freebsd-skq/sys/dev/aic7xxx/aicasm.c
gibbs d57cb059af Use TCL_CHANNEL/SCSI_ID/etc. macros in more locations.
Don't mess with the IRQMS bit in the host control register unless
we are an aic7770 chip.

Use calling context to determine if the card is already paused when
we update the target message request bit field in controller scratch
ram.  Looking at the paused bit in the HCNTRL register opened up a
race condition.

Insert delays in the target message request update routine as a temporary
work around for what looks like a chip bug.  I'm still investigating this
one.

Fix the Abort/Abort Tag/BDR handler to pull its message from the message
buffer in our softc instead of attempting to get it from a register on
the controller.  The message is never recorded by the controller in the
new message scheme.

Don't rely on having an SCB when a BDR occurs.  We can issue these during
invalid reconnects to.

Fix a few cases where we were restarting the sequencer but then still
falling out of a switch statement to unpause the sequencer again.
This could cause us to mess up sequencer state if it generated another
pausing interrupt between the time of the restart and unpause.

Kill the 'transceiver settle' loop during card initialization.  I
failed to realize that a controller that is not connected to any
cables will never settle or enable the SCSI transceivers at all.
The correct solution is to monitor the IOERR interrupt which indicates
that the transceiver state has changed (UW<->LVD).

Modify the aic7xxx assembler to properly echo input when stdin is not
a tty.
1999-03-23 07:24:29 +00:00

