d0f32374e6
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as it might provide useful for debugging). For most mii(4) drivers it was unclear whether the PHYs driven by them actually support loopback or not. Moreover, typically loopback mode also needs to be activated on the MAC, which none of the Ethernet drivers using mii(4) implements. Given that loopback media has no real use (and obviously hardly had a chance to actually work) besides for driver development (which just loopback mode should be sufficient for though, i.e one doesn't necessary need support for loopback media) support for it is just dropped as both NetBSD and OpenBSD already did quite some time ago. - Let mii_phy_add_media() also announce the support of IFM_NONE. - Restructure the PHY entry points to use a structure of entry points instead of discrete function pointers, and extend this to include a "reset" entry point. Make sure any PHY-specific reset routine is always used, and provide one for lxtphy(4) which disables MII interrupts (as is done for a few other PHYs we have drivers for). This includes changing NIC drivers which previously just called the generic mii_phy_reset() to now actually call the PHY-specific reset routine, which might be crucial in some cases. While at it, the redundant checks in these NIC drivers for mii->mii_instance not being zero before calling the reset routines were removed because as soon as one PHY driver attaches mii->mii_instance is incremented and we hardly can end up in their media change callbacks etc if no PHY driver has attached as mii_attach() would have failed in that case and not attach a miibus(4) instance. Consequently, NIC drivers now no longer should call mii_phy_reset() directly, so it was removed from EXPORT_SYMS. - Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe(). The purpose of that function is to perform the common steps to attach a PHY driver instance and to hook it up to the miibus(4) instance and to optionally also handle the probing, addition and initialization of the supported media. So all a PHY driver without any special requirements has to do in its bus attach method is to call mii_phy_dev_attach() along with PHY-specific MIIF_* flags, a pointer to its PHY functions and the add_media set to one. All PHY drivers were updated to take advantage of mii_phy_dev_attach() as appropriate. Along with these changes the capability mask was added to the mii_softc structure so PHY drivers taking advantage of mii_phy_dev_attach() but still handling media on their own do not need to fiddle with the MII attach arguments anyway. - Keep track of the PHY offset in the mii_softc structure. This is done for compatibility with NetBSD/OpenBSD. - Keep track of the PHY's OUI, model and revision in the mii_softc structure. Several PHY drivers require this information also after attaching and previously had to wrap their own softc around mii_softc. NetBSD/OpenBSD also keep track of the model and revision on their mii_softc structure. All PHY drivers were updated to take advantage as appropriate. - Convert the mebers of the MII data structure to unsigned where appropriate. This is partly inspired by NetBSD/OpenBSD. - According to IEEE 802.3-2002 the bits actually have to be reversed when mapping an OUI to the MII ID registers. All PHY drivers and miidevs where changed as necessary. Actually this now again allows to largely share miidevs with NetBSD, which fixed this problem already 9 years ago. Consequently miidevs was synced as far as possible. - Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that weren't explicitly converted to support flow control before. It's unclear whether flow control actually works with these but typically it should and their net behavior should be more correct with these changes in place than without if the MAC driver sets MIIF_DOPAUSE. Obtained from: NetBSD (partially) Reviewed by: yongari (earlier version), silence on arch@ and net@
1523 lines
36 KiB
C
1523 lines
36 KiB
C
/*-
|
|
* Copyright (c) 2000 Berkeley Software Design, Inc.
|
|
* Copyright (c) 1997, 1998, 1999, 2000
|
|
* Bill Paul <wpaul@osd.bsdi.com>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* AMD Am79c972 fast ethernet PCI NIC driver. Datasheets are available
|
|
* from http://www.amd.com.
|
|
*
|
|
* The AMD PCnet/PCI controllers are more advanced and functional
|
|
* versions of the venerable 7990 LANCE. The PCnet/PCI chips retain
|
|
* backwards compatibility with the LANCE and thus can be made
|
|
* to work with older LANCE drivers. This is in fact how the
|
|
* PCnet/PCI chips were supported in FreeBSD originally. The trouble
|
|
* is that the PCnet/PCI devices offer several performance enhancements
|
|
* which can't be exploited in LANCE compatibility mode. Chief among
|
|
* these enhancements is the ability to perform PCI DMA operations
|
|
* using 32-bit addressing (which eliminates the need for ISA
|
|
* bounce-buffering), and special receive buffer alignment (which
|
|
* allows the receive handler to pass packets to the upper protocol
|
|
* layers without copying on both the x86 and alpha platforms).
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/socket.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_types.h>
|
|
|
|
#include <net/bpf.h>
|
|
|
|
#include <vm/vm.h> /* for vtophys */
|
|
#include <vm/pmap.h> /* for vtophys */
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
#define PCN_USEIOSPACE
|
|
|
|
#include <dev/pcn/if_pcnreg.h>
|
|
|
|
MODULE_DEPEND(pcn, pci, 1, 1, 1);
|
|
MODULE_DEPEND(pcn, ether, 1, 1, 1);
|
|
MODULE_DEPEND(pcn, miibus, 1, 1, 1);
|
|
|
|
/* "device miibus" required. See GENERIC if you get errors here. */
|
|
#include "miibus_if.h"
|
|
|
|
/*
|
|
* Various supported device vendors/types and their names.
|
|
*/
|
|
static const struct pcn_type pcn_devs[] = {
|
|
{ PCN_VENDORID, PCN_DEVICEID_PCNET, "AMD PCnet/PCI 10/100BaseTX" },
