fa21035b4e
of the individual drivers and into the common routine ether_input(). Also, remove the (incomplete) hack for matching ethernet headers in the ip_fw code. The good news: net result of 1016 lines removed, and this should make bridging now work with *all* Ethernet drivers. The bad news: it's nearly impossible to test every driver, especially for bridging, and I was unable to get much testing help on the mailing lists. Reviewed by: freebsd-net
1963 lines
44 KiB
C
1963 lines
44 KiB
C
/*
|
|
* Copyright (c) 1999, Traakan Software
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice unmodified, this list of conditions, and the following
|
|
* disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* Intel Gigabit Ethernet (82452) Driver.
|
|
* Inspired by fxp driver by David Greenman for FreeBSD, and by
|
|
* Bill Paul's work in other FreeBSD network drivers.
|
|
*/
|
|
|
|
/*
|
|
* Options
|
|
*/
|
|
|
|
/*
|
|
* Use only every other 16 byte receive descriptor, leaving the ones
|
|
* in between empty. This card is most efficient at reading/writing
|
|
* 32 byte cache lines, so avoid all the (not working for early rev
|
|
* cards) MWI and/or READ/MODIFY/WRITE cycles updating one descriptor
|
|
* would have you do.
|
|
*
|
|
* This isn't debugged yet.
|
|
*/
|
|
/* #define PADDED_CELL 1 */
|
|
/*
|
|
* Enable JumboGrams. This seems to work.
|
|
*/
|
|
/* #define WX_JUMBO 1 */
|
|
|
|
/*
|
|
* Since the includes are a mess, they'll all be in if_wxvar.h
|
|
*/
|
|
|
|
#if defined(__NetBSD__)
|
|
#include <dev/pci/if_wxvar.h>
|
|
#elif defined(__FreeBSD__)
|
|
#include <pci/if_wxvar.h>
|
|
#endif
|
|
|
|
#ifdef __alpha__
|
|
#undef vtophys
|
|
#define vtophys(va) alpha_XXX_dmamap((vm_offset_t)(va))
|
|
#endif /* __alpha__ */
|
|
|
|
/*
|
|
* Function Prototpes, yadda yadda...
|
|
*/
|
|
|
|
static int wx_intr __P((void *));
|
|
static void wx_handle_link_intr __P((wx_softc_t *));
|
|
static void wx_handle_rxint __P((wx_softc_t *));
|
|
static void wx_gc __P((wx_softc_t *));
|
|
static void wx_start __P((struct ifnet *));
|
|
static int wx_ioctl __P((struct ifnet *, IOCTL_CMD_TYPE, caddr_t));
|
|
static int wx_ifmedia_upd __P((struct ifnet *));
|
|
static void wx_ifmedia_sts __P((struct ifnet *, struct ifmediareq *));
|
|
static int wx_init __P((void *));
|
|
static void wx_hw_stop __P((wx_softc_t *));
|
|
static void wx_set_addr __P((wx_softc_t *, int, u_int8_t *));
|
|
static int wx_hw_initialize __P((wx_softc_t *));
|
|
static void wx_stop __P((wx_softc_t *));
|
|
static void wx_watchdog __P((struct ifnet *));
|
|
static int wx_get_rbuf __P((wx_softc_t *, rxpkt_t *));
|
|
static void wx_rxdma_map __P((wx_softc_t *, rxpkt_t *, struct mbuf *));
|
|
|
|
static INLINE void wx_eeprom_raise_clk __P((wx_softc_t *, u_int32_t));
|
|
static INLINE void wx_eeprom_lower_clk __P((wx_softc_t *, u_int32_t));
|
|
static INLINE void wx_eeprom_sobits __P((wx_softc_t *, u_int16_t, u_int16_t));
|
|
static INLINE u_int16_t wx_eeprom_sibits __P((wx_softc_t *));
|
|
static INLINE void wx_eeprom_cleanup __P((wx_softc_t *));
|
|
static INLINE u_int16_t wx_read_eeprom_word __P((wx_softc_t *, int));
|
|
static void wx_read_eeprom __P((wx_softc_t *, u_int16_t *, int, int));
|
|
|
|
static int wx_attach_common __P((wx_softc_t *));
|
|
static void wx_stats_update __P((void *));
|
|
|
|
static INLINE void wx_mwi_whackon __P((wx_softc_t *));
|
|
static INLINE void wx_mwi_unwhack __P((wx_softc_t *));
|
|
static int wx_dring_setup __P((wx_softc_t *));
|
|
static void wx_dring_teardown __P((wx_softc_t *));
|
|
|
|
#define WX_DISABLE_INT(sc) WRITE_CSR(sc, WXREG_IMCLR, WXDISABLE)
|
|
#define WX_ENABLE_INT(sc) WRITE_CSR(sc, WXREG_IMASK, sc->wx_ienable)
|
|
|
|
#define JUMBOMTU (WX_MAX_PKT_SIZE_JUMBO - sizeof (struct ether_header))
|
|
#ifdef WX_JUMBO
|
|
#define WX_MAXMTU JUMBOMTU
|
|
#else
|
|
#define WX_MAXMTU ETHERMTU
|
|
#endif
|
|
|
|
#if defined(__NetBSD__)
|
|
#ifdef __BROKEN_INDIRECT_CONFIG
|
|
#define MATCHARG void *
|
|
#else
|
|
#define MATCHARG struct cfdata *
|
|
#endif
|
|
|
|
static int wx_match __P((struct device *, MATCHARG, void *));
|
|
static void wx_attach __P((struct device *, struct device *, void *));
|
|
static void wx_shutdown __P((void *));
|
|
static int wx_ether_ioctl __P((struct ifnet *, IOCTL_CMD_TYPE, caddr_t));
|
|
static int wx_mc_setup __P((wx_softc_t *));
|
|
#define ether_ioctl wx_ether_ioctl
|
|
|
|
/*
|
|
* Life *should* be simple- we only read/write 32 bit values in registers.
|
|
* Unfortunately, some platforms define bus_space functions in a fashion
|
|
* such that they cannot be used as part of a for loop, for example.
|
|
*/
|
|
|
|
static INLINE u_int32_t _read_csr __P((struct wx_softc *, u_int32_t));
|
|
static INLINE void _write_csr __P((struct wx_softc *, u_int32_t, u_int32_t));
|
|
|
|
static INLINE u_int32_t _read_csr(sc, reg)
|
|
struct wx_softc *sc;
|
|
u_int32_t reg;
|
|
{
|
|
return bus_space_read_4(sc->w.st, sc->w.sh, reg);
|
|
}
|
|
|
|
static INLINE void _write_csr(sc, reg, val)
|
|
struct wx_softc *sc;
|
|
u_int32_t reg;
|
|
u_int32_t val;
|
|
{
|
|
bus_space_write_4(sc->w.st, sc->w.sh, reg, val);
|
|
}
|
|
|
|
|
|
|
|
static wx_softc_t *wxlist;
|
|
|
|
struct cfattach wx_ca = {
|
|
sizeof (wx_softc_t), wx_match, wx_attach
|
|
};
|
|
|
|
/*
|
|
* Check if a device is an 82452.
|
|
*/
|
|
static int
|
|
wx_match(parent, match, aux)
|
|
struct device *parent;
|
|
MATCHARG match;
|
|
void *aux;
|
|
{
|
|
struct pci_attach_args *pa = aux;
|
|
if (PCI_VENDOR(pa->pa_id) != WX_VENDOR_INTEL) {
|
|
return (0);
|
|
}
|
|
if (PCI_PRODUCT(pa->pa_id) != WX_PRODUCT_82452) {
|
|
return (0);
|
|
}
|
|
return (1);
|
|
}
|
|
|
|
static void
|
|
wx_attach(parent, self, aux)
|
|
struct device *parent, *self;
|
|
void *aux;
|
|
{
|
|
wx_softc_t *tmp, *sc = (wx_softc_t *)self;
|
|
struct pci_attach_args *pa = aux;
|
|
pci_chipset_tag_t pc = pa->pa_pc;
|
|
pci_intr_handle_t ih;
|
|
const char *intrstr = NULL;
|
|
u_int32_t data;
|
|
struct ifnet *ifp;
|
|
|
|
sc->w.pci_pc = pa->pa_pc;
|
|
sc->w.pci_tag = pa->pa_tag;
|
|
|
|
/*
|
|
* Map control/status registers.
|
|
*/
|
|
if (pci_mapreg_map(pa, WX_MMBA, PCI_MAPREG_TYPE_MEM, 0,
|
|
&sc->w.st, &sc->w.sh, NULL, NULL)) {
|
|
printf(": can't map registers\n");
|
|
return;
|
|
}
|
|
printf(": Intel GigaBit Ethernet\n");
|
|
|
|
/*
|
|
* Allocate our interrupt.
