);
|
|
if ( (min_submitR == 0)
|
|
|| (submitted_time < min_submitR) ) {
|
|
min_submitR = submitted_time;
|
|
}
|
|
|
|
if ( submitted_time > max_submitR ) {
|
|
max_submitR = submitted_time;
|
|
}
|
|
}
|
|
} else {
|
|
++sc->ha_performance.write_by_size_count[index];
|
|
if ( submitted_time != 0xffffffff ) {
|
|
timevaladd(
|
|
&sc->ha_performance.write_by_size_total_time[index],
|
|
&submitted_timeval);
|
|
if ( (submitted_time < min_submitW)
|
|
|| (min_submitW == 0) ) {
|
|
min_submitW = submitted_time;
|
|
}
|
|
|
|
if ( submitted_time > max_submitW ) {
|
|
max_submitW = submitted_time;
|
|
}
|
|
}
|
|
}
|
|
} /* asr_IObySize */
|
|
#endif
|
|
|
|
/*
|
|
* Handle processing of current CCB as pointed to by the Status.
|
|
*/
|
|
STATIC int
|
|
asr_intr (
|
|
IN Asr_softc_t * sc)
|
|
{
|
|
OUT int processed;
|
|
|
|
#ifdef ASR_MEASURE_PERFORMANCE
|
|
struct timeval junk;
|
|
|
|
microtime(&junk);
|
|
sc->ha_performance.intr_started = junk;
|
|
#endif
|
|
|
|
for (processed = 0;
|
|
sc->ha_Virt->Status & Mask_InterruptsDisabled;
|
|
processed = 1) {
|
|
union asr_ccb * ccb;
|
|
U32 ReplyOffset;
|
|
PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME Reply;
|
|
|
|
if (((ReplyOffset = sc->ha_Virt->FromFIFO) == EMPTY_QUEUE)
|
|
&& ((ReplyOffset = sc->ha_Virt->FromFIFO) == EMPTY_QUEUE)) {
|
|
break;
|
|
}
|
|
Reply = (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)(ReplyOffset
|
|
- sc->ha_Msgs_Phys + (char *)(sc->ha_Msgs));
|
|
/*
|
|
* We do not need any (optional byteswapping) method access to
|
|
* the Initiator context field.
|
|
*/
|
|
ccb = (union asr_ccb *)(long)
|
|
I2O_MESSAGE_FRAME_getInitiatorContext64(
|
|
&(Reply->StdReplyFrame.StdMessageFrame));
|
|
if (I2O_MESSAGE_FRAME_getMsgFlags(
|
|
&(Reply->StdReplyFrame.StdMessageFrame))
|
|
& I2O_MESSAGE_FLAGS_FAIL) {
|
|
defAlignLong(I2O_UTIL_NOP_MESSAGE,Message);
|
|
PI2O_UTIL_NOP_MESSAGE Message_Ptr;
|
|
U32 MessageOffset;
|
|
|
|
MessageOffset = (u_long)
|
|
I2O_FAILURE_REPLY_MESSAGE_FRAME_getPreservedMFA(
|
|
(PI2O_FAILURE_REPLY_MESSAGE_FRAME)Reply);
|
|
/*
|
|
* Get the Original Message Frame's address, and get
|
|
* it's Transaction Context into our space. (Currently
|
|
* unused at original authorship, but better to be
|
|
* safe than sorry). Straight copy means that we
|
|
* need not concern ourselves with the (optional
|
|
* byteswapping) method access.
|
|
*/
|
|
Reply->StdReplyFrame.TransactionContext
|
|
= ((PI2O_SINGLE_REPLY_MESSAGE_FRAME)
|
|
(sc->ha_Virt->Address + MessageOffset))
|
|
->TransactionContext;
|
|
/*
|
|
* For 64 bit machines, we need to reconstruct the
|
|
* 64 bit context.
|
|
*/
|
|
ccb = (union asr_ccb *)(long)
|
|
I2O_MESSAGE_FRAME_getInitiatorContext64(
|
|
&(Reply->StdReplyFrame.StdMessageFrame));
|
|
/*
|
|
* Unique error code for command failure.
|
|
*/
|
|
I2O_SINGLE_REPLY_MESSAGE_FRAME_setDetailedStatusCode(
|
|
&(Reply->StdReplyFrame), (u_int16_t)-2);
|
|
/*
|
|
* Modify the message frame to contain a NOP and
|
|
* re-issue it to the controller.
|
|
*/
|
|
Message_Ptr = (PI2O_UTIL_NOP_MESSAGE)ASR_fillMessage(
|
|
Message, sizeof(I2O_UTIL_NOP_MESSAGE));
|
|
# if (I2O_UTIL_NOP != 0)
|
|
I2O_MESSAGE_FRAME_setFunction (
|
|
&(Message_Ptr->StdMessageFrame),
|
|
I2O_UTIL_NOP);
|
|
# endif
|
|
/*
|
|
* Copy the packet out to the Original Message
|
|
*/
|
|
bcopy ((caddr_t)Message_Ptr,
|
|
sc->ha_Virt->Address + MessageOffset,
|
|
sizeof(I2O_UTIL_NOP_MESSAGE));
|
|
/*
|
|
* Issue the NOP
|
|
*/
|
|
sc->ha_Virt->ToFIFO = MessageOffset;
|
|
}
|
|
|
|
/*
|
|
* Asynchronous command with no return requirements,
|
|
* and a generic handler for immunity against odd error
|
|
* returns from the adapter.
