freebsd-skq/usr.sbin/ctm/ctm_rmail/ctm_rmail.1

.\" NOTICE: This is free documentation.  I hope you get some use from these
.\" words.  In return you should think about all the nice people who sweat
.\" blood to document their free software.  Maybe you should write some
.\" documentation and give it away.  Maybe with a free program attached!
.\"
.\" Author: Stephen McKay
.\"
.\" $FreeBSD$
.\"
.Dd January 24, 1995
.Dt CTM_MAIL 1
.Os
.Sh NAME
.Nm ctm_smail ,
.Nm ctm_dequeue ,
.Nm ctm_rmail
.Nd send and receive
.Xr ctm 1
deltas via mail
.Sh SYNOPSIS
.Nm ctm_smail
.Op Fl l Ar log
.Op Fl m Ar maxmsgsize
.Op Fl c Ar maxctmsize
.Op Fl q Ar queue-dir
.Ar ctm-delta
.Ar mail-alias
.Nm ctm_dequeue
.Op Fl l Ar log
.Op Fl n Ar numchunks
.Ar queue-dir
.Nm ctm_rmail
.Op Fl Dfuv
.Op Fl l Ar log
.Op Fl p Ar piecedir
.Op Fl d Ar deltadir
.Op Fl b Ar basedir
.Op Ar
.Sh DESCRIPTION
In conjunction with the
.Xr ctm 1
command,
.Nm ctm_smail ,
.Nm ctm_dequeue
and
.Nm ctm_rmail
are used to distribute changes to a source tree via email.
The
.Nm ctm_smail
utility is given a compressed
.Xr ctm
delta, and a mailing list to send it to.
It splits the delta into manageable
pieces, encodes them as mail messages and sends them to the mailing list
(optionally queued to spread the mail load).
Each recipient uses
.Nm ctm_rmail
(either manually or automatically) to decode and reassemble the delta, and
optionally call
.Xr ctm
to apply it to the source tree.
At the moment,
several source trees are distributed, and by several sites.
These include
the
.Fx Ns -current
source and CVS trees, distributed by
.Li freefall.FreeBSD.org .
.Pp
Command line arguments for
.Nm ctm_smail :
.Bl -tag -width indent
.It Fl l Ar log
Instead of appearing on
.Em stderr ,
error diagnostics and informational messages (other than command line errors)
are time stamped and written to the file
.Em log .
.It Fl m Ar maxmsgsize
Limit the maximum size mail message that
.Nm ctm_smail
is allowed to send.
It is approximate since mail headers and other niceties
are not counted in this limit.
If not specified, it will default to 64000
bytes, leaving room for 1535 bytes of headers before the rumoured 64k mail
limit.
.It Fl c Ar maxctmsize
Limit the maximum size delta that will be sent.
Deltas bigger that this
limit will cause an apology mail message to be sent to the mailing list.
This is to prevent massive changes overwhelming users' mail boxes.
Note that
this is the size before encoding.
Encoding causes a 4/3 size increase before
mail headers are added.
If not specified, there is no limit.
.It Fl q Ar queue-dir
Instead of mailing the delta pieces now, store them in the given directory
to be mailed later using
.Nm ctm_dequeue .
This feature allows the mailing of large deltas to be spread out over
hours or even days to limit the impact on recipients with limited network
bandwidth or small mail spool areas.
.El
.Pp
.Ar ctm-delta
is the delta to be sent, and
.Ar mail-alias
is the mailing list to send the delta to.
The mail messages are sent using
.Xr sendmail 8 .
.Pp
Command line arguments for
.Nm ctm_dequeue :
.Bl -tag -width indent
.It Fl l Ar log
Instead of appearing on
.Em stderr ,
error diagnostics and informational messages (other than command line errors)
are time stamped and written to the file
.Em log .
.It Fl n Ar numchunks
Limit the number of mail messages that
.Nm ctm_dequeue
will send per run.
By default,
.Nm ctm_dequeue
will send one mail message per run.
.El
.Pp
.Ar queuedir
is the directory containing the mail messages stored by
.Nm ctm_smail .
Up to
.Ar numchunks
mail messages will be sent in each run.
The recipient mailing list is already
encoded in the queued files.
.Pp
It is safe to run
.Nm ctm_dequeue
while
.Nm ctm_smail
is adding entries to the queue, or even to run
.Nm ctm_smail
multiple times concurrently, but a separate queue directory should be used
for each tree being distributed.
This is because entries are served in
alphabetical order, and one tree will be unfairly serviced before any others,
based on the delta names, not delta creation times.
.Pp
Command line arguments for
.Nm ctm_rmail :
.Bl -tag -width indent
.It Fl l Ar log
Instead of appearing on
.Em stderr ,
error diagnostics and informational messages (other than command line errors)
are time stamped and written to the file
.Em log .
.It Fl p Ar piecedir
Collect pieces of deltas in this directory.
Each piece corresponds to a
single mail message.
Pieces are removed when complete deltas are built.
If this flag is not given, no input files will be read, but completed
deltas may still be applied with
.Xr ctm
if the
.Fl b
flag is given.
.It Fl d Ar deltadir
Collect completed deltas in this directory.
Deltas are built from one or
more pieces when all pieces are present.
.It Fl b Ar basedir
Apply any completed deltas to this source tree.
If this flag is not given,
deltas will be stored, but not applied.
The user may then apply the deltas
manually, or by using
.Nm ctm_rmail
without the
.Fl p
flag.
Deltas will not be applied if they do not match the
.Li .ctm_status
file in
.Ar basedir
(or if
.Li .ctm_status
does not exist).
.It Fl D
Delete deltas after successful application by
.Xr ctm .
It is probably a good idea to avoid this flag (and keep all the deltas) as
.Xr ctm
has the ability to recover small groups of files from a full set of deltas.
.It Fl f
Fork and execute in the background while applying deltas with
.Xr ctm .
This is useful when automatically invoking
.Nm ctm_rmail
from
.Xr sendmail
because
.Xr ctm
can take a very long time to complete, causing other people's mail to
be delayed, and can in theory cause spurious
mail retransmission due to the remote
.Xr sendmail
timing out, or even termination of
.Nm ctm_rmail
by mail filters such as
.Xr "MH's"
.Xr slocal .
Do not worry about zillions of background
.Xr ctm
processes loading your machine, since locking is used to prevent more than one
.Xr ctm
invocation at a time.
.It Fl u
Pass the
.Fl u
flag to the
.Xr ctm
command when applying the complete deltas, causing it to set the modification
time of created and modified files to the CTM delta creation time.
.It Fl v
Pass the
.Fl v
flag to the
.Xr ctm
command when applying the complete deltas, causing a more informative
output.
All
.Xr ctm
output appears in the
.Nm ctm_rmail
log file.
.El
.Pp
The file arguments (or
.Em stdin ,
if there are none) are scanned for delta pieces.
Multiple delta pieces
can be read from a single file, so an entire maildrop can be scanned
and processed with a single command.
.Pp
It is safe to invoke
.Nm ctm_rmail
multiple times concurrently (with different input files),
as might happen when
.Xr sendmail
is delivering mail asynchronously.
This is because locking is used to
keep things orderly.
.Sh FILE FORMAT
Following are the important parts of an actual (very small) delta piece:
.Bd -literal
From: owner-src-cur
To: src-cur
Subject: ctm-mail src-cur.0003.gz 1/4

