1020 lines
35 KiB
Plaintext
1020 lines
35 KiB
Plaintext
Table of Contents
|
|
-----------------
|
|
0. Document Conventions
|
|
1. Default Configuration (GENERIC kernel)
|
|
2. Using UserConfig to change FreeBSD kernel settings
|
|
3. LINT - other possible configurations
|
|
4. Supported Hardware
|
|
|
|
See TROUBLE.TXT for Q&A on known hardware problems.
|
|
|
|
=========================================================================
|
|
|
|
0. Document Conventions
|
|
-- --------------------
|
|
|
|
We have `underlined' text which represents user input with `-' symbols
|
|
throughout this document to differentiate it from the machine output.
|
|
|
|
1. Default (GENERIC) Configuration
|
|
-- -------------------------------
|
|
|
|
The following table contains a list of all of the devices that are
|
|
present in the GENERIC kernel. This is the essential part of the
|
|
operating system that is placed in your root partition during the
|
|
installation process. A compressed version of the GENERIC kernel is
|
|
also used on the installation floppy diskette and DOS boot image.
|
|
|
|
The table describes the various parameters used by the driver to
|
|
communicate with the hardware in your system. There are four
|
|
parameters in the table, though not all are used by each and every
|
|
device:
|
|
|
|
Port The starting I/O port used by the device, shown in hexadecimal.
|
|
|
|
IOMem The lowest (or starting) memory address used by the device,
|
|
also shown in hexadecimal.
|
|
|
|
IRQ The interrupt the device uses to alert the driver to an event,
|
|
given in decimal.
|
|
|
|
DRQ The DMA (direct memory access) channel the device uses to move
|
|
data to and from main memory, also given in decimal.
|
|
|
|
If an entry in the table has `n/a' for a value then it means that the
|
|
parameter in question does not apply to that device. A value of `dyn'
|
|
means that the correct value should be determined automatically by the
|
|
kernel when the system boots and that you don't need to worry about
|
|
it.
|
|
|
|
If an entry is marked with an *, it means that support is currently
|
|
not available for it but should be back as soon as someone converts
|
|
the driver to work within the new 4.0 framework.
|
|
|
|
FreeBSD GENERIC kernel:
|
|
|
|
Port IRQ DRQ IOMem Description
|
|
---- --- --- ----- ---------------------------------
|
|
fdc0 3f0 6 2 n/a Floppy disk controller
|
|
ata0 170 14 n/a n/a ATA/ATAPI controller
|
|
ata1 170 15 n/a n/a ATA/ATAPI controller
|
|
atadisk0 n/a n/a n/a n/a ATA disk drives
|
|
atapicd0 n/a n/a n/a n/a ATAPI CDROM drives
|
|
atapifd0 n/a n/a n/a n/a ATAPI floppy drives
|
|
atapist0 n/a n/a n/a n/a ATAPI tape drives
|
|
|
|
adv0 n/a n/a n/a n/a AdvanSys Narrow SCSI controllers
|
|
adw0 n/a n/a n/a n/a AdvanSys Wide SCSI controllers
|
|
amd0 n/a n/a n/a n/a AMD 53C974 (Tekram DC390(T))
|
|
ncr0 n/a n/a n/a n/a NCR PCI SCSI controller
|
|
bt0 330 dyn dyn dyn Buslogic SCSI controller
|
|
aha0 330 dyn 5 dyn Adaptec 154x/1535 SCSI controller
|
|
ahb0 dyn dyn dyn dyn Adaptec 174x SCSI controller
|
|
ahc0 dyn dyn dyn dyn Adaptec 274x/284x/294x SCSI controller
|
|
aic0 340 11 dyn dyn Adaptec 152x/AIC-6360/AIC-6260 SCSI
|
|
controller
|
|
isp0 dyn dyn dyn dyn QLogic 10X0, 1240 Ultra SCSI, 1080/1280
|
|
Ultra2 SCSI, 12160 Ultra3 SCSI, 2X00
|
|
Fibre Channel SCSI controller
|
|
dpt0 dyn dyn n/a n/a DPT RAID SCSI controllers
|
|
amr0 dyn dyn n/a n/a AMI MegaRAID controllers
|
|
mlx0 dyn dyn n/a dyn Mylex DAC960 RAID controllers
|
|
twe0 dyn dyn n/a n/a 3ware Escalade RAID controllers
|
|
asr0 dyn dyn dyn dyn DPT SmartRaid V, VI, and
|
|
Adaptec SCSI RAID
|
|
mly0 dyn dyn dyn dyn Mylex AcceleRAID/eXtremeRAID
|
|
aac dyn dyn dyn dyn Adaptec FSA family PCI SCSI RAID
|
|
ncv dyn dyn n/a n/a NCR 53C500 based PC-Card SCSI
|
|
nsp dyn dyn n/a dyn Workbit Ninja SCSI-3 based PC-Card SCSI
|
|
stg dyn dyn n/a n/a TMC 18C30/50 based ISA/PC-Card SCSI
|
|
|
|
wt0 300 5 1 dyn Wangtek and Archive QIC-02/QIC-36
|
|
|
|
psm0 60 12 n/a n/a PS/2 Mouse
|
|
|
|
mcd0 300 10 n/a n/a Mitsumi CD-ROM
|
|
matcd0 230 n/a n/a n/a Matsushita/Panasonic CD-ROM
|
|
scd0 230 n/a n/a n/a Sony CD-ROM
|
|
|
|
sio0 3f8 4 n/a n/a Serial Port 0 (COM1)
|
|
sio1 2f8 3 n/a n/a Serial Port 1 (COM2)
|
|
|
|
ppc0 dyn 7 n/a n/a Printer ports
|
|
|
|
dc0 n/a n/a n/a n/a DEC/Intel 21143 cards and workalikes
|
|
de0 n/a n/a n/a n/a DEC DC21x40 PCI based cards
|
|
(including 21140 100bT cards)
|
|
ed0 280 10 dyn d8000 WD & SMC 80xx; Novell NE1000 &
|
|
NE2000; 3Com 3C503; HP PC Lan+
|
|
ep0 300 10 dyn dyn 3Com 3C509, 3C529, 3C556, 3C562D,
|
|
3C563D, 3C572, 3C574X, 3C579, 3C589
|
|
ex0 dyn dyn dyn n/a Intel EtherExpress Pro/10 cards
|
|
fe0 300 dyn n/a n/a Allied-Telesyn AT1700, RE2000 and
|
|
Fujitsu FMV-180 series cards.
