632 lines
19 KiB
C
632 lines
19 KiB
C
/*
|
|
* Interface to the generic driver for the aic7xxx based adaptec
|
|
* SCSI controllers. This is used to implement product specific
|
|
* probe and attach routines.
|
|
*
|
|
* Copyright (c) 1994, 1995, 1996, 1997, 1998, 1999, 2000 Justin T. Gibbs.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification.
|
|
* 2. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
* the GNU Public License ("GPL").
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef _AIC7XXX_H_
|
|
#define _AIC7XXX_H_
|
|
|
|
#include "ahc.h" /* for NAHC from config */
|
|
#include "opt_aic7xxx.h" /* for config options */
|
|
|
|
#include <sys/bus.h> /* For device_t */
|
|
|
|
#ifndef MAX
|
|
#define MAX(a,b) (((a) > (b)) ? (a) : (b))
|
|
#endif
|
|
|
|
#ifndef MIN
|
|
#define MIN(a,b) (((a) < (b)) ? (a) : (b))
|
|
#endif
|
|
|
|
/*
|
|
* The maximum transfer per S/G segment.
|
|
*/
|
|
#define AHC_MAXTRANSFER_SIZE 0x00ffffff /* limited by 24bit counter */
|
|
|
|
/*
|
|
* The number of dma segments supported. The current implementation limits
|
|
* us to 255 S/G entries (this may change to be unlimited at some point).
|
|
* To reduce the driver's memory consumption, we further limit the number
|
|
* supported to be sufficient to handle the largest mapping supported by
|
|
* the kernel, MAXPHYS. Assuming the transfer is as fragmented as possible
|
|
* and unaligned, this turns out to be the number of paged sized transfers
|
|
* in MAXPHYS plus an extra element to handle any unaligned residual.
|
|
*/
|
|
#define AHC_NSEG (MIN(btoc(MAXPHYS) + 1, 255))
|
|
|
|
#define AHC_SCB_MAX 255 /*
|
|
* Up to 255 SCBs on some types of aic7xxx
|
|
* based boards. The aic7870 have 16 internal
|
|
* SCBs, but external SRAM bumps this to 255.
|
|
* The aic7770 family have only 4, and the
|
|
* aic7850 has only 3.
|
|
*/
|
|
|
|
#define AHC_TMODE_CMDS 256 /*
|
|
* Ring Buffer of incoming target commands.
|
|
* We allocate 256 to simplify the logic
|
|
* in the sequencer by using the natural
|
|
* wrap point of an 8bit counter.
|
|
*/
|
|
|
|
struct ahc_dma_seg {
|
|
u_int32_t addr;
|
|
u_int32_t len;
|
|
};
|
|
|
|
typedef enum {
|
|
AHC_NONE = 0x0000,
|
|
AHC_CHIPID_MASK = 0x00FF,
|
|
AHC_AIC7770 = 0x0001,
|
|
AHC_AIC7850 = 0x0002,
|
|
AHC_AIC7855 = 0x0003,
|
|
AHC_AIC7859 = 0x0004,
|
|
AHC_AIC7860 = 0x0005,
|
|
AHC_AIC7870 = 0x0006,
|
|
AHC_AIC7880 = 0x0007,
|
|
AHC_AIC7890 = 0x0008,
|
|
AHC_AIC7892 = 0x0009,
|
|
AHC_AIC7895 = 0x000a,
|
|
AHC_AIC7896 = 0x000b,
|
|
AHC_AIC7899 = 0x000c,
|
|
AHC_VL = 0x0100, /* Bus type VL */
|
|
AHC_EISA = 0x0200, /* Bus type EISA */
|