718 lines
16 KiB
C

/*
* Aic7xxx SCSI host adapter firmware asssembler
*
* Copyright (c) 1997, 1998 Justin T. Gibbs.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: aicasm.c,v 1.20 1998/09/15 07:24:17 gibbs Exp $
*/
#include <sys/types.h>
#include <sys/mman.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sysexits.h>
#include <unistd.h>
#include "aicasm.h"
#include "aicasm_symbol.h"
#include "sequencer.h"
typedef struct patch {
STAILQ_ENTRY(patch) links;
int patch_func;
u_int begin;
u_int skip_instr;
u_int skip_patch;
} patch_t;
STAILQ_HEAD(patch_list, patch) patches;
static void usage(void);
static void back_patch(void);
static void output_code(FILE *ofile);
static void output_listing(FILE *listfile, char *ifilename);
static int dump_scope(scope_t *scope);
static void emit_patch(scope_t *scope, int patch);
static int check_patch(patch_t **start_patch, int start_instr,
int *skip_addr, int *func_vals);
struct path_list search_path;
int includes_search_curdir;
char *appname;
FILE *ofile;
char *ofilename;
char *regfilename;
FILE *regfile;
char *listfilename;
FILE *listfile;
static STAILQ_HEAD(,instruction) seq_program;
struct scope_list scope_stack;
symlist_t patch_functions;
#if DEBUG
extern int yy_flex_debug;
extern int yydebug;
#endif
extern FILE *yyin;
extern int yyparse __P((void));
int
main(argc, argv)
int argc;
char *argv[];
{
extern char *optarg;
extern int optind;
int ch;
int retval;
char *inputfilename;
scope_t *sentinal;
STAILQ_INIT(&patches);
SLIST_INIT(&search_path);
STAILQ_INIT(&seq_program);
SLIST_INIT(&scope_stack);
/* Set Sentinal scope node */
sentinal = scope_alloc();
sentinal->type = SCOPE_ROOT;
includes_search_curdir = 1;
appname = *argv;
regfile = NULL;
listfile = NULL;
#if DEBUG
yy_flex_debug = 0;
yydebug = 0;
#endif
while ((ch = getopt(argc, argv, "d:l:n:o:r:I:O:")) != -1) {
switch(ch) {
case 'd':
#if DEBUG
if (strcmp(optarg, "s") == 0) {
yy_flex_debug = 1;
} else if (strcmp(optarg, "p") == 0) {
yydebug = 1;
} else {
fprintf(stderr, "%s: -d Requires either an "
"'s' or 'p' argument\n", appname);
usage();
}
#else
stop("-d: Assembler not built with debugging "
"information", EX_SOFTWARE);
#endif
break;
case 'l':
/* Create a program listing */
if ((listfile = fopen(optarg, "w")) == NULL) {
perror(optarg);
stop(NULL, EX_CANTCREAT);
}
listfilename = optarg;
break;
case 'n':
/* Don't complain about the -nostdinc directrive */
if (strcmp(optarg, "ostdinc")) {
fprintf(stderr, "%s: Unknown option -%c%s\n",
appname, ch, optarg);
usage();
/* NOTREACHED */
}
break;
case 'o':
if ((ofile = fopen(optarg, "w")) == NULL) {
perror(optarg);
stop(NULL, EX_CANTCREAT);
}
ofilename = optarg;
break;
case 'r':
if ((regfile = fopen(optarg, "w")) == NULL) {
perror(optarg);
stop(NULL, EX_CANTCREAT);
}
regfilename = optarg;
break;
case 'I':
{
path_entry_t include_dir;
if (strcmp(optarg, "-") == 0) {
if (includes_search_curdir == 0) {
fprintf(stderr, "%s: Warning - '-I-' "
"specified multiple "
"times\n", appname);
}
includes_search_curdir = 0;
for (include_dir = search_path.slh_first;
include_dir != NULL;
include_dir = include_dir->links.sle_next)
/*
* All entries before a '-I-' only
* apply to includes specified with
* quotes instead of "<>".
*/
include_dir->quoted_includes_only = 1;
} else {
include_dir =
(path_entry_t)malloc(sizeof(*include_dir));
if (include_dir == NULL) {
perror(optarg);
stop(NULL, EX_OSERR);
}
include_dir->directory = strdup(optarg);
if (include_dir->directory == NULL) {
perror(optarg);
stop(NULL, EX_OSERR);
}
include_dir->quoted_includes_only = 0;
