70228fb346
At this time we pull out from ip_fw2.c the logging functions, and support for dynamic rules, and move kernel-only stuff into netinet/ipfw/ip_fw_private.h No ABI change involved in this commit, unless I made some mistake. ip_fw.h has changed, though not in the userland-visible part. Files touched by this commit: conf/files now references the two new source files netinet/ip_fw.h remove kernel-only definitions gone into netinet/ipfw/ip_fw_private.h. netinet/ipfw/ip_fw_private.h new file with kernel-specific ipfw definitions netinet/ipfw/ip_fw_log.c ipfw_log and related functions netinet/ipfw/ip_fw_dynamic.c code related to dynamic rules netinet/ipfw/ip_fw2.c removed the pieces that goes in the new files netinet/ipfw/ip_fw_nat.c minor rearrangement to remove LOOKUP_NAT from the main headers. This require a new function pointer. A bunch of other kernel files that included netinet/ip_fw.h now require netinet/ipfw/ip_fw_private.h as well. Not 100% sure i caught all of them. MFC after: 1 month
575 lines
17 KiB
C
575 lines
17 KiB
C
/*-
|
|
* Copyright (c) 2002-2009 Luigi Rizzo, Universita` di Pisa
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef _IPFW2_H
|
|
#define _IPFW2_H
|
|
|
|
/*
|
|
* The default rule number. By the design of ip_fw, the default rule
|
|
* is the last one, so its number can also serve as the highest number
|
|
* allowed for a rule. The ip_fw code relies on both meanings of this
|
|
* constant.
|
|
*/
|
|
#define IPFW_DEFAULT_RULE 65535
|
|
|
|
/*
|
|
* The number of ipfw tables. The maximum allowed table number is the
|
|
* (IPFW_TABLES_MAX - 1).
|
|
*/
|
|
#define IPFW_TABLES_MAX 128
|
|
|
|
/*
|
|
* Most commands (queue, pipe, tag, untag, limit...) can have a 16-bit
|
|
* argument between 1 and 65534. The value 0 is unused, the value
|
|
* 65535 (IP_FW_TABLEARG) is used to represent 'tablearg', i.e. the
|
|
* can be 1..65534, or 65535 to indicate the use of a 'tablearg'
|
|
* result of the most recent table() lookup.
|
|
* Note that 16bit is only a historical limit, resulting from
|
|
* the use of a 16-bit fields for that value. In reality, we can have
|
|
* 2^32 pipes, queues, tag values and so on, and use 0 as a tablearg.
|
|
*/
|
|
#define IPFW_ARG_MIN 1
|
|
#define IPFW_ARG_MAX 65534
|
|
#define IP_FW_TABLEARG 65535 /* XXX should use 0 */
|
|
|
|
/*
|
|
* The kernel representation of ipfw rules is made of a list of
|
|
* 'instructions' (for all practical purposes equivalent to BPF
|
|
* instructions), which specify which fields of the packet
|
|
* (or its metadata) should be analysed.
|
|
*
|
|
* Each instruction is stored in a structure which begins with
|
|
* "ipfw_insn", and can contain extra fields depending on the
|
|
* instruction type (listed below).
|
|
* Note that the code is written so that individual instructions
|
|
* have a size which is a multiple of 32 bits. This means that, if
|
|
* such structures contain pointers or other 64-bit entities,
|
|
* (there is just one instance now) they may end up unaligned on
|
|
* 64-bit architectures, so the must be handled with care.
|
|
*
|
|
* "enum ipfw_opcodes" are the opcodes supported. We can have up
|
|
* to 256 different opcodes. When adding new opcodes, they should
|
|
* be appended to the end of the opcode list before O_LAST_OPCODE,
|
|
* this will prevent the ABI from being broken, otherwise users
|
|
* will have to recompile ipfw(8) when they update the kernel.
