freebsd-skq/sys/dev/ena/ena_datapath.c
Marcin Wojtas 0835cc783b Add SPDX license tag to the ENA driver files
Refering to guide: https://wiki.freebsd.org/SPDX the SPDX tag should not
replace the standard license text, however it should be added over the
standard license text to make the automation easier.

Because of that, the old license was kept, but the SPDX tag was added
on top of every ENA driver file.

Submited by:    Michal Krawczyk <mk@semihalf.com>
Obtained from:  Semihalf
Sponsored by:   Amazon, Inc
MFC after:      1 week
Differential revision:  https://reviews.freebsd.org/D27117
2020-11-18 15:07:34 +00:00

1119 lines
31 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2015-2020 Amazon.com, Inc. or its affiliates.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_rss.h"
#include "ena.h"
#include "ena_datapath.h"
#ifdef DEV_NETMAP
#include "ena_netmap.h"
#endif /* DEV_NETMAP */
/*********************************************************************
* Static functions prototypes
*********************************************************************/
static int ena_tx_cleanup(struct ena_ring *);
static int ena_rx_cleanup(struct ena_ring *);
static inline int validate_tx_req_id(struct ena_ring *, uint16_t);
static void ena_rx_hash_mbuf(struct ena_ring *, struct ena_com_rx_ctx *,
struct mbuf *);
static struct mbuf* ena_rx_mbuf(struct ena_ring *, struct ena_com_rx_buf_info *,
struct ena_com_rx_ctx *, uint16_t *);
static inline void ena_rx_checksum(struct ena_ring *, struct ena_com_rx_ctx *,
struct mbuf *);
static void ena_tx_csum(struct ena_com_tx_ctx *, struct mbuf *, bool);
static int ena_check_and_collapse_mbuf(struct ena_ring *tx_ring,
struct mbuf **mbuf);
static int ena_xmit_mbuf(struct ena_ring *, struct mbuf **);
static void ena_start_xmit(struct ena_ring *);
/*********************************************************************
* Global functions
*********************************************************************/
void
ena_cleanup(void *arg, int pending)
{
struct ena_que *que = arg;
struct ena_adapter *adapter = que->adapter;
if_t ifp = adapter->ifp;
struct ena_ring *tx_ring;
struct ena_ring *rx_ring;
struct ena_com_io_cq* io_cq;
struct ena_eth_io_intr_reg intr_reg;
int qid, ena_qid;
int txc, rxc, i;
if (unlikely((if_getdrvflags(ifp) & IFF_DRV_RUNNING) == 0))
return;
ena_trace(NULL, ENA_DBG, "MSI-X TX/RX routine\n");
tx_ring = que->tx_ring;
rx_ring = que->rx_ring;
qid = que->id;
ena_qid = ENA_IO_TXQ_IDX(qid);
io_cq = &adapter->ena_dev->io_cq_queues[ena_qid];
tx_ring->first_interrupt = true;
rx_ring->first_interrupt = true;
for (i = 0; i < CLEAN_BUDGET; ++i) {
rxc = ena_rx_cleanup(rx_ring);
txc = ena_tx_cleanup(tx_ring);
if (unlikely((if_getdrvflags(ifp) & IFF_DRV_RUNNING) == 0))
return;
if ((txc != TX_BUDGET) && (rxc != RX_BUDGET))
break;
}
/* Signal that work is done and unmask interrupt */
ena_com_update_intr_reg(&intr_reg,
RX_IRQ_INTERVAL,
TX_IRQ_INTERVAL,
true);
ena_com_unmask_intr(io_cq, &intr_reg);
}
void
ena_deferred_mq_start(void *arg, int pending)
{
struct ena_ring *tx_ring = (struct ena_ring *)arg;
struct ifnet *ifp = tx_ring->adapter->ifp;
while (!drbr_empty(ifp, tx_ring->br) &&
tx_ring->running &&
(if_getdrvflags(ifp) & IFF_DRV_RUNNING) != 0) {
ENA_RING_MTX_LOCK(tx_ring);
ena_start_xmit(tx_ring);
ENA_RING_MTX_UNLOCK(tx_ring);
}
}
int
ena_mq_start(if_t ifp, struct mbuf *m)
{
struct ena_adapter *adapter = ifp->if_softc;
struct ena_ring *tx_ring;
int ret, is_drbr_empty;
uint32_t i;
if (unlikely((if_getdrvflags(adapter->ifp) & IFF_DRV_RUNNING) == 0))
return (ENODEV);
/* Which queue to use */
/*
* If everything is setup correctly, it should be the
* same bucket that the current CPU we're on is.
* It should improve performance.