|
|
fxp0 dyn dyn n/a dyn Intel EtherExpress Pro/100B and
|
|
Intel PRO/100+ Management Adapter
|
|
ie0 300 10 dyn d0000 AT&T StarLAN 10 and EN100;
|
|
3Com 3C507; NI5210;
|
|
Intel EtherExpress (8/16,16[TP]) cards
|
|
le0 300 5 dyn d0000 Digital Equipment EtherWorks
|
|
2 and EtherWorks 3
|
|
lnc0 280 10 n/a dyn Lance/PCnet cards
|
|
(Isolan, Novell NE2100, NE32-VL,
|
|
some PCnet-PCI cards)
|
|
pcn0 dyn dyn n/a dyn AMD PCnet/FAST, PCnet/FAST+,
|
|
PCnet/FAST III, PCnet/PRO, PCnet/Home,
|
|
and HomePNA cards
|
|
rl0 dyn dyn n/a dyn RealTek 8129/8139 fast ethernet
|
|
sf0 dyn dyn n/a dyn Adaptec AIC-6915 fast ethernet
|
|
sis0 dyn dyn n/a dyn SiS 900/SiS 7016 fast ethernet
|
|
sn0 0x300 10 n/a n/a SMC 91xx ethernet
|
|
ste0 dyn dyn n/a dyn Sundance ST201 fast ethernet
|
|
tl0 dyn dyn n/a dyn TI TNET100 'ThunderLAN' cards.
|
|
tx0 dyn dyn n/a dyn SMC 9432 'Epic' fast ethernet
|
|
wb0 dyn dyn n/a dyn Winbond W89C840F PCI based cards.
|
|
vr0 dyn dyn n/a dyn VIA VT3043/VT86C100A PCI based cards.
|
|
vx0 dyn dyn n/a dyn 3Com 3c59x ((Fast) Etherlink III)
|
|
xe0 dyn dyn n/a dyn Xircom CreditCard adapters(16bit)
|
|
xl0 dyn dyn n/a dyn 3Com 3c900, 3c905, 3c905B, 3c905C,
|
|
3c980, 3cSOHO100 ((Fast) Etherlink XL)
|
|
cs0 0x300 dyn n/a n/a Crystal Semiconductor CS89x0-based
|
|
cards.
|
|
--- End of table ---
|
|
|
|
|
|
If the hardware in your computer is not set to the same settings as
|
|
those shown in the table and the item in conflict is not marked 'dyn',
|
|
you will have to either reconfigure your hardware or use UserConfig
|
|
to reconfigure the kernel to match the way your hardware is currently set
|
|
(see the next section).
|
|
|
|
If the settings do not match, the kernel may be unable to locate
|
|
or reliably access the devices in your system.
|
|
|
|
|
|
2. Using UserConfig to change FreeBSD kernel settings
|
|
-- --------------------------------------------------
|
|
|
|
The FreeBSD kernel on the install floppy contains drivers for every
|
|
piece of hardware that could conceivably be used to install the rest
|
|
of the system with. Unfortunately, PC hardware being what it is, some
|
|
of these devices can be difficult to detect accurately, and for some,
|
|
the process of detecting another can cause irreversible confusion.
|
|
|
|
To make this process easier, FreeBSD provides UserConfig. With this
|
|
tool the user can configure and disable device drivers before
|
|
the kernel is loaded, avoiding potential conflicts, and eliminating
|
|
the need to reconfigure hardware to suit the default driver settings.
|
|
|
|
Once FreeBSD is installed, it will remember the changes made using
|
|
UserConfig, so that they only need be made once.
|
|
|
|
It is important to disable drivers that are not relevant to a system
|
|
in order to minimize the possibility of interference, which can cause
|
|
problems that are difficult to track down.
|
|
|
|
UserConfig features a command line interface for users with serial
|
|
consoles or a need to type commands, and a full screen 'visual'
|
|
interface, which provides point-and-shoot configuration functionality.
|
|
|
|
Here is a sample UserConfig screen shot in 'visual' mode:
|
|
|
|
---Active Drivers---------------------------10 Conflicts------Dev---IRQ--Port--
|
|
Storage : (Collapsed)
|
|
Network :
|
|
NE1000,NE2000,3C503,WD/SMC80xx Ethernet adapters CONF ed0 5 0x280
|
|
NE1000,NE2000,3C503,WD/SMC80xx Ethernet adapters CONF ed1 5 0x300
|
|
Communications : (Collapsed)
|
|
Input : (Collapsed)
|
|
Multimedia :
|
|
---Inactive Drivers-------------------------------------------Dev--------------
|
|
Storage :
|
|
Network : (Collapsed)
|
|
Communications :
|
|
Input :
|
|
Multimedia :
|
|
|
|
|
|
---Parameters-for-device-ed0---------------------------------------------------
|
|
Port address : 0x280 Memory address : 0xd8000
|
|
IRQ number : 5 Memory size : 0x2000
|
|
Flags : 0x0000
|
|
-------------------------------------------------------------------------------
|
|
IO Port address (Hexadecimal, 0x1-0x2000)
|
|
[TAB] Change fields [Q] Save device parameters
|
|
|
|
|
|
The screen is divided into four sections :
|
|
|
|
- Active Drivers. Listed here are the device drivers that are currently
|
|
enabled, and their basic parameters.
|
|
- Inactive Drivers. These drivers are present, but are disabled.
|
|
- Parameter edit field. This area is used for editing driver parameters.
|
|
- Help area. Keystroke help is displayed here.
|
|
|
|
One of the Active and Inactive lists is always in use, and the current
|
|
entry in the list will be shown with a highlight bar. If there are
|
|
more entries in a list than can be shown, it will scroll. The bar can
|
|
be moved up and down using the cursor keys, and moved between lists
|
|
with the TAB key.
|
|
|
|
Drivers in the Active list may be marked "CONF". This indicates that
|
|
one or more of their parameters conflicts with another device, and
|
|
indicates a potential for problems. The total number of conflicts is
|
|
displayed at the top of the screen.
|
|
|
|
As a general rule, conflicts should be avoided, either by disabling
|
|
conflicting devices that are not present in the system, or by altering
|
|
their configuration so that they match the installed hardware.
|
|
|
|
In the list areas, drivers are grouped by their basic function.
