370 lines
8.9 KiB
Plaintext
Executable File
370 lines
8.9 KiB
Plaintext
Executable File
Info about setting up pppd daemon on FreeBSD-2.0
|
|
|
|
$Id$
|
|
|
|
Before you start setting up PPP on your machine make
|
|
sure that pppd is located in /usr/sbin and directory /etc/ppp
|
|
exists.
|
|
|
|
pppd can work in two modes:
|
|
|
|
i) as a "client" , i.e. you want to connect your machine to outside
|
|
world via PPP serial connection or modem line.
|
|
|
|
ii) as a "server" , i.e. your machine is located on the network and
|
|
used to connect other computers using PPP.
|
|
|
|
In both cases you will need to set up an options file ( /etc/ppp/options
|
|
or ~/.ppprc if you have more then one user on your machine that uses
|
|
PPP ).
|
|
|
|
You also will need some modem/serial software ( preferably kermit )
|
|
so you can dial and establish connection with remote host.
|
|
|
|
1) Working as a PPP client
|
|
|
|
I used the following options to connect to CISCO terminal server PPP
|
|
line.
|
|
|
|
----/etc/ppp/options-------
|
|
crtscts # enable hardware flow control
|
|
modem # modem control line
|
|
noipdefault # remote PPP server must supply your IP address.
|
|
# if the remote host doesn't send your IP during IPCP
|
|
# negotiation , remove this option
|
|
passive # wait for LCP packets
|
|
domain ppp.foo.com # put your domain name here
|
|
|
|
:<remote_ip> # put the IP of remote PPP host here
|
|
# it will be used to route packets via PPP link
|
|
# if you didn't specified the noipdefault option
|
|
# change this line to <local_ip>:<remote_ip>
|
|
|
|
defaultroute # put this if you want that PPP server will be your
|
|
# default router
|
|
-------------------------
|
|
|
|
To connect:
|
|
i) Dial to the remote host using kermit ( or other modem program )
|
|
enter your user name and password ( or whatever is needed to enable PPP
|
|
ont the remote host )
|
|
|
|
ii) Exit kermit. ( without hanging up the line )
|
|
|
|
iii) enter:
|
|
/usr/src/usr.sbin/pppd.new/pppd /dev/tty01 19200
|
|
( put the appropriate speed and device name )
|
|
|
|
Now your computer is connected with PPP. If the connection fails for some
|
|
reasons you can add the "debug" option to the /etc/ppp/options file
|
|
and check messages on the console to track the problem
|
|
|
|
Following script will make all 3 stages automatically:
|
|
-----/etc/ppp/pppup--------
|
|
#!/bin/sh
|
|
ps ax |grep pppd |grep -v grep
|
|
pid=`ps ax |grep pppd |grep -v grep|awk '{print $1;}'`
|
|
if [ "X${pid}" != "X" ] ; then
|
|
echo 'killing pppd, PID=' ${pid}
|
|
kill ${pid}
|
|
fi
|
|
ps ax |grep kermit |grep -v grep
|
|
pid=`ps ax |grep kermit |grep -v grep|awk '{print $1;}'`
|
|
if [ "X${pid}" != "X" ] ; then
|
|
echo 'killing kermit, PID=' ${pid}
|
|
kill -9 ${pid}
|
|
fi
|
|
|
|
ifconfig ppp0 down
|
|
ifconfig ppp0 delete
|
|
|
|
kermit -y /etc/ppp/kermit.dial
|
|
pppd /dev/tty01 19200
|
|
-----------------------------
|
|
|
|
/etc/ppp/kermit.dial is kermit script that dials and makes all
|
|
necessary authorization on the remote host.
|
|
( Example of such script is attached to the end of this document )
|
|
|
|
Use the follwing script to disconnect the PPP line:
|
|
-----/etc/ppp/pppdown--------
|
|
#!/bin/sh
|
|
pid=`ps ax |grep pppd |grep -v grep|awk '{print $1;}'`
|
|
if [ X${pid} != "X" ] ; then
|
|
echo 'killing pppd, PID=' ${pid}
|
|
kill -TERM ${pid}
|
|
fi
|
|
|
|
ps ax |grep kermit |grep -v grep
|
|
pid=`ps ax |grep kermit |grep -v grep|awk '{print $1;}'`
|
|
if [ "X${pid}" != "X" ] ; then
|
|
echo 'killing kermit, PID=' ${pid}
|
|
kill -9 ${pid}
|
|
fi
|
|
|
|
/sbin/ifconfig ppp0 down
|
|
/sbin/ifconfig ppp0 delete
|
|
kermit -y /etc/ppp/kermit.hup
|
|
/etc/ppp/ppptest
|
|
------------------------------
|
|
|
|
Check if PPP is still running:
|
|
|
|
-----/etc/ppp/ppptest---------
|
|
#!/bin/sh
|
|
pid=`ps ax| grep pppd |grep -v grep|awk '{print $1;}'`
|
|
if [ X${pid} != "X" ] ; then
|
|
echo 'pppd running: PID=' ${pid-NONE}
|
|
else
|
|
echo 'No pppd running.'
