a0c34c5a23
chances of allocations succeeding on systems with small amounts of RAM. Pointed out by: bde
1453 lines
32 KiB
C
1453 lines
32 KiB
C
/*
|
|
* Copyright (c) 1997, 1998, 1999
|
|
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* SiS 900/SiS 7016 fast ethernet PCI NIC driver. Datasheets are
|
|
* available from http://www.sis.com.tw.
|
|
*
|
|
* Written by Bill Paul <wpaul@ee.columbia.edu>
|
|
* Electrical Engineering Department
|
|
* Columbia University, New York City
|
|
*/
|
|
|
|
/*
|
|
* The SiS 900 is a fairly simple chip. It uses bus master DMA with
|
|
* simple TX and RX descriptors of 3 longwords in size. The receiver
|
|
* has a single perfect filter entry for the station address and a
|
|
* 128-bit multicast hash table. The SiS 900 has a built-in MII-based
|
|
* transceiver while the 7016 requires an external transceiver chip.
|
|
* Both chips offer the standard bit-bang MII interface as well as
|
|
* an enchanced PHY interface which simplifies accessing MII registers.
|
|
*
|
|
* The only downside to this chipset is that RX descriptors must be
|
|
* longword aligned.
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <net/bpf.h>
|
|
|
|
#include <vm/vm.h> /* for vtophys */
|
|
#include <vm/pmap.h> /* for vtophys */
|
|
#include <machine/clock.h> /* for DELAY */
|
|
#include <machine/bus_pio.h>
|
|
#include <machine/bus_memio.h>
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
|
|
#include <pci/pcireg.h>
|
|
#include <pci/pcivar.h>
|
|
|
|
#define SIS_USEIOSPACE
|
|
|
|
#include <pci/if_sisreg.h>
|
|
|
|
/* "controller miibus0" required. See GENERIC if you get errors here. */
|
|
#include "miibus_if.h"
|
|
|
|
#ifndef lint
|
|
static const char rcsid[] =
|
|
"$FreeBSD$";
|
|
#endif
|
|
|
|
/*
|
|
* Various supported device vendors/types and their names.
|
|
*/
|
|
static struct sis_type sis_devs[] = {
|
|
{ SIS_VENDORID, SIS_DEVICEID_900, "SiS 900 10/100BaseTX" },
|
|
{ SIS_VENDORID, SIS_DEVICEID_7016, "SiS 7016 10/100BaseTX" },
|
|
{ 0, 0, NULL }
|
|
};
|
|
|
|
static int sis_probe __P((device_t));
|
|
static int sis_attach __P((device_t));
|
|
static int sis_detach __P((device_t));
|
|
|
|
static int sis_newbuf __P((struct sis_softc *,
|
|
struct sis_desc *,
|
|
struct mbuf *));
|
|
static int sis_encap __P((struct sis_softc *,
|
|
struct mbuf *, u_int32_t *));
|
|
static void sis_rxeof __P((struct sis_softc *));
|
|
static void sis_rxeoc __P((struct sis_softc *));
|
|
static void sis_txeof __P((struct sis_softc *));
|
|
static void sis_intr __P((void *));
|
|
static void sis_tick __P((void *));
|
|
static void sis_start __P((struct ifnet *));
|
|
static int sis_ioctl __P((struct ifnet *, u_long, caddr_t));
|
|
static void sis_init __P((void *));
|
|
static void sis_stop __P((struct sis_softc *));
|
|
static void sis_watchdog __P((struct ifnet *));
|
|
static void sis_shutdown __P((device_t));
|
|
static int sis_ifmedia_upd __P((struct ifnet *));
|
|
static void sis_ifmedia_sts __P((struct ifnet *, struct ifmediareq *));
|
|
|
|
static void sis_delay __P((struct sis_softc *));
|
|
static void sis_eeprom_idle __P((struct sis_softc *));
|
|
static void sis_eeprom_putbyte __P((struct sis_softc *, int));
|
|
static void sis_eeprom_getword __P((struct sis_softc *, int, u_int16_t *));
|
|
static void sis_read_eeprom __P((struct sis_softc *, caddr_t, int,
|
|
int, int));
|
|
static int sis_miibus_readreg __P((device_t, int, int));
|
|
static int sis_miibus_writereg __P((device_t, int, int, int));
|
|
static void sis_miibus_statchg __P((device_t));
|
|
|
|
static void sis_setmulti __P((struct sis_softc *));
|
|
static u_int32_t sis_calchash __P((caddr_t));
|
|
static void sis_reset __P((struct sis_softc *));
|
|
static int sis_list_rx_init __P((struct sis_softc *));
|
|
static int sis_list_tx_init __P((struct sis_softc *));
|
|
|
|
#ifdef SIS_USEIOSPACE
|
|
#define SIS_RES SYS_RES_IOPORT
|
|
#define SIS_RID SIS_PCI_LOIO
|
|
#else
|
|
#define SIS_RES SYS_RES_MEMORY
|
|
#define SIS_RID SIS_PCI_LOMEM
|
|
#endif
|
|
|
|
static device_method_t sis_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, sis_probe),
|
|
DEVMETHOD(device_attach, sis_attach),
|
|
DEVMETHOD(device_detach, sis_detach),
|
|
DEVMETHOD(device_shutdown, sis_shutdown),
|
|
|
|
/* bus interface */
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
|
|
|
|
/* MII interface */
|
|
DEVMETHOD(miibus_readreg, sis_miibus_readreg),
|
|
DEVMETHOD(miibus_writereg, sis_miibus_writereg),
|
|
DEVMETHOD(miibus_statchg, sis_miibus_statchg),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t sis_driver = {
|
|
"sis",
|
|
sis_methods,
|
|
sizeof(struct sis_softc)
|
|
};
|
|
|
|
static devclass_t sis_devclass;
|
|
|
|
DRIVER_MODULE(if_sis, pci, sis_driver, sis_devclass, 0, 0);
|
|
DRIVER_MODULE(miibus, sis, miibus_driver, miibus_devclass, 0, 0);
|
|
|
|
#define SIS_SETBIT(sc, reg, x) \
|
|
CSR_WRITE_4(sc, reg, \
|
|
CSR_READ_4(sc, reg) | (x))
|
|
|
|
#define SIS_CLRBIT(sc, reg, x) \
|
|
CSR_WRITE_4(sc, reg, \
|
|
CSR_READ_4(sc, reg) & ~(x))
|
|
|
|
#define SIO_SET(x) \
|
|
CSR_WRITE_4(sc, SIS_EECTL, CSR_READ_4(sc, SIS_EECTL) | x)
|
|
|
|
#define SIO_CLR(x) \
|
|
CSR_WRITE_4(sc, SIS_EECTL, CSR_READ_4(sc, SIS_EECTL) & ~x)
|
|
|
|
static void sis_delay(sc)
|
|
struct sis_softc *sc;
|
|
{
|
|
int idx;
|
|
|
|
for (idx = (300 / 33) + 1; idx > 0; idx--)
|
|
CSR_READ_4(sc, SIS_CSR);
|
|
|
|
return;
|
|
}
|
|
|
|
static void sis_eeprom_idle(sc)
|
|
struct sis_softc *sc;
|
|
{
|
|
register int i;
|
|
|
|
SIO_SET(SIS_EECTL_CSEL);
|
|
sis_delay(sc);
|
|
SIO_SET(SIS_EECTL_CLK);
|
|
sis_delay(sc);
|
|
|
|
for (i = 0; i < 25; i++) {
|
|
SIO_CLR(SIS_EECTL_CLK);
|
|
sis_delay(sc);
|
|
SIO_SET(SIS_EECTL_CLK);
|
|
sis_delay(sc);
|
|
}
|
|
|
|
SIO_CLR(SIS_EECTL_CLK);
|
|
sis_delay(sc);
|
|
SIO_CLR(SIS_EECTL_CSEL);
|
|
sis_delay(sc);
|
|
CSR_WRITE_4(sc, SIS_EECTL, 0x00000000);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Send a read command and address to the EEPROM, check for ACK.