|
|
Groups can be 'Collapsed' to simplify the display (this is the default
|
|
state for all groups). If a group is collapsed, it will be shown with
|
|
'(Collapsed)' in the list, as above. To Expand a Collapsed group,
|
|
position the highlight bar over the group heading and press Enter. To
|
|
Collapse it again, repeat the process.
|
|
|
|
When a device driver in the Active list is highlighted, its full
|
|
parameters are displayed in the Parameter edit area. Note that not
|
|
all drivers use all possible parameters, and some hardware supported
|
|
by drivers may not use all the parameters the driver supports.
|
|
|
|
To disable a driver, go to the Active list, Expand the group it is in,
|
|
highlight the driver and press Del. The driver will move to its group
|
|
in the Inactive list. (If the group is collapsed or off the screen,
|
|
you may not see the driver in its new location.)
|
|
|
|
To enable a driver, go to the Inactive list, Expand the group it is
|
|
in, highlight the driver and press Enter. The highlight will move to
|
|
the Active list, and the driver you have just enabled will be
|
|
highlighted, ready to be configured.
|
|
|
|
To configure a driver, go to the Active list, Expand the group it is
|
|
in, highlight the driver and press Enter. The cursor will move to the
|
|
Parameter edit area, and the device's parameters may be edited.
|
|
|
|
While editing parameters, the TAB and cursor keys can be used to move
|
|
between fields. Most numeric values (except IRQ) are entered in
|
|
hexadecimal, as indicated by the '0x' at the beginning of the field.
|
|
The allowable values for a given field are show in the Key Help area
|
|
when the field is active.
|
|
|
|
To finish configuring a driver, press 'Q'.
|
|
|
|
Note that PCI, Microchannel and EISA devices can be probed reliably,
|
|
therefore they are not shown in the table above nor can their settings
|
|
be changed using UserConfig.
|
|
|
|
|
|
3. LINT - other possible configurations
|
|
-- ------------------------------------
|
|
|
|
The following drivers are not in the GENERIC kernel but remain
|
|
available to those who do not mind compiling a custom kernel (see
|
|
section 6 of FreeBSD.FAQ). The LINT configuration file
|
|
(/sys/i386/conf/LINT) also contains prototype entries for just about
|
|
every device supported by FreeBSD and is a good general reference.
|
|
|
|
The device names and a short description of each are listed below. The port
|
|
numbers, etc, are not meaningful here since you will need to compile a
|
|
custom kernel to gain access to these devices anyway and can thus
|
|
adjust the addresses to match the hardware in your computer in the process.
|
|
The LINT file contains prototype entries for all of the below which you
|
|
can easily cut-and-paste into your own file (or simply copy LINT and edit
|
|
it to taste):
|
|
|
|
ata: Alternate high-performance driver for IDE controllers
|
|
ctx: Cortex-I frame grabber
|
|
cx: Cronyx/Sigma multiport sync/async
|
|
cy: Cyclades high-speed serial driver
|
|
el: 3Com 3C501
|
|
fea: DEC DEFEA EISA FDDI adapter
|
|
fpa: DEC DEFPA PCI FDDI adapter
|
|
gp: National Instruments AT-GPIB and AT-GPIB/TNT board
|
|
gsc: Genius GS-4500 hand scanner
|
|
gus: Gravis Ultrasound - Ultrasound, Ultrasound 16, Ultrasound MAX
|
|
gusxvi: Gravis Ultrasound 16-bit PCM
|
|
hea: Efficient ENI-155p ATM PCI adapter
|
|
hfa: FORE PCA-200E ATM PCI adapter
|
|
ifpi: isdn4bsd AVM Fritz!card PCI driver
|
|
ifpnp: isdn4bsd AVM Fritz!card PnP driver
|
|
ihfc: isdn4bsd Cologne Chip HFC ISA driver
|
|
isic: isdn4bsd Siemens/Infineon ISDN chipset driver (ISAC+HSCX/IPAC)
|
|
iwic: isdn4bsd Winbond W6692 PCI ISDN chip driver
|
|
joy: Joystick
|
|
labpc: National Instrument's Lab-PC and Lab-PC+
|
|
meteor: Matrox Meteor frame-grabber card
|
|
bktr: Brooktree Bt848 / Bt 878 based frame-grabber cards.
|
|
mpu: Roland MPU-401 stand-alone card
|
|
mse: Microsoft, Logitech, ATI bus mouse ports
|
|
mss: Microsoft Sound System
|
|
opl: Yamaha OPL-2 and OPL-3 FM - SB, SB Pro, SB 16, ProAudioSpectrum
|
|
pas: ProAudioSpectrum PCM and MIDI
|
|
pca: PCM audio ("/dev/audio") through your PC speaker
|
|
pcm: PCM audio on most modern PCI/ISA audio codecs
|
|
psm: PS/2 mouse port
|
|
rc: RISCom/8 multiport card
|
|
sb: SoundBlaster PCM - SoundBlaster, SB Pro, SB16, ProAudioSpectrum
|
|
sbmidi: SoundBlaster 16 MIDI interface
|
|
sbxvi: SoundBlaster 16
|
|
si: Specialix SI/XIO/SX (old and enhanced ISA, PCI, EISA) serial
|
|
sym: Alternate high-performance driver for NCR/LSI Logic SCSI controllers
|
|
spigot: Creative Labs Video Spigot video-acquisition board
|
|
uart: Stand-alone 6850 UART for MIDI
|
|
wds: Western Digital WD7000 IDE
|
|
|
|
--- end of list ---
|
|
|
|
|
|
4. Supported Hardware
|
|
-- ------------------
|
|
|
|
FreeBSD currently runs on a wide variety of ISA, VLB, EISA,
|
|
Microchannel and PCI bus based PC's, ranging from 386sx to Pentium
|
|
class machines (though the 386sx is not recommended). Support for
|
|
generic IDE or ESDI drive configurations, various SCSI controller,
|
|
network and serial cards is also provided.
|
|
|
|
What follows is a list of all peripherals currently known to work with
|
|
FreeBSD. Other configurations may also work, we have simply not as yet
|
|
received confirmation of this.