|
|
*/
|
|
if (pci_intr_map(pc, pa->pa_intrtag, pa->pa_intrpin,
|
|
pa->pa_intrline, &ih)) {
|
|
printf("%s: couldn't map interrupt\n", sc->wx_name);
|
|
return;
|
|
}
|
|
intrstr = pci_intr_string(pc, ih);
|
|
sc->w.ih = pci_intr_establish(pc, ih, IPL_NET, wx_intr, sc);
|
|
if (sc->w.ih == NULL) {
|
|
printf("%s: couldn't establish interrupt", sc->wx_name);
|
|
if (intrstr != NULL)
|
|
printf(" at %s", intrstr);
|
|
printf("\n");
|
|
return;
|
|
}
|
|
printf("%s: interrupting at %s\n", sc->wx_name, intrstr);
|
|
sc->revision =
|
|
pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_CLASS_REG) & 0xff;
|
|
|
|
data = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_BHLC_REG);
|
|
data &= ~(PCI_CACHELINE_MASK << PCI_CACHELINE_SHIFT);
|
|
data |= (WX_CACHELINE_SIZE << PCI_CACHELINE_SHIFT);
|
|
pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_BHLC_REG, data);
|
|
|
|
if (wx_attach_common(sc)) {
|
|
return;
|
|
}
|
|
|
|
printf("%s: Ethernet address %s\n",
|
|
sc->wx_name, ether_sprintf(sc->wx_enaddr));
|
|
|
|
ifp = &sc->w.ethercom.ec_if;
|
|
bcopy(sc->wx_name, ifp->if_xname, IFNAMSIZ);
|
|
ifp->if_mtu = WX_MAXMTU;
|
|
ifp->if_softc = sc;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = wx_ioctl;
|
|
ifp->if_start = wx_start;
|
|
ifp->if_watchdog = wx_watchdog;
|
|
|
|
/*
|
|
* Attach the interface.
|
|
*/
|
|
if_attach(ifp);
|
|
ether_ifattach(ifp, sc->wx_enaddr);
|
|
#if NBPFILTER > 0
|
|
bpfattach(&sc->w.ethercom.ec_if.if_bpf, ifp, DLT_EN10MB,
|
|
sizeof (struct ether_header));
|
|
#endif
|
|
/*
|
|
* Add shutdown hook so that DMA is disabled prior to reboot. Not
|
|
* doing do could allow DMA to corrupt kernel memory during the
|
|
* reboot before the driver initializes.
|
|
*/
|
|
shutdownhook_establish(wx_shutdown, sc);
|
|
|
|
tmp = wxlist;
|
|
if (tmp) {
|
|
while (tmp->wx_next)
|
|
tmp = tmp->wx_next;
|
|
tmp->wx_next = sc;
|
|
} else {
|
|
wxlist = sc;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Device shutdown routine. Called at system shutdown after sync. The
|
|
* main purpose of this routine is to shut off receiver DMA so that
|
|
* kernel memory doesn't get clobbered during warmboot.
|
|
*/
|
|
static void
|
|
wx_shutdown(sc)
|
|
void *sc;
|
|
{
|
|
wx_hw_stop((wx_softc_t *) sc);
|
|
}
|
|
|
|
static int
|
|
wx_ether_ioctl(ifp, cmd, data)
|
|
struct ifnet *ifp;
|
|
IOCTL_CMD_TYPE cmd;
|
|
caddr_t data;
|
|
{
|
|
struct ifaddr *ifa = (struct ifaddr *) data;
|
|
int error = 0;
|
|
wx_softc_t *sc = SOFTC_IFP(ifp);
|
|
|
|
switch (cmd) {
|
|
case SIOCSIFADDR:
|
|
ifp->if_flags |= IFF_UP;
|
|
error = wx_init(sc);
|
|
if (error) {
|
|
ifp->if_flags &= ~IFF_UP;
|
|
break;
|
|
}
|
|
switch (ifa->ifa_addr->sa_family) {
|
|
#ifdef INET
|
|
case AF_INET:
|
|
arp_ifinit(ifp, ifa);
|
|
break;
|
|
#endif
|
|
#ifdef NS
|
|
case AF_NS:
|
|
{
|
|
register struct ns_addr *ina = &IA_SNS(ifa)->sns_addr;
|
|
if (ns_nullhost(*ina))
|
|
ina->x_host = *(union ns_host *)
|
|
LLADDR(ifp->if_sadl);
|
|
else
|
|
bcopy(ina->x_host.c_host, LLADDR(ifp->if_sadl),
|
|
ifp->if_addrlen);
|
|
break;
|
|
}
|
|
#endif
|
|
default:
|
|
break;
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Program multicast addresses.
|
|
*
|
|
* This function must be called at splimp, but it may sleep.
|
|
*/
|
|
static int
|
|
wx_mc_setup(sc)
|
|
wx_softc_t *sc;
|
|
{
|
|
struct ifnet *ifp = &sc->wx_if;
|
|
struct ether_multistep step;
|
|
struct ether_multi *enm;
|
|
|
|
/*
|
|
* XXX: drain TX queue- use a tsleep/wakeup until done.
|
|
*/
|
|
if (sc->tactive) {
|
|
return (EBUSY);
|
|
}
|
|
|
|
wx_stop(sc);
|
|
|
|
if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
|
|
sc->all_mcasts = 1;
|
|
return (wx_init(sc));
|
|
}
|
|
|
|
ETHER_FIRST_MULTI(step, &sc->w.ethercom, enm);
|
|
while (enm != NULL) {
|
|
if (memcmp(enm->enm_addrlo, enm->enm_addrhi, 6) != 0)
|
|
continue;
|
|
if (sc->wx_nmca >= WX_RAL_TAB_SIZE-1) {
|
|
sc->wx_nmca = 0;
|
|
sc->all_mcasts = 1;
|
|
break;
|
|
}
|
|
bcopy(enm->enm_addrlo,
|
|
(void *) &sc->wx_mcaddr[sc->wx_nmca++][0], 6);
|
|
ETHER_NEXT_MULTI(step, enm);
|
|
}
|
|
return (wx_init(sc));
|
|
}
|
|
|
|
static INLINE void
|
|
wx_mwi_whackon(sc)
|
|
wx_softc_t *sc;
|
|
{
|
|
sc->wx_cmdw =
|
|
pci_conf_read(sc->w.pci_pc, sc->w.pci_tag, PCI_COMMAND_STATUS_REG);
|
|
pci_conf_write(sc->w.pci_pc, sc->w.pci_tag,
|
|
PCI_COMMAND_STATUS_REG, sc->wx_cmdw & ~MWI);
|
|
}
|
|
|
|
static INLINE void
|
|
wx_mwi_unwhack(sc)
|
|
wx_softc_t *sc;
|
|
{
|
|
if (sc->wx_cmdw & MWI) {
|
|
pci_conf_write(sc->w.pci_pc, sc->w.pci_tag,
|
|
PCI_COMMAND_STATUS_REG, sc->wx_cmdw & ~MWI);
|
|
}
|
|
}
|
|
|
|
static int
|
|
wx_dring_setup(sc)
|
|
wx_softc_t *sc;
|
|
{
|
|
size_t len;
|
|
|
|
len = sizeof (wxrd_t) * WX_MAX_RDESC;
|
|
if (len > NBPG) {
|
|
printf("%s: len (%lx) over a page for the receive ring\n",
|
|
sc->wx_name, len);
|
|
return (-1);
|
|
}
|
|
len = NBPG;
|
|
sc->rdescriptors = (wxrd_t *) WXMALLOC(len);
|
|
if (sc->rdescriptors == NULL) {
|
|
printf("%s: could not allocate rcv descriptors\n", sc->wx_name);
|
|
return (-1);
|
|
}
|
|
|
|
if (((u_long)sc->rdescriptors) & 0xfff) {
|
|
printf("%s: rcv descriptors not 4KB aligned\n", sc->wx_name);
|
|
return (-1);
|
|
}
|
|
bzero(sc->rdescriptors, len);
|
|
|
|
len = sizeof (wxtd_t) * WX_MAX_TDESC;
|
|
if (len > NBPG) {
|
|
printf("%s: len (%lx) over a page for the xmit ring\n",
|
|
sc->wx_name, len);
|
|
return (-1);
|
|
}
|
|
len = NBPG;
|
|
sc->tdescriptors = (wxtd_t *) WXMALLOC(len);
|
|
if (sc->tdescriptors == NULL) {
|
|
printf("%s: could not allocate xmt descriptors\n", sc->wx_name);
|
|
return (-1);
|
|
}
|
|
if (((u_long)sc->tdescriptors) & 0xfff) {
|
|
printf("%s: xmt descriptors not 4KB aligned\n", sc->wx_name);
|
|
return (-1);
|
|
}
|
|
bzero(sc->tdescriptors, len);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
wx_dring_teardown(sc)
|
|
wx_softc_t *sc;
|
|
{
|
|
if (sc->rdescriptors) {
|
|
WXFREE(sc->rdescriptors);
|
|
sc->rdescriptors = NULL;
|
|
}
|
|
if (sc->tdescriptors) {
|
|
WXFREE(sc->tdescriptors);
|
|
sc->tdescriptors = NULL;
|
|
}
|
|
}
|
|
|
|
#elif defined(__FreeBSD__)
|
|
static int wx_mc_setup __P((wx_softc_t *));
|
|
/*
|
|
* Program multicast addresses.
|
|
*
|
|
* This function must be called at splimp, but it may sleep.
|
|
*/
|
|
static int
|
|
wx_mc_setup(sc)
|
|
wx_softc_t *sc;
|
|
{
|
|
struct ifnet *ifp = &sc->wx_if;
|
|
struct ifmultiaddr *ifma;
|
|
|
|
/*
|
|
* XXX: drain TX queue- use a tsleep/wakeup until done.
|
|
*/
|
|
if (sc->tactive) {
|
|
return (EBUSY);
|
|
}
|
|
|
|
wx_stop(sc);
|
|
|
|
if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
|
|
sc->all_mcasts = 1;
|
|
return (wx_init(sc));
|
|
}
|
|
|
|
for (ifma = ifp->if_multiaddrs.lh_first, sc->wx_nmca = 0;
|
|
ifma != NULL; ifma = ifma->ifma_link.le_next) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK) {
|
|
continue;
|
|
}
|
|
if (sc->wx_nmca >= WX_RAL_TAB_SIZE-1) {
|
|
sc->wx_nmca = 0;
|
|
sc->all_mcasts = 1;
|
|
break;
|
|
}
|
|
bcopy(LLADDR((struct sockaddr_dl *)ifma->ifma_addr),
|
|
(void *) &sc->wx_mcaddr[sc->wx_nmca++][0], 6);
|
|
}
|
|
return (wx_init(sc));
|
|
}
|
|
|
|
/*
|
|
* Return identification string if this is device is ours.