|
|
*/
|
|
static void sis_eeprom_putbyte(sc, addr)
|
|
struct sis_softc *sc;
|
|
int addr;
|
|
{
|
|
register int d, i;
|
|
|
|
d = addr | SIS_EECMD_READ;
|
|
|
|
/*
|
|
* Feed in each bit and stobe the clock.
|
|
*/
|
|
for (i = 0x400; i; i >>= 1) {
|
|
if (d & i) {
|
|
SIO_SET(SIS_EECTL_DIN);
|
|
} else {
|
|
SIO_CLR(SIS_EECTL_DIN);
|
|
}
|
|
sis_delay(sc);
|
|
SIO_SET(SIS_EECTL_CLK);
|
|
sis_delay(sc);
|
|
SIO_CLR(SIS_EECTL_CLK);
|
|
sis_delay(sc);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Read a word of data stored in the EEPROM at address 'addr.'
|
|
*/
|
|
static void sis_eeprom_getword(sc, addr, dest)
|
|
struct sis_softc *sc;
|
|
int addr;
|
|
u_int16_t *dest;
|
|
{
|
|
register int i;
|
|
u_int16_t word = 0;
|
|
|
|
/* Force EEPROM to idle state. */
|
|
sis_eeprom_idle(sc);
|
|
|
|
/* Enter EEPROM access mode. */
|
|
sis_delay(sc);
|
|
SIO_SET(SIS_EECTL_CSEL);
|
|
sis_delay(sc);
|
|
SIO_SET(SIS_EECTL_CLK);
|
|
sis_delay(sc);
|
|
|
|
/*
|
|
* Send address of word we want to read.
|
|
*/
|
|
sis_eeprom_putbyte(sc, addr);
|
|
|
|
/*
|
|
* Start reading bits from EEPROM.
|
|
*/
|
|
for (i = 0x8000; i; i >>= 1) {
|
|
SIO_SET(SIS_EECTL_CLK);
|
|
sis_delay(sc);
|
|
if (CSR_READ_4(sc, SIS_EECTL) & SIS_EECTL_DOUT)
|
|
word |= i;
|
|
sis_delay(sc);
|
|
SIO_CLR(SIS_EECTL_CLK);
|
|
sis_delay(sc);
|
|
}
|
|
|
|
/* Turn off EEPROM access mode. */
|
|
sis_eeprom_idle(sc);
|
|
|
|
*dest = word;
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Read a sequence of words from the EEPROM.
|
|
*/
|
|
static void sis_read_eeprom(sc, dest, off, cnt, swap)
|
|
struct sis_softc *sc;
|
|
caddr_t dest;
|
|
int off;
|
|
int cnt;
|
|
int swap;
|
|
{
|
|
int i;
|
|
u_int16_t word = 0, *ptr;
|
|
|
|
for (i = 0; i < cnt; i++) {
|
|
sis_eeprom_getword(sc, off + i, &word);
|
|
ptr = (u_int16_t *)(dest + (i * 2));
|
|
if (swap)
|
|
*ptr = ntohs(word);
|
|
else
|
|
*ptr = word;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static int sis_miibus_readreg(dev, phy, reg)
|
|
device_t dev;
|
|
int phy, reg;
|
|
{
|
|
struct sis_softc *sc;
|
|
int i, val;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if (sc->sis_type == SIS_TYPE_900 && phy != 0)
|
|
return(0);
|
|
|
|
CSR_WRITE_4(sc, SIS_PHYCTL, (phy << 11) | (reg << 6) | SIS_PHYOP_READ);
|
|
SIS_SETBIT(sc, SIS_PHYCTL, SIS_PHYCTL_ACCESS);
|
|
|
|
for (i = 0; i < SIS_TIMEOUT; i++) {
|
|
if (!(CSR_READ_4(sc, SIS_PHYCTL) & SIS_PHYCTL_ACCESS))
|
|
break;
|
|
}
|
|
|
|
if (i == SIS_TIMEOUT) {
|
|
printf("sis%d: PHY failed to come ready\n", sc->sis_unit);
|
|
return(0);
|
|
}
|
|
|
|
val = (CSR_READ_4(sc, SIS_PHYCTL) >> 16) & 0xFFFF;
|
|
|
|
if (val == 0xFFFF)
|
|
return(0);
|
|
|
|
return(val);
|
|
}
|
|
|
|
static int sis_miibus_writereg(dev, phy, reg, data)
|
|
device_t dev;
|
|
int phy, reg, data;
|
|
{
|
|
struct sis_softc *sc;
|
|
int i;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if (sc->sis_type == SIS_TYPE_900 && phy != 0)
|
|
return(0);
|
|
|
|
CSR_WRITE_4(sc, SIS_PHYCTL, (data << 16) | (phy << 11) |
|
|
(reg << 6) | SIS_PHYOP_WRITE);
|
|
SIS_SETBIT(sc, SIS_PHYCTL, SIS_PHYCTL_ACCESS);
|
|
|
|
for (i = 0; i < SIS_TIMEOUT; i++) {
|
|
if (!(CSR_READ_4(sc, SIS_PHYCTL) & SIS_PHYCTL_ACCESS))
|
|
break;
|
|
}
|
|
|
|
if (i == SIS_TIMEOUT)
|
|
printf("sis%d: PHY failed to come ready\n", sc->sis_unit);
|
|
|
|
return(0);
|
|
}
|
|
|
|
static void sis_miibus_statchg(dev)
|
|
device_t dev;
|
|
{
|
|
struct sis_softc *sc;
|
|
struct mii_data *mii;
|
|
|
|
sc = device_get_softc(dev);
|
|
mii = device_get_softc(sc->sis_miibus);
|
|
|
|
if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) {