|
|
|
|
|
|
4.1. Disk Controllers
|
|
---- ----------------
|
|
|
|
IDE
|
|
ATA controllers:
|
|
Acerlabs Aladdin
|
|
AMD 756
|
|
CMD 646
|
|
CMD 648 ATA66
|
|
CMD 649 ATA100
|
|
Cypress 82C693
|
|
Cyrex 5530
|
|
HighPoint HPT366
|
|
HighPoint HPT370
|
|
Intel PIIX
|
|
Intel PIIX3
|
|
Intel PIIX4
|
|
Intel ICH
|
|
Intel ICH2
|
|
Promise ATA100 OEM chip (pdc20265)
|
|
Promise Fasttrak-33
|
|
Promise Fasttrak-66
|
|
Promise Fasttrak-100
|
|
Promise Ultra-33
|
|
Promise Ultra-66
|
|
Promise Ultra-100
|
|
ServerWorks ROSB4 ATA33
|
|
SiS 5591
|
|
VIA 82C586
|
|
VIA 82C686
|
|
|
|
WD1003 (any generic MFM/RLL - obsolete)
|
|
WD1007 (any generic ESDI - obsolete)
|
|
* Note: now that the wd driver has been replaced by the ata driver framework,
|
|
which does not have bad144 support, the true MFM/RLL/ESDI drives/adapters
|
|
have become obsolete.
|
|
|
|
Adaptec 1535 ISA SCSI controllers
|
|
Adaptec 154x series ISA SCSI controllers
|
|
Adaptec 174x series EISA SCSI controller in standard and enhanced mode.
|
|
Adaptec 274X/284X/2920C/294x/2950/19160/29160/3940/3950/39160
|
|
Narrow/Wide/Twin series EISA/VLB/PCI SCSI controllers.
|
|
Adaptec AIC7850, AIC7860, AIC7880, AIC789x, on-board SCSI controllers.
|
|
Adaptec 1510 series ISA SCSI controllers (not for bootable devices)
|
|
Adaptec 152x series ISA SCSI controllers
|
|
Adaptec AIC-6260 and AIC-6360 based boards, which includes the AHA-152x
|
|
and SoundBlaster SCSI cards.
|
|
|
|
Adaptec 1400, 2100S, 3200S, and 3400S SCSI RAID controllers.
|
|
|
|
Adaptec FSA family RAID controllers:
|
|
Adaptec AAC-2622
|
|
Adaptec AAC-364
|
|
Adaptec AAC-3642
|
|
Dell PERC 2/QC
|
|
Dell PERC 2/Si
|
|
Dell PERC 3/Di
|
|
Dell PERC 3/QC
|
|
Dell PERC 3/Si
|
|
HP NetRAID-4M
|
|
|
|
AdvanSys SCSI controllers (all models).
|
|
|
|
BusLogic MultiMaster controllers:
|
|
|
|
[ Please note that BusLogic/Mylex "Flashpoint" adapters are NOT yet supported ]
|
|
|
|
BusLogic MultiMaster "W" Series Host Adapters:
|
|
BT-948, BT-958, BT-958D
|
|
BusLogic MultiMaster "C" Series Host Adapters:
|
|
BT-946C, BT-956C, BT-956CD, BT-445C, BT-747C, BT-757C, BT-757CD, BT-545C,
|
|
BT-540CF
|
|
BusLogic MultiMaster "S" Series Host Adapters:
|
|
BT-445S, BT-747S, BT-747D, BT-757S, BT-757D, BT-545S, BT-542D, BT-742A,
|
|
BT-542B
|
|
BusLogic MultiMaster "A" Series Host Adapters:
|
|
BT-742A, BT-542B
|
|
|
|
AMI FastDisk controllers that are true BusLogic MultiMaster clones are also
|
|
supported.
|
|
|
|
DPT SmartCACHE Plus, SmartCACHE III, SmartRAID III, SmartCACHE IV and
|
|
SmartRAID IV SCSI/RAID controllers.
|
|
|
|
DPT SmartRAID V and VI SCSI RAID, and Adaptec SCSI RAID controllers:
|
|
PM1554, PM2554, PM2654, PM2865, PM2754, PM3755, PM3757,
|
|
2100S, 3200S, 3400S
|
|
|
|
AMI MegaRAID Express and Enterprise family RAID controllers:
|
|
MegaRAID 418
|
|
MegaRAID Enterprise 1200 (428)
|
|
MegaRAID Enterprise 1300
|
|
MegaRAID Enterprise 1400
|
|
MegaRAID Enterprise 1500
|
|
MegaRAID Enterprise 1600
|
|
MegaRAID Elite 1500
|
|
MegaRAID Elite 1600
|
|
MegaRAID Express 200
|
|
MegaRAID Express 300
|
|
MegaRAID Express 500
|
|
Dell PERC
|
|
Dell PERC 2/SC
|
|
Dell PERC 2/DC
|
|
Some HP NetRAID controllers are OEM versions of AMI designs, and
|
|
these are also supported.
|
|
|
|
Mylex DAC960 and DAC1100 RAID controllers with 2.x, 3.x, 4.x and 5.x
|
|
firmware:
|
|
DAC960P
|
|
DAC960PD
|
|
DAC960PDU
|
|
DAC960PL
|
|
DAC960PJ
|
|
DAC960PG
|
|
AcceleRAID 150
|
|
AcceleRAID 250
|
|
eXtremeRAID 1100
|
|
This list includes controllers sold by Digital/Compaq in Alpha systems
|
|
in the StorageWorks family, eg. KZPSC, KZPAC. EISA adaptes are not
|
|
supported.
|
|
|
|
Mylex PCI to SCSI RAID controllers with 6.x firmware:
|
|
AcceleRAID 160
|
|
AcceleRAID 170
|
|
AcceleRAID 352
|
|
eXtremeRAID 2000
|
|
eXtremeRAID 3000
|
|
Compatible Mylex controllers not listed should work, but have not been
|
|
verified.
|
|
|
|
3ware Escalade ATA RAID controllers. All members of the 5000 and
|
|
6000 series are supported.