|
|
fi
|
|
set -x
|
|
netstat -n -I ppp0
|
|
ifconfig ppp0
|
|
-----------------------------
|
|
|
|
Hangs up modem line:
|
|
|
|
-----/etc/ppp/kermit.hup-----
|
|
set line /dev/tty01 ; put your modem device here
|
|
set speed 19200
|
|
set file type binary
|
|
set file names literal
|
|
set win 8
|
|
set rec pack 1024
|
|
set send pack 1024
|
|
set block 3
|
|
set term bytesize 8
|
|
set command bytesize 8
|
|
set flow none
|
|
|
|
pau 1
|
|
out +++
|
|
inp 5 OK
|
|
out ATH0\13
|
|
echo \13
|
|
exit
|
|
----------------------------
|
|
|
|
2) Working as a PPP server
|
|
|
|
------/etc/ppp/options------
|
|
crtscts # Hardware flow control
|
|
netmask 255.255.255.0 # netmask ( not required )
|
|
192.114.208.20:192.114.208.165 # ip's of local and remote hosts
|
|
# local ip must be different from one
|
|
# you assigned to the ethernet ( or other )
|
|
# interface on your machine.
|
|
# remote IP is ip address that will be
|
|
# assigned to the remote machine
|
|
domain ppp.foo.com # your domain
|
|
passive # wait for LCP
|
|
modem # modem line
|
|
----------------------------
|
|
|
|
Following script will enable ppp server on your machine
|
|
|
|
-----/etc/ppp/pppserv-------
|
|
#!/bin/sh
|
|
ps ax |grep pppd |grep -v grep
|
|
pid=`ps ax |grep pppd |grep -v grep|awk '{print $1;}'`
|
|
if [ "X${pid}" != "X" ] ; then
|
|
echo 'killing pppd, PID=' ${pid}
|
|
kill ${pid}
|
|
fi
|
|
ps ax |grep kermit |grep -v grep
|
|
pid=`ps ax |grep kermit |grep -v grep|awk '{print $1;}'`
|
|
if [ "X${pid}" != "X" ] ; then
|
|
echo 'killing kermit, PID=' ${pid}
|
|
kill -9 ${pid}
|
|
fi
|
|
|
|
# reset ppp interface
|
|
ifconfig ppp0 down
|
|
ifconfig ppp0 delete
|
|
|
|
# enable autoanswer mode
|
|
kermit -y /etc/ppp/kermit.ans
|
|
|
|
# run ppp
|
|
pppd /dev/tty01 19200
|
|
----------------------------
|
|
|
|
Use this script to stop ppp server:
|
|
|
|
-----/etc/ppp/pppservdown---
|
|
#!/bin/sh
|
|
ps ax |grep pppd |grep -v grep
|
|
pid=`ps ax |grep pppd |grep -v grep|awk '{print $1;}'`
|
|
if [ "X${pid}" != "X" ] ; then
|
|
echo 'killing pppd, PID=' ${pid}
|
|
kill ${pid}
|
|
fi
|
|
ps ax |grep kermit |grep -v grep
|
|
pid=`ps ax |grep kermit |grep -v grep|awk '{print $1;}'`
|
|
if [ "X${pid}" != "X" ] ; then
|
|
echo 'killing kermit, PID=' ${pid}
|
|
kill -9 ${pid}
|
|
fi
|
|
ifconfig ppp0 down
|
|
ifconfig ppp0 delete
|
|
|
|
kermit -y /etc/ppp/kermit.noans
|
|
----------------------------
|
|
|
|
Following kermit script will enable/disable autoanswer mode
|
|
on your modem:
|
|
|
|
-----/etc/ppp/kermit.ans----
|
|
set line /dev/tty01
|
|
set speed 19200
|
|
set file type binary
|
|
set file names literal
|
|
set win 8
|
|
set rec pack 1024
|
|
set send pack 1024
|
|
set block 3
|
|
set term bytesize 8
|
|
set command bytesize 8
|
|
set flow none
|
|
|
|
pau 1
|
|
out +++
|
|
inp 5 OK
|
|
out ATH0\13
|
|
inp 5 OK
|
|
echo \13
|
|
out ATS0=1\13 ; change this to out ATS0=0\13 if you want to disable
|
|
; autoanswer mod
|
|
inp 5 OK
|
|
echo \13
|
|
exit
|
|
-----------------------------
|
|
|
|
This script is used for dialing and authorizing on remote host.