|
|
*/
|
|
|
|
enum ipfw_opcodes { /* arguments (4 byte each) */
|
|
O_NOP,
|
|
|
|
O_IP_SRC, /* u32 = IP */
|
|
O_IP_SRC_MASK, /* ip = IP/mask */
|
|
O_IP_SRC_ME, /* none */
|
|
O_IP_SRC_SET, /* u32=base, arg1=len, bitmap */
|
|
|
|
O_IP_DST, /* u32 = IP */
|
|
O_IP_DST_MASK, /* ip = IP/mask */
|
|
O_IP_DST_ME, /* none */
|
|
O_IP_DST_SET, /* u32=base, arg1=len, bitmap */
|
|
|
|
O_IP_SRCPORT, /* (n)port list:mask 4 byte ea */
|
|
O_IP_DSTPORT, /* (n)port list:mask 4 byte ea */
|
|
O_PROTO, /* arg1=protocol */
|
|
|
|
O_MACADDR2, /* 2 mac addr:mask */
|
|
O_MAC_TYPE, /* same as srcport */
|
|
|
|
O_LAYER2, /* none */
|
|
O_IN, /* none */
|
|
O_FRAG, /* none */
|
|
|
|
O_RECV, /* none */
|
|
O_XMIT, /* none */
|
|
O_VIA, /* none */
|
|
|
|
O_IPOPT, /* arg1 = 2*u8 bitmap */
|
|
O_IPLEN, /* arg1 = len */
|
|
O_IPID, /* arg1 = id */
|
|
|
|
O_IPTOS, /* arg1 = id */
|
|
O_IPPRECEDENCE, /* arg1 = precedence << 5 */
|
|
O_IPTTL, /* arg1 = TTL */
|
|
|
|
O_IPVER, /* arg1 = version */
|
|
O_UID, /* u32 = id */
|
|
O_GID, /* u32 = id */
|
|
O_ESTAB, /* none (tcp established) */
|
|
O_TCPFLAGS, /* arg1 = 2*u8 bitmap */
|
|
O_TCPWIN, /* arg1 = desired win */
|
|
O_TCPSEQ, /* u32 = desired seq. */
|
|
O_TCPACK, /* u32 = desired seq. */
|
|
O_ICMPTYPE, /* u32 = icmp bitmap */
|
|
O_TCPOPTS, /* arg1 = 2*u8 bitmap */
|
|
|
|
O_VERREVPATH, /* none */
|
|
O_VERSRCREACH, /* none */
|
|
|
|
O_PROBE_STATE, /* none */
|
|
O_KEEP_STATE, /* none */
|
|
O_LIMIT, /* ipfw_insn_limit */
|
|
O_LIMIT_PARENT, /* dyn_type, not an opcode. */
|
|
|
|
/*
|
|
* These are really 'actions'.
|
|
*/
|
|
|
|
O_LOG, /* ipfw_insn_log */
|
|
O_PROB, /* u32 = match probability */
|
|
|
|
O_CHECK_STATE, /* none */
|
|
O_ACCEPT, /* none */
|
|
O_DENY, /* none */
|
|
O_REJECT, /* arg1=icmp arg (same as deny) */
|
|
O_COUNT, /* none */
|
|
O_SKIPTO, /* arg1=next rule number */
|
|
O_PIPE, /* arg1=pipe number */
|
|
O_QUEUE, /* arg1=queue number */
|
|
O_DIVERT, /* arg1=port number */
|
|
O_TEE, /* arg1=port number */
|
|
O_FORWARD_IP, /* fwd sockaddr */
|
|
O_FORWARD_MAC, /* fwd mac */
|
|
O_NAT, /* nope */
|
|
O_REASS, /* none */
|
|
|
|
/*
|
|
* More opcodes.
|
|
*/
|
|
O_IPSEC, /* has ipsec history */
|
|
O_IP_SRC_LOOKUP, /* arg1=table number, u32=value */
|
|
O_IP_DST_LOOKUP, /* arg1=table number, u32=value */
|
|
O_ANTISPOOF, /* none */
|
|
O_JAIL, /* u32 = id */
|
|
O_ALTQ, /* u32 = altq classif. qid */
|
|
O_DIVERTED, /* arg1=bitmap (1:loop, 2:out) */
|
|
O_TCPDATALEN, /* arg1 = tcp data len */
|
|
O_IP6_SRC, /* address without mask */
|
|
O_IP6_SRC_ME, /* my addresses */
|
|
O_IP6_SRC_MASK, /* address with the mask */
|
|
O_IP6_DST,
|
|
O_IP6_DST_ME,
|
|
O_IP6_DST_MASK,
|
|
O_FLOW6ID, /* for flow id tag in the ipv6 pkt */
|
|
O_ICMP6TYPE, /* icmp6 packet type filtering */
|
|
O_EXT_HDR, /* filtering for ipv6 extension header */
|
|
O_IP6,
|
|
|
|
/*
|
|
* actions for ng_ipfw
|
|
*/
|
|
O_NETGRAPH, /* send to ng_ipfw */
|
|
O_NGTEE, /* copy to ng_ipfw */
|
|
|
|
O_IP4,
|
|
|
|
O_UNREACH6, /* arg1=icmpv6 code arg (deny) */
|
|
|
|
O_TAG, /* arg1=tag number */
|
|
O_TAGGED, /* arg1=tag number */
|
|
|
|
O_SETFIB, /* arg1=FIB number */
|
|
O_FIB, /* arg1=FIB desired fib number */
|
|
|
|
O_LAST_OPCODE /* not an opcode! */
|
|
};
|
|
|
|
/*
|
|
* The extension header are filtered only for presence using a bit
|
|
* vector with a flag for each header.
