Adrian Chadd f28a552089 Migrate the TX sending code out from under the ath0 taskq and into ... the separate ath0 TX taskq. Whilst here, make sure that the TX software scheduler is also running out of the TX task, rather than the ath0 taskqueue. Make sure that the tx taskqueue is blocked/unblocked as necessary. This allows for a little more parallelism on multi-core machines, as well as (eventually) supporting a higher task priority for TX tasks, allowing said TX task to preempt an already running RX or TX completion task. Tested: * AR5416, AR9280 hostap and STA modes		2013-01-26 00:14:34 +00:00
..
ath_dfs/null	Add a method to explicitly disable radar reporting if required.	2013-01-02 01:36:10 +00:00
ath_hal	Place-holders for enable/active parameter flags.	2013-01-11 02:25:39 +00:00
ath_rate	I've had some feedback that CCK rates are more reliable than MCS 0	2012-10-31 06:35:50 +00:00
ah_osdep.c	Fix the HAL debugging to only use one bit to mark a message as unmaskable.	2012-07-01 02:34:32 +00:00
ah_osdep.h	Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.	2012-08-05 10:12:27 +00:00
if_ath_ahb.c	I give up - introduce a TX lock to serialise TX operations.	2012-10-31 06:27:58 +00:00
if_ath_alq.c	ath(4) ALQ logging improvements.	2012-11-16 19:39:29 +00:00
if_ath_alq.h	Add in specific TDMA logging types.	2012-11-27 02:24:05 +00:00
if_ath_beacon.c	Add a quick work-around if ath_beacon_config() to not die if it's called	2013-01-17 16:26:40 +00:00
if_ath_beacon.h	Extend the beacon code slightly to support AP mode beaconing for the	2012-08-11 23:26:19 +00:00
if_ath_debug.c	TX EDMA debugging fixes:	2012-11-05 07:08:45 +00:00
if_ath_debug.h	Add a debug method to dump the EDMA TX status descriptor contents out.	2012-11-03 04:53:44 +00:00
if_ath_keycache.c	Don't allocate or program a key for the AR5210.	2012-11-19 23:54:05 +00:00
if_ath_keycache.h
if_ath_led.c
if_ath_led.h
if_ath_misc.h	Migrate the TX sending code out from under the ath0 taskq and into	2013-01-26 00:14:34 +00:00
if_ath_pci.c	I give up - introduce a TX lock to serialise TX operations.	2012-10-31 06:27:58 +00:00
if_ath_rx_edma.c	Mechanically substitute flags from historic mbuf allocator with	2012-12-04 09:32:43 +00:00
if_ath_rx_edma.h	Begin abstracting out the RX path in preparation for RX EDMA support.	2012-07-03 06:59:12 +00:00
if_ath_rx.c	If we're doing a kickpcu, make sure we flush the whole RX list rather than	2013-01-13 22:41:58 +00:00
if_ath_rx.h	Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code.	2012-07-10 00:02:19 +00:00
if_ath_spectral.c	Fix format size.	2013-01-08 22:42:15 +00:00
if_ath_spectral.h	Add a new (skeleton) spectral mode manager module.	2013-01-02 03:59:02 +00:00
if_ath_sysctl.c	Implement frame (data) transmission using if_transmit(), rather than	2013-01-15 18:01:23 +00:00
if_ath_sysctl.h
if_ath_tdma.c	Pull out the debugging code from the critical path and make sure it	2012-11-28 01:55:22 +00:00
if_ath_tdma.h
if_ath_tsf.h
if_ath_tx_edma.c	Migrate the TX sending code out from under the ath0 taskq and into	2013-01-26 00:14:34 +00:00
if_ath_tx_edma.h	Begin separating out the TX DMA setup in preparation for TX EDMA support.	2012-07-23 03:52:18 +00:00
if_ath_tx_ht.c	Delete the per-TXQ locks and replace them with a single TX lock.	2012-12-02 06:24:08 +00:00
if_ath_tx_ht.h
if_ath_tx.c	Migrate the TX sending code out from under the ath0 taskq and into	2013-01-26 00:14:34 +00:00
if_ath_tx.h	ALQ logging enhancements:	2012-11-16 19:57:16 +00:00
if_ath.c	Migrate the TX sending code out from under the ath0 taskq and into	2013-01-26 00:14:34 +00:00
if_athdfs.h	Add a method to explicitly disable radar reporting if required.	2013-01-02 01:36:10 +00:00
if_athioctl.h	Add support for triggering spectral scan upon a channel reset/change.	2013-01-08 22:15:13 +00:00
if_athrate.h	Create an ioctl API for fetching the current rate control information.	2012-07-20 01:27:20 +00:00
if_athvar.h	Migrate CLRDMASK to be a per-node flag, rather than a per-TID flag.	2013-01-21 04:06:04 +00:00