CTM_MAIL BEGIN src-cur.0003.gz 1 4
H4sIAAAAAAACA3VU72/bNhD9bP0VByQoEiyRSZEUSQP9kKTeYCR2gDTdsGFAwB/HRogtG5K8NCj6
v4+UZSdtUQh6Rz0eee/xaF/dzx8up3/MFlDkBNrGnbttAwyo1pxoRgoiBNX/QJ5d3c9/X8DcPGGo
lggkPiXngE4W1gUjKPJCYyk5MZRbIqmNW/ASglIFcdwIzTUxaAqhnCPcBqloKEkJVNDMF0Azk+Bo
dDzzk0Ods/+A5gXv9YyJHjMCtJwQNeESNma7hOmXDRxn
CTM_MAIL END 61065
.Ed
.Pp
The subject of the message always begins with
.Dq ctm-mail
followed by the name of the delta, which piece this is, and how many total
pieces there are.
The data are bracketed by
.Dq CTM_MAIL BEGIN
and
.Dq CTM_MAIL END
lines, duplicating the information in the subject line, plus a simple checksum.
.Pp
If the delta exceeds
.Ar maxctmsize ,
then a message like this will be received instead:
.Bd -literal
From: owner-src-cur
To: src-cur
Subject: ctm-notice src-cur.0999.gz

src-cur.0999.gz is 792843 bytes.  The limit is 300000 bytes.