|
|
{ PCN_VENDORID, PCN_DEVICEID_HOME, "AMD PCnet/Home HomePNA" },
|
|
{ 0, 0, NULL }
|
|
};
|
|
|
|
static const struct pcn_chipid {
|
|
u_int32_t id;
|
|
const char *name;
|
|
} pcn_chipid[] = {
|
|
{ Am79C971, "Am79C971" },
|
|
{ Am79C972, "Am79C972" },
|
|
{ Am79C973, "Am79C973" },
|
|
{ Am79C978, "Am79C978" },
|
|
{ Am79C975, "Am79C975" },
|
|
{ Am79C976, "Am79C976" },
|
|
{ 0, NULL },
|
|
};
|
|
|
|
static const char *pcn_chipid_name(u_int32_t);
|
|
static u_int32_t pcn_chip_id(device_t);
|
|
static const struct pcn_type *pcn_match(u_int16_t, u_int16_t);
|
|
|
|
static u_int32_t pcn_csr_read(struct pcn_softc *, int);
|
|
static u_int16_t pcn_csr_read16(struct pcn_softc *, int);
|
|
static u_int16_t pcn_bcr_read16(struct pcn_softc *, int);
|
|
static void pcn_csr_write(struct pcn_softc *, int, int);
|
|
static u_int32_t pcn_bcr_read(struct pcn_softc *, int);
|
|
static void pcn_bcr_write(struct pcn_softc *, int, int);
|
|
|
|
static int pcn_probe(device_t);
|
|
static int pcn_attach(device_t);
|
|
static int pcn_detach(device_t);
|
|
|
|
static int pcn_newbuf(struct pcn_softc *, int, struct mbuf *);
|
|
static int pcn_encap(struct pcn_softc *, struct mbuf *, u_int32_t *);
|
|
static void pcn_rxeof(struct pcn_softc *);
|
|
static void pcn_txeof(struct pcn_softc *);
|
|
static void pcn_intr(void *);
|
|
static void pcn_tick(void *);
|
|
static void pcn_start(struct ifnet *);
|
|
static void pcn_start_locked(struct ifnet *);
|
|
static int pcn_ioctl(struct ifnet *, u_long, caddr_t);
|
|
static void pcn_init(void *);
|
|
static void pcn_init_locked(struct pcn_softc *);
|
|
static void pcn_stop(struct pcn_softc *);
|
|
static void pcn_watchdog(struct pcn_softc *);
|
|
static int pcn_shutdown(device_t);
|
|
static int pcn_ifmedia_upd(struct ifnet *);
|
|
static void pcn_ifmedia_sts(struct ifnet *, struct ifmediareq *);
|
|
|
|
static int pcn_miibus_readreg(device_t, int, int);
|
|
static int pcn_miibus_writereg(device_t, int, int, int);
|
|
static void pcn_miibus_statchg(device_t);
|
|
|
|
static void pcn_setfilt(struct ifnet *);
|
|
static void pcn_setmulti(struct pcn_softc *);
|
|
static void pcn_reset(struct pcn_softc *);
|
|
static int pcn_list_rx_init(struct pcn_softc *);
|
|
static int pcn_list_tx_init(struct pcn_softc *);
|
|
|
|
#ifdef PCN_USEIOSPACE
|
|
#define PCN_RES SYS_RES_IOPORT
|
|
#define PCN_RID PCN_PCI_LOIO
|
|
#else
|
|
#define PCN_RES SYS_RES_MEMORY
|
|
#define PCN_RID PCN_PCI_LOMEM
|
|
#endif
|
|
|
|
static device_method_t pcn_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, pcn_probe),
|
|
DEVMETHOD(device_attach, pcn_attach),
|
|
DEVMETHOD(device_detach, pcn_detach),
|
|
DEVMETHOD(device_shutdown, pcn_shutdown),
|
|
|
|
/* bus interface */
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
|
|
|
|
/* MII interface */
|
|
DEVMETHOD(miibus_readreg, pcn_miibus_readreg),
|
|
DEVMETHOD(miibus_writereg, pcn_miibus_writereg),
|
|
DEVMETHOD(miibus_statchg, pcn_miibus_statchg),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t pcn_driver = {
|
|
"pcn",
|
|
pcn_methods,
|
|
sizeof(struct pcn_softc)
|
|
};
|
|
|
|
static devclass_t pcn_devclass;
|
|
|
|
DRIVER_MODULE(pcn, pci, pcn_driver, pcn_devclass, 0, 0);
|
|
DRIVER_MODULE(miibus, pcn, miibus_driver, miibus_devclass, 0, 0);
|
|
|
|
#define PCN_CSR_SETBIT(sc, reg, x) \
|
|
pcn_csr_write(sc, reg, pcn_csr_read(sc, reg) | (x))
|
|
|
|
#define PCN_CSR_CLRBIT(sc, reg, x) \
|
|
pcn_csr_write(sc, reg, pcn_csr_read(sc, reg) & ~(x))
|
|
|
|
#define PCN_BCR_SETBIT(sc, reg, x) \
|
|
pcn_bcr_write(sc, reg, pcn_bcr_read(sc, reg) | (x))
|
|
|
|
#define PCN_BCR_CLRBIT(sc, reg, x) \
|
|
pcn_bcr_write(sc, reg, pcn_bcr_read(sc, reg) & ~(x))
|
|
|
|
static u_int32_t
|
|
pcn_csr_read(sc, reg)
|
|
struct pcn_softc *sc;
|
|
int reg;
|
|
{
|
|
CSR_WRITE_4(sc, PCN_IO32_RAP, reg);
|
|
return(CSR_READ_4(sc, PCN_IO32_RDP));
|
|
}
|
|
|
|
static u_int16_t
|
|
pcn_csr_read16(sc, reg)
|
|
struct pcn_softc *sc;
|
|
int reg;
|
|
{
|
|
CSR_WRITE_2(sc, PCN_IO16_RAP, reg);
|
|
return(CSR_READ_2(sc, PCN_IO16_RDP));
|
|
}
|
|
|
|
static void
|
|
pcn_csr_write(sc, reg, val)
|
|
struct pcn_softc *sc;
|
|
int reg;
|
|
int val;
|
|
{
|
|
CSR_WRITE_4(sc, PCN_IO32_RAP, reg);
|
|
CSR_WRITE_4(sc, PCN_IO32_RDP, val);
|
|
return;
|
|
}
|
|
|
|
static u_int32_t
|
|
pcn_bcr_read(sc, reg)
|
|
struct pcn_softc *sc;
|
|
int reg;
|
|
{
|
|
CSR_WRITE_4(sc, PCN_IO32_RAP, reg);
|
|
return(CSR_READ_4(sc, PCN_IO32_BDP));
|
|
}
|
|
|
|
static u_int16_t
|
|
pcn_bcr_read16(sc, reg)
|
|
struct pcn_softc *sc;
|
|
int reg;
|
|
{
|
|
CSR_WRITE_2(sc, PCN_IO16_RAP, reg);
|
|
return(CSR_READ_2(sc, PCN_IO16_BDP));
|
|
}
|
|
|
|
static void
|
|
pcn_bcr_write(sc, reg, val)
|
|
struct pcn_softc *sc;
|
|
int reg;
|
|
int val;
|
|
{
|
|
CSR_WRITE_4(sc, PCN_IO32_RAP, reg);
|
|
CSR_WRITE_4(sc, PCN_IO32_BDP, val);
|
|
return;
|
|
}
|
|
|
|
static int
|
|
pcn_miibus_readreg(dev, phy, reg)
|
|
device_t dev;
|
|
int phy, reg;
|
|
{
|
|
struct pcn_softc *sc;
|
|
int val;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
/*
|
|
* At least Am79C971 with DP83840A wedge when isolating the
|
|
* external PHY so we can't allow multiple external PHYs.
|
|
* There are cards that use Am79C971 with both the internal
|
|
* and an external PHY though.
|
|
* For internal PHYs it doesn't really matter whether we can
|
|
* isolate the remaining internal and the external ones in
|
|
* the PHY drivers as the internal PHYs have to be enabled
|
|
* individually in PCN_BCR_PHYSEL, PCN_CSR_MODE, etc.
|
|
* With Am79C97{3,5,8} we don't support switching beetween
|
|
* the internal and external PHYs, yet, so we can't allow
|
|
* multiple PHYs with these either.
|
|
* Am79C97{2,6} actually only support external PHYs (not
|
|
* connectable internal ones respond at the usual addresses,
|
|
* which don't hurt if we let them show up on the bus) and
|
|
* isolating them works.