|
AHC_PCI = 0x0400, /* Bus type PCI */
|
|
AHC_BUS_MASK = 0x0F00
|
|
} ahc_chip;
|
|
|
|
extern char *ahc_chip_names[];
|
|
|
|
typedef enum {
|
|
AHC_FENONE = 0x0000,
|
|
AHC_ULTRA = 0x0001, /* Supports 20MHz Transfers */
|
|
AHC_ULTRA2 = 0x0002, /* Supports 40MHz Transfers */
|
|
AHC_WIDE = 0x0004, /* Wide Channel */
|
|
AHC_TWIN = 0x0008, /* Twin Channel */
|
|
AHC_MORE_SRAM = 0x0010, /* 80 bytes instead of 64 */
|
|
AHC_CMD_CHAN = 0x0020, /* Has a Command DMA Channel */
|
|
AHC_QUEUE_REGS = 0x0040, /* Has Queue management registers */
|
|
AHC_SG_PRELOAD = 0x0080, /* Can perform auto-SG preload */
|
|
AHC_SPIOCAP = 0x0100, /* Has a Serial Port I/O Cap Register */
|
|
AHC_MULTI_TID = 0x0200, /* Has bitmask of TIDs for select-in */
|
|
AHC_HS_MAILBOX = 0x0400, /* Has HS_MAILBOX register */
|
|
AHC_DT = 0x0800, /* Double Transition transfers */
|
|
AHC_NEW_TERMCTL = 0x1000,
|
|
AHC_MULTI_FUNC = 0x2000, /* Multi-Function Twin Channel Device */
|
|
AHC_TARG_DMABUG = 0x4000, /* WideOdd Data-In bug in TMODE */
|
|
AHC_AIC7770_FE = AHC_TARG_DMABUG,
|
|
AHC_AIC7850_FE = AHC_TARG_DMABUG|AHC_SPIOCAP,
|
|
AHC_AIC7855_FE = AHC_AIC7850_FE,
|
|
AHC_AIC7859_FE = AHC_AIC7850_FE|AHC_ULTRA,
|
|
AHC_AIC7860_FE = AHC_AIC7859_FE,
|
|
AHC_AIC7870_FE = AHC_TARG_DMABUG,
|
|
AHC_AIC7880_FE = AHC_TARG_DMABUG|AHC_ULTRA,
|
|
AHC_AIC7890_FE = AHC_MORE_SRAM|AHC_CMD_CHAN|AHC_ULTRA2|AHC_QUEUE_REGS
|
|
|AHC_SG_PRELOAD|AHC_MULTI_TID|AHC_HS_MAILBOX
|
|
|AHC_NEW_TERMCTL,
|
|
AHC_AIC7892_FE = AHC_AIC7890_FE|AHC_DT,
|
|
AHC_AIC7895_FE = AHC_AIC7880_FE|AHC_MORE_SRAM
|
|
|AHC_CMD_CHAN|AHC_MULTI_FUNC,
|
|
AHC_AIC7895C_FE = AHC_AIC7895_FE|AHC_MULTI_TID,
|
|
AHC_AIC7896_FE = AHC_AIC7890_FE|AHC_MULTI_FUNC,
|
|
AHC_AIC7899_FE = AHC_AIC7892_FE|AHC_MULTI_FUNC
|
|
} ahc_feature;
|
|
|
|
typedef enum {
|
|
AHC_FNONE = 0x000,
|
|
AHC_PAGESCBS = 0x001,/* Enable SCB paging */
|
|
AHC_CHANNEL_B_PRIMARY = 0x002,/*
|
|
* On twin channel adapters, probe
|
|
* channel B first since it is the
|
|
* primary bus.
|
|
*/
|
|
AHC_USEDEFAULTS = 0x004,/*
|
|
* For cards without an seeprom
|
|
* or a BIOS to initialize the chip's
|
|
* SRAM, we use the default target
|
|
* settings.
|
|
*/
|
|
AHC_SHARED_SRAM = 0x010,
|
|
AHC_LARGE_SEEPROM = 0x020,/* Uses C56_66 not C46 */
|
|
AHC_RESET_BUS_A = 0x040,
|
|
AHC_RESET_BUS_B = 0x080,
|
|
AHC_EXTENDED_TRANS_A = 0x100,
|
|
AHC_EXTENDED_TRANS_B = 0x200,
|
|
AHC_TERM_ENB_A = 0x400,
|
|
AHC_TERM_ENB_B = 0x800,
|
|
AHC_INITIATORMODE = 0x1000,/*
|
|
* Allow initiator operations on
|
|
* this controller.
|
|
*/
|
|
AHC_TARGETMODE = 0x2000,/*
|
|
* Allow target operations on this
|
|
* controller.
