19d3b47b92
Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error prone - task. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts.
359 lines
8.9 KiB
C
359 lines
8.9 KiB
C
/*-
|
|
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
|
|
*
|
|
* Copyright (c) 2012 Adrian Chadd <adrian@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include "opt_ddb.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/cons.h>
|
|
#include <sys/kdb.h>
|
|
#include <sys/reboot.h>
|
|
|
|
#include <vm/vm.h>
|
|
#include <vm/vm_page.h>
|
|
|
|
#include <net/ethernet.h>
|
|
|
|
#include <machine/clock.h>
|
|
#include <machine/cpu.h>
|
|
#include <machine/cpuregs.h>
|
|
#include <machine/hwfunc.h>
|
|
#include <machine/md_var.h>
|
|
#include <machine/trap.h>
|
|
#include <machine/vmparam.h>
|
|
|
|
#include <mips/atheros/ar71xxreg.h>
|
|
#include <mips/atheros/ar933xreg.h>
|
|
|
|
#include <mips/atheros/ar71xx_cpudef.h>
|
|
#include <mips/atheros/ar71xx_setup.h>
|
|
|
|
#include <mips/atheros/ar71xx_chip.h>
|
|
#include <mips/atheros/ar933x_chip.h>
|
|
|
|
static void
|
|
ar933x_chip_detect_mem_size(void)
|
|
{
|
|
}
|
|
|
|
static void
|
|
ar933x_chip_detect_sys_frequency(void)
|
|
{
|
|
uint32_t clock_ctrl;
|
|
uint32_t cpu_config;
|
|
uint32_t freq;
|
|
uint32_t t;
|
|
|
|
t = ATH_READ_REG(AR933X_RESET_REG_BOOTSTRAP);
|
|
if (t & AR933X_BOOTSTRAP_REF_CLK_40)
|
|
u_ar71xx_refclk = (40 * 1000 * 1000);
|
|
else
|
|
u_ar71xx_refclk = (25 * 1000 * 1000);
|
|
|
|
clock_ctrl = ATH_READ_REG(AR933X_PLL_CLOCK_CTRL_REG);
|
|
if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) {
|
|
u_ar71xx_cpu_freq = u_ar71xx_refclk;
|
|
u_ar71xx_ahb_freq = u_ar71xx_refclk;
|
|
u_ar71xx_ddr_freq = u_ar71xx_refclk;
|
|
} else {
|
|
cpu_config = ATH_READ_REG(AR933X_PLL_CPU_CONFIG_REG);
|
|
|
|
t = (cpu_config >> AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
|
|
AR933X_PLL_CPU_CONFIG_REFDIV_MASK;
|
|
freq = u_ar71xx_refclk / t;
|
|
|
|
t = (cpu_config >> AR933X_PLL_CPU_CONFIG_NINT_SHIFT) &
|
|
AR933X_PLL_CPU_CONFIG_NINT_MASK;
|
|
freq *= t;
|
|
|
|
t = (cpu_config >> AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
|
|
AR933X_PLL_CPU_CONFIG_OUTDIV_MASK;
|
|
if (t == 0)
|
|
t = 1;
|
|
|
|
freq >>= t;
|
|
|
|
t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT) &
|
|
AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK) + 1;
|
|
u_ar71xx_cpu_freq = freq / t;
|
|
|
|
t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT) &
|
|
AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK) + 1;
|
|
u_ar71xx_ddr_freq = freq / t;
|
|
|
|
t = ((clock_ctrl >> AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT) &
|
|
AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1;
|
|
u_ar71xx_ahb_freq = freq / t;
|
|
}
|
|
|
|
/*
|
|
* On the AR933x, the UART frequency is the reference clock,
|
|
* not the AHB bus clock.
|
|
*/
|
|
u_ar71xx_uart_freq = u_ar71xx_refclk;
|
|
|
|
/*
|
|
* XXX TODO: check whether the mdio frequency is always the
|
|
* refclock frequency, or whether it's variable like on the
|
|
* AR934x.
|
|
*/
|
|
u_ar71xx_mdio_freq = u_ar71xx_refclk;
|
|
|
|
/*
|
|
* XXX check what the watchdog frequency should be?
