d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
fdead95125
freebsd-skq/sys/pci/if_rl.c
imp fdead95125 Prefer new location of pci include files (which have only been in the 
tree for two or more years now), except in a few places where there's
code to be compatible with older versions of FreeBSD.
2003-08-22 07:20:27 +00:00

3091 lines
73 KiB
C
Raw Blame History

/*
* Copyright (c) 1997, 1998-2003
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* RealTek 8129/8139/8139C+/8169 PCI NIC driver
*
* Supports several extremely cheap PCI 10/100 and 10/100/1000 adapters
* based on RealTek chipsets. Datasheets can be obtained from
* www.realtek.com.tw.
*
* Written by Bill Paul <wpaul@windriver.com>
* Senior Networking Software Engineer
* Wind River Systems
*/
/*
* The RealTek 8139 PCI NIC redefines the meaning of 'low end.' This is
* probably the worst PCI ethernet controller ever made, with the possible
* exception of the FEAST chip made by SMC. The 8139 supports bus-master
* DMA, but it has a terrible interface that nullifies any performance
* gains that bus-master DMA usually offers.
*
* For transmission, the chip offers a series of four TX descriptor
* registers. Each transmit frame must be in a contiguous buffer, aligned
* on a longword (32-bit) boundary. This means we almost always have to
* do mbuf copies in order to transmit a frame, except in the unlikely
* case where a) the packet fits into a single mbuf, and b) the packet
* is 32-bit aligned within the mbuf's data area. The presence of only
* four descriptor registers means that we can never have more than four
* packets queued for transmission at any one time.
*
* Reception is not much better. The driver has to allocate a single large
* buffer area (up to 64K in size) into which the chip will DMA received
* frames. Because we don't know where within this region received packets
* will begin or end, we have no choice but to copy data from the buffer
* area into mbufs in order to pass the packets up to the higher protocol
* levels.
*
* It's impossible given this rotten design to really achieve decent
* performance at 100Mbps, unless you happen to have a 400Mhz PII or
* some equally overmuscled CPU to drive it.
*
* On the bright side, the 8139 does have a built-in PHY, although
* rather than using an MDIO serial interface like most other NICs, the
* PHY registers are directly accessible through the 8139's register
* space. The 8139 supports autonegotiation, as well as a 64-bit multicast
* filter.
*
* The 8129 chip is an older version of the 8139 that uses an external PHY
* chip. The 8129 has a serial MDIO interface for accessing the MII where
* the 8139 lets you directly access the on-board PHY registers. We need
* to select which interface to use depending on the chip type.
*
* Fast forward a few years. RealTek now has a new chip called the
* 8139C+ which at long last implements descriptor-based DMA. Not
* only that, it supports RX and TX TCP/IP checksum offload, VLAN
* tagging and insertion, TCP large send and 64-bit addressing.
* Better still, it allows arbitrary byte alignments for RX and
* TX buffers, meaning no copying is necessary on any architecture.
* There are a few limitations however: the RX and TX descriptor
* rings must be aligned on 256 byte boundaries, they must be in
* contiguous RAM, and each ring can have a maximum of 64 descriptors.
* There are two TX descriptor queues: one normal priority and one
* high. Descriptor ring addresses and DMA buffer addresses are
* 64 bits wide. The 8139C+ is also backwards compatible with the
* 8139, so the chip will still function with older drivers: C+
* mode has to be enabled by setting the appropriate bits in the C+
* command register. The PHY access mechanism appears to be unchanged.
*
* The 8169 is a 10/100/1000 ethernet MAC. It has almost the same
* programming API as the C+ mode of the 8139C+, with a couple of
* minor changes and additions: TX start register and timer interrupt
* register are located at different offsets, and there are additional
* registers for GMII PHY status and control, as well as TBI-mode
* status and control. There is also a maximum RX packet size
* register to allow the chip to receive jumbo frames. The 8169
* can only be programmed in C+ mode: the old 8139 programming
* method isn't supported with this chip. Also, RealTek has a LOM
* (LAN On Motherboard) gigabit MAC chip called the RTL8110S which
* I believe to be register compatible with the 8169. Unlike the
* 8139C+, the 8169 can have up to 1024 descriptors per DMA ring.
* The reference 8169 board design uses a Marvell 88E1000 'Alaska'
* copper PHY.
*
* The 8169S and 8110S are newer versions of the 8169. Available
* in both 32-bit and 64-bit forms, these devices have built-in
* copper 10/100/1000 PHYs. The 8110S is a lan-on-motherboard chip
* that is pin-for-pin compatible with the 8100. Unfortunately,
* RealTek has not released programming manuals for the 8169S and
* 8110S yet. The datasheet for the original 8169 provides most
* of the information, but you must refer to RealTek's 8169 Linux
* driver to fill in the gaps. Mostly, it appears that the built-in
* PHY requires some special initialization. The original 8169
* datasheet and the 8139C+ datasheet can be obtained from
* http://www.freebsd.org/~wpaul/RealTek.
*
* This driver now supports both the old 8139 and new 8139C+
* programming models. We detect the 8139C+ by looking for the
* corresponding hardware rev bits, and we detect the 8169 by its
* PCI ID. Two new NIC type codes, RL_8139CPLUS and RL_8169 have
* been added to distinguish the chips at runtime. Separate RX and
* TX handling routines have been added to handle C+ mode, which
* are selected via function pointers that are initialized during
* the driver attach phase.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/endian.h>
#include <sys/systm.h>
#include <sys/sockio.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/ethernet.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_vlan_var.h>
#include <net/bpf.h>
#include <machine/bus_pio.h>
#include <machine/bus_memio.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/bus.h>
#include <sys/rman.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
MODULE_DEPEND(rl, pci, 1, 1, 1);
MODULE_DEPEND(rl, ether, 1, 1, 1);
MODULE_DEPEND(rl, miibus, 1, 1, 1);
/* "controller miibus0" required. See GENERIC if you get errors here. */
#include "miibus_if.h"
/*
* Default to using PIO access for this driver. On SMP systems,
* there appear to be problems with memory mapped mode: it looks like
* doing too many memory mapped access back to back in rapid succession
* can hang the bus. I'm inclined to blame this on crummy design/construction
* on the part of RealTek. Memory mapped mode does appear to work on
* uniprocessor systems though.
*/
#define RL_USEIOSPACE
#include <pci/if_rlreg.h>
#define RL_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP)
/*
* Various supported device vendors/types and their names.
*/
static struct rl_type rl_devs[] = {
{ RT_VENDORID, RT_DEVICEID_8129, RL_8129,
"RealTek 8129 10/100BaseTX" },
{ RT_VENDORID, RT_DEVICEID_8139, RL_8139,
"RealTek 8139 10/100BaseTX" },
{ RT_VENDORID, RT_DEVICEID_8169, RL_8169,
"RealTek 8169 10/100/1000BaseTX" },
{ RT_VENDORID, RT_DEVICEID_8138, RL_8139,
"RealTek 8139 10/100BaseTX CardBus" },
{ RT_VENDORID, RT_DEVICEID_8100, RL_8139,
"RealTek 8100 10/100BaseTX" },
{ ACCTON_VENDORID, ACCTON_DEVICEID_5030, RL_8139,
"Accton MPX 5030/5038 10/100BaseTX" },
{ DELTA_VENDORID, DELTA_DEVICEID_8139, RL_8139,
"Delta Electronics 8139 10/100BaseTX" },
{ ADDTRON_VENDORID, ADDTRON_DEVICEID_8139, RL_8139,
"Addtron Technolgy 8139 10/100BaseTX" },
{ DLINK_VENDORID, DLINK_DEVICEID_530TXPLUS, RL_8139,
"D-Link DFE-530TX+ 10/100BaseTX" },
{ DLINK_VENDORID, DLINK_DEVICEID_690TXD, RL_8139,
"D-Link DFE-690TXD 10/100BaseTX" },
{ NORTEL_VENDORID, ACCTON_DEVICEID_5030, RL_8139,
"Nortel Networks 10/100BaseTX" },
{ COREGA_VENDORID, COREGA_DEVICEID_FETHERCBTXD, RL_8139,
"Corega FEther CB-TXD" },
{ COREGA_VENDORID, COREGA_DEVICEID_FETHERIICBTXD, RL_8139,
"Corega FEtherII CB-TXD" },
/* XXX what type of realtek is PEPPERCON_DEVICEID_ROLF ? */
{ PEPPERCON_VENDORID, PEPPERCON_DEVICEID_ROLF, RL_8139,
"Peppercon AG ROL-F" },
{ PLANEX_VENDORID, PLANEX_DEVICEID_FNW3800TX, RL_8139,
"Planex FNW-3800-TX" },
{ CP_VENDORID, RT_DEVICEID_8139, RL_8139,
"Compaq HNE-300" },
{ LEVEL1_VENDORID, LEVEL1_DEVICEID_FPC0106TX, RL_8139,
"LevelOne FPC-0106TX" },
{ EDIMAX_VENDORID, EDIMAX_DEVICEID_EP4103DL, RL_8139,
"Edimax EP-4103DL CardBus" },
{ 0, 0, 0, NULL }
};
static struct rl_hwrev rl_hwrevs[] = {
{ RL_HWREV_8139, RL_8139, "" },
{ RL_HWREV_8139A, RL_8139, "A" },
{ RL_HWREV_8139AG, RL_8139, "A-G" },
{ RL_HWREV_8139B, RL_8139, "B" },
{ RL_HWREV_8130, RL_8139, "8130" },
{ RL_HWREV_8139C, RL_8139, "C" },
{ RL_HWREV_8139D, RL_8139, "8139D/8100B/8100C" },
{ RL_HWREV_8139CPLUS, RL_8139CPLUS, "C+"},
{ RL_HWREV_8169, RL_8169, "8169"},
{ RL_HWREV_8110, RL_8169, "8169S/8110S"},
{ RL_HWREV_8100, RL_8139, "8100"},
{ RL_HWREV_8101, RL_8139, "8101"},
{ 0, 0, NULL }
};
static int rl_probe (device_t);
static int rl_attach (device_t);
static int rl_detach (device_t);
static int rl_encap (struct rl_softc *, struct mbuf *);
static int rl_encapcplus (struct rl_softc *, struct mbuf *, int *);
static void rl_dma_map_addr (void *, bus_dma_segment_t *, int, int);
static void rl_dma_map_desc (void *, bus_dma_segment_t *, int,
bus_size_t, int);
static int rl_allocmem (device_t, struct rl_softc *);
static int rl_allocmemcplus (device_t, struct rl_softc *);
static int rl_newbuf (struct rl_softc *, int, struct mbuf *);
static int rl_rx_list_init (struct rl_softc *);
static int rl_tx_list_init (struct rl_softc *);
static void rl_rxeof (struct rl_softc *);
static void rl_rxeofcplus (struct rl_softc *);
static void rl_txeof (struct rl_softc *);
static void rl_txeofcplus (struct rl_softc *);
static void rl_intr (void *);
static void rl_intrcplus (void *);
static void rl_tick (void *);
static void rl_start (struct ifnet *);
static void rl_startcplus (struct ifnet *);
static int rl_ioctl (struct ifnet *, u_long, caddr_t);
static void rl_init (void *);
static void rl_stop (struct rl_softc *);
static void rl_watchdog (struct ifnet *);
static int rl_suspend (device_t);
static int rl_resume (device_t);
static void rl_shutdown (device_t);
static int rl_ifmedia_upd (struct ifnet *);
static void rl_ifmedia_sts (struct ifnet *, struct ifmediareq *);
static void rl_eeprom_putbyte (struct rl_softc *, int);
static void rl_eeprom_getword (struct rl_softc *, int, u_int16_t *);
static void rl_read_eeprom (struct rl_softc *, caddr_t, int, int, int);
static void rl_mii_sync (struct rl_softc *);
static void rl_mii_send (struct rl_softc *, u_int32_t, int);
static int rl_mii_readreg (struct rl_softc *, struct rl_mii_frame *);
static int rl_mii_writereg (struct rl_softc *, struct rl_mii_frame *);
static int rl_gmii_readreg (device_t, int, int);
static int rl_gmii_writereg (device_t, int, int, int);
static int rl_miibus_readreg (device_t, int, int);
static int rl_miibus_writereg (device_t, int, int, int);
static void rl_miibus_statchg (device_t);
static u_int8_t rl_calchash (caddr_t);
static void rl_setmulti (struct rl_softc *);
static void rl_reset (struct rl_softc *);
static int rl_list_tx_init (struct rl_softc *);
static void rl_dma_map_rxbuf (void *, bus_dma_segment_t *, int, int);
static void rl_dma_map_txbuf (void *, bus_dma_segment_t *, int, int);
#ifdef RL_USEIOSPACE
#define RL_RES SYS_RES_IOPORT
#define RL_RID RL_PCI_LOIO
#else
#define RL_RES SYS_RES_MEMORY
#define RL_RID RL_PCI_LOMEM
#endif
static device_method_t rl_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, rl_probe),
DEVMETHOD(device_attach, rl_attach),
DEVMETHOD(device_detach, rl_detach),
DEVMETHOD(device_suspend, rl_suspend),
DEVMETHOD(device_resume, rl_resume),
DEVMETHOD(device_shutdown, rl_shutdown),
/* bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
/* MII interface */
DEVMETHOD(miibus_readreg, rl_miibus_readreg),
DEVMETHOD(miibus_writereg, rl_miibus_writereg),
DEVMETHOD(miibus_statchg, rl_miibus_statchg),
{ 0, 0 }
};
static driver_t rl_driver = {
"rl",
rl_methods,
sizeof(struct rl_softc)
};
static devclass_t rl_devclass;
DRIVER_MODULE(rl, pci, rl_driver, rl_devclass, 0, 0);
DRIVER_MODULE(rl, cardbus, rl_driver, rl_devclass, 0, 0);
DRIVER_MODULE(miibus, rl, miibus_driver, miibus_devclass, 0, 0);
#define EE_SET(x) \
CSR_WRITE_1(sc, RL_EECMD, \
CSR_READ_1(sc, RL_EECMD) | x)
#define EE_CLR(x) \
CSR_WRITE_1(sc, RL_EECMD, \
CSR_READ_1(sc, RL_EECMD) & ~x)
static void
rl_dma_map_rxbuf(arg, segs, nseg, error)
void *arg;
bus_dma_segment_t *segs;
int nseg, error;
{
struct rl_softc *sc;
sc = arg;
CSR_WRITE_4(sc, RL_RXADDR, segs->ds_addr & 0xFFFFFFFF);
return;
}
static void
rl_dma_map_txbuf(arg, segs, nseg, error)
void *arg;
bus_dma_segment_t *segs;
int nseg, error;
{
struct rl_softc *sc;
sc = arg;
CSR_WRITE_4(sc, RL_CUR_TXADDR(sc), segs->ds_addr & 0xFFFFFFFF);
return;
}
/*
* Send a read command and address to the EEPROM, check for ACK.