|
|
*/
|
|
#define EXT_FRAGMENT 0x1
|
|
#define EXT_HOPOPTS 0x2
|
|
#define EXT_ROUTING 0x4
|
|
#define EXT_AH 0x8
|
|
#define EXT_ESP 0x10
|
|
#define EXT_DSTOPTS 0x20
|
|
#define EXT_RTHDR0 0x40
|
|
#define EXT_RTHDR2 0x80
|
|
|
|
/*
|
|
* Template for instructions.
|
|
*
|
|
* ipfw_insn is used for all instructions which require no operands,
|
|
* a single 16-bit value (arg1), or a couple of 8-bit values.
|
|
*
|
|
* For other instructions which require different/larger arguments
|
|
* we have derived structures, ipfw_insn_*.
|
|
*
|
|
* The size of the instruction (in 32-bit words) is in the low
|
|
* 6 bits of "len". The 2 remaining bits are used to implement
|
|
* NOT and OR on individual instructions. Given a type, you can
|
|
* compute the length to be put in "len" using F_INSN_SIZE(t)
|
|
*
|
|
* F_NOT negates the match result of the instruction.
|
|
*
|
|
* F_OR is used to build or blocks. By default, instructions
|
|
* are evaluated as part of a logical AND. An "or" block
|
|
* { X or Y or Z } contains F_OR set in all but the last
|
|
* instruction of the block. A match will cause the code
|
|
* to skip past the last instruction of the block.
|
|
*
|
|
* NOTA BENE: in a couple of places we assume that
|
|
* sizeof(ipfw_insn) == sizeof(u_int32_t)
|
|
* this needs to be fixed.
|
|
*
|
|
*/
|
|
typedef struct _ipfw_insn { /* template for instructions */
|
|
u_int8_t opcode;
|
|
u_int8_t len; /* number of 32-bit words */
|
|
#define F_NOT 0x80
|
|
#define F_OR 0x40
|
|
#define F_LEN_MASK 0x3f
|
|
#define F_LEN(cmd) ((cmd)->len & F_LEN_MASK)
|
|
|
|
u_int16_t arg1;
|
|
} ipfw_insn;
|
|
|
|
/*
|
|
* The F_INSN_SIZE(type) computes the size, in 4-byte words, of
|
|
* a given type.
|
|
*/
|
|
#define F_INSN_SIZE(t) ((sizeof (t))/sizeof(u_int32_t))
|
|
|
|
/*
|
|
* This is used to store an array of 16-bit entries (ports etc.)
|
|
*/
|
|
typedef struct _ipfw_insn_u16 {
|
|
ipfw_insn o;
|
|
u_int16_t ports[2]; /* there may be more */
|
|
} ipfw_insn_u16;
|
|
|
|
/*
|
|
* This is used to store an array of 32-bit entries
|
|
* (uid, single IPv4 addresses etc.)
|
|
*/
|
|
typedef struct _ipfw_insn_u32 {
|
|
ipfw_insn o;
|
|
u_int32_t d[1]; /* one or more */
|
|
} ipfw_insn_u32;
|
|
|
|
/*
|
|
* This is used to store IP addr-mask pairs.
|
|
*/
|
|
typedef struct _ipfw_insn_ip {
|
|
ipfw_insn o;
|
|
struct in_addr addr;
|
|
struct in_addr mask;
|
|
} ipfw_insn_ip;
|
|
|
|
/*
|
|
* This is used to forward to a given address (ip).