*/
if (M_HASHTYPE_GET(m) != M_HASHTYPE_NONE) {
i = m->m_pkthdr.flowid % adapter->num_io_queues;
} else {
i = curcpu % adapter->num_io_queues;
}
tx_ring = &adapter->tx_ring[i];
/* Check if drbr is empty before putting packet */
is_drbr_empty = drbr_empty(ifp, tx_ring->br);
ret = drbr_enqueue(ifp, tx_ring->br, m);
if (unlikely(ret != 0)) {
taskqueue_enqueue(tx_ring->enqueue_tq, &tx_ring->enqueue_task);
return (ret);
}
if (is_drbr_empty && (ENA_RING_MTX_TRYLOCK(tx_ring) != 0)) {
ena_start_xmit(tx_ring);
ENA_RING_MTX_UNLOCK(tx_ring);
} else {
taskqueue_enqueue(tx_ring->enqueue_tq, &tx_ring->enqueue_task);
}
return (0);
}
void
ena_qflush(if_t ifp)
{
struct ena_adapter *adapter = ifp->if_softc;
struct ena_ring *tx_ring = adapter->tx_ring;
int i;
for(i = 0; i < adapter->num_io_queues; ++i, ++tx_ring)
if (!drbr_empty(ifp, tx_ring->br)) {
ENA_RING_MTX_LOCK(tx_ring);
drbr_flush(ifp, tx_ring->br);
ENA_RING_MTX_UNLOCK(tx_ring);
}
if_qflush(ifp);
}
/*********************************************************************
* Static functions
*********************************************************************/
static inline int
validate_tx_req_id(struct ena_ring *tx_ring, uint16_t req_id)
{
struct ena_adapter *adapter = tx_ring->adapter;
struct ena_tx_buffer *tx_info = NULL;
if (likely(req_id < tx_ring->ring_size)) {
tx_info = &tx_ring->tx_buffer_info[req_id];
if (tx_info->mbuf != NULL)
return (0);
device_printf(adapter->pdev,
"tx_info doesn't have valid mbuf\n");
}
device_printf(adapter->pdev, "Invalid req_id: %hu\n", req_id);
counter_u64_add(tx_ring->tx_stats.bad_req_id, 1);
/* Trigger device reset */
ena_trigger_reset(adapter, ENA_REGS_RESET_INV_TX_REQ_ID);
return (EFAULT);
}
/**
* ena_tx_cleanup - clear sent packets and corresponding descriptors
* @tx_ring: ring for which we want to clean packets
*
* Once packets are sent, we ask the device in a loop for no longer used
* descriptors. We find the related mbuf chain in a map (index in an array)
* and free it, then update ring state.
* This is performed in "endless" loop, updating ring pointers every
* TX_COMMIT. The first check of free descriptor is performed before the actual
* loop, then repeated at the loop end.
**/
static int
ena_tx_cleanup(struct ena_ring *tx_ring)
{
struct ena_adapter *adapter;
struct ena_com_io_cq* io_cq;
uint16_t next_to_clean;
uint16_t req_id;
uint16_t ena_qid;
unsigned int total_done = 0;
int rc;
int commit = TX_COMMIT;
int budget = TX_BUDGET;
int work_done;
bool above_thresh;
adapter = tx_ring->que->adapter;
ena_qid = ENA_IO_TXQ_IDX(tx_ring->que->id);
io_cq = &adapter->ena_dev->io_cq_queues[ena_qid];
next_to_clean = tx_ring->next_to_clean;
#ifdef DEV_NETMAP
if (netmap_tx_irq(adapter->ifp, tx_ring->qid) != NM_IRQ_PASS)
return (0);
#endif /* DEV_NETMAP */
do {
struct ena_tx_buffer *tx_info;
struct mbuf *mbuf;
rc = ena_com_tx_comp_req_id_get(io_cq, &req_id);
if (unlikely(rc != 0))
break;
rc = validate_tx_req_id(tx_ring, req_id);
if (unlikely(rc != 0))
break;
tx_info = &tx_ring->tx_buffer_info[req_id];
mbuf = tx_info->mbuf;
tx_info->mbuf = NULL;
bintime_clear(&tx_info->timestamp);
bus_dmamap_sync(adapter->tx_buf_tag, tx_info->dmamap,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(adapter->tx_buf_tag,
tx_info->dmamap);
ena_trace(NULL, ENA_DBG | ENA_TXPTH, "tx: q %d mbuf %p completed\n",
tx_ring->qid, mbuf);
m_freem(mbuf);
total_done += tx_info->tx_descs;
tx_ring->free_tx_ids[next_to_clean] = req_id;
next_to_clean = ENA_TX_RING_IDX_NEXT(next_to_clean,
tx_ring->ring_size);
if (unlikely(--commit == 0)) {
commit = TX_COMMIT;
/* update ring state every TX_COMMIT descriptor */
tx_ring->next_to_clean = next_to_clean;
ena_com_comp_ack(
&adapter->ena_dev->io_sq_queues[ena_qid],
total_done);
ena_com_update_dev_comp_head(io_cq);
total_done = 0;
}
} while (likely(--budget));
work_done = TX_BUDGET - budget;
ena_trace(NULL, ENA_DBG | ENA_TXPTH, "tx: q %d done. total pkts: %d\n",
tx_ring->qid, work_done);
/* If there is still something to commit update ring state */
if (likely(commit != TX_COMMIT)) {
tx_ring->next_to_clean = next_to_clean;
ena_com_comp_ack(&adapter->ena_dev->io_sq_queues[ena_qid],
total_done);
ena_com_update_dev_comp_head(io_cq);
}
/*
* Need to make the rings circular update visible to
* ena_xmit_mbuf() before checking for tx_ring->running.