|
|
SIS_SETBIT(sc, SIS_TX_CFG,
|
|
(SIS_TXCFG_IGN_HBEAT|SIS_TXCFG_IGN_CARR));
|
|
SIS_SETBIT(sc, SIS_RX_CFG, SIS_RXCFG_RX_TXPKTS);
|
|
} else {
|
|
SIS_CLRBIT(sc, SIS_TX_CFG,
|
|
(SIS_TXCFG_IGN_HBEAT|SIS_TXCFG_IGN_CARR));
|
|
SIS_CLRBIT(sc, SIS_RX_CFG, SIS_RXCFG_RX_TXPKTS);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static u_int32_t sis_calchash(addr)
|
|
caddr_t addr;
|
|
{
|
|
u_int32_t crc, carry;
|
|
int i, j;
|
|
u_int8_t c;
|
|
|
|
/* Compute CRC for the address value. */
|
|
crc = 0xFFFFFFFF; /* initial value */
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
c = *(addr + i);
|
|
for (j = 0; j < 8; j++) {
|
|
carry = ((crc & 0x80000000) ? 1 : 0) ^ (c & 0x01);
|
|
crc <<= 1;
|
|
c >>= 1;
|
|
if (carry)
|
|
crc = (crc ^ 0x04c11db6) | carry;
|
|
}
|
|
}
|
|
|
|
/* return the filter bit position */
|
|
return((crc >> 25) & 0x0000007F);
|
|
}
|
|
|
|
static void sis_setmulti(sc)
|
|
struct sis_softc *sc;
|
|
{
|
|
struct ifnet *ifp;
|
|
struct ifmultiaddr *ifma;
|
|
u_int32_t h = 0, i, filtsave;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
|
|
SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLMULTI);
|
|
return;
|
|
}
|
|
|
|
SIS_CLRBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLMULTI);
|
|
|
|
filtsave = CSR_READ_4(sc, SIS_RXFILT_CTL);
|
|
|
|
/* first, zot all the existing hash bits */
|
|
for (i = 0; i < 8; i++) {
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, (4 + ((i * 16) >> 4)) << 16);
|
|
CSR_WRITE_4(sc, SIS_RXFILT_DATA, 0);
|
|
}
|
|
|
|
/* now program new ones */
|
|
for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL;
|
|
ifma = ifma->ifma_link.le_next) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
h = sis_calchash(LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, (4 + (h >> 4)) << 16);
|
|
SIS_SETBIT(sc, SIS_RXFILT_DATA, (1 << (h & 0xF)));
|
|
}
|
|
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, filtsave);
|
|
|
|
return;
|
|
}
|
|
|
|
static void sis_reset(sc)
|
|
struct sis_softc *sc;
|
|
{
|
|
register int i;
|
|
|
|
SIS_SETBIT(sc, SIS_CSR, SIS_CSR_RESET);
|
|
|
|
for (i = 0; i < SIS_TIMEOUT; i++) {
|
|
if (!(CSR_READ_4(sc, SIS_CSR) & SIS_CSR_RESET))
|
|
break;
|
|
}
|
|
|
|
if (i == SIS_TIMEOUT)
|
|
printf("sis%d: reset never completed\n", sc->sis_unit);
|
|
|
|
/* Wait a little while for the chip to get its brains in order. */
|
|
DELAY(1000);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Probe for an SiS chip. Check the PCI vendor and device
|
|
* IDs against our list and return a device name if we find a match.
|
|
*/
|
|
static int sis_probe(dev)
|
|
device_t dev;
|
|
{
|
|
struct sis_type *t;
|
|
|
|
t = sis_devs;
|
|
|
|
while(t->sis_name != NULL) {
|
|
if ((pci_get_vendor(dev) == t->sis_vid) &&
|
|
(pci_get_device(dev) == t->sis_did)) {
|
|
device_set_desc(dev, t->sis_name);
|
|
return(0);
|
|
}
|
|
t++;
|
|
}
|
|
|
|
return(ENXIO);
|
|
}
|
|
|
|
/*
|
|
* Attach the interface. Allocate softc structures, do ifmedia
|
|
* setup and ethernet/BPF attach.
|
|
*/
|
|
static int sis_attach(dev)
|
|
device_t dev;
|
|
{
|
|
int s;
|
|
u_char eaddr[ETHER_ADDR_LEN];
|
|
u_int32_t command;
|
|
struct sis_softc *sc;
|
|
struct ifnet *ifp;
|
|
int unit, error = 0, rid;
|
|
|
|
s = splimp();
|
|
|
|
sc = device_get_softc(dev);
|
|
unit = device_get_unit(dev);
|
|
bzero(sc, sizeof(struct sis_softc));
|
|
|
|
if (pci_get_device(dev) == SIS_DEVICEID_900)
|
|
sc->sis_type = SIS_TYPE_900;
|
|
if (pci_get_device(dev) == SIS_DEVICEID_7016)
|
|
sc->sis_type = SIS_TYPE_7016;
|
|
|
|
/*
|
|
* Handle power management nonsense.