*/
static void
rl_eeprom_putbyte(sc, addr)
struct rl_softc *sc;
int addr;
{
register int d, i;
d = addr | sc->rl_eecmd_read;
/*
* Feed in each bit and strobe the clock.
*/
for (i = 0x400; i; i >>= 1) {
if (d & i) {
EE_SET(RL_EE_DATAIN);
} else {
EE_CLR(RL_EE_DATAIN);
}
DELAY(100);
EE_SET(RL_EE_CLK);
DELAY(150);
EE_CLR(RL_EE_CLK);
DELAY(100);
}
return;
}
/*
* Read a word of data stored in the EEPROM at address 'addr.'
*/
static void
rl_eeprom_getword(sc, addr, dest)
struct rl_softc *sc;
int addr;
u_int16_t *dest;
{
register int i;
u_int16_t word = 0;
/* Enter EEPROM access mode. */
CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_PROGRAM|RL_EE_SEL);
/*
* Send address of word we want to read.
*/
rl_eeprom_putbyte(sc, addr);
CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_PROGRAM|RL_EE_SEL);
/*
* Start reading bits from EEPROM.
*/
for (i = 0x8000; i; i >>= 1) {
EE_SET(RL_EE_CLK);
DELAY(100);
if (CSR_READ_1(sc, RL_EECMD) & RL_EE_DATAOUT)
word |= i;
EE_CLR(RL_EE_CLK);
DELAY(100);
}
/* Turn off EEPROM access mode. */
CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF);
*dest = word;
return;
}
/*
* Read a sequence of words from the EEPROM.
*/
static void
rl_read_eeprom(sc, dest, off, cnt, swap)
struct rl_softc *sc;
caddr_t dest;
int off;
int cnt;
int swap;
{
int i;
u_int16_t word = 0, *ptr;
for (i = 0; i < cnt; i++) {
rl_eeprom_getword(sc, off + i, &word);
ptr = (u_int16_t *)(dest + (i * 2));
if (swap)
*ptr = ntohs(word);
else
*ptr = word;
}
return;
}
/*
* MII access routines are provided for the 8129, which
* doesn't have a built-in PHY. For the 8139, we fake things
* up by diverting rl_phy_readreg()/rl_phy_writereg() to the
* direct access PHY registers.
*/
#define MII_SET(x) \
CSR_WRITE_1(sc, RL_MII, \
CSR_READ_1(sc, RL_MII) | (x))
#define MII_CLR(x) \
CSR_WRITE_1(sc, RL_MII, \
CSR_READ_1(sc, RL_MII) & ~(x))
/*
* Sync the PHYs by setting data bit and strobing the clock 32 times.
*/
static void
rl_mii_sync(sc)
struct rl_softc *sc;
{
register int i;
MII_SET(RL_MII_DIR|RL_MII_DATAOUT);
for (i = 0; i < 32; i++) {
MII_SET(RL_MII_CLK);
DELAY(1);
MII_CLR(RL_MII_CLK);
DELAY(1);
}
return;
}
/*
* Clock a series of bits through the MII.
*/
static void
rl_mii_send(sc, bits, cnt)
struct rl_softc *sc;
u_int32_t bits;
int cnt;
{
int i;
MII_CLR(RL_MII_CLK);
for (i = (0x1 << (cnt - 1)); i; i >>= 1) {
if (bits & i) {
MII_SET(RL_MII_DATAOUT);
} else {
MII_CLR(RL_MII_DATAOUT);
}
DELAY(1);
MII_CLR(RL_MII_CLK);
DELAY(1);
MII_SET(RL_MII_CLK);
}
}
/*
* Read an PHY register through the MII.
*/
static int
rl_mii_readreg(sc, frame)
struct rl_softc *sc;
struct rl_mii_frame *frame;
{
int i, ack;
RL_LOCK(sc);
/*
* Set up frame for RX.
*/
frame->mii_stdelim = RL_MII_STARTDELIM;
frame->mii_opcode = RL_MII_READOP;
frame->mii_turnaround = 0;
frame->mii_data = 0;
CSR_WRITE_2(sc, RL_MII, 0);
/*
* Turn on data xmit.
*/
MII_SET(RL_MII_DIR);
rl_mii_sync(sc);
/*
* Send command/address info.
*/
rl_mii_send(sc, frame->mii_stdelim, 2);
rl_mii_send(sc, frame->mii_opcode, 2);
rl_mii_send(sc, frame->mii_phyaddr, 5);
rl_mii_send(sc, frame->mii_regaddr, 5);
/* Idle bit */
MII_CLR((RL_MII_CLK|RL_MII_DATAOUT));
DELAY(1);
MII_SET(RL_MII_CLK);
DELAY(1);
/* Turn off xmit. */
MII_CLR(RL_MII_DIR);
/* Check for ack */
MII_CLR(RL_MII_CLK);
DELAY(1);
ack = CSR_READ_2(sc, RL_MII) & RL_MII_DATAIN;
MII_SET(RL_MII_CLK);
DELAY(1);
/*
* Now try reading data bits. If the ack failed, we still
* need to clock through 16 cycles to keep the PHY(s) in sync.
*/
if (ack) {
for(i = 0; i < 16; i++) {
MII_CLR(RL_MII_CLK);
DELAY(1);
MII_SET(RL_MII_CLK);
DELAY(1);
}
goto fail;
}
for (i = 0x8000; i; i >>= 1) {
MII_CLR(RL_MII_CLK);
DELAY(1);
if (!ack) {
if (CSR_READ_2(sc, RL_MII) & RL_MII_DATAIN)
frame->mii_data |= i;
DELAY(1);
}
MII_SET(RL_MII_CLK);
DELAY(1);
}
fail:
MII_CLR(RL_MII_CLK);
DELAY(1);
MII_SET(RL_MII_CLK);
DELAY(1);
RL_UNLOCK(sc);
if (ack)
return(1);
return(0);
}
/*
* Write to a PHY register through the MII.
*/
static int
rl_mii_writereg(sc, frame)
struct rl_softc *sc;
struct rl_mii_frame *frame;
{
RL_LOCK(sc);
/*
* Set up frame for TX.
*/
frame->mii_stdelim = RL_MII_STARTDELIM;
frame->mii_opcode = RL_MII_WRITEOP;
frame->mii_turnaround = RL_MII_TURNAROUND;
/*
* Turn on data output.
*/
MII_SET(RL_MII_DIR);
rl_mii_sync(sc);
rl_mii_send(sc, frame->mii_stdelim, 2);
rl_mii_send(sc, frame->mii_opcode, 2);
rl_mii_send(sc, frame->mii_phyaddr, 5);
rl_mii_send(sc, frame->mii_regaddr, 5);
rl_mii_send(sc, frame->mii_turnaround, 2);
rl_mii_send(sc, frame->mii_data, 16);
/* Idle bit. */
MII_SET(RL_MII_CLK);
DELAY(1);
MII_CLR(RL_MII_CLK);
DELAY(1);
/*
* Turn off xmit.
*/
MII_CLR(RL_MII_DIR);
RL_UNLOCK(sc);
return(0);
}
static int
rl_gmii_readreg(dev, phy, reg)
device_t dev;
int phy, reg;
{
struct rl_softc *sc;
u_int32_t rval;
int i;
if (phy != 1)
return(0);
sc = device_get_softc(dev);
CSR_WRITE_4(sc, RL_PHYAR, reg << 16);
DELAY(1000);
for (i = 0; i < RL_TIMEOUT; i++) {
rval = CSR_READ_4(sc, RL_PHYAR);
if (rval & RL_PHYAR_BUSY)
break;
DELAY(100);
}
if (i == RL_TIMEOUT) {
printf ("rl%d: PHY read failed\n", sc->rl_unit);
return (0);
}
return (rval & RL_PHYAR_PHYDATA);
}
static int
rl_gmii_writereg(dev, phy, reg, data)
device_t dev;
int phy, reg, data;
{
struct rl_softc *sc;
u_int32_t rval;
int i;
if (phy > 0)
return(0);
sc = device_get_softc(dev);
CSR_WRITE_4(sc, RL_PHYAR, (reg << 16) |
(data | RL_PHYAR_PHYDATA) | RL_PHYAR_BUSY);
DELAY(1000);
for (i = 0; i < RL_TIMEOUT; i++) {
rval = CSR_READ_4(sc, RL_PHYAR);
if (!(rval & RL_PHYAR_BUSY))
break;
DELAY(100);
}
if (i == RL_TIMEOUT) {
printf ("rl%d: PHY write failed\n", sc->rl_unit);
return (0);
}
return (0);
}
static int
rl_miibus_readreg(dev, phy, reg)
device_t dev;
int phy, reg;
{
struct rl_softc *sc;
struct rl_mii_frame frame;
u_int16_t rval = 0;
u_int16_t rl8139_reg = 0;
sc = device_get_softc(dev);
RL_LOCK(sc);
if (sc->rl_type == RL_8169) {
rval = rl_gmii_readreg(dev, phy, reg);
RL_UNLOCK(sc);
return (rval);
}
if (sc->rl_type == RL_8139 || sc->rl_type == RL_8139CPLUS) {
/* Pretend the internal PHY is only at address 0 */
if (phy) {
RL_UNLOCK(sc);
return(0);
}
switch(reg) {
case MII_BMCR:
rl8139_reg = RL_BMCR;
break;
case MII_BMSR:
rl8139_reg = RL_BMSR;
break;
case MII_ANAR:
rl8139_reg = RL_ANAR;
break;
case MII_ANER:
rl8139_reg = RL_ANER;
break;
case MII_ANLPAR:
rl8139_reg = RL_LPAR;
break;
case MII_PHYIDR1:
case MII_PHYIDR2:
RL_UNLOCK(sc);
return(0);
/*
* Allow the rlphy driver to read the media status
* register. If we have a link partner which does not
* support NWAY, this is the register which will tell
* us the results of parallel detection.