|
|
*/
|
|
AHC_NEWEEPROM_FMT = 0x4000,
|
|
AHC_RESOURCE_SHORTAGE = 0x8000,
|
|
AHC_TQINFIFO_BLOCKED = 0x10000,/* Blocked waiting for ATIOs */
|
|
AHC_INT50_SPEEDFLEX = 0x20000,/*
|
|
* Internal 50pin connector
|
|
* sits behind an aic3860
|
|
*/
|
|
} ahc_flag;
|
|
|
|
typedef enum {
|
|
SCB_FREE = 0x0000,
|
|
SCB_OTHERTCL_TIMEOUT = 0x0002,/*
|
|
* Another device was active
|
|
* during the first timeout for
|
|
* this SCB so we gave ourselves
|
|
* an additional timeout period
|
|
* in case it was hogging the
|
|
* bus.
|
|
*/
|
|
SCB_DEVICE_RESET = 0x0004,
|
|
SCB_SENSE = 0x0008,
|
|
SCB_RECOVERY_SCB = 0x0040,
|
|
SCB_ABORT = 0x1000,
|
|
SCB_QUEUED_MSG = 0x2000,
|
|
SCB_ACTIVE = 0x4000,
|
|
SCB_TARGET_IMMEDIATE = 0x8000
|
|
} scb_flag;
|
|
|
|
/*
|
|
* The driver keeps up to MAX_SCB scb structures per card in memory. The SCB
|
|
* consists of a "hardware SCB" mirroring the fields availible on the card
|
|
* and additional information the kernel stores for each transaction.
|
|
*/
|
|
struct hardware_scb {
|
|
/*0*/ u_int8_t control;
|
|
/*1*/ u_int8_t tcl; /* 4/1/3 bits */
|
|
/*2*/ u_int8_t status;
|
|
/*3*/ u_int8_t SG_count;
|
|
/*4*/ u_int32_t SG_pointer;
|
|
/*8*/ u_int8_t residual_SG_count;
|
|
/*9*/ u_int8_t residual_data_count[3];
|
|
/*12*/ u_int32_t data;
|
|
/*16*/ u_int32_t datalen; /* Really only three bytes, but its
|
|
* faster to treat it as a long on
|
|
* a quad boundary.
|
|
*/
|
|
/*20*/ u_int32_t cmdpointer;
|
|
/*24*/ u_int8_t cmdlen;
|
|
/*25*/ u_int8_t tag; /* Index into our kernel SCB array.
|
|
* Also used as the tag for tagged I/O
|
|
*/
|
|
/*26*/ u_int8_t next; /* Used for threading SCBs in the
|
|
* "Waiting for Selection" and
|
|
* "Disconnected SCB" lists down
|
|
* in the sequencer.
|
|
*/
|
|
/*27*/ u_int8_t scsirate; /* Value for SCSIRATE register */
|
|
/*28*/ u_int8_t scsioffset; /* Value for SCSIOFFSET register */
|
|
/*29*/ u_int8_t spare[3]; /*
|
|
* Spare space available on
|
|
* all controller types.
|
|
*/
|
|
/*32*/ u_int8_t cmdstore[16]; /*
|
|
* CDB storage for controllers
|
|
* supporting 64 byte SCBs.
|
|
*/
|
|
/*48*/ u_int32_t cmdstore_busaddr; /*
|
|
* Address of command store for
|
|
* 32byte SCB adapters
|
|
*/
|
|
/*48*/ u_int8_t spare_64[12]; /*
|
|
* Pad to 64 bytes.
|
|
*/
|
|
};
|
|
|
|
struct scb {
|
|
struct hardware_scb *hscb;
|
|
SLIST_ENTRY(scb) links; /* for chaining */
|
|
union ccb *ccb; /* the ccb for this cmd */
|
|
scb_flag flags;
|
|
bus_dmamap_t dmamap;
|
|
struct ahc_dma_seg *sg_list;
|
|
bus_addr_t sg_list_phys;
|
|
u_int sg_count;/* How full ahc_dma_seg is */
|
|
};
|
|
|
|
/*
|
|
* Connection desciptor for select-in requests in target mode.