|
|
*/
|
|
|
|
command = pci_read_config(dev, SIS_PCI_CAPID, 4) & 0x000000FF;
|
|
if (command == 0x01) {
|
|
|
|
command = pci_read_config(dev, SIS_PCI_PWRMGMTCTRL, 4);
|
|
if (command & SIS_PSTATE_MASK) {
|
|
u_int32_t iobase, membase, irq;
|
|
|
|
/* Save important PCI config data. */
|
|
iobase = pci_read_config(dev, SIS_PCI_LOIO, 4);
|
|
membase = pci_read_config(dev, SIS_PCI_LOMEM, 4);
|
|
irq = pci_read_config(dev, SIS_PCI_INTLINE, 4);
|
|
|
|
/* Reset the power state. */
|
|
printf("sis%d: chip is in D%d power mode "
|
|
"-- setting to D0\n", unit, command & SIS_PSTATE_MASK);
|
|
command &= 0xFFFFFFFC;
|
|
pci_write_config(dev, SIS_PCI_PWRMGMTCTRL, command, 4);
|
|
|
|
/* Restore PCI config data. */
|
|
pci_write_config(dev, SIS_PCI_LOIO, iobase, 4);
|
|
pci_write_config(dev, SIS_PCI_LOMEM, membase, 4);
|
|
pci_write_config(dev, SIS_PCI_INTLINE, irq, 4);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Map control/status registers.
|
|
*/
|
|
command = pci_read_config(dev, PCI_COMMAND_STATUS_REG, 4);
|
|
command |= (PCIM_CMD_PORTEN|PCIM_CMD_MEMEN|PCIM_CMD_BUSMASTEREN);
|
|
pci_write_config(dev, PCI_COMMAND_STATUS_REG, command, 4);
|
|
command = pci_read_config(dev, PCI_COMMAND_STATUS_REG, 4);
|
|
|
|
#ifdef SIS_USEIOSPACE
|
|
if (!(command & PCIM_CMD_PORTEN)) {
|
|
printf("sis%d: failed to enable I/O ports!\n", unit);
|
|
error = ENXIO;;
|
|
goto fail;
|
|
}
|
|
#else
|
|
if (!(command & PCIM_CMD_MEMEN)) {
|
|
printf("sis%d: failed to enable memory mapping!\n", unit);
|
|
error = ENXIO;;
|
|
goto fail;
|
|
}
|
|
#endif
|
|
|
|
rid = SIS_RID;
|
|
sc->sis_res = bus_alloc_resource(dev, SIS_RES, &rid,
|
|
0, ~0, 1, RF_ACTIVE);
|
|
|
|
if (sc->sis_res == NULL) {
|
|
printf("sis%d: couldn't map ports/memory\n", unit);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
sc->sis_btag = rman_get_bustag(sc->sis_res);
|
|
sc->sis_bhandle = rman_get_bushandle(sc->sis_res);
|
|
|
|
/* Allocate interrupt */
|
|
rid = 0;
|
|
sc->sis_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1,
|
|
RF_SHAREABLE | RF_ACTIVE);
|
|
|
|
if (sc->sis_irq == NULL) {
|
|
printf("sis%d: couldn't map interrupt\n", unit);
|
|
bus_release_resource(dev, SIS_RES, SIS_RID, sc->sis_res);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_setup_intr(dev, sc->sis_irq, INTR_TYPE_NET,
|
|
sis_intr, sc, &sc->sis_intrhand);
|
|
|
|
if (error) {
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sis_res);
|
|
bus_release_resource(dev, SIS_RES, SIS_RID, sc->sis_res);
|
|
printf("sis%d: couldn't set up irq\n", unit);
|
|
goto fail;
|
|
}
|
|
|
|
/* Reset the adapter. */
|
|
sis_reset(sc);
|
|
|
|
/*
|
|
* Get station address from the EEPROM.
|
|
*/
|
|
sis_read_eeprom(sc, (caddr_t)&eaddr, SIS_EE_NODEADDR, 3, 0);
|
|
|
|
/*
|
|
* A SiS chip was detected. Inform the world.
|
|
*/
|
|
printf("sis%d: Ethernet address: %6D\n", unit, eaddr, ":");
|
|
|
|
sc->sis_unit = unit;
|
|
callout_handle_init(&sc->sis_stat_ch);
|
|
bcopy(eaddr, (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
|
|
|
|
sc->sis_ldata = contigmalloc(sizeof(struct sis_list_data), M_DEVBUF,
|
|
M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0);
|
|
|
|
if (sc->sis_ldata == NULL) {
|
|
printf("sis%d: no memory for list buffers!\n", unit);
|
|
bus_teardown_intr(dev, sc->sis_irq, sc->sis_intrhand);
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sis_irq);
|
|
bus_release_resource(dev, SIS_RES, SIS_RID, sc->sis_res);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
bzero(sc->sis_ldata, sizeof(struct sis_list_data));
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
ifp->if_softc = sc;
|
|
ifp->if_unit = unit;
|
|
ifp->if_name = "sis";
|
|
ifp->if_mtu = ETHERMTU;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = sis_ioctl;
|
|
ifp->if_output = ether_output;
|
|
ifp->if_start = sis_start;
|
|
ifp->if_watchdog = sis_watchdog;
|
|
ifp->if_init = sis_init;
|
|
ifp->if_baudrate = 10000000;
|
|
ifp->if_snd.ifq_maxlen = SIS_TX_LIST_CNT - 1;
|
|
|
|
/*
|
|
* Do MII setup.
|
|
*/
|
|
if (mii_phy_probe(dev, &sc->sis_miibus,
|
|
sis_ifmedia_upd, sis_ifmedia_sts)) {
|
|
printf("sis%d: MII without any PHY!\n", sc->sis_unit);
|
|
bus_teardown_intr(dev, sc->sis_irq, sc->sis_intrhand);
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sis_irq);
|
|
bus_release_resource(dev, SIS_RES, SIS_RID, sc->sis_res);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
/*
|
|
* Call MI attach routines.