|
|
You will need to customize it for your needs.
|
|
Put your login and password in this script , also you'll need
|
|
to change input statement depending on responces from your modem
|
|
and remote host.
|
|
|
|
-----/etc/ppp/kermit.dial----
|
|
|
|
;
|
|
; put the com line attached to the modem here:
|
|
;
|
|
set line /dev/tty01
|
|
;
|
|
; put the modem speed here:
|
|
;
|
|
set speed 19200
|
|
set file type binary ; full 8 bit file xfer
|
|
set file names literal
|
|
set win 8
|
|
set rec pack 1024
|
|
set send pack 1024
|
|
set block 3
|
|
set term bytesize 8
|
|
set command bytesize 8
|
|
set flow none
|
|
set modem hayes
|
|
set dial hangup off
|
|
set carrier auto ; Then SET CARRIER if necessary,
|
|
set dial display on ; Then SET DIAL if necessary,
|
|
set input echo on
|
|
set input timeout proceed
|
|
set input case ignore
|
|
def \%x 0 ; login prompt counter
|
|
goto slhup
|
|
|
|
:slcmd ; put the modem in command mode
|
|
echo Put the modem in command mode.
|
|
clear ; Clear unread characters from input buffer
|
|
pause 1
|
|
output +++ ; hayes escape sequence
|
|
input 1 OK\13\10 ; wait for OK
|
|
if success goto slhup
|
|
output \13
|
|
pause 1
|
|
output at\13
|
|
input 1 OK\13\10
|
|
if fail goto slcmd ; if modem doesn't answer OK, try again
|
|
|
|
:slhup ; hang up the phone
|
|
clear ; Clear unread characters from input buffer
|
|
pause 1
|
|
echo Hanging up the phone.
|
|
output ath0\13 ; hayes command for on hook
|
|
input 2 OK\13\10
|
|
if fail goto slcmd ; if no OK answer, put modem in command mode
|
|
|
|
:sldial ; dial the number
|
|
pause 1
|
|
echo Dialing.
|
|
output atdt9,550311\13\10 ; put phone number here
|
|
assign \%x 0 ; zero the time counter
|
|
|
|
:look
|
|
clear ; Clear unread characters from input buffer
|
|
increment \%x ; Count the seconds
|
|
input 1 {CONNECT }
|
|
if success goto sllogin
|
|
reinput 1 {NO CARRIER\13\10}
|
|
if success goto sldial
|
|
reinput 1 {NO DIALTONE\13\10}
|
|
if success goto slnodial
|
|
reinput 1 {\255}
|
|
if success goto slhup
|
|
reinput 1 {\127}
|
|
if success goto slhup
|
|
if < \%x 60 goto look
|
|
else goto slhup
|
|
|
|
:sllogin ; login
|
|
assign \%x 0 ; zero the time counter
|
|
pause 1
|
|
echo Looking for login prompt.
|
|
|
|
:slloop
|
|
increment \%x ; Count the seconds
|
|
clear ; Clear unread characters from input buffer
|
|
output \13
|
|
;
|
|
; put your expected login prompt here:
|
|
;
|
|
input 1 {Username: }
|
|
if success goto sluid
|
|
reinput 1 {\255}
|
|
if success goto slhup
|
|
reinput 1 {\127}
|
|
if success goto slhup
|
|
if < \%x 10 goto slloop ; try 10 times to get a login prompt
|
|
else goto slhup ; hang up and start again if 10 failures
|
|
|
|
:sluid
|
|
;
|
|
; put your userid here:
|
|
;
|
|
output ppp-login\13
|
|
input 1 {Password: }
|
|
;
|
|
; put your password here:
|
|
;
|
|
output ppp-password\13
|
|
input 1 {Entering SLIP mode.}
|
|
echo
|
|
quit
|
|
|
|
:slnodial
|
|
echo \7No dialtone. Check the telephone line!\7
|
|
exit 1
|
|
|
|
; local variables:
|
|
; mode: csh
|
|
; comment-start: "; "
|
|
; comment-start-skip: "; "
|
|
; end:
|
|
------------------------
|
|
|
|
###################################################################
|
|
Gennady B. Sorokopud ( gena@NetVision.net.il ) 24/10/94 12:00
|