*/
mb();
above_thresh = ena_com_sq_have_enough_space(tx_ring->ena_com_io_sq,
ENA_TX_RESUME_THRESH);
if (unlikely(!tx_ring->running && above_thresh)) {
ENA_RING_MTX_LOCK(tx_ring);
above_thresh =
ena_com_sq_have_enough_space(tx_ring->ena_com_io_sq,
ENA_TX_RESUME_THRESH);
if (!tx_ring->running && above_thresh) {
tx_ring->running = true;
counter_u64_add(tx_ring->tx_stats.queue_wakeup, 1);
taskqueue_enqueue(tx_ring->enqueue_tq,
&tx_ring->enqueue_task);
}
ENA_RING_MTX_UNLOCK(tx_ring);
}
return (work_done);
}
static void
ena_rx_hash_mbuf(struct ena_ring *rx_ring, struct ena_com_rx_ctx *ena_rx_ctx,
struct mbuf *mbuf)
{
struct ena_adapter *adapter = rx_ring->adapter;
if (likely(ENA_FLAG_ISSET(ENA_FLAG_RSS_ACTIVE, adapter))) {
mbuf->m_pkthdr.flowid = ena_rx_ctx->hash;
#ifdef RSS
/*
* Hardware and software RSS are in agreement only when both are
* configured to Toeplitz algorithm. This driver configures
* that algorithm only when software RSS is enabled and uses it.
*/
if (adapter->ena_dev->rss.hash_func != ENA_ADMIN_TOEPLITZ &&
ena_rx_ctx->l3_proto != ENA_ETH_IO_L3_PROTO_UNKNOWN) {
M_HASHTYPE_SET(mbuf, M_HASHTYPE_OPAQUE_HASH);
return;
}
#endif
if (ena_rx_ctx->frag &&
(ena_rx_ctx->l3_proto != ENA_ETH_IO_L3_PROTO_UNKNOWN)) {
M_HASHTYPE_SET(mbuf, M_HASHTYPE_OPAQUE_HASH);
return;
}
switch (ena_rx_ctx->l3_proto) {
case ENA_ETH_IO_L3_PROTO_IPV4:
switch (ena_rx_ctx->l4_proto) {
case ENA_ETH_IO_L4_PROTO_TCP:
M_HASHTYPE_SET(mbuf, M_HASHTYPE_RSS_TCP_IPV4);
break;
case ENA_ETH_IO_L4_PROTO_UDP:
M_HASHTYPE_SET(mbuf, M_HASHTYPE_RSS_UDP_IPV4);
break;
default:
M_HASHTYPE_SET(mbuf, M_HASHTYPE_RSS_IPV4);
}
break;
case ENA_ETH_IO_L3_PROTO_IPV6:
switch (ena_rx_ctx->l4_proto) {
case ENA_ETH_IO_L4_PROTO_TCP:
M_HASHTYPE_SET(mbuf, M_HASHTYPE_RSS_TCP_IPV6);
break;
case ENA_ETH_IO_L4_PROTO_UDP:
M_HASHTYPE_SET(mbuf, M_HASHTYPE_RSS_UDP_IPV6);
break;
default:
M_HASHTYPE_SET(mbuf, M_HASHTYPE_RSS_IPV6);
}
break;
case ENA_ETH_IO_L3_PROTO_UNKNOWN:
M_HASHTYPE_SET(mbuf, M_HASHTYPE_NONE);
break;
default:
M_HASHTYPE_SET(mbuf, M_HASHTYPE_OPAQUE_HASH);
}
} else {
mbuf->m_pkthdr.flowid = rx_ring->qid;
M_HASHTYPE_SET(mbuf, M_HASHTYPE_NONE);
}
}
/**
* ena_rx_mbuf - assemble mbuf from descriptors
* @rx_ring: ring for which we want to clean packets
* @ena_bufs: buffer info
* @ena_rx_ctx: metadata for this packet(s)
* @next_to_clean: ring pointer, will be updated only upon success
*
**/
static struct mbuf*
ena_rx_mbuf(struct ena_ring *rx_ring, struct ena_com_rx_buf_info *ena_bufs,
struct ena_com_rx_ctx *ena_rx_ctx, uint16_t *next_to_clean)
{
struct mbuf *mbuf;
struct ena_rx_buffer *rx_info;
struct ena_adapter *adapter;
unsigned int descs = ena_rx_ctx->descs;
uint16_t ntc, len, req_id, buf = 0;
ntc = *next_to_clean;
adapter = rx_ring->adapter;
len = ena_bufs[buf].len;
req_id = ena_bufs[buf].req_id;
rx_info = &rx_ring->rx_buffer_info[req_id];
if (unlikely(rx_info->mbuf == NULL)) {
device_printf(adapter->pdev, "NULL mbuf in rx_info");
return (NULL);
}
ena_trace(NULL, ENA_DBG | ENA_RXPTH, "rx_info %p, mbuf %p, paddr %jx\n",
rx_info, rx_info->mbuf, (uintmax_t)rx_info->ena_buf.paddr);
bus_dmamap_sync(adapter->rx_buf_tag, rx_info->map,
BUS_DMASYNC_POSTREAD);
mbuf = rx_info->mbuf;
mbuf->m_flags |= M_PKTHDR;
mbuf->m_pkthdr.len = len;
mbuf->m_len = len;
// Only for the first segment the data starts at specific offset
mbuf->m_data = mtodo(mbuf, ena_rx_ctx->pkt_offset);
ena_trace(NULL, ENA_DBG | ENA_RXPTH,
"Mbuf data offset=%u\n", ena_rx_ctx->pkt_offset);
mbuf->m_pkthdr.rcvif = rx_ring->que->adapter->ifp;
/* Fill mbuf with hash key and it's interpretation for optimization */
ena_rx_hash_mbuf(rx_ring, ena_rx_ctx, mbuf);
ena_trace(NULL, ENA_DBG | ENA_RXPTH, "rx mbuf 0x%p, flags=0x%x, len: %d\n",
mbuf, mbuf->m_flags, mbuf->m_pkthdr.len);
/* DMA address is not needed anymore, unmap it */
bus_dmamap_unload(rx_ring->adapter->rx_buf_tag, rx_info->map);
rx_info->mbuf = NULL;
rx_ring->free_rx_ids[ntc] = req_id;
ntc = ENA_RX_RING_IDX_NEXT(ntc, rx_ring->ring_size);
/*
* While we have more than 1 descriptors for one rcvd packet, append
* other mbufs to the main one
*/
while (--descs) {
++buf;
len = ena_bufs[buf].len;
req_id = ena_bufs[buf].req_id;
rx_info = &rx_ring->rx_buffer_info[req_id];
if (unlikely(rx_info->mbuf == NULL)) {
device_printf(adapter->pdev, "NULL mbuf in rx_info");
/*
* If one of the required mbufs was not allocated yet,
* we can break there.