|
|
*/
|
|
static wx_softc_t *wxlist;
|
|
static int
|
|
wx_probe(device_t dev)
|
|
{
|
|
if ((pci_get_vendor(dev) == WX_VENDOR_INTEL) &&
|
|
(pci_get_device(dev) == WX_PRODUCT_82452)) {
|
|
device_set_desc(dev, "Intel GigaBit Ethernet");
|
|
return 0;
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
wx_attach(device_t dev)
|
|
{
|
|
int error = 0;
|
|
wx_softc_t *tmp, *sc = device_get_softc(dev);
|
|
struct ifnet *ifp;
|
|
int s;
|
|
u_long val;
|
|
int rid;
|
|
|
|
bzero(sc, sizeof (wx_softc_t));
|
|
|
|
callout_handle_init(&sc->w.sch);
|
|
sc->w.dev = dev;
|
|
|
|
if (getenv_int("wx_debug", &rid)) {
|
|
if (rid & (1 << device_get_unit(dev))) {
|
|
sc->wx_debug = 1;
|
|
}
|
|
}
|
|
|
|
if (getenv_int("wx_no_ilos", &rid)) {
|
|
if (rid & (1 << device_get_unit(dev))) {
|
|
sc->wx_no_ilos = 1;
|
|
}
|
|
}
|
|
|
|
if (getenv_int("wx_ilos", &rid)) {
|
|
if (rid & (1 << device_get_unit(dev))) {
|
|
sc->wx_ilos = 1;
|
|
}
|
|
}
|
|
|
|
if (getenv_int("wx_no_flow", &rid)) {
|
|
if (rid & (1 << device_get_unit(dev))) {
|
|
sc->wx_no_flow = 1;
|
|
}
|
|
}
|
|
|
|
s = splimp();
|
|
/*
|
|
* Enable bus mastering, make sure that the cache line size is right.
|
|
*/
|
|
val = pci_read_config(dev, PCIR_COMMAND, 2);
|
|
val |= (PCIM_CMD_MEMEN|PCIM_CMD_BUSMASTEREN);
|
|
pci_write_config(dev, PCIR_COMMAND, val, 2);
|
|
|
|
val = pci_read_config(dev, PCIR_CACHELNSZ, 1);
|
|
if (val != 0x10) {
|
|
pci_write_config(dev, PCIR_CACHELNSZ, 0x10, 1);
|
|
}
|
|
|
|
/*
|
|
* get revision
|
|
*/
|
|
sc->revision = pci_read_config(dev, PCIR_CLASS, 1);
|
|
|
|
/*
|
|
* Map control/status registers.
|
|
*/
|
|
rid = WX_MMBA;
|
|
sc->w.mem = bus_alloc_resource(dev, SYS_RES_MEMORY,
|
|
&rid, 0, ~0, 1, RF_ACTIVE);
|
|
if (!sc->w.mem) {
|
|
device_printf(dev, "could not map memory\n");
|
|
error = ENXIO;
|
|
goto out;
|
|
}
|
|
sc->w.st = rman_get_bustag(sc->w.mem);
|
|
sc->w.sh = rman_get_bushandle(sc->w.mem);
|
|
|
|
rid = 0;
|
|
sc->w.irq = bus_alloc_resource(dev, SYS_RES_IRQ,
|
|
&rid, 0, ~0, 1, RF_SHAREABLE | RF_ACTIVE);
|
|
if (sc->w.irq == NULL) {
|
|
device_printf(dev, "could not map interrupt\n");
|
|
error = ENXIO;
|
|
goto out;
|
|
}
|
|
error = bus_setup_intr(dev, sc->w.irq, INTR_TYPE_NET,
|
|
(void (*)(void *))wx_intr, sc, &sc->w.ih);
|
|
if (error) {
|
|
device_printf(dev, "could not setup irq\n");
|
|
goto out;
|
|
}
|
|
if (wx_attach_common(sc)) {
|
|
bus_teardown_intr(dev, sc->w.irq, sc->w.ih);
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->w.irq);
|
|
bus_release_resource(dev, SYS_RES_MEMORY, WX_MMBA, sc->w.mem);
|
|
error = ENXIO;
|
|
goto out;
|
|
}
|
|
device_printf(dev, "Ethernet address %02x:%02x:%02x:%02x:%02x:%02x\n",
|
|
sc->w.arpcom.ac_enaddr[0], sc->w.arpcom.ac_enaddr[1],
|
|
sc->w.arpcom.ac_enaddr[2], sc->w.arpcom.ac_enaddr[3],
|
|
sc->w.arpcom.ac_enaddr[4], sc->w.arpcom.ac_enaddr[5]);
|
|
(void) snprintf(sc->wx_name, sizeof (sc->wx_name) - 1, "wx%d",
|
|
device_get_unit(dev));
|
|
ifp = &sc->w.arpcom.ac_if;
|
|
ifp->if_unit = device_get_unit(dev);
|
|
ifp->if_name = "wx";
|
|
ifp->if_mtu = WX_MAXMTU;
|
|
ifp->if_output = ether_output;
|
|
ifp->if_baudrate = 1000000000;
|
|
ifp->if_init = (void (*)(void *))wx_init;
|
|
ifp->if_softc = sc;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = wx_ioctl;
|
|
ifp->if_start = wx_start;
|
|
ifp->if_watchdog = wx_watchdog;
|
|
if_attach(ifp);
|
|
ifp->if_snd.ifq_maxlen = WX_MAX_TDESC - 1;
|
|
ether_ifattach(ifp);
|
|
bpfattach(ifp, DLT_EN10MB, sizeof(struct ether_header));
|
|
tmp = wxlist;
|
|
if (tmp) {
|
|
while (tmp->wx_next)
|
|
tmp = tmp->wx_next;
|
|
tmp->wx_next = sc;
|
|
} else {
|
|
wxlist = sc;
|
|
}
|
|
out:
|
|
splx(s);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
wx_detach(device_t dev)
|
|
{
|
|
wx_softc_t *sc = device_get_softc(dev);
|
|
int s = splimp();
|
|
if_detach(&sc->w.arpcom.ac_if);
|
|
wx_stop(sc);
|
|
bus_teardown_intr(dev, sc->w.irq, sc->w.ih);
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->w.irq);
|
|
bus_release_resource(dev, SYS_RES_MEMORY, WX_MMBA, sc->w.mem);
|
|
splx(s);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
wx_shutdown(device_t dev)
|
|
{
|
|
wx_hw_stop((wx_softc_t *) device_get_softc(dev));
|
|
return (0);
|
|
}
|
|
|
|
static INLINE void
|
|
wx_mwi_whackon(sc)
|
|
wx_softc_t *sc;
|
|
{
|
|
sc->wx_cmdw = pci_read_config(sc->w.dev, PCIR_COMMAND, 2);
|
|
pci_write_config(sc->w.dev, PCIR_COMMAND, sc->wx_cmdw & ~MWI, 2);
|
|
}
|
|
|
|
static INLINE void
|
|
wx_mwi_unwhack(sc)
|
|
wx_softc_t *sc;
|
|
{
|
|
if (sc->wx_cmdw & MWI) {
|
|
pci_write_config(sc->w.dev, PCIR_COMMAND, sc->wx_cmdw, 2);
|
|
}
|
|
}
|
|
|
|
static int
|
|
wx_dring_setup(sc)
|
|
wx_softc_t *sc;
|
|
{
|
|
size_t len;
|
|
|
|
len = sizeof (wxrd_t) * WX_MAX_RDESC;
|
|
sc->rdescriptors = (wxrd_t *)
|
|
contigmalloc(len, M_DEVBUF, M_NOWAIT, 0, ~0, 4096, 0);
|
|
if (sc->rdescriptors == NULL) {
|
|
printf("%s: could not allocate rcv descriptors\n", sc->wx_name);
|
|
return (-1);
|
|
}
|
|
if (((u_long)sc->rdescriptors) & 0xfff) {
|
|
printf("%s: rcv descriptors not 4KB aligned\n", sc->wx_name);
|
|
return (-1);
|
|
}
|
|
bzero(sc->rdescriptors, len);
|
|
|
|
len = sizeof (wxtd_t) * WX_MAX_TDESC;
|
|
sc->tdescriptors = (wxtd_t *)
|
|
contigmalloc(len, M_DEVBUF, M_NOWAIT, 0, ~0, 4096, 0);
|
|
if (sc->tdescriptors == NULL) {
|
|
printf("%s: could not allocate xmt descriptors\n", sc->wx_name);
|
|
return (-1);
|
|
}
|
|
if (((u_long)sc->tdescriptors) & 0xfff) {
|
|
printf("%s: xmt descriptors not 4KB aligned\n", sc->wx_name);
|
|
return (-1);
|
|
}
|
|
bzero(sc->tdescriptors, len);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
wx_dring_teardown(sc)
|
|
wx_softc_t *sc;
|
|
{
|
|
if (sc->rdescriptors) {
|
|
WXFREE(sc->rdescriptors);
|
|
sc->rdescriptors = NULL;
|
|
}
|
|
if (sc->tdescriptors) {
|
|
WXFREE(sc->tdescriptors);
|
|
sc->tdescriptors = NULL;
|
|
}
|
|
}
|
|
|
|
static device_method_t wx_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, wx_probe),
|
|
DEVMETHOD(device_attach, wx_attach),
|
|
DEVMETHOD(device_detach, wx_detach),
|
|
DEVMETHOD(device_shutdown, wx_shutdown),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t wx_driver = {
|
|
"wx", wx_methods, sizeof(wx_softc_t),
|
|
};
|
|
static devclass_t wx_devclass;
|
|
DRIVER_MODULE(if_wx, pci, wx_driver, wx_devclass, 0, 0);
|
|
|
|
#endif
|
|
|
|
/*
|
|
* Do generic parts of attach. Our registers have been mapped
|
|
* and our interrupt registered.