|
|
|
|
Qlogic Controllers:
|
|
Qlogic 1020, 1040 SCSI and Ultra SCSI Host Adaptes
|
|
Qlogic 1240 dual Ultra SCSI controllers
|
|
Qlogic 1080 Ultra2 LVD and 1280 Dual Ultra2 LVD Controllers
|
|
Qlogic 12160 Ultra3 LVD Controllers
|
|
Qlogic 2100 and Qlogic 2200 Fibre Channel SCSI Controllers
|
|
|
|
SymBios (formerly NCR) 53C810, 53C810a, 53C815, 53C820, 53C825a, 53C860,
|
|
53C875, 53C875e, 53C875j, 53C885, 53C895 and 53C896 PCI SCSI controllers:
|
|
ASUS SC-200
|
|
Data Technology DTC3130 (all variants)
|
|
DawiControl DC2976UW
|
|
Diamond FirePort (all)
|
|
NCR cards (all)
|
|
Symbios cards (all)
|
|
Tekram DC390W, 390U and 390F
|
|
Tyan S1365
|
|
|
|
NCR 53C500 based PC-Card SCSI host adapters:
|
|
IO DATA PCSC-DV
|
|
KME KXLC002(TAXAN ICD-400PN, etc.), KXLC004
|
|
Macnica Miracle SCSI-II mPS110
|
|
Media Intelligent MSC-110, MSC-200
|
|
NEC PC-9801N-J03R
|
|
New Media Corporation BASICS SCSI
|
|
Qlogic Fast SCSI
|
|
RATOC REX-9530, REX-5572 (as SCSI only)
|
|
|
|
TMC 18C30, 18C50 based ISA/PC-Card SCSI host adapters:
|
|
Future Domain SCSI2GO
|
|
IBM SCSI PCMCIA Card
|
|
ICM PSC-2401 SCSI
|
|
Melco IFC-SC
|
|
RATOC REX-5536, REX-5536AM, REX-5536M, REX-9836A
|
|
|
|
DTC 3290 EISA SCSI controller in 1542 emulation mode.
|
|
|
|
Tekram DC390 and DC390T controllers (maybe other cards based on the
|
|
AMD 53c974 as well).
|
|
|
|
Workbit Ninja SCSI-3 based PC-Card SCSI host adapters:
|
|
Alpha-Data AD-PCS201
|
|
IO DATA CBSC16
|
|
|
|
With all supported SCSI controllers, full support is provided for
|
|
SCSI-I & SCSI-II peripherals, including hard disks, optical disks,
|
|
tape drives (including DAT and 8mm Exabyte), medium changers, processor
|
|
target devices and CDROM drives. WORM devices that support CDROM commands
|
|
are supported for read-only access by the CDROM driver. WORM/CD-R/CD-RW
|
|
writing support is provided by cdrecord, which is in the ports tree.
|
|
|
|
The following CD-ROM type systems are supported at this time:
|
|
(cd) SCSI interface (also includes SoundBlaster SCSI)
|
|
(matcd) Matsushita/Panasonic (Creative SoundBlaster) proprietary
|
|
interface (562/563 models)
|
|
(scd) Sony proprietary interface (all models)
|
|
(acd) ATAPI IDE interface
|
|
|
|
Unmaintained drivers, they might or might not work for your hardware:
|
|
|
|
(mcd) Mitsumi proprietary CD-ROM interface (all models)
|
|
|
|
4.2. Network cards
|
|
---- -------------
|
|
|
|
Adaptec Duralink PCI fast ethernet adapters based on the Adaptec
|
|
AIC-6915 fast ethernet controller chip, including the following:
|
|
ANA-62011 64-bit single port 10/100baseTX adapter
|
|
ANA-62022 64-bit dual port 10/100baseTX adapter
|
|
ANA-62044 64-bit quad port 10/100baseTX adapter
|
|
ANA-69011 32-bit single port 10/100baseTX adapter
|
|
ANA-62020 64-bit single port 100baseFX adapter
|
|
|
|
Allied-Telesyn AT1700 and RE2000 cards
|
|
|
|
Alteon Networks PCI gigabit ethernet NICs based on the Tigon 1 and Tigon 2
|
|
chipsets, including the following:
|
|
3Com 3c985-SX (Tigon 1 and 2)
|
|
Alteon AceNIC (Tigon 1 and 2)
|
|
Alteon AceNIC 1000baseT (Tigon 2)
|
|
DEC/Compaq EtherWORKS 1000
|
|
Farallon PN9000SX
|
|
NEC Gigabit Ethernet
|
|
Netgear GA620 (Tigon 2)
|
|
Netgear GA620T (Tigon 2, 1000baseT)
|
|
Silicon Graphics Gigabit Ethernet
|
|
|
|
AMD PCnet/PCI (79c970 & 53c974 or 79c974)
|
|
AMD PCnet/FAST, PCnet/FAST+, PCnet/FAST III, PCnet/PRO, HomePCI, and HomePNA.
|
|
|
|
SMC Elite 16 WD8013 ethernet interface, and most other WD8003E,
|
|
WD8003EBT, WD8003W, WD8013W, WD8003S, WD8003SBT and WD8013EBT
|
|
based clones. SMC Elite Ultra is also supported.
|
|
|
|
RealTek 8129/8139 fast ethernet NICs including the following:
|
|
Accton "Cheetah" EN1027D (MPX 5030/5038; RealTek 8139 clone?)