You can retrieve this delta via ftp.
.Ed
.Pp
You are then on your own!
.Sh ENVIRONMENT
If deltas are to be applied then
.Xr ctm 1
and
.Xr gunzip 1
must be in your
.Ev PATH .
.Sh FILES
.Bl -tag -width indent
.It Pa QUEUEDIR/*
Pieces of deltas encoded as mail messages waiting to be sent to the
mailing list.
.It Pa PIECEDIR/*
Pieces of deltas waiting for the rest to arrive.
.It Pa DELTADIR/*
Completed deltas.
.It Pa BASEDIR/.ctm_status
File containing the name and number of the next delta to be applied to this
source tree.
.El
.Sh EXIT STATUS
The
.Nm ctm_smail ,
.Nm ctm_dequeue
and
.Nm ctm_rmail
utilities return exit status 0 for success, and 1 for various failures.
The
.Nm ctm_rmail
utility is expected to be called from a mail transfer program, and thus signals
failure only when the input mail message should be bounced (preferably into
your regular maildrop, not back to the sender).
In short, failure to
apply a completed delta with
.Xr ctm
is not considered an error important enough to bounce the mail, and
.Nm ctm_rmail
returns an exit status of 0.
.Sh EXAMPLES
To send delta 32 of
.Em src-cur
to a group of wonderful code hackers known to
.Xr sendmail
as
.Em src-guys ,
limiting the mail size to roughly 60000 bytes, you could use:
.Bd -literal -offset indent
ctm_smail -m 60000 /wherever/it/is/src-cur.0032.gz src-guys
.Ed
.Pp
To decode every
.Nm ctm-mail
message in your mailbox, assemble them into complete deltas, then apply
any deltas built or lying around, you could use:
.Bd -literal -offset indent
ctm_rmail -p ~/pieces -d ~/deltas -b /usr/ctm-src-cur $MAIL
.Ed
.Pp
(Note that no messages are deleted by
.Nm ctm_rmail .
Any mail reader could be used for that purpose.)
.Pp
To create a mail alias called
.Em receiver-dude
that will automatically decode and assemble deltas, but not apply them,
you could put the following lines in your
.Pa /etc/mail/aliases
file (assuming the
.Pa /ctm/tmp
and
.Pa /ctm/deltas
directories and
.Pa /ctm/log
file are writable by user
.Em daemon
or group
.Em wheel ) :
.Bd -literal -offset indent
receiver-dude: "|ctm_rmail -p /ctm/tmp -d /ctm/deltas -l /ctm/log"
owner-receiver-dude: real_dude@wherever.you.like
.Ed
.Pp
The second line will catch failures and drop them into your regular mailbox,
or wherever else you like.
.Pp
To apply all the deltas collected, and delete those applied, you could use:
.Bd -literal -offset indent
ctm_rmail -D -d /ctm/deltas -b /ctm/src-cur -l /ctm/apply.log
.Ed
.Pp
For maximum flexibility, consider this excerpt from a
.Xr procmail
script:
.Bd -literal -offset indent
PATH=$HOME/bin:$PATH

:0 w
* ^Subject: ctm-mail cvs-cur
| ctm_incoming
.Ed
.Pp
together with the
shell script
.Pa ~/bin/ctm_incoming :
.Bd -literal -offset indent
#! /bin/sh
PATH="$HOME/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin"
export PATH

cd $HOME/ctm && ctm_rmail -f -p pieces -d deltas -l log -b /ctm
.Ed
.Pp
which will deposit all
.Xr ctm
deltas in
.Pa ~/ctm/deltas ,
apply them to the tree in
.Pa /ctm ,
and drop any failures into your regular mail box.
Note the
.Ev PATH
manipulation in
.Pa ctm_incoming
which allows
.Nm ctm_rmail
to execute
.Xr ctm 1
on the
.Pq non- Ns Fx
machine that this example was taken from.
.Sh SECURITY
On its own, CTM is an insecure protocol
- there is no authentication performed that the
changes applied to the source code were sent by a
trusted party, and so care should be taken if the
CTM deltas are obtained via an unauthenticated
medium such as regular email.
It is a relatively simple matter for an attacker
to forge a CTM delta to replace or precede the
legitimate one and insert malicious code into your
source tree.
If the legitimate delta is somehow prevented from
arriving, this will go unnoticed until a later
delta attempts to touch the same file, at which
point the MD5 checksum will fail.
.Pp
To remedy this insecurity, CTM delta pieces generated by
FreeBSD.org are cryptographically signed in a
format compatible with the GNU Privacy Guard
utility, available in /usr/ports/security/gpg, and
the Pretty Good Privacy v5 utility,
/usr/ports/security/pgp5.
The relevant public key can be obtained by
fingering ctm@FreeBSD.org.
.Pp
CTM deltas which are thus signed cannot be
undetectably altered by an attacker.
Therefore it is recommended that you make use of
GPG or PGP5 to verify the signatures if you
receive your CTM deltas via email.
.Sh DIAGNOSTICS
In normal operation,
.Nm ctm_smail
will report messages like:
.Bd -literal -offset indent
ctm_smail: src-cur.0250.gz 1/2 sent to src-guys
.Ed
.Pp
or, if queueing,
.Bd -literal -offset indent
ctm_smail: src-cur.0250.gz 1/2 queued for src-guys
.Ed
.Pp
The
.Nm ctm_dequeue
utility will report messages like:
.Bd -literal -offset indent
ctm_dequeue: src-cur.0250.gz 1/2 sent
.Ed
.Pp
The
.Nm ctm_rmail
utility will report messages like:
.Bd -literal -offset indent
ctm_rmail: src-cur.0250.gz 1/2 stored
ctm_rmail: src-cur.0250.gz 2/2 stored
ctm_rmail: src-cur.0250.gz complete
.Ed
.Pp
If any of the input files do not contain a valid delta piece,
.Nm ctm_rmail
will report:
.Bd -literal -offset indent
ctm_rmail: message contains no delta
.Ed
.Pp
and return an exit status of 1.
You can use this to redirect wayward messages
back into your real mailbox if your mail filter goes wonky.
.Pp
These messages go to
.Em stderr
or to the log file.
Messages from
.Xr ctm 1
turn up here too.
Error messages should be self explanatory.
.Sh SEE ALSO
.Xr ctm 1 ,
.Xr ctm 5
.\" .Sh HISTORY
.Sh AUTHORS
.An Stephen McKay Aq mckay@FreeBSD.org