freebsd-skq/usr.sbin/wicontrol/wicontrol.8
imp 395dec52c7 Warn that hex keys are the most portable.
Submitted by: Gregory Bond <gnb@itga.com.au>
Pr: 40872
2002-08-12 06:59:04 +00:00

471 lines
14 KiB
Groff

.\" Copyright (c) 1997, 1998, 1999
.\" Bill Paul <wpaul@ctr.columbia.edu> All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\" must display the following acknowledgement:
.\" This product includes software developed by Bill Paul.
.\" 4. Neither the name of the author nor the names of any co-contributors
.\" may be used to endorse or promote products derived from this software
.\" without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
.\" THE POSSIBILITY OF SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd April 21, 1999
.Dt WICONTROL 8
.Os
.Sh NAME
.Nm wicontrol
.Nd configure WaveLAN/IEEE devices
.Sh SYNOPSIS
.Nm
.Op Fl i
.Ar iface Op Fl o
.Nm
.Op Fl i
.Ar iface Fl t Ar tx_rate
.Nm
.Op Fl i
.Ar iface Fl n Ar network_name
.Nm
.Op Fl i
.Ar iface Fl s Ar station_name
.Nm
.Op Fl i
.Ar iface Fl c Cm 0 | 1
.Nm
.Op Fl i
.Ar iface Fl q Ar SSID
.Nm
.Op Fl i
.Ar iface Fl p Ar port_type
.Nm
.Op Fl i
.Ar iface Fl a Ar access_point_density
.Nm
.Op Fl i
.Ar iface Fl m Ar mac_address
.Nm
.Op Fl i
.Ar iface Fl d Ar max_data_length
.Nm
.Op Fl i
.Ar iface Fl e Cm 0 | 1
.Nm
.Op Fl i
.Ar iface Fl k Ar key
.Op Fl v Cm 1 | 2 | 3 | 4
.Nm
.Op Fl i
.Ar iface Fl T Cm 1 | 2 | 3 | 4
.Nm
.Op Fl i
.Ar iface Fl r Ar RTS_threshold
.Nm
.Op Fl i
.Ar iface Fl f Ar frequency
.Nm
.Op Fl i
.Ar iface Fl P Cm 0 | 1
.Nm
.Op Fl i
.Ar iface Fl S Ar max_sleep_duration
.Nm
.Op Fl i
.Ar iface Fl Z
(zero signal cache)
.Nm
.Op Fl i
.Ar iface Fl C
(display signal cache)
.Nm
.Op Fl i
.Ar iface Fl L
(list avail access points)
.Nm
.Op Fl i
.Ar iface Fl l
(dump associated stations)
.Sh DESCRIPTION
The
.Nm
utility controls the operation of WaveLAN/IEEE wireless networking
devices via the
.Xr wi 4
driver.
Most of the parameters that can be changed relate to the
IEEE 802.11 protocol which the WaveLAN implements.
This includes
the station name, whether the station is operating in ad-hoc (point
to point) or BSS (service set) mode, and the network name of a service
set to join (IBSS) if BSS mode is enabled.
The
.Nm
utility can also be used to view the current settings of these parameters
and to dump out the values of the card's statistics counters.
.Pp
The
.Ar iface
argument given to
.Nm
should be the logical interface name associated with the WaveLAN/IEEE
device
.Li ( wi0 , wi1 ,
etc.).
If none is specified then
.Dq Li wi0
is used as default.
.Sh OPTIONS
The options are as follows:
.Bl -tag -width indent
.It Oo Fl i Oc Ar iface Op Fl o
Display the current settings of the specified WaveLAN/IEEE interface.
This retrieves the current card settings from the driver and prints them
out.
Using the additional
.Fl o
flag will cause
.Nm
to print out the statistics counters instead of the card settings.
Encryption keys are only displayed if
.Nm
is run as root.
.It Oo Fl i Oc Ar iface Fl t Ar tx_rate
Set the transmit rate of the specified interface.
The legal values
for the transmit rate vary depending on whether the interface is a
standard WaveLAN/IEEE or a WaveLAN/IEEE Turbo adapter.
The standard
NICs support a maximum transmit rate of 2Mbps while the turbo NICs
support a maximum speed of 6Mbps.
The following table shows the
legal transmit rate settings and the corresponding transmit speeds:
.Bl -column ".Em TX\ rate" ".Em NIC\ speed" -offset indent
.Em "TX rate NIC speed"
.It Cm 1 Ta "Fixed Low (1Mbps)"
.It Cm 2 Ta "Fixed Standard (2Mbps)"
.It Cm 3 Ta "Auto Rate Select (High)"
.It Cm 4 Ta "Fixed Medium (4Mbps)"
.It Cm 5 Ta "Fixed High (6Mbps)"
.It Cm 6 Ta "Auto Rate Select (Standard)"
.It Cm 7 Ta "Auto Rate Select (Medium)"
.El
.Pp
The standard NICs support only settings
.Cm 1
through
.Cm 3 .