|
|
*/
|
|
if (((sc->pcn_type == Am79C971 && phy != PCN_PHYAD_10BT) ||
|
|
sc->pcn_type == Am79C973 || sc->pcn_type == Am79C975 ||
|
|
sc->pcn_type == Am79C978) && sc->pcn_extphyaddr != -1 &&
|
|
phy != sc->pcn_extphyaddr)
|
|
return(0);
|
|
|
|
pcn_bcr_write(sc, PCN_BCR_MIIADDR, reg | (phy << 5));
|
|
val = pcn_bcr_read(sc, PCN_BCR_MIIDATA) & 0xFFFF;
|
|
if (val == 0xFFFF)
|
|
return(0);
|
|
|
|
if (((sc->pcn_type == Am79C971 && phy != PCN_PHYAD_10BT) ||
|
|
sc->pcn_type == Am79C973 || sc->pcn_type == Am79C975 ||
|
|
sc->pcn_type == Am79C978) && sc->pcn_extphyaddr == -1)
|
|
sc->pcn_extphyaddr = phy;
|
|
|
|
return(val);
|
|
}
|
|
|
|
static int
|
|
pcn_miibus_writereg(dev, phy, reg, data)
|
|
device_t dev;
|
|
int phy, reg, data;
|
|
{
|
|
struct pcn_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
pcn_bcr_write(sc, PCN_BCR_MIIADDR, reg | (phy << 5));
|
|
pcn_bcr_write(sc, PCN_BCR_MIIDATA, data);
|
|
|
|
return(0);
|
|
}
|
|
|
|
static void
|
|
pcn_miibus_statchg(dev)
|
|
device_t dev;
|
|
{
|
|
struct pcn_softc *sc;
|
|
struct mii_data *mii;
|
|
|
|
sc = device_get_softc(dev);
|
|
mii = device_get_softc(sc->pcn_miibus);
|
|
|
|
if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) {
|
|
PCN_BCR_SETBIT(sc, PCN_BCR_DUPLEX, PCN_DUPLEX_FDEN);
|
|
} else {
|
|
PCN_BCR_CLRBIT(sc, PCN_BCR_DUPLEX, PCN_DUPLEX_FDEN);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
pcn_setmulti(sc)
|
|
struct pcn_softc *sc;
|
|
{
|
|
struct ifnet *ifp;
|
|
struct ifmultiaddr *ifma;
|
|
u_int32_t h, i;
|
|
u_int16_t hashes[4] = { 0, 0, 0, 0 };
|
|
|
|
ifp = sc->pcn_ifp;
|
|
|
|
PCN_CSR_SETBIT(sc, PCN_CSR_EXTCTL1, PCN_EXTCTL1_SPND);
|
|
|
|
if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
|
|
for (i = 0; i < 4; i++)
|
|
pcn_csr_write(sc, PCN_CSR_MAR0 + i, 0xFFFF);
|
|
PCN_CSR_CLRBIT(sc, PCN_CSR_EXTCTL1, PCN_EXTCTL1_SPND);
|
|
return;
|
|
}
|
|
|
|
/* first, zot all the existing hash bits */
|
|
for (i = 0; i < 4; i++)
|
|
pcn_csr_write(sc, PCN_CSR_MAR0 + i, 0);
|
|
|
|
/* now program new ones */
|
|
if_maddr_rlock(ifp);
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
h = ether_crc32_le(LLADDR((struct sockaddr_dl *)
|
|
ifma->ifma_addr), ETHER_ADDR_LEN) >> 26;
|
|
hashes[h >> 4] |= 1 << (h & 0xF);
|
|
}
|
|
if_maddr_runlock(ifp);
|
|
|
|
for (i = 0; i < 4; i++)
|
|
pcn_csr_write(sc, PCN_CSR_MAR0 + i, hashes[i]);
|
|
|
|
PCN_CSR_CLRBIT(sc, PCN_CSR_EXTCTL1, PCN_EXTCTL1_SPND);
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
pcn_reset(sc)
|
|
struct pcn_softc *sc;
|
|
{
|
|
/*
|
|
* Issue a reset by reading from the RESET register.
|
|
* Note that we don't know if the chip is operating in
|
|
* 16-bit or 32-bit mode at this point, so we attempt
|
|
* to reset the chip both ways. If one fails, the other
|
|
* will succeed.
|
|
*/
|
|
CSR_READ_2(sc, PCN_IO16_RESET);
|
|
CSR_READ_4(sc, PCN_IO32_RESET);
|
|
|
|
/* Wait a little while for the chip to get its brains in order. */
|
|
DELAY(1000);
|
|
|
|
/* Select 32-bit (DWIO) mode */
|
|
CSR_WRITE_4(sc, PCN_IO32_RDP, 0);
|
|
|
|
/* Select software style 3. */
|
|
pcn_bcr_write(sc, PCN_BCR_SSTYLE, PCN_SWSTYLE_PCNETPCI_BURST);
|
|
|
|
return;
|
|
}
|
|
|
|
static const char *
|
|
pcn_chipid_name(u_int32_t id)
|
|
{
|
|
const struct pcn_chipid *p;
|
|
|
|
p = pcn_chipid;
|
|
while (p->name) {
|
|
if (id == p->id)
|
|
return (p->name);
|
|
p++;
|
|
}
|
|
return ("Unknown");
|
|
}
|
|
|
|
static u_int32_t
|
|
pcn_chip_id(device_t dev)
|
|
{
|
|
struct pcn_softc *sc;
|
|
u_int32_t chip_id;
|
|
|
|
sc = device_get_softc(dev);
|
|
/*
|
|
* Note: we can *NOT* put the chip into
|
|
* 32-bit mode yet. The le(4) driver will only
|
|
* work in 16-bit mode, and once the chip
|
|
* goes into 32-bit mode, the only way to
|
|
* get it out again is with a hardware reset.
|
|
* So if pcn_probe() is called before the
|
|
* le(4) driver's probe routine, the chip will
|
|
* be locked into 32-bit operation and the
|
|
* le(4) driver will be unable to attach to it.
|
|
* Note II: if the chip happens to already
|
|
* be in 32-bit mode, we still need to check
|
|
* the chip ID, but first we have to detect
|
|
* 32-bit mode using only 16-bit operations.
|
|
* The safest way to do this is to read the
|
|
* PCI subsystem ID from BCR23/24 and compare
|
|
* that with the value read from PCI config
|
|
* space.
|
|
*/
|
|
chip_id = pcn_bcr_read16(sc, PCN_BCR_PCISUBSYSID);
|
|
chip_id <<= 16;
|
|
chip_id |= pcn_bcr_read16(sc, PCN_BCR_PCISUBVENID);
|
|
/*
|
|
* Note III: the test for 0x10001000 is a hack to
|
|
* pacify VMware, who's pseudo-PCnet interface is
|
|
* broken. Reading the subsystem register from PCI
|
|
* config space yields 0x00000000 while reading the
|
|
* same value from I/O space yields 0x10001000. It's
|
|
* not supposed to be that way.
|
|
*/
|
|
if (chip_id == pci_read_config(dev,
|
|
PCIR_SUBVEND_0, 4) || chip_id == 0x10001000) {
|
|
/* We're in 16-bit mode. */
|
|
chip_id = pcn_csr_read16(sc, PCN_CSR_CHIPID1);
|
|
chip_id <<= 16;
|
|
chip_id |= pcn_csr_read16(sc, PCN_CSR_CHIPID0);
|
|
} else {
|
|
/* We're in 32-bit mode. */
|
|
chip_id = pcn_csr_read(sc, PCN_CSR_CHIPID1);
|
|
chip_id <<= 16;
|
|
chip_id |= pcn_csr_read(sc, PCN_CSR_CHIPID0);
|
|
}
|
|
|
|
return (chip_id);
|
|
}
|
|
|
|
static const struct pcn_type *
|
|
pcn_match(u_int16_t vid, u_int16_t did)
|
|
{
|
|
const struct pcn_type *t;
|
|
|
|
t = pcn_devs;
|
|
while (t->pcn_name != NULL) {
|
|
if ((vid == t->pcn_vid) && (did == t->pcn_did))
|
|
return (t);
|
|
t++;
|
|
}
|
|
return (NULL);
|
|
}
|
|
|
|
/*
|
|
* Probe for an AMD chip. Check the PCI vendor and device
|
|
* IDs against our list and return a device name if we find a match.
|
|
*/
|
|
static int
|
|
pcn_probe(dev)
|
|
device_t dev;
|
|
{
|
|
const struct pcn_type *t;
|
|
struct pcn_softc *sc;
|
|
int rid;
|
|
u_int32_t chip_id;
|
|
|
|
t = pcn_match(pci_get_vendor(dev), pci_get_device(dev));
|
|
if (t == NULL)
|
|
return (ENXIO);
|
|
sc = device_get_softc(dev);
|
|
|
|
/*
|
|
* Temporarily map the I/O space so we can read the chip ID register.