|
|
*/
|
|
static int
|
|
wx_attach_common(sc)
|
|
wx_softc_t *sc;
|
|
{
|
|
size_t len;
|
|
u_int32_t tmp;
|
|
int ll = 0;
|
|
|
|
/*
|
|
* First, reset the chip.
|
|
*/
|
|
wx_hw_stop(sc);
|
|
|
|
/*
|
|
* Second, validate our EEPROM.
|
|
*/
|
|
|
|
/* TBD */
|
|
|
|
/*
|
|
* Third, read eeprom for our MAC address and other things.
|
|
*/
|
|
wx_read_eeprom(sc, (u_int16_t *)sc->wx_enaddr, WX_EEPROM_MAC_OFF, 3);
|
|
|
|
/*
|
|
* Fourth, establish some adapter parameters.
|
|
*/
|
|
sc->wx_txint_delay = 128;
|
|
ifmedia_init(&sc->wx_media, IFM_IMASK, wx_ifmedia_upd, wx_ifmedia_sts);
|
|
ifmedia_add(&sc->wx_media, IFM_ETHER|IFM_1000_SX, 0, NULL);
|
|
ifmedia_add(&sc->wx_media, IFM_ETHER|IFM_1000_SX|IFM_FDX, 0, NULL);
|
|
ifmedia_set(&sc->wx_media, IFM_ETHER|IFM_1000_SX|IFM_FDX);
|
|
sc->wx_media.ifm_media = sc->wx_media.ifm_cur->ifm_media;
|
|
ll += 1;
|
|
|
|
/*
|
|
* Fifth, establish a default device control register word.
|
|
*/
|
|
sc->wx_dcr = 0;
|
|
if (sc->wx_cfg1 & WX_EEPROM_CTLR1_FD)
|
|
sc->wx_dcr |= WXDCR_FD;
|
|
if (sc->wx_cfg1 & WX_EEPROM_CTLR1_ILOS)
|
|
sc->wx_dcr |= WXDCR_ILOS;
|
|
|
|
tmp = (sc->wx_cfg1 >> WX_EEPROM_CTLR1_SWDPIO_SHIFT) & WXDCR_SWDPIO_MASK;
|
|
sc->wx_dcr |= (tmp << WXDCR_SWDPIO_SHIFT);
|
|
|
|
if (sc->wx_no_ilos)
|
|
sc->wx_dcr &= ~WXDCR_ILOS;
|
|
if (sc->wx_ilos)
|
|
sc->wx_dcr |= WXDCR_ILOS;
|
|
if (sc->wx_no_flow == 0)
|
|
sc->wx_dcr |= WXDCR_RFCE | WXDCR_TFCE;
|
|
|
|
|
|
/*
|
|
* Sixth, allocate various sw structures...
|
|
*/
|
|
len = sizeof (rxpkt_t) * WX_MAX_RDESC;
|
|
sc->rbase = (rxpkt_t *) WXMALLOC(len);
|
|
if (sc->rbase == NULL) {
|
|
goto fail;
|
|
}
|
|
bzero(sc->rbase, len);
|
|
ll += 1;
|
|
|
|
len = sizeof (txpkt_t) * WX_MAX_TDESC;
|
|
sc->tbase = (txpkt_t *) WXMALLOC(len);
|
|
if (sc->tbase == NULL) {
|
|
goto fail;
|
|
}
|
|
bzero(sc->tbase, len);
|
|
ll += 1;
|
|
|
|
/*
|
|
* Seventh, allocate and dma map (platform dependent) descriptor rings.
|
|
* They have to be aligned on a 4KB boundary.
|
|
*/
|
|
if (wx_dring_setup(sc) == 0) {
|
|
return (0);
|
|
}
|
|
|
|
fail:
|
|
printf("%s: failed to do common attach (%d)\n", sc->wx_name, ll);
|
|
wx_dring_teardown(sc);
|
|
if (sc->rbase) {
|
|
WXFREE(sc->rbase);
|
|
sc->rbase = NULL;
|
|
}
|
|
if (sc->tbase) {
|
|
WXFREE(sc->tbase);
|
|
sc->tbase = NULL;
|
|
}
|
|
return (ENOMEM);
|
|
}
|
|
|
|
/*
|
|
* EEPROM functions.
|
|
*/
|
|
|
|
static INLINE void
|
|
wx_eeprom_raise_clk(sc, regval)
|
|
wx_softc_t *sc;
|
|
u_int32_t regval;
|
|
{
|
|
WRITE_CSR(sc, WXREG_EECDR, regval | WXEECD_SK);
|
|
DELAY(50);
|
|
}
|
|
|
|
static INLINE void
|
|
wx_eeprom_lower_clk(sc, regval)
|
|
wx_softc_t *sc;
|
|
u_int32_t regval;
|
|
{
|
|
WRITE_CSR(sc, WXREG_EECDR, regval & ~WXEECD_SK);
|
|
DELAY(50);
|
|
}
|
|
|
|
static INLINE void
|
|
wx_eeprom_sobits(sc, data, count)
|
|
wx_softc_t *sc;
|
|
u_int16_t data;
|
|
u_int16_t count;
|
|
{
|
|
u_int32_t regval, mask;
|
|
|
|
mask = 1 << (count - 1);
|
|
regval = READ_CSR(sc, WXREG_EECDR) & ~(WXEECD_DI|WXEECD_DO);
|
|
|
|
do {
|
|
if (data & mask)
|
|
regval |= WXEECD_DI;
|
|
else
|
|
regval &= ~WXEECD_DI;
|
|
WRITE_CSR(sc, WXREG_EECDR, regval); DELAY(50);
|
|
wx_eeprom_raise_clk(sc, regval);
|
|
wx_eeprom_lower_clk(sc, regval);
|
|
mask >>= 1;
|
|
} while (mask != 0);
|
|
WRITE_CSR(sc, WXREG_EECDR, regval & ~WXEECD_DI);
|
|
}
|
|
|
|
|
|
static INLINE u_int16_t
|
|
wx_eeprom_sibits(sc)
|
|
wx_softc_t *sc;
|
|
{
|
|
unsigned int regval, i;
|
|
u_int16_t data;
|
|
|
|
data = 0;
|
|
regval = READ_CSR(sc, WXREG_EECDR) & ~(WXEECD_DI|WXEECD_DO);
|
|
for (i = 0; i != 16; i++) {
|
|
data <<= 1;
|
|
wx_eeprom_raise_clk(sc, regval);
|
|
regval = READ_CSR(sc, WXREG_EECDR) & ~WXEECD_DI;
|
|
if (regval & WXEECD_DO) {
|
|
data |= 1;
|
|
}
|
|
wx_eeprom_lower_clk(sc, regval);
|
|
}
|
|
return (data);
|
|
}
|
|
|
|
|
|
|
|
static INLINE void
|
|
wx_eeprom_cleanup(sc)
|
|
wx_softc_t *sc;
|
|
{
|
|
u_int32_t regval;
|
|
regval = READ_CSR(sc, WXREG_EECDR) & ~(WXEECD_DI|WXEECD_CS);
|
|
WRITE_CSR(sc, WXREG_EECDR, regval); DELAY(50);
|
|
wx_eeprom_raise_clk(sc, regval);
|
|
wx_eeprom_lower_clk(sc, regval);
|
|
}
|
|
|
|
static u_int16_t INLINE
|
|
wx_read_eeprom_word(sc, offset)
|
|
wx_softc_t *sc;
|
|
int offset;
|
|
{
|
|
u_int16_t data;
|
|
WRITE_CSR(sc, WXREG_EECDR, WXEECD_CS);
|
|
wx_eeprom_sobits(sc, EEPROM_READ_OPCODE, 3);
|
|
wx_eeprom_sobits(sc, offset, 6);
|
|
data = wx_eeprom_sibits(sc);
|
|
wx_eeprom_cleanup(sc);
|
|
return (data);
|
|
}
|
|
|
|
static void
|
|
wx_read_eeprom(sc, data, offset, words)
|
|
wx_softc_t *sc;
|
|
u_int16_t *data;
|
|
int offset;
|
|
int words;
|
|
{
|
|
int i;
|
|
for (i = 0; i < words; i++) {
|
|
*data++ = wx_read_eeprom_word(sc, offset++);
|
|
}
|
|
sc->wx_cfg1 = wx_read_eeprom_word(sc, WX_EEPROM_CTLR1_OFF);
|
|
}
|
|
|
|
/*
|
|
* Start packet transmission on the interface.
|
|
*/
|
|
|
|
static void
|
|
wx_start(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
wx_softc_t *sc = SOFTC_IFP(ifp);
|
|
u_int16_t cidx, nactv;
|
|
|
|
nactv = sc->tactive;
|
|
while (nactv < WX_MAX_TDESC) {
|
|
int ndesc;
|
|
int gctried = 0;
|
|
struct mbuf *m, *mb_head;
|
|
|
|
IF_DEQUEUE(&ifp->if_snd, mb_head);
|
|
if (mb_head == NULL) {
|
|
break;
|
|
}
|
|
sc->wx_xmitwanted++;
|
|
|
|
/*
|
|
* If we have a packet less than ethermin, pad it out.