|
|
*/
|
|
u_ar71xx_wdt_freq = u_ar71xx_ahb_freq;
|
|
}
|
|
|
|
static void
|
|
ar933x_chip_device_stop(uint32_t mask)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = ATH_READ_REG(AR933X_RESET_REG_RESET_MODULE);
|
|
ATH_WRITE_REG(AR933X_RESET_REG_RESET_MODULE, reg | mask);
|
|
}
|
|
|
|
static void
|
|
ar933x_chip_device_start(uint32_t mask)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = ATH_READ_REG(AR933X_RESET_REG_RESET_MODULE);
|
|
ATH_WRITE_REG(AR933X_RESET_REG_RESET_MODULE, reg & ~mask);
|
|
}
|
|
|
|
static int
|
|
ar933x_chip_device_stopped(uint32_t mask)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = ATH_READ_REG(AR933X_RESET_REG_RESET_MODULE);
|
|
return ((reg & mask) == mask);
|
|
}
|
|
|
|
static void
|
|
ar933x_chip_set_mii_speed(uint32_t unit, uint32_t speed)
|
|
{
|
|
|
|
/* XXX TODO */
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* XXX TODO !!
|
|
*/
|
|
static void
|
|
ar933x_chip_set_pll_ge(int unit, int speed, uint32_t pll)
|
|
{
|
|
|
|
switch (unit) {
|
|
case 0:
|
|
/* XXX TODO */
|
|
break;
|
|
case 1:
|
|
/* XXX TODO */
|
|
break;
|
|
default:
|
|
printf("%s: invalid PLL set for arge unit: %d\n",
|
|
__func__, unit);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void
|
|
ar933x_chip_ddr_flush(ar71xx_flush_ddr_id_t id)
|
|
{
|
|
|
|
switch (id) {
|
|
case AR71XX_CPU_DDR_FLUSH_GE0:
|
|
ar71xx_ddr_flush(AR933X_DDR_REG_FLUSH_GE0);
|
|
break;
|
|
case AR71XX_CPU_DDR_FLUSH_GE1:
|
|
ar71xx_ddr_flush(AR933X_DDR_REG_FLUSH_GE1);
|
|
break;
|
|
case AR71XX_CPU_DDR_FLUSH_USB:
|
|
ar71xx_ddr_flush(AR933X_DDR_REG_FLUSH_USB);
|
|
break;
|
|
case AR71XX_CPU_DDR_FLUSH_WMAC:
|
|
ar71xx_ddr_flush(AR933X_DDR_REG_FLUSH_WMAC);
|
|
break;
|
|
default:
|
|
printf("%s: invalid DDR flush id (%d)\n", __func__, id);
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
static uint32_t
|
|
ar933x_chip_get_eth_pll(unsigned int mac, int speed)
|
|
{
|
|
uint32_t pll;
|
|
|
|
switch (speed) {
|
|
case 10:
|
|
pll = AR933X_PLL_VAL_10;
|
|
break;
|
|
case 100:
|
|
pll = AR933X_PLL_VAL_100;
|
|
break;
|
|
case 1000:
|
|
pll = AR933X_PLL_VAL_1000;
|
|
break;
|
|
default:
|
|
printf("%s%d: invalid speed %d\n", __func__, mac, speed);
|
|
pll = 0;
|
|
}
|
|
return (pll);
|
|
}
|
|
|
|
static void
|
|
ar933x_chip_init_usb_peripheral(void)
|
|
{
|
|
ar71xx_device_stop(AR933X_RESET_USBSUS_OVERRIDE);
|
|
DELAY(100);
|
|
|
|
ar71xx_device_start(AR933X_RESET_USB_HOST);
|
|
DELAY(100);
|
|
|
|
ar71xx_device_start(AR933X_RESET_USB_PHY);
|
|
DELAY(100);
|
|
}
|
|
|
|
static void
|
|
ar933x_configure_gmac(uint32_t gmac_cfg)
|
|
{
|
|
uint32_t reg;
|
|
|
|
reg = ATH_READ_REG(AR933X_GMAC_REG_ETH_CFG);
|
|
|
|
/*
|
|
* The relevant bits here include:
|
|
*
|
|
* + AR933X_ETH_CFG_SW_PHY_SWAP
|
|
* + AR933X_ETH_CFG_SW_PHY_ADDR_SWAP
|
|
*
|
|
* There are other things; look at what openwrt exposes so
|
|
* it can be correctly exposed.
|
|
*
|
|
* TODO: what about ethernet switch support? How's that work?