|
|
*/
|
|
rid = PCN_RID;
|
|
sc->pcn_res = bus_alloc_resource_any(dev, PCN_RES, &rid, RF_ACTIVE);
|
|
if (sc->pcn_res == NULL) {
|
|
device_printf(dev, "couldn't map ports/memory\n");
|
|
return(ENXIO);
|
|
}
|
|
sc->pcn_btag = rman_get_bustag(sc->pcn_res);
|
|
sc->pcn_bhandle = rman_get_bushandle(sc->pcn_res);
|
|
|
|
chip_id = pcn_chip_id(dev);
|
|
|
|
bus_release_resource(dev, PCN_RES, PCN_RID, sc->pcn_res);
|
|
|
|
switch((chip_id >> 12) & PART_MASK) {
|
|
case Am79C971:
|
|
case Am79C972:
|
|
case Am79C973:
|
|
case Am79C975:
|
|
case Am79C976:
|
|
case Am79C978:
|
|
break;
|
|
default:
|
|
return(ENXIO);
|
|
}
|
|
device_set_desc(dev, t->pcn_name);
|
|
return(BUS_PROBE_DEFAULT);
|
|
}
|
|
|
|
/*
|
|
* Attach the interface. Allocate softc structures, do ifmedia
|
|
* setup and ethernet/BPF attach.
|
|
*/
|
|
static int
|
|
pcn_attach(dev)
|
|
device_t dev;
|
|
{
|
|
u_int32_t eaddr[2];
|
|
struct pcn_softc *sc;
|
|
struct mii_data *mii;
|
|
struct mii_softc *miisc;
|
|
struct ifnet *ifp;
|
|
int error = 0, rid;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
/* Initialize our mutex. */
|
|
mtx_init(&sc->pcn_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
|
|
MTX_DEF);
|
|
/*
|
|
* Map control/status registers.
|
|
*/
|
|
pci_enable_busmaster(dev);
|
|
|
|
/* Retrieve the chip ID */
|
|
sc->pcn_type = (pcn_chip_id(dev) >> 12) & PART_MASK;
|
|
device_printf(dev, "Chip ID %04x (%s)\n",
|
|
sc->pcn_type, pcn_chipid_name(sc->pcn_type));
|
|
|
|
rid = PCN_RID;
|
|
sc->pcn_res = bus_alloc_resource_any(dev, PCN_RES, &rid, RF_ACTIVE);
|
|
|
|
if (sc->pcn_res == NULL) {
|
|
device_printf(dev, "couldn't map ports/memory\n");
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
sc->pcn_btag = rman_get_bustag(sc->pcn_res);
|
|
sc->pcn_bhandle = rman_get_bushandle(sc->pcn_res);
|
|
|
|
/* Allocate interrupt */
|
|
rid = 0;
|
|
sc->pcn_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
|
|
RF_SHAREABLE | RF_ACTIVE);
|
|
|
|
if (sc->pcn_irq == NULL) {
|
|
device_printf(dev, "couldn't map interrupt\n");
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
/* Reset the adapter. */
|
|
pcn_reset(sc);
|
|
|
|
/*
|
|
* Get station address from the EEPROM.
|
|
*/
|
|
eaddr[0] = CSR_READ_4(sc, PCN_IO32_APROM00);
|
|
eaddr[1] = CSR_READ_4(sc, PCN_IO32_APROM01);
|
|
|
|
callout_init_mtx(&sc->pcn_stat_callout, &sc->pcn_mtx, 0);
|
|
|
|
sc->pcn_ldata = contigmalloc(sizeof(struct pcn_list_data), M_DEVBUF,
|
|
M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0);
|
|
|
|
if (sc->pcn_ldata == NULL) {
|
|
device_printf(dev, "no memory for list buffers!\n");
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
bzero(sc->pcn_ldata, sizeof(struct pcn_list_data));
|
|
|
|
ifp = sc->pcn_ifp = if_alloc(IFT_ETHER);
|
|
if (ifp == NULL) {
|
|
device_printf(dev, "can not if_alloc()\n");
|
|
error = ENOSPC;
|
|
goto fail;
|
|
}
|
|
ifp->if_softc = sc;
|
|
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = pcn_ioctl;
|
|
ifp->if_start = pcn_start;
|
|
ifp->if_init = pcn_init;
|
|
ifp->if_snd.ifq_maxlen = PCN_TX_LIST_CNT - 1;
|
|
|
|
/*
|
|
* Do MII setup.
|
|
* See the comment in pcn_miibus_readreg() for why we can't
|
|
* universally pass MIIF_NOISOLATE here.
|
|
*/
|
|
sc->pcn_extphyaddr = -1;
|
|
error = mii_attach(dev, &sc->pcn_miibus, ifp, pcn_ifmedia_upd,
|
|
pcn_ifmedia_sts, BMSR_DEFCAPMASK, MII_PHY_ANY, MII_OFFSET_ANY, 0);
|
|
if (error != 0) {
|
|
device_printf(dev, "attaching PHYs failed\n");
|
|
goto fail;
|
|
}
|
|
/*
|
|
* Record the media instances of internal PHYs, which map the
|
|
* built-in interfaces to the MII, so we can set the active
|
|
* PHY/port based on the currently selected media.
|
|
*/
|
|
sc->pcn_inst_10bt = -1;
|
|
mii = device_get_softc(sc->pcn_miibus);
|
|
LIST_FOREACH(miisc, &mii->mii_phys, mii_list) {
|
|
switch (miisc->mii_phy) {
|
|
case PCN_PHYAD_10BT:
|
|
sc->pcn_inst_10bt = miisc->mii_inst;
|
|
break;
|
|
/*
|
|
* XXX deal with the Am79C97{3,5} internal 100baseT
|
|
* and the Am79C978 internal HomePNA PHYs.
|
|
*/
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Call MI attach routine.
|
|
*/
|
|
ether_ifattach(ifp, (u_int8_t *) eaddr);
|
|
|
|
/* Hook interrupt last to avoid having to lock softc */
|
|
error = bus_setup_intr(dev, sc->pcn_irq, INTR_TYPE_NET | INTR_MPSAFE,
|
|
NULL, pcn_intr, sc, &sc->pcn_intrhand);
|
|
|
|
if (error) {
|
|
device_printf(dev, "couldn't set up irq\n");
|
|
ether_ifdetach(ifp);
|
|
goto fail;
|
|
}
|
|
|
|
fail:
|
|
if (error)
|
|
pcn_detach(dev);
|
|
|
|
return(error);
|
|
}
|
|
|
|
/*
|
|
* Shutdown hardware and free up resources. This can be called any
|
|
* time after the mutex has been initialized. It is called in both
|
|
* the error case in attach and the normal detach case so it needs
|
|
* to be careful about only freeing resources that have actually been
|
|
* allocated.