*/
case RL_MEDIASTAT:
rval = CSR_READ_1(sc, RL_MEDIASTAT);
RL_UNLOCK(sc);
return(rval);
default:
printf("rl%d: bad phy register\n", sc->rl_unit);
RL_UNLOCK(sc);
return(0);
}
rval = CSR_READ_2(sc, rl8139_reg);
RL_UNLOCK(sc);
return(rval);
}
bzero((char *)&frame, sizeof(frame));
frame.mii_phyaddr = phy;
frame.mii_regaddr = reg;
rl_mii_readreg(sc, &frame);
RL_UNLOCK(sc);
return(frame.mii_data);
}
static int
rl_miibus_writereg(dev, phy, reg, data)
device_t dev;
int phy, reg, data;
{
struct rl_softc *sc;
struct rl_mii_frame frame;
u_int16_t rl8139_reg = 0;
int rval = 0;
sc = device_get_softc(dev);
RL_LOCK(sc);
if (sc->rl_type == RL_8169) {
rval = rl_gmii_writereg(dev, phy, reg, data);
RL_UNLOCK(sc);
return (rval);
}
if (sc->rl_type == RL_8139 || sc->rl_type == RL_8139CPLUS) {
/* Pretend the internal PHY is only at address 0 */
if (phy) {
RL_UNLOCK(sc);
return(0);
}
switch(reg) {
case MII_BMCR:
rl8139_reg = RL_BMCR;
break;
case MII_BMSR:
rl8139_reg = RL_BMSR;
break;
case MII_ANAR:
rl8139_reg = RL_ANAR;
break;
case MII_ANER:
rl8139_reg = RL_ANER;
break;
case MII_ANLPAR:
rl8139_reg = RL_LPAR;
break;
case MII_PHYIDR1:
case MII_PHYIDR2:
RL_UNLOCK(sc);
return(0);
break;
default:
printf("rl%d: bad phy register\n", sc->rl_unit);
RL_UNLOCK(sc);
return(0);
}
CSR_WRITE_2(sc, rl8139_reg, data);
RL_UNLOCK(sc);
return(0);
}
bzero((char *)&frame, sizeof(frame));
frame.mii_phyaddr = phy;
frame.mii_regaddr = reg;
frame.mii_data = data;
rl_mii_writereg(sc, &frame);
RL_UNLOCK(sc);
return(0);
}
static void
rl_miibus_statchg(dev)
device_t dev;
{
return;
}
/*
* Calculate CRC of a multicast group address, return the upper 6 bits.
*/
static u_int8_t
rl_calchash(addr)
caddr_t addr;
{
u_int32_t crc, carry;
int i, j;
u_int8_t c;
/* Compute CRC for the address value. */
crc = 0xFFFFFFFF; /* initial value */
for (i = 0; i < 6; i++) {
c = *(addr + i);
for (j = 0; j < 8; j++) {
carry = ((crc & 0x80000000) ? 1 : 0) ^ (c & 0x01);
crc <<= 1;
c >>= 1;
if (carry)
crc = (crc ^ 0x04c11db6) | carry;
}
}
/* return the filter bit position */
return(crc >> 26);
}
/*
* Program the 64-bit multicast hash filter.
*/
static void
rl_setmulti(sc)
struct rl_softc *sc;
{
struct ifnet *ifp;
int h = 0;
u_int32_t hashes[2] = { 0, 0 };
struct ifmultiaddr *ifma;
u_int32_t rxfilt;
int mcnt = 0;
ifp = &sc->arpcom.ac_if;
rxfilt = CSR_READ_4(sc, RL_RXCFG);
if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
rxfilt |= RL_RXCFG_RX_MULTI;
CSR_WRITE_4(sc, RL_RXCFG, rxfilt);
CSR_WRITE_4(sc, RL_MAR0, 0xFFFFFFFF);
CSR_WRITE_4(sc, RL_MAR4, 0xFFFFFFFF);
return;
}
/* first, zot all the existing hash bits */
CSR_WRITE_4(sc, RL_MAR0, 0);
CSR_WRITE_4(sc, RL_MAR4, 0);
/* now program new ones */
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
if (ifma->ifma_addr->sa_family != AF_LINK)
continue;
h = rl_calchash(LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
if (h < 32)
hashes[0] |= (1 << h);
else
hashes[1] |= (1 << (h - 32));
mcnt++;
}
if (mcnt)
rxfilt |= RL_RXCFG_RX_MULTI;
else
rxfilt &= ~RL_RXCFG_RX_MULTI;
CSR_WRITE_4(sc, RL_RXCFG, rxfilt);
CSR_WRITE_4(sc, RL_MAR0, hashes[0]);
CSR_WRITE_4(sc, RL_MAR4, hashes[1]);
return;
}
static void
rl_reset(sc)
struct rl_softc *sc;
{
register int i;
CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_RESET);
for (i = 0; i < RL_TIMEOUT; i++) {
DELAY(10);
if (!(CSR_READ_1(sc, RL_COMMAND) & RL_CMD_RESET))
break;
}
if (i == RL_TIMEOUT)
printf("rl%d: reset never completed!\n", sc->rl_unit);
CSR_WRITE_1(sc, 0x82, 1);
return;
}
/*
* Probe for a RealTek 8129/8139 chip. Check the PCI vendor and device
* IDs against our list and return a device name if we find a match.
*/
static int
rl_probe(dev)
device_t dev;
{
struct rl_type *t;
struct rl_softc *sc;
struct rl_hwrev *hw_rev;
int rid;
u_int32_t hwrev;
char desc[64];
t = rl_devs;
sc = device_get_softc(dev);
while(t->rl_name != NULL) {
if ((pci_get_vendor(dev) == t->rl_vid) &&
(pci_get_device(dev) == t->rl_did)) {
/*
* Temporarily map the I/O space
* so we can read the chip ID register.
*/
rid = RL_RID;
sc->rl_res = bus_alloc_resource(dev, RL_RES, &rid,
0, ~0, 1, RF_ACTIVE);
if (sc->rl_res == NULL) {
device_printf(dev,
"couldn't map ports/memory\n");
return(ENXIO);
}
sc->rl_btag = rman_get_bustag(sc->rl_res);
sc->rl_bhandle = rman_get_bushandle(sc->rl_res);
mtx_init(&sc->rl_mtx,
device_get_nameunit(dev),
MTX_NETWORK_LOCK, MTX_DEF);
RL_LOCK(sc);
if (t->rl_basetype == RL_8139) {
hwrev = CSR_READ_4(sc, RL_TXCFG) &
RL_TXCFG_HWREV;
hw_rev = rl_hwrevs;
while (hw_rev->rl_desc != NULL) {
if (hw_rev->rl_rev == hwrev) {
sprintf(desc, "%s, rev. %s",
t->rl_name,
hw_rev->rl_desc);
sc->rl_type = hw_rev->rl_type;
break;
}
hw_rev++;
}
if (hw_rev->rl_desc == NULL)
sprintf(desc, "%s, rev. %s",
t->rl_name, "unknown");
} else
sprintf(desc, "%s", t->rl_name);
bus_release_resource(dev, RL_RES,
RL_RID, sc->rl_res);
RL_UNLOCK(sc);
mtx_destroy(&sc->rl_mtx);
device_set_desc_copy(dev, desc);
return(0);
}
t++;
}
return(ENXIO);
}
/*
* This routine takes the segment list provided as the result of
* a bus_dma_map_load() operation and assigns the addresses/lengths
* to RealTek DMA descriptors. This can be called either by the RX
* code or the TX code. In the RX case, we'll probably wind up mapping
* at most one segment. For the TX case, there could be any number of
* segments since TX packets may span multiple mbufs. In either case,
* if the number of segments is larger than the rl_maxsegs limit
* specified by the caller, we abort the mapping operation. Sadly,
* whoever designed the buffer mapping API did not provide a way to
* return an error from here, so we have to fake it a bit.
*/
static void
rl_dma_map_desc(arg, segs, nseg, mapsize, error)
void *arg;
bus_dma_segment_t *segs;
int nseg;
bus_size_t mapsize;
int error;
{
struct rl_dmaload_arg *ctx;
struct rl_desc *d = NULL;
int i = 0, idx;
if (error)
return;
ctx = arg;
/* Signal error to caller if there's too many segments */
if (nseg > ctx->rl_maxsegs) {
ctx->rl_maxsegs = 0;
return;
}
/*
* Map the segment array into descriptors. Note that we set the
* start-of-frame and end-of-frame markers for either TX or RX, but
* they really only have meaning in the TX case. (In the RX case,
* it's the chip that tells us where packets begin and end.)
* We also keep track of the end of the ring and set the
* end-of-ring bits as needed, and we set the ownership bits
* in all except the very first descriptor. (The caller will
* set this descriptor later when it start transmission or
* reception.)
*/
idx = ctx->rl_idx;
while(1) {
u_int32_t cmdstat;
d = &ctx->rl_ring[idx];
if (le32toh(d->rl_cmdstat) & RL_RDESC_STAT_OWN) {
ctx->rl_maxsegs = 0;
return;
}
cmdstat = segs[i].ds_len;
d->rl_bufaddr_lo = htole32(RL_ADDR_LO(segs[i].ds_addr));
d->rl_bufaddr_hi = htole32(RL_ADDR_HI(segs[i].ds_addr));
if (i == 0)
cmdstat |= RL_TDESC_CMD_SOF;
else
cmdstat |= RL_TDESC_CMD_OWN;
if (idx == (RL_RX_DESC_CNT - 1))
cmdstat |= RL_TDESC_CMD_EOR;
d->rl_cmdstat = htole32(cmdstat | ctx->rl_flags);
i++;
if (i == nseg)
break;
RL_DESC_INC(idx);
}
d->rl_cmdstat |= htole32(RL_TDESC_CMD_EOF);
ctx->rl_maxsegs = nseg;
ctx->rl_idx = idx;
return;
}
/*
* Map a single buffer address.
*/
static void
rl_dma_map_addr(arg, segs, nseg, error)
void *arg;
bus_dma_segment_t *segs;
int nseg;
int error;
{
u_int32_t *addr;
if (error)
return;
KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg));
addr = arg;
*addr = segs->ds_addr;
return;
}
static int
rl_allocmem(dev, sc)
device_t dev;
struct rl_softc *sc;
{
int error;
/*
* Now allocate a tag for the DMA descriptor lists.
* All of our lists are allocated as a contiguous block
* of memory.
