Andrew Turner 405ada37fb Add support for the uart classes to set their default register shift value. ... This is needed with the pl011 driver. Before this change it would default to a shift of 0, however the hardware places the registers at 4-byte addresses meaning the value should be 2. This patch fixes this for the pl011 when configured using the fdt. The other drivers have a default value of 0 to keep this a no-op. MFC after: 1 week		2015-04-11 17:16:23 +00:00
..
apb.c	ACK interrupts on the new SoCs.	2015-01-05 02:00:41 +00:00
apbvar.h	The AR71xx has APB interrupts in the MISC registers from 0-7, later	2014-03-16 08:39:46 +00:00
ar71xx_bus_space_reversed.c
ar71xx_bus_space_reversed.h
ar71xx_chip.c	Add new features - an MDIO clock, WMAC reset, GMAC reset and ethernet	2013-10-15 01:35:48 +00:00
ar71xx_chip.h
ar71xx_cpudef.h	Add a GPIO output mux configuration method.	2015-01-03 06:55:58 +00:00
ar71xx_ehci.c	[QCA955x] make the USB EHCI interrupts shareable.	2015-03-02 02:08:43 +00:00
ar71xx_fixup.c
ar71xx_fixup.h
ar71xx_gpio.c	Add GPIO function mux configuration for AR934x SoCs.	2015-03-21 06:08:35 +00:00
ar71xx_gpiovar.h	Implement GPIO_GET_BUS() method for all GPIO drivers.	2015-01-31 19:32:14 +00:00
ar71xx_macaddr.c	Begin moving support for board MAC addresses over to being explicitly defined.	2015-03-28 23:40:29 +00:00
ar71xx_macaddr.h	Begin moving support for board MAC addresses over to being explicitly defined.	2015-03-28 23:40:29 +00:00
ar71xx_machdep.c	Begin moving support for board MAC addresses over to being explicitly defined.	2015-03-28 23:40:29 +00:00
ar71xx_ohci.c	Add 64-bit DMA support in the XHCI controller driver.	2015-01-05 20:22:18 +00:00
ar71xx_pci_bus_space.c
ar71xx_pci_bus_space.h
ar71xx_pci.c	Devices that rely on hints or identify routines for discovery need to	2013-10-29 14:07:31 +00:00
ar71xx_setup.c	Add initial Qualcomm Atheros QCA955x SoC support.	2015-01-05 02:06:26 +00:00
ar71xx_setup.h	add QCA955x SoC types.	2015-01-05 01:59:44 +00:00
ar71xx_spi.c	Devices that rely on hints or identify routines for discovery need to	2013-10-29 14:07:31 +00:00
ar71xx_wdog.c	Devices that rely on hints or identify routines for discovery need to	2013-10-29 14:07:31 +00:00
ar71xxreg.h	Add a MII mode for SGMII.	2015-03-02 01:23:59 +00:00
ar91xx_chip.c	Add new features - an MDIO clock, WMAC reset, GMAC reset and ethernet	2013-10-15 01:35:48 +00:00
ar91xx_chip.h
ar91xxreg.h
ar724x_chip.c	Add new features - an MDIO clock, WMAC reset, GMAC reset and ethernet	2013-10-15 01:35:48 +00:00
ar724x_chip.h
ar724x_pci.c	Fix the AR724x PCIe glue to correctly probe the BAR on AR7240 devices.	2014-09-28 07:27:58 +00:00
ar724xreg.h	Note that the AR724x PCIe registers are actually from the PCI_CTRL	2015-03-21 05:59:45 +00:00
ar933x_chip.c	Update the AR933x SoC support to include a few new knobs:	2013-10-15 03:23:08 +00:00
ar933x_chip.h
ar933x_uart.h
ar933xreg.h	Add register definitions for the AR933x SoC GMAC (ie, ethernet MAC)	2013-10-14 23:57:12 +00:00
ar934x_chip.c	Add a GPIO output mux configuration method.	2015-01-03 06:55:58 +00:00
ar934x_chip.h	Implement some initial AR934x support routines.	2013-07-21 03:56:57 +00:00
ar934x_nfcreg.h	Add the AR934x NAND flash controller register definitions.	2014-03-18 12:18:35 +00:00
ar934xreg.h	Add AR934x specific GPIO functions and output MUX configuration.	2015-01-03 06:35:53 +00:00
files.ar71xx	Start fleshing out some MAC address helper functions.	2015-03-15 21:56:12 +00:00
if_arge.c	Begin moving support for board MAC addresses over to being explicitly defined.	2015-03-28 23:40:29 +00:00
if_argevar.h	The linux driver code for the MDIO bus does a read-after-write	2015-02-02 17:33:00 +00:00
pcf2123_rtc.c
pcf2123reg.h
qca955x_chip.c	Add ethernet MAC DDR flush hookups for QCA955x.	2015-03-04 03:52:50 +00:00
qca955x_chip.h	Add initial Qualcomm Atheros QCA955x SoC support.	2015-01-05 02:06:26 +00:00
qca955xreg.h	add QCA955x PCIe configuration registers.	2015-03-21 06:00:46 +00:00
std.ar71xx
uart_bus_ar71xx.c	Use the UART frequency when programming the UART clock.	2013-07-21 03:54:39 +00:00
uart_bus_ar933x.c	Use the UART frequency when programming the UART clock.	2013-07-21 03:54:39 +00:00
uart_cpu_ar71xx.c	Use the UART frequency when programming the UART clock.	2013-07-21 03:54:39 +00:00
uart_cpu_ar933x.c	Use the UART frequency when programming the UART clock.	2013-07-21 03:54:39 +00:00
uart_dev_ar933x.c	Add support for the uart classes to set their default register shift value.	2015-04-11 17:16:23 +00:00
uart_dev_ar933x.h