|
|
*/
|
|
static int
|
|
pcn_detach(dev)
|
|
device_t dev;
|
|
{
|
|
struct pcn_softc *sc;
|
|
struct ifnet *ifp;
|
|
|
|
sc = device_get_softc(dev);
|
|
ifp = sc->pcn_ifp;
|
|
|
|
KASSERT(mtx_initialized(&sc->pcn_mtx), ("pcn mutex not initialized"));
|
|
|
|
/* These should only be active if attach succeeded */
|
|
if (device_is_attached(dev)) {
|
|
PCN_LOCK(sc);
|
|
pcn_reset(sc);
|
|
pcn_stop(sc);
|
|
PCN_UNLOCK(sc);
|
|
callout_drain(&sc->pcn_stat_callout);
|
|
ether_ifdetach(ifp);
|
|
}
|
|
if (sc->pcn_miibus)
|
|
device_delete_child(dev, sc->pcn_miibus);
|
|
bus_generic_detach(dev);
|
|
|
|
if (sc->pcn_intrhand)
|
|
bus_teardown_intr(dev, sc->pcn_irq, sc->pcn_intrhand);
|
|
if (sc->pcn_irq)
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->pcn_irq);
|
|
if (sc->pcn_res)
|
|
bus_release_resource(dev, PCN_RES, PCN_RID, sc->pcn_res);
|
|
|
|
if (ifp)
|
|
if_free(ifp);
|
|
|
|
if (sc->pcn_ldata) {
|
|
contigfree(sc->pcn_ldata, sizeof(struct pcn_list_data),
|
|
M_DEVBUF);
|
|
}
|
|
|
|
mtx_destroy(&sc->pcn_mtx);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Initialize the transmit descriptors.
|
|
*/
|
|
static int
|
|
pcn_list_tx_init(sc)
|
|
struct pcn_softc *sc;
|
|
{
|
|
struct pcn_list_data *ld;
|
|
struct pcn_ring_data *cd;
|
|
int i;
|
|
|
|
cd = &sc->pcn_cdata;
|
|
ld = sc->pcn_ldata;
|
|
|
|
for (i = 0; i < PCN_TX_LIST_CNT; i++) {
|
|
cd->pcn_tx_chain[i] = NULL;
|
|
ld->pcn_tx_list[i].pcn_tbaddr = 0;
|
|
ld->pcn_tx_list[i].pcn_txctl = 0;
|
|
ld->pcn_tx_list[i].pcn_txstat = 0;
|
|
}
|
|
|
|
cd->pcn_tx_prod = cd->pcn_tx_cons = cd->pcn_tx_cnt = 0;
|
|
|
|
return(0);
|
|
}
|
|
|
|
|
|
/*
|
|
* Initialize the RX descriptors and allocate mbufs for them.
|
|
*/
|
|
static int
|
|
pcn_list_rx_init(sc)
|
|
struct pcn_softc *sc;
|
|
{
|
|
struct pcn_ring_data *cd;
|
|
int i;
|
|
|
|
cd = &sc->pcn_cdata;
|
|
|
|
for (i = 0; i < PCN_RX_LIST_CNT; i++) {
|
|
if (pcn_newbuf(sc, i, NULL) == ENOBUFS)
|
|
return(ENOBUFS);
|
|
}
|
|
|
|
cd->pcn_rx_prod = 0;
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Initialize an RX descriptor and attach an MBUF cluster.
|
|
*/
|
|
static int
|
|
pcn_newbuf(sc, idx, m)
|
|
struct pcn_softc *sc;
|
|
int idx;
|
|
struct mbuf *m;
|
|
{
|
|
struct mbuf *m_new = NULL;
|
|
struct pcn_rx_desc *c;
|
|
|
|
c = &sc->pcn_ldata->pcn_rx_list[idx];
|
|
|
|
if (m == NULL) {
|
|
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
|
|
if (m_new == NULL)
|
|
return(ENOBUFS);
|
|
|
|
MCLGET(m_new, M_DONTWAIT);
|
|
if (!(m_new->m_flags & M_EXT)) {
|
|
m_freem(m_new);
|
|
return(ENOBUFS);
|
|
}
|
|
m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
|
|
} else {
|
|
m_new = m;
|
|
m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
|
|
m_new->m_data = m_new->m_ext.ext_buf;
|
|
}
|
|
|
|
m_adj(m_new, ETHER_ALIGN);
|
|
|
|
sc->pcn_cdata.pcn_rx_chain[idx] = m_new;
|
|
c->pcn_rbaddr = vtophys(mtod(m_new, caddr_t));
|
|
c->pcn_bufsz = (~(PCN_RXLEN) + 1) & PCN_RXLEN_BUFSZ;
|
|
c->pcn_bufsz |= PCN_RXLEN_MBO;
|
|
c->pcn_rxstat = PCN_RXSTAT_STP|PCN_RXSTAT_ENP|PCN_RXSTAT_OWN;
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* A frame has been uploaded: pass the resulting mbuf chain up to
|
|
* the higher level protocols.
|
|
*/
|
|
static void
|
|
pcn_rxeof(sc)
|
|
struct pcn_softc *sc;
|
|
{
|
|
struct mbuf *m;
|
|
struct ifnet *ifp;
|
|
struct pcn_rx_desc *cur_rx;
|
|
int i;
|
|
|
|
PCN_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->pcn_ifp;
|
|
i = sc->pcn_cdata.pcn_rx_prod;
|
|
|
|
while(PCN_OWN_RXDESC(&sc->pcn_ldata->pcn_rx_list[i])) {
|
|
cur_rx = &sc->pcn_ldata->pcn_rx_list[i];
|
|
m = sc->pcn_cdata.pcn_rx_chain[i];
|
|
sc->pcn_cdata.pcn_rx_chain[i] = NULL;
|
|
|
|
/*
|
|
* If an error occurs, update stats, clear the
|
|
* status word and leave the mbuf cluster in place:
|
|
* it should simply get re-used next time this descriptor
|
|
* comes up in the ring.
|
|
*/
|
|
if (cur_rx->pcn_rxstat & PCN_RXSTAT_ERR) {
|
|
ifp->if_ierrors++;
|
|
pcn_newbuf(sc, i, m);
|
|
PCN_INC(i, PCN_RX_LIST_CNT);
|
|
continue;
|
|
}
|
|
|
|
if (pcn_newbuf(sc, i, NULL)) {
|
|
/* Ran out of mbufs; recycle this one. */
|
|
pcn_newbuf(sc, i, m);
|
|
ifp->if_ierrors++;
|
|
PCN_INC(i, PCN_RX_LIST_CNT);
|
|
continue;
|
|
}
|
|
|
|
PCN_INC(i, PCN_RX_LIST_CNT);
|
|
|
|
/* No errors; receive the packet. */
|
|
ifp->if_ipackets++;
|
|
m->m_len = m->m_pkthdr.len =
|
|
cur_rx->pcn_rxlen - ETHER_CRC_LEN;
|
|
m->m_pkthdr.rcvif = ifp;
|
|
|
|
PCN_UNLOCK(sc);
|
|
(*ifp->if_input)(ifp, m);
|
|
PCN_LOCK(sc);
|
|
}
|
|
|
|
sc->pcn_cdata.pcn_rx_prod = i;
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* A frame was downloaded to the chip. It's safe for us to clean up
|
|
* the list buffers.
|
|
*/
|
|
|
|
static void
|
|
pcn_txeof(sc)
|
|
struct pcn_softc *sc;
|
|
{
|
|
struct pcn_tx_desc *cur_tx = NULL;
|
|
struct ifnet *ifp;
|
|
u_int32_t idx;
|
|
|
|
ifp = sc->pcn_ifp;
|
|
|
|
/*
|
|
* Go through our tx list and free mbufs for those
|
|
* frames that have been transmitted.