*/
error = bus_dma_tag_create(sc->rl_parent_tag, /* parent */
1, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
RL_RXBUFLEN + 1518, 1, /* maxsize,nsegments */
BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->rl_tag);
if (error)
return(error);
/*
* Now allocate a chunk of DMA-able memory based on the
* tag we just created.
*/
error = bus_dmamem_alloc(sc->rl_tag,
(void **)&sc->rl_cdata.rl_rx_buf, BUS_DMA_NOWAIT,
&sc->rl_cdata.rl_rx_dmamap);
if (error) {
printf("rl%d: no memory for list buffers!\n", sc->rl_unit);
bus_dma_tag_destroy(sc->rl_tag);
sc->rl_tag = NULL;
return(error);
}
/* Leave a few bytes before the start of the RX ring buffer. */
sc->rl_cdata.rl_rx_buf_ptr = sc->rl_cdata.rl_rx_buf;
sc->rl_cdata.rl_rx_buf += sizeof(u_int64_t);
return(0);
}
static int
rl_allocmemcplus(dev, sc)
device_t dev;
struct rl_softc *sc;
{
int error;
int nseg;
int i;
/*
* Allocate map for RX mbufs.
*/
nseg = 32;
error = bus_dma_tag_create(sc->rl_parent_tag, ETHER_ALIGN, 0,
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL,
NULL, MCLBYTES * nseg, nseg, MCLBYTES, 0, NULL, NULL,
&sc->rl_ldata.rl_mtag);
if (error) {
device_printf(dev, "could not allocate dma tag\n");
return (ENOMEM);
}
/*
* Allocate map for TX descriptor list.
*/
error = bus_dma_tag_create(sc->rl_parent_tag, RL_RING_ALIGN,
0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL,
NULL, RL_TX_LIST_SZ, 1, RL_TX_LIST_SZ, 0, NULL, NULL,
&sc->rl_ldata.rl_tx_list_tag);
if (error) {
device_printf(dev, "could not allocate dma tag\n");
return (ENOMEM);
}
/* Allocate DMA'able memory for the TX ring */
error = bus_dmamem_alloc(sc->rl_ldata.rl_tx_list_tag,
(void **)&sc->rl_ldata.rl_tx_list, BUS_DMA_NOWAIT | BUS_DMA_ZERO,
&sc->rl_ldata.rl_tx_list_map);
if (error)
return (ENOMEM);
/* Load the map for the TX ring. */
error = bus_dmamap_load(sc->rl_ldata.rl_tx_list_tag,
sc->rl_ldata.rl_tx_list_map, sc->rl_ldata.rl_tx_list,
RL_TX_LIST_SZ, rl_dma_map_addr,
&sc->rl_ldata.rl_tx_list_addr, BUS_DMA_NOWAIT);
/* Create DMA maps for TX buffers */
for (i = 0; i < RL_TX_DESC_CNT; i++) {
error = bus_dmamap_create(sc->rl_ldata.rl_mtag, 0,
&sc->rl_ldata.rl_tx_dmamap[i]);
if (error) {
device_printf(dev, "can't create DMA map for TX\n");
return(ENOMEM);
}
}
/*
* Allocate map for RX descriptor list.
*/
error = bus_dma_tag_create(sc->rl_parent_tag, RL_RING_ALIGN,
0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL,
NULL, RL_TX_LIST_SZ, 1, RL_TX_LIST_SZ, 0, NULL, NULL,
&sc->rl_ldata.rl_rx_list_tag);
if (error) {
device_printf(dev, "could not allocate dma tag\n");
return (ENOMEM);
}
/* Allocate DMA'able memory for the RX ring */
error = bus_dmamem_alloc(sc->rl_ldata.rl_rx_list_tag,
(void **)&sc->rl_ldata.rl_rx_list, BUS_DMA_NOWAIT | BUS_DMA_ZERO,
&sc->rl_ldata.rl_rx_list_map);
if (error)
return (ENOMEM);
/* Load the map for the RX ring. */
error = bus_dmamap_load(sc->rl_ldata.rl_rx_list_tag,
sc->rl_ldata.rl_rx_list_map, sc->rl_ldata.rl_rx_list,
RL_TX_LIST_SZ, rl_dma_map_addr,
&sc->rl_ldata.rl_rx_list_addr, BUS_DMA_NOWAIT);
/* Create DMA maps for RX buffers */
for (i = 0; i < RL_RX_DESC_CNT; i++) {
error = bus_dmamap_create(sc->rl_ldata.rl_mtag, 0,
&sc->rl_ldata.rl_rx_dmamap[i]);
if (error) {
device_printf(dev, "can't create DMA map for RX\n");
return(ENOMEM);
}
}
return(0);
}
/*
* Attach the interface. Allocate softc structures, do ifmedia
* setup and ethernet/BPF attach.
*/
static int
rl_attach(dev)
device_t dev;
{
u_char eaddr[ETHER_ADDR_LEN];
u_int16_t as[3];
struct rl_softc *sc;
struct ifnet *ifp;
struct rl_type *t;
struct rl_hwrev *hw_rev;
int hwrev;
u_int16_t rl_did = 0;
int unit, error = 0, rid, i;
sc = device_get_softc(dev);
unit = device_get_unit(dev);
mtx_init(&sc->rl_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
MTX_DEF | MTX_RECURSE);
#ifndef BURN_BRIDGES
/*
* Handle power management nonsense.
*/
if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) {
u_int32_t iobase, membase, irq;
/* Save important PCI config data. */
iobase = pci_read_config(dev, RL_PCI_LOIO, 4);
membase = pci_read_config(dev, RL_PCI_LOMEM, 4);
irq = pci_read_config(dev, RL_PCI_INTLINE, 4);
/* Reset the power state. */
printf("rl%d: chip is is in D%d power mode "
"-- setting to D0\n", unit,
pci_get_powerstate(dev));
pci_set_powerstate(dev, PCI_POWERSTATE_D0);
/* Restore PCI config data. */
pci_write_config(dev, RL_PCI_LOIO, iobase, 4);
pci_write_config(dev, RL_PCI_LOMEM, membase, 4);
pci_write_config(dev, RL_PCI_INTLINE, irq, 4);
}
#endif
/*
* Map control/status registers.
*/
pci_enable_busmaster(dev);
rid = RL_RID;
sc->rl_res = bus_alloc_resource(dev, RL_RES, &rid,
0, ~0, 1, RF_ACTIVE);
if (sc->rl_res == NULL) {
printf ("rl%d: couldn't map ports/memory\n", unit);
error = ENXIO;
goto fail;
}
#ifdef notdef
/* Detect the Realtek 8139B. For some reason, this chip is very
* unstable when left to autoselect the media
* The best workaround is to set the device to the required
* media type or to set it to the 10 Meg speed.
*/
if ((rman_get_end(sc->rl_res)-rman_get_start(sc->rl_res))==0xff) {
printf("rl%d: Realtek 8139B detected. Warning,"
" this may be unstable in autoselect mode\n", unit);
}
#endif
sc->rl_btag = rman_get_bustag(sc->rl_res);
sc->rl_bhandle = rman_get_bushandle(sc->rl_res);
/* Allocate interrupt */
rid = 0;
sc->rl_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1,
RF_SHAREABLE | RF_ACTIVE);
if (sc->rl_irq == NULL) {
printf("rl%d: couldn't map interrupt\n", unit);
error = ENXIO;
goto fail;
}
/* Reset the adapter. */
rl_reset(sc);
sc->rl_eecmd_read = RL_EECMD_READ_6BIT;
rl_read_eeprom(sc, (caddr_t)&rl_did, 0, 1, 0);
if (rl_did != 0x8129)
sc->rl_eecmd_read = RL_EECMD_READ_8BIT;
/*
* Get station address from the EEPROM.
*/
rl_read_eeprom(sc, (caddr_t)as, RL_EE_EADDR, 3, 0);
for (i = 0; i < 3; i++) {
eaddr[(i * 2) + 0] = as[i] & 0xff;
eaddr[(i * 2) + 1] = as[i] >> 8;
}
/*
* A RealTek chip was detected. Inform the world.
*/
printf("rl%d: Ethernet address: %6D\n", unit, eaddr, ":");
sc->rl_unit = unit;
bcopy(eaddr, (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
/*
* Now read the exact device type from the EEPROM to find
* out if it's an 8129 or 8139.
*/
rl_read_eeprom(sc, (caddr_t)&rl_did, RL_EE_PCI_DID, 1, 0);
t = rl_devs;
while(t->rl_name != NULL) {
if (rl_did == t->rl_did) {
sc->rl_type = t->rl_basetype;
break;
}
t++;
}
if (t->rl_name == NULL) {
printf("rl%d: unknown device ID: %x\n", unit, rl_did);
error = ENXIO;
goto fail;
}
if (sc->rl_type == RL_8139) {
hw_rev = rl_hwrevs;
hwrev = CSR_READ_4(sc, RL_TXCFG) & RL_TXCFG_HWREV;
while (hw_rev->rl_desc != NULL) {
if (hw_rev->rl_rev == hwrev) {
sc->rl_type = hw_rev->rl_type;
break;
}
hw_rev++;
}
if (hw_rev->rl_desc == NULL) {
printf("rl%d: unknown hwrev: %x\n", unit, hwrev);
}
} else if (rl_did == RT_DEVICEID_8129) {
sc->rl_type = RL_8129;
} else if (rl_did == RT_DEVICEID_8169) {
sc->rl_type = RL_8169;
}
/*
* Allocate the parent bus DMA tag appropriate for PCI.
*/
#define RL_NSEG_NEW 32
error = bus_dma_tag_create(NULL, /* parent */
1, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR_32BIT,/* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
MAXBSIZE, RL_NSEG_NEW, /* maxsize, nsegments */
BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */
BUS_DMA_ALLOCNOW, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->rl_parent_tag);
if (error)
goto fail;
/*
* If this is an 8139C+ or 8169 chip, we have to allocate
* our busdma tags/memory differently. We need to allocate
* a chunk of DMA'able memory for the RX and TX descriptor
* lists.
*/
if (sc->rl_type == RL_8139CPLUS || sc->rl_type == RL_8169)
error = rl_allocmemcplus(dev, sc);
else
error = rl_allocmem(dev, sc);
if (error)
goto fail;
/* Do MII setup */
if (mii_phy_probe(dev, &sc->rl_miibus,
rl_ifmedia_upd, rl_ifmedia_sts)) {
printf("rl%d: MII without any phy!\n", sc->rl_unit);
error = ENXIO;
goto fail;
}
ifp = &sc->arpcom.ac_if;
ifp->if_softc = sc;
ifp->if_unit = unit;
ifp->if_name = "rl";
ifp->if_mtu = ETHERMTU;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = rl_ioctl;
ifp->if_output = ether_output;
ifp->if_capabilities = IFCAP_VLAN_MTU;
if (RL_ISCPLUS(sc)) {
ifp->if_start = rl_startcplus;
ifp->if_hwassist = RL_CSUM_FEATURES;
ifp->if_capabilities |= IFCAP_HWCSUM|IFCAP_VLAN_HWTAGGING;
} else
ifp->if_start = rl_start;
ifp->if_watchdog = rl_watchdog;
ifp->if_init = rl_init;
ifp->if_baudrate = 10000000;
ifp->if_snd.ifq_maxlen = RL_IFQ_MAXLEN;
ifp->if_capenable = ifp->if_capabilities;
callout_handle_init(&sc->rl_stat_ch);
/*
* Call MI attach routine.
*/
ether_ifattach(ifp, eaddr);
/* Hook interrupt last to avoid having to lock softc */
error = bus_setup_intr(dev, sc->rl_irq, INTR_TYPE_NET,
RL_ISCPLUS(sc) ? rl_intrcplus : rl_intr, sc, &sc->rl_intrhand);
if (error) {
printf("rl%d: couldn't set up irq\n", unit);
ether_ifdetach(ifp);
goto fail;
}
fail:
if (error)
rl_detach(dev);
return (error);
}
/*
* Shutdown hardware and free up resources. This can be called any
* time after the mutex has been initialized. It is called in both
* the error case in attach and the normal detach case so it needs
* to be careful about only freeing resources that have actually been
* allocated.