|
|
* The first byte is the connecting target, followed by identify
|
|
* message and optional tag information, terminated by 0xFF. The
|
|
* remainder is the command to execute. The cmd_valid byte is on
|
|
* an 8 byte boundary to simplify setting it on aic7880 hardware
|
|
* which only has limited direct access to the DMA FIFO.
|
|
*/
|
|
struct target_cmd {
|
|
u_int8_t initiator_channel;
|
|
u_int8_t targ_id; /* Target ID we were selected at */
|
|
u_int8_t identify; /* Identify message */
|
|
u_int8_t bytes[21];
|
|
u_int8_t cmd_valid;
|
|
u_int8_t pad[7];
|
|
};
|
|
|
|
/*
|
|
* Number of events we can buffer up if we run out
|
|
* of immediate notify ccbs.
|
|
*/
|
|
#define AHC_TMODE_EVENT_BUFFER_SIZE 8
|
|
struct ahc_tmode_event {
|
|
u_int8_t initiator_id;
|
|
u_int8_t event_type; /* MSG type or EVENT_TYPE_BUS_RESET */
|
|
#define EVENT_TYPE_BUS_RESET 0xFF
|
|
u_int8_t event_arg;
|
|
};
|
|
|
|
/*
|
|
* Per lun target mode state including accept TIO CCB
|
|
* and immediate notify CCB pools.
|
|
*/
|
|
struct tmode_lstate {
|
|
struct cam_path *path;
|
|
struct ccb_hdr_slist accept_tios;
|
|
struct ccb_hdr_slist immed_notifies;
|
|
struct ahc_tmode_event event_buffer[AHC_TMODE_EVENT_BUFFER_SIZE];
|
|
u_int8_t event_r_idx;
|
|
u_int8_t event_w_idx;
|
|
};
|
|
|
|
#define AHC_TRANS_CUR 0x01 /* Modify current neogtiation status */
|
|
#define AHC_TRANS_ACTIVE 0x03 /* Assume this is the active target */
|
|
#define AHC_TRANS_GOAL 0x04 /* Modify negotiation goal */
|
|
#define AHC_TRANS_USER 0x08 /* Modify user negotiation settings */
|
|
|
|
struct ahc_transinfo {
|
|
u_int8_t width;
|
|
u_int8_t period;
|
|
u_int8_t offset;
|
|
u_int8_t ppr_flags;
|
|
};
|
|
|
|
struct ahc_initiator_tinfo {
|
|
u_int8_t scsirate;
|
|
struct ahc_transinfo current;
|
|
struct ahc_transinfo goal;
|
|
struct ahc_transinfo user;
|
|
};
|
|
|
|
/*
|
|
* Per target mode enabled target state. Esentially just an array of
|
|
* pointers to lun target state as well as sync/wide negotiation information
|
|
* for each initiator<->target mapping (including the mapping for when we
|
|
* are the initiator).
|
|
*/
|
|
struct tmode_tstate {
|
|
struct tmode_lstate* enabled_luns[8];
|
|
struct ahc_initiator_tinfo transinfo[16];
|
|
|
|
/*
|
|
* Per initiator state bitmasks.
|
|
*/
|
|
u_int16_t ultraenb; /* Using ultra sync rate */
|
|
u_int16_t discenable; /* Disconnection allowed */
|
|
u_int16_t tagenable; /* Tagged Queuing allowed */
|
|
};
|
|
|
|
/*
|
|
* Define the format of the aic7XXX SEEPROM registers (16 bits).
