freebsd-skq/sys/pccard/meciareg.h
2001-05-15 23:53:18 +00:00

61 lines
1.9 KiB
C

/*
* meciareg.h
*
* PC9801 original PCMCIA controller code for NS/A,Ne,NX/C,NR/L.
* by Noriyuki Hosobuchi <hoso@ce.mbn.or.jp>
*
* $FreeBSD$
*/
/*--- I/O port definition */
#define MECIA_REG0 0x0a8e /* byte */
#define MECIA_REG1 0x1a8e /* byte */
#define MECIA_REG2 0x2a8e /* byte */
#define MECIA_REG3 0x3a8e /* byte : Interrupt */
#define MECIA_REG4 0x4a8e /* word : PC98 side I/O base */
#define MECIA_REG5 0x5a8e /* word : Card side I/O base */
#define MECIA_REG7 0x7a8e /* byte */
#define MECIA_REG_WINSEL 0x1e8e /* byte : win bank select register */
#define MECIA_REG_PAGOFS 0x0e8e /* word */
/* PC98_REG_WINSEL */
#define MECIA_MAPWIN 0x84 /* map Card on 0xda0000 - 0xdbffff */
#define MECIA_UNMAPWIN 0x00
/* MECIA_REG1 */
#define MECIA_CARDEXIST 0x08 /* 1:exist 0:not exist */
/* MECIA_REG2 */
#define MECIA_MAPIO 0x80 /* 1:I/O 0:Memory */
#define MECIA_IOTHROUGH 0x40 /* 0:I/O map 1:I/O addr-through */
#define MECIA_8BIT 0x20 /* bit width 1:8bit 0:16bit */
#define MECIA_MAP128 0x10 /* I/O map size 1:128byte 0:16byte */
#define MECIA_VCC3P3V 0x02 /* Vcc 1:3.3V 0:5.0V */
/* MECIA_REG3 */
#define MECIA_INT0 (0xf8 + 0x0) /* INT0(IRQ3) */
#define MECIA_INT1 (0xf8 + 0x1) /* INT1(IRQ5) */
#define MECIA_INT2 (0xf8 + 0x2) /* INT2(IRQ6) */
#define MECIA_INT4 (0xf8 + 0x4) /* INT4(IRQ10) */
#define MECIA_INT5 (0xf8 + 0x5) /* INT5(IRQ12) */
#define MECIA_INTDISABLE (0xf8 + 0x7) /* disable interrupt */
/* MECIA_REG7 */
#define MECIA_ATTRMEM 0x20 /* 1:attr mem 0:common mem */
#define MECIA_VPP12V 0x10 /* Vpp 0:5V 1:12V */
#ifdef KERNEL
extern int mecia_mode; /* in 'pccard/pcic.c' */
#define mecia_8bit_on() \
if (mecia_mode & MECIA_8BIT) \
outb(MECIA_REG2, inb(MECIA_REG2) | MECIA_8BIT)
#define mecia_8bit_off() \
if (mecia_mode & MECIA_8BIT) \
outb(MECIA_REG2, inb(MECIA_REG2) & ~MECIA_8BIT)
#define mecia_map128() (mecia_mode & MECIA_MAP128)
#endif
#define MECIA_INT_MASK_ALLOWED 0x3E68 /* PC98 */