|
|
*/
|
|
idx = sc->pcn_cdata.pcn_tx_cons;
|
|
while (idx != sc->pcn_cdata.pcn_tx_prod) {
|
|
cur_tx = &sc->pcn_ldata->pcn_tx_list[idx];
|
|
|
|
if (!PCN_OWN_TXDESC(cur_tx))
|
|
break;
|
|
|
|
if (!(cur_tx->pcn_txctl & PCN_TXCTL_ENP)) {
|
|
sc->pcn_cdata.pcn_tx_cnt--;
|
|
PCN_INC(idx, PCN_TX_LIST_CNT);
|
|
continue;
|
|
}
|
|
|
|
if (cur_tx->pcn_txctl & PCN_TXCTL_ERR) {
|
|
ifp->if_oerrors++;
|
|
if (cur_tx->pcn_txstat & PCN_TXSTAT_EXDEF)
|
|
ifp->if_collisions++;
|
|
if (cur_tx->pcn_txstat & PCN_TXSTAT_RTRY)
|
|
ifp->if_collisions++;
|
|
}
|
|
|
|
ifp->if_collisions +=
|
|
cur_tx->pcn_txstat & PCN_TXSTAT_TRC;
|
|
|
|
ifp->if_opackets++;
|
|
if (sc->pcn_cdata.pcn_tx_chain[idx] != NULL) {
|
|
m_freem(sc->pcn_cdata.pcn_tx_chain[idx]);
|
|
sc->pcn_cdata.pcn_tx_chain[idx] = NULL;
|
|
}
|
|
|
|
sc->pcn_cdata.pcn_tx_cnt--;
|
|
PCN_INC(idx, PCN_TX_LIST_CNT);
|
|
}
|
|
|
|
if (idx != sc->pcn_cdata.pcn_tx_cons) {
|
|
/* Some buffers have been freed. */
|
|
sc->pcn_cdata.pcn_tx_cons = idx;
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
}
|
|
sc->pcn_timer = (sc->pcn_cdata.pcn_tx_cnt == 0) ? 0 : 5;
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
pcn_tick(xsc)
|
|
void *xsc;
|
|
{
|
|
struct pcn_softc *sc;
|
|
struct mii_data *mii;
|
|
struct ifnet *ifp;
|
|
|
|
sc = xsc;
|
|
ifp = sc->pcn_ifp;
|
|
PCN_LOCK_ASSERT(sc);
|
|
|
|
mii = device_get_softc(sc->pcn_miibus);
|
|
mii_tick(mii);
|
|
|
|
/* link just died */
|
|
if (sc->pcn_link & !(mii->mii_media_status & IFM_ACTIVE))
|
|
sc->pcn_link = 0;
|
|
|
|
/* link just came up, restart */
|
|
if (!sc->pcn_link && mii->mii_media_status & IFM_ACTIVE &&
|
|
IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
|
|
sc->pcn_link++;
|
|
if (ifp->if_snd.ifq_head != NULL)
|
|
pcn_start_locked(ifp);
|
|
}
|
|
|
|
if (sc->pcn_timer > 0 && --sc->pcn_timer == 0)
|
|
pcn_watchdog(sc);
|
|
callout_reset(&sc->pcn_stat_callout, hz, pcn_tick, sc);
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
pcn_intr(arg)
|
|
void *arg;
|
|
{
|
|
struct pcn_softc *sc;
|
|
struct ifnet *ifp;
|
|
u_int32_t status;
|
|
|
|
sc = arg;
|
|
ifp = sc->pcn_ifp;
|
|
|
|
PCN_LOCK(sc);
|
|
|
|
/* Suppress unwanted interrupts */
|
|
if (!(ifp->if_flags & IFF_UP)) {
|
|
pcn_stop(sc);
|
|
PCN_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
CSR_WRITE_4(sc, PCN_IO32_RAP, PCN_CSR_CSR);
|
|
|
|
while ((status = CSR_READ_4(sc, PCN_IO32_RDP)) & PCN_CSR_INTR) {
|
|
CSR_WRITE_4(sc, PCN_IO32_RDP, status);
|
|
|
|
if (status & PCN_CSR_RINT)
|
|
pcn_rxeof(sc);
|
|
|
|
if (status & PCN_CSR_TINT)
|
|
pcn_txeof(sc);
|
|
|
|
if (status & PCN_CSR_ERR) {
|
|
pcn_init_locked(sc);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (ifp->if_snd.ifq_head != NULL)
|
|
pcn_start_locked(ifp);
|
|
|
|
PCN_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Encapsulate an mbuf chain in a descriptor by coupling the mbuf data
|
|
* pointers to the fragment pointers.
|
|
*/
|
|
static int
|
|
pcn_encap(sc, m_head, txidx)
|
|
struct pcn_softc *sc;
|
|
struct mbuf *m_head;
|
|
u_int32_t *txidx;
|
|
{
|
|
struct pcn_tx_desc *f = NULL;
|
|
struct mbuf *m;
|
|
int frag, cur, cnt = 0;
|
|
|
|
/*
|
|
* Start packing the mbufs in this chain into
|
|
* the fragment pointers. Stop when we run out
|
|
* of fragments or hit the end of the mbuf chain.
|
|
*/
|
|
m = m_head;
|
|
cur = frag = *txidx;
|
|
|
|
for (m = m_head; m != NULL; m = m->m_next) {
|
|
if (m->m_len == 0)
|
|
continue;
|
|
|
|
if ((PCN_TX_LIST_CNT - (sc->pcn_cdata.pcn_tx_cnt + cnt)) < 2)
|
|
return(ENOBUFS);
|
|
f = &sc->pcn_ldata->pcn_tx_list[frag];
|
|
f->pcn_txctl = (~(m->m_len) + 1) & PCN_TXCTL_BUFSZ;
|
|
f->pcn_txctl |= PCN_TXCTL_MBO;
|
|
f->pcn_tbaddr = vtophys(mtod(m, vm_offset_t));
|
|
if (cnt == 0)
|
|
f->pcn_txctl |= PCN_TXCTL_STP;
|
|
else
|
|
f->pcn_txctl |= PCN_TXCTL_OWN;
|
|
cur = frag;
|
|
PCN_INC(frag, PCN_TX_LIST_CNT);
|
|
cnt++;
|
|
}
|
|
|
|
if (m != NULL)
|
|
return(ENOBUFS);
|
|
|
|
sc->pcn_cdata.pcn_tx_chain[cur] = m_head;
|
|
sc->pcn_ldata->pcn_tx_list[cur].pcn_txctl |=
|
|
PCN_TXCTL_ENP|PCN_TXCTL_ADD_FCS|PCN_TXCTL_MORE_LTINT;
|
|
sc->pcn_ldata->pcn_tx_list[*txidx].pcn_txctl |= PCN_TXCTL_OWN;
|
|
sc->pcn_cdata.pcn_tx_cnt += cnt;
|
|
*txidx = frag;
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Main transmit routine. To avoid having to do mbuf copies, we put pointers
|
|
* to the mbuf data regions directly in the transmit lists. We also save a
|
|
* copy of the pointers since the transmit list fragment pointers are
|
|
* physical addresses.
|
|
*/
|
|
static void
|
|
pcn_start(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct pcn_softc *sc;
|
|
|
|
sc = ifp->if_softc;
|
|
PCN_LOCK(sc);
|
|
pcn_start_locked(ifp);
|
|
PCN_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
pcn_start_locked(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct pcn_softc *sc;
|
|
struct mbuf *m_head = NULL;
|
|
u_int32_t idx;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
PCN_LOCK_ASSERT(sc);
|
|
|
|
if (!sc->pcn_link)
|
|
return;
|
|
|
|
idx = sc->pcn_cdata.pcn_tx_prod;
|
|
|
|
if (ifp->if_drv_flags & IFF_DRV_OACTIVE)
|
|
return;
|
|
|
|
while(sc->pcn_cdata.pcn_tx_chain[idx] == NULL) {
|
|
IF_DEQUEUE(&ifp->if_snd, m_head);
|
|
if (m_head == NULL)
|
|
break;
|
|
|
|
if (pcn_encap(sc, m_head, &idx)) {
|
|
IF_PREPEND(&ifp->if_snd, m_head);
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* If there's a BPF listener, bounce a copy of this frame
|
|
* to him.