|
|
*/
|
|
|
|
struct seeprom_config {
|
|
/*
|
|
* SCSI ID Configuration Flags
|
|
*/
|
|
u_int16_t device_flags[16]; /* words 0-15 */
|
|
#define CFXFER 0x0007 /* synchronous transfer rate */
|
|
#define CFSYNCH 0x0008 /* enable synchronous transfer */
|
|
#define CFDISC 0x0010 /* enable disconnection */
|
|
#define CFWIDEB 0x0020 /* wide bus device */
|
|
#define CFSYNCHISULTRA 0x0040 /* CFSYNCH is an ultra offset (2940AU)*/
|
|
#define CFSYNCSINGLE 0x0080 /* Single-Transition signalling */
|
|
#define CFSTART 0x0100 /* send start unit SCSI command */
|
|
#define CFINCBIOS 0x0200 /* include in BIOS scan */
|
|
#define CFRNFOUND 0x0400 /* report even if not found */
|
|
#define CFMULTILUN 0x0800 /* Probe multiple luns in BIOS scan */
|
|
#define CFWBCACHEENB 0x4000 /* Enable W-Behind Cache on disks */
|
|
#define CFWBCACHENOP 0xc000 /* Don't touch W-Behind Cache */
|
|
|
|
/*
|
|
* BIOS Control Bits
|
|
*/
|
|
u_int16_t bios_control; /* word 16 */
|
|
#define CFSUPREM 0x0001 /* support all removeable drives */
|
|
#define CFSUPREMB 0x0002 /* support removeable boot drives */
|
|
#define CFBIOSEN 0x0004 /* BIOS enabled */
|
|
/* UNUSED 0x0008 */
|
|
#define CFSM2DRV 0x0010 /* support more than two drives */
|
|
#define CF284XEXTEND 0x0020 /* extended translation (284x cards) */
|
|
/* UNUSED 0x0040 */
|
|
#define CFEXTEND 0x0080 /* extended translation enabled */
|
|
/* UNUSED 0xff00 */
|
|
|
|
/*
|
|
* Host Adapter Control Bits
|
|
*/
|
|
u_int16_t adapter_control; /* word 17 */
|
|
#define CFAUTOTERM 0x0001 /* Perform Auto termination */
|
|
#define CFULTRAEN 0x0002 /* Ultra SCSI speed enable */
|
|
#define CF284XSELTO 0x0003 /* Selection timeout (284x cards) */
|
|
#define CF284XFIFO 0x000C /* FIFO Threshold (284x cards) */
|
|
#define CFSTERM 0x0004 /* SCSI low byte termination */
|
|
#define CFWSTERM 0x0008 /* SCSI high byte termination */
|
|
#define CFSPARITY 0x0010 /* SCSI parity */
|
|
#define CF284XSTERM 0x0020 /* SCSI low byte term (284x cards) */
|
|
#define CFRESETB 0x0040 /* reset SCSI bus at boot */
|
|
#define CFCHNLBPRIMARY 0x0100 /* aic7895 probe B channel first */
|
|
#define CFSEAUTOTERM 0x0400 /* aic7890 Perform SE Auto Termination*/
|
|
#define CFLVDSTERM 0x0800 /* aic7890 LVD Termination */
|
|
/* UNUSED 0xf280 */
|
|
|
|
/*
|
|
* Bus Release, Host Adapter ID
|
|
*/
|
|
u_int16_t brtime_id; /* word 18 */
|
|
#define CFSCSIID 0x000f /* host adapter SCSI ID */
|
|
/* UNUSED 0x00f0 */
|
|
#define CFBRTIME 0xff00 /* bus release time */
|
|
|
|
/*
|
|
* Maximum targets
|
|
*/
|
|
u_int16_t max_targets; /* word 19 */
|
|
#define CFMAXTARG 0x00ff /* maximum targets */
|
|
/* UNUSED 0xff00 */
|
|
u_int16_t res_1[11]; /* words 20-30 */
|
|
u_int16_t checksum; /* word 31 */
|
|
};
|
|
|
|
struct ahc_syncrate {
|
|
int sxfr_u2;
|
|
int sxfr;
|
|
/* Rates in Ultra mode have bit 8 of sxfr set */
|
|
#define ULTRA_SXFR 0x100
|
|
#define ST_SXFR 0x010
|
|
u_int8_t period; /* Period to send to SCSI target */
|
|
char *rate;
|
|
};
|
|
|
|
typedef enum {
|
|
MSG_TYPE_NONE = 0x00,
|
|
MSG_TYPE_INITIATOR_MSGOUT = 0x01,
|
|
MSG_TYPE_INITIATOR_MSGIN = 0x02,
|
|
MSG_TYPE_TARGET_MSGOUT = 0x03,
|
|
MSG_TYPE_TARGET_MSGIN = 0x04
|
|
} ahc_msg_type;
|
|
|
|
struct sg_map_node {
|
|
bus_dmamap_t sg_dmamap;
|
|
bus_addr_t sg_physaddr;
|
|
struct ahc_dma_seg* sg_vaddr;
|
|
SLIST_ENTRY(sg_map_node) links;
|
|
};
|
|
|
|
struct scb_data {
|
|
struct hardware_scb *hscbs; /* Array of hardware SCBs */
|
|
struct scb *scbarray; /* Array of kernel SCBs */
|
|
SLIST_HEAD(, scb) free_scbs; /*
|
|
* Pool of SCBs ready to be assigned
|
|
* commands to execute.