|
|
Allied Telesyn AT2550
|
|
Allied Telesyn AT2500TX
|
|
Genius GF100TXR (RTL8139)
|
|
KTX-9130TX 10/100 Fast Ethernet
|
|
NDC Communications NE100TX-E
|
|
Netronix Inc. EA-1210 NetEther 10/100
|
|
OvisLink LEF-8129TX
|
|
OvisLink LEF-8139TX
|
|
SMC EZ Card 10/100 PCI 1211-TX
|
|
|
|
Lite-On 82c168/82c169 PNIC fast ethernet NICs including the following:
|
|
Kingston KNE110TX
|
|
LinkSys EtherFast LNE100TX
|
|
Matrox FastNIC 10/100
|
|
NetGear FA310-TX Rev. D1
|
|
|
|
Macronix 98713, 98713A, 98715, 98715A and 98725 fast ethernet NICs
|
|
Accton EN1217 (98715A)
|
|
Adico AE310TX (98715A)
|
|
CNet Pro120A (98713 or 98713A)
|
|
CNet Pro120B (98715)
|
|
NDC Communications SFA100A (98713A)
|
|
SVEC PN102TX (98713)
|
|
|
|
Macronix/Lite-On PNIC II LC82C115 fast ethernet NICs including the following:
|
|
LinkSys EtherFast LNE100TX Version 2
|
|
|
|
Winbond W89C840F fast ethernet NICs including the following:
|
|
Trendware TE100-PCIE
|
|
|
|
VIA Technologies VT3043 "Rhine I" and VT86C100A "Rhine II" fast ethernet
|
|
NICs including the following:
|
|
AOpen/Acer ALN-320
|
|
D-Link DFE-530TX
|
|
Hawking Technologies PN102TX
|
|
|
|
Silicon Integrated Systems SiS 900 and SiS 7016 PCI fast ethernet NICs
|
|
|
|
National Semiconductor DP83815 fast ethernet NICs including the following:
|
|
NetGear FA311-TX
|
|
NetGear FA312-TX
|
|
|
|
Sundance Technologies ST201 PCI fast ethernet NICs including
|
|
the following:
|
|
D-Link DFE-550TX
|
|
|
|
SysKonnect SK-984x PCI gigabit ethernet cards including the following:
|
|
SK-9841 1000baseLX single mode fiber, single port
|
|
SK-9842 1000baseSX multimode fiber, single port
|
|
SK-9843 1000baseLX single mode fiber, dual port
|
|
SK-9844 1000baseSX multimode fiber, dual port
|
|
SK-9821 1000baseT copper, single port
|
|
SK-9822 1000baseT copper, dual port
|
|
|
|
Texas Instruments ThunderLAN PCI NICs, including the following:
|
|
Compaq Netelligent 10, 10/100, 10/100 Proliant, 10/100 Dual-Port
|
|
Compaq Netelligent 10/100 TX Embedded UTP, 10 T PCI UTP/Coax, 10/100 TX UTP
|
|
Compaq NetFlex 3P, 3P Integrated, 3P w/ BNC
|
|
Olicom OC-2135/2138, OC-2325, OC-2326 10/100 TX UTP
|
|
Racore 8165 10/100baseTX
|
|
Racore 8148 10baseT/100baseTX/100baseFX multi-personality
|
|
|
|
ADMtek Inc. AL981-based PCI fast ethernet NICs
|
|
|
|
ADMtek Inc. AN985-based PCI fast ethernet NICs including the following:
|
|
LinkSys EtherFast LNE100TX v4.0/4.1
|
|
|
|
ADMtek Inc. AN986-based USB ethernet NICs including the following:
|
|
Billionton USB100
|
|
D-Link DSB-650TX
|
|
LinkSys USB100TX
|
|
Melco Inc. LUA-TX
|
|
SMC 2202USB
|
|
|
|
CATC USB-EL1210A-based USB ethernet NICs including the following:
|
|
Belkin F5U011
|
|
Belkin F5U111
|
|
CATC Netmate
|
|
CATC Netmate II
|
|
|
|
Kawasaki LSI KL5KUSB101B-based USB ethernet NICs including
|
|
the following:
|
|
3Com 3c19250
|
|
ADS Technologies USB-10BT
|
|
ATen UC10T
|
|
Corega USB-T
|
|
D-Link DSB-650
|
|
Entrega NET-USB-E45
|
|
LinkSys USB10T
|
|
Netgear EA101
|
|
Peracom USB Ethernet Adapter
|
|
SMC 2102USB
|
|
SMC 2104USB
|
|
|
|
ASIX Electronics AX88140A PCI NICs, including the following:
|
|
Alfa Inc. GFC2204
|
|
CNet Pro110B
|
|
|
|
DEC EtherWORKS III NICs (DE203, DE204, and DE205)
|
|
DEC EtherWORKS II NICs (DE200, DE201, DE202, and DE422)
|
|
DEC DC21040, DC21041, or DC21140 based NICs (SMC Etherpower 8432T, DE245, etc)
|
|
DEC FDDI (DEFPA/DEFEA) NICs
|
|
|
|
Davicom DM9100 and DM9102 PCI fast ethernet NICs, including the
|
|
following:
|
|
Jaton Corporation XPressNet
|
|
|
|
Efficient ENI-155p ATM PCI
|
|
|
|
FORE PCA-200E ATM PCI
|
|
|
|
Fujitsu MB86960A/MB86965A, including the following:
|
|
CONTEC C-NET(PC)C Ethernet
|
|
Eiger Labs EPX-10BT
|
|
Fujitsu FMV-J182, FMV-J182A, MBH10302, MBH10303 Ethernet PCMCIA
|
|
Fujitsu Towa LA501 Ethernet
|
|
HITACHI HT-4840-11
|
|
NextCom J Link NC5310
|
|
RATOC REX-5588, REX-9822, REX-4886, REX-R280
|
|
TDK LAK-CD021, LAK-CD021A, LAK-CD021BX
|
|
|
|
HP PC Lan+ cards (model numbers: 27247B and 27252A).
|
|
|
|
Intel EtherExpress (not recommended due to driver instability)
|
|
Intel EtherExpress Pro/10
|
|
Intel EtherExpress Pro/100B PCI Fast Ethernet
|
|
Intel PRO/100+ Management Adapter
|
|
Intel Gigabit Ethernet (PRO/1000)
|
|
|
|
Isolan AT 4141-0 (16 bit)
|
|
Isolink 4110 (8 bit)
|
|
|
|
Novell NE1000, NE2000, and NE2100 ethernet interface.
|
|
PCI network cards emulating the NE2000: RealTek 8029, NetVin 5000,
|
|
Winbond W89C940, Surecom NE-34, VIA VT86C926, etc.
