ff60b600fd
special eject command to reappear as modem. It also requires DIR_IN flag in the command message, so we supply some dummy data along with the command. Feedback from X080S owners appreciated. I have not a pure Alcatel/TCTMobile device, but another one under "Svyaznoy" (Связной) brand, and I didn't yet managed to get it working. It is successfully recognized, it responds to AT commands, but it shuts up right after successfull CONNECT response. Reviewed by: hps
638 lines
16 KiB
C
638 lines
16 KiB
C
/* $FreeBSD$ */
|
|
/*-
|
|
* Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* The following file contains code that will detect USB autoinstall
|
|
* disks.
|
|
*
|
|
* TODO: Potentially we could add code to automatically detect USB
|
|
* mass storage quirks for not supported SCSI commands!
|
|
*/
|
|
|
|
#include <sys/stdint.h>
|
|
#include <sys/stddef.h>
|
|
#include <sys/param.h>
|
|
#include <sys/queue.h>
|
|
#include <sys/types.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/linker_set.h>
|
|
#include <sys/module.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/condvar.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/sx.h>
|
|
#include <sys/unistd.h>
|
|
#include <sys/callout.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/priv.h>
|
|
|
|
#include <dev/usb/usb.h>
|
|
#include <dev/usb/usbdi.h>
|
|
#include <dev/usb/usbdi_util.h>
|
|
|
|
#define USB_DEBUG_VAR usb_debug
|
|
|
|
#include <dev/usb/usb_busdma.h>
|
|
#include <dev/usb/usb_process.h>
|
|
#include <dev/usb/usb_transfer.h>
|
|
#include <dev/usb/usb_msctest.h>
|
|
#include <dev/usb/usb_debug.h>
|
|
#include <dev/usb/usb_busdma.h>
|
|
#include <dev/usb/usb_device.h>
|
|
#include <dev/usb/usb_request.h>
|
|
#include <dev/usb/usb_util.h>
|
|
#include <dev/usb/quirk/usb_quirk.h>
|
|
|
|
enum {
|
|
ST_COMMAND,
|
|
ST_DATA_RD,
|
|
ST_DATA_RD_CS,
|
|
ST_DATA_WR,
|
|
ST_DATA_WR_CS,
|
|
ST_STATUS,
|
|
ST_MAX,
|
|
};
|
|
|
|
enum {
|
|
DIR_IN,
|
|
DIR_OUT,
|
|
DIR_NONE,
|
|
};
|
|
|
|
#define SCSI_INQ_LEN 0x24
|
|
static uint8_t scsi_test_unit_ready[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
|
|
static uint8_t scsi_inquiry[] = { 0x12, 0x00, 0x00, 0x00, SCSI_INQ_LEN, 0x00 };
|
|
static uint8_t scsi_rezero_init[] = { 0x01, 0x00, 0x00, 0x00, 0x00, 0x00 };
|
|
static uint8_t scsi_start_stop_unit[] = { 0x1b, 0x00, 0x00, 0x00, 0x02, 0x00 };
|
|
static uint8_t scsi_ztestor_eject[] = { 0x85, 0x01, 0x01, 0x01, 0x18, 0x01,
|
|
0x01, 0x01, 0x01, 0x01, 0x00, 0x00 };
|
|
static uint8_t scsi_cmotech_eject[] = { 0xff, 0x52, 0x44, 0x45, 0x56, 0x43,
|
|
0x48, 0x47 };
|
|
static uint8_t scsi_huawei_eject[] = { 0x11, 0x06, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00 };
|
|
static uint8_t scsi_tct_eject[] = { 0x06, 0xf5, 0x04, 0x02, 0x52, 0x70 };
|
|
static uint8_t scsi_tct_dummy[4];
|
|
|
|
#define BULK_SIZE 64 /* dummy */
|
|
#define ERR_CSW_FAILED -1
|
|
|
|
/* Command Block Wrapper */
|
|
struct bbb_cbw {