|
|
*/
|
|
typedef struct _ipfw_insn_sa {
|
|
ipfw_insn o;
|
|
struct sockaddr_in sa;
|
|
} ipfw_insn_sa;
|
|
|
|
/*
|
|
* This is used for MAC addr-mask pairs.
|
|
*/
|
|
typedef struct _ipfw_insn_mac {
|
|
ipfw_insn o;
|
|
u_char addr[12]; /* dst[6] + src[6] */
|
|
u_char mask[12]; /* dst[6] + src[6] */
|
|
} ipfw_insn_mac;
|
|
|
|
/*
|
|
* This is used for interface match rules (recv xx, xmit xx).
|
|
*/
|
|
typedef struct _ipfw_insn_if {
|
|
ipfw_insn o;
|
|
union {
|
|
struct in_addr ip;
|
|
int glob;
|
|
} p;
|
|
char name[IFNAMSIZ];
|
|
} ipfw_insn_if;
|
|
|
|
/*
|
|
* This is used for storing an altq queue id number.
|
|
*/
|
|
typedef struct _ipfw_insn_altq {
|
|
ipfw_insn o;
|
|
u_int32_t qid;
|
|
} ipfw_insn_altq;
|
|
|
|
/*
|
|
* This is used for limit rules.
|
|
*/
|
|
typedef struct _ipfw_insn_limit {
|
|
ipfw_insn o;
|
|
u_int8_t _pad;
|
|
u_int8_t limit_mask; /* combination of DYN_* below */
|
|
#define DYN_SRC_ADDR 0x1
|
|
#define DYN_SRC_PORT 0x2
|
|
#define DYN_DST_ADDR 0x4
|
|
#define DYN_DST_PORT 0x8
|
|
|
|
u_int16_t conn_limit;
|
|
} ipfw_insn_limit;
|
|
|
|
/*
|
|
* This is used for log instructions.
|
|
*/
|
|
typedef struct _ipfw_insn_log {
|
|
ipfw_insn o;
|
|
u_int32_t max_log; /* how many do we log -- 0 = all */
|
|
u_int32_t log_left; /* how many left to log */
|
|
} ipfw_insn_log;
|
|
|
|
/*
|
|
* Data structures required by both ipfw(8) and ipfw(4) but not part of the
|
|
* management API are protected by IPFW_INTERNAL.
|
|
*/
|
|
#ifdef IPFW_INTERNAL
|
|
/* Server pool support (LSNAT). */
|
|
struct cfg_spool {
|
|
LIST_ENTRY(cfg_spool) _next; /* chain of spool instances */
|
|
struct in_addr addr;
|
|
u_short port;
|
|
};
|
|
#endif
|
|
|
|
/* Redirect modes id. */
|
|
#define REDIR_ADDR 0x01
|
|
#define REDIR_PORT 0x02
|
|
#define REDIR_PROTO 0x04
|
|
|
|
#ifdef IPFW_INTERNAL
|
|
/* Nat redirect configuration. */
|
|
struct cfg_redir {
|
|
LIST_ENTRY(cfg_redir) _next; /* chain of redir instances */
|
|
u_int16_t mode; /* type of redirect mode */
|
|
struct in_addr laddr; /* local ip address */
|
|
struct in_addr paddr; /* public ip address */
|
|
struct in_addr raddr; /* remote ip address */
|
|
u_short lport; /* local port */
|
|
u_short pport; /* public port */
|
|
u_short rport; /* remote port */
|
|
u_short pport_cnt; /* number of public ports */
|
|
u_short rport_cnt; /* number of remote ports */
|
|
int proto; /* protocol: tcp/udp */
|
|
struct alias_link **alink;
|
|
/* num of entry in spool chain */
|
|
u_int16_t spool_cnt;
|
|
/* chain of spool instances */
|
|
LIST_HEAD(spool_chain, cfg_spool) spool_chain;
|
|
};
|
|
#endif
|
|
|
|
#define NAT_BUF_LEN 1024
|
|
|
|
#ifdef IPFW_INTERNAL
|
|
/* Nat configuration data struct. */
|
|
struct cfg_nat {
|
|
/* chain of nat instances */
|
|
LIST_ENTRY(cfg_nat) _next;
|
|
int id; /* nat id */
|
|
struct in_addr ip; /* nat ip address */
|
|
char if_name[IF_NAMESIZE]; /* interface name */
|
|
int mode; /* aliasing mode */
|
|
struct libalias *lib; /* libalias instance */
|
|
/* number of entry in spool chain */
|
|
int redir_cnt;
|
|
/* chain of redir instances */
|
|
LIST_HEAD(redir_chain, cfg_redir) redir_chain;
|
|
};
|
|
#endif
|
|
|
|
#define SOF_NAT sizeof(struct cfg_nat)
