freebsd-skq/sys/arm/at91/at91_st.c
Warner Losh 82645a84eb Tweak the disclaimer section of the license to match COPYRIGHT, for
better or worse.  Ok'd by folks that have additional copyrights to the
files in cases where there's joint authorship.
2008-11-25 00:13:26 +00:00

279 lines
6.9 KiB
C
Raw Blame History

/*-
* Copyright (c) 2005 Olivier Houchard. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/time.h>
#include <sys/bus.h>
#include <sys/resource.h>
#include <sys/rman.h>
#include <sys/timetc.h>
#include <sys/watchdog.h>
#include <machine/bus.h>
#include <machine/cpu.h>
#include <machine/cpufunc.h>
#include <machine/resource.h>
#include <machine/frame.h>
#include <machine/intr.h>
#include <arm/at91/at91rm92reg.h>
#include <arm/at91/at91var.h>
#include <arm/at91/at91_streg.h>
static struct at91st_softc {
bus_space_tag_t sc_st;
bus_space_handle_t sc_sh;
device_t sc_dev;
eventhandler_tag sc_wet; /* watchdog event handler tag */
} *timer_softc;
#define RD4(off) \
bus_space_read_4(timer_softc->sc_st, timer_softc->sc_sh, (off))
#define WR4(off, val) \
bus_space_write_4(timer_softc->sc_st, timer_softc->sc_sh, (off), (val))
static void at91st_watchdog(void *, u_int, int *);
static inline int
st_crtr(void)
{
int cur1, cur2;
do {
cur1 = RD4(ST_CRTR);
cur2 = RD4(ST_CRTR);
} while (cur1 != cur2);
return (cur1);
}
static unsigned at91st_get_timecount(struct timecounter *tc);
static struct timecounter at91st_timecounter = {
at91st_get_timecount, /* get_timecount */
NULL, /* no poll_pps */
#ifdef SKYEYE_WORKAROUNDS
0xffffffffu, /* counter_mask */
#else
0xfffffu, /* counter_mask */
#endif
32768, /* frequency */
"AT91RM9200 timer", /* name */
1000 /* quality */
};
static int
at91st_probe(device_t dev)
{
device_set_desc(dev, "ST");
return (0);
}
static int
at91st_attach(device_t dev)
{
struct at91_softc *sc = device_get_softc(device_get_parent(dev));
timer_softc = device_get_softc(dev);
timer_softc->sc_st = sc->sc_st;
timer_softc->sc_dev = dev;
if (bus_space_subregion(sc->sc_st, sc->sc_sh, AT91RM92_ST_BASE,
AT91RM92_ST_SIZE, &timer_softc->sc_sh) != 0)
panic("couldn't subregion timer registers");
/*
* Real time counter increments every clock cycle, need to set before
* initializing clocks so that DELAY works.
*/
WR4(ST_RTMR, 1);
/* Disable all interrupts */
WR4(ST_IDR, 0xffffffff);
/* disable watchdog timer */
WR4(ST_WDMR, 0);
timer_softc->sc_wet = EVENTHANDLER_REGISTER(watchdog_list,
at91st_watchdog, dev, 0);
device_printf(dev,
"watchdog registered, timeout intervall max. 64 sec\n");
return (0);
}
static device_method_t at91st_methods[] = {
DEVMETHOD(device_probe, at91st_probe),
DEVMETHOD(device_attach, at91st_attach),
{0, 0},
};
static driver_t at91st_driver = {
"at91_st",
at91st_methods,
sizeof(struct at91st_softc),
};
static devclass_t at91st_devclass;
DRIVER_MODULE(at91_st, atmelarm, at91st_driver, at91st_devclass, 0, 0);
#ifdef SKYEYE_WORKAROUNDS
static unsigned long tot_count = 0;
#endif
static unsigned
at91st_get_timecount(struct timecounter *tc)
{
#ifdef SKYEYE_WORKAROUNDS
return (tot_count);
#else
return (st_crtr());
#endif
}
/*
* t below is in a weird unit. The watchdog is set to 2^t
* nanoseconds. Since our watchdog timer can't really do that too
* well, we approximate it by assuming that the timeout interval for
* the lsb is 2^22 ns, which is 4.194ms. This is an overestimation of
* the actual time (3.906ms), but close enough for watchdogging.
* These approximations, though a violation of the spec, improve the
* performance of the application which typically specifies things as
* WD_TO_32SEC. In that last case, we'd wait 32s before the wdog
* reset. The spec says we should wait closer to 34s, but given how
* it is likely to be used, and the extremely coarse nature time
* interval, I think this is the best solution.
*/
static void
at91st_watchdog(void *argp, u_int cmd, int *error)
{
uint32_t wdog;
int t;
t = cmd & WD_INTERVAL;
if (t >= 22 && t <= 37) {
wdog = (1 << (t - 22)) | ST_WDMR_RSTEN;
*error = 0;
} else {
wdog = 0;
}
WR4(ST_WDMR, wdog);
WR4(ST_CR, ST_CR_WDRST);
}
static int
clock_intr(void *arg)
{
struct trapframe *fp = arg;
/* The interrupt is shared, so we have to make sure it's for us. */
if (RD4(ST_SR) & ST_SR_PITS) {
#ifdef SKYEYE_WORKAROUNDS
tot_count += 32768 / hz;
#endif
hardclock(TRAPF_USERMODE(fp), TRAPF_PC(fp));
return (FILTER_HANDLED);
}
return (FILTER_STRAY);
}
void
cpu_initclocks(void)
{
int rel_value;
struct resource *irq;
int rid = 0;
void *ih;
device_t dev = timer_softc->sc_dev;
rel_value = 32768 / hz;
if (rel_value < 1)
rel_value = 1;
if (32768 % hz) {
printf("Cannot get %d Hz clock; using %dHz\n", hz, 32768 / rel_value);
hz = 32768 / rel_value;
tick = 1000000 / hz;
}
/* Disable all interrupts.<2E>*/
WR4(ST_IDR, 0xffffffff);
/* The system timer shares the system irq (1) */
irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 1, 1, 1,
RF_ACTIVE | RF_SHAREABLE);
if (!irq)
panic("Unable to allocate irq for the system timer");
else
bus_setup_intr(dev, irq, INTR_TYPE_CLK,
clock_intr, NULL, NULL, &ih);
WR4(ST_PIMR, rel_value);
/* Enable PITS interrupts. */
WR4(ST_IER, ST_SR_PITS);
tc_init(&at91st_timecounter);
}
void
DELAY(int n)
{
uint32_t start, end, cur;
start = st_crtr();
n = (n * 1000) / 32768;
if (n <= 0)
n = 1;
end = (start + n) & ST_CRTR_MASK;
cur = start;
if (start > end) {
while (cur >= start || cur < end)
cur = st_crtr();
} else {
while (cur < end)
cur = st_crtr();
}
}
void
cpu_reset(void)
{
/*
* Reset the CPU by programmig the watchdog timer to reset the
* CPU after 128 'slow' clocks, or about ~4ms. Loop until
* the reset happens for safety.
*/
WR4(ST_WDMR, ST_WDMR_RSTEN | 2);
WR4(ST_CR, ST_CR_WDRST);
while (1)
continue;
}
void
cpu_startprofclock(void)
{
}
void
cpu_stopprofclock(void)
{
}