|
|
*/
|
|
if_attach(ifp);
|
|
ether_ifattach(ifp);
|
|
callout_handle_init(&sc->sis_stat_ch);
|
|
|
|
bpfattach(ifp, DLT_EN10MB, sizeof(struct ether_header));
|
|
|
|
fail:
|
|
splx(s);
|
|
return(error);
|
|
}
|
|
|
|
static int sis_detach(dev)
|
|
device_t dev;
|
|
{
|
|
struct sis_softc *sc;
|
|
struct ifnet *ifp;
|
|
int s;
|
|
|
|
s = splimp();
|
|
|
|
sc = device_get_softc(dev);
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
sis_reset(sc);
|
|
sis_stop(sc);
|
|
if_detach(ifp);
|
|
|
|
bus_generic_detach(dev);
|
|
device_delete_child(dev, sc->sis_miibus);
|
|
|
|
bus_teardown_intr(dev, sc->sis_irq, sc->sis_intrhand);
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sis_irq);
|
|
bus_release_resource(dev, SIS_RES, SIS_RID, sc->sis_res);
|
|
|
|
contigfree(sc->sis_ldata, sizeof(struct sis_list_data), M_DEVBUF);
|
|
|
|
splx(s);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Initialize the transmit descriptors.
|
|
*/
|
|
static int sis_list_tx_init(sc)
|
|
struct sis_softc *sc;
|
|
{
|
|
struct sis_list_data *ld;
|
|
struct sis_ring_data *cd;
|
|
int i;
|
|
|
|
cd = &sc->sis_cdata;
|
|
ld = sc->sis_ldata;
|
|
|
|
for (i = 0; i < SIS_TX_LIST_CNT; i++) {
|
|
if (i == (SIS_TX_LIST_CNT - 1)) {
|
|
ld->sis_tx_list[i].sis_nextdesc =
|
|
&ld->sis_tx_list[0];
|
|
ld->sis_tx_list[i].sis_next =
|
|
vtophys(&ld->sis_tx_list[0]);
|
|
} else {
|
|
ld->sis_tx_list[i].sis_nextdesc =
|
|
&ld->sis_tx_list[i + 1];
|
|
ld->sis_tx_list[i].sis_next =
|
|
vtophys(&ld->sis_tx_list[i + 1]);
|
|
}
|
|
ld->sis_tx_list[i].sis_mbuf = NULL;
|
|
ld->sis_tx_list[i].sis_ptr = 0;
|
|
ld->sis_tx_list[i].sis_ctl = 0;
|
|
}
|
|
|
|
cd->sis_tx_prod = cd->sis_tx_cons = cd->sis_tx_cnt = 0;
|
|
|
|
return(0);
|
|
}
|
|
|
|
|
|
/*
|
|
* Initialize the RX descriptors and allocate mbufs for them. Note that
|
|
* we arrange the descriptors in a closed ring, so that the last descriptor
|
|
* points back to the first.
|
|
*/
|
|
static int sis_list_rx_init(sc)
|
|
struct sis_softc *sc;
|
|
{
|
|
struct sis_list_data *ld;
|
|
struct sis_ring_data *cd;
|
|
int i;
|
|
|
|
ld = sc->sis_ldata;
|
|
cd = &sc->sis_cdata;
|
|
|
|
for (i = 0; i < SIS_RX_LIST_CNT; i++) {
|
|
if (sis_newbuf(sc, &ld->sis_rx_list[i], NULL) == ENOBUFS)
|
|
return(ENOBUFS);
|
|
if (i == (SIS_RX_LIST_CNT - 1)) {
|
|
ld->sis_rx_list[i].sis_nextdesc =
|
|
&ld->sis_rx_list[0];
|
|
ld->sis_rx_list[i].sis_next =
|
|
vtophys(&ld->sis_rx_list[0]);
|
|
} else {
|
|
ld->sis_rx_list[i].sis_nextdesc =
|
|
&ld->sis_rx_list[i + 1];
|
|
ld->sis_rx_list[i].sis_next =
|
|
vtophys(&ld->sis_rx_list[i + 1]);
|
|
}
|
|
}
|
|
|
|
cd->sis_rx_prod = 0;
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Initialize an RX descriptor and attach an MBUF cluster.
|
|
*/
|
|
static int sis_newbuf(sc, c, m)
|
|
struct sis_softc *sc;
|
|
struct sis_desc *c;
|
|
struct mbuf *m;
|
|
{
|
|
struct mbuf *m_new = NULL;
|
|
|
|
if (m == NULL) {
|
|
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
|
|
if (m_new == NULL) {
|
|
printf("sis%d: no memory for rx list "
|
|
"-- packet dropped!\n", sc->sis_unit);
|
|
return(ENOBUFS);
|
|
}
|
|
|
|
MCLGET(m_new, M_DONTWAIT);
|
|
if (!(m_new->m_flags & M_EXT)) {
|
|
printf("sis%d: no memory for rx list "
|
|
"-- packet dropped!\n", sc->sis_unit);
|
|
m_freem(m_new);
|
|
return(ENOBUFS);
|
|
}
|
|
m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
|
|
} else {
|
|
m_new = m;
|
|
m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
|
|
m_new->m_data = m_new->m_ext.ext_buf;
|
|
}
|
|
|
|
m_adj(m_new, sizeof(u_int64_t));
|
|
|
|
c->sis_mbuf = m_new;
|
|
c->sis_ptr = vtophys(mtod(m_new, caddr_t));
|
|
c->sis_ctl = SIS_RXLEN;
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* A frame has been uploaded: pass the resulting mbuf chain up to
|
|
* the higher level protocols.
|
|
*/
|
|
static void sis_rxeof(sc)
|
|
struct sis_softc *sc;
|
|
{
|
|
struct ether_header *eh;
|
|
struct mbuf *m;
|
|
struct ifnet *ifp;
|
|
struct sis_desc *cur_rx;
|
|
int i, total_len = 0;
|
|
u_int32_t rxstat;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
i = sc->sis_cdata.sis_rx_prod;
|
|
|
|
while(SIS_OWNDESC(&sc->sis_ldata->sis_rx_list[i])) {
|
|
struct mbuf *m0 = NULL;
|
|
|
|
cur_rx = &sc->sis_ldata->sis_rx_list[i];
|
|
rxstat = cur_rx->sis_rxstat;
|
|
m = cur_rx->sis_mbuf;
|
|
cur_rx->sis_mbuf = NULL;
|
|
total_len = SIS_RXBYTES(cur_rx);
|
|
SIS_INC(i, SIS_RX_LIST_CNT);
|
|
|
|
/*
|
|
* If an error occurs, update stats, clear the
|
|
* status word and leave the mbuf cluster in place:
|
|
* it should simply get re-used next time this descriptor
|
|
* comes up in the ring.