|
|
#define SOF_REDIR sizeof(struct cfg_redir)
|
|
#define SOF_SPOOL sizeof(struct cfg_spool)
|
|
|
|
/* Nat command. */
|
|
typedef struct _ipfw_insn_nat {
|
|
ipfw_insn o;
|
|
struct cfg_nat *nat;
|
|
} ipfw_insn_nat;
|
|
|
|
/* Apply ipv6 mask on ipv6 addr */
|
|
#define APPLY_MASK(addr,mask) \
|
|
(addr)->__u6_addr.__u6_addr32[0] &= (mask)->__u6_addr.__u6_addr32[0]; \
|
|
(addr)->__u6_addr.__u6_addr32[1] &= (mask)->__u6_addr.__u6_addr32[1]; \
|
|
(addr)->__u6_addr.__u6_addr32[2] &= (mask)->__u6_addr.__u6_addr32[2]; \
|
|
(addr)->__u6_addr.__u6_addr32[3] &= (mask)->__u6_addr.__u6_addr32[3];
|
|
|
|
/* Structure for ipv6 */
|
|
typedef struct _ipfw_insn_ip6 {
|
|
ipfw_insn o;
|
|
struct in6_addr addr6;
|
|
struct in6_addr mask6;
|
|
} ipfw_insn_ip6;
|
|
|
|
/* Used to support icmp6 types */
|
|
typedef struct _ipfw_insn_icmp6 {
|
|
ipfw_insn o;
|
|
uint32_t d[7]; /* XXX This number si related to the netinet/icmp6.h
|
|
* define ICMP6_MAXTYPE
|
|
* as follows: n = ICMP6_MAXTYPE/32 + 1
|
|
* Actually is 203
|
|
*/
|
|
} ipfw_insn_icmp6;
|
|
|
|
/*
|
|
* Here we have the structure representing an ipfw rule.
|
|
*
|
|
* It starts with a general area (with link fields and counters)
|
|
* followed by an array of one or more instructions, which the code
|
|
* accesses as an array of 32-bit values.
|
|
*
|
|
* Given a rule pointer r:
|
|
*
|
|
* r->cmd is the start of the first instruction.
|
|
* ACTION_PTR(r) is the start of the first action (things to do
|
|
* once a rule matched).
|
|
*
|
|
* When assembling instruction, remember the following:
|
|
*
|
|
* + if a rule has a "keep-state" (or "limit") option, then the
|
|
* first instruction (at r->cmd) MUST BE an O_PROBE_STATE
|
|
* + if a rule has a "log" option, then the first action
|
|
* (at ACTION_PTR(r)) MUST be O_LOG
|
|
* + if a rule has an "altq" option, it comes after "log"
|
|
* + if a rule has an O_TAG option, it comes after "log" and "altq"
|
|
*
|
|
* NOTE: we use a simple linked list of rules because we never need
|
|
* to delete a rule without scanning the list. We do not use
|
|
* queue(3) macros for portability and readability.
|
|
*/
|
|
|
|
struct ip_fw {
|
|
struct ip_fw *next; /* linked list of rules */
|
|
struct ip_fw *next_rule; /* ptr to next [skipto] rule */
|
|
/* 'next_rule' is used to pass up 'set_disable' status */
|
|
|
|
uint16_t act_ofs; /* offset of action in 32-bit units */
|
|
uint16_t cmd_len; /* # of 32-bit words in cmd */
|
|
uint16_t rulenum; /* rule number */
|
|
uint8_t set; /* rule set (0..31) */
|
|
#define RESVD_SET 31 /* set for default and persistent rules */
|
|
uint8_t _pad; /* padding */
|
|
uint32_t id; /* rule id */
|
|
|
|
/* These fields are present in all rules. */
|
|
uint64_t pcnt; /* Packet counter */
|
|
uint64_t bcnt; /* Byte counter */
|
|
uint32_t timestamp; /* tv_sec of last match */
|
|
|
|
ipfw_insn cmd[1]; /* storage for commands */
|
|
};
|
|
|
|
#define ACTION_PTR(rule) \
|
|
(ipfw_insn *)( (u_int32_t *)((rule)->cmd) + ((rule)->act_ofs) )
|
|
|
|
#define RULESIZE(rule) (sizeof(struct ip_fw) + \
|
|
((struct ip_fw *)(rule))->cmd_len * 4 - 4)
|
|
|
|
/*
|
|
* This structure is used as a flow mask and a flow id for various
|
|
* parts of the code.
