842f4520d0
Major changes are: SAE, Suite B, RFC 7268, EAP-PKE, ACS, and tons of bug fixes. Relnotes: yes
400 lines
16 KiB
Plaintext
400 lines
16 KiB
Plaintext
wpa_supplicant and Wi-Fi Protected Setup (WPS)
|
|
==============================================
|
|
|
|
This document describes how the WPS implementation in wpa_supplicant
|
|
can be configured and how an external component on the client (e.g.,
|
|
management GUI) is used to enable WPS enrollment and registrar
|
|
registration.
|
|
|
|
|
|
Introduction to WPS
|
|
-------------------
|
|
|
|
Wi-Fi Protected Setup (WPS) is a mechanism for easy configuration of a
|
|
wireless network. It allows automated generation of random keys (WPA
|
|
passphrase/PSK) and configuration of an access point and client
|
|
devices. WPS includes number of methods for setting up connections
|
|
with PIN method and push-button configuration (PBC) being the most
|
|
commonly deployed options.
|
|
|
|
While WPS can enable more home networks to use encryption in the
|
|
wireless network, it should be noted that the use of the PIN and
|
|
especially PBC mechanisms for authenticating the initial key setup is
|
|
not very secure. As such, use of WPS may not be suitable for
|
|
environments that require secure network access without chance for
|
|
allowing outsiders to gain access during the setup phase.
|
|
|
|
WPS uses following terms to describe the entities participating in the
|
|
network setup:
|
|
- access point: the WLAN access point
|
|
- Registrar: a device that control a network and can authorize
|
|
addition of new devices); this may be either in the AP ("internal
|
|
Registrar") or in an external device, e.g., a laptop, ("external
|
|
Registrar")
|
|
- Enrollee: a device that is being authorized to use the network
|
|
|
|
It should also be noted that the AP and a client device may change
|
|
roles (i.e., AP acts as an Enrollee and client device as a Registrar)
|
|
when WPS is used to configure the access point.
|
|
|
|
|
|
More information about WPS is available from Wi-Fi Alliance:
|
|
http://www.wi-fi.org/wifi-protected-setup
|
|
|
|
|
|
wpa_supplicant implementation
|
|
-----------------------------
|
|
|
|
wpa_supplicant includes an optional WPS component that can be used as
|
|
an Enrollee to enroll new network credential or as a Registrar to
|
|
configure an AP.
|
|
|
|
|
|
wpa_supplicant configuration
|
|
----------------------------
|
|
|
|
WPS is an optional component that needs to be enabled in
|
|
wpa_supplicant build configuration (.config). Here is an example
|
|
configuration that includes WPS support and Linux nl80211 -based
|
|
driver interface:
|
|
|
|
CONFIG_DRIVER_NL80211=y
|
|
CONFIG_WPS=y
|
|
|
|
If you want to enable WPS external registrar (ER) functionality, you
|
|
will also need to add following line:
|
|
|
|
CONFIG_WPS_ER=y
|
|
|
|
Following parameter can be used to enable support for NFC config method:
|
|
|
|
CONFIG_WPS_NFC=y
|
|
|
|
|
|
WPS needs the Universally Unique IDentifier (UUID; see RFC 4122) for
|
|
the device. This is configured in the runtime configuration for
|
|
wpa_supplicant (if not set, UUID will be generated based on local MAC
|
|
address):
|
|
|
|
# example UUID for WPS
|
|
uuid=12345678-9abc-def0-1234-56789abcdef0
|
|
|
|
The network configuration blocks needed for WPS are added
|
|
automatically based on control interface commands, so they do not need
|
|
to be added explicitly in the configuration file.