|
|
*/
|
|
if (ccb == (union asr_ccb *)NULL) {
|
|
/*
|
|
* Return Reply so that it can be used for the
|
|
* next command
|
|
*/
|
|
sc->ha_Virt->FromFIFO = ReplyOffset;
|
|
continue;
|
|
}
|
|
|
|
/* Welease Wadjah! (and stop timeouts) */
|
|
ASR_ccbRemove (sc, ccb);
|
|
|
|
switch (
|
|
I2O_SINGLE_REPLY_MESSAGE_FRAME_getDetailedStatusCode(
|
|
&(Reply->StdReplyFrame))) {
|
|
|
|
case I2O_SCSI_DSC_SUCCESS:
|
|
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
|
|
ccb->ccb_h.status |= CAM_REQ_CMP;
|
|
break;
|
|
|
|
case I2O_SCSI_DSC_CHECK_CONDITION:
|
|
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
|
|
ccb->ccb_h.status |= CAM_REQ_CMP|CAM_AUTOSNS_VALID;
|
|
break;
|
|
|
|
case I2O_SCSI_DSC_BUSY:
|
|
/* FALLTHRU */
|
|
case I2O_SCSI_HBA_DSC_ADAPTER_BUSY:
|
|
/* FALLTHRU */
|
|
case I2O_SCSI_HBA_DSC_SCSI_BUS_RESET:
|
|
/* FALLTHRU */
|
|
case I2O_SCSI_HBA_DSC_BUS_BUSY:
|
|
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
|
|
ccb->ccb_h.status |= CAM_SCSI_BUSY;
|
|
break;
|
|
|
|
case I2O_SCSI_HBA_DSC_SELECTION_TIMEOUT:
|
|
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
|
|
ccb->ccb_h.status |= CAM_SEL_TIMEOUT;
|
|
break;
|
|
|
|
case I2O_SCSI_HBA_DSC_COMMAND_TIMEOUT:
|
|
/* FALLTHRU */
|
|
case I2O_SCSI_HBA_DSC_DEVICE_NOT_PRESENT:
|
|
/* FALLTHRU */
|
|
case I2O_SCSI_HBA_DSC_LUN_INVALID:
|
|
/* FALLTHRU */
|
|
case I2O_SCSI_HBA_DSC_SCSI_TID_INVALID:
|
|
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
|
|
ccb->ccb_h.status |= CAM_CMD_TIMEOUT;
|
|
break;
|
|
|
|
case I2O_SCSI_HBA_DSC_DATA_OVERRUN:
|
|
/* FALLTHRU */
|
|
case I2O_SCSI_HBA_DSC_REQUEST_LENGTH_ERROR:
|
|
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
|
|
ccb->ccb_h.status |= CAM_DATA_RUN_ERR;
|
|
break;
|
|
|
|
default:
|
|
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
|
|
ccb->ccb_h.status |= CAM_REQUEUE_REQ;
|
|
break;
|
|
}
|
|
if ((ccb->csio.resid = ccb->csio.dxfer_len) != 0) {
|
|
ccb->csio.resid -=
|
|
I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME_getTransferCount(
|
|
Reply);
|
|
}
|
|
|
|
#ifdef ASR_MEASURE_PERFORMANCE
|
|
{
|
|
struct timeval endTime;
|
|
u_int32_t submitted_time;
|
|
u_int32_t size;
|
|
int op_type;
|
|
int startTimeIndex;
|
|
|
|
--sc->ha_submitted_ccbs_count;
|
|
startTimeIndex
|
|
= (int)Reply->StdReplyFrame.TransactionContext;
|
|
if (-1 != startTimeIndex) {
|
|
/* Compute the time spent in device/adapter */
|
|
microtime(&endTime);
|
|
submitted_time = asr_time_delta(sc->ha_timeQ[
|
|
startTimeIndex], endTime);
|
|
/* put the startTimeIndex back on free list */
|
|
ENQ_TIMEQ_FREE_LIST(startTimeIndex,
|
|
sc->ha_timeQFreeList,
|
|
sc->ha_timeQFreeHead,
|
|
sc->ha_timeQFreeTail);
|
|
} else {
|
|
submitted_time = 0xffffffff;
|
|
}
|
|
|
|
#define maxctime sc->ha_performance.max_command_time[ccb->csio.cdb_io.cdb_bytes[0]]
|
|
#define minctime sc->ha_performance.min_command_time[ccb->csio.cdb_io.cdb_bytes[0]]
|
|
if (submitted_time != 0xffffffff) {
|
|
if ( maxctime < submitted_time ) {
|
|
maxctime = submitted_time;
|
|
}
|
|
if ( (minctime == 0)
|
|
|| (minctime > submitted_time) ) {
|
|
minctime = submitted_time;
|
|
}
|
|
|
|
if ( sc->ha_performance.max_submit_time
|
|
< submitted_time ) {
|
|
sc->ha_performance.max_submit_time
|
|
= submitted_time;
|
|
}
|
|
if ( sc->ha_performance.min_submit_time == 0
|
|
|| sc->ha_performance.min_submit_time
|
|
> submitted_time) {
|
|
sc->ha_performance.min_submit_time
|
|
= submitted_time;
|
|
}
|
|
|
|
switch ( ccb->csio.cdb_io.cdb_bytes[0] ) {
|
|
|
|
case 0xa8: /* 12-byte READ */
|
|
/* FALLTHRU */
|
|
case 0x08: /* 6-byte READ */
|
|
/* FALLTHRU */
|
|
case 0x28: /* 10-byte READ */
|
|
op_type = READ_OP;
|
|
break;
|
|
|
|
case 0x0a: /* 6-byte WRITE */
|
|
/* FALLTHRU */
|
|
case 0xaa: /* 12-byte WRITE */
|
|
/* FALLTHRU */
|
|
case 0x2a: /* 10-byte WRITE */
|
|
op_type = WRITE_OP;
|
|
break;
|
|
|
|
default:
|
|
op_type = 0;
|
|
break;
|
|
}
|
|
|
|
if ( op_type != 0 ) {
|
|
struct scsi_rw_big * cmd;
|
|
|
|
cmd = (struct scsi_rw_big *)
|
|
&(ccb->csio.cdb_io);
|
|
|
|
size = (((u_int32_t) cmd->length2 << 8)
|
|
| ((u_int32_t) cmd->length1)) << 9;
|
|
|
|
switch ( size ) {
|
|
|
|
case 512:
|
|
asr_IObySize(sc,
|
|
submitted_time, op_type,
|
|
SIZE_512);
|
|
break;
|
|
|
|
case 1024:
|
|
asr_IObySize(sc,
|
|
submitted_time, op_type,
|
|
SIZE_1K);
|
|
break;
|
|
|
|
case 2048:
|
|
asr_IObySize(sc,
|
|
submitted_time, op_type,
|
|
SIZE_2K);
|
|
break;
|
|
|
|
case 4096:
|
|
asr_IObySize(sc,
|
|
submitted_time, op_type,
|
|
SIZE_4K);
|
|
break;
|
|
|
|
case 8192:
|
|
asr_IObySize(sc,
|
|
submitted_time, op_type,
|
|
SIZE_8K);
|
|
break;
|
|
|
|
case 16384:
|
|
asr_IObySize(sc,
|
|
submitted_time, op_type,
|
|
SIZE_16K);
|
|
break;
|
|
|
|
case 32768:
|
|
asr_IObySize(sc,
|
|
submitted_time, op_type,
|
|
SIZE_32K);
|
|
break;
|
|
|
|
case 65536:
|
|
asr_IObySize(sc,
|
|
submitted_time, op_type,
|
|
SIZE_64K);
|
|
break;
|
|
|
|
default:
|
|
if ( size > (1 << 16) ) {
|
|
asr_IObySize(sc,
|
|
submitted_time,
|
|
op_type,
|
|
SIZE_BIGGER);
|
|
} else {
|
|
asr_IObySize(sc,
|
|
submitted_time,
|
|
op_type,
|
|
SIZE_OTHER);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
/* Sense data in reply packet */
|
|
if (ccb->ccb_h.status & CAM_AUTOSNS_VALID) {
|
|
u_int16_t size = I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME_getAutoSenseTransferCount(Reply);
|
|
|
|
if (size) {
|
|
if (size > sizeof(ccb->csio.sense_data)) {
|
|
size = sizeof(ccb->csio.sense_data);
|
|
}
|
|
if (size > I2O_SCSI_SENSE_DATA_SZ) {
|
|
size = I2O_SCSI_SENSE_DATA_SZ;
|
|
}
|
|
if ((ccb->csio.sense_len)
|
|
&& (size > ccb->csio.sense_len)) {
|
|
size = ccb->csio.sense_len;
|
|
}
|
|
bcopy ((caddr_t)Reply->SenseData,
|
|
(caddr_t)&(ccb->csio.sense_data), size);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Return Reply so that it can be used for the next command
|
|
* since we have no more need for it now
|
|
*/
|
|
sc->ha_Virt->FromFIFO = ReplyOffset;
|
|
|
|
if (ccb->ccb_h.path) {
|
|
xpt_done ((union ccb *)ccb);
|
|
} else {
|
|
wakeup ((caddr_t)ccb);
|
|
}
|
|
}
|
|
#ifdef ASR_MEASURE_PERFORMANCE
|
|
{
|
|
u_int32_t result;
|
|
|
|
microtime(&junk);
|
|
result = asr_time_delta(sc->ha_performance.intr_started, junk);
|
|
|
|
if (result != 0xffffffff) {
|
|
if ( sc->ha_performance.max_intr_time < result ) {
|
|
sc->ha_performance.max_intr_time = result;
|
|
}
|
|
|
|
if ( (sc->ha_performance.min_intr_time == 0)
|
|
|| (sc->ha_performance.min_intr_time > result) ) {
|
|
sc->ha_performance.min_intr_time = result;
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
return (processed);
|
|
} /* asr_intr */
|
|
|
|
#undef QueueSize /* Grrrr */
|
|
#undef SG_Size /* Grrrr */
|
|
|
|
/*
|
|
* Meant to be included at the bottom of asr.c !!!