*/
static int
rl_detach(dev)
device_t dev;
{
struct rl_softc *sc;
struct ifnet *ifp;
int i;
sc = device_get_softc(dev);
KASSERT(mtx_initialized(&sc->rl_mtx), ("rl mutex not initialized"));
RL_LOCK(sc);
ifp = &sc->arpcom.ac_if;
/* These should only be active if attach succeeded */
if (device_is_attached(dev)) {
rl_stop(sc);
ether_ifdetach(ifp);
}
if (sc->rl_miibus)
device_delete_child(dev, sc->rl_miibus);
bus_generic_detach(dev);
if (sc->rl_intrhand)
bus_teardown_intr(dev, sc->rl_irq, sc->rl_intrhand);
if (sc->rl_irq)
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->rl_irq);
if (sc->rl_res)
bus_release_resource(dev, RL_RES, RL_RID, sc->rl_res);
if (RL_ISCPLUS(sc)) {
/* Unload and free the RX DMA ring memory and map */
if (sc->rl_ldata.rl_rx_list_tag) {
bus_dmamap_unload(sc->rl_ldata.rl_rx_list_tag,
sc->rl_ldata.rl_rx_list_map);
bus_dmamem_free(sc->rl_ldata.rl_rx_list_tag,
sc->rl_ldata.rl_rx_list,
sc->rl_ldata.rl_rx_list_map);
bus_dma_tag_destroy(sc->rl_ldata.rl_rx_list_tag);
}
/* Unload and free the TX DMA ring memory and map */
if (sc->rl_ldata.rl_tx_list_tag) {
bus_dmamap_unload(sc->rl_ldata.rl_tx_list_tag,
sc->rl_ldata.rl_tx_list_map);
bus_dmamem_free(sc->rl_ldata.rl_tx_list_tag,
sc->rl_ldata.rl_tx_list,
sc->rl_ldata.rl_tx_list_map);
bus_dma_tag_destroy(sc->rl_ldata.rl_tx_list_tag);
}
/* Destroy all the RX and TX buffer maps */
if (sc->rl_ldata.rl_mtag) {
for (i = 0; i < RL_TX_DESC_CNT; i++)
bus_dmamap_destroy(sc->rl_ldata.rl_mtag,
sc->rl_ldata.rl_tx_dmamap[i]);
for (i = 0; i < RL_RX_DESC_CNT; i++)
bus_dmamap_destroy(sc->rl_ldata.rl_mtag,
sc->rl_ldata.rl_rx_dmamap[i]);
bus_dma_tag_destroy(sc->rl_ldata.rl_mtag);
}
/* Unload and free the stats buffer and map */
if (sc->rl_ldata.rl_stag) {
bus_dmamap_unload(sc->rl_ldata.rl_stag,
sc->rl_ldata.rl_rx_list_map);
bus_dmamem_free(sc->rl_ldata.rl_stag,
sc->rl_ldata.rl_stats,
sc->rl_ldata.rl_smap);
bus_dma_tag_destroy(sc->rl_ldata.rl_stag);
}
} else {
if (sc->rl_tag) {
bus_dmamap_unload(sc->rl_tag,
sc->rl_cdata.rl_rx_dmamap);
bus_dmamem_free(sc->rl_tag, sc->rl_cdata.rl_rx_buf,
sc->rl_cdata.rl_rx_dmamap);
bus_dma_tag_destroy(sc->rl_tag);
}
}
if (sc->rl_parent_tag)
bus_dma_tag_destroy(sc->rl_parent_tag);
RL_UNLOCK(sc);
mtx_destroy(&sc->rl_mtx);
return(0);
}
/*
* Initialize the transmit descriptors.
*/
static int
rl_list_tx_init(sc)
struct rl_softc *sc;
{
struct rl_chain_data *cd;
int i;
cd = &sc->rl_cdata;
for (i = 0; i < RL_TX_LIST_CNT; i++) {
cd->rl_tx_chain[i] = NULL;
CSR_WRITE_4(sc,
RL_TXADDR0 + (i * sizeof(u_int32_t)), 0x0000000);
}
sc->rl_cdata.cur_tx = 0;
sc->rl_cdata.last_tx = 0;
return(0);
}
static int
rl_newbuf (sc, idx, m)
struct rl_softc *sc;
int idx;
struct mbuf *m;
{
struct rl_dmaload_arg arg;
struct mbuf *n = NULL;
int error;
if (m == NULL) {
n = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
if (n == NULL)
return(ENOBUFS);
m = n;
} else
m->m_data = m->m_ext.ext_buf;
/*
* Initialize mbuf length fields and fixup
* alignment so that the frame payload is
* longword aligned.
*/
m->m_len = m->m_pkthdr.len = 1536;
m_adj(m, ETHER_ALIGN);
arg.sc = sc;
arg.rl_idx = idx;
arg.rl_maxsegs = 1;
arg.rl_flags = 0;
arg.rl_ring = sc->rl_ldata.rl_rx_list;
error = bus_dmamap_load_mbuf(sc->rl_ldata.rl_mtag,
sc->rl_ldata.rl_rx_dmamap[idx], m, rl_dma_map_desc,
&arg, BUS_DMA_NOWAIT);
if (error || arg.rl_maxsegs != 1) {
if (n != NULL)
m_freem(n);
return (ENOMEM);
}
sc->rl_ldata.rl_rx_list[idx].rl_cmdstat |= htole32(RL_RDESC_CMD_OWN);
sc->rl_ldata.rl_rx_mbuf[idx] = m;
bus_dmamap_sync(sc->rl_ldata.rl_mtag,
sc->rl_ldata.rl_rx_dmamap[idx],
BUS_DMASYNC_PREREAD);
return(0);
}
static int
rl_tx_list_init(sc)
struct rl_softc *sc;
{
bzero ((char *)sc->rl_ldata.rl_tx_list, RL_TX_LIST_SZ);
bzero ((char *)&sc->rl_ldata.rl_tx_mbuf,
(RL_TX_DESC_CNT * sizeof(struct mbuf *)));
bus_dmamap_sync(sc->rl_ldata.rl_tx_list_tag,
sc->rl_ldata.rl_tx_list_map, BUS_DMASYNC_PREWRITE);
sc->rl_ldata.rl_tx_prodidx = 0;
sc->rl_ldata.rl_tx_considx = 0;
sc->rl_ldata.rl_tx_free = RL_TX_DESC_CNT;
return(0);
}
static int
rl_rx_list_init(sc)
struct rl_softc *sc;
{
int i;
bzero ((char *)sc->rl_ldata.rl_rx_list, RL_RX_LIST_SZ);
bzero ((char *)&sc->rl_ldata.rl_rx_mbuf,
(RL_RX_DESC_CNT * sizeof(struct mbuf *)));
for (i = 0; i < RL_RX_DESC_CNT; i++) {
if (rl_newbuf(sc, i, NULL) == ENOBUFS)
return(ENOBUFS);
}
/* Flush the RX descriptors */
bus_dmamap_sync(sc->rl_ldata.rl_rx_list_tag,
sc->rl_ldata.rl_rx_list_map,
BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD);
sc->rl_ldata.rl_rx_prodidx = 0;
return(0);
}
/*
* RX handler for C+. This is pretty much like any other
* descriptor-based RX handler.
*/
static void
rl_rxeofcplus(sc)
struct rl_softc *sc;
{
struct mbuf *m;
struct ifnet *ifp;
int i, total_len;
struct rl_desc *cur_rx;
u_int32_t rxstat, rxvlan;
ifp = &sc->arpcom.ac_if;
i = sc->rl_ldata.rl_rx_prodidx;
/* Invalidate the descriptor memory */
bus_dmamap_sync(sc->rl_ldata.rl_rx_list_tag,
sc->rl_ldata.rl_rx_list_map,
BUS_DMASYNC_POSTREAD);
while (!RL_OWN(&sc->rl_ldata.rl_rx_list[i])) {
cur_rx = &sc->rl_ldata.rl_rx_list[i];
m = sc->rl_ldata.rl_rx_mbuf[i];
total_len = RL_RXBYTES(cur_rx) - ETHER_CRC_LEN;
rxstat = le32toh(cur_rx->rl_cmdstat);
rxvlan = le32toh(cur_rx->rl_vlanctl);
/* Invalidate the RX mbuf and unload its map */
bus_dmamap_sync(sc->rl_ldata.rl_mtag,
sc->rl_ldata.rl_rx_dmamap[i],
BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->rl_ldata.rl_mtag,
sc->rl_ldata.rl_rx_dmamap[i]);
/*
* NOTE: For some reason that I can't comprehend,
* the RealTek engineers decided not to implement
* the 'frame alignment error' bit in the 8169's
* status word. Unfortunately, rather than simply
* mark the bit as 'reserved,' they took it away
* completely and shifted the other status bits
* over one slot. The OWN, EOR, FS and LS bits are
* still in the same places, as is the frame length
* field. We have already extracted the frame length
* and checked the OWN bit, so to work around this
* problem, we shift the status bits one space to
* the right so that we can evaluate everything else
* correctly.
*/
if (sc->rl_type == RL_8169)
rxstat >>= 1;
if (rxstat & RL_RDESC_STAT_RXERRSUM) {
ifp->if_ierrors++;
rl_newbuf(sc, i, m);
RL_DESC_INC(i);
continue;
}
/*
* If allocating a replacement mbuf fails,
* reload the current one.
*/
if (rl_newbuf(sc, i, NULL)) {
ifp->if_ierrors++;
rl_newbuf(sc, i, m);
RL_DESC_INC(i);
continue;
}
RL_DESC_INC(i);
ifp->if_ipackets++;
m->m_pkthdr.len = m->m_len = total_len;
m->m_pkthdr.rcvif = ifp;
/* Do RX checksumming if enabled */
if (ifp->if_capenable & IFCAP_RXCSUM) {
/* Check IP header checksum */
if (rxstat & RL_RDESC_STAT_PROTOID)
m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
if (!(rxstat & RL_RDESC_STAT_IPSUMBAD))
m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
/* Check TCP/UDP checksum */
if ((RL_TCPPKT(rxstat) &&
!(rxstat & RL_RDESC_STAT_TCPSUMBAD)) ||
(RL_UDPPKT(rxstat) &&
!(rxstat & RL_RDESC_STAT_UDPSUMBAD))) {
m->m_pkthdr.csum_flags |=
CSUM_DATA_VALID|CSUM_PSEUDO_HDR;
m->m_pkthdr.csum_data = 0xffff;
}
}
if (rxvlan & RL_RDESC_VLANCTL_TAG)
VLAN_INPUT_TAG(ifp, m,
ntohs((rxvlan & RL_RDESC_VLANCTL_DATA)), continue);
(*ifp->if_input)(ifp, m);
}
/* Flush the RX DMA ring */
bus_dmamap_sync(sc->rl_ldata.rl_rx_list_tag,
sc->rl_ldata.rl_rx_list_map,
BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD);
sc->rl_ldata.rl_rx_prodidx = i;
return;
}
/*
* A frame has been uploaded: pass the resulting mbuf chain up to
* the higher level protocols.
*
* You know there's something wrong with a PCI bus-master chip design
* when you have to use m_devget().
*
* The receive operation is badly documented in the datasheet, so I'll
* attempt to document it here. The driver provides a buffer area and
* places its base address in the RX buffer start address register.
* The chip then begins copying frames into the RX buffer. Each frame
* is preceded by a 32-bit RX status word which specifies the length
* of the frame and certain other status bits. Each frame (starting with
* the status word) is also 32-bit aligned. The frame length is in the
* first 16 bits of the status word; the lower 15 bits correspond with
* the 'rx status register' mentioned in the datasheet.