|
|
*/
|
|
if (bootverbose)
|
|
printf("%s: GMAC config was 0x%08x\n", __func__, reg);
|
|
reg &= ~(AR933X_ETH_CFG_SW_PHY_SWAP | AR933X_ETH_CFG_SW_PHY_ADDR_SWAP);
|
|
reg |= gmac_cfg;
|
|
if (bootverbose)
|
|
printf("%s: GMAC setting is 0x%08x; register is now 0x%08x\n",
|
|
__func__,
|
|
gmac_cfg,
|
|
reg);
|
|
ATH_WRITE_REG(AR933X_GMAC_REG_ETH_CFG, reg);
|
|
}
|
|
|
|
static void
|
|
ar933x_chip_init_gmac(void)
|
|
{
|
|
int val;
|
|
uint32_t gmac_cfg = 0;
|
|
|
|
/*
|
|
* These two bits need a bit better explanation.
|
|
*
|
|
* The default configuration in the hardware is to map both
|
|
* ports to the internal switch.
|
|
*
|
|
* Here, GE0 == arge0, GE1 == arge1.
|
|
*
|
|
* The internal switch has:
|
|
* + 5 MAC ports, MAC0->MAC4.
|
|
* + 5 PHY ports, PHY0->PHY4,
|
|
* + MAC0 connects to GE1;
|
|
* + GE0 connects to PHY4;
|
|
* + The other mappings are MAC1->PHY0, MAC2->PHY1 .. MAC4->PHY3.
|
|
*
|
|
* The GE1 port is linked in via 1000MBit/full, supplying what is
|
|
* normally the 'WAN' switch ports.
|
|
*
|
|
* The switch is connected the MDIO bus on GE1. It looks like
|
|
* a normal AR7240 on-board switch.
|
|
*
|
|
* The GE0 port is connected via MII to PHY4, and can operate in
|
|
* 10/100mbit, full/half duplex. Ie, you can speak to PHY4 on
|
|
* the MDIO bus and everything will simply 'work'.
|
|
*
|
|
* So far so good. This looks just like an AR7240 SoC.
|
|
*
|
|
* However, some configurations will just expose one or two
|
|
* physical ports. In this case, some configuration bits can
|
|
* be set to tweak this.
|
|
*
|
|
* + CFG_SW_PHY_ADDR_SWAP swaps PHY port 0 with PHY port 4.
|
|
* Ie, GE0's PHY shows up as PHY 0. So if there's only
|
|
* one physical port, there's no need to involve the
|
|
* switch framework - it can just show up as a default,
|
|
* normal single PHY.
|
|
*
|
|
* + CFG_SW_PHY_SWAP swaps the internal switch connection
|
|
* between PHY0 and PHY4. Ie, PHY4 connects to MAc1,
|
|
* PHY0 connects to GE0.
|
|
*/
|
|
if ((resource_int_value("ar933x_gmac", 0, "override_phy", &val) == 0)
|
|
&& (val == 0))
|
|
return;
|
|
if ((resource_int_value("ar933x_gmac", 0, "swap_phy", &val) == 0)
|
|
&& (val == 1))
|
|
gmac_cfg |= AR933X_ETH_CFG_SW_PHY_SWAP;
|
|
if ((resource_int_value("ar933x_gmac", 0, "swap_phy_addr", &val) == 0)
|
|
&& (val == 1))
|
|
gmac_cfg |= AR933X_ETH_CFG_SW_PHY_ADDR_SWAP;
|
|
ar933x_configure_gmac(gmac_cfg);
|
|
}
|
|
|
|
struct ar71xx_cpu_def ar933x_chip_def = {
|
|
&ar933x_chip_detect_mem_size,
|
|
&ar933x_chip_detect_sys_frequency,
|
|
&ar933x_chip_device_stop,
|
|
&ar933x_chip_device_start,
|
|
&ar933x_chip_device_stopped,
|
|
&ar933x_chip_set_pll_ge,
|
|
&ar933x_chip_set_mii_speed,
|
|
&ar71xx_chip_set_mii_if,
|
|
&ar933x_chip_get_eth_pll,
|
|
&ar933x_chip_ddr_flush,
|
|
&ar933x_chip_init_usb_peripheral,
|
|
NULL,
|
|
NULL,
|
|
&ar933x_chip_init_gmac,
|
|
};
|