SLIST_INSERT_HEAD(&search_path, include_dir,
links);
}
break;
}
case '?':
default:
usage();
/* NOTREACHED */
}
}
argc -= optind;
argv += optind;
if (argc != 1) {
fprintf(stderr, "%s: No input file specifiled\n", appname);
usage();
/* NOTREACHED */
}
symtable_open();
inputfilename = *argv;
include_file(*argv, SOURCE_FILE);
retval = yyparse();
if (retval == 0) {
if (SLIST_FIRST(&scope_stack) == NULL
|| SLIST_FIRST(&scope_stack)->type != SCOPE_ROOT) {
stop("Unterminated conditional expression",
EX_DATAERR);
/* NOTREACHED */
}
/* Process outmost scope */
process_scope(SLIST_FIRST(&scope_stack));
/*
* Decend the tree of scopes and insert/emit
* patches as appropriate. We perform a depth first
* tranversal, recursively handling each scope.
*/
/* start at the root scope */
dump_scope(SLIST_FIRST(&scope_stack));
/* Patch up forward jump addresses */
back_patch();
if (ofile != NULL)
output_code(ofile);
if (regfile != NULL) {
symtable_dump(regfile);
}
if (listfile != NULL)
output_listing(listfile, inputfilename);
}
stop(NULL, 0);
/* NOTREACHED */
return (0);
}
static void
usage()
{
(void)fprintf(stderr,
"usage: %-16s [-nostdinc] [-I-] [-I directory] [-o output_file]
[-r register_output_file] [-l program_list_file]
input_file\n",
appname);
exit(EX_USAGE);
}
static void
back_patch()
{
struct instruction *cur_instr;
for(cur_instr = seq_program.stqh_first;
cur_instr != NULL;
cur_instr = cur_instr->links.stqe_next) {
if (cur_instr->patch_label != NULL) {
struct ins_format3 *f3_instr;
u_int address;
if (cur_instr->patch_label->type != LABEL) {
char buf[255];
snprintf(buf, sizeof(buf),
"Undefined label %s",
cur_instr->patch_label->name);
stop(buf, EX_DATAERR);
/* NOTREACHED */
}
f3_instr = &cur_instr->format.format3;
address = f3_instr->address;
address += cur_instr->patch_label->info.linfo->address;
f3_instr->address = address;
}
}
}
static void
output_code(ofile)
FILE *ofile;
{
struct instruction *cur_instr;
patch_t *cur_patch;
symbol_node_t *cur_node;
int instrcount;
instrcount = 0;
fprintf(ofile,
"/*
* DO NOT EDIT - This file is automatically generated.
*/\n");
fprintf(ofile, "static u_int8_t seqprog[] = {\n");
for(cur_instr = seq_program.stqh_first;
cur_instr != NULL;
cur_instr = cur_instr->links.stqe_next) {
fprintf(ofile, "\t0x%02x, 0x%02x, 0x%02x, 0x%02x,\n",
cur_instr->format.bytes[0],
cur_instr->format.bytes[1],
cur_instr->format.bytes[2],
cur_instr->format.bytes[3]);
instrcount++;
}
fprintf(ofile, "};\n\n");
/*
* Output patch information. Patch functions first.
*/
for(cur_node = SLIST_FIRST(&patch_functions);
cur_node != NULL;
cur_node = SLIST_NEXT(cur_node,links)) {
fprintf(ofile,
"static int ahc_patch%d_func(struct ahc_softc *ahc);
static int
ahc_patch%d_func(struct ahc_softc *ahc)
{
return (%s);
}\n\n",
cur_node->symbol->info.condinfo->func_num,
cur_node->symbol->info.condinfo->func_num,
cur_node->symbol->name);
}
fprintf(ofile,
"typedef int patch_func_t __P((struct ahc_softc *));
struct patch {
patch_func_t *patch_func;
u_int32_t begin :10,
skip_instr :10,
skip_patch :12;
} patches[] = {\n");
for(cur_patch = STAILQ_FIRST(&patches);
cur_patch != NULL;
cur_patch = STAILQ_NEXT(cur_patch,links)) {
fprintf(ofile, "\t{ ahc_patch%d_func, %d, %d, %d },\n",
cur_patch->patch_func, cur_patch->begin,
cur_patch->skip_instr, cur_patch->skip_patch);
}
fprintf(ofile, "\n};\n");
fprintf(stderr, "%s: %d instructions used\n", appname, instrcount);
}
static int
dump_scope(scope_t *scope)
{
scope_t *cur_scope;
int patches_emitted = 0;
/*
* Emit the first patch for this scope
*/
emit_patch(scope, 0);
/*
