freebsd-skq/sys/net/netmap.h
Luigi Rizzo 506cc70cce 1. Fix the handling of link reset while in netmap more.
A link reset now is completely transparent for the netmap client:
   even if the NIC resets its own ring (e.g. restarting from 0),
   the client will not see any change in the current rx/tx positions,
   because the driver will keep track of the offset between the two.

2. make the device-specific code more uniform across different drivers
   There were some inconsistencies in the implementation of the netmap
   support routines, now drivers have been aligned to a common
   code structure.

3. import netmap support for ixgbe . This is implemented as a very
   small patch for ixgbe.c (233 lines, 11 chunks, mostly comments:
   in total the patch has only 54 lines of new code) , as most of
   the code is in an external file sys/dev/netmap/ixgbe_netmap.h ,
   following some initial comments from Jack Vogel about making
   changes less intrusive.
   (Note, i have emailed Jack multiple times asking if he had
   comments on this structure of the code; i got no reply so
   i assume he is fine with it).

Support for other drivers (em, lem, re, igb) will come later.

"ixgbe" is now the reference driver for netmap support. Both the
external file (sys/dev/netmap/ixgbe_netmap.h) and the device-specific
patches (in sys/dev/ixgbe/ixgbe.c) are heavily commented and should
serve as a reference for other device drivers.

Tested on i386 and amd64 with the pkt-gen program in tools/tools/netmap,
the sender does 14.88 Mpps at 1050 Mhz and 14.2 Mpps at 900 MHz
on an i7-860 with 4 cores and 82599 card. Haven't tried yet more
aggressive optimizations such as adding 'prefetch' instructions
in the time-critical parts of the code.
2011-12-05 12:06:53 +00:00