*
* Note: to make the Alpha happy, the frame payload needs to be aligned
* on a 32-bit boundary. To achieve this, we pass RL_ETHER_ALIGN (2 bytes)
* as the offset argument to m_devget().
*/
static void
rl_rxeof(sc)
struct rl_softc *sc;
{
struct mbuf *m;
struct ifnet *ifp;
int total_len = 0;
u_int32_t rxstat;
caddr_t rxbufpos;
int wrap = 0;
u_int16_t cur_rx;
u_int16_t limit;
u_int16_t rx_bytes = 0, max_bytes;
ifp = &sc->arpcom.ac_if;
bus_dmamap_sync(sc->rl_tag, sc->rl_cdata.rl_rx_dmamap,
BUS_DMASYNC_POSTREAD);
cur_rx = (CSR_READ_2(sc, RL_CURRXADDR) + 16) % RL_RXBUFLEN;
/* Do not try to read past this point. */
limit = CSR_READ_2(sc, RL_CURRXBUF) % RL_RXBUFLEN;
if (limit < cur_rx)
max_bytes = (RL_RXBUFLEN - cur_rx) + limit;
else
max_bytes = limit - cur_rx;
while((CSR_READ_1(sc, RL_COMMAND) & RL_CMD_EMPTY_RXBUF) == 0) {
#ifdef DEVICE_POLLING
if (ifp->if_flags & IFF_POLLING) {
if (sc->rxcycles <= 0)
break;
sc->rxcycles--;
}
#endif /* DEVICE_POLLING */
rxbufpos = sc->rl_cdata.rl_rx_buf + cur_rx;
rxstat = le32toh(*(u_int32_t *)rxbufpos);
/*
* Here's a totally undocumented fact for you. When the
* RealTek chip is in the process of copying a packet into
* RAM for you, the length will be 0xfff0. If you spot a
* packet header with this value, you need to stop. The
* datasheet makes absolutely no mention of this and
* RealTek should be shot for this.
*/
if ((u_int16_t)(rxstat >> 16) == RL_RXSTAT_UNFINISHED)
break;
if (!(rxstat & RL_RXSTAT_RXOK)) {
ifp->if_ierrors++;
rl_init(sc);
return;
}
/* No errors; receive the packet. */
total_len = rxstat >> 16;
rx_bytes += total_len + 4;
/*
* XXX The RealTek chip includes the CRC with every
* received frame, and there's no way to turn this
* behavior off (at least, I can't find anything in
* the manual that explains how to do it) so we have
* to trim off the CRC manually.
*/
total_len -= ETHER_CRC_LEN;
/*
* Avoid trying to read more bytes than we know
* the chip has prepared for us.
*/
if (rx_bytes > max_bytes)
break;
rxbufpos = sc->rl_cdata.rl_rx_buf +
((cur_rx + sizeof(u_int32_t)) % RL_RXBUFLEN);
if (rxbufpos == (sc->rl_cdata.rl_rx_buf + RL_RXBUFLEN))
rxbufpos = sc->rl_cdata.rl_rx_buf;
wrap = (sc->rl_cdata.rl_rx_buf + RL_RXBUFLEN) - rxbufpos;
if (total_len > wrap) {
m = m_devget(rxbufpos, total_len, RL_ETHER_ALIGN, ifp,
NULL);
if (m == NULL) {
ifp->if_ierrors++;
} else {
m_copyback(m, wrap, total_len - wrap,
sc->rl_cdata.rl_rx_buf);
}
cur_rx = (total_len - wrap + ETHER_CRC_LEN);
} else {
m = m_devget(rxbufpos, total_len, RL_ETHER_ALIGN, ifp,
NULL);
if (m == NULL) {
ifp->if_ierrors++;
}
cur_rx += total_len + 4 + ETHER_CRC_LEN;
}
/*
* Round up to 32-bit boundary.
*/
cur_rx = (cur_rx + 3) & ~3;
CSR_WRITE_2(sc, RL_CURRXADDR, cur_rx - 16);
if (m == NULL)
continue;
ifp->if_ipackets++;
(*ifp->if_input)(ifp, m);
}
return;
}
static void
rl_txeofcplus(sc)
struct rl_softc *sc;
{
struct ifnet *ifp;
u_int32_t txstat;
int idx;
ifp = &sc->arpcom.ac_if;
idx = sc->rl_ldata.rl_tx_considx;
/* Invalidate the TX descriptor list */
bus_dmamap_sync(sc->rl_ldata.rl_tx_list_tag,
sc->rl_ldata.rl_tx_list_map,
BUS_DMASYNC_POSTREAD);
while (idx != sc->rl_ldata.rl_tx_prodidx) {
txstat = le32toh(sc->rl_ldata.rl_tx_list[idx].rl_cmdstat);
if (txstat & RL_TDESC_CMD_OWN)
break;
/*
* We only stash mbufs in the last descriptor
* in a fragment chain, which also happens to
* be the only place where the TX status bits
* are valid.
*/
if (txstat & RL_TDESC_CMD_EOF) {
m_freem(sc->rl_ldata.rl_tx_mbuf[idx]);
sc->rl_ldata.rl_tx_mbuf[idx] = NULL;
bus_dmamap_unload(sc->rl_ldata.rl_mtag,
sc->rl_ldata.rl_tx_dmamap[idx]);
if (txstat & (RL_TDESC_STAT_EXCESSCOL|
RL_TDESC_STAT_COLCNT))
ifp->if_collisions++;
if (txstat & RL_TDESC_STAT_TXERRSUM)
ifp->if_oerrors++;
else
ifp->if_opackets++;
}
sc->rl_ldata.rl_tx_free++;
RL_DESC_INC(idx);
}
/* No changes made to the TX ring, so no flush needed */
if (idx != sc->rl_ldata.rl_tx_considx) {
sc->rl_ldata.rl_tx_considx = idx;
ifp->if_flags &= ~IFF_OACTIVE;
ifp->if_timer = 0;
}
return;
}
/*
* A frame was downloaded to the chip. It's safe for us to clean up
* the list buffers.
*/
static void
rl_txeof(sc)
struct rl_softc *sc;
{
struct ifnet *ifp;
u_int32_t txstat;
ifp = &sc->arpcom.ac_if;
/*
* Go through our tx list and free mbufs for those
* frames that have been uploaded.
*/
do {
txstat = CSR_READ_4(sc, RL_LAST_TXSTAT(sc));
if (!(txstat & (RL_TXSTAT_TX_OK|
RL_TXSTAT_TX_UNDERRUN|RL_TXSTAT_TXABRT)))
break;
ifp->if_collisions += (txstat & RL_TXSTAT_COLLCNT) >> 24;
if (RL_LAST_TXMBUF(sc) != NULL) {
bus_dmamap_unload(sc->rl_tag, RL_LAST_DMAMAP(sc));
bus_dmamap_destroy(sc->rl_tag, RL_LAST_DMAMAP(sc));
m_freem(RL_LAST_TXMBUF(sc));
RL_LAST_TXMBUF(sc) = NULL;
}
if (txstat & RL_TXSTAT_TX_OK)
ifp->if_opackets++;
else {
int oldthresh;
ifp->if_oerrors++;
if ((txstat & RL_TXSTAT_TXABRT) ||
(txstat & RL_TXSTAT_OUTOFWIN))
CSR_WRITE_4(sc, RL_TXCFG, RL_TXCFG_CONFIG);
oldthresh = sc->rl_txthresh;
/* error recovery */
rl_reset(sc);
rl_init(sc);
/*
* If there was a transmit underrun,
* bump the TX threshold.
*/
if (txstat & RL_TXSTAT_TX_UNDERRUN)
sc->rl_txthresh = oldthresh + 32;
return;
}
RL_INC(sc->rl_cdata.last_tx);
ifp->if_flags &= ~IFF_OACTIVE;
} while (sc->rl_cdata.last_tx != sc->rl_cdata.cur_tx);
ifp->if_timer =
(sc->rl_cdata.last_tx == sc->rl_cdata.cur_tx) ? 0 : 5;
return;
}
static void
rl_tick(xsc)
void *xsc;
{
struct rl_softc *sc;
struct mii_data *mii;
sc = xsc;
RL_LOCK(sc);
mii = device_get_softc(sc->rl_miibus);
mii_tick(mii);
sc->rl_stat_ch = timeout(rl_tick, sc, hz);
RL_UNLOCK(sc);
return;
}
#ifdef DEVICE_POLLING
static void
rl_poll (struct ifnet *ifp, enum poll_cmd cmd, int count)
{
struct rl_softc *sc = ifp->if_softc;
RL_LOCK(sc);
if (cmd == POLL_DEREGISTER) { /* final call, enable interrupts */
if (RL_ISCPLUS(sc))
CSR_WRITE_2(sc, RL_IMR, RL_INTRS_CPLUS);
else
CSR_WRITE_2(sc, RL_IMR, RL_INTRS);
goto done;
}
sc->rxcycles = count;
if (RL_ISCPLUS(sc)) {
rl_rxeofcplus(sc);
rl_txeofcplus(sc);
} else {
rl_rxeof(sc);
rl_txeof(sc);
}
if (ifp->if_snd.ifq_head != NULL)
(*ifp->if_start)(ifp);
if (cmd == POLL_AND_CHECK_STATUS) { /* also check status register */
u_int16_t status;
status = CSR_READ_2(sc, RL_ISR);
if (status == 0xffff)
goto done;
if (status)
CSR_WRITE_2(sc, RL_ISR, status);
/*
* XXX check behaviour on receiver stalls.
*/
if (status & RL_ISR_SYSTEM_ERR) {
rl_reset(sc);
rl_init(sc);
}
}
done:
RL_UNLOCK(sc);
}
#endif /* DEVICE_POLLING */
static void
rl_intrcplus(arg)
void *arg;
{
struct rl_softc *sc;
struct ifnet *ifp;
u_int16_t status;
sc = arg;
if (sc->suspended) {
return;
}
RL_LOCK(sc);
ifp = &sc->arpcom.ac_if;
#ifdef DEVICE_POLLING
if (ifp->if_flags & IFF_POLLING)
goto done;
if (ether_poll_register(rl_poll, ifp)) { /* ok, disable interrupts */
CSR_WRITE_2(sc, RL_IMR, 0x0000);
rl_poll(ifp, 0, 1);
goto done;
}
#endif /* DEVICE_POLLING */
for (;;) {
status = CSR_READ_2(sc, RL_ISR);
/* If the card has gone away the read returns 0xffff. */
if (status == 0xffff)
break;
if (status)
CSR_WRITE_2(sc, RL_ISR, status);
if ((status & RL_INTRS_CPLUS) == 0)
break;
if (status & RL_ISR_RX_OK)
rl_rxeofcplus(sc);
if (status & RL_ISR_RX_ERR)
rl_rxeofcplus(sc);
if ((status & RL_ISR_TIMEOUT_EXPIRED) ||
(status & RL_ISR_TX_ERR) ||
(status & RL_ISR_TX_DESC_UNAVAIL))
rl_txeofcplus(sc);
if (status & RL_ISR_SYSTEM_ERR) {
rl_reset(sc);
rl_init(sc);
}
}
if (ifp->if_snd.ifq_head != NULL)
(*ifp->if_start)(ifp);
#ifdef DEVICE_POLLING
done:
#endif
RL_UNLOCK(sc);
return;
}
static void
rl_intr(arg)
void *arg;
{
struct rl_softc *sc;
struct ifnet *ifp;
u_int16_t status;
sc = arg;
if (sc->suspended) {
return;
}
RL_LOCK(sc);
ifp = &sc->arpcom.ac_if;
#ifdef DEVICE_POLLING
if (ifp->if_flags & IFF_POLLING)
goto done;
if (ether_poll_register(rl_poll, ifp)) { /* ok, disable interrupts */
CSR_WRITE_2(sc, RL_IMR, 0x0000);
rl_poll(ifp, 0, 1);
goto done;
}
#endif /* DEVICE_POLLING */
for (;;) {
status = CSR_READ_2(sc, RL_ISR);
/* If the card has gone away the read returns 0xffff. */
if (status == 0xffff)
break;
if (status)
CSR_WRITE_2(sc, RL_ISR, status);
if ((status & RL_INTRS) == 0)
break;
if (status & RL_ISR_RX_OK)
rl_rxeof(sc);
if (status & RL_ISR_RX_ERR)
rl_rxeof(sc);
if ((status & RL_ISR_TX_OK) || (status & RL_ISR_TX_ERR))
rl_txeof(sc);
if (status & RL_ISR_SYSTEM_ERR) {
rl_reset(sc);
rl_init(sc);
}
}
if (ifp->if_snd.ifq_head != NULL)
(*ifp->if_start)(ifp);
#ifdef DEVICE_POLLING
done:
#endif
RL_UNLOCK(sc);
return;
}
static int
rl_encapcplus(sc, m_head, idx)
struct rl_softc *sc;
struct mbuf *m_head;
int *idx;
{
struct mbuf *m_new = NULL;
struct rl_dmaload_arg arg;
bus_dmamap_t map;
int error;
struct m_tag *mtag;
if (sc->rl_ldata.rl_tx_free < 4)
return(EFBIG);
/*
* Set up checksum offload. Note: checksum offload bits must
* appear in all descriptors of a multi-descriptor transmit
* attempt. (This is according to testing done with an 8169
* chip. I'm not sure if this is a requirement or a bug.)