* All earlier used descriptors will be reallocated
* later and not used mbufs can be reused.
* The next_to_clean pointer will not be updated in case
* of an error, so caller should advance it manually
* in error handling routine to keep it up to date
* with hw ring.
*/
m_freem(mbuf);
return (NULL);
}
bus_dmamap_sync(adapter->rx_buf_tag, rx_info->map,
BUS_DMASYNC_POSTREAD);
if (unlikely(m_append(mbuf, len, rx_info->mbuf->m_data) == 0)) {
counter_u64_add(rx_ring->rx_stats.mbuf_alloc_fail, 1);
ena_trace(NULL, ENA_WARNING, "Failed to append Rx mbuf %p\n",
mbuf);
}
ena_trace(NULL, ENA_DBG | ENA_RXPTH,
"rx mbuf updated. len %d\n", mbuf->m_pkthdr.len);
/* Free already appended mbuf, it won't be useful anymore */
bus_dmamap_unload(rx_ring->adapter->rx_buf_tag, rx_info->map);
m_freem(rx_info->mbuf);
rx_info->mbuf = NULL;
rx_ring->free_rx_ids[ntc] = req_id;
ntc = ENA_RX_RING_IDX_NEXT(ntc, rx_ring->ring_size);
}
*next_to_clean = ntc;
return (mbuf);
}
/**
* ena_rx_checksum - indicate in mbuf if hw indicated a good cksum
**/
static inline void
ena_rx_checksum(struct ena_ring *rx_ring, struct ena_com_rx_ctx *ena_rx_ctx,
struct mbuf *mbuf)
{
/* if IP and error */
if (unlikely((ena_rx_ctx->l3_proto == ENA_ETH_IO_L3_PROTO_IPV4) &&
ena_rx_ctx->l3_csum_err)) {
/* ipv4 checksum error */
mbuf->m_pkthdr.csum_flags = 0;
counter_u64_add(rx_ring->rx_stats.bad_csum, 1);
ena_trace(NULL, ENA_DBG, "RX IPv4 header checksum error\n");
return;
}
/* if TCP/UDP */
if ((ena_rx_ctx->l4_proto == ENA_ETH_IO_L4_PROTO_TCP) ||
(ena_rx_ctx->l4_proto == ENA_ETH_IO_L4_PROTO_UDP)) {
if (ena_rx_ctx->l4_csum_err) {
/* TCP/UDP checksum error */
mbuf->m_pkthdr.csum_flags = 0;
counter_u64_add(rx_ring->rx_stats.bad_csum, 1);
ena_trace(NULL, ENA_DBG, "RX L4 checksum error\n");
} else {
mbuf->m_pkthdr.csum_flags = CSUM_IP_CHECKED;
mbuf->m_pkthdr.csum_flags |= CSUM_IP_VALID;
}
}
}
/**
* ena_rx_cleanup - handle rx irq
* @arg: ring for which irq is being handled
**/
static int
ena_rx_cleanup(struct ena_ring *rx_ring)
{
struct ena_adapter *adapter;
struct mbuf *mbuf;
struct ena_com_rx_ctx ena_rx_ctx;
struct ena_com_io_cq* io_cq;
struct ena_com_io_sq* io_sq;
enum ena_regs_reset_reason_types reset_reason;
if_t ifp;
uint16_t ena_qid;
uint16_t next_to_clean;
uint32_t refill_required;
uint32_t refill_threshold;
uint32_t do_if_input = 0;
unsigned int qid;
int rc, i;
int budget = RX_BUDGET;
#ifdef DEV_NETMAP
int done;
#endif /* DEV_NETMAP */
adapter = rx_ring->que->adapter;
ifp = adapter->ifp;
qid = rx_ring->que->id;
ena_qid = ENA_IO_RXQ_IDX(qid);
io_cq = &adapter->ena_dev->io_cq_queues[ena_qid];
io_sq = &adapter->ena_dev->io_sq_queues[ena_qid];
next_to_clean = rx_ring->next_to_clean;
#ifdef DEV_NETMAP
if (netmap_rx_irq(adapter->ifp, rx_ring->qid, &done) != NM_IRQ_PASS)
return (0);
#endif /* DEV_NETMAP */
ena_trace(NULL, ENA_DBG, "rx: qid %d\n", qid);
do {
ena_rx_ctx.ena_bufs = rx_ring->ena_bufs;
ena_rx_ctx.max_bufs = adapter->max_rx_sgl_size;
ena_rx_ctx.descs = 0;
ena_rx_ctx.pkt_offset = 0;
bus_dmamap_sync(io_cq->cdesc_addr.mem_handle.tag,
io_cq->cdesc_addr.mem_handle.map, BUS_DMASYNC_POSTREAD);