|
|
*/
|
|
|
|
/*
|
|
* Included here as hard coded. Done because other necessary include
|
|
* files utilize C++ comment structures which make them a nuisance to
|
|
* included here just to pick up these three typedefs.
|
|
*/
|
|
typedef U32 DPT_TAG_T;
|
|
typedef U32 DPT_MSG_T;
|
|
typedef U32 DPT_RTN_T;
|
|
|
|
#undef SCSI_RESET /* Conflicts with "scsi/scsiconf.h" defintion */
|
|
#include "dev/asr/osd_unix.h"
|
|
|
|
#define asr_unit(dev) minor(dev)
|
|
|
|
STATIC INLINE Asr_softc_t *
|
|
ASR_get_sc (
|
|
IN dev_t dev)
|
|
{
|
|
int unit = asr_unit(dev);
|
|
OUT Asr_softc_t * sc = Asr_softc;
|
|
|
|
while (sc && sc->ha_sim[0] && (cam_sim_unit(sc->ha_sim[0]) != unit)) {
|
|
sc = sc->ha_next;
|
|
}
|
|
return (sc);
|
|
} /* ASR_get_sc */
|
|
|
|
STATIC u_int8_t ASR_ctlr_held;
|
|
|
|
STATIC int
|
|
asr_open(
|
|
IN dev_t dev,
|
|
int32_t flags,
|
|
int32_t ifmt,
|
|
IN struct proc * proc)
|
|
{
|
|
int s;
|
|
OUT int error;
|
|
UNREFERENCED_PARAMETER(flags);
|
|
UNREFERENCED_PARAMETER(ifmt);
|
|
|
|
if (ASR_get_sc (dev) == (Asr_softc_t *)NULL) {
|
|
return (ENODEV);
|
|
}
|
|
s = splcam ();
|
|
if (ASR_ctlr_held) {
|
|
error = EBUSY;
|
|
} else if ((error = suser(proc)) == 0) {
|
|
++ASR_ctlr_held;
|
|
}
|
|
splx(s);
|
|
return (error);
|
|
} /* asr_open */
|
|
|
|
STATIC int
|
|
asr_close(
|
|
dev_t dev,
|
|
int flags,
|
|
int ifmt,
|
|
struct proc * proc)
|
|
{
|
|
UNREFERENCED_PARAMETER(dev);
|
|
UNREFERENCED_PARAMETER(flags);
|
|
UNREFERENCED_PARAMETER(ifmt);
|
|
UNREFERENCED_PARAMETER(proc);
|
|
|
|
ASR_ctlr_held = 0;
|
|
return (0);
|
|
} /* asr_close */
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
/* Function ASR_queue_i */
|
|
/*-------------------------------------------------------------------------*/
|
|
/* The Parameters Passed To This Function Are : */
|
|
/* Asr_softc_t * : HBA miniport driver's adapter data storage. */
|
|
/* PI2O_MESSAGE_FRAME : Msg Structure Pointer For This Command */
|
|
/* I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME following the Msg Structure */
|
|
/* */
|
|
/* This Function Will Take The User Request Packet And Convert It To An */
|
|
/* I2O MSG And Send It Off To The Adapter. */
|
|
/* */
|
|
/* Return : 0 For OK, Error Code Otherwise */
|
|
/*-------------------------------------------------------------------------*/
|
|
STATIC INLINE int
|
|
ASR_queue_i(
|
|
IN Asr_softc_t * sc,
|
|
INOUT PI2O_MESSAGE_FRAME Packet)
|
|
{
|
|
union asr_ccb * ccb;
|
|
PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME Reply;
|
|
PI2O_MESSAGE_FRAME Message_Ptr;
|
|
PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME Reply_Ptr;
|
|
int MessageSizeInBytes;
|
|
int ReplySizeInBytes;
|
|
int error;
|
|
int s;
|
|
/* Scatter Gather buffer list */
|
|
struct ioctlSgList_S {
|
|
SLIST_ENTRY(ioctlSgList_S) link;
|
|
caddr_t UserSpace;
|
|
I2O_FLAGS_COUNT FlagsCount;
|
|
char KernelSpace[sizeof(long)];
|
|
} * elm;
|
|
/* Generates a `first' entry */
|
|
SLIST_HEAD(ioctlSgListHead_S, ioctlSgList_S) sgList;
|
|
|
|
if (ASR_getBlinkLedCode(sc)) {
|
|
debug_usr_cmd_printf ("Adapter currently in BlinkLed %x\n",
|
|
ASR_getBlinkLedCode(sc));
|
|
return (EIO);
|
|
}
|
|
/* Copy in the message into a local allocation */
|
|
if ((Message_Ptr = (PI2O_MESSAGE_FRAME)malloc (
|
|
sizeof(I2O_MESSAGE_FRAME), M_TEMP, M_WAITOK))
|
|
== (PI2O_MESSAGE_FRAME)NULL) {
|
|
debug_usr_cmd_printf (
|
|
"Failed to acquire I2O_MESSAGE_FRAME memory\n");
|
|
return (ENOMEM);
|
|
}
|
|
if ((error = copyin ((caddr_t)Packet, (caddr_t)Message_Ptr,
|
|
sizeof(I2O_MESSAGE_FRAME))) != 0) {
|
|
free (Message_Ptr, M_TEMP);
|
|
debug_usr_cmd_printf ("Can't copy in packet errno=%d\n", error);
|
|
return (error);
|
|
}
|
|
/* Acquire information to determine type of packet */
|
|
MessageSizeInBytes = (I2O_MESSAGE_FRAME_getMessageSize(Message_Ptr)<<2);
|
|
/* The offset of the reply information within the user packet */
|
|
Reply = (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)((char *)Packet
|
|
+ MessageSizeInBytes);
|
|
|
|
/* Check if the message is a synchronous initialization command */
|
|
s = I2O_MESSAGE_FRAME_getFunction(Message_Ptr);
|
|
free (Message_Ptr, M_TEMP);
|
|
switch (s) {
|
|
|
|
case I2O_EXEC_IOP_RESET:
|
|
{ U32 status;
|
|
|
|
status = ASR_resetIOP(sc->ha_Virt);
|
|
ReplySizeInBytes = sizeof(status);
|
|
debug_usr_cmd_printf ("resetIOP done\n");
|
|
return (copyout ((caddr_t)&status, (caddr_t)Reply,
|
|
ReplySizeInBytes));
|
|
}
|
|
|
|
case I2O_EXEC_STATUS_GET:
|
|
{ I2O_EXEC_STATUS_GET_REPLY status;
|
|
|
|
if (ASR_getStatus (sc->ha_Virt, &status)