* Dump each scope within this one.
*/
cur_scope = TAILQ_FIRST(&scope->inner_scope);
while (cur_scope != NULL) {
dump_scope(cur_scope);
cur_scope = TAILQ_NEXT(cur_scope, scope_links);
}
/*
* Emit the second, closing, patch for this scope
*/
emit_patch(scope, 1);
}
void
emit_patch(scope_t *scope, int patch)
{
patch_info_t *pinfo;
patch_t *new_patch;
pinfo = &scope->patches[patch];
if (pinfo->skip_instr == 0)
/* No-Op patch */
return;
new_patch = (patch_t *)malloc(sizeof(*new_patch));
if (new_patch == NULL)
stop("Could not malloc patch structure", EX_OSERR);
memset(new_patch, 0, sizeof(*new_patch));
if (patch == 0) {
new_patch->patch_func = scope->func_num;
new_patch->begin = scope->begin_addr;
} else {
new_patch->patch_func = 0;
new_patch->begin = scope->end_addr;
}
new_patch->skip_instr = pinfo->skip_instr;
new_patch->skip_patch = pinfo->skip_patch;
STAILQ_INSERT_TAIL(&patches, new_patch, links);
}
void
output_listing(FILE *listfile, char *ifilename)
{
char buf[1024];
FILE *ifile;
struct instruction *cur_instr;
patch_t *cur_patch;
symbol_node_t *cur_func;
int *func_values;
int instrcount;
int instrptr;
int line;
int func_count;
int skip_addr;
instrcount = 0;
instrptr = 0;
line = 1;
skip_addr = 0;
if ((ifile = fopen(ifilename, "r")) == NULL) {
perror(ifilename);
stop(NULL, EX_DATAERR);
}
/*
* Determine which options to apply to this listing.
*/
for (func_count = 0, cur_func = SLIST_FIRST(&patch_functions);
cur_func != NULL;
cur_func = SLIST_NEXT(cur_func, links))
func_count++;
if (func_count != 0) {
func_values = (int *)malloc(func_count * sizeof(int));
if (func_values == NULL)
stop("Could not malloc", EX_OSERR);
func_values[0] = 0; /* FALSE func */
func_count--;
/*
* Ask the user to fill in the return values for
* the rest of the functions.
*/
for (cur_func = SLIST_FIRST(&patch_functions);
cur_func != NULL && SLIST_NEXT(cur_func, links) != NULL;
cur_func = SLIST_NEXT(cur_func, links), func_count--) {
int input;
fprintf(stdout, "\n(%s)\n", cur_func->symbol->name);
fprintf(stdout,
"Enter the return value for "
"this expression[T/F]:");
while (1) {
input = getchar();
input = toupper(input);
if (input == 'T') {
func_values[func_count] = 1;
break;
} else if (input == 'F') {
func_values[func_count] = 0;
break;
}
}
if (isatty(fileno(stdin)) == 0)
putchar(input);
}
fprintf(stdout, "\nThanks!\n");
}
/* Now output the listing */
cur_patch = STAILQ_FIRST(&patches);
for(cur_instr = STAILQ_FIRST(&seq_program);
cur_instr != NULL;
cur_instr = STAILQ_NEXT(cur_instr, links), instrcount++) {
if (check_patch(&cur_patch, instrcount,
&skip_addr, func_values) == 0) {
/* Don't count this instruction as it is in a patch
* that was removed.
*/
continue;
}
while (line < cur_instr->srcline) {
fgets(buf, sizeof(buf), ifile);
fprintf(listfile, "\t\t%s", buf);
line++;
}
fprintf(listfile, "%03x %02x%02x%02x%02x", instrptr,
cur_instr->format.bytes[0],
cur_instr->format.bytes[1],
cur_instr->format.bytes[2],
cur_instr->format.bytes[3]);
fgets(buf, sizeof(buf), ifile);
fprintf(listfile, "\t%s", buf);
line++;
instrptr++;
}
/* Dump the remainder of the file */
while(fgets(buf, sizeof(buf), ifile) != NULL)
fprintf(listfile, "\t\t%s", buf);
fclose(ifile);
}
static int
check_patch(patch_t **start_patch, int start_instr,
int *skip_addr, int *func_vals)
{
patch_t *cur_patch;
cur_patch = *start_patch;
while (cur_patch != NULL && start_instr == cur_patch->begin) {
if (func_vals[cur_patch->patch_func] == 0) {
int skip;
/* Start rejecting code */
*skip_addr = start_instr + cur_patch->skip_instr;
for (skip = cur_patch->skip_patch;