Turbo NICs support all the above listed speed settings.
The default driver setting is
.Cm 3
(auto rate select).
.It Oo Fl i Oc Ar iface Fl n Ar network_name
Set the name of the service set (IBSS) that this station wishes to
join.
The
.Ar network_name
can be any text string up to 30 characters in length.
The default name
is the string
.Dq Li ANY
which should allow the station to connect to the first
available access point.
The interface should be set for BSS mode using
the
.Fl p
flag in order for this to work.
.Pp
Note: the WaveLAN manual indicates that an empty string will allow the
host to connect to any access point, however I have also seen a reference
in another driver which indicates that the
.Dq Li ANY
string works as well.
.It Oo Fl i Oc Ar iface Fl s Ar station_name
Sets the
station name
for the specified interface.
The
.Ar station_name
is used for diagnostic purposes.
The
.Tn "Lucent WaveMANAGER"
software can
poll the names of remote hosts.
.It Oo Fl i Oc Ar iface Fl c Cm 0 | 1
Allow the station to create a service set (IBSS).
Permitted values are
.Cm 0
(don't create IBSS) and
.Cm 1
(enable creation of IBSS).
The default is
.Cm 0 .
.Pp
Note: this option is provided for experimental purposes only: enabling
the creation of an IBSS on a host system doesn't appear to actually work.
.It Oo Fl i Oc Ar iface Fl q Ar SSID
Specify the name of an IBSS (SSID) to create on a given interface.
The
.Ar SSID
can be any text string up to 30 characters long.
.Pp
Note: this option is provided for experimental purposes only: enabling
the creation of an IBSS on a host system doesn't appear to actually work.
.It Oo Fl i Oc Ar iface Fl p Ar port_type
Set the
port type
for a specified interface.
The legal values for
.Ar port_type
are
.Cm 1
(BSS mode) and
.Cm 3
(ad-hoc) mode.
In ad-hoc mode, the station can
communicate directly with any other stations within direct radio range
(provided that they are also operating in ad-hoc mode).
In BSS mode,
hosts must associate with a service set controlled by an access point,
which relays traffic between end stations.
The default setting is
.Cm 3
(ad-hoc mode).
.It Oo Fl i Oc Ar iface Fl a Ar access_point_density
Specify the
access point density
for a given interface.
Legal values are
.Cm 1
(low),
.Cm 2
(medium) and
.Cm 3
(high).
This setting influences some of the radio modem threshold settings.
.It Oo Fl i Oc Ar iface Fl m Ar mac_address
Set the station address for the specified interface.
The
.Ar mac_address
is specified as a series of six hexadecimal values separated by colons,
e.g.,
.Dq Li 00:60:1d:12:34:56 .
This programs the new address into the card
and updates the interface as well.
.It Oo Fl i Oc Ar iface Fl d Ar max_data_length
Set the maximum receive and transmit frame size for a specified interface.
The
.Ar max_data_length
can be any number from 350 to 2304.
The default is 2304.
.It Oo Fl i Oc Ar iface Fl e Cm 0 | 1
Enable or disable WEP encryption.
Permitted values are
.Cm 0
(encryption disabled) or
.Cm 1
(encryption enabled).
Encryption is off by default.
.Pp
Both 128-bit and 64-bit WEP have been broken.
See the
.Sx BUGS
section for details.
.It Oo Fl i Oc Ar iface Fl k Ar key Op Fl v Cm 1 | 2 | 3 | 4
Set WEP encryption keys.
There are four default encryption keys
that can be programmed.
A specific key can be set using
the
.Fl v
flag.
If the
.Fl v
flag is not specified, the first key will be set.
Encryption keys
can either be normal text (i.e.\&
.Dq Li hello )
or a series of hexadecimal digits (i.e.\&
.Dq Li 0x1234512345 ) .
For
WaveLAN Turbo Silver cards, the key is restricted to 40 bits, hence
the key can be either a 5 character text string or 10 hex digits.
For WaveLAN Turbo Gold cards, the key can also be 104 bits,
which means the key can be specified as either a 13 character text
string or 26 hex digits in addition to the formats supported by the
Silver cards.
.Pp
For maximum portability, hex keys are recommended;
the mapping of text keys to WEP encryption is usually driver-specific.
In particular, the Windows drivers do this mapping differently to FreeBSD.
.Pp
Note: Both 128-bit and 64-bit WEP encryption have been broken.
See the
.Sx BUGS
section for details.
.It Oo Fl i Oc Ar iface Fl T Cm 1 | 2 | 3 | 4
Specify which of the four WEP encryption keys will be used to
encrypt transmitted packets.
.Pp
Note: Both 128-bit and 64-bit WEP have been broken.
See the
.Sx BUGS
section for details.
.It Oo Fl i Oc Ar iface Fl r Ar RTS_threshold
Set the RTS/CTS threshold for a given interface.