|
|
*/
|
|
if (mb_head->m_pkthdr.len < WX_MIN_RPKT_SIZE) {
|
|
MGETHDR(m, M_DONTWAIT, MT_DATA);
|
|
if (m == NULL) {
|
|
m_freem(mb_head);
|
|
break;
|
|
}
|
|
m_copydata(mb_head, 0, mb_head->m_pkthdr.len,
|
|
mtod(m, caddr_t));
|
|
m->m_pkthdr.len = m->m_len = WX_MIN_RPKT_SIZE;
|
|
bzero(mtod(m, char *) + mb_head->m_pkthdr.len,
|
|
WX_MIN_RPKT_SIZE - mb_head->m_pkthdr.len);
|
|
sc->wx_xmitpullup++;
|
|
m_freem(mb_head);
|
|
mb_head = m;
|
|
}
|
|
again:
|
|
cidx = sc->tnxtfree;
|
|
nactv = sc->tactive;
|
|
|
|
|
|
/*
|
|
* Go through each of the mbufs in the chain and initialize
|
|
* the transmit buffer descriptors with the physical address
|
|
* and size of that mbuf. If we have a length less than our
|
|
* minimum transmit size, we bail (to do a pullup). If we run
|
|
* out of descriptors, we also bail and try and do a pullup.
|
|
*/
|
|
for (ndesc = 0, m = mb_head; m != NULL; m = m->m_next) {
|
|
vm_offset_t vptr;
|
|
wxtd_t *td;
|
|
|
|
/*
|
|
* If this mbuf has no data, skip it.
|
|
*/
|
|
if (m->m_len == 0) {
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* If this packet is too small for the chip's minimum,
|
|
* break out to to cluster it.
|
|
*/
|
|
if (m->m_len < WX_MIN_RPKT_SIZE) {
|
|
sc->wx_xmitrunt++;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Do we have a descriptor available for this mbuf?
|
|
*/
|
|
if (++nactv == WX_MAX_TDESC) {
|
|
if (gctried++ == 0) {
|
|
sc->wx_xmitgc++;
|
|
wx_gc(sc);
|
|
goto again;
|
|
}
|
|
break;
|
|
}
|
|
sc->tbase[cidx].dptr = m;
|
|
td = &sc->tdescriptors[cidx];
|
|
td->length = m->m_len;
|
|
|
|
vptr = mtod(m, vm_offset_t);
|
|
td->address.highpart = 0;
|
|
td->address.lowpart = vtophys(vptr);
|
|
|
|
td->cso = 0;
|
|
td->status = 0;
|
|
td->special = 0;
|
|
td->cmd = 0;
|
|
td->css = 0;
|
|
|
|
if (sc->wx_debug) {
|
|
printf("%s: XMIT[%d] %p vptr %lx (length %d "
|
|
"DMA addr %x) idx %d\n", sc->wx_name,
|
|
ndesc, m, (long) vptr, td->length,
|
|
td->address.lowpart, cidx);
|
|
}
|
|
ndesc++;
|
|
cidx = T_NXT_IDX(cidx);
|
|
}
|
|
|
|
/*
|
|
* If we get here and m is NULL, we can send
|
|
* the the packet chain described by mb_head.
|
|
*/
|
|
if (m == NULL) {
|
|
/*
|
|
* Mark the last descriptor with EOP and tell the
|
|
* chip to insert a final checksum.
|
|
*/
|
|
wxtd_t *td = &sc->tdescriptors[T_PREV_IDX(cidx)];
|
|
td->cmd = TXCMD_EOP|TXCMD_IFCS;
|
|
|
|
sc->tbase[sc->tnxtfree].sidx = sc->tnxtfree;
|
|
sc->tbase[sc->tnxtfree].eidx = cidx;
|
|
sc->tbase[sc->tnxtfree].next = NULL;
|
|
if (sc->tbsyf) {
|
|
sc->tbsyl->next = &sc->tbase[sc->tnxtfree];
|
|
} else {
|
|
sc->tbsyf = &sc->tbase[sc->tnxtfree];
|
|
}
|
|
sc->tbsyl = &sc->tbase[sc->tnxtfree];
|
|
sc->tnxtfree = cidx;
|
|
sc->tactive = nactv;
|
|
ifp->if_timer = 10;
|
|
WRITE_CSR(sc, WXREG_TDT, cidx);
|
|
if (ifp->if_bpf)
|
|
bpf_mtap(WX_BPFTAP_ARG(ifp), mb_head);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* Otherwise, we couldn't send this packet for some reason.
|
|
*
|
|
* If don't have a descriptor available, and this is a
|
|
* single mbuf packet, freeze output so that later we
|
|
* can restart when we have more room. Otherwise, we'll
|
|
* try and cluster the request. We've already tried to
|
|
* garbage collect completed descriptors.
|
|
*/
|
|
if (nactv == WX_MAX_TDESC && mb_head->m_next == NULL) {
|
|
sc->wx_xmitputback++;
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
IF_PREPEND(&ifp->if_snd, mb_head);
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Otherwise, it's either a fragment length somewhere in the
|
|
* chain that isn't at least WX_MIN_XPKT_SIZE in length or
|
|
* the number of fragments exceeds the number of descriptors
|
|
* available.
|
|
*
|
|
* We could try a variety of strategies here- if this is
|
|
* a length problem for single mbuf packet or a length problem
|
|
* for the last mbuf in a chain (we could just try and adjust
|
|
* it), but it's just simpler to try and cluster it.
|
|
*/
|
|
MGETHDR(m, M_DONTWAIT, MT_DATA);
|
|
if (m == NULL) {
|
|
m_freem(mb_head);
|
|
break;
|
|
}
|
|
MCLGET(m, M_DONTWAIT);
|
|
if ((m->m_flags & M_EXT) == 0) {
|
|
m_freem(m);
|
|
m_freem(mb_head);
|
|
break;
|
|
}
|
|
m_copydata(mb_head, 0, mb_head->m_pkthdr.len, mtod(m, caddr_t));
|
|
m->m_pkthdr.len = m->m_len = mb_head->m_pkthdr.len;
|
|
m_freem(mb_head);
|
|
mb_head = m;
|
|
sc->wx_xmitcluster++;
|
|
goto again;
|
|
}
|
|
|
|
if (sc->tactive == WX_MAX_TDESC) {
|
|
sc->wx_xmitblocked++;
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Process interface interrupts.
|
|
*/
|
|
static int
|
|
wx_intr(arg)
|
|
void *arg;
|
|
{
|
|
wx_softc_t *sc = arg;
|
|
int claimed = 0;
|
|
|
|
/*
|
|
* Read interrupt cause register. Reading it clears bits.
|
|
*/
|
|
sc->wx_icr = READ_CSR(sc, WXREG_ICR);
|
|
if (sc->wx_icr) {
|
|
claimed++;
|
|
WX_DISABLE_INT(sc);
|
|
sc->wx_intr++;
|
|
if (sc->wx_icr & (WXISR_LSC|WXISR_RXSEQ)) {
|
|
wx_handle_link_intr(sc);
|
|
}
|
|
wx_handle_rxint(sc);
|
|
if (sc->tactive) {
|
|
wx_gc(sc);
|
|
}
|
|
if (sc->wx_if.if_snd.ifq_head != NULL) {
|
|
wx_start(&sc->wx_if);
|
|
}
|
|
WX_ENABLE_INT(sc);
|
|
}
|
|
return (claimed);
|
|
}
|
|
|
|
static void
|
|
wx_handle_link_intr(sc)
|
|
wx_softc_t *sc;
|
|
{
|
|
sc->wx_linkintr++;
|
|
printf("%s: link intr 0x%x\n", sc->wx_name, sc->wx_icr);
|
|
}
|
|
|
|
static void
|
|
wx_handle_rxint(sc)
|
|
wx_softc_t *sc;
|
|
{
|
|
struct ether_header *eh;
|
|
struct mbuf *m0, *mb, *pending[WX_MAX_RDESC];
|
|
struct ifnet *ifp = &sc->wx_if;
|
|
int npkts, ndesc, lidx, idx, tlen;
|
|
|
|
for (m0 = sc->rpending, tlen = ndesc = npkts = 0, idx = sc->rnxt,
|
|
lidx = R_PREV_IDX(idx); ndesc < WX_MAX_RDESC;
|
|
ndesc++, lidx = idx, idx = R_NXT_IDX(idx)) {
|
|
wxrd_t *rd;
|
|
rxpkt_t *rxpkt;
|
|
int length, offset, lastframe;
|
|
|
|
rd = &sc->rdescriptors[idx];
|
|
if ((rd->status & RDSTAT_DD) == 0) {
|
|
if (m0) {
|
|
if (sc->rpending == NULL) {
|
|
m0->m_pkthdr.len = tlen;
|
|
sc->rpending = m0;
|
|
} else {
|
|
m_freem(m0);
|
|
}
|
|
m0 = NULL;
|
|
}
|
|
if (sc->wx_debug) {
|
|
printf("WXRX: ndesc %d idx %d lidx %d\n",
|
|
ndesc, idx, lidx);
|
|
}
|
|
break;
|
|
}
|
|
|
|
if (rd->errors != 0) {
|
|
printf("%s: packet with errors (%x)\n",
|
|
sc->wx_name, rd->errors);
|
|
rd->status = 0;
|
|
ifp->if_ierrors++;
|
|
if (m0) {
|
|
m_freem(m0);
|
|
m0 = NULL;
|
|
if (sc->rpending) {
|
|
m_freem(sc->rpending);
|
|
sc->rpending = NULL;
|
|
}
|
|
}
|
|
continue;
|
|
}
|
|
|
|
|
|
rxpkt = &sc->rbase[idx];
|
|
mb = rxpkt->dptr;
|
|
if (mb == NULL) {
|
|
printf("%s: receive descriptor with no mbuf\n",
|
|
sc->wx_name);
|
|
(void) wx_get_rbuf(sc, rxpkt);
|
|
rd->status = 0;
|
|
ifp->if_ierrors++;
|
|
if (m0) {
|
|
m_freem(m0);
|
|
m0 = NULL;
|
|
if (sc->rpending) {
|
|
m_freem(sc->rpending);
|
|
sc->rpending = NULL;
|
|
}
|
|
}
|
|
continue;
|
|
}
|
|
|
|
/* XXX: Flush DMA for rxpkt */
|
|
|
|
if (wx_get_rbuf(sc, rxpkt)) {
|
|
sc->wx_rxnobuf++;
|
|
wx_rxdma_map(sc, rxpkt, mb);
|
|
ifp->if_ierrors++;
|
|
rd->status = 0;
|
|
if (m0) {
|
|
m_freem(m0);
|
|
m0 = NULL;
|
|
if (sc->rpending) {
|
|
m_freem(sc->rpending);
|
|
sc->rpending = NULL;
|
|
}
|
|
}
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* Save the completing packet's offset value and length
|
|
* and install the new one into the descriptor.