|
|
uDWord dCBWSignature;
|
|
#define CBWSIGNATURE 0x43425355
|
|
uDWord dCBWTag;
|
|
uDWord dCBWDataTransferLength;
|
|
uByte bCBWFlags;
|
|
#define CBWFLAGS_OUT 0x00
|
|
#define CBWFLAGS_IN 0x80
|
|
uByte bCBWLUN;
|
|
uByte bCDBLength;
|
|
#define CBWCDBLENGTH 16
|
|
uByte CBWCDB[CBWCDBLENGTH];
|
|
} __packed;
|
|
|
|
/* Command Status Wrapper */
|
|
struct bbb_csw {
|
|
uDWord dCSWSignature;
|
|
#define CSWSIGNATURE 0x53425355
|
|
uDWord dCSWTag;
|
|
uDWord dCSWDataResidue;
|
|
uByte bCSWStatus;
|
|
#define CSWSTATUS_GOOD 0x0
|
|
#define CSWSTATUS_FAILED 0x1
|
|
#define CSWSTATUS_PHASE 0x2
|
|
} __packed;
|
|
|
|
struct bbb_transfer {
|
|
struct mtx mtx;
|
|
struct cv cv;
|
|
struct bbb_cbw cbw;
|
|
struct bbb_csw csw;
|
|
|
|
struct usb_xfer *xfer[ST_MAX];
|
|
|
|
uint8_t *data_ptr;
|
|
|
|
usb_size_t data_len; /* bytes */
|
|
usb_size_t data_rem; /* bytes */
|
|
usb_timeout_t data_timeout; /* ms */
|
|
usb_frlength_t actlen; /* bytes */
|
|
|
|
uint8_t cmd_len; /* bytes */
|
|
uint8_t dir;
|
|
uint8_t lun;
|
|
uint8_t state;
|
|
uint8_t status_try;
|
|
int error;
|
|
|
|
uint8_t buffer[256];
|
|
};
|
|
|
|
static usb_callback_t bbb_command_callback;
|
|
static usb_callback_t bbb_data_read_callback;
|
|
static usb_callback_t bbb_data_rd_cs_callback;
|
|
static usb_callback_t bbb_data_write_callback;
|
|
static usb_callback_t bbb_data_wr_cs_callback;
|
|
static usb_callback_t bbb_status_callback;
|
|
|
|
static void bbb_done(struct bbb_transfer *, int);
|
|
static void bbb_transfer_start(struct bbb_transfer *, uint8_t);
|
|
static void bbb_data_clear_stall_callback(struct usb_xfer *, uint8_t,
|
|
uint8_t);
|
|
static uint8_t bbb_command_start(struct bbb_transfer *, uint8_t, uint8_t,
|
|
void *, size_t, void *, size_t, usb_timeout_t);
|
|
static struct bbb_transfer *bbb_attach(struct usb_device *, uint8_t);
|
|
static void bbb_detach(struct bbb_transfer *);
|
|
|
|
static const struct usb_config bbb_config[ST_MAX] = {
|
|
|
|
[ST_COMMAND] = {
|
|
.type = UE_BULK,
|
|
.endpoint = UE_ADDR_ANY,
|
|
.direction = UE_DIR_OUT,
|
|
.bufsize = sizeof(struct bbb_cbw),
|
|
.callback = &bbb_command_callback,
|
|
.timeout = 4 * USB_MS_HZ, /* 4 seconds */
|
|
},
|
|
|
|
[ST_DATA_RD] = {
|
|
.type = UE_BULK,
|
|
.endpoint = UE_ADDR_ANY,
|
|
.direction = UE_DIR_IN,
|
|
.bufsize = BULK_SIZE,
|
|
.flags = {.proxy_buffer = 1,.short_xfer_ok = 1,},
|
|
.callback = &bbb_data_read_callback,
|
|
.timeout = 4 * USB_MS_HZ, /* 4 seconds */
|
|
},
|
|
|
|
[ST_DATA_RD_CS] = {
|
|
.type = UE_CONTROL,
|
|
.endpoint = 0x00, /* Control pipe */
|
|
.direction = UE_DIR_ANY,
|
|
.bufsize = sizeof(struct usb_device_request),
|
|
.callback = &bbb_data_rd_cs_callback,
|
|
.timeout = 1 * USB_MS_HZ, /* 1 second */
|
|
},
|
|
|
|
[ST_DATA_WR] = {
|
|
.type = UE_BULK,
|
|
.endpoint = UE_ADDR_ANY,
|
|
.direction = UE_DIR_OUT,
|
|
.bufsize = BULK_SIZE,
|
|
.flags = {.proxy_buffer = 1,},
|
|
.callback = &bbb_data_write_callback,