|
|
*/
|
|
if (!(rxstat & SIS_CMDSTS_PKT_OK)) {
|
|
ifp->if_ierrors++;
|
|
if (rxstat & SIS_RXSTAT_COLL)
|
|
ifp->if_collisions++;
|
|
sis_newbuf(sc, cur_rx, m);
|
|
continue;
|
|
}
|
|
|
|
/* No errors; receive the packet. */
|
|
m0 = m_devget(mtod(m, char *) - ETHER_ALIGN,
|
|
total_len + ETHER_ALIGN, 0, ifp, NULL);
|
|
sis_newbuf(sc, cur_rx, m);
|
|
if (m0 == NULL) {
|
|
ifp->if_ierrors++;
|
|
continue;
|
|
}
|
|
m_adj(m0, ETHER_ALIGN);
|
|
m = m0;
|
|
|
|
ifp->if_ipackets++;
|
|
eh = mtod(m, struct ether_header *);
|
|
|
|
/*
|
|
* Handle BPF listeners. Let the BPF user see the packet, but
|
|
* don't pass it up to the ether_input() layer unless it's
|
|
* a broadcast packet, multicast packet, matches our ethernet
|
|
* address or the interface is in promiscuous mode.
|
|
*/
|
|
if (ifp->if_bpf) {
|
|
bpf_mtap(ifp, m);
|
|
if (ifp->if_flags & IFF_PROMISC &&
|
|
(bcmp(eh->ether_dhost, sc->arpcom.ac_enaddr,
|
|
ETHER_ADDR_LEN) && !(eh->ether_dhost[0] & 1))) {
|
|
m_freem(m);
|
|
continue;
|
|
}
|
|
}
|
|
|
|
/* Remove header from mbuf and pass it on. */
|
|
m_adj(m, sizeof(struct ether_header));
|
|
ether_input(ifp, eh, m);
|
|
}
|
|
|
|
sc->sis_cdata.sis_rx_prod = i;
|
|
|
|
return;
|
|
}
|
|
|
|
void sis_rxeoc(sc)
|
|
struct sis_softc *sc;
|
|
{
|
|
sis_rxeof(sc);
|
|
sis_init(sc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* A frame was downloaded to the chip. It's safe for us to clean up
|
|
* the list buffers.
|
|
*/
|
|
|
|
static void sis_txeof(sc)
|
|
struct sis_softc *sc;
|
|
{
|
|
struct sis_desc *cur_tx = NULL;
|
|
struct ifnet *ifp;
|
|
u_int32_t idx;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
/* Clear the timeout timer. */
|
|
ifp->if_timer = 0;
|
|
|
|
/*
|
|
* Go through our tx list and free mbufs for those
|
|
* frames that have been transmitted.
|
|
*/
|
|
idx = sc->sis_cdata.sis_tx_cons;
|
|
while (idx != sc->sis_cdata.sis_tx_prod) {
|
|
cur_tx = &sc->sis_ldata->sis_tx_list[idx];
|
|
|
|
if (SIS_OWNDESC(cur_tx))
|
|
break;
|
|
|
|
if (cur_tx->sis_ctl & SIS_CMDSTS_MORE) {
|
|
sc->sis_cdata.sis_tx_cnt--;
|
|
SIS_INC(idx, SIS_TX_LIST_CNT);
|
|
continue;
|
|
}
|
|
|
|
if (!(cur_tx->sis_ctl & SIS_CMDSTS_PKT_OK)) {
|
|
ifp->if_oerrors++;
|
|
if (cur_tx->sis_txstat & SIS_TXSTAT_EXCESSCOLLS)
|
|
ifp->if_collisions++;
|
|
if (cur_tx->sis_txstat & SIS_TXSTAT_OUTOFWINCOLL)
|
|
ifp->if_collisions++;
|
|
}
|
|
|
|
ifp->if_collisions +=
|
|
(cur_tx->sis_txstat & SIS_TXSTAT_COLLCNT) >> 16;
|
|
|
|
ifp->if_opackets++;
|
|
if (cur_tx->sis_mbuf != NULL) {
|
|
m_freem(cur_tx->sis_mbuf);
|
|
cur_tx->sis_mbuf = NULL;
|
|
}
|
|
|
|
sc->sis_cdata.sis_tx_cnt--;
|
|
SIS_INC(idx, SIS_TX_LIST_CNT);
|
|
ifp->if_timer = 0;
|
|
}
|
|
|
|
sc->sis_cdata.sis_tx_cons = idx;
|
|
|
|
if (cur_tx != NULL)
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
|
|
return;
|
|
}
|
|
|
|
static void sis_tick(xsc)
|
|
void *xsc;
|
|
{
|
|
struct sis_softc *sc;
|
|
struct mii_data *mii;
|
|
int s;
|
|
|
|
s = splimp();
|
|
|
|
sc = xsc;
|
|
mii = device_get_softc(sc->sis_miibus);
|
|
mii_tick(mii);
|
|
sc->sis_stat_ch = timeout(sis_tick, sc, hz);
|
|
|
|
splx(s);
|
|
|
|
return;
|
|
}
|
|
|
|
static void sis_intr(arg)
|
|
void *arg;
|
|
{
|
|
struct sis_softc *sc;
|
|
struct ifnet *ifp;
|
|
u_int32_t status;
|
|
|
|
sc = arg;
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
/* Supress unwanted interrupts */
|
|
if (!(ifp->if_flags & IFF_UP)) {
|
|
sis_stop(sc);
|
|
return;
|
|
}
|
|
|
|
/* Disable interrupts. */
|
|
CSR_WRITE_4(sc, SIS_IER, 0);
|
|
|
|
for (;;) {
|
|
/* Reading the ISR register clears all interrupts. */
|
|
status = CSR_READ_4(sc, SIS_ISR);
|
|
|
|
if ((status & SIS_INTRS) == 0)
|
|
break;
|
|
|
|
if ((status & SIS_ISR_TX_OK) ||
|
|
(status & SIS_ISR_TX_ERR) ||
|
|
(status & SIS_ISR_TX_IDLE))
|
|
sis_txeof(sc);
|
|
|
|
if (status & SIS_ISR_RX_OK)
|
|
sis_rxeof(sc);
|
|
|
|
if ((status & SIS_ISR_RX_ERR) ||
|
|
(status & SIS_ISR_RX_OFLOW)) {
|
|
sis_rxeoc(sc);
|
|
}
|
|
|
|
if (status & SIS_ISR_SYSERR) {
|
|
sis_reset(sc);
|
|
sis_init(sc);
|
|
}
|
|
}
|
|
|
|
/* Re-enable interrupts. */
|
|
CSR_WRITE_4(sc, SIS_IER, 1);
|
|
|
|
if (ifp->if_snd.ifq_head != NULL)
|
|
sis_start(ifp);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Encapsulate an mbuf chain in a descriptor by coupling the mbuf data
|
|
* pointers to the fragment pointers.