*/
arg.rl_flags = 0;
if (m_head->m_pkthdr.csum_flags & CSUM_IP)
arg.rl_flags |= RL_TDESC_CMD_IPCSUM;
if (m_head->m_pkthdr.csum_flags & CSUM_TCP)
arg.rl_flags |= RL_TDESC_CMD_TCPCSUM;
if (m_head->m_pkthdr.csum_flags & CSUM_UDP)
arg.rl_flags |= RL_TDESC_CMD_UDPCSUM;
arg.sc = sc;
arg.rl_idx = *idx;
arg.rl_maxsegs = sc->rl_ldata.rl_tx_free;
arg.rl_ring = sc->rl_ldata.rl_tx_list;
map = sc->rl_ldata.rl_tx_dmamap[*idx];
error = bus_dmamap_load_mbuf(sc->rl_ldata.rl_mtag, map,
m_head, rl_dma_map_desc, &arg, BUS_DMA_NOWAIT);
if (error && error != EFBIG) {
printf("rl%d: can't map mbuf (error %d)\n", sc->rl_unit, error);
return(ENOBUFS);
}
/* Too many segments to map, coalesce into a single mbuf */
if (error || arg.rl_maxsegs == 0) {
m_new = m_defrag(m_head, M_DONTWAIT);
if (m_new == NULL)
return(1);
else
m_head = m_new;
arg.sc = sc;
arg.rl_idx = *idx;
arg.rl_maxsegs = sc->rl_ldata.rl_tx_free;
arg.rl_ring = sc->rl_ldata.rl_tx_list;
error = bus_dmamap_load_mbuf(sc->rl_ldata.rl_mtag, map,
m_head, rl_dma_map_desc, &arg, BUS_DMA_NOWAIT);
if (error) {
printf("rl%d: can't map mbuf (error %d)\n",
sc->rl_unit, error);
return(EFBIG);
}
}
/*
* Insure that the map for this transmission
* is placed at the array index of the last descriptor
* in this chain.
*/
sc->rl_ldata.rl_tx_dmamap[*idx] =
sc->rl_ldata.rl_tx_dmamap[arg.rl_idx];
sc->rl_ldata.rl_tx_dmamap[arg.rl_idx] = map;
sc->rl_ldata.rl_tx_mbuf[arg.rl_idx] = m_head;
sc->rl_ldata.rl_tx_free -= arg.rl_maxsegs;
/*
* Set up hardware VLAN tagging. Note: vlan tag info must
* appear in the first descriptor of a multi-descriptor
* transmission attempt.
*/
mtag = VLAN_OUTPUT_TAG(&sc->arpcom.ac_if, m_head);
if (mtag != NULL)
sc->rl_ldata.rl_tx_list[*idx].rl_vlanctl =
htole32(htons(VLAN_TAG_VALUE(mtag)) | RL_TDESC_VLANCTL_TAG);
/* Transfer ownership of packet to the chip. */
sc->rl_ldata.rl_tx_list[arg.rl_idx].rl_cmdstat |=
htole32(RL_TDESC_CMD_OWN);
if (*idx != arg.rl_idx)
sc->rl_ldata.rl_tx_list[*idx].rl_cmdstat |=
htole32(RL_TDESC_CMD_OWN);
RL_DESC_INC(arg.rl_idx);
*idx = arg.rl_idx;
return(0);
}
/*
* Main transmit routine for C+ and gigE NICs.
*/
static void
rl_startcplus(ifp)
struct ifnet *ifp;
{
struct rl_softc *sc;
struct mbuf *m_head = NULL;
int idx;
sc = ifp->if_softc;
RL_LOCK(sc);
idx = sc->rl_ldata.rl_tx_prodidx;
while (sc->rl_ldata.rl_tx_mbuf[idx] == NULL) {
IF_DEQUEUE(&ifp->if_snd, m_head);
if (m_head == NULL)
break;
if (rl_encapcplus(sc, m_head, &idx)) {
IF_PREPEND(&ifp->if_snd, m_head);
ifp->if_flags |= IFF_OACTIVE;
break;
}
/*
* If there's a BPF listener, bounce a copy of this frame
* to him.
*/
BPF_MTAP(ifp, m_head);
}
/* Flush the TX descriptors */
bus_dmamap_sync(sc->rl_ldata.rl_tx_list_tag,
sc->rl_ldata.rl_tx_list_map,
BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD);
sc->rl_ldata.rl_tx_prodidx = idx;
/*
* RealTek put the TX poll request register in a different
* location on the 8169 gigE chip. I don't know why.
*/
if (sc->rl_type == RL_8169)
CSR_WRITE_2(sc, RL_GTXSTART, RL_TXSTART_START);
else
CSR_WRITE_2(sc, RL_TXSTART, RL_TXSTART_START);
/*
* Use the countdown timer for interrupt moderation.
* 'TX done' interrupts are disabled. Instead, we reset the
* countdown timer, which will begin counting until it hits
* the value in the TIMERINT register, and then trigger an
* interrupt. Each time we write to the TIMERCNT register,
* the timer count is reset to 0.
*/
CSR_WRITE_4(sc, RL_TIMERCNT, 1);
RL_UNLOCK(sc);
/*
* Set a timeout in case the chip goes out to lunch.
*/
ifp->if_timer = 5;
return;
}
/*
* Encapsulate an mbuf chain in a descriptor by coupling the mbuf data
* pointers to the fragment pointers.
*/
static int
rl_encap(sc, m_head)
struct rl_softc *sc;
struct mbuf *m_head;
{
struct mbuf *m_new = NULL;
/*
* The RealTek is brain damaged and wants longword-aligned
* TX buffers, plus we can only have one fragment buffer
* per packet. We have to copy pretty much all the time.
*/
m_new = m_defrag(m_head, M_DONTWAIT);
if (m_new == NULL) {
m_freem(m_head);
return(1);
}
m_head = m_new;
/* Pad frames to at least 60 bytes. */
if (m_head->m_pkthdr.len < RL_MIN_FRAMELEN) {
/*
* Make security concious people happy: zero out the
* bytes in the pad area, since we don't know what
* this mbuf cluster buffer's previous user might
* have left in it.
*/
bzero(mtod(m_head, char *) + m_head->m_pkthdr.len,
RL_MIN_FRAMELEN - m_head->m_pkthdr.len);
m_head->m_pkthdr.len +=
(RL_MIN_FRAMELEN - m_head->m_pkthdr.len);
m_head->m_len = m_head->m_pkthdr.len;
}
RL_CUR_TXMBUF(sc) = m_head;
return(0);
}
/*
* Main transmit routine.
*/
static void
rl_start(ifp)
struct ifnet *ifp;
{
struct rl_softc *sc;
struct mbuf *m_head = NULL;
sc = ifp->if_softc;
RL_LOCK(sc);
while(RL_CUR_TXMBUF(sc) == NULL) {
IF_DEQUEUE(&ifp->if_snd, m_head);
if (m_head == NULL)
break;
if (rl_encap(sc, m_head)) {
break;
}
/*
* If there's a BPF listener, bounce a copy of this frame
* to him.
*/
BPF_MTAP(ifp, RL_CUR_TXMBUF(sc));
/*
* Transmit the frame.
*/
bus_dmamap_create(sc->rl_tag, 0, &RL_CUR_DMAMAP(sc));
bus_dmamap_load(sc->rl_tag, RL_CUR_DMAMAP(sc),
mtod(RL_CUR_TXMBUF(sc), void *),
RL_CUR_TXMBUF(sc)->m_pkthdr.len, rl_dma_map_txbuf,
sc, BUS_DMA_NOWAIT);
bus_dmamap_sync(sc->rl_tag, RL_CUR_DMAMAP(sc),
BUS_DMASYNC_PREREAD);
CSR_WRITE_4(sc, RL_CUR_TXSTAT(sc),
RL_TXTHRESH(sc->rl_txthresh) |
RL_CUR_TXMBUF(sc)->m_pkthdr.len);
RL_INC(sc->rl_cdata.cur_tx);
/*
* Set a timeout in case the chip goes out to lunch.
*/
ifp->if_timer = 5;
}
/*
* We broke out of the loop because all our TX slots are
* full. Mark the NIC as busy until it drains some of the
* packets from the queue.
*/
if (RL_CUR_TXMBUF(sc) != NULL)
ifp->if_flags |= IFF_OACTIVE;
RL_UNLOCK(sc);
return;
}
static void
rl_init(xsc)
void *xsc;
{
struct rl_softc *sc = xsc;
struct ifnet *ifp = &sc->arpcom.ac_if;
struct mii_data *mii;
u_int32_t rxcfg = 0;
RL_LOCK(sc);
mii = device_get_softc(sc->rl_miibus);
/*
* Cancel pending I/O and free all RX/TX buffers.
*/
rl_stop(sc);
/*
* Init our MAC address. Even though the chipset
* documentation doesn't mention it, we need to enter "Config
* register write enable" mode to modify the ID registers.
*/
CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_WRITECFG);
CSR_WRITE_4(sc, RL_IDR0, *(u_int32_t *)(&sc->arpcom.ac_enaddr[0]));
CSR_WRITE_4(sc, RL_IDR4, *(u_int32_t *)(&sc->arpcom.ac_enaddr[4]));
CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF);
/*
* For C+ mode, initialize the RX descriptors and mbufs.
*/
if (RL_ISCPLUS(sc)) {
rl_rx_list_init(sc);
rl_tx_list_init(sc);
} else {
/* Init the RX buffer pointer register. */
bus_dmamap_load(sc->rl_tag, sc->rl_cdata.rl_rx_dmamap,
sc->rl_cdata.rl_rx_buf, RL_RXBUFLEN,
rl_dma_map_rxbuf, sc, BUS_DMA_NOWAIT);
bus_dmamap_sync(sc->rl_tag, sc->rl_cdata.rl_rx_dmamap,
BUS_DMASYNC_PREWRITE);
/* Init TX descriptors. */
rl_list_tx_init(sc);
}
/*
* Enable transmit and receive.
