3c7b39f7b5
14.00.00.01-fbsd. Their description of the changes is as follows: 1. Copyright contents has been changed in all respective .c and .h files 2. Support for WRITE12 and READ12 for direct-io (warpdrive only) has been added. 3. Driver has added checks to see if Drive has READ_CAP_16 support before sending it down to the device. If SPC3_SID_PROTECT flag is set in the inquiry data, the device supports protection information, and must support the 16 byte read capacity command, otherwise continue without sending read cap 16. This will optimize driver performance, since it will not send READ_CAP_16 to the drive which does not have support of READ_CAP_16. 4. With new approach, "MPTIOCTL_RESET_ADAPTER" IOCTL will not use DELAY() which is busy loop implementation. It will use <msleep> (Better way to sleep without busy loop). Also from the HBA reset code path and some other places, DELAY() is replaced with msleep() or "pause()", which is based on sleep/wakeup style calls. Driver use msleep()/pause() instead of DELAY based on CAN_SLEEP/NO_SLEEP flags to avoid busy loop which is not required all the time.e.a a. While driver is getting loaded, driver calls most of the commands with NO_SLEEP. b. When Driver is functional and it needs Reinit of HBA, CAN_SLEEP flag is used. 5. <mpslsi> driver is not Endian safe. It will not work on Big Endian machines like Sparc and PowerPC platforms because it assumes it is running on a Little Endian machine. Driver code is modified such way that it does not assume CPU arch is Little Endian. a. All places where Driver interacts from HBA to Host, it converts Little Endian format to CPU format. b. All places where Driver interacts from Host to HBA, it converts CPU format to Little Endian. 6. Findout memory leaks in FreeBSD Driver and resolve those, such as memory leak in targ's luns creation/deletion. Also added additional checks to see memory allocation success/fail. 7. Add loginfo prints as debug message, i.e. When FW sends any loginfo, Driver should print those as debug message. This will help for debugging purpose. 8. There is possibility to get config request timeout. Current driver is able to detect config request timetout, but it does not do anything on config_request timeout. Driver should call mps_reinit() if any request_poll (which is called as part of config_request) is time out. 9. cdb length check is required for 32 byte CDB. Add correct mpi control value for 32 bit CDB as below while submitting SCSI IO Request to controller. mpi_control |= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT; 10. Check the actual status of Message unit reset (mps_message_unit_reset).Previously FreeBSD Driver just writes MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET and never check the ack (it just wait for 50 millisecond). So, Driver now check the status of "MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET" after writing it to the FW. Now it also checking for whether doorbell ack uses msleep with proper sleep flags, instead of <DELAY>. 11. Previously CAM does not detect Multi-Lun Devices. In order to detect Multi-Lun Devices by CAM the driver needs following change set: a. There is "max_lun" field which Driver need to set based on hw/fw support. Currently LSI released driver does not set this field. b. Default of "max_lun" should not be 0 in OS, but it is currently set to 0 in CAM layer. c. Export max_lun capacity to 255 12. Driver will not reset target info after port enable complete and also do Device removal when Device remove from FW. The detail description is as follows a. When Driver receive WD PD add events, it will add all information in driver local data structure. b. Only for WD, we have below checks after port enable completes, where driver clear off all information retrieved at #1. if ((sc->WD_available && (sc->WD_hide_expose == MPS_WD_HIDE_ALWAYS)) || (sc->WD_valid_config && (sc->WD_hide_expose == MPS_WD_HIDE_IF_VOLUME)) { // clear off target data structure. } It is mainly not to attach PDs to OS. FreeBSD does bus rescan as older Parallel scsi style. So Driver needs to handle which Drive is visible to OS. That is a reason we have to clear off targ information for