rc = ena_com_rx_pkt(io_cq, io_sq, &ena_rx_ctx);
if (unlikely(rc != 0)) {
if (rc == ENA_COM_NO_SPACE) {
counter_u64_add(rx_ring->rx_stats.bad_desc_num,
1);
reset_reason = ENA_REGS_RESET_TOO_MANY_RX_DESCS;
} else {
counter_u64_add(rx_ring->rx_stats.bad_req_id,
1);
reset_reason = ENA_REGS_RESET_INV_RX_REQ_ID;
}
ena_trigger_reset(adapter, reset_reason);
return (0);
}
if (unlikely(ena_rx_ctx.descs == 0))
break;
ena_trace(NULL, ENA_DBG | ENA_RXPTH, "rx: q %d got packet from ena. "
"descs #: %d l3 proto %d l4 proto %d hash: %x\n",
rx_ring->qid, ena_rx_ctx.descs, ena_rx_ctx.l3_proto,
ena_rx_ctx.l4_proto, ena_rx_ctx.hash);
/* Receive mbuf from the ring */
mbuf = ena_rx_mbuf(rx_ring, rx_ring->ena_bufs,
&ena_rx_ctx, &next_to_clean);
bus_dmamap_sync(io_cq->cdesc_addr.mem_handle.tag,
io_cq->cdesc_addr.mem_handle.map, BUS_DMASYNC_PREREAD);
/* Exit if we failed to retrieve a buffer */
if (unlikely(mbuf == NULL)) {
for (i = 0; i < ena_rx_ctx.descs; ++i) {
rx_ring->free_rx_ids[next_to_clean] =
rx_ring->ena_bufs[i].req_id;
next_to_clean =
ENA_RX_RING_IDX_NEXT(next_to_clean,
rx_ring->ring_size);
}
break;
}
if (((ifp->if_capenable & IFCAP_RXCSUM) != 0) ||
((ifp->if_capenable & IFCAP_RXCSUM_IPV6) != 0)) {
ena_rx_checksum(rx_ring, &ena_rx_ctx, mbuf);
}
counter_enter();
counter_u64_add_protected(rx_ring->rx_stats.bytes,
mbuf->m_pkthdr.len);
counter_u64_add_protected(adapter->hw_stats.rx_bytes,
mbuf->m_pkthdr.len);
counter_exit();
/*
* LRO is only for IP/TCP packets and TCP checksum of the packet
* should be computed by hardware.
*/
do_if_input = 1;
if (((ifp->if_capenable & IFCAP_LRO) != 0) &&
((mbuf->m_pkthdr.csum_flags & CSUM_IP_VALID) != 0) &&
(ena_rx_ctx.l4_proto == ENA_ETH_IO_L4_PROTO_TCP)) {
/*
* Send to the stack if:
* - LRO not enabled, or
* - no LRO resources, or
* - lro enqueue fails
*/
if ((rx_ring->lro.lro_cnt != 0) &&
(tcp_lro_rx(&rx_ring->lro, mbuf, 0) == 0))
do_if_input = 0;
}
if (do_if_input != 0) {
ena_trace(NULL, ENA_DBG | ENA_RXPTH,
"calling if_input() with mbuf %p\n", mbuf);
(*ifp->if_input)(ifp, mbuf);
}
counter_enter();
counter_u64_add_protected(rx_ring->rx_stats.cnt, 1);
counter_u64_add_protected(adapter->hw_stats.rx_packets, 1);
counter_exit();
} while (--budget);
rx_ring->next_to_clean = next_to_clean;
refill_required = ena_com_free_q_entries(io_sq);
refill_threshold = min_t(int,
rx_ring->ring_size / ENA_RX_REFILL_THRESH_DIVIDER,
ENA_RX_REFILL_THRESH_PACKET);
if (refill_required > refill_threshold) {
ena_com_update_dev_comp_head(rx_ring->ena_com_io_cq);
ena_refill_rx_bufs(rx_ring, refill_required);
}
tcp_lro_flush_all(&rx_ring->lro);
return (RX_BUDGET - budget);
}
static void
ena_tx_csum(struct ena_com_tx_ctx *ena_tx_ctx, struct mbuf *mbuf,
bool disable_meta_caching)
{
struct ena_com_tx_meta *ena_meta;
struct ether_vlan_header *eh;
struct mbuf *mbuf_next;
u32 mss;
bool offload;
uint16_t etype;
int ehdrlen;
struct ip *ip;
int iphlen;
struct tcphdr *th;
int offset;
offload = false;
ena_meta = &ena_tx_ctx->ena_meta;
mss = mbuf->m_pkthdr.tso_segsz;
if (mss != 0)
offload = true;
if ((mbuf->m_pkthdr.csum_flags & CSUM_TSO) != 0)
offload = true;