*/
CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_TX_ENB|RL_CMD_RX_ENB);
/*
* Set the initial TX and RX configuration.
*/
CSR_WRITE_4(sc, RL_TXCFG, RL_TXCFG_CONFIG);
CSR_WRITE_4(sc, RL_RXCFG, RL_RXCFG_CONFIG);
/* Set the individual bit to receive frames for this host only. */
rxcfg = CSR_READ_4(sc, RL_RXCFG);
rxcfg |= RL_RXCFG_RX_INDIV;
/* If we want promiscuous mode, set the allframes bit. */
if (ifp->if_flags & IFF_PROMISC) {
rxcfg |= RL_RXCFG_RX_ALLPHYS;
CSR_WRITE_4(sc, RL_RXCFG, rxcfg);
} else {
rxcfg &= ~RL_RXCFG_RX_ALLPHYS;
CSR_WRITE_4(sc, RL_RXCFG, rxcfg);
}
/*
* Set capture broadcast bit to capture broadcast frames.
*/
if (ifp->if_flags & IFF_BROADCAST) {
rxcfg |= RL_RXCFG_RX_BROAD;
CSR_WRITE_4(sc, RL_RXCFG, rxcfg);
} else {
rxcfg &= ~RL_RXCFG_RX_BROAD;
CSR_WRITE_4(sc, RL_RXCFG, rxcfg);
}
/*
* Program the multicast filter, if necessary.
*/
rl_setmulti(sc);
#ifdef DEVICE_POLLING
/*
* Disable interrupts if we are polling.
*/
if (ifp->if_flags & IFF_POLLING)
CSR_WRITE_2(sc, RL_IMR, 0);
else /* otherwise ... */
#endif /* DEVICE_POLLING */
/*
* Enable interrupts.
*/
if (RL_ISCPLUS(sc))
CSR_WRITE_2(sc, RL_IMR, RL_INTRS_CPLUS);
else
CSR_WRITE_2(sc, RL_IMR, RL_INTRS);
/* Set initial TX threshold */
sc->rl_txthresh = RL_TX_THRESH_INIT;
/* Start RX/TX process. */
CSR_WRITE_4(sc, RL_MISSEDPKT, 0);
#ifdef notdef
/* Enable receiver and transmitter. */
CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_TX_ENB|RL_CMD_RX_ENB);
#endif
/*
* If this is a C+ capable chip, enable C+ RX and TX mode,
* and load the addresses of the RX and TX lists into the chip.
*/
if (RL_ISCPLUS(sc)) {
CSR_WRITE_2(sc, RL_CPLUS_CMD, RL_CPLUSCMD_RXENB|
RL_CPLUSCMD_TXENB|RL_CPLUSCMD_PCI_MRW|
RL_CPLUSCMD_VLANSTRIP|
(ifp->if_capenable & IFCAP_RXCSUM ?
RL_CPLUSCMD_RXCSUM_ENB : 0));
CSR_WRITE_4(sc, RL_RXLIST_ADDR_HI,
RL_ADDR_HI(sc->rl_ldata.rl_rx_list_addr));
CSR_WRITE_4(sc, RL_RXLIST_ADDR_LO,
RL_ADDR_LO(sc->rl_ldata.rl_rx_list_addr));
CSR_WRITE_4(sc, RL_TXLIST_ADDR_HI,
RL_ADDR_HI(sc->rl_ldata.rl_tx_list_addr));
CSR_WRITE_4(sc, RL_TXLIST_ADDR_LO,
RL_ADDR_LO(sc->rl_ldata.rl_tx_list_addr));
CSR_WRITE_1(sc, RL_EARLY_TX_THRESH, RL_EARLYTXTHRESH_CNT);
/*
* Initialize the timer interrupt register so that
* a timer interrupt will be generated once the timer
* reaches a certain number of ticks. The timer is
* reloaded on each transmit. This gives us TX interrupt
* moderation, which dramatically improves TX frame rate.
*/
if (sc->rl_type == RL_8169)
CSR_WRITE_4(sc, RL_TIMERINT_8169, 0x800);
else
CSR_WRITE_4(sc, RL_TIMERINT, 0x400);
/*
* For 8169 gigE NICs, set the max allowed RX packet
* size so we can receive jumbo frames.
*/
if (sc->rl_type == RL_8169)
CSR_WRITE_2(sc, RL_MAXRXPKTLEN, RL_PKTSZ(16384));
}
mii_mediachg(mii);
CSR_WRITE_1(sc, RL_CFG1, RL_CFG1_DRVLOAD|RL_CFG1_FULLDUPLEX);
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
sc->rl_stat_ch = timeout(rl_tick, sc, hz);
RL_UNLOCK(sc);
return;
}
/*
* Set media options.
*/
static int
rl_ifmedia_upd(ifp)
struct ifnet *ifp;
{
struct rl_softc *sc;
struct mii_data *mii;
sc = ifp->if_softc;
mii = device_get_softc(sc->rl_miibus);
mii_mediachg(mii);
return(0);
}
/*
* Report current media status.
*/
static void
rl_ifmedia_sts(ifp, ifmr)
struct ifnet *ifp;
struct ifmediareq *ifmr;
{
struct rl_softc *sc;
struct mii_data *mii;
sc = ifp->if_softc;
mii = device_get_softc(sc->rl_miibus);
mii_pollstat(mii);
ifmr->ifm_active = mii->mii_media_active;
ifmr->ifm_status = mii->mii_media_status;
return;
}
static int
rl_ioctl(ifp, command, data)
struct ifnet *ifp;
u_long command;
caddr_t data;
{
struct rl_softc *sc = ifp->if_softc;
struct ifreq *ifr = (struct ifreq *) data;
struct mii_data *mii;
int error = 0;
RL_LOCK(sc);
switch(command) {
case SIOCSIFFLAGS:
if (ifp->if_flags & IFF_UP) {
rl_init(sc);
} else {
if (ifp->if_flags & IFF_RUNNING)
rl_stop(sc);
}
error = 0;
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
rl_setmulti(sc);
error = 0;
break;
case SIOCGIFMEDIA:
case SIOCSIFMEDIA:
mii = device_get_softc(sc->rl_miibus);
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
break;
case SIOCSIFCAP:
ifp->if_capenable = ifr->ifr_reqcap;
if (ifp->if_capenable & IFCAP_TXCSUM)
ifp->if_hwassist = RL_CSUM_FEATURES;
else
ifp->if_hwassist = 0;
if (ifp->if_flags & IFF_RUNNING)
rl_init(sc);
break;
default:
error = ether_ioctl(ifp, command, data);
break;
}
RL_UNLOCK(sc);
return(error);
}
static void
rl_watchdog(ifp)
struct ifnet *ifp;
{
struct rl_softc *sc;
sc = ifp->if_softc;
RL_LOCK(sc);
printf("rl%d: watchdog timeout\n", sc->rl_unit);
ifp->if_oerrors++;
if (RL_ISCPLUS(sc)) {
rl_txeofcplus(sc);
rl_rxeofcplus(sc);
} else {
rl_txeof(sc);
rl_rxeof(sc);
}
rl_init(sc);
RL_UNLOCK(sc);
return;
}
/*
* Stop the adapter and free any mbufs allocated to the
* RX and TX lists.
*/
static void
rl_stop(sc)
struct rl_softc *sc;
{
register int i;
struct ifnet *ifp;
RL_LOCK(sc);
ifp = &sc->arpcom.ac_if;
ifp->if_timer = 0;
untimeout(rl_tick, sc, sc->rl_stat_ch);
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
#ifdef DEVICE_POLLING
ether_poll_deregister(ifp);
#endif /* DEVICE_POLLING */
CSR_WRITE_1(sc, RL_COMMAND, 0x00);
CSR_WRITE_2(sc, RL_IMR, 0x0000);
if (RL_ISCPLUS(sc)) {
/* Free the TX list buffers. */
for (i = 0; i < RL_TX_DESC_CNT; i++) {
if (sc->rl_ldata.rl_tx_mbuf[i] != NULL) {
bus_dmamap_unload(sc->rl_ldata.rl_mtag,
sc->rl_ldata.rl_tx_dmamap[i]);
m_freem(sc->rl_ldata.rl_tx_mbuf[i]);
sc->rl_ldata.rl_tx_mbuf[i] = NULL;
}
}
/* Free the RX list buffers. */
for (i = 0; i < RL_RX_DESC_CNT; i++) {
if (sc->rl_ldata.rl_rx_mbuf[i] != NULL) {
bus_dmamap_unload(sc->rl_ldata.rl_mtag,
sc->rl_ldata.rl_rx_dmamap[i]);
m_freem(sc->rl_ldata.rl_rx_mbuf[i]);
sc->rl_ldata.rl_rx_mbuf[i] = NULL;
}
}
} else {
bus_dmamap_unload(sc->rl_tag, sc->rl_cdata.rl_rx_dmamap);
/*
* Free the TX list buffers.
*/
for (i = 0; i < RL_TX_LIST_CNT; i++) {
if (sc->rl_cdata.rl_tx_chain[i] != NULL) {
bus_dmamap_unload(sc->rl_tag,
sc->rl_cdata.rl_tx_dmamap[i]);
bus_dmamap_destroy(sc->rl_tag,
sc->rl_cdata.rl_tx_dmamap[i]);
m_freem(sc->rl_cdata.rl_tx_chain[i]);
sc->rl_cdata.rl_tx_chain[i] = NULL;
CSR_WRITE_4(sc, RL_TXADDR0 + i, 0x0000000);
}
}
}
RL_UNLOCK(sc);
return;
}
/*
* Device suspend routine. Stop the interface and save some PCI
* settings in case the BIOS doesn't restore them properly on
* resume.
*/
static int
rl_suspend(dev)
device_t dev;
{
register int i;
struct rl_softc *sc;
sc = device_get_softc(dev);
rl_stop(sc);
for (i = 0; i < 5; i++)
sc->saved_maps[i] = pci_read_config(dev, PCIR_MAPS + i * 4, 4);
sc->saved_biosaddr = pci_read_config(dev, PCIR_BIOS, 4);
sc->saved_intline = pci_read_config(dev, PCIR_INTLINE, 1);
sc->saved_cachelnsz = pci_read_config(dev, PCIR_CACHELNSZ, 1);
sc->saved_lattimer = pci_read_config(dev, PCIR_LATTIMER, 1);
sc->suspended = 1;
return (0);
}
/*
* Device resume routine. Restore some PCI settings in case the BIOS
* doesn't, re-enable busmastering, and restart the interface if
* appropriate.
*/
static int
rl_resume(dev)
device_t dev;
{
register int i;
struct rl_softc *sc;
struct ifnet *ifp;
sc = device_get_softc(dev);
ifp = &sc->arpcom.ac_if;
/* better way to do this? */
for (i = 0; i < 5; i++)
pci_write_config(dev, PCIR_MAPS + i * 4, sc->saved_maps[i], 4);
pci_write_config(dev, PCIR_BIOS, sc->saved_biosaddr, 4);
pci_write_config(dev, PCIR_INTLINE, sc->saved_intline, 1);
pci_write_config(dev, PCIR_CACHELNSZ, sc->saved_cachelnsz, 1);
pci_write_config(dev, PCIR_LATTIMER, sc->saved_lattimer, 1);
/* reenable busmastering */
pci_enable_busmaster(dev);
pci_enable_io(dev, RL_RES);
/* reinitialize interface if necessary */
if (ifp->if_flags & IFF_UP)
rl_init(sc);
sc->suspended = 0;
return (0);
}
/*
* Stop all chip I/O so that the kernel's probe routines don't
* get confused by errant DMAs when rebooting.
*/
static void
rl_shutdown(dev)
device_t dev;
{
struct rl_softc *sc;
sc = device_get_softc(dev);
rl_stop(sc);
return;
}
Reference in New Issue View Git Blame Copy Permalink