|
|
|
|
3Com 3C501 cards
|
|
|
|
3Com 3C503 Etherlink II
|
|
|
|
3Com 3C507 Etherlink 16/TP
|
|
|
|
3Com 3C509, 3C529, 3C556, 3C562D, 3C563D, 3C572, 3C574X, 3C579,
|
|
3C589/589B/589C/589D/589E/XE589ET/574TX/574B (PC-card/PCMCIA),
|
|
3C590/592/595/900/905/905B/905C PCI,
|
|
3C556-556B MiniPCI,
|
|
3C575B/575C/656/656B/656C Cardbus,
|
|
and EISA (Fast) Etherlink III / (Fast) Etherlink XL
|
|
|
|
3Com 3c980/3c980B/3c980C Fast Etherlink XL server adapter
|
|
|
|
3Com 3cSOHO100-TX OfficeConnect adapter
|
|
|
|
3Com 3c450-TX HomeConnect adapter
|
|
|
|
NE2000 compatible PC-Card (PCMCIA) Ethernet/FastEthernet cards,
|
|
including the following:
|
|
AR-P500 Ethernet card
|
|
Accton EN2212/EN2216/UE2216(OEM)
|
|
Allied Telesis CentreCOM LA100-PCM_V2
|
|
AmbiCom 10BaseT card
|
|
BayNetworks NETGEAR FA410TXC Fast Ethernet
|
|
CNet BC40 adapter
|
|
COREGA Ether PCC-T/EtherII PCC-T/FEther PCC-TXF
|
|
Compex Net-A adapter
|
|
CyQ've ELA-010
|
|
D-Link DE-650/660
|
|
Danpex EN-6200P2
|
|
IO DATA PCLATE
|
|
IBM Creditcard Ethernet I/II
|
|
IC-CARD Ethernet/IC-CARD+ Ethernet
|
|
Linksys EC2T/PCMPC100
|
|
Melco LPC-T/LPC2-T/LPC3-TX
|
|
NDC Ethernet Instant-Link
|
|
National Semiconductor InfoMover NE4100
|
|
Network Everywhere Ethernet 10BaseT PC Card
|
|
Planex FNW-3600-T
|
|
Socket LP-E
|
|
Surecom EtherPerfect EP-427
|
|
TDK LAK-CD031,Grey Cell GCS2000 Ethernet Card
|
|
Telecom Device SuperSocket RE450T
|
|
|
|
Megahertz X-Jack Ethernet PC-Card CC-10BT
|
|
|
|
Xircom X3201 (Cardbus) based Ethernet cards,
|
|
including the following:
|
|
IBM EtherJet Cardbus Adapter
|
|
Intel PRO/100 Mobile Cardbus (versions that uses the X3201 chipset)
|
|
Xircom Cardbus Realport
|
|
Xircom Cardbus Ethernet 10/100
|
|
Xircom Cardbus Ethernet II 10/100
|
|
|
|
Xircom CreditCard adapters(16bit) and workalikes
|
|
Accton EN2226/Fast EtherCard (16-bit verison)
|
|
Compaq Netelligent 10/100 PC Card
|
|
Intel EtherExpress PRO/100 Mobile Adapter (16-bit verison)
|
|
Xircom Realport card + modem(Ethernet part)
|
|
Xircom CreditCard Ethernet 10/100
|
|
Xircom CreditCard 10Base-T "CreditCard Ethernet Adaptor IIps" (PS-CE2-10)
|
|
Xircom CreditCard Ethernet 10/100 + modem (Ethernet part)
|
|
|
|
National Semiconductor DP8393X (SONIC) Ethernet cards
|
|
NEC PC-9801-83, -84, -103, and -104
|
|
NEC PC-9801N-25 and -J02R
|
|
|
|
|
|
4.3. USB
|
|
---- ---
|
|
|
|
A range of USB peripherals are supported. Owing to the generic nature
|
|
of most USB devices, with some exceptions any device of a given class
|
|
will be supported even if not explicitly listed here.
|
|
|
|
USB keyboards.
|
|
|
|
USB mice.
|
|
|
|
USB printers and USB to parallel printer conversion cables.
|
|
|
|
USB hubs.
|
|
|
|
USB ethernet controllers.
|
|
|
|
|
|
USB Host Controllers:
|
|
ALi Aladdin-V.
|
|
AMD-756.
|
|
CMD Tech 670 & 673.
|
|
Intel 82371SB (PIIX3).
|
|
Intel 82371AB and EB chipsets (PIIX4).
|
|
NEC uPD 9210.
|
|
OPTi 82C861 (FireLink).
|
|
SiS 5571.
|
|
VIA 83C572 USB.
|
|
and any other UHCI or OHCI compliant motherboard chipset (no exceptions
|
|
known).
|
|
|
|
|
|
PCI plug-in USB host controllers:
|
|
ADS Electronics PCI plug-in card (2 ports).
|
|
Entrega PCI plug-in card (4 ports).
|
|
|
|
|
|
Specific devices reported to be working (see above for USB ethernet devices
|
|
supported):
|
|
|
|
Floppy drives/Hard disks/CDROMs/Zip drives/etc:
|
|
Iomega USB Zip 100Mb (primitive support still).
|
|
Matshita CF-VFDU03 floppy drive.
|
|
Microtech USB-SCSI-HD 50 USB to SCSI cable.
|
|
Panasonic floppy drive.
|
|
Y-E Data floppy drive (720/1.44/2.88Mb).
|
|
|
|
Hubs:
|
|
Andromeda hub.
|
|
MacAlly self powered hub (4 ports).
|
|
NEC hub.
|
|
|
|
Keyboards:
|
|
Apple iMac keyboard.
|
|
BTC BTC7935 keyboard with PS/2 mouse port.
|
|
Cherry G81-3504 keyboard.
|
|
Logitech M2452 keyboard.
|
|
MacAlly iKey keyboard.
|
|
Microsoft keyboard.
|
|
|
|
Mice:
|
|
Agiler Mouse 29UO.
|
|
Apple iMac Mouse.
|
|
Belkin Mouse.
|
|
Chic mouse.
|
|
Cypress mouse.
|
|
Genius Niche mouse.
|
|
Kensington Mouse-in-a-Box.
|
|
Logitech wheel mouse (3 buttons).
|
|
Logitech PS/2 / USB mouse (3 buttons).
|
|
MacAlly mouse (3 buttons).
|
|
Microsoft IntelliMouse (3 buttons).
|
|
Trust Ami Mouse (3 buttons).
|
|
|
|
Printer Adapters:
|
|
ATen parallel printer adapter.
|
|
Belkin F5U002 parallel printer adapter.
|
|
Entrega USB-to-parallel printer adapter.
|
|
|
|
Scanners:
|
|
Acer Acerscan 320U, 620U, 640U, C310U, 1212U
|
|
AGFA SnapScan Touch
|
|
Avision 1200U
|
|
Epson Perfection 610, 636U/636Photo, 1200U/1200Photo, 1600
|
|
Hewlett Packard Photosmart S20
|
|
Hewlett Packard Scanjet 3300C, 4100C, 4200C, 5200C, 5300C, 6200C, 6300C
|
|
KYE ColorPage Vivid-Pro
|
|
Microtek Phantom 336CX, C6
|
|
Microtek ScanMaker V6UL, V6USL, X6U
|
|
Mustek 600 CU, 1200 CU, 1200 UB, 1200 USB
|
|
NatSemi BearPaw 1200
|
|
Primax Colorado 600u, 1200u, USB 9600, USB 19200
|
|
Primax G2-200, G2-300, G2-600, G2E-300, G2E-600
|
|
Primax ReadyScan 636i
|
|
UMAX Astra 1220U, 1236U, 2000U, 2100U, 2200U
|
|
Visioneer OneTouch 5300, 6100, 6200, 7600, 8100, 8600
|
|
|
|
Miscalleneous:
|
|
ActiveWire I/O Board.