|
|
*/
|
|
lastframe = (rd->status & RDSTAT_EOP) != 0;
|
|
length = rd->length;
|
|
offset = rd->address.lowpart & 0xff;
|
|
bzero (rd, sizeof (*rd));
|
|
rd->address.lowpart = rxpkt->dma_addr + WX_RX_OFFSET_VALUE;
|
|
|
|
mb->m_len = length;
|
|
mb->m_data += offset;
|
|
mb->m_next = NULL;
|
|
if (m0 == NULL) {
|
|
m0 = mb;
|
|
tlen = length;
|
|
} else if (m0 == sc->rpending) {
|
|
/*
|
|
* Pick up where we left off before. If
|
|
* we have an offset (we're assuming the
|
|
* first frame has an offset), then we've
|
|
* lost sync somewhere along the line.
|
|
*/
|
|
if (offset) {
|
|
printf("%s: lost sync with partial packet\n",
|
|
sc->wx_name);
|
|
m_freem(sc->rpending);
|
|
sc->rpending = NULL;
|
|
m0 = mb;
|
|
tlen = length;
|
|
} else {
|
|
sc->rpending = NULL;
|
|
tlen = m0->m_pkthdr.len;
|
|
}
|
|
} else {
|
|
tlen += length;
|
|
}
|
|
|
|
if (sc->wx_debug) {
|
|
printf("%s: RDESC[%d] len %d off %d lastframe %d\n",
|
|
sc->wx_name, idx, mb->m_len, offset, lastframe);
|
|
}
|
|
if (m0 != mb)
|
|
m_cat(m0, mb);
|
|
if (lastframe == 0) {
|
|
continue;
|
|
}
|
|
m0->m_pkthdr.rcvif = ifp;
|
|
m0->m_pkthdr.len = tlen - WX_CRC_LENGTH;
|
|
mb->m_len -= WX_CRC_LENGTH;
|
|
|
|
eh = mtod(m0, struct ether_header *);
|
|
if ((ifp->if_flags & IFF_PROMISC) &&
|
|
(bcmp(eh->ether_dhost, sc->wx_enaddr, ETHER_ADDR_LEN) &&
|
|
(eh->ether_dhost[0] & 1) == 0)) {
|
|
m_freem(m0);
|
|
if (sc->rpending) {
|
|
m_freem(sc->rpending);
|
|
sc->rpending = NULL;
|
|
}
|
|
} else {
|
|
pending[npkts++] = m0;
|
|
}
|
|
m0 = NULL;
|
|
tlen = 0;
|
|
}
|
|
|
|
if (ndesc) {
|
|
WRITE_CSR(sc, WXREG_RDT0, lidx);
|
|
sc->rnxt = idx;
|
|
}
|
|
|
|
if (npkts) {
|
|
sc->wx_rxintr++;
|
|
}
|
|
|
|
for (idx = 0; idx < npkts; idx++) {
|
|
mb = pending[idx];
|
|
#ifndef __FreeBSD__
|
|
if (ifp->if_bpf) {
|
|
bpf_mtap(WX_BPFTAP_ARG(ifp), mb);
|
|
}
|
|
#endif
|
|
ifp->if_ipackets++;
|
|
if (sc->wx_debug) {
|
|
printf("%s: RECV packet length %d\n",
|
|
sc->wx_name, mb->m_pkthdr.len);
|
|
}
|
|
#ifdef __FreeBSD__
|
|
eh = mtod(mb, struct ether_header *);
|
|
m_adj(mb, sizeof (struct ether_header));
|
|
ether_input(ifp, eh, mb);
|
|
#else
|
|
(*ifp->if_input)(ifp, mb);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
static void
|
|
wx_gc(sc)
|
|
wx_softc_t *sc;
|
|
{
|
|
struct ifnet *ifp = &sc->wx_if;
|
|
txpkt_t *txpkt = sc->tbsyf;
|
|
u_int32_t tdh = READ_CSR(sc, WXREG_TDH);
|
|
int s;
|
|
|
|
s = splimp();
|
|
while (txpkt != NULL) {
|
|
u_int32_t end = txpkt->eidx, cidx = tdh;
|
|
|
|
/*
|
|
* Normalize start..end indices to 2 *
|
|
* WX_MAX_TDESC range to eliminate wrap.
|
|
*/
|
|
if (txpkt->eidx < txpkt->sidx) {
|
|
end += WX_MAX_TDESC;
|
|
}
|
|
|
|
/*
|
|
* Normalize current chip index to 2 *
|
|
* WX_MAX_TDESC range to eliminate wrap.
|
|
*/
|
|
if (cidx < txpkt->sidx) {
|
|
cidx += WX_MAX_TDESC;
|
|
}
|
|
|
|
/*
|
|
* If the current chip index is between low and
|
|
* high indices for this packet, it's not finished
|
|
* transmitting yet. Because transmits are done FIFO,
|
|
* this means we're done garbage collecting too.
|
|
*/
|
|
|
|
if (txpkt->sidx <= cidx && cidx < txpkt->eidx) {
|
|
if (sc->wx_debug) {
|
|
printf("%s: TXGC %d..%d TDH %d\n", sc->wx_name,
|
|
txpkt->sidx, txpkt->eidx, tdh);
|
|
}
|
|
break;
|
|
}
|
|
ifp->if_opackets++;
|
|
|
|
if (txpkt->dptr) {
|
|
(void) m_freem(txpkt->dptr);
|
|
} else {
|
|
printf("%s: null mbuf in gc\n", sc->wx_name);
|
|
}
|
|
|
|
for (cidx = txpkt->sidx; cidx != txpkt->eidx;
|
|
cidx = T_NXT_IDX(cidx)) {
|
|
txpkt_t *tmp;
|
|
wxtd_t *td;
|
|
|
|
td = &sc->tdescriptors[cidx];
|
|
if (td->status & TXSTS_EC) {
|
|
printf("%s: excess collisions\n", sc->wx_name);
|
|
ifp->if_collisions++;
|
|
ifp->if_oerrors++;
|
|
}
|
|
if (td->status & TXSTS_LC) {
|
|
printf("%s: lost carrier\n", sc->wx_name);
|
|
ifp->if_oerrors++;
|
|
}
|
|
tmp = &sc->tbase[cidx];
|
|
if (sc->wx_debug) {
|
|
printf("%s: TXGC[%d] %p %d..%d done nact %d "
|
|
"TDH %d\n", sc->wx_name, cidx, tmp->dptr,
|
|
txpkt->sidx, txpkt->eidx, sc->tactive, tdh);
|
|
}
|
|
tmp->dptr = NULL;
|
|
if (sc->tactive == 0) {
|
|
printf("%s: nactive < 0?\n", sc->wx_name);
|
|
} else {
|
|
sc->tactive -= 1;
|
|
}
|
|
bzero(td, sizeof (*td));
|
|
}
|
|
sc->tbsyf = txpkt->next;
|
|
txpkt = sc->tbsyf;
|
|
}
|
|
if (sc->tactive < WX_MAX_TDESC) {
|
|
ifp->if_timer = 0;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
}
|
|
splx(s);
|
|
}
|
|
|
|
/*
|
|
* Update packet in/out/collision statistics.
|
|
*/
|
|
static void
|
|
wx_stats_update(arg)
|
|
void *arg;
|
|
{
|
|
wx_softc_t *sc = arg;
|
|
int s;
|
|
|
|
s = splimp();
|
|
wx_gc(sc);
|
|
splx(s);
|
|
|
|
/*
|
|
* Schedule another timeout one second from now.