|
|
== (PI2O_EXEC_STATUS_GET_REPLY)NULL) {
|
|
debug_usr_cmd_printf ("getStatus failed\n");
|
|
return (ENXIO);
|
|
}
|
|
ReplySizeInBytes = sizeof(status);
|
|
debug_usr_cmd_printf ("getStatus done\n");
|
|
return (copyout ((caddr_t)&status, (caddr_t)Reply,
|
|
ReplySizeInBytes));
|
|
}
|
|
|
|
case I2O_EXEC_OUTBOUND_INIT:
|
|
{ U32 status;
|
|
|
|
status = ASR_initOutBound(sc);
|
|
ReplySizeInBytes = sizeof(status);
|
|
debug_usr_cmd_printf ("intOutBound done\n");
|
|
return (copyout ((caddr_t)&status, (caddr_t)Reply,
|
|
ReplySizeInBytes));
|
|
}
|
|
}
|
|
|
|
/* Determine if the message size is valid */
|
|
if ((MessageSizeInBytes < sizeof(I2O_MESSAGE_FRAME))
|
|
|| (MAX_INBOUND_SIZE < MessageSizeInBytes)) {
|
|
debug_usr_cmd_printf ("Packet size %d incorrect\n",
|
|
MessageSizeInBytes);
|
|
return (EINVAL);
|
|
}
|
|
|
|
if ((Message_Ptr = (PI2O_MESSAGE_FRAME)malloc (MessageSizeInBytes,
|
|
M_TEMP, M_WAITOK)) == (PI2O_MESSAGE_FRAME)NULL) {
|
|
debug_usr_cmd_printf ("Failed to acquire frame[%d] memory\n",
|
|
MessageSizeInBytes);
|
|
return (ENOMEM);
|
|
}
|
|
if ((error = copyin ((caddr_t)Packet, (caddr_t)Message_Ptr,
|
|
MessageSizeInBytes)) != 0) {
|
|
free (Message_Ptr, M_TEMP);
|
|
debug_usr_cmd_printf ("Can't copy in packet[%d] errno=%d\n",
|
|
MessageSizeInBytes, error);
|
|
return (error);
|
|
}
|
|
|
|
/* Check the size of the reply frame, and start constructing */
|
|
|
|
if ((Reply_Ptr = (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)malloc (
|
|
sizeof(I2O_MESSAGE_FRAME), M_TEMP, M_WAITOK))
|
|
== (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)NULL) {
|
|
free (Message_Ptr, M_TEMP);
|
|
debug_usr_cmd_printf (
|
|
"Failed to acquire I2O_MESSAGE_FRAME memory\n");
|
|
return (ENOMEM);
|
|
}
|
|
if ((error = copyin ((caddr_t)Reply, (caddr_t)Reply_Ptr,
|
|
sizeof(I2O_MESSAGE_FRAME))) != 0) {
|
|
free (Reply_Ptr, M_TEMP);
|
|
free (Message_Ptr, M_TEMP);
|
|
debug_usr_cmd_printf (
|
|
"Failed to copy in reply frame, errno=%d\n",
|
|
error);
|
|
return (error);
|
|
}
|
|
ReplySizeInBytes = (I2O_MESSAGE_FRAME_getMessageSize(
|
|
&(Reply_Ptr->StdReplyFrame.StdMessageFrame)) << 2);
|
|
free (Reply_Ptr, M_TEMP);
|
|
if (ReplySizeInBytes < sizeof(I2O_SINGLE_REPLY_MESSAGE_FRAME)) {
|
|
free (Message_Ptr, M_TEMP);
|
|
debug_usr_cmd_printf (
|
|
"Failed to copy in reply frame[%d], errno=%d\n",
|
|
ReplySizeInBytes, error);
|
|
return (EINVAL);
|
|
}
|
|
|
|
if ((Reply_Ptr = (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)malloc (
|
|
((ReplySizeInBytes > sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME))
|
|
? ReplySizeInBytes
|
|
: sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)),
|
|
M_TEMP, M_WAITOK)) == (PI2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)NULL) {
|
|
free (Message_Ptr, M_TEMP);
|
|
debug_usr_cmd_printf ("Failed to acquire frame[%d] memory\n",
|
|
ReplySizeInBytes);
|
|
return (ENOMEM);
|
|
}
|
|
(void)ASR_fillMessage ((char *)Reply_Ptr, ReplySizeInBytes);
|
|
Reply_Ptr->StdReplyFrame.StdMessageFrame.InitiatorContext
|
|
= Message_Ptr->InitiatorContext;
|
|
Reply_Ptr->StdReplyFrame.TransactionContext
|
|
= ((PI2O_PRIVATE_MESSAGE_FRAME)Message_Ptr)->TransactionContext;
|
|
I2O_MESSAGE_FRAME_setMsgFlags(
|
|
&(Reply_Ptr->StdReplyFrame.StdMessageFrame),
|
|
I2O_MESSAGE_FRAME_getMsgFlags(
|
|
&(Reply_Ptr->StdReplyFrame.StdMessageFrame))
|
|
| I2O_MESSAGE_FLAGS_REPLY);
|
|
|
|
/* Check if the message is a special case command */
|
|
switch (I2O_MESSAGE_FRAME_getFunction(Message_Ptr)) {
|
|
case I2O_EXEC_SYS_TAB_SET: /* Special Case of empty Scatter Gather */
|
|
if (MessageSizeInBytes == ((I2O_MESSAGE_FRAME_getVersionOffset(
|
|
Message_Ptr) & 0xF0) >> 2)) {
|
|
free (Message_Ptr, M_TEMP);
|
|
I2O_SINGLE_REPLY_MESSAGE_FRAME_setDetailedStatusCode(
|
|
&(Reply_Ptr->StdReplyFrame), (ASR_setSysTab(sc) != CAM_REQ_CMP));
|
|
I2O_MESSAGE_FRAME_setMessageSize(
|
|
&(Reply_Ptr->StdReplyFrame.StdMessageFrame),
|
|
sizeof(I2O_SINGLE_REPLY_MESSAGE_FRAME));
|
|
error = copyout ((caddr_t)Reply_Ptr, (caddr_t)Reply,
|
|
ReplySizeInBytes);
|
|
free (Reply_Ptr, M_TEMP);
|
|
return (error);
|
|
}
|
|
}
|
|
|
|
/* Deal in the general case */
|
|
/* First allocate and optionally copy in each scatter gather element */
|
|
SLIST_INIT(&sgList);
|
|
if ((I2O_MESSAGE_FRAME_getVersionOffset(Message_Ptr) & 0xF0) != 0) {
|
|
PI2O_SGE_SIMPLE_ELEMENT sg;
|
|
|
|
/*
|
|
* since this code is reused in several systems, code
|
|
* efficiency is greater by using a shift operation rather
|
|
* than a divide by sizeof(u_int32_t).