|
|
*/
|
|
struct ipfw_flow_id {
|
|
u_int32_t dst_ip;
|
|
u_int32_t src_ip;
|
|
u_int16_t dst_port;
|
|
u_int16_t src_port;
|
|
u_int8_t fib;
|
|
u_int8_t proto;
|
|
u_int8_t flags; /* protocol-specific flags */
|
|
uint8_t addr_type; /* 4 = ipv4, 6 = ipv6, 1=ether ? */
|
|
struct in6_addr dst_ip6; /* could also store MAC addr! */
|
|
struct in6_addr src_ip6;
|
|
u_int32_t flow_id6;
|
|
u_int32_t frag_id6;
|
|
};
|
|
|
|
#define IS_IP6_FLOW_ID(id) ((id)->addr_type == 6)
|
|
|
|
/*
|
|
* Dynamic ipfw rule.
|
|
*/
|
|
typedef struct _ipfw_dyn_rule ipfw_dyn_rule;
|
|
|
|
struct _ipfw_dyn_rule {
|
|
ipfw_dyn_rule *next; /* linked list of rules. */
|
|
struct ip_fw *rule; /* pointer to rule */
|
|
/* 'rule' is used to pass up the rule number (from the parent) */
|
|
|
|
ipfw_dyn_rule *parent; /* pointer to parent rule */
|
|
u_int64_t pcnt; /* packet match counter */
|
|
u_int64_t bcnt; /* byte match counter */
|
|
struct ipfw_flow_id id; /* (masked) flow id */
|
|
u_int32_t expire; /* expire time */
|
|
u_int32_t bucket; /* which bucket in hash table */
|
|
u_int32_t state; /* state of this rule (typically a
|
|
* combination of TCP flags)
|
|
*/
|
|
u_int32_t ack_fwd; /* most recent ACKs in forward */
|
|
u_int32_t ack_rev; /* and reverse directions (used */
|
|
/* to generate keepalives) */
|
|
u_int16_t dyn_type; /* rule type */
|
|
u_int16_t count; /* refcount */
|
|
};
|
|
|
|
/*
|
|
* Definitions for IP option names.
|
|
*/
|
|
#define IP_FW_IPOPT_LSRR 0x01
|
|
#define IP_FW_IPOPT_SSRR 0x02
|
|
#define IP_FW_IPOPT_RR 0x04
|
|
#define IP_FW_IPOPT_TS 0x08
|
|
|
|
/*
|
|
* Definitions for TCP option names.
|
|
*/
|
|
#define IP_FW_TCPOPT_MSS 0x01
|
|
#define IP_FW_TCPOPT_WINDOW 0x02
|
|
#define IP_FW_TCPOPT_SACK 0x04
|
|
#define IP_FW_TCPOPT_TS 0x08
|
|
#define IP_FW_TCPOPT_CC 0x10
|
|
|
|
#define ICMP_REJECT_RST 0x100 /* fake ICMP code (send a TCP RST) */
|
|
#define ICMP6_UNREACH_RST 0x100 /* fake ICMPv6 code (send a TCP RST) */
|
|
|
|
/*
|
|
* These are used for lookup tables.
|
|
*/
|
|
typedef struct _ipfw_table_entry {
|
|
in_addr_t addr; /* network address */
|
|
u_int32_t value; /* value */
|
|
u_int16_t tbl; /* table number */
|
|
u_int8_t masklen; /* mask length */
|
|
} ipfw_table_entry;
|
|
|
|
typedef struct _ipfw_table {
|
|
u_int32_t size; /* size of entries in bytes */
|
|
u_int32_t cnt; /* # of entries */
|
|
u_int16_t tbl; /* table number */
|
|
ipfw_table_entry ent[0]; /* entries */
|
|
} ipfw_table;
|
|
|
|
#endif /* _IPFW2_H */
|