|
|
*/
|
|
static int sis_encap(sc, m_head, txidx)
|
|
struct sis_softc *sc;
|
|
struct mbuf *m_head;
|
|
u_int32_t *txidx;
|
|
{
|
|
struct sis_desc *f = NULL;
|
|
struct mbuf *m;
|
|
int frag, cur, cnt = 0;
|
|
|
|
/*
|
|
* Start packing the mbufs in this chain into
|
|
* the fragment pointers. Stop when we run out
|
|
* of fragments or hit the end of the mbuf chain.
|
|
*/
|
|
m = m_head;
|
|
cur = frag = *txidx;
|
|
|
|
for (m = m_head; m != NULL; m = m->m_next) {
|
|
if (m->m_len != 0) {
|
|
if ((SIS_TX_LIST_CNT -
|
|
(sc->sis_cdata.sis_tx_cnt + cnt)) < 2)
|
|
return(ENOBUFS);
|
|
f = &sc->sis_ldata->sis_tx_list[frag];
|
|
f->sis_ctl = SIS_CMDSTS_MORE | m->m_len;
|
|
f->sis_ptr = vtophys(mtod(m, vm_offset_t));
|
|
if (cnt != 0)
|
|
f->sis_ctl |= SIS_CMDSTS_OWN;
|
|
cur = frag;
|
|
SIS_INC(frag, SIS_TX_LIST_CNT);
|
|
cnt++;
|
|
}
|
|
}
|
|
|
|
if (m != NULL)
|
|
return(ENOBUFS);
|
|
|
|
sc->sis_ldata->sis_tx_list[cur].sis_mbuf = m_head;
|
|
sc->sis_ldata->sis_tx_list[cur].sis_ctl &= ~SIS_CMDSTS_MORE;
|
|
sc->sis_ldata->sis_tx_list[*txidx].sis_ctl |= SIS_CMDSTS_OWN;
|
|
sc->sis_cdata.sis_tx_cnt += cnt;
|
|
*txidx = frag;
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Main transmit routine. To avoid having to do mbuf copies, we put pointers
|
|
* to the mbuf data regions directly in the transmit lists. We also save a
|
|
* copy of the pointers since the transmit list fragment pointers are
|
|
* physical addresses.
|
|
*/
|
|
|
|
static void sis_start(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct sis_softc *sc;
|
|
struct mbuf *m_head = NULL;
|
|
u_int32_t idx;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
idx = sc->sis_cdata.sis_tx_prod;
|
|
|
|
if (ifp->if_flags & IFF_OACTIVE)
|
|
return;
|
|
|
|
while(sc->sis_ldata->sis_tx_list[idx].sis_mbuf == NULL) {
|
|
IF_DEQUEUE(&ifp->if_snd, m_head);
|
|
if (m_head == NULL)
|
|
break;
|
|
|
|
if (sis_encap(sc, m_head, &idx)) {
|
|
IF_PREPEND(&ifp->if_snd, m_head);
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* If there's a BPF listener, bounce a copy of this frame
|
|
* to him.
|
|
*/
|
|
if (ifp->if_bpf)
|
|
bpf_mtap(ifp, m_head);
|
|
|
|
}
|
|
|
|
/* Transmit */
|
|
sc->sis_cdata.sis_tx_prod = idx;
|
|
SIS_SETBIT(sc, SIS_CSR, SIS_CSR_TX_ENABLE);
|
|
|
|
/*
|
|
* Set a timeout in case the chip goes out to lunch.
|
|
*/
|
|
ifp->if_timer = 5;
|
|
|
|
return;
|
|
}
|
|
|
|
static void sis_init(xsc)
|
|
void *xsc;
|
|
{
|
|
struct sis_softc *sc = xsc;
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
struct mii_data *mii;
|
|
int s;
|
|
|
|
s = splimp();
|
|
|
|
/*
|
|
* Cancel pending I/O and free all RX/TX buffers.
|
|
*/
|
|
sis_stop(sc);
|
|
|
|
mii = device_get_softc(sc->sis_miibus);
|
|
|
|
/* Set MAC address */
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR0);
|
|
CSR_WRITE_4(sc, SIS_RXFILT_DATA,
|
|
((u_int16_t *)sc->arpcom.ac_enaddr)[0]);
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR1);
|
|
CSR_WRITE_4(sc, SIS_RXFILT_DATA,
|
|
((u_int16_t *)sc->arpcom.ac_enaddr)[1]);
|
|
CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR2);
|
|
CSR_WRITE_4(sc, SIS_RXFILT_DATA,
|
|
((u_int16_t *)sc->arpcom.ac_enaddr)[2]);
|
|
|
|
/* Init circular RX list. */
|
|
if (sis_list_rx_init(sc) == ENOBUFS) {
|
|
printf("sis%d: initialization failed: no "
|
|
"memory for rx buffers\n", sc->sis_unit);
|
|
sis_stop(sc);
|
|
(void)splx(s);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Init tx descriptors.
|
|
*/
|
|
sis_list_tx_init(sc);
|
|
|
|
/* If we want promiscuous mode, set the allframes bit. */
|
|
if (ifp->if_flags & IFF_PROMISC) {
|
|
SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLPHYS);
|
|
} else {
|
|
SIS_CLRBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLPHYS);
|
|
}
|
|
|
|
/*
|
|
* Set the capture broadcast bit to capture broadcast frames.
|
|
*/
|
|
if (ifp->if_flags & IFF_BROADCAST) {
|
|
SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_BROAD);
|
|
} else {
|
|
SIS_CLRBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_BROAD);
|
|
}
|
|
|
|
/*
|
|
* Load the multicast filter.
|
|
*/
|
|
sis_setmulti(sc);
|
|
|
|
/* Turn the receive filter on */
|
|
SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ENABLE);
|
|
|
|
/*
|
|
* Load the address of the RX and TX lists.