skip > 0 && cur_patch != NULL;
skip--)
cur_patch = STAILQ_NEXT(cur_patch, links);
} else {
/* Accepted this patch. Advance to the next
* one and wait for our intruction pointer to
* hit this point.
*/
cur_patch = STAILQ_NEXT(cur_patch, links);
}
}
*start_patch = cur_patch;
if (start_instr < *skip_addr)
/* Still skipping */
return (0);
return (1);
}
/*
* Print out error information if appropriate, and clean up before
* terminating the program.
*/
void
stop(string, err_code)
const char *string;
int err_code;
{
if (string != NULL) {
fprintf(stderr, "%s: ", appname);
if (yyfilename != NULL) {
fprintf(stderr, "Stopped at file %s, line %d - ",
yyfilename, yylineno);
}
fprintf(stderr, "%s\n", string);
}
if (ofile != NULL) {
fclose(ofile);
if (err_code != 0) {
fprintf(stderr, "%s: Removing %s due to error\n",
appname, ofilename);
unlink(ofilename);
}
}
if (regfile != NULL) {
fclose(regfile);
if (err_code != 0) {
fprintf(stderr, "%s: Removing %s due to error\n",
appname, regfilename);
unlink(regfilename);
}
}
if (listfile != NULL) {
fclose(listfile);
if (err_code != 0) {
fprintf(stderr, "%s: Removing %s due to error\n",
appname, listfilename);
unlink(listfilename);
}
}
symlist_free(&patch_functions);
symtable_close();
exit(err_code);
}
struct instruction *
seq_alloc()
{
struct instruction *new_instr;
new_instr = (struct instruction *)malloc(sizeof(struct instruction));
if (new_instr == NULL)
stop("Unable to malloc instruction object", EX_SOFTWARE);
memset(new_instr, 0, sizeof(*new_instr));
STAILQ_INSERT_TAIL(&seq_program, new_instr, links);
new_instr->srcline = yylineno;
return new_instr;
}
scope_t *
scope_alloc()
{
scope_t *new_scope;
new_scope = (scope_t *)malloc(sizeof(scope_t));
if (new_scope == NULL)
stop("Unable to malloc scope object", EX_SOFTWARE);
memset(new_scope, 0, sizeof(*new_scope));
TAILQ_INIT(&new_scope->inner_scope);
if (SLIST_FIRST(&scope_stack) != NULL) {
TAILQ_INSERT_TAIL(&SLIST_FIRST(&scope_stack)->inner_scope,
new_scope, scope_links);
}
/* This patch is now the current scope */
SLIST_INSERT_HEAD(&scope_stack, new_scope, scope_stack_links);
return new_scope;
}
void
process_scope(scope_t *scope)
{
/*
* We are "leaving" this scope. We should now have
* enough information to process the lists of scopes
* we encapsulate.
*/
scope_t *cur_scope;
u_int skip_patch_count;
u_int skip_instr_count;
cur_scope = TAILQ_LAST(&scope->inner_scope, scope_tailq);
skip_patch_count = 0;
skip_instr_count = 0;
while (cur_scope != NULL) {
u_int patch0_patch_skip;
patch0_patch_skip = 0;
switch (cur_scope->type) {
case SCOPE_IF:
case SCOPE_ELSE_IF:
if (skip_instr_count != 0) {
/* Create a tail patch */
patch0_patch_skip++;
cur_scope->patches[1].skip_patch =
skip_patch_count + 1;
cur_scope->patches[1].skip_instr =
skip_instr_count;
}
/* Count Head patch */
patch0_patch_skip++;
/* Count any patches contained in our inner scope */
patch0_patch_skip += cur_scope->inner_scope_patches;
cur_scope->patches[0].skip_patch = patch0_patch_skip;
cur_scope->patches[0].skip_instr =
cur_scope->end_addr - cur_scope->begin_addr;
skip_instr_count += cur_scope->patches[0].skip_instr;
skip_patch_count += patch0_patch_skip;
if (cur_scope->type == SCOPE_IF) {
scope->inner_scope_patches += skip_patch_count;
skip_patch_count = 0;
skip_instr_count = 0;
}
break;
case SCOPE_ELSE:
/* Count any patches contained in our innter scope */
skip_patch_count += cur_scope->inner_scope_patches;
skip_instr_count += cur_scope->end_addr
- cur_scope->begin_addr;
break;
}
cur_scope = TAILQ_PREV(cur_scope, scope_tailq, scope_links);
}
}