|
|
|
|
4.4. ISDN (European DSS1 [Q.921/Q.931] protocol)
|
|
---- -------------------------------------------
|
|
|
|
Asuscom ISDNlink 128K PnP
|
|
|
|
AVM A1
|
|
AVM Fritz!Card classic
|
|
AVM Fritz!Card PCI
|
|
|
|
Creatix ISDN-S0/8
|
|
Creatix ISDN-S0/16
|
|
Creatix ISDN-S0 PnP
|
|
|
|
Dr.Neuhaus Niccy 1008
|
|
Dr.Neuhaus Niccy 1016
|
|
Dr.Neuhaus Niccy GO@ (ISA PnP)
|
|
|
|
ELSA QuickStep 1000pro ISA
|
|
ELSA MicroLink ISDN/PCI (same as ELSA QuickStep 1000pro PCI)
|
|
ELSA PCC-16
|
|
|
|
Sagem Cybermod (ISA PnP)
|
|
|
|
Sedlbauer Win Speed
|
|
|
|
Siemens I-Surf 2.0
|
|
|
|
Teles S0/8
|
|
Teles S0/16
|
|
Teles S0/16.3 (the "c" Versions - like 16.3c - are unsupported !)
|
|
Teles S0/16.3 PnP
|
|
|
|
|
|
4.5. Misc
|
|
---- ----
|
|
|
|
AST 4 port serial card using shared IRQ.
|
|
|
|
ARNET 8 port serial card using shared IRQ.
|
|
ARNET (now Digiboard) Sync 570/i high-speed serial.
|
|
|
|
Boca BB1004 4-Port serial card (Modems NOT supported)
|
|
Boca IOAT66 6-Port serial card (Modems supported)
|
|
Boca BB1008 8-Port serial card (Modems NOT supported)
|
|
Boca BB2016 16-Port serial card (Modems supported)
|
|
|
|
Cyclades Cyclom-y Serial Board.
|
|
|
|
STB 4 port card using shared IRQ.
|
|
|
|
SDL Communications Riscom/8 Serial Board.
|
|
SDL Communications RISCom/N2 and N2pci high-speed sync serial boards.
|
|
|
|
Specialix SI/XIO/SX multiport serial cards, with both the older
|
|
SIHOST2.x and the new "enhanced" (transputer based, aka JET) host cards.
|
|
ISA, EISA and PCI are supported.
|
|
|
|
Stallion multiport serial boards: EasyIO, EasyConnection 8/32 & 8/64,
|
|
ONboard 4/16 and Brumby.
|
|
|
|
HP4020, HP6020, Philips CDD2000/CDD2660 and Plasmon CD-R drives.
|
|
|
|
Bus mice
|
|
|
|
PS/2 mice
|
|
|
|
Standard PC Joystick
|
|
|
|
X-10 power controllers
|
|
|
|
GPIB and Transputer drivers.
|
|
|
|
Genius and Mustek hand scanners.
|
|
|
|
Lucent Technologies WaveLAN/IEEE 802.11 PCMCIA and ISA standard speed
|
|
(2Mbps) and turbo speed (6Mbps) wireless network adapters and workalikes
|
|
NCR WaveLAN/IEEE 802.11
|
|
Cabletron RoamAbout 802.11 DS
|
|
Compaq WL100
|
|
Corega KK Wireless LAN PCC-11
|
|
Laneed Wireless card
|
|
ELECOM Air@Hawk/LD-WL11/PCC
|
|
Farallon Skyline 11Mbps Wireless
|
|
ICOM SL-1100
|
|
Melco Airconnect WLI-PCM-L11
|
|
NEC Wireless Card CMZ-RT-WP
|
|
PLANEX GeoWave/GW-NS110
|
|
TDK LAK-CD011WL
|
|
Note: the ISA versions of these adapters are actually PCMCIA cards
|
|
combined with an ISA to PCMCIA bridge card, so both kinds of devices
|
|
work with the same driver.
|
|
|
|
Aironet 4500/4800 series 802.11 wireless adapters. The PCMCIA,
|
|
PCI and ISA adapters are all supported.
|
|
Cisco Systems Aironet 340 Series (includes 340, 341, and 342 models)
|
|
11Mbps 802.11 wireless NIC
|
|
|
|
Toshiba Mobile HDD MEHDD20A (Type II)
|
|
|
|
FAX-Modem/PC-Card
|
|
Melco IGM-PCM56K
|
|
|
|
Digital Cellular/PC-Card
|
|
Panasonic KX-PH405
|
|
|
|
|
|
4.6. Microchannel
|
|
---- ------------
|
|
|
|
Experimental support for Microchannel systems is new in FreeBSD 4.0
|
|
|
|
Drivers with support for Microchannel peripherals are:
|
|
|
|
aha: Adaptec AHA-1640 SCSI controller
|
|
bt: Buslogic BT-640A and Storage Dimensions SDC3211 SCSI controllers
|
|
ep: 3Com 3C529 network adapter
|
|
|
|
|
|
4.7. Multimedia
|
|
---- ----------
|
|
|
|
Soundcards supported by newpcm:
|
|
|
|
Advance Asound 100, 110 and Logic ALS120
|
|
Crystal Semiconductor CS461x/462x/428x
|
|
ENSONIQ AudioPCI ES1370/1371
|
|
ESS ES1868, ES1869, ES1879 and ES1888
|
|
ESS Maestro-1, Maestro-2, and Maestro-2E
|
|
ForteMedia fm801
|
|
Gravis UltraSound MAX/PnP
|
|
MSS/WSS Compatible DSPs
|
|
NeoMagic 256AV/ZX
|
|
OPTi 931/82C931
|
|
SoundBlaster, Soundblaster Pro, Soundblaster AWE-32, Soundblaster AWE-64
|
|
Trident 4DWave DX/NX
|
|
VIA Technologies VT82C686A
|
|
Yamaha DS1 and DS1e
|
|
|
|
Matrox Meteor Video frame grabber
|
|
Creative Labs Video Spigot frame grabber
|
|
Cortex1 frame grabber
|
|
Various Frame grabbers based on Brooktree Bt848 and Bt878 chip.
|