|
|
*/
|
|
struct scsi_sense_data *sense; /* Per SCB sense data */
|
|
|
|
/*
|
|
* "Bus" addresses of our data structures.
|
|
*/
|
|
bus_dma_tag_t hscb_dmat; /* dmat for our hardware SCB array */
|
|
bus_dmamap_t hscb_dmamap;
|
|
bus_addr_t hscb_busaddr;
|
|
bus_dma_tag_t sense_dmat;
|
|
bus_dmamap_t sense_dmamap;
|
|
bus_addr_t sense_busaddr;
|
|
bus_dma_tag_t sg_dmat; /* dmat for our sg segments */
|
|
SLIST_HEAD(, sg_map_node) sg_maps;
|
|
u_int8_t numscbs;
|
|
u_int8_t maxhscbs; /* Number of SCBs on the card */
|
|
u_int8_t init_level; /*
|
|
* How far we've initialized
|
|
* this structure.
|
|
*/
|
|
};
|
|
|
|
struct ahc_softc {
|
|
bus_space_tag_t tag;
|
|
bus_space_handle_t bsh;
|
|
bus_dma_tag_t buffer_dmat; /* dmat for buffer I/O */
|
|
struct scb_data *scb_data;
|
|
|
|
/*
|
|
* CCBs that have been send to the controller
|
|
*/
|
|
LIST_HEAD(, ccb_hdr) pending_ccbs;
|
|
|
|
/*
|
|
* Target mode related state kept on a per enabled lun basis.
|
|
* Targets that are not enabled will have null entries.
|
|
* As an initiator, we keep one target entry for our initiator
|
|
* ID to store our sync/wide transfer settings.
|
|
*/
|
|
struct tmode_tstate* enabled_targets[16];
|
|
|
|
/*
|
|
* The black hole device responsible for handling requests for
|
|
* disabled luns on enabled targets.
|
|
*/
|
|
struct tmode_lstate* black_hole;
|
|
|
|
/*
|
|
* Device instance currently on the bus awaiting a continue TIO
|
|
* for a command that was not given the disconnect priveledge.
|
|
*/
|
|
struct tmode_lstate* pending_device;
|
|
|
|
/*
|
|
* Card characteristics
|
|
*/
|
|
ahc_chip chip;
|
|
ahc_feature features;
|
|
ahc_flag flags;
|
|
|
|
/* Values to store in the SEQCTL register for pause and unpause */
|
|
u_int8_t unpause;
|
|
u_int8_t pause;
|
|
|
|
/* Command Queues */
|
|
u_int8_t qoutfifonext;
|
|
u_int8_t qinfifonext;
|
|
u_int8_t *qoutfifo;
|
|
u_int8_t *qinfifo;
|
|
|
|
/*
|
|
* 256 byte array storing the SCBID of outstanding
|
|
* untagged SCBs indexed by TCL.
|
|
*/
|
|
u_int8_t *untagged_scbs;
|
|
|
|
/*
|
|
* Hooks into the XPT.
|
|
*/
|
|
struct cam_sim *sim;
|
|
struct cam_sim *sim_b;
|
|
struct cam_path *path;
|
|
struct cam_path *path_b;
|
|
|
|
int unit;
|
|
|
|
/* Channel Names ('A', 'B', etc.) */
|
|
char channel;
|
|
char channel_b;
|
|
|
|
/* Initiator Bus ID */
|
|
u_int8_t our_id;
|
|
u_int8_t our_id_b;
|
|
|
|
/* Targets that need negotiation messages */
|
|
u_int16_t targ_msg_req;
|
|
|
|
/*
|
|
* PCI error detection and data for running the
|
|
* PCI error interrupt handler.