|
|
.timeout = 4 * USB_MS_HZ, /* 4 seconds */
|
|
},
|
|
|
|
[ST_DATA_WR_CS] = {
|
|
.type = UE_CONTROL,
|
|
.endpoint = 0x00, /* Control pipe */
|
|
.direction = UE_DIR_ANY,
|
|
.bufsize = sizeof(struct usb_device_request),
|
|
.callback = &bbb_data_wr_cs_callback,
|
|
.timeout = 1 * USB_MS_HZ, /* 1 second */
|
|
},
|
|
|
|
[ST_STATUS] = {
|
|
.type = UE_BULK,
|
|
.endpoint = UE_ADDR_ANY,
|
|
.direction = UE_DIR_IN,
|
|
.bufsize = sizeof(struct bbb_csw),
|
|
.flags = {.short_xfer_ok = 1,},
|
|
.callback = &bbb_status_callback,
|
|
.timeout = 1 * USB_MS_HZ, /* 1 second */
|
|
},
|
|
};
|
|
|
|
static void
|
|
bbb_done(struct bbb_transfer *sc, int error)
|
|
{
|
|
|
|
sc->error = error;
|
|
sc->state = ST_COMMAND;
|
|
sc->status_try = 1;
|
|
cv_signal(&sc->cv);
|
|
}
|
|
|
|
static void
|
|
bbb_transfer_start(struct bbb_transfer *sc, uint8_t xfer_index)
|
|
{
|
|
sc->state = xfer_index;
|
|
usbd_transfer_start(sc->xfer[xfer_index]);
|
|
}
|
|
|
|
static void
|
|
bbb_data_clear_stall_callback(struct usb_xfer *xfer,
|
|
uint8_t next_xfer, uint8_t stall_xfer)
|
|
{
|
|
struct bbb_transfer *sc = usbd_xfer_softc(xfer);
|
|
|
|
if (usbd_clear_stall_callback(xfer, sc->xfer[stall_xfer])) {
|
|
switch (USB_GET_STATE(xfer)) {
|
|
case USB_ST_SETUP:
|
|
case USB_ST_TRANSFERRED:
|
|
bbb_transfer_start(sc, next_xfer);
|
|
break;
|
|
default:
|
|
bbb_done(sc, USB_ERR_STALLED);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
bbb_command_callback(struct usb_xfer *xfer, usb_error_t error)
|
|
{
|
|
struct bbb_transfer *sc = usbd_xfer_softc(xfer);
|
|
uint32_t tag;
|
|
|
|
switch (USB_GET_STATE(xfer)) {
|
|
case USB_ST_TRANSFERRED:
|
|
bbb_transfer_start
|
|
(sc, ((sc->dir == DIR_IN) ? ST_DATA_RD :
|
|
(sc->dir == DIR_OUT) ? ST_DATA_WR :
|
|
ST_STATUS));
|
|
break;
|
|
|
|
case USB_ST_SETUP:
|
|
sc->status_try = 0;
|
|
tag = UGETDW(sc->cbw.dCBWTag) + 1;
|
|
USETDW(sc->cbw.dCBWSignature, CBWSIGNATURE);
|
|
USETDW(sc->cbw.dCBWTag, tag);
|
|
USETDW(sc->cbw.dCBWDataTransferLength, (uint32_t)sc->data_len);
|
|
sc->cbw.bCBWFlags = ((sc->dir == DIR_IN) ? CBWFLAGS_IN : CBWFLAGS_OUT);
|
|
sc->cbw.bCBWLUN = sc->lun;
|
|
sc->cbw.bCDBLength = sc->cmd_len;
|
|
if (sc->cbw.bCDBLength > sizeof(sc->cbw.CBWCDB)) {
|
|
sc->cbw.bCDBLength = sizeof(sc->cbw.CBWCDB);
|
|
DPRINTFN(0, "Truncating long command\n");
|
|
}
|
|
usbd_xfer_set_frame_data(xfer, 0, &sc->cbw, sizeof(sc->cbw));
|
|
usbd_transfer_submit(xfer);
|
|
break;
|
|
|
|
default: /* Error */
|
|
bbb_done(sc, error);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
bbb_data_read_callback(struct usb_xfer *xfer, usb_error_t error)
|
|
{
|
|
struct bbb_transfer *sc = usbd_xfer_softc(xfer);
|
|
usb_frlength_t max_bulk = usbd_xfer_max_len(xfer);
|
|
int actlen, sumlen;
|
|
|
|
usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL);
|
|
|
|
switch (USB_GET_STATE(xfer)) {
|
|
case USB_ST_TRANSFERRED:
|
|
sc->data_rem -= actlen;
|
|
sc->data_ptr += actlen;
|
|