|
|
*/
|
|
TIMEOUT(sc, wx_stats_update, sc, hz);
|
|
}
|
|
|
|
/*
|
|
* Stop and reinitialize the hardware
|
|
*/
|
|
static void
|
|
wx_hw_stop(sc)
|
|
wx_softc_t *sc;
|
|
{
|
|
u_int32_t icr;
|
|
if (sc->revision == 2) {
|
|
wx_mwi_whackon(sc);
|
|
}
|
|
WRITE_CSR(sc, WXREG_DCR, WXDCR_RST);
|
|
DELAY(20 * 1000);
|
|
WRITE_CSR(sc, WXREG_IMASK, ~0);
|
|
icr = READ_CSR(sc, WXREG_ICR);
|
|
if (sc->revision == 2) {
|
|
wx_mwi_unwhack(sc);
|
|
}
|
|
WX_DISABLE_INT(sc);
|
|
}
|
|
|
|
static void
|
|
wx_set_addr(sc, idx, mac)
|
|
wx_softc_t *sc;
|
|
int idx;
|
|
u_int8_t *mac;
|
|
{
|
|
u_int32_t t0, t1;
|
|
t0 = (mac[0]) | (mac[1] << 8) | (mac[2] << 16) | (mac[3] << 24);
|
|
t1 = (mac[4] << 0) | (mac[5] << 8);
|
|
t1 |= WX_RAL_AV;
|
|
WRITE_CSR(sc, WXREG_RAL_LO(idx), t0);
|
|
WRITE_CSR(sc, WXREG_RAL_HI(idx), t1);
|
|
}
|
|
|
|
static int
|
|
wx_hw_initialize(sc)
|
|
wx_softc_t *sc;
|
|
{
|
|
int i;
|
|
|
|
WRITE_CSR(sc, WXREG_VET, 0);
|
|
for (i = 0; i < (WX_VLAN_TAB_SIZE << 2); i += 4) {
|
|
WRITE_CSR(sc, (WXREG_VFTA + i), 0);
|
|
}
|
|
if (sc->revision == 2) {
|
|
wx_mwi_whackon(sc);
|
|
WRITE_CSR(sc, WXREG_RCTL, WXRCTL_RST);
|
|
DELAY(5 * 1000);
|
|
}
|
|
/*
|
|
* Load the first receiver address with our MAC address,
|
|
* and load as many multicast addresses as can fit into
|
|
* the receive address array.
|
|
*/
|
|
wx_set_addr(sc, 0, sc->wx_enaddr);
|
|
for (i = 1; i <= sc->wx_nmca; i++) {
|
|
if (i >= WX_RAL_TAB_SIZE) {
|
|
break;
|
|
} else {
|
|
wx_set_addr(sc, i, sc->wx_mcaddr[i-1]);
|
|
}
|
|
}
|
|
|
|
while (i < WX_RAL_TAB_SIZE) {
|
|
WRITE_CSR(sc, WXREG_RAL_LO(i), 0);
|
|
WRITE_CSR(sc, WXREG_RAL_HI(i), 0);
|
|
i++;
|
|
}
|
|
|
|
if (sc->revision == 2) {
|
|
WRITE_CSR(sc, WXREG_RCTL, 0);
|
|
DELAY(1 * 1000);
|
|
wx_mwi_unwhack(sc);
|
|
}
|
|
|
|
/*
|
|
* Clear out the hashed multicast table array.
|
|
*/
|
|
for (i = 0; i < WX_MC_TAB_SIZE; i++) {
|
|
WRITE_CSR(sc, WXREG_MTA + (sizeof (u_int32_t) * 4), 0);
|
|
}
|
|
if (sc->wx_dcr & (WXDCR_RFCE|WXDCR_TFCE)) {
|
|
WRITE_CSR(sc, WXREG_FCAL, FC_FRM_CONST_LO);
|
|
WRITE_CSR(sc, WXREG_FCAH, FC_FRM_CONST_HI);
|
|
WRITE_CSR(sc, WXREG_FCT, FC_TYP_CONST);
|
|
} else {
|
|
WRITE_CSR(sc, WXREG_FCAL, 0);
|
|
WRITE_CSR(sc, WXREG_FCAH, 0);
|
|
WRITE_CSR(sc, WXREG_FCT, 0);
|
|
}
|
|
WRITE_CSR(sc, WXREG_FLOW_XTIMER, WX_XTIMER_DFLT);
|
|
if (sc->revision == 2) {
|
|
WRITE_CSR(sc, WXREG_FLOW_RCV_HI, 0);
|
|
WRITE_CSR(sc, WXREG_FLOW_RCV_LO, 0);
|
|
} else {
|
|
WRITE_CSR(sc, WXREG_FLOW_RCV_HI, WX_RCV_FLOW_HI_DFLT);
|
|
WRITE_CSR(sc, WXREG_FLOW_RCV_LO, WX_RCV_FLOW_LO_DFLT);
|
|
}
|
|
WRITE_CSR(sc, WXREG_XMIT_CFGW, WXTXCW_DEFAULT);
|
|
WRITE_CSR(sc, WXREG_DCR, sc->wx_dcr);
|
|
DELAY(50 * 1000);
|
|
|
|
/*
|
|
* The pin stuff is all FM from the Linux driver.
|
|
*/
|
|
if ((READ_CSR(sc, WXREG_DCR) & WXDCR_SWDPIN1) == 0) {
|
|
for (i = 0; i < 500; i++) {
|
|
DELAY(10 * 1000);
|
|
if (READ_CSR(sc, WXREG_DSR) & WXDSR_LU) {
|
|
sc->linkup = 1;
|
|
break;
|
|
}
|
|
}
|
|
} else {
|
|
printf("%s: swdpio did not clear\n", sc->wx_name);
|
|
return (-1);
|
|
}
|
|
if (sc->linkup == 0) {
|
|
printf("%s: link never came up\n", sc->wx_name);
|
|
return (-1);
|
|
}
|
|
sc->wx_ienable = WXIENABLE_DEFAULT;
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Stop the interface. Cancels the statistics updater and resets the interface.
|
|
*/
|
|
static void
|
|
wx_stop(sc)
|
|
wx_softc_t *sc;
|
|
{
|
|
txpkt_t *txp;
|
|
rxpkt_t *rxp;
|
|
struct ifnet *ifp = &sc->wx_if;
|
|
|
|
/*
|
|
* Cancel stats updater.
|
|
*/
|
|
UNTIMEOUT(wx_stats_update, sc, sc);
|
|
|
|
/*
|
|
* Reset the chip
|
|
*/
|
|
wx_hw_stop(sc);
|
|
|
|
/*
|
|
* Release any xmit buffers.
|
|
*/
|
|
for (txp = sc->tbase; txp && txp < &sc->tbase[WX_MAX_TDESC]; txp++) {
|
|
if (txp->dptr) {
|
|
m_free(txp->dptr);
|
|
txp->dptr = NULL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Free all the receive buffers.
|
|
*/
|
|
for (rxp = sc->rbase; rxp && rxp < &sc->rbase[WX_MAX_RDESC]; rxp++) {
|
|
if (rxp->dptr) {
|
|
m_free(rxp->dptr);
|
|
rxp->dptr = NULL;
|
|
}
|
|
}
|
|
|
|
if (sc->rpending) {
|
|
m_freem(sc->rpending);
|
|
sc->rpending = NULL;
|
|
}
|
|
|
|
/*
|
|
* And we're outta here...
|
|
*/
|
|
|
|
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
|
|
ifp->if_timer = 0;
|
|
}
|
|
|
|
/*
|
|
* Watchdog/transmission transmit timeout handler.
|
|
*/
|
|
static void
|
|
wx_watchdog(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
wx_softc_t *sc = SOFTC_IFP(ifp);
|
|
printf("%s: device timeout\n", sc->wx_name);
|
|
ifp->if_oerrors++;
|
|
if (wx_init(sc)) {
|
|
printf("%s: could not re-init device\n", sc->wx_name);
|
|
VTIMEOUT(sc, (void (*)(void *))wx_init, sc, hz);
|
|
}
|
|
}
|
|
|
|
static int
|
|
wx_init(xsc)
|
|
void *xsc;
|
|
{
|
|
struct ifmedia *ifm;
|
|
wx_softc_t *sc = xsc;
|
|
struct ifnet *ifp = &sc->wx_if;
|
|
rxpkt_t *rxpkt;
|
|
wxrd_t *rd;
|
|
size_t len;
|
|
int s, i, bflags;
|
|
|
|
s = splimp();
|
|
|
|
/*
|
|
* Cancel any pending I/O by resetting things.
|
|
* wx_stop will free any allocated mbufs.
|
|
*/
|
|
wx_stop(sc);
|
|
|
|
/*
|
|
* Reset the hardware. All network addresses loaded here, but
|
|
* neither the receiver nor the transmitter are enabled.
|
|
*/
|
|
|
|
if (wx_hw_initialize(sc)) {
|
|
return (EIO);
|
|
}
|
|
|
|
/*
|
|
* Set up the receive ring stuff.
|
|
*/
|
|
len = sizeof (wxrd_t) * WX_MAX_RDESC;
|
|
bzero(sc->rdescriptors, len);
|
|
for (rxpkt = sc->rbase, i = 0; rxpkt != NULL && i < WX_MAX_RDESC;
|
|
i += RXINCR, rxpkt++) {
|
|
rd = &sc->rdescriptors[i];
|
|
if (wx_get_rbuf(sc, rxpkt)) {
|
|
break;
|
|
}
|
|
rd->address.lowpart = rxpkt->dma_addr + WX_RX_OFFSET_VALUE;
|
|
}
|
|
if (i != WX_MAX_RDESC) {
|
|
printf("%s: could not set up rbufs\n", sc->wx_name);
|
|
wx_stop(sc);
|
|
return (ENOMEM);
|
|
}
|
|
|
|
/*
|
|
* Set up transmit parameters and enable the transmitter.