|
|
*/
|
|
sg = (PI2O_SGE_SIMPLE_ELEMENT)((char *)Message_Ptr
|
|
+ ((I2O_MESSAGE_FRAME_getVersionOffset(Message_Ptr) & 0xF0)
|
|
>> 2));
|
|
while (sg < (PI2O_SGE_SIMPLE_ELEMENT)(((caddr_t)Message_Ptr)
|
|
+ MessageSizeInBytes)) {
|
|
caddr_t v;
|
|
int len;
|
|
|
|
if ((I2O_FLAGS_COUNT_getFlags(&(sg->FlagsCount))
|
|
& I2O_SGL_FLAGS_SIMPLE_ADDRESS_ELEMENT) == 0) {
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
len = I2O_FLAGS_COUNT_getCount(&(sg->FlagsCount));
|
|
debug_usr_cmd_printf ("SG[%d] = %x[%d]\n",
|
|
sg - (PI2O_SGE_SIMPLE_ELEMENT)((char *)Message_Ptr
|
|
+ ((I2O_MESSAGE_FRAME_getVersionOffset(
|
|
Message_Ptr) & 0xF0) >> 2)),
|
|
I2O_SGE_SIMPLE_ELEMENT_getPhysicalAddress(sg), len);
|
|
|
|
if ((elm = (struct ioctlSgList_S *)malloc (
|
|
sizeof(*elm) - sizeof(elm->KernelSpace) + len,
|
|
M_TEMP, M_WAITOK))
|
|
== (struct ioctlSgList_S *)NULL) {
|
|
debug_usr_cmd_printf (
|
|
"Failed to allocate SG[%d]\n", len);
|
|
error = ENOMEM;
|
|
break;
|
|
}
|
|
SLIST_INSERT_HEAD(&sgList, elm, link);
|
|
elm->FlagsCount = sg->FlagsCount;
|
|
elm->UserSpace = (caddr_t)
|
|
(I2O_SGE_SIMPLE_ELEMENT_getPhysicalAddress(sg));
|
|
v = elm->KernelSpace;
|
|
/* Copy in outgoing data (DIR bit could be invalid) */
|
|
if ((error = copyin (elm->UserSpace, (caddr_t)v, len))
|
|
!= 0) {
|
|
break;
|
|
}
|
|
/*
|
|
* If the buffer is not contiguous, lets
|
|
* break up the scatter/gather entries.
|
|
*/
|
|
while ((len > 0)
|
|
&& (sg < (PI2O_SGE_SIMPLE_ELEMENT)
|
|
(((caddr_t)Message_Ptr) + MAX_INBOUND_SIZE))) {
|
|
int next, base, span;
|
|
|
|
span = 0;
|
|
next = base = KVTOPHYS(v);
|
|
I2O_SGE_SIMPLE_ELEMENT_setPhysicalAddress(sg,
|
|
base);
|
|
|
|
/* How far can we go physically contiguously */
|
|
while ((len > 0) && (base == next)) {
|
|
int size;
|
|
|
|
next = trunc_page(base) + PAGE_SIZE;
|
|
size = next - base;
|
|
if (size > len) {
|
|
size = len;
|
|
}
|
|
span += size;
|
|
v += size;
|
|
len -= size;
|
|
base = KVTOPHYS(v);
|
|
}
|
|
|
|
/* Construct the Flags */
|
|
I2O_FLAGS_COUNT_setCount(&(sg->FlagsCount),
|
|
span);
|
|
{
|
|
int flags = I2O_FLAGS_COUNT_getFlags(
|
|
&(elm->FlagsCount));
|
|
/* Any remaining length? */
|
|
if (len > 0) {
|
|
flags &=
|
|
~(I2O_SGL_FLAGS_END_OF_BUFFER
|
|
| I2O_SGL_FLAGS_LAST_ELEMENT);
|
|
}
|
|
I2O_FLAGS_COUNT_setFlags(
|
|
&(sg->FlagsCount), flags);
|
|
}
|
|
|
|
debug_usr_cmd_printf ("sg[%d] = %x[%d]\n",
|
|
sg - (PI2O_SGE_SIMPLE_ELEMENT)
|
|
((char *)Message_Ptr
|
|
+ ((I2O_MESSAGE_FRAME_getVersionOffset(
|
|
Message_Ptr) & 0xF0) >> 2)),
|
|
I2O_SGE_SIMPLE_ELEMENT_getPhysicalAddress(sg),
|
|
span);
|
|
if (len <= 0) {
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Incrementing requires resizing of the
|
|
* packet, and moving up the existing SG
|
|
* elements.