if ((mbuf->m_pkthdr.csum_flags & CSUM_OFFLOAD) != 0)
offload = true;
if (!offload) {
if (disable_meta_caching) {
memset(ena_meta, 0, sizeof(*ena_meta));
ena_tx_ctx->meta_valid = 1;
} else {
ena_tx_ctx->meta_valid = 0;
}
return;
}
/* Determine where frame payload starts. */
eh = mtod(mbuf, struct ether_vlan_header *);
if (eh->evl_encap_proto == htons(ETHERTYPE_VLAN)) {
etype = ntohs(eh->evl_proto);
ehdrlen = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN;
} else {
etype = ntohs(eh->evl_encap_proto);
ehdrlen = ETHER_HDR_LEN;
}
mbuf_next = m_getptr(mbuf, ehdrlen, &offset);
ip = (struct ip *)(mtodo(mbuf_next, offset));
iphlen = ip->ip_hl << 2;
mbuf_next = m_getptr(mbuf, iphlen + ehdrlen, &offset);
th = (struct tcphdr *)(mtodo(mbuf_next, offset));
if ((mbuf->m_pkthdr.csum_flags & CSUM_IP) != 0) {
ena_tx_ctx->l3_csum_enable = 1;
}
if ((mbuf->m_pkthdr.csum_flags & CSUM_TSO) != 0) {
ena_tx_ctx->tso_enable = 1;
ena_meta->l4_hdr_len = (th->th_off);
}
switch (etype) {
case ETHERTYPE_IP:
ena_tx_ctx->l3_proto = ENA_ETH_IO_L3_PROTO_IPV4;
if ((ip->ip_off & htons(IP_DF)) != 0)
ena_tx_ctx->df = 1;
break;
case ETHERTYPE_IPV6:
ena_tx_ctx->l3_proto = ENA_ETH_IO_L3_PROTO_IPV6;
default:
break;
}
if (ip->ip_p == IPPROTO_TCP) {
ena_tx_ctx->l4_proto = ENA_ETH_IO_L4_PROTO_TCP;
if ((mbuf->m_pkthdr.csum_flags &
(CSUM_IP_TCP | CSUM_IP6_TCP)) != 0)
ena_tx_ctx->l4_csum_enable = 1;
else
ena_tx_ctx->l4_csum_enable = 0;
} else if (ip->ip_p == IPPROTO_UDP) {
ena_tx_ctx->l4_proto = ENA_ETH_IO_L4_PROTO_UDP;
if ((mbuf->m_pkthdr.csum_flags &
(CSUM_IP_UDP | CSUM_IP6_UDP)) != 0)
ena_tx_ctx->l4_csum_enable = 1;
else
ena_tx_ctx->l4_csum_enable = 0;
} else {
ena_tx_ctx->l4_proto = ENA_ETH_IO_L4_PROTO_UNKNOWN;
ena_tx_ctx->l4_csum_enable = 0;
}
ena_meta->mss = mss;
ena_meta->l3_hdr_len = iphlen;
ena_meta->l3_hdr_offset = ehdrlen;
ena_tx_ctx->meta_valid = 1;
}
static int
ena_check_and_collapse_mbuf(struct ena_ring *tx_ring, struct mbuf **mbuf)
{
struct ena_adapter *adapter;
struct mbuf *collapsed_mbuf;
int num_frags;
adapter = tx_ring->adapter;
num_frags = ena_mbuf_count(*mbuf);
/* One segment must be reserved for configuration descriptor. */
if (num_frags < adapter->max_tx_sgl_size)
return (0);
counter_u64_add(tx_ring->tx_stats.collapse, 1);
collapsed_mbuf = m_collapse(*mbuf, M_NOWAIT,
adapter->max_tx_sgl_size - 1);
if (unlikely(collapsed_mbuf == NULL)) {
counter_u64_add(tx_ring->tx_stats.collapse_err, 1);
return (ENOMEM);
}
/* If mbuf was collapsed succesfully, original mbuf is released. */
*mbuf = collapsed_mbuf;
return (0);
}
static int
ena_tx_map_mbuf(struct ena_ring *tx_ring, struct ena_tx_buffer *tx_info,
struct mbuf *mbuf, void **push_hdr, u16 *header_len)
{
struct ena_adapter *adapter = tx_ring->adapter;
struct ena_com_buf *ena_buf;
bus_dma_segment_t segs[ENA_BUS_DMA_SEGS];
size_t iseg = 0;
uint32_t mbuf_head_len;
uint16_t offset;
int rc, nsegs;
mbuf_head_len = mbuf->m_len;
tx_info->mbuf = mbuf;
ena_buf = tx_info->bufs;
/*
* For easier maintaining of the DMA map, map the whole mbuf even if
* the LLQ is used. The descriptors will be filled using the segments.