275 lines
11 KiB
C

/*
* Copyright (C) 2011 Matteo Landi, Luigi Rizzo. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
*
* 3. Neither the name of the authors nor the names of their contributors
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY MATTEO LANDI AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL MATTEO LANDI OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* $FreeBSD$
* $Id: netmap.h 9753 2011-11-28 15:10:43Z luigi $
*
* This header contains the definitions of the constants and the
* structures needed by the ``netmap'' module, both kernel and
* userspace.
*/
#ifndef _NET_NETMAP_H_
#define _NET_NETMAP_H_
/*
* --- Netmap data structures ---
*
* The data structures used by netmap are shown below. Those in
* capital letters are in an mmapp()ed area shared with userspace,
* while others are private to the kernel.
* Shared structures do not contain pointers but only relative
* offsets, so that addressing is portable between kernel and userspace.
*
* The 'softc' of each interface is extended with a struct netmap_adapter
* containing information to support netmap operation. In addition to
* the fixed fields, it has two pointers to reach the arrays of
* 'struct netmap_kring' which in turn reaches the various
* struct netmap_ring, shared with userspace.
softc
+----------------+
| standard fields|
| if_pspare[0] ----------+
+----------------+ |
|
+----------------+<------+
|(netmap_adapter)|
| | netmap_kring
| tx_rings *--------------------------------->+-------------+
| | netmap_kring | ring *---------> ...
| rx_rings *---------->+--------------+ | nr_hwcur |
+----------------+ | ring *-------+ | nr_hwavail |
| nr_hwcur | | | selinfo |
| nr_hwavail | | +-------------+
| selinfo | | | ... |
+--------------+ | (na_num_rings+1 entries)
| .... | | | |
(na_num_rings+1 entries) +-------------+
| | |
+--------------+ |
| NETMAP_RING
+---->+-------------+
/ | cur |
NETMAP_IF (nifp, one per file desc.) / | avail |
+---------------+ / | buf_ofs |
| ni_num_queues | / +=============+
| | / | buf_idx | slot[0]
| | / | len, flags |
| | / +-------------+
+===============+ / | buf_idx | slot[1]
| txring_ofs[0] | (rel.to nifp)--' | len, flags |
| txring_ofs[1] | +-------------+
(num_rings+1 entries) (nr_num_slots entries)
| txring_ofs[n] | | buf_idx | slot[n-1]
+---------------+ | len, flags |
| rxring_ofs[0] | +-------------+
| rxring_ofs[1] |
(num_rings+1 entries)
| txring_ofs[n] |
+---------------+
* The NETMAP_RING is the shadow ring that mirrors the NIC rings.
* Each slot has the index of a buffer, its length and some flags.
* In user space, the buffer address is computed as
* (char *)ring + buf_ofs + index*MAX_BUF_SIZE
* In the kernel, buffers do not necessarily need to be contiguous,
* and the virtual and physical addresses are derived through
* a lookup table. When userspace wants to use a different buffer
* in a location, it must set the NS_BUF_CHANGED flag to make
* sure that the kernel recomputes updates the hardware ring and
* other fields (bus_dmamap, etc.) as needed.
*
* Normally the driver is not requested to report the result of
* transmissions (this can dramatically speed up operation).
* However the user may request to report completion by setting
* NS_REPORT.
*/
struct netmap_slot {
uint32_t buf_idx; /* buffer index */
uint16_t len; /* packet length, to be copied to/from the hw ring */
uint16_t flags; /* buf changed, etc. */
#define NS_BUF_CHANGED 0x0001 /* must resync the map, buffer changed */
#define NS_REPORT 0x0002 /* ask the hardware to report results
* e.g. by generating an interrupt
*/
};
/*
* Netmap representation of a TX or RX ring (also known as "queue").
* This is a queue implemented as a fixed-size circular array.
* At the software level, two fields are important: avail and cur.
*
* In TX rings:
* avail indicates the number of slots available for transmission.
* It is decremented by the application when it appends a
* packet, and set to nr_hwavail (see below) on a
* NIOCTXSYNC to reflect the actual state of the queue
* (keeping track of completed transmissions).
* cur indicates the empty slot to use for the next packet
* to send (i.e. the "tail" of the queue).
* It is incremented by the application.
*
* The kernel side of netmap uses two additional fields in its own
* private ring structure, netmap_kring:
* nr_hwcur is a copy of nr_cur on an NIOCTXSYNC.
* nr_hwavail is the number of slots known as available by the
* hardware. It is updated on an INTR (inc by the
* number of packets sent) and on a NIOCTXSYNC
* (decrease by nr_cur - nr_hwcur)
* A special case, nr_hwavail is -1 if the transmit
* side is idle (no pending transmits).
*
* In RX rings:
* avail is the number of packets available (possibly 0).
* It is decremented by the software when it consumes
* a packet, and set to nr_hwavail on a NIOCRXSYNC
* cur indicates the first slot that contains a packet
* (the "head" of the queue).
* It is incremented by the software when it consumes
* a packet.
*
* The kernel side of netmap uses two additional fields in the kring:
* nr_hwcur is a copy of nr_cur on an NIOCRXSYNC
* nr_hwavail is the number of packets available. It is updated
* on INTR (inc by the number of new packets arrived)
* and on NIOCRXSYNC (decreased by nr_cur - nr_hwcur).
*
* DATA OWNERSHIP/LOCKING:
* The netmap_ring is owned by the user program and it is only
* accessed or modified in the upper half of the kernel during
* a system call.
*
* The netmap_kring is only modified by the upper half of the kernel.
*/
struct netmap_ring {
/*
* nr_buf_base_ofs is meant to be used through macros.
* It contains the offset of the buffer region from this
* descriptor.
*/
const ssize_t buf_ofs;
const uint32_t num_slots; /* number of slots in the ring. */
uint32_t avail; /* number of usable slots */
uint32_t cur; /* 'current' r/w position */
const uint16_t nr_buf_size;
uint16_t flags;
#define NR_TIMESTAMP 0x0002 /* set timestamp on *sync() */
struct timeval ts; /* time of last *sync() */
/* the slots follow. This struct has variable size */
struct netmap_slot slot[0]; /* array of slots. */
};
/*
* Netmap representation of an interface and its queue(s).
* There is one netmap_if for each file descriptor on which we want
* to select/poll. We assume that on each interface has the same number
* of receive and transmit queues.
* select/poll operates on one or all pairs depending on the value of
* nmr_queueid passed on the ioctl.
*/
struct netmap_if {
char ni_name[IFNAMSIZ]; /* name of the interface. */
const u_int ni_version; /* API version, currently unused */
const u_int ni_num_queues; /* number of queue pairs (TX/RX). */
const u_int ni_rx_queues; /* if zero, use ni_num_queues */
/*
* the following array contains the offset of the
* each netmap ring from this structure. The first num_queues+1
* refer to the tx rings, the next n+1 refer to the rx rings.
* The area is filled up by the kernel on NIOCREG,
* and then only read by userspace code.
* entries 0..ni_num_queues-1 indicate the hardware queues,
* entry ni_num_queues is the queue from/to the stack.
*/
const ssize_t ring_ofs[0];
};
#ifndef IFCAP_NETMAP /* this should go in net/if.h */
#define IFCAP_NETMAP 0x100000
#endif
#ifndef NIOCREGIF
/*
* ioctl names and related fields
*
* NIOCGINFO takes a struct ifreq, the interface name is the input,
* the outputs are number of queues and number of descriptor
* for each queue (useful to set number of threads etc.).
*
* NIOCREGIF takes an interface name within a struct ifreq,
* and activates netmap mode on the interface (if possible).
*
* NIOCUNREGIF unregisters the interface associated to the fd.
*
* NIOCTXSYNC, NIOCRXSYNC synchronize tx or rx queues,
* whose identity is set in NIOCREGIF through nr_ringid
*/
/*
* struct nmreq overlays a struct ifreq
*/
struct nmreq {
char nr_name[IFNAMSIZ];
uint32_t nr_version; /* API version (unused) */
uint32_t nr_offset; /* nifp offset in the shared region */
uint32_t nr_memsize; /* size of the shared region */
uint32_t nr_numslots; /* descriptors per queue */
uint16_t nr_numrings;
uint16_t nr_ringid; /* ring(s) we care about */
#define NETMAP_HW_RING 0x4000 /* low bits indicate one hw ring */
#define NETMAP_SW_RING 0x2000 /* we process the sw ring */
#define NETMAP_NO_TX_POLL 0x1000 /* no gratuitous txsync on poll */
#define NETMAP_RING_MASK 0xfff /* the ring number */
};
/*
* default buf size is 2048, but it may make sense to have
* it shorter for better cache usage.
*/
#define NETMAP_BUF_SIZE (2048)
#define NIOCGINFO _IOWR('i', 145, struct nmreq) /* return IF info */
#define NIOCREGIF _IOWR('i', 146, struct nmreq) /* interface register */
#define NIOCUNREGIF _IO('i', 147) /* interface unregister */
#define NIOCTXSYNC _IO('i', 148) /* sync tx queues */
#define NIOCRXSYNC _IO('i', 149) /* sync rx queues */
#endif /* !NIOCREGIF */
#endif /* _NET_NETMAP_H_ */