|
|
*/
|
|
++sg;
|
|
MessageSizeInBytes += sizeof(*sg);
|
|
I2O_MESSAGE_FRAME_setMessageSize(Message_Ptr,
|
|
I2O_MESSAGE_FRAME_getMessageSize(Message_Ptr)
|
|
+ (sizeof(*sg) / sizeof(U32)));
|
|
{
|
|
PI2O_MESSAGE_FRAME NewMessage_Ptr;
|
|
|
|
if ((NewMessage_Ptr
|
|
= (PI2O_MESSAGE_FRAME)
|
|
malloc (MessageSizeInBytes,
|
|
M_TEMP, M_WAITOK))
|
|
== (PI2O_MESSAGE_FRAME)NULL) {
|
|
debug_usr_cmd_printf (
|
|
"Failed to acquire frame[%d] memory\n",
|
|
MessageSizeInBytes);
|
|
error = ENOMEM;
|
|
break;
|
|
}
|
|
span = ((caddr_t)sg)
|
|
- (caddr_t)Message_Ptr;
|
|
bcopy ((caddr_t)Message_Ptr,
|
|
(caddr_t)NewMessage_Ptr, span);
|
|
bcopy ((caddr_t)(sg-1),
|
|
((caddr_t)NewMessage_Ptr) + span,
|
|
MessageSizeInBytes - span);
|
|
free (Message_Ptr, M_TEMP);
|
|
sg = (PI2O_SGE_SIMPLE_ELEMENT)
|
|
(((caddr_t)NewMessage_Ptr) + span);
|
|
Message_Ptr = NewMessage_Ptr;
|
|
}
|
|
}
|
|
if ((error)
|
|
|| ((I2O_FLAGS_COUNT_getFlags(&(sg->FlagsCount))
|
|
& I2O_SGL_FLAGS_LAST_ELEMENT) != 0)) {
|
|
break;
|
|
}
|
|
++sg;
|
|
}
|
|
if (error) {
|
|
while ((elm = SLIST_FIRST(&sgList))
|
|
!= (struct ioctlSgList_S *)NULL) {
|
|
SLIST_REMOVE_HEAD(&sgList,link);
|
|
free (elm, M_TEMP);
|
|
}
|
|
free (Reply_Ptr, M_TEMP);
|
|
free (Message_Ptr, M_TEMP);
|
|
return (error);
|
|
}
|
|
}
|
|
|
|
debug_usr_cmd_printf ("Inbound: ");
|
|
debug_usr_cmd_dump_message(Message_Ptr);
|
|
|
|
/* Send the command */
|
|
if ((ccb = asr_alloc_ccb (sc)) == (union asr_ccb *)NULL) {
|
|
/* Free up in-kernel buffers */
|
|
while ((elm = SLIST_FIRST(&sgList))
|
|
!= (struct ioctlSgList_S *)NULL) {
|
|
SLIST_REMOVE_HEAD(&sgList,link);
|
|
free (elm, M_TEMP);
|
|
}
|
|
free (Reply_Ptr, M_TEMP);
|
|
free (Message_Ptr, M_TEMP);
|
|
return (ENOMEM);
|
|
}
|
|
|
|
/*
|
|
* We do not need any (optional byteswapping) method access to
|
|
* the Initiator context field.
|
|
*/
|
|
I2O_MESSAGE_FRAME_setInitiatorContext64(
|
|
(PI2O_MESSAGE_FRAME)Message_Ptr, (long)ccb);
|
|
|
|
(void)ASR_queue (sc, (PI2O_MESSAGE_FRAME)Message_Ptr);
|
|
|
|
free (Message_Ptr, M_TEMP);
|
|
|
|
/*
|
|
* Wait for the board to report a finished instruction.
|
|
*/
|
|
s = splcam();
|
|
while (ccb->ccb_h.status == CAM_REQ_INPROG) {
|
|
if (ASR_getBlinkLedCode(sc)) {
|
|
/* Reset Adapter */
|
|
printf ("asr%d: Blink LED 0x%x resetting adapter\n",
|
|
cam_sim_unit(xpt_path_sim(ccb->ccb_h.path)),
|
|
ASR_getBlinkLedCode(sc));
|
|
ASR_reset (sc);
|
|
splx(s);
|
|
/* Command Cleanup */
|
|
ASR_ccbRemove(sc, ccb);
|
|
/* Free up in-kernel buffers */
|
|
while ((elm = SLIST_FIRST(&sgList))
|
|
!= (struct ioctlSgList_S *)NULL) {
|
|
SLIST_REMOVE_HEAD(&sgList,link);
|
|
free (elm, M_TEMP);
|
|
}
|
|
free (Reply_Ptr, M_TEMP);
|
|
asr_free_ccb(ccb);
|
|
return (EIO);
|
|
}
|
|
/* Check every second for BlinkLed */
|
|
/* There is no PRICAM, but outwardly PRIBIO is functional */
|
|
tsleep((caddr_t)ccb, PRIBIO, "asr", hz);
|
|
}
|
|
splx(s);
|
|
|
|
debug_usr_cmd_printf ("Outbound: ");
|
|
debug_usr_cmd_dump_message(Reply_Ptr);
|
|
|
|
I2O_SINGLE_REPLY_MESSAGE_FRAME_setDetailedStatusCode(
|
|
&(Reply_Ptr->StdReplyFrame), (ccb->ccb_h.status != CAM_REQ_CMP));
|
|
|
|
if (ReplySizeInBytes >= (sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)
|
|
- I2O_SCSI_SENSE_DATA_SZ - sizeof(U32))) {
|
|
I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME_setTransferCount(Reply_Ptr,
|
|
ccb->csio.dxfer_len - ccb->csio.resid);
|
|
}
|
|
if ((ccb->ccb_h.status & CAM_AUTOSNS_VALID) && (ReplySizeInBytes
|
|
> (sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)
|
|
- I2O_SCSI_SENSE_DATA_SZ))) {
|
|
int size = ReplySizeInBytes
|
|
- sizeof(I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME)
|
|
- I2O_SCSI_SENSE_DATA_SZ;
|
|
|
|
if (size > sizeof(ccb->csio.sense_data)) {
|
|
size = sizeof(ccb->csio.sense_data);
|
|
}
|
|
bcopy ((caddr_t)&(ccb->csio.sense_data), (caddr_t)Reply_Ptr->SenseData,
|
|
size);
|
|
I2O_SCSI_ERROR_REPLY_MESSAGE_FRAME_setAutoSenseTransferCount(
|
|
Reply_Ptr, size);
|
|
}
|
|
|
|
/* Free up in-kernel buffers */
|
|
while ((elm = SLIST_FIRST(&sgList)) != (struct ioctlSgList_S *)NULL) {
|
|
/* Copy out as necessary */
|
|
if ((error == 0)
|
|
/* DIR bit considered `valid', error due to ignorance works */
|
|
&& ((I2O_FLAGS_COUNT_getFlags(&(elm->FlagsCount))
|
|
& I2O_SGL_FLAGS_DIR) == 0)) {
|
|
error = copyout ((caddr_t)(elm->KernelSpace),
|
|
elm->UserSpace,
|
|
I2O_FLAGS_COUNT_getCount(&(elm->FlagsCount)));
|
|
}
|
|
SLIST_REMOVE_HEAD(&sgList,link);
|
|
free (elm, M_TEMP);
|
|
}
|
|
if (error == 0) {
|
|