*/
rc = bus_dmamap_load_mbuf_sg(adapter->tx_buf_tag, tx_info->dmamap, mbuf,
segs, &nsegs, BUS_DMA_NOWAIT);
if (unlikely((rc != 0) || (nsegs == 0))) {
ena_trace(NULL, ENA_WARNING,
"dmamap load failed! err: %d nsegs: %d\n", rc, nsegs);
goto dma_error;
}
if (tx_ring->tx_mem_queue_type == ENA_ADMIN_PLACEMENT_POLICY_DEV) {
/*
* When the device is LLQ mode, the driver will copy
* the header into the device memory space.
* the ena_com layer assumes the header is in a linear
* memory space.
* This assumption might be wrong since part of the header
* can be in the fragmented buffers.
* First check if header fits in the mbuf. If not, copy it to
* separate buffer that will be holding linearized data.
*/
*header_len = min_t(uint32_t, mbuf->m_pkthdr.len, tx_ring->tx_max_header_size);
/* If header is in linear space, just point into mbuf's data. */
if (likely(*header_len <= mbuf_head_len)) {
*push_hdr = mbuf->m_data;
/*
* Otherwise, copy whole portion of header from multiple mbufs
* to intermediate buffer.
*/
} else {
m_copydata(mbuf, 0, *header_len, tx_ring->push_buf_intermediate_buf);
*push_hdr = tx_ring->push_buf_intermediate_buf;
counter_u64_add(tx_ring->tx_stats.llq_buffer_copy, 1);
}
ena_trace(NULL, ENA_DBG | ENA_TXPTH,
"mbuf: %p header_buf->vaddr: %p push_len: %d\n",
mbuf, *push_hdr, *header_len);
/* If packet is fitted in LLQ header, no need for DMA segments. */
if (mbuf->m_pkthdr.len <= tx_ring->tx_max_header_size) {
return (0);
} else {
offset = tx_ring->tx_max_header_size;
/*
* As Header part is mapped to LLQ header, we can skip it and just
* map the residuum of the mbuf to DMA Segments.
*/
while (offset > 0) {
if (offset >= segs[iseg].ds_len) {
offset -= segs[iseg].ds_len;
} else {
ena_buf->paddr = segs[iseg].ds_addr + offset;
ena_buf->len = segs[iseg].ds_len - offset;
ena_buf++;
tx_info->num_of_bufs++;
offset = 0;
}
iseg++;
}
}
} else {
*push_hdr = NULL;
/*
* header_len is just a hint for the device. Because FreeBSD is not
* giving us information about packet header length and it is not
* guaranteed that all packet headers will be in the 1st mbuf, setting
* header_len to 0 is making the device ignore this value and resolve
* header on it's own.
*/
*header_len = 0;
}
/* Map rest of the mbuf */
while (iseg < nsegs) {
ena_buf->paddr = segs[iseg].ds_addr;
ena_buf->len = segs[iseg].ds_len;
ena_buf++;
iseg++;
tx_info->num_of_bufs++;
}
return (0);
dma_error:
counter_u64_add(tx_ring->tx_stats.dma_mapping_err, 1);
tx_info->mbuf = NULL;
return (rc);
}
static int
ena_xmit_mbuf(struct ena_ring *tx_ring, struct mbuf **mbuf)
{
struct ena_adapter *adapter;
struct ena_tx_buffer *tx_info;
struct ena_com_tx_ctx ena_tx_ctx;
struct ena_com_dev *ena_dev;
struct ena_com_io_sq* io_sq;
void *push_hdr;
uint16_t next_to_use;
uint16_t req_id;
uint16_t ena_qid;
uint16_t header_len;
int rc;
int nb_hw_desc;
ena_qid = ENA_IO_TXQ_IDX(tx_ring->que->id);
adapter = tx_ring->que->adapter;
ena_dev = adapter->ena_dev;
io_sq = &ena_dev->io_sq_queues[ena_qid];
rc = ena_check_and_collapse_mbuf(tx_ring, mbuf);
if (unlikely(rc != 0)) {
ena_trace(NULL, ENA_WARNING,
"Failed to collapse mbuf! err: %d\n", rc);
return (rc);
}
ena_trace(NULL, ENA_DBG | ENA_TXPTH, "Tx: %d bytes\n", (*mbuf)->m_pkthdr.len);
next_to_use = tx_ring->next_to_use;
req_id = tx_ring->free_tx_ids[next_to_use];
tx_info = &tx_ring->tx_buffer_info[req_id];
tx_info->num_of_bufs = 0;
rc = ena_tx_map_mbuf(tx_ring, tx_info, *mbuf, &push_hdr, &header_len);
if (unlikely(rc != 0)) {
ena_trace(NULL, ENA_WARNING, "Failed to map TX mbuf\n");
return (rc);
}
memset(&ena_tx_ctx, 0x0, sizeof(struct ena_com_tx_ctx));
ena_tx_ctx.ena_bufs = tx_info->bufs;
ena_tx_ctx.push_header = push_hdr;
ena_tx_ctx.num_bufs = tx_info->num_of_bufs;
ena_tx_ctx.req_id = req_id;
ena_tx_ctx.header_len = header_len;
/* Set flags and meta data */
ena_tx_csum(&ena_tx_ctx, *mbuf, adapter->disable_meta_caching);