|
|
*/
|
|
BPF_MTAP(ifp, m_head);
|
|
|
|
}
|
|
|
|
/* Transmit */
|
|
sc->pcn_cdata.pcn_tx_prod = idx;
|
|
pcn_csr_write(sc, PCN_CSR_CSR, PCN_CSR_TX|PCN_CSR_INTEN);
|
|
|
|
/*
|
|
* Set a timeout in case the chip goes out to lunch.
|
|
*/
|
|
sc->pcn_timer = 5;
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
pcn_setfilt(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct pcn_softc *sc;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
/* If we want promiscuous mode, set the allframes bit. */
|
|
if (ifp->if_flags & IFF_PROMISC) {
|
|
PCN_CSR_SETBIT(sc, PCN_CSR_MODE, PCN_MODE_PROMISC);
|
|
} else {
|
|
PCN_CSR_CLRBIT(sc, PCN_CSR_MODE, PCN_MODE_PROMISC);
|
|
}
|
|
|
|
/* Set the capture broadcast bit to capture broadcast frames. */
|
|
if (ifp->if_flags & IFF_BROADCAST) {
|
|
PCN_CSR_CLRBIT(sc, PCN_CSR_MODE, PCN_MODE_RXNOBROAD);
|
|
} else {
|
|
PCN_CSR_SETBIT(sc, PCN_CSR_MODE, PCN_MODE_RXNOBROAD);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
pcn_init(xsc)
|
|
void *xsc;
|
|
{
|
|
struct pcn_softc *sc = xsc;
|
|
|
|
PCN_LOCK(sc);
|
|
pcn_init_locked(sc);
|
|
PCN_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
pcn_init_locked(sc)
|
|
struct pcn_softc *sc;
|
|
{
|
|
struct ifnet *ifp = sc->pcn_ifp;
|
|
struct mii_data *mii = NULL;
|
|
struct ifmedia_entry *ife;
|
|
|
|
PCN_LOCK_ASSERT(sc);
|
|
|
|
/*
|
|
* Cancel pending I/O and free all RX/TX buffers.
|
|
*/
|
|
pcn_stop(sc);
|
|
pcn_reset(sc);
|
|
|
|
mii = device_get_softc(sc->pcn_miibus);
|
|
ife = mii->mii_media.ifm_cur;
|
|
|
|
/* Set MAC address */
|
|
pcn_csr_write(sc, PCN_CSR_PAR0,
|
|
((u_int16_t *)IF_LLADDR(sc->pcn_ifp))[0]);
|
|
pcn_csr_write(sc, PCN_CSR_PAR1,
|
|
((u_int16_t *)IF_LLADDR(sc->pcn_ifp))[1]);
|
|
pcn_csr_write(sc, PCN_CSR_PAR2,
|
|
((u_int16_t *)IF_LLADDR(sc->pcn_ifp))[2]);
|
|
|
|
/* Init circular RX list. */
|
|
if (pcn_list_rx_init(sc) == ENOBUFS) {
|
|
if_printf(ifp, "initialization failed: no "
|
|
"memory for rx buffers\n");
|
|
pcn_stop(sc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Init tx descriptors.
|
|
*/
|
|
pcn_list_tx_init(sc);
|
|
|
|
/* Clear PCN_MISC_ASEL so we can set the port via PCN_CSR_MODE. */
|
|
PCN_BCR_CLRBIT(sc, PCN_BCR_MISCCFG, PCN_MISC_ASEL);
|
|
|
|
/*
|
|
* Set up the port based on the currently selected media.
|
|
* For Am79C978 we've to unconditionally set PCN_PORT_MII and
|
|
* set the PHY in PCN_BCR_PHYSEL instead.
|
|
*/
|
|
if (sc->pcn_type != Am79C978 &&
|
|
IFM_INST(ife->ifm_media) == sc->pcn_inst_10bt)
|
|
pcn_csr_write(sc, PCN_CSR_MODE, PCN_PORT_10BASET);
|
|
else
|
|
pcn_csr_write(sc, PCN_CSR_MODE, PCN_PORT_MII);
|
|
|
|
/* Set up RX filter. */
|
|
pcn_setfilt(ifp);
|
|
|
|
/*
|
|
* Load the multicast filter.
|
|
*/
|
|
pcn_setmulti(sc);
|
|
|
|
/*
|
|
* Load the addresses of the RX and TX lists.
|
|
*/
|
|
pcn_csr_write(sc, PCN_CSR_RXADDR0,
|
|
vtophys(&sc->pcn_ldata->pcn_rx_list[0]) & 0xFFFF);
|
|
pcn_csr_write(sc, PCN_CSR_RXADDR1,
|
|
(vtophys(&sc->pcn_ldata->pcn_rx_list[0]) >> 16) & 0xFFFF);
|
|
pcn_csr_write(sc, PCN_CSR_TXADDR0,
|
|
vtophys(&sc->pcn_ldata->pcn_tx_list[0]) & 0xFFFF);
|
|
pcn_csr_write(sc, PCN_CSR_TXADDR1,
|
|
(vtophys(&sc->pcn_ldata->pcn_tx_list[0]) >> 16) & 0xFFFF);
|
|
|
|
/* Set the RX and TX ring sizes. */
|
|
pcn_csr_write(sc, PCN_CSR_RXRINGLEN, (~PCN_RX_LIST_CNT) + 1);
|
|
pcn_csr_write(sc, PCN_CSR_TXRINGLEN, (~PCN_TX_LIST_CNT) + 1);
|
|
|
|
/* We're not using the initialization block. */
|
|
pcn_csr_write(sc, PCN_CSR_IAB1, 0);
|
|
|
|
/* Enable fast suspend mode. */
|
|
PCN_CSR_SETBIT(sc, PCN_CSR_EXTCTL2, PCN_EXTCTL2_FASTSPNDE);
|
|
|
|
/*
|
|
* Enable burst read and write. Also set the no underflow
|
|
* bit. This will avoid transmit underruns in certain
|
|
* conditions while still providing decent performance.
|
|
*/
|
|
PCN_BCR_SETBIT(sc, PCN_BCR_BUSCTL, PCN_BUSCTL_NOUFLOW|
|
|
PCN_BUSCTL_BREAD|PCN_BUSCTL_BWRITE);
|
|
|
|
/* Enable graceful recovery from underflow. */
|
|
PCN_CSR_SETBIT(sc, PCN_CSR_IMR, PCN_IMR_DXSUFLO);
|
|
|
|
/* Enable auto-padding of short TX frames. */
|
|
PCN_CSR_SETBIT(sc, PCN_CSR_TFEAT, PCN_TFEAT_PAD_TX);
|
|
|
|
/* Disable MII autoneg (we handle this ourselves). */
|
|
PCN_BCR_SETBIT(sc, PCN_BCR_MIICTL, PCN_MIICTL_DANAS);
|
|
|
|
if (sc->pcn_type == Am79C978)
|
|
/* XXX support other PHYs? */
|
|
pcn_bcr_write(sc, PCN_BCR_PHYSEL,
|
|
PCN_PHYSEL_PCNET|PCN_PHY_HOMEPNA);
|
|
|
|
/* Enable interrupts and start the controller running. */
|
|
pcn_csr_write(sc, PCN_CSR_CSR, PCN_CSR_INTEN|PCN_CSR_START);
|
|
|
|
mii_mediachg(mii);
|
|
|
|
ifp->if_drv_flags |= IFF_DRV_RUNNING;
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
|
|
callout_reset(&sc->pcn_stat_callout, hz, pcn_tick, sc);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Set media options.