|
|
*/
|
|
int unsolicited_ints;
|
|
device_t device;
|
|
|
|
/*
|
|
* Target incoming command FIFO.
|
|
*/
|
|
struct target_cmd *targetcmds;
|
|
u_int8_t tqinfifonext;
|
|
|
|
/*
|
|
* Incoming and outgoing message handling.
|
|
*/
|
|
u_int8_t send_msg_perror;
|
|
ahc_msg_type msg_type;
|
|
u_int8_t msgout_buf[8]; /* Message we are sending */
|
|
u_int8_t msgin_buf[8]; /* Message we are receiving */
|
|
u_int msgout_len; /* Length of message to send */
|
|
u_int msgout_index; /* Current index in msgout */
|
|
u_int msgin_index; /* Current index in msgin */
|
|
|
|
int regs_res_type;
|
|
int regs_res_id;
|
|
int irq_res_type;
|
|
struct resource *regs;
|
|
struct resource *irq;
|
|
void *ih;
|
|
bus_dma_tag_t parent_dmat;
|
|
bus_dma_tag_t shared_data_dmat;
|
|
bus_dmamap_t shared_data_dmamap;
|
|
bus_addr_t shared_data_busaddr;
|
|
bus_addr_t dma_bug_buf;
|
|
|
|
/* Number of enabled target mode device on this card */
|
|
u_int enabled_luns;
|
|
|
|
/* Initialization level of this data structure */
|
|
u_int init_level;
|
|
|
|
u_int16_t user_discenable;/* Disconnection allowed */
|
|
u_int16_t user_tagenable;/* Tagged Queuing allowed */
|
|
};
|
|
|
|
struct full_ahc_softc {
|
|
struct ahc_softc softc;
|
|
struct scb_data scb_data_storage;
|
|
};
|
|
|
|
/* #define AHC_DEBUG */
|
|
#ifdef AHC_DEBUG
|
|
/* Different debugging levels used when AHC_DEBUG is defined */
|
|
#define AHC_SHOWMISC 0x0001
|
|
#define AHC_SHOWCMDS 0x0002
|
|
#define AHC_SHOWSCBS 0x0004
|
|
#define AHC_SHOWABORTS 0x0008
|
|
#define AHC_SHOWSENSE 0x0010
|
|
#define AHC_SHOWSCBCNT 0x0020
|
|
|
|
extern int ahc_debug; /* Initialized in i386/scsi/aic7xxx.c */
|
|
#endif
|
|
|
|
char *ahc_name(struct ahc_softc *ahc);
|
|
|
|
struct ahc_softc*
|
|
ahc_alloc(device_t dev, struct resource *regs, int regs_type,
|
|
int regs_id, bus_dma_tag_t parent_dmat, ahc_chip chip,
|
|
ahc_feature features, ahc_flag flags,
|
|
struct scb_data *scb_data);
|
|
int ahc_reset(struct ahc_softc *ahc);
|
|
void ahc_free(struct ahc_softc *);
|
|
int ahc_probe_scbs(struct ahc_softc *);
|
|
int ahc_init(struct ahc_softc *);
|
|
int ahc_attach(struct ahc_softc *);
|
|
void ahc_intr(void *arg);
|
|
|
|
#define ahc_inb(ahc, port) \
|
|
bus_space_read_1((ahc)->tag, (ahc)->bsh, port)
|
|
|
|
#define ahc_outb(ahc, port, value) \
|
|
bus_space_write_1((ahc)->tag, (ahc)->bsh, port, value)
|
|
|
|
#define ahc_outsb(ahc, port, valp, count) \
|
|
bus_space_write_multi_1((ahc)->tag, (ahc)->bsh, port, valp, count)
|
|
|
|
#define ahc_insb(ahc, port, valp, count) \
|
|
bus_space_read_multi_1((ahc)->tag, (ahc)->bsh, port, valp, count)
|
|
|
|
#endif /* _AIC7XXX_H_ */
|