|
|
|
|
WPS registration will generate new network blocks for the acquired
|
|
credentials. If these are to be stored for future use (after
|
|
restarting wpa_supplicant), wpa_supplicant will need to be configured
|
|
to allow configuration file updates:
|
|
|
|
update_config=1
|
|
|
|
|
|
|
|
External operations
|
|
-------------------
|
|
|
|
WPS requires either a device PIN code (usually, 8-digit number) or a
|
|
pushbutton event (for PBC) to allow a new WPS Enrollee to join the
|
|
network. wpa_supplicant uses the control interface as an input channel
|
|
for these events.
|
|
|
|
The PIN value used in the commands must be processed by an UI to
|
|
remove non-digit characters and potentially, to verify the checksum
|
|
digit. "wpa_cli wps_check_pin <PIN>" can be used to do such processing.
|
|
It returns FAIL if the PIN is invalid, or FAIL-CHECKSUM if the checksum
|
|
digit is incorrect, or the processed PIN (non-digit characters removed)
|
|
if the PIN is valid.
|
|
|
|
If the client device has a display, a random PIN has to be generated
|
|
for each WPS registration session. wpa_supplicant can do this with a
|
|
control interface request, e.g., by calling wpa_cli:
|
|
|
|
wpa_cli wps_pin any
|
|
|
|
This will return the generated 8-digit PIN which will then need to be
|
|
entered at the Registrar to complete WPS registration. At that point,
|
|
the client will be enrolled with credentials needed to connect to the
|
|
AP to access the network.
|
|
|
|
|
|
If the client device does not have a display that could show the
|
|
random PIN, a hardcoded PIN that is printed on a label can be
|
|
used. wpa_supplicant is notified this with a control interface
|
|
request, e.g., by calling wpa_cli:
|
|
|
|
wpa_cli wps_pin any 12345670
|
|
|
|
This starts the WPS negotiation in the same way as above with the
|
|
generated PIN.
|
|
|
|
When the wps_pin command is issued for an AP (including P2P GO) mode
|
|
interface, an optional timeout parameter can be used to specify
|
|
expiration timeout for the PIN in seconds. For example:
|
|
|
|
wpa_cli wps_pin any 12345670 300
|
|
|
|
|
|
If a random PIN is needed for a user interface, "wpa_cli wps_pin get"
|
|
can be used to generate a new PIN without starting WPS negotiation.
|
|
This random PIN can then be passed as an argument to another wps_pin
|
|
call when the actual operation should be started.
|
|
|
|
If the client design wants to support optional WPS PBC mode, this can
|
|
be enabled by either a physical button in the client device or a
|
|
virtual button in the user interface. The PBC operation requires that
|
|
a button is also pressed at the AP/Registrar at about the same time (2
|
|
minute window). wpa_supplicant is notified of the local button event
|
|
over the control interface, e.g., by calling wpa_cli:
|
|
|
|
wpa_cli wps_pbc
|
|
|
|
At this point, the AP/Registrar has two minutes to complete WPS
|
|
negotiation which will generate a new WPA PSK in the same way as the
|
|
PIN method described above.
|
|
|
|
|
|
If the client wants to operate in the Registrar role to learn the
|
|
current AP configuration and optionally, to configure an AP,
|
|
wpa_supplicant is notified over the control interface, e.g., with
|
|
wpa_cli:
|
|
|
|
wpa_cli wps_reg <AP BSSID> <AP PIN>
|
|
(example: wpa_cli wps_reg 02:34:56:78:9a:bc 12345670)
|
|
|
|
This is used to fetch the current AP settings instead of actually
|
|
changing them. The main difference with the wps_pin command is that
|
|
wps_reg uses the AP PIN (e.g., from a label on the AP) instead of a
|
|
PIN generated at the client.