if (tx_ring->acum_pkts == DB_THRESHOLD ||
ena_com_is_doorbell_needed(tx_ring->ena_com_io_sq, &ena_tx_ctx)) {
ena_trace(NULL, ENA_DBG | ENA_TXPTH,
"llq tx max burst size of queue %d achieved, writing doorbell to send burst\n",
tx_ring->que->id);
ena_com_write_sq_doorbell(tx_ring->ena_com_io_sq);
counter_u64_add(tx_ring->tx_stats.doorbells, 1);
tx_ring->acum_pkts = 0;
}
/* Prepare the packet's descriptors and send them to device */
rc = ena_com_prepare_tx(io_sq, &ena_tx_ctx, &nb_hw_desc);
if (unlikely(rc != 0)) {
if (likely(rc == ENA_COM_NO_MEM)) {
ena_trace(NULL, ENA_DBG | ENA_TXPTH,
"tx ring[%d] if out of space\n", tx_ring->que->id);
} else {
device_printf(adapter->pdev,
"failed to prepare tx bufs\n");
}
counter_u64_add(tx_ring->tx_stats.prepare_ctx_err, 1);
goto dma_error;
}
counter_enter();
counter_u64_add_protected(tx_ring->tx_stats.cnt, 1);
counter_u64_add_protected(tx_ring->tx_stats.bytes,
(*mbuf)->m_pkthdr.len);
counter_u64_add_protected(adapter->hw_stats.tx_packets, 1);
counter_u64_add_protected(adapter->hw_stats.tx_bytes,
(*mbuf)->m_pkthdr.len);
counter_exit();
tx_info->tx_descs = nb_hw_desc;
getbinuptime(&tx_info->timestamp);
tx_info->print_once = true;
tx_ring->next_to_use = ENA_TX_RING_IDX_NEXT(next_to_use,
tx_ring->ring_size);
/* stop the queue when no more space available, the packet can have up
* to sgl_size + 2. one for the meta descriptor and one for header
* (if the header is larger than tx_max_header_size).
*/
if (unlikely(!ena_com_sq_have_enough_space(tx_ring->ena_com_io_sq,
adapter->max_tx_sgl_size + 2))) {
ena_trace(NULL, ENA_DBG | ENA_TXPTH, "Stop queue %d\n",
tx_ring->que->id);
tx_ring->running = false;
counter_u64_add(tx_ring->tx_stats.queue_stop, 1);
/* There is a rare condition where this function decides to
* stop the queue but meanwhile tx_cleanup() updates
* next_to_completion and terminates.
* The queue will remain stopped forever.
* To solve this issue this function performs mb(), checks
* the wakeup condition and wakes up the queue if needed.
*/
mb();
if (ena_com_sq_have_enough_space(tx_ring->ena_com_io_sq,
ENA_TX_RESUME_THRESH)) {
tx_ring->running = true;
counter_u64_add(tx_ring->tx_stats.queue_wakeup, 1);
}
}
bus_dmamap_sync(adapter->tx_buf_tag, tx_info->dmamap,
BUS_DMASYNC_PREWRITE);
return (0);
dma_error:
tx_info->mbuf = NULL;
bus_dmamap_unload(adapter->tx_buf_tag, tx_info->dmamap);
return (rc);
}
static void
ena_start_xmit(struct ena_ring *tx_ring)
{
struct mbuf *mbuf;
struct ena_adapter *adapter = tx_ring->adapter;
struct ena_com_io_sq* io_sq;
int ena_qid;
int ret = 0;
if (unlikely((if_getdrvflags(adapter->ifp) & IFF_DRV_RUNNING) == 0))
return;
if (unlikely(!ENA_FLAG_ISSET(ENA_FLAG_LINK_UP, adapter)))
return;
ena_qid = ENA_IO_TXQ_IDX(tx_ring->que->id);
io_sq = &adapter->ena_dev->io_sq_queues[ena_qid];
while ((mbuf = drbr_peek(adapter->ifp, tx_ring->br)) != NULL) {
ena_trace(NULL, ENA_DBG | ENA_TXPTH, "\ndequeued mbuf %p with flags %#x and"
" header csum flags %#jx\n",
mbuf, mbuf->m_flags, (uint64_t)mbuf->m_pkthdr.csum_flags);
if (unlikely(!tx_ring->running)) {
drbr_putback(adapter->ifp, tx_ring->br, mbuf);
break;
}
if (unlikely((ret = ena_xmit_mbuf(tx_ring, &mbuf)) != 0)) {
if (ret == ENA_COM_NO_MEM) {
drbr_putback(adapter->ifp, tx_ring->br, mbuf);
} else if (ret == ENA_COM_NO_SPACE) {
drbr_putback(adapter->ifp, tx_ring->br, mbuf);
} else {
m_freem(mbuf);
drbr_advance(adapter->ifp, tx_ring->br);
}
break;
}
drbr_advance(adapter->ifp, tx_ring->br);
if (unlikely((if_getdrvflags(adapter->ifp) &
IFF_DRV_RUNNING) == 0))
return;
tx_ring->acum_pkts++;
BPF_MTAP(adapter->ifp, mbuf);
}
if (likely(tx_ring->acum_pkts != 0)) {
/* Trigger the dma engine */
ena_com_write_sq_doorbell(io_sq);
counter_u64_add(tx_ring->tx_stats.doorbells, 1);
tx_ring->acum_pkts = 0;
}
if (unlikely(!tx_ring->running))
taskqueue_enqueue(tx_ring->que->cleanup_tq,
&tx_ring->que->cleanup_task);
}