|
|
*/
|
|
static int
|
|
pcn_ifmedia_upd(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct pcn_softc *sc;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
PCN_LOCK(sc);
|
|
|
|
/*
|
|
* At least Am79C971 with DP83840A can wedge when switching
|
|
* from the internal 10baseT PHY to the external PHY without
|
|
* issuing pcn_reset(). For setting the port in PCN_CSR_MODE
|
|
* the PCnet chip has to be powered down or stopped anyway
|
|
* and although documented otherwise it doesn't take effect
|
|
* until the next initialization.
|
|
*/
|
|
sc->pcn_link = 0;
|
|
pcn_stop(sc);
|
|
pcn_reset(sc);
|
|
pcn_init_locked(sc);
|
|
if (ifp->if_snd.ifq_head != NULL)
|
|
pcn_start_locked(ifp);
|
|
|
|
PCN_UNLOCK(sc);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Report current media status.
|
|
*/
|
|
static void
|
|
pcn_ifmedia_sts(ifp, ifmr)
|
|
struct ifnet *ifp;
|
|
struct ifmediareq *ifmr;
|
|
{
|
|
struct pcn_softc *sc;
|
|
struct mii_data *mii;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
mii = device_get_softc(sc->pcn_miibus);
|
|
PCN_LOCK(sc);
|
|
mii_pollstat(mii);
|
|
ifmr->ifm_active = mii->mii_media_active;
|
|
ifmr->ifm_status = mii->mii_media_status;
|
|
PCN_UNLOCK(sc);
|
|
|
|
return;
|
|
}
|
|
|
|
static int
|
|
pcn_ioctl(ifp, command, data)
|
|
struct ifnet *ifp;
|
|
u_long command;
|
|
caddr_t data;
|
|
{
|
|
struct pcn_softc *sc = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
struct mii_data *mii = NULL;
|
|
int error = 0;
|
|
|
|
switch(command) {
|
|
case SIOCSIFFLAGS:
|
|
PCN_LOCK(sc);
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING &&
|
|
ifp->if_flags & IFF_PROMISC &&
|
|
!(sc->pcn_if_flags & IFF_PROMISC)) {
|
|
PCN_CSR_SETBIT(sc, PCN_CSR_EXTCTL1,
|
|
PCN_EXTCTL1_SPND);
|
|
pcn_setfilt(ifp);
|
|
PCN_CSR_CLRBIT(sc, PCN_CSR_EXTCTL1,
|
|
PCN_EXTCTL1_SPND);
|
|
pcn_csr_write(sc, PCN_CSR_CSR,
|
|
PCN_CSR_INTEN|PCN_CSR_START);
|
|
} else if (ifp->if_drv_flags & IFF_DRV_RUNNING &&
|
|
!(ifp->if_flags & IFF_PROMISC) &&
|
|
sc->pcn_if_flags & IFF_PROMISC) {
|
|
PCN_CSR_SETBIT(sc, PCN_CSR_EXTCTL1,
|
|
PCN_EXTCTL1_SPND);
|
|
pcn_setfilt(ifp);
|
|
PCN_CSR_CLRBIT(sc, PCN_CSR_EXTCTL1,
|
|
PCN_EXTCTL1_SPND);
|
|
pcn_csr_write(sc, PCN_CSR_CSR,
|
|
PCN_CSR_INTEN|PCN_CSR_START);
|
|
} else if (!(ifp->if_drv_flags & IFF_DRV_RUNNING))
|
|
pcn_init_locked(sc);
|
|
} else {
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
pcn_stop(sc);
|
|
}
|
|
sc->pcn_if_flags = ifp->if_flags;
|
|
PCN_UNLOCK(sc);
|
|
error = 0;
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
PCN_LOCK(sc);
|
|
pcn_setmulti(sc);
|
|
PCN_UNLOCK(sc);
|
|
error = 0;
|
|
break;
|
|
case SIOCGIFMEDIA:
|
|
case SIOCSIFMEDIA:
|
|
mii = device_get_softc(sc->pcn_miibus);
|
|
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
|
|
break;
|
|
default:
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
}
|
|
|
|
return(error);
|
|
}
|
|
|
|
static void
|
|
pcn_watchdog(struct pcn_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
|
|
PCN_LOCK_ASSERT(sc);
|
|
ifp = sc->pcn_ifp;
|
|
|
|
ifp->if_oerrors++;
|
|
if_printf(ifp, "watchdog timeout\n");
|
|
|
|
pcn_stop(sc);
|
|
pcn_reset(sc);
|
|
pcn_init_locked(sc);
|
|
|
|
if (ifp->if_snd.ifq_head != NULL)
|
|
pcn_start_locked(ifp);
|
|
}
|
|
|
|
/*
|
|
* Stop the adapter and free any mbufs allocated to the
|
|
* RX and TX lists.
|
|
*/
|
|
static void
|
|
pcn_stop(struct pcn_softc *sc)
|
|
{
|
|
register int i;
|
|
struct ifnet *ifp;
|
|
|
|
PCN_LOCK_ASSERT(sc);
|
|
ifp = sc->pcn_ifp;
|
|
sc->pcn_timer = 0;
|
|
|
|
callout_stop(&sc->pcn_stat_callout);
|
|
|
|
/* Turn off interrupts */
|
|
PCN_CSR_CLRBIT(sc, PCN_CSR_CSR, PCN_CSR_INTEN);
|
|
/* Stop adapter */
|
|
PCN_CSR_SETBIT(sc, PCN_CSR_CSR, PCN_CSR_STOP);
|
|
sc->pcn_link = 0;
|
|
|
|
/*
|
|
* Free data in the RX lists.
|
|
*/
|
|
for (i = 0; i < PCN_RX_LIST_CNT; i++) {
|
|
if (sc->pcn_cdata.pcn_rx_chain[i] != NULL) {
|
|
m_freem(sc->pcn_cdata.pcn_rx_chain[i]);
|
|
sc->pcn_cdata.pcn_rx_chain[i] = NULL;
|
|
}
|
|
}
|
|
bzero((char *)&sc->pcn_ldata->pcn_rx_list,
|
|
sizeof(sc->pcn_ldata->pcn_rx_list));
|
|
|
|
/*
|
|
* Free the TX list buffers.
|
|
*/
|
|
for (i = 0; i < PCN_TX_LIST_CNT; i++) {
|
|
if (sc->pcn_cdata.pcn_tx_chain[i] != NULL) {
|
|
m_freem(sc->pcn_cdata.pcn_tx_chain[i]);
|
|
sc->pcn_cdata.pcn_tx_chain[i] = NULL;
|
|
}
|
|
}
|
|
|
|
bzero((char *)&sc->pcn_ldata->pcn_tx_list,
|
|
sizeof(sc->pcn_ldata->pcn_tx_list));
|
|
|
|
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Stop all chip I/O so that the kernel's probe routines don't
|
|
* get confused by errant DMAs when rebooting.
|
|
*/
|
|
static int
|
|
pcn_shutdown(device_t dev)
|
|
{
|
|
struct pcn_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
PCN_LOCK(sc);
|
|
pcn_reset(sc);
|
|
pcn_stop(sc);
|
|
PCN_UNLOCK(sc);
|
|
|
|
return 0;
|
|
}
|