sc->actlen += actlen;
|
|
|
|
if (actlen < sumlen) {
|
|
/* short transfer */
|
|
sc->data_rem = 0;
|
|
}
|
|
case USB_ST_SETUP:
|
|
DPRINTF("max_bulk=%d, data_rem=%d\n",
|
|
max_bulk, sc->data_rem);
|
|
|
|
if (sc->data_rem == 0) {
|
|
bbb_transfer_start(sc, ST_STATUS);
|
|
break;
|
|
}
|
|
if (max_bulk > sc->data_rem) {
|
|
max_bulk = sc->data_rem;
|
|
}
|
|
usbd_xfer_set_timeout(xfer, sc->data_timeout);
|
|
usbd_xfer_set_frame_data(xfer, 0, sc->data_ptr, max_bulk);
|
|
usbd_transfer_submit(xfer);
|
|
break;
|
|
|
|
default: /* Error */
|
|
if (error == USB_ERR_CANCELLED) {
|
|
bbb_done(sc, error);
|
|
} else {
|
|
bbb_transfer_start(sc, ST_DATA_RD_CS);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
bbb_data_rd_cs_callback(struct usb_xfer *xfer, usb_error_t error)
|
|
{
|
|
bbb_data_clear_stall_callback(xfer, ST_STATUS,
|
|
ST_DATA_RD);
|
|
}
|
|
|
|
static void
|
|
bbb_data_write_callback(struct usb_xfer *xfer, usb_error_t error)
|
|
{
|
|
struct bbb_transfer *sc = usbd_xfer_softc(xfer);
|
|
usb_frlength_t max_bulk = usbd_xfer_max_len(xfer);
|
|
int actlen, sumlen;
|
|
|
|
usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL);
|
|
|
|
switch (USB_GET_STATE(xfer)) {
|
|
case USB_ST_TRANSFERRED:
|
|
sc->data_rem -= actlen;
|
|
sc->data_ptr += actlen;
|
|
sc->actlen += actlen;
|
|
|
|
if (actlen < sumlen) {
|
|
/* short transfer */
|
|
sc->data_rem = 0;
|
|
}
|
|
case USB_ST_SETUP:
|
|
DPRINTF("max_bulk=%d, data_rem=%d\n",
|
|
max_bulk, sc->data_rem);
|
|
|
|
if (sc->data_rem == 0) {
|
|
bbb_transfer_start(sc, ST_STATUS);
|
|
return;
|
|
}
|
|
if (max_bulk > sc->data_rem) {
|
|
max_bulk = sc->data_rem;
|
|
}
|
|
usbd_xfer_set_timeout(xfer, sc->data_timeout);
|
|
usbd_xfer_set_frame_data(xfer, 0, sc->data_ptr, max_bulk);
|
|
usbd_transfer_submit(xfer);
|
|
return;
|
|
|
|
default: /* Error */
|
|
if (error == USB_ERR_CANCELLED) {
|
|
bbb_done(sc, error);
|
|
} else {
|
|
bbb_transfer_start(sc, ST_DATA_WR_CS);
|
|
}
|
|
return;
|
|
|
|
}
|
|
}
|
|
|
|
static void
|
|
bbb_data_wr_cs_callback(struct usb_xfer *xfer, usb_error_t error)
|
|
{
|
|
bbb_data_clear_stall_callback(xfer, ST_STATUS,
|
|
ST_DATA_WR);
|
|
}
|
|
|
|
static void
|
|
bbb_status_callback(struct usb_xfer *xfer, usb_error_t error)
|
|
{
|
|
struct bbb_transfer *sc = usbd_xfer_softc(xfer);
|
|
int actlen, sumlen;
|
|
|
|
usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL);
|
|
|
|
switch (USB_GET_STATE(xfer)) {
|
|
case USB_ST_TRANSFERRED:
|
|
|
|
/* very simple status check */
|
|
|
|
if (actlen < sizeof(sc->csw)) {
|
|
bbb_done(sc, USB_ERR_SHORT_XFER);
|
|
} else if (sc->csw.bCSWStatus == CSWSTATUS_GOOD) {
|
|
bbb_done(sc, 0); /* success */
|
|
} else {
|
|
bbb_done(sc, ERR_CSW_FAILED); /* error */
|
|
}
|
|
break;
|
|
|
|
case USB_ST_SETUP:
|
|
usbd_xfer_set_frame_data(xfer, 0, &sc->csw, sizeof(sc->csw));
|
|
usbd_transfer_submit(xfer);
|
|
break;
|
|
|
|
default:
|
|
DPRINTF("Failed to read CSW: %s, try %d\n",
