Adrian Chadd a47f39da1f Stop using the hardware register value byte order swapping for now, ... at least until I can root cause what's going on. The only platform I've seen this on is the AR9220 when attached to the AR71xx CPUs. I get immediate PCIe bus errors and all subsequent accesses cause further MIPS bus exceptions. I don't have any other big-endian platforms to test this on. If I get a chance (or two), I'll try to whack this on a bus analyser and see exactly what happens. I'd rather leave this on, especially for slower, embedded platforms. But the #ifdef hell is something I'm trying to avoid.		2012-04-19 03:26:21 +00:00
..
ath_dfs/null	Contribute some example code which demonstrates how to initialise the	2012-02-06 20:23:21 +00:00
ath_hal	Stop using the hardware register value byte order swapping for now,	2012-04-19 03:26:21 +00:00
ath_rate	Add in some debugging code to check whether the current rate table has	2012-02-26 06:04:44 +00:00
ah_osdep.c	Stop using the hardware register value byte order swapping for now,	2012-04-19 03:26:21 +00:00
ah_osdep.h	Stop using the hardware register value byte order swapping for now,	2012-04-19 03:26:21 +00:00
if_ath_ahb.c	Begin merging in some of my 802.11n TX aggregation driver changes.	2011-11-08 02:12:11 +00:00
if_ath_debug.c	Remove duplicate txflags field from ath_buf.	2012-04-07 02:01:26 +00:00
if_ath_debug.h	Add some new ath(4) debugging bits, from my if_ath_tx 11n TX branch.	2011-10-29 07:17:47 +00:00
if_ath_keycache.c	Add a 'vap' to ath_keyset().	2011-11-08 19:25:52 +00:00
if_ath_keycache.h	Add a 'vap' to ath_keyset().	2011-11-08 19:25:52 +00:00
if_ath_led.c	Since the only thing with a mux is the AR5416 and later, and we're now	2011-12-26 07:48:29 +00:00
if_ath_led.h	Refactor out the software LED config code into a common function, called	2011-12-26 05:46:22 +00:00
if_ath_misc.h	Introduce TX aggregation and software TX queue management	2011-11-08 22:43:13 +00:00
if_ath_pci.c	Override some default values to work around various issues in the deep,	2012-04-15 00:04:23 +00:00
if_ath_sysctl.c	Squirrel away SYNC interrupt debugging if it's enabled in the HAL.	2012-04-10 07:23:37 +00:00
if_ath_sysctl.h	Break out most of the HAL related tweaks into a per-HAL instance,	2011-06-23 02:38:36 +00:00
if_ath_tx_ht.c	As I thought, this is a bad idea. When forming aggregates, the RTS/CTS	2012-04-07 05:46:00 +00:00
if_ath_tx_ht.h	Introduce TX aggregation and software TX queue management	2011-11-08 22:43:13 +00:00
if_ath_tx.c	Migrate the net80211 TX aggregation state to be from per-AC to per-TID.	2012-04-15 20:29:39 +00:00
if_ath_tx.h	Delay sequence number allocation for A-MPDU until just before the frame	2012-03-20 04:50:25 +00:00
if_ath.c	Run the fatal proc as a proc, rather than where it currently is.	2012-04-17 06:02:41 +00:00
if_athdfs.h	Change the prototype so the radar enable can fail.	2012-01-28 21:44:42 +00:00
if_athioctl.h	Squirrel away SYNC interrupt debugging if it's enabled in the HAL.	2012-04-10 07:23:37 +00:00
if_athrate.h	Introduce TX aggregation and software TX queue management	2011-11-08 22:43:13 +00:00
if_athvar.h	Run the fatal proc as a proc, rather than where it currently is.	2012-04-17 06:02:41 +00:00