This controls the
number of bytes used for the RTS/CTS handshake boundary.
The
.Ar RTS_threshold
can be any value between 0 and 2347.
The default is 2347.
.It Oo Fl i Oc Ar iface Fl f Ar frequency
Set the radio frequency of a given interface.
The
.Ar frequency
should be specified as a channel ID as shown in the table below.
The
list of available frequencies is dependent on radio regulations specified
by regional authorities.
Recognized regulatory authorities include
the FCC (United States), ETSI (Europe), France and Japan.
Frequencies
in the table are specified in Mhz.
.Bl -column ".Em Channel\ ID" ".Em FCC" ".Em ETSI" ".Em France" ".Em Japan" -offset indent
.Em "Channel ID FCC ETSI France Japan"
.It Cm 1 Ta "2412 2412 - 2412"
.It Cm 2 Ta "2417 2417 - 2417"
.It Cm 3 Ta "2422 2422 - 2422"
.It Cm 4 Ta "2427 2427 - 2427"
.It Cm 5 Ta "2432 2432 - 2432"
.It Cm 6 Ta "2437 2437 - 2437"
.It Cm 7 Ta "2442 2442 - 2442"
.It Cm 8 Ta "2447 2447 - 2447"
.It Cm 9 Ta "2452 2452 - 2452"
.It Cm 10 Ta "2457 2457 2457 2457"
.It Cm 11 Ta "2462 2462 2462 2462"
.It Cm 12 Ta "- 2467 2467 2467"
.It Cm 13 Ta "- 2472 2472 2472"
.It Cm 14 Ta "- - - 2484"
.El
.Pp
If an illegal channel is specified, the
NIC will revert to its default channel.
For NICs sold in the United States
and Europe, the default channel is
.Cm 3 .
For NICs sold in France, the default channel is
.Cm 11 .
For NICs sold in Japan, the default channel is
.Cm 14 ,
and it is the only available channel for pre-11Mbps NICs.
Note that two stations must be set to the same channel in order to
communicate.
.It Oo Fl i Oc Ar iface Fl P Cm 0 | 1
Enable or disable power management on a given interface.
Enabling
power management uses an alternating sleep/wake protocol to help
conserve power on mobile stations, at the cost of some increased
receive latency.
Power management is off by default.
Note that power
management requires the cooperation of an access point in order to
function; it is not functional in ad-hoc mode.
Also, power management
is only implemented in Lucent WavePOINT firmware version 2.03 or
later, and in WaveLAN PCMCIA adapter firmware 2.00 or later.
Older
revisions will silently ignore the power management setting.
Legal
values for this parameter are
.Cm 0
(off) and
.Cm 1
(on).
.It Oo Fl i Oc Ar iface Fl S Ar max_sleep_interval
Specify the sleep interval to use when power management is enabled.
The
.Ar max_sleep_interval
is specified in milliseconds.
The default is 100.
.It Oo Fl i Oc Ar iface Fl Z
Clear the signal strength cache maintained internally by the
.Xr wi 4
driver.
.It Oo Fl i Oc Ar iface Fl C
Display the cached signal strength information maintained by the
.Xr wi 4
driver.
The driver retains information about signal strength and
noise level for packets received from different hosts.
The signal
strength and noise level values are displayed in units of dBms.
The signal quality values is produced by subtracting the noise level
from the signal strength (i.e. less noise and better signal yields
better signal quality).
.El
.Sh SEE ALSO
.Xr ipsec 4 ,
.Xr wi 4 ,
.Xr ifconfig 8
.Sh BUGS
The WEP encryption method has been broken so that third parties
can recover the keys in use relatively quickly at distances that are
surprising to most people.
Do not rely on WEP for anything but the most basic, remedial security.
IPSEC will give you a higher level of security and should be used
whenever possible.
Do not trust access points or wireless machines that connect through
them as they can provide no assurance that the traffic is legitimate.
MAC addresses can easily be forged and should therefore not be used as
the only access control.
.Pp
The attack on WEP is a passive attack, requiring only the ability to
sniff packets on the network.
The passive attack can be launched at a distance larger, up to many
miles, than one might otherwise expect given a specialized antenna
used in point to point applications.
The attacker can recover the keys from a 128-bit WEP network with only
5,000,000 to 6,000,000 packets.
While this may sound like a large number of packets, emperical
evidence suggests that this amount of traffic is generated in a few
hours on a partially loaded network.
Once a key has been compromised, the only remedial action is to
discontinue it and use a new key.
.Pp
See
.Pa http://www.cs.rice.edu/~astubble/wep/wep_attack.html
for details of the attack.
.Pp
If you must use WEP, you are strongly encouraged to pick keys whose
bytes are random and not confined to ASCII characters.
.Sh HISTORY
The
.Nm
utility first appeared in
.Fx 3.0 .
.Sh AUTHORS
The
.Nm
utility was written by
.An Bill Paul Aq wpaul@ctr.columbia.edu .