/* Copy reply frame to user space */
|
|
error = copyout ((caddr_t)Reply_Ptr, (caddr_t)Reply,
|
|
ReplySizeInBytes);
|
|
}
|
|
free (Reply_Ptr, M_TEMP);
|
|
asr_free_ccb(ccb);
|
|
|
|
return (error);
|
|
} /* ASR_queue_i */
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
/* Function asr_ioctl */
|
|
/*----------------------------------------------------------------------*/
|
|
/* The parameters passed to this function are : */
|
|
/* dev : Device number. */
|
|
/* cmd : Ioctl Command */
|
|
/* data : User Argument Passed In. */
|
|
/* flag : Mode Parameter */
|
|
/* proc : Process Parameter */
|
|
/* */
|
|
/* This function is the user interface into this adapter driver */
|
|
/* */
|
|
/* Return : zero if OK, error code if not */
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
STATIC int
|
|
asr_ioctl(
|
|
IN dev_t dev,
|
|
IN u_long cmd,
|
|
INOUT caddr_t data,
|
|
int flag,
|
|
struct proc * proc)
|
|
{
|
|
int i, j;
|
|
OUT int error = 0;
|
|
Asr_softc_t * sc = ASR_get_sc (dev);
|
|
UNREFERENCED_PARAMETER(flag);
|
|
UNREFERENCED_PARAMETER(proc);
|
|
|
|
if (sc != (Asr_softc_t *)NULL)
|
|
switch(cmd) {
|
|
|
|
case DPT_SIGNATURE:
|
|
# if (dsDescription_size != 50)
|
|
case DPT_SIGNATURE + ((50 - dsDescription_size) << 16):
|
|
# endif
|
|
if (cmd & 0xFFFF0000) {
|
|
(void)bcopy ((caddr_t)(&ASR_sig), data,
|
|
sizeof(dpt_sig_S));
|
|
return (0);
|
|
}
|
|
/* Traditional version of the ioctl interface */
|
|
case DPT_SIGNATURE & 0x0000FFFF:
|
|
return (copyout ((caddr_t)(&ASR_sig), *((caddr_t *)data),
|
|
sizeof(dpt_sig_S)));
|
|
|
|
/* Traditional version of the ioctl interface */
|
|
case DPT_CTRLINFO & 0x0000FFFF:
|
|
case DPT_CTRLINFO: {
|
|
struct {
|
|
u_int16_t length;
|
|
u_int16_t drvrHBAnum;
|
|
u_int32_t baseAddr;
|
|
u_int16_t blinkState;
|
|
u_int8_t pciBusNum;
|
|
u_int8_t pciDeviceNum;
|
|
u_int16_t hbaFlags;
|
|
u_int16_t Interrupt;
|
|
u_int32_t reserved1;
|
|
u_int32_t reserved2;
|
|
u_int32_t reserved3;
|
|
} CtlrInfo;
|
|
|
|
bzero (&CtlrInfo, sizeof(CtlrInfo));
|
|
CtlrInfo.length = sizeof(CtlrInfo) - sizeof(u_int16_t);
|
|
CtlrInfo.drvrHBAnum = asr_unit(dev);
|
|
CtlrInfo.baseAddr = (u_long)sc->ha_Base;
|
|
i = ASR_getBlinkLedCode (sc);
|
|
if (i == -1) {
|
|
i = 0;
|
|
}
|
|
CtlrInfo.blinkState = i;
|
|
CtlrInfo.pciBusNum = sc->ha_pciBusNum;
|
|
CtlrInfo.pciDeviceNum = sc->ha_pciDeviceNum;
|
|
#define FLG_OSD_PCI_VALID 0x0001
|
|
#define FLG_OSD_DMA 0x0002
|
|
#define FLG_OSD_I2O 0x0004
|
|
CtlrInfo.hbaFlags = FLG_OSD_PCI_VALID | FLG_OSD_DMA | FLG_OSD_I2O;
|
|
CtlrInfo.Interrupt = sc->ha_irq;
|
|
if (cmd & 0xFFFF0000) {
|
|
bcopy (&CtlrInfo, data, sizeof(CtlrInfo));
|
|
} else {
|
|
error = copyout (&CtlrInfo, *(caddr_t *)data, sizeof(CtlrInfo));
|
|
}
|
|
} return (error);
|
|
|
|
/* Traditional version of the ioctl interface */
|
|
case DPT_SYSINFO & 0x0000FFFF:
|
|
case DPT_SYSINFO: {
|
|
sysInfo_S Info;
|
|
caddr_t c_addr;
|
|
/* Kernel Specific ptok `hack' */
|
|
# define ptok(a) ((char *)(a) + KERNBASE)
|
|
|
|
bzero (&Info, sizeof(Info));
|
|
|
|
outb (0x70, 0x12);
|
|
i = inb(0x71);
|
|
j = i >> 4;
|
|
if (i == 0x0f) {
|
|
outb (0x70, 0x19);
|
|
j = inb (0x71);
|
|
}
|
|
Info.drive0CMOS = j;
|
|
|
|
j = i & 0x0f;
|
|
if (i == 0x0f) {
|
|
outb (0x70, 0x1a);
|
|
j = inb (0x71);
|
|
}
|
|
Info.drive1CMOS = j;
|
|
|
|
Info.numDrives = *((char *)ptok(0x475));
|
|
|
|
Info.processorFamily = ASR_sig.dsProcessorFamily;
|
|
switch (cpu) {
|
|
case CPU_386SX: case CPU_386:
|
|
Info.processorType = PROC_386; break;
|
|
case CPU_486SX: case CPU_486:
|
|
Info.processorType = PROC_486; break;
|
|
case CPU_586:
|
|
Info.processorType = PROC_PENTIUM; break;
|
|
case CPU_686:
|
|
Info.processorType = PROC_SEXIUM; break;
|
|
}
|
|
Info.osType = OS_BSDI_UNIX;
|
|
Info.osMajorVersion = osrelease[0] - '0';
|
|
Info.osMinorVersion = osrelease[2] - '0';
|
|
/* Info.osRevision = 0; */
|
|
/* Info.osSubRevision = 0; */
|
|
Info.busType = SI_PCI_BUS;
|
|
Info.flags = SI_CMOS_Valid | SI_NumDrivesValid
|
|
| SI_OSversionValid |SI_BusTypeValid;
|
|
|
|
/* Go Out And Look For SmartROM */
|
|
for(i = 0; i < 3; ++i) {
|
|
int k;
|
|
|
|
if (i == 0) {
|
|
j = 0xC8000;
|
|
} else if (i == 1) {
|
|
j = 0xD8000;
|
|
} else {
|
|
j = 0xDC000;
|
|
}
|
|
c_addr = ptok(j);
|
|
if (*((unsigned short *)c_addr) != 0xAA55) {
|
|
continue;
|
|
}
|
|
if (*((u_long *)(c_addr + 6)) != 0x202053) {
|
|
continue;
|
|
}
|
|
if (*((u_long *)(c_addr + 10)) != 0x545044) {
|
|
continue;
|
|
}
|
|
c_addr += 0x24;
|
|
for (k = 0; k < 64; ++k) {
|
|
if ((*((unsigned char *)(c_addr++)) == ' ')