|
|
|
|
In order to change the AP configuration, the new configuration
|
|
parameters are given to the wps_reg command:
|
|
|
|
wpa_cli wps_reg <AP BSSID> <AP PIN> <new SSID> <auth> <encr> <new key>
|
|
examples:
|
|
wpa_cli wps_reg 02:34:56:78:9a:bc 12345670 testing WPA2PSK CCMP 12345678
|
|
wpa_cli wps_reg 02:34:56:78:9a:bc 12345670 clear OPEN NONE ""
|
|
|
|
<auth> must be one of the following: OPEN WPAPSK WPA2PSK
|
|
<encr> must be one of the following: NONE WEP TKIP CCMP
|
|
|
|
|
|
Scanning
|
|
--------
|
|
|
|
Scan results ('wpa_cli scan_results' or 'wpa_cli bss <idx>') include a
|
|
flags field that is used to indicate whether the BSS support WPS. If
|
|
the AP support WPS, but has not recently activated a Registrar, [WPS]
|
|
flag will be included. If PIN method has been recently selected,
|
|
[WPS-PIN] is shown instead. Similarly, [WPS-PBC] is shown if PBC mode
|
|
is in progress. GUI programs can use these as triggers for suggesting
|
|
a guided WPS configuration to the user. In addition, control interface
|
|
monitor events WPS-AP-AVAILABLE{,-PBC,-PIN} can be used to find out if
|
|
there are WPS enabled APs in scan results without having to go through
|
|
all the details in the GUI. These notification could be used, e.g., to
|
|
suggest possible WPS connection to the user.
|
|
|
|
|
|
wpa_gui
|
|
-------
|
|
|
|
wpa_gui-qt4 directory contains a sample GUI that shows an example of
|
|
how WPS support can be integrated into the GUI. Its main window has a
|
|
WPS tab that guides user through WPS registration with automatic AP
|
|
selection. In addition, it shows how WPS can be started manually by
|
|
selecting an AP from scan results.
|
|
|
|
|
|
Credential processing
|
|
---------------------
|
|
|
|
By default, wpa_supplicant processes received credentials and updates
|
|
its configuration internally. However, it is possible to
|
|
control these operations from external programs, if desired.
|
|
|
|
This internal processing can be disabled with wps_cred_processing=1
|
|
option. When this is used, an external program is responsible for
|
|
processing the credential attributes and updating wpa_supplicant
|
|
configuration based on them.
|
|
|
|
Following control interface messages are sent out for external programs:
|
|
|
|
WPS-CRED-RECEIVED <hexdump of Credential attribute(s)>
|
|
For example:
|
|
<2>WPS-CRED-RECEIVED 100e006f10260001011045000c6a6b6d2d7770732d74657374100300020020100f000200081027004030653462303435366332363666653064333961643135353461316634626637313234333761636664623766333939653534663166316230323061643434386235102000060266a0ee1727
|
|
|
|
|
|
wpa_supplicant as WPS External Registrar (ER)
|
|
---------------------------------------------
|
|
|
|
wpa_supplicant can be used as a WPS ER to configure an AP or enroll
|
|
new Enrollee to join the network. This functionality uses UPnP and
|
|
requires that a working IP connectivity is available with the AP (this
|
|
can be either over a wired or wireless connection).