|
|
*/
|
|
CSR_WRITE_4(sc, SIS_RX_LISTPTR,
|
|
vtophys(&sc->sis_ldata->sis_rx_list[0]));
|
|
CSR_WRITE_4(sc, SIS_TX_LISTPTR,
|
|
vtophys(&sc->sis_ldata->sis_tx_list[0]));
|
|
|
|
/* Set RX configuration */
|
|
CSR_WRITE_4(sc, SIS_RX_CFG, SIS_RXCFG);
|
|
/* Set TX configuration */
|
|
CSR_WRITE_4(sc, SIS_TX_CFG, SIS_TXCFG);
|
|
|
|
/*
|
|
* Enable interrupts.
|
|
*/
|
|
CSR_WRITE_4(sc, SIS_IMR, SIS_INTRS);
|
|
CSR_WRITE_4(sc, SIS_IER, 1);
|
|
|
|
/* Enable receiver and transmitter. */
|
|
SIS_CLRBIT(sc, SIS_CSR, SIS_CSR_TX_DISABLE|SIS_CSR_RX_DISABLE);
|
|
SIS_SETBIT(sc, SIS_CSR, SIS_CSR_RX_ENABLE);
|
|
|
|
mii_mediachg(mii);
|
|
|
|
ifp->if_flags |= IFF_RUNNING;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
|
|
(void)splx(s);
|
|
|
|
sc->sis_stat_ch = timeout(sis_tick, sc, hz);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Set media options.
|
|
*/
|
|
static int sis_ifmedia_upd(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct sis_softc *sc;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
if (ifp->if_flags & IFF_UP)
|
|
sis_init(sc);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Report current media status.
|
|
*/
|
|
static void sis_ifmedia_sts(ifp, ifmr)
|
|
struct ifnet *ifp;
|
|
struct ifmediareq *ifmr;
|
|
{
|
|
struct sis_softc *sc;
|
|
struct mii_data *mii;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
mii = device_get_softc(sc->sis_miibus);
|
|
mii_pollstat(mii);
|
|
ifmr->ifm_active = mii->mii_media_active;
|
|
ifmr->ifm_status = mii->mii_media_status;
|
|
|
|
return;
|
|
}
|
|
|
|
static int sis_ioctl(ifp, command, data)
|
|
struct ifnet *ifp;
|
|
u_long command;
|
|
caddr_t data;
|
|
{
|
|
struct sis_softc *sc = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
struct mii_data *mii;
|
|
int s, error = 0;
|
|
|
|
s = splimp();
|
|
|
|
switch(command) {
|
|
case SIOCSIFADDR:
|
|
case SIOCGIFADDR:
|
|
case SIOCSIFMTU:
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
case SIOCSIFFLAGS:
|
|
if (ifp->if_flags & IFF_UP) {
|
|
sis_init(sc);
|
|
} else {
|
|
if (ifp->if_flags & IFF_RUNNING)
|
|
sis_stop(sc);
|
|
}
|
|
error = 0;
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
sis_setmulti(sc);
|
|
error = 0;
|
|
break;
|
|
case SIOCGIFMEDIA:
|
|
case SIOCSIFMEDIA:
|
|
mii = device_get_softc(sc->sis_miibus);
|
|
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
|
|
break;
|
|
default:
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
|
|
(void)splx(s);
|
|
|
|
return(error);
|
|
}
|
|
|
|
static void sis_watchdog(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct sis_softc *sc;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
ifp->if_oerrors++;
|
|
printf("sis%d: watchdog timeout\n", sc->sis_unit);
|
|
|
|
sis_stop(sc);
|
|
sis_reset(sc);
|
|
sis_init(sc);
|
|
|
|
if (ifp->if_snd.ifq_head != NULL)
|
|
sis_start(ifp);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Stop the adapter and free any mbufs allocated to the
|
|
* RX and TX lists.
|
|
*/
|
|
static void sis_stop(sc)
|
|
struct sis_softc *sc;
|
|
{
|
|
register int i;
|
|
struct ifnet *ifp;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
ifp->if_timer = 0;
|
|
|
|
untimeout(sis_tick, sc, sc->sis_stat_ch);
|
|
CSR_WRITE_4(sc, SIS_IER, 0);
|
|
CSR_WRITE_4(sc, SIS_IMR, 0);
|
|
SIS_SETBIT(sc, SIS_CSR, SIS_CSR_TX_DISABLE|SIS_CSR_RX_DISABLE);
|
|
DELAY(1000);
|
|
CSR_WRITE_4(sc, SIS_TX_LISTPTR, 0);
|
|
CSR_WRITE_4(sc, SIS_RX_LISTPTR, 0);
|
|
|
|
/*
|
|
* Free data in the RX lists.
|
|
*/
|
|
for (i = 0; i < SIS_RX_LIST_CNT; i++) {
|
|
if (sc->sis_ldata->sis_rx_list[i].sis_mbuf != NULL) {
|
|
m_freem(sc->sis_ldata->sis_rx_list[i].sis_mbuf);
|
|
sc->sis_ldata->sis_rx_list[i].sis_mbuf = NULL;
|
|
}
|
|
}
|
|
bzero((char *)&sc->sis_ldata->sis_rx_list,
|
|
sizeof(sc->sis_ldata->sis_rx_list));
|
|
|
|
/*
|
|
* Free the TX list buffers.
|
|
*/
|
|
for (i = 0; i < SIS_TX_LIST_CNT; i++) {
|
|
if (sc->sis_ldata->sis_tx_list[i].sis_mbuf != NULL) {
|
|
m_freem(sc->sis_ldata->sis_tx_list[i].sis_mbuf);
|
|
sc->sis_ldata->sis_tx_list[i].sis_mbuf = NULL;
|
|
}
|
|
}
|
|
|
|
bzero((char *)&sc->sis_ldata->sis_tx_list,
|
|
sizeof(sc->sis_ldata->sis_tx_list));
|
|
|
|
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Stop all chip I/O so that the kernel's probe routines don't
|
|
* get confused by errant DMAs when rebooting.
|
|
*/
|
|
static void sis_shutdown(dev)
|
|
device_t dev;
|
|
{
|
|
struct sis_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
sis_reset(sc);
|
|
sis_stop(sc);
|
|
|
|
return;
|
|
}
|