|
|
usbd_errstr(error), sc->status_try);
|
|
|
|
if (error == USB_ERR_CANCELLED || sc->status_try) {
|
|
bbb_done(sc, error);
|
|
} else {
|
|
sc->status_try = 1;
|
|
bbb_transfer_start(sc, ST_DATA_RD_CS);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*------------------------------------------------------------------------*
|
|
* bbb_command_start - execute a SCSI command synchronously
|
|
*
|
|
* Return values
|
|
* 0: Success
|
|
* Else: Failure
|
|
*------------------------------------------------------------------------*/
|
|
static uint8_t
|
|
bbb_command_start(struct bbb_transfer *sc, uint8_t dir, uint8_t lun,
|
|
void *data_ptr, size_t data_len, void *cmd_ptr, size_t cmd_len,
|
|
usb_timeout_t data_timeout)
|
|
{
|
|
sc->lun = lun;
|
|
sc->dir = data_len ? dir : DIR_NONE;
|
|
sc->data_ptr = data_ptr;
|
|
sc->data_len = data_len;
|
|
sc->data_rem = data_len;
|
|
sc->data_timeout = (data_timeout + USB_MS_HZ);
|
|
sc->actlen = 0;
|
|
sc->data_ptr = data_ptr;
|
|
sc->cmd_len = cmd_len;
|
|
bzero(&sc->cbw.CBWCDB, sizeof(sc->cbw.CBWCDB));
|
|
bcopy(cmd_ptr, &sc->cbw.CBWCDB, cmd_len);
|
|
DPRINTFN(1, "SCSI cmd = %*D\n", (int)cmd_len, &sc->cbw.CBWCDB, ":");
|
|
|
|
mtx_lock(&sc->mtx);
|
|
usbd_transfer_start(sc->xfer[sc->state]);
|
|
|
|
while (usbd_transfer_pending(sc->xfer[sc->state])) {
|
|
cv_wait(&sc->cv, &sc->mtx);
|
|
}
|
|
mtx_unlock(&sc->mtx);
|
|
return (sc->error);
|
|
}
|
|
|
|
static struct bbb_transfer *
|
|
bbb_attach(struct usb_device *udev, uint8_t iface_index)
|
|
{
|
|
struct usb_interface *iface;
|
|
struct usb_interface_descriptor *id;
|
|
struct bbb_transfer *sc;
|
|
usb_error_t err;
|
|
|
|
iface = usbd_get_iface(udev, iface_index);
|
|
if (iface == NULL)
|
|
return (NULL);
|
|
|
|
id = iface->idesc;
|
|
if (id == NULL || id->bInterfaceClass != UICLASS_MASS)
|
|
return (NULL);
|
|
|
|
switch (id->bInterfaceSubClass) {
|
|
case UISUBCLASS_SCSI:
|
|
case UISUBCLASS_UFI:
|
|
case UISUBCLASS_SFF8020I:
|
|
case UISUBCLASS_SFF8070I:
|
|
break;
|
|
default:
|
|
return (NULL);
|
|
}
|
|
|
|
switch (id->bInterfaceProtocol) {
|
|
case UIPROTO_MASS_BBB_OLD:
|
|
case UIPROTO_MASS_BBB:
|
|
break;
|
|
default:
|
|
return (NULL);
|
|
}
|
|
|
|
sc = malloc(sizeof(*sc), M_USB, M_WAITOK | M_ZERO);
|
|
mtx_init(&sc->mtx, "USB autoinstall", NULL, MTX_DEF);
|
|
cv_init(&sc->cv, "WBBB");
|
|
|
|
err = usbd_transfer_setup(udev, &iface_index, sc->xfer, bbb_config,
|
|
ST_MAX, sc, &sc->mtx);
|
|
if (err) {
|
|
bbb_detach(sc);
|
|
return (NULL);
|
|
}
|
|
return (sc);
|
|
}
|
|
|
|
static void
|
|
bbb_detach(struct bbb_transfer *sc)
|
|
{
|
|
usbd_transfer_unsetup(sc->xfer, ST_MAX);
|
|
mtx_destroy(&sc->mtx);
|
|
cv_destroy(&sc->cv);
|
|
free(sc, M_USB);
|
|
}
|
|
|
|
/*------------------------------------------------------------------------*
|
|
* usb_iface_is_cdrom
|
|
*
|
|
* Return values:
|
|
* 1: This interface is an auto install disk (CD-ROM)
|
|
* 0: Not an auto install disk.