|
|
|
|
Separate wpa_supplicant process can be started for WPS ER
|
|
operations. A special "none" driver can be used in such a case to
|
|
indicate that no local network interface is actually controlled. For
|
|
example, following command could be used to start the ER:
|
|
|
|
wpa_supplicant -Dnone -c er.conf -ieth0
|
|
|
|
Sample er.conf:
|
|
|
|
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=admin
|
|
device_name=WPS External Registrar
|
|
|
|
|
|
wpa_cli commands for ER functionality:
|
|
|
|
wps_er_start [IP address]
|
|
- start WPS ER functionality
|
|
- the optional IP address parameter can be used to filter operations only
|
|
to include a single AP
|
|
- if run again while ER is active, the stored information (discovered APs
|
|
and Enrollees) are shown again
|
|
|
|
wps_er_stop
|
|
- stop WPS ER functionality
|
|
|
|
wps_er_learn <UUID|BSSID> <AP PIN>
|
|
- learn AP configuration
|
|
|
|
wps_er_set_config <UUID|BSSID> <network id>
|
|
- use AP configuration from a locally configured network (e.g., from
|
|
wps_reg command); this does not change the AP's configuration, but
|
|
only prepares a configuration to be used when enrolling a new device
|
|
to the AP
|
|
|
|
wps_er_config <UUID|BSSID> <AP PIN> <new SSID> <auth> <encr> <new key>
|
|
- examples:
|
|
wps_er_config 87654321-9abc-def0-1234-56789abc0002 12345670 testing WPA2PSK CCMP 12345678
|
|
wpa_er_config 87654321-9abc-def0-1234-56789abc0002 12345670 clear OPEN NONE ""
|
|
|
|
<auth> must be one of the following: OPEN WPAPSK WPA2PSK
|
|
<encr> must be one of the following: NONE WEP TKIP CCMP
|
|
|
|
|
|
wps_er_pbc <Enrollee UUID|MAC address>
|
|
- accept an Enrollee PBC using External Registrar
|
|
|
|
wps_er_pin <Enrollee UUID|"any"|MAC address> <PIN> [Enrollee MAC address]
|
|
- add an Enrollee PIN to External Registrar
|
|
- if Enrollee UUID is not known, "any" can be used to add a wildcard PIN
|
|
- if the MAC address of the enrollee is known, it should be configured
|
|
to allow the AP to advertise list of authorized enrollees
|
|
|
|
|
|
WPS ER events:
|
|
|
|
WPS_EVENT_ER_AP_ADD
|
|
- WPS ER discovered an AP
|
|
|
|
WPS-ER-AP-ADD 87654321-9abc-def0-1234-56789abc0002 02:11:22:33:44:55 pri_dev_type=6-0050F204-1 wps_state=1 |Very friendly name|Company|Long description of the model|WAP|http://w1.fi/|http://w1.fi/hostapd/
|
|
|
|
WPS_EVENT_ER_AP_REMOVE
|
|
- WPS ER removed an AP entry
|
|
|
|
WPS-ER-AP-REMOVE 87654321-9abc-def0-1234-56789abc0002
|
|
|
|
WPS_EVENT_ER_ENROLLEE_ADD
|
|
- WPS ER discovered a new Enrollee
|
|
|
|
WPS-ER-ENROLLEE-ADD 2b7093f1-d6fb-5108-adbb-bea66bb87333 02:66:a0:ee:17:27 M1=1 config_methods=0x14d dev_passwd_id=0 pri_dev_type=1-0050F204-1 |Wireless Client|Company|cmodel|123|12345|
|
|
|
|
WPS_EVENT_ER_ENROLLEE_REMOVE
|
|
- WPS ER removed an Enrollee entry
|
|
|
|
WPS-ER-ENROLLEE-REMOVE 2b7093f1-d6fb-5108-adbb-bea66bb87333 02:66:a0:ee:17:27
|
|
|
|
WPS-ER-AP-SETTINGS
|
|
- WPS ER learned AP settings
|
|
|
|
WPS-ER-AP-SETTINGS uuid=fd91b4ec-e3fa-5891-a57d-8c59efeed1d2 ssid=test-wps auth_type=0x0020 encr_type=0x0008 key=12345678
|
|
|
|
|
|
WPS with NFC
|
|
------------
|
|
|
|
WPS can be used with NFC-based configuration method. An NFC tag
|
|
containing a password token from the Enrollee can be used to
|
|
authenticate the connection instead of the PIN. In addition, an NFC tag
|
|
with a configuration token can be used to transfer AP settings without
|
|
going through the WPS protocol.
|
|
|
|
When the station acts as an Enrollee, a local NFC tag with a password
|
|
token can be used by touching the NFC interface of a Registrar.