|
|
*/
|
|
sc->tnxtfree = sc->tactive = 0;
|
|
sc->tbsyf = sc->tbsyl = NULL;
|
|
WRITE_CSR(sc, WXREG_TCTL, 0);
|
|
DELAY(5 * 1000);
|
|
WRITE_CSR(sc, WXREG_TDBA_LO,
|
|
vtophys((vm_offset_t)&sc->tdescriptors[0]));
|
|
WRITE_CSR(sc, WXREG_TDBA_HI, 0);
|
|
WRITE_CSR(sc, WXREG_TDLEN, WX_MAX_TDESC * sizeof (wxtd_t));
|
|
WRITE_CSR(sc, WXREG_TDH, 0);
|
|
WRITE_CSR(sc, WXREG_TDT, 0);
|
|
WRITE_CSR(sc, WXREG_TQSA_HI, 0);
|
|
WRITE_CSR(sc, WXREG_TQSA_LO, 0);
|
|
WRITE_CSR(sc, WXREG_TIPG, WX_TIPG_DFLT);
|
|
WRITE_CSR(sc, WXREG_TIDV, sc->wx_txint_delay);
|
|
WRITE_CSR(sc, WXREG_TCTL, (WXTCTL_CT(WX_COLLISION_THRESHOLD) |
|
|
WXTCTL_COLD(WX_FDX_COLLISION_DX) | WXTCTL_EN));
|
|
/*
|
|
* Set up receive parameters and enable the receiver.
|
|
*/
|
|
|
|
sc->rnxt = 0;
|
|
WRITE_CSR(sc, WXREG_RCTL, 0);
|
|
DELAY(5 * 1000);
|
|
WRITE_CSR(sc, WXREG_RDTR0, WXRDTR_FPD);
|
|
WRITE_CSR(sc, WXREG_RDBA0_LO,
|
|
vtophys((vm_offset_t)&sc->rdescriptors[0]));
|
|
WRITE_CSR(sc, WXREG_RDBA0_HI, 0);
|
|
WRITE_CSR(sc, WXREG_RDLEN0, WX_MAX_RDESC * sizeof (wxrd_t));
|
|
WRITE_CSR(sc, WXREG_RDH0, 0);
|
|
WRITE_CSR(sc, WXREG_RDT0, (WX_MAX_RDESC - RXINCR));
|
|
WRITE_CSR(sc, WXREG_RDTR1, 0);
|
|
WRITE_CSR(sc, WXREG_RDBA1_LO, 0);
|
|
WRITE_CSR(sc, WXREG_RDBA1_HI, 0);
|
|
WRITE_CSR(sc, WXREG_RDLEN1, 0);
|
|
WRITE_CSR(sc, WXREG_RDH1, 0);
|
|
WRITE_CSR(sc, WXREG_RDT1, 0);
|
|
|
|
if (ifp->if_mtu > ETHERMTU) {
|
|
printf("%s: enabling for jumbo packets\n", sc->wx_name);
|
|
bflags = WXRCTL_EN | WXRCTL_LPE | WXRCTL_2KRBUF;
|
|
} else {
|
|
bflags = WXRCTL_EN | WXRCTL_2KRBUF;
|
|
}
|
|
|
|
WRITE_CSR(sc, WXREG_RCTL, bflags |
|
|
((ifp->if_flags & IFF_BROADCAST) ? WXRCTL_BAM : 0) |
|
|
((ifp->if_flags & IFF_PROMISC) ? WXRCTL_UPE : 0) |
|
|
((sc->all_mcasts) ? WXRCTL_MPE : 0));
|
|
|
|
/*
|
|
* Enable Interrupts
|
|
*/
|
|
WX_ENABLE_INT(sc);
|
|
|
|
/*
|
|
* Mark that we're up and running...
|
|
*/
|
|
ifp->if_flags |= IFF_RUNNING;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
|
|
ifm = &sc->wx_media;
|
|
i = ifm->ifm_media;
|
|
ifm->ifm_media = ifm->ifm_cur->ifm_media;
|
|
wx_ifmedia_upd(ifp);
|
|
ifm->ifm_media = i;
|
|
splx(s);
|
|
|
|
/*
|
|
* Start stats updater.
|
|
*/
|
|
TIMEOUT(sc, wx_stats_update, sc, hz);
|
|
|
|
/*
|
|
* And we're outta here...
|
|
*/
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Get a receive buffer for our use (and dma map the data area).
|
|
*
|
|
* This chip can have buffers be 256, 512, 1024 or 2048 bytes in size.
|
|
* It wants them aligned on 256 byte boundaries, but can actually cope
|
|
* with an offset in the first 255 bytes of the head of a receive frame.
|
|
*
|
|
* We'll allocate a MCLBYTE sized cluster but *not* adjust the data pointer
|
|
* by any alignment value. Instead, we'll tell the chip to offset by any
|
|
* alignment and we'll catch the alignment on the backend at interrupt time.
|
|
*/
|
|
static void
|
|
wx_rxdma_map(sc, rxpkt, mb)
|
|
wx_softc_t *sc;
|
|
rxpkt_t *rxpkt;
|
|
struct mbuf *mb;
|
|
{
|
|
rxpkt->dptr = mb;
|
|
rxpkt->dma_addr = vtophys(mtod(mb, vm_offset_t));
|
|
}
|
|
|
|
static int
|
|
wx_get_rbuf(sc, rxpkt)
|
|
wx_softc_t *sc;
|
|
rxpkt_t *rxpkt;
|
|
{
|
|
struct mbuf *mb;
|
|
MGETHDR(mb, M_DONTWAIT, MT_DATA);
|
|
if (mb == NULL) {
|
|
rxpkt->dptr = NULL;
|
|
return (-1);
|
|
}
|
|
MCLGET(mb, M_DONTWAIT);
|
|
if ((mb->m_flags & M_EXT) == 0) {
|
|
m_freem(mb);
|
|
rxpkt->dptr = NULL;
|
|
return (-1);
|
|
}
|
|
wx_rxdma_map(sc, rxpkt, mb);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
wx_ioctl(ifp, command, data)
|
|
struct ifnet *ifp;
|
|
IOCTL_CMD_TYPE command;
|
|
caddr_t data;
|
|
{
|
|
wx_softc_t *sc = SOFTC_IFP(ifp);
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
int s, error = 0;
|
|
|
|
s = splimp();
|
|
switch (command) {
|
|
case SIOCSIFADDR:
|
|
#if !defined(__NetBSD__)
|
|
case SIOCGIFADDR:
|
|
#endif
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
|
|
#ifdef SIOCGIFMTU
|
|
case SIOCSIFMTU:
|
|
if (ifr->ifr_mtu > WX_MAXMTU || ifr->ifr_mtu < ETHERMIN) {
|
|
error = EINVAL;
|
|
} else if (ifp->if_mtu != ifr->ifr_mtu) {
|
|
ifp->if_mtu = ifr->ifr_mtu;
|
|
error = wx_init(sc);
|
|
}
|
|
break;
|
|
#endif
|
|
|
|
case SIOCSIFFLAGS:
|
|
sc->all_mcasts = (ifp->if_flags & IFF_ALLMULTI) ? 1 : 0;
|
|
|
|
/*
|
|
* If interface is marked up and not running, then start it.
|
|
* If it is marked down and running, stop it.
|
|
* If it's up then re-initialize it. This is so flags
|
|
* such as IFF_PROMISC are handled.
|
|
*/
|
|
if (ifp->if_flags & IFF_UP) {
|
|
error = wx_init(sc);
|
|
} else {
|
|
if (ifp->if_flags & IFF_RUNNING) {
|
|
wx_stop(sc);
|
|
}
|
|
}
|
|
break;
|
|
|
|
#ifdef SIOCADDMULTI
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
#if defined(__NetBSD__)
|
|
{
|
|
int all_mc_change = (sc->all_mcasts ==
|
|
((ifp->if_flags & IFF_ALLMULTI) ? 1 : 0));
|
|
error = (command == SIOCADDMULTI) ?
|
|
ether_addmulti(ifr, &sc->w.ethercom) :
|
|
ether_delmulti(ifr, &sc->w.ethercom);
|
|
if (error != ENETRESET && all_mc_change == 0) {
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
sc->all_mcasts = (ifp->if_flags & IFF_ALLMULTI) ? 1 : 0;
|
|
error = wx_mc_setup(sc);
|
|
break;
|
|
#endif
|
|
#ifdef SIOCGIFMEDIA
|
|
case SIOCGIFMEDIA:
|
|
case SIOCSIFMEDIA:
|
|
error = ifmedia_ioctl(ifp, ifr, &sc->wx_media, command);
|
|
break;
|
|
#endif
|
|
default:
|
|
error = EINVAL;
|
|
}
|
|
|
|
(void) splx(s);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
wx_ifmedia_upd(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct wx_softc *sc = SOFTC_IFP(ifp);
|
|
struct ifmedia *ifm = &sc->wx_media;
|
|
|
|
if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
|
|
return (EINVAL);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
wx_ifmedia_sts(ifp, ifmr)
|
|
struct ifnet *ifp;
|
|
struct ifmediareq *ifmr;
|
|
{
|
|
struct wx_softc *sc = SOFTC_IFP(ifp);
|
|
|
|
ifmr->ifm_status = IFM_AVALID;
|
|
ifmr->ifm_active = IFM_ETHER;
|
|
|
|
if (sc->linkup == 0)
|
|
return;
|
|
|
|
ifmr->ifm_status |= IFM_ACTIVE|IFM_1000_SX;
|
|
if (READ_CSR(sc, WXREG_DSR) & WXDSR_FD)
|
|
ifmr->ifm_active |= IFM_FDX;
|
|
}
|