|
|
*------------------------------------------------------------------------*/
|
|
int
|
|
usb_iface_is_cdrom(struct usb_device *udev, uint8_t iface_index)
|
|
{
|
|
struct bbb_transfer *sc;
|
|
usb_error_t err;
|
|
uint8_t timeout, is_cdrom;
|
|
uint8_t sid_type;
|
|
|
|
sc = bbb_attach(udev, iface_index);
|
|
if (sc == NULL)
|
|
return (0);
|
|
|
|
is_cdrom = 0;
|
|
timeout = 4; /* tries */
|
|
while (--timeout) {
|
|
err = bbb_command_start(sc, DIR_IN, 0, sc->buffer,
|
|
SCSI_INQ_LEN, &scsi_inquiry, sizeof(scsi_inquiry),
|
|
USB_MS_HZ);
|
|
|
|
if (err == 0 && sc->actlen > 0) {
|
|
sid_type = sc->buffer[0] & 0x1F;
|
|
if (sid_type == 0x05)
|
|
is_cdrom = 1;
|
|
break;
|
|
} else if (err != ERR_CSW_FAILED)
|
|
break; /* non retryable error */
|
|
usb_pause_mtx(NULL, hz);
|
|
}
|
|
bbb_detach(sc);
|
|
return (is_cdrom);
|
|
}
|
|
|
|
usb_error_t
|
|
usb_msc_eject(struct usb_device *udev, uint8_t iface_index, int method)
|
|
{
|
|
struct bbb_transfer *sc;
|
|
usb_error_t err;
|
|
|
|
sc = bbb_attach(udev, iface_index);
|
|
if (sc == NULL)
|
|
return (USB_ERR_INVAL);
|
|
|
|
err = 0;
|
|
switch (method) {
|
|
case MSC_EJECT_STOPUNIT:
|
|
err = bbb_command_start(sc, DIR_IN, 0, NULL, 0,
|
|
&scsi_test_unit_ready, sizeof(scsi_test_unit_ready),
|
|
USB_MS_HZ);
|
|
DPRINTF("Test unit ready status: %s\n", usbd_errstr(err));
|
|
err = bbb_command_start(sc, DIR_IN, 0, NULL, 0,
|
|
&scsi_start_stop_unit, sizeof(scsi_start_stop_unit),
|
|
USB_MS_HZ);
|
|
break;
|
|
case MSC_EJECT_REZERO:
|
|
err = bbb_command_start(sc, DIR_IN, 0, NULL, 0,
|
|
&scsi_rezero_init, sizeof(scsi_rezero_init),
|
|
USB_MS_HZ);
|
|
break;
|
|
case MSC_EJECT_ZTESTOR:
|
|
err = bbb_command_start(sc, DIR_IN, 0, NULL, 0,
|
|
&scsi_ztestor_eject, sizeof(scsi_ztestor_eject),
|
|
USB_MS_HZ);
|
|
break;
|
|
case MSC_EJECT_CMOTECH:
|
|
err = bbb_command_start(sc, DIR_IN, 0, NULL, 0,
|
|
&scsi_cmotech_eject, sizeof(scsi_cmotech_eject),
|
|
USB_MS_HZ);
|
|
break;
|
|
case MSC_EJECT_HUAWEI:
|
|
err = bbb_command_start(sc, DIR_IN, 0, NULL, 0,
|
|
&scsi_huawei_eject, sizeof(scsi_huawei_eject),
|
|
USB_MS_HZ);
|
|
break;
|
|
case MSC_EJECT_TCT:
|
|
err = bbb_command_start(sc, DIR_IN, 0, &scsi_tct_dummy,
|
|
sizeof(scsi_tct_dummy), &scsi_tct_eject,
|
|
sizeof(scsi_tct_eject), USB_MS_HZ);
|
|
break;
|
|
default:
|
|
printf("usb_msc_eject: unknown eject method (%d)\n", method);
|
|
break;
|
|
}
|
|
DPRINTF("Eject CD command status: %s\n", usbd_errstr(err));
|
|
|
|
bbb_detach(sc);
|
|
return (0);
|
|
}
|