|
|
|
|
"wps_nfc [BSSID]" command starts WPS protocol run with the local end as
|
|
the Enrollee using the NFC password token that is either pre-configured
|
|
in the configuration file (wps_nfc_dev_pw_id, wps_nfc_dh_pubkey,
|
|
wps_nfc_dh_privkey, wps_nfc_dev_pw) or generated dynamically with
|
|
"wps_nfc_token <WPS|NDEF>" command. The included nfc_pw_token tool
|
|
(build with "make nfc_pw_token") can be used to generate NFC password
|
|
tokens during manufacturing (each station needs to have its own random
|
|
keys).
|
|
|
|
The "wps_nfc_config_token <WPS/NDEF>" command can be used to build an
|
|
NFC configuration token when wpa_supplicant is controlling an AP
|
|
interface (AP or P2P GO). The output value from this command is a
|
|
hexdump of the current AP configuration (WPS parameter requests this to
|
|
include only the WPS attributes; NDEF parameter requests additional NDEF
|
|
encapsulation to be included). This data needs to be written to an NFC
|
|
tag with an external program. Once written, the NFC configuration token
|
|
can be used to touch an NFC interface on a station to provision the
|
|
credentials needed to access the network.
|
|
|
|
The "wps_nfc_config_token <WPS/NDEF> <network id>" command can be used
|
|
to build an NFC configuration token based on a locally configured
|
|
network.
|
|
|
|
If the station includes NFC interface and reads an NFC tag with a MIME
|
|
media type "application/vnd.wfa.wsc", the NDEF message payload (with or
|
|
without NDEF encapsulation) can be delivered to wpa_supplicant using the
|
|
following wpa_cli command:
|
|
|
|
wps_nfc_tag_read <hexdump of payload>
|
|
|
|
If the NFC tag contains a configuration token, the network is added to
|
|
wpa_supplicant configuration. If the NFC tag contains a password token,
|
|
the token is added to the WPS Registrar component. This information can
|
|
then be used with wps_reg command (when the NFC password token was from
|
|
an AP) using a special value "nfc-pw" in place of the PIN parameter. If
|
|
the ER functionality has been started (wps_er_start), the NFC password
|
|
token is used to enable enrollment of a new station (that was the source
|
|
of the NFC password token).
|
|
|
|
"nfc_get_handover_req <NDEF> <WPS-CR>" command can be used to build the
|
|
WPS carrier record for a Handover Request Message for connection
|
|
handover. The first argument selects the format of the output data and
|
|
the second argument selects which type of connection handover is
|
|
requested (WPS-CR = Wi-Fi handover as specified in WSC 2.0).
|
|
|
|
"nfc_get_handover_sel <NDEF> <WPS> [UUID|BSSID]" command can be used to
|
|
build the contents of a Handover Select Message for connection handover
|
|
when this does not depend on the contents of the Handover Request
|
|
Message. The first argument selects the format of the output data and
|
|
the second argument selects which type of connection handover is
|
|
requested (WPS = Wi-Fi handover as specified in WSC 2.0). If the options
|
|
UUID|BSSID argument is included, this is a request to build the handover
|
|
message for the specified AP when wpa_supplicant is operating as a WPS
|
|
ER.
|
|
|
|
"nfc_report_handover <INIT/RESP> WPS <carrier from handover request>
|
|
<carrier from handover select>" can be used as an alternative way for
|
|
reporting completed NFC connection handover. The first parameter
|
|
indicates whether the local device initiated or responded to the
|
|
connection handover and the carrier records are the selected carrier
|
|
from the handover request and select messages as a hexdump.
|
|
|
|
The "wps_er_nfc_config_token <WPS/NDEF> <UUID|BSSID>" command can be
|
|
used to build an NFC configuration token for the specified AP when
|
|
wpa_supplicant is operating as a WPS ER. The output value from this
|
|
command is a hexdump of the selected AP configuration (WPS parameter
|
|
requests this to include only the WPS attributes; NDEF parameter
|
|
requests additional NDEF encapsulation to be included). This data needs
|
|
to be written to an NFC tag with an external program. Once written, the
|
|
NFC configuration token can be used to touch an NFC interface on a
|
|
station to provision the credentials needed to access the network.
|