|
|
&& (*((unsigned char *)(c_addr)) == 'v')) {
|
|
break;
|
|
}
|
|
}
|
|
if (k < 64) {
|
|
Info.smartROMMajorVersion
|
|
= *((unsigned char *)(c_addr += 3)) - '0';
|
|
Info.smartROMMinorVersion
|
|
= *((unsigned char *)(c_addr += 2));
|
|
Info.smartROMRevision
|
|
= *((unsigned char *)(++c_addr));
|
|
Info.flags |= SI_SmartROMverValid;
|
|
break;
|
|
}
|
|
}
|
|
if (i >= 3) {
|
|
Info.flags |= SI_NO_SmartROM;
|
|
}
|
|
/* Get The Conventional Memory Size From CMOS */
|
|
outb (0x70, 0x16);
|
|
j = inb (0x71);
|
|
j <<= 8;
|
|
outb (0x70, 0x15);
|
|
j |= inb(0x71);
|
|
Info.conventionalMemSize = j;
|
|
|
|
/* Get The Extended Memory Found At Power On From CMOS */
|
|
outb (0x70, 0x31);
|
|
j = inb (0x71);
|
|
j <<= 8;
|
|
outb (0x70, 0x30);
|
|
j |= inb(0x71);
|
|
Info.extendedMemSize = j;
|
|
Info.flags |= SI_MemorySizeValid;
|
|
|
|
# if (defined(THIS_IS_BROKEN))
|
|
/* If There Is 1 or 2 Drives Found, Set Up Drive Parameters */
|
|
if (Info.numDrives > 0) {
|
|
/*
|
|
* Get The Pointer From Int 41 For The First
|
|
* Drive Parameters
|
|
*/
|
|
j = ((unsigned)(*((unsigned short *)ptok(0x104+2))) << 4)
|
|
+ (unsigned)(*((unsigned short *)ptok(0x104+0)));
|
|
/*
|
|
* It appears that SmartROM's Int41/Int46 pointers
|
|
* use memory that gets stepped on by the kernel
|
|
* loading. We no longer have access to this
|
|
* geometry information but try anyways (!?)
|
|
*/
|
|
Info.drives[0].cylinders = *((unsigned char *)ptok(j));
|
|
++j;
|
|
Info.drives[0].cylinders += ((int)*((unsigned char *)
|
|
ptok(j))) << 8;
|
|
++j;
|
|
Info.drives[0].heads = *((unsigned char *)ptok(j));
|
|
j += 12;
|
|
Info.drives[0].sectors = *((unsigned char *)ptok(j));
|
|
Info.flags |= SI_DriveParamsValid;
|
|
if ((Info.drives[0].cylinders == 0)
|
|
|| (Info.drives[0].heads == 0)
|
|
|| (Info.drives[0].sectors == 0)) {
|
|
Info.flags &= ~SI_DriveParamsValid;
|
|
}
|
|
if (Info.numDrives > 1) {
|
|
/*
|
|
* Get The Pointer From Int 46 For The
|
|
* Second Drive Parameters
|
|
*/
|
|
j = ((unsigned)(*((unsigned short *)ptok(0x118+2))) << 4)
|
|
+ (unsigned)(*((unsigned short *)ptok(0x118+0)));
|
|
Info.drives[1].cylinders = *((unsigned char *)
|
|
ptok(j));
|
|
++j;
|
|
Info.drives[1].cylinders += ((int)
|
|
*((unsigned char *)ptok(j))) << 8;
|
|
++j;
|
|
Info.drives[1].heads = *((unsigned char *)
|
|
ptok(j));
|
|
j += 12;
|
|
Info.drives[1].sectors = *((unsigned char *)
|
|
ptok(j));
|
|
if ((Info.drives[1].cylinders == 0)
|
|
|| (Info.drives[1].heads == 0)
|
|
|| (Info.drives[1].sectors == 0)) {
|
|
Info.flags &= ~SI_DriveParamsValid;
|
|
}
|
|
}
|
|
}
|
|
# endif
|
|
/* Copy Out The Info Structure To The User */
|
|
if (cmd & 0xFFFF0000) {
|
|
bcopy (&Info, data, sizeof(Info));
|
|
} else {
|
|
error = copyout (&Info, *(caddr_t *)data, sizeof(Info));
|
|
}
|
|
return (error); }
|
|
|
|
/* Get The BlinkLED State */
|
|
case DPT_BLINKLED:
|
|
i = ASR_getBlinkLedCode (sc);
|
|
if (i == -1) {
|
|
i = 0;
|
|
}
|
|
if (cmd & 0xFFFF0000) {
|
|
bcopy ((caddr_t)(&i), data, sizeof(i));
|
|
} else {
|
|
error = copyout (&i, *(caddr_t *)data, sizeof(i));
|
|
}
|
|
break;
|
|
|
|
/* Get performance metrics */
|
|
#ifdef ASR_MEASURE_PERFORMANCE
|
|
case DPT_PERF_INFO:
|
|
bcopy((caddr_t) &sc->ha_performance, data,
|
|
sizeof(sc->ha_performance));
|
|
return (0);
|
|
#endif
|
|
|
|
/* Send an I2O command */
|
|
case I2OUSRCMD:
|
|
return (ASR_queue_i (sc, *((PI2O_MESSAGE_FRAME *)data)));
|
|
|
|
/* Reset and re-initialize the adapter */
|
|
case I2ORESETCMD:
|
|
ASR_reset (sc);
|
|
return (0);
|
|
|
|
/* Rescan the LCT table and resynchronize the information */
|
|
case I2ORESCANCMD:
|
|
return (ASR_rescan (sc));
|
|
}
|
|
return (EINVAL);
|
|
} /* asr_ioctl */
|
|
|
|
#ifdef ASR_MEASURE_PERFORMANCE
|
|
/*
|
|
* This function subtracts one timeval structure from another,
|
|
* Returning the result in usec.
|
|
* It assumes that less than 4 billion usecs passed form start to end.
|
|
* If times are sensless, 0xffffffff is returned.
|
|
*/
|
|
|
|
STATIC u_int32_t
|
|
asr_time_delta(
|
|
IN struct timeval start,
|
|
IN struct timeval end)
|
|
{
|
|
OUT u_int32_t result;
|
|
|
|
if (start.tv_sec > end.tv_sec) {
|
|
result = 0xffffffff;
|
|
}
|
|
else {
|
|
if (start.tv_sec == end.tv_sec) {
|
|
if (start.tv_usec > end.tv_usec) {
|
|
result = 0xffffffff;
|
|
} else {
|
|
return (end.tv_usec - start.tv_usec);
|
|
}
|
|
} else {
|
|
return (end.tv_sec - start.tv_sec) * 1000000 +
|
|
end.tv_usec + (1000000 - start.tv_usec);
|
|
}
|
|
}
|
|
return(result);
|
|
} /* asr_time_delta */
|
|
#endif
|