PDs. Again, above logic was implemented long time ago. Similar concept we have for non-wd also. For that, LSI have introduced different logic to hide PDs. Eventually, because of above gap, when Phy goes offline, we observe below failure. That is what Driver is not doing complete removal of device with FW. (which was pointed by Scott) Apr 5 02:39:24 Freebsd7 kernel: mpslsi0: mpssas_prepare_remove Apr 5 02:39:24 Freebsd7 kernel: mpssas_prepare_remove 497 : invalid handle 0xe Now Driver will not reset target info after port enable complete and also will do Device removal when Device remove from FW. 13. Returning "CAM_SEL_TIMEOUT" instead of "CAM_TID_INVALID" error code on request to the Target IDs that have no devices conected at that moment. As if "CAM_TID_INVALID" error code is returned to the CAM Layaer then it results in a huge chain of errors in verbose kernel messages on boot and every hot-plug event. Submitted by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> MFC after: 3 days
2269 lines
69 KiB
C
2269 lines
69 KiB
C
/*-
|
|
* Copyright (c) 2011, 2012 LSI Corp.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* LSI MPT-Fusion Host Adapter FreeBSD
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/* TODO Move headers to mpsvar */
|
|
#include <sys/types.h>
|
|
#include <sys/param.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kthread.h>
|
|
#include <sys/taskqueue.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/eventhandler.h>
|
|
#include <sys/uio.h>
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <dev/mps/mpi/mpi2_type.h>
|
|
#include <dev/mps/mpi/mpi2.h>
|
|
#include <dev/mps/mpi/mpi2_ioc.h>
|
|
#include <dev/mps/mpi/mpi2_sas.h>
|
|
#include <dev/mps/mpi/mpi2_cnfg.h>
|
|
#include <dev/mps/mpi/mpi2_init.h>
|
|
#include <dev/mps/mpi/mpi2_tool.h>
|
|
#include <dev/mps/mps_ioctl.h>
|
|
#include <dev/mps/mpsvar.h>
|
|
#include <dev/mps/mps_mapping.h>
|
|
|
|
/**
|
|
* _mapping_clear_entry - Clear a particular mapping entry.
|
|
* @map_entry: map table entry
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
static inline void
|
|
_mapping_clear_map_entry(struct dev_mapping_table *map_entry)
|
|
{
|
|
map_entry->physical_id = 0;
|
|
map_entry->device_info = 0;
|
|
map_entry->phy_bits = 0;
|
|
map_entry->dpm_entry_num = MPS_DPM_BAD_IDX;
|
|
map_entry->dev_handle = 0;
|
|
map_entry->channel = -1;
|
|
map_entry->id = -1;
|
|
map_entry->missing_count = 0;
|
|
map_entry->init_complete = 0;
|
|
map_entry->TLR_bits = (u8)MPI2_SCSIIO_CONTROL_NO_TLR;
|
|
}
|
|
|
|
/**
|
|
* _mapping_clear_enc_entry - Clear a particular enclosure table entry.
|
|
* @enc_entry: enclosure table entry
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
static inline void
|
|
_mapping_clear_enc_entry(struct enc_mapping_table *enc_entry)
|
|
{
|
|
enc_entry->enclosure_id = 0;
|
|
enc_entry->start_index = MPS_MAPTABLE_BAD_IDX;
|
|
enc_entry->phy_bits = 0;
|
|
enc_entry->dpm_entry_num = MPS_DPM_BAD_IDX;
|
|
enc_entry->enc_handle = 0;
|
|
enc_entry->num_slots = 0;
|
|
enc_entry->start_slot = 0;
|
|
enc_entry->missing_count = 0;
|
|
enc_entry->removal_flag = 0;
|
|
enc_entry->skip_search = 0;
|
|
enc_entry->init_complete = 0;
|
|
}
|
|
|
|
/**
|
|
* _mapping_commit_enc_entry - write a particular enc entry in DPM page0.
|
|
* @sc: per adapter object
|
|
* @enc_entry: enclosure table entry
|
|
*
|
|
* Returns 0 for success, non-zero for failure.
|
|
*/
|
|
static int
|
|
_mapping_commit_enc_entry(struct mps_softc *sc,
|
|
struct enc_mapping_table *et_entry)
|
|
{
|
|
Mpi2DriverMap0Entry_t *dpm_entry;
|
|
struct dev_mapping_table *mt_entry;
|
|
Mpi2ConfigReply_t mpi_reply;
|
|
Mpi2DriverMappingPage0_t config_page;
|
|
|
|
if (!sc->is_dpm_enable)
|
|
return 0;
|
|
|
|
memset(&config_page, 0, sizeof(Mpi2DriverMappingPage0_t));
|
|
memcpy(&config_page.Header, (u8 *) sc->dpm_pg0,
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 +
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
dpm_entry += et_entry->dpm_entry_num;
|
|
dpm_entry->PhysicalIdentifier.Low =
|
|
( 0xFFFFFFFF & et_entry->enclosure_id);
|
|
dpm_entry->PhysicalIdentifier.High =
|
|
( et_entry->enclosure_id >> 32);
|
|
mt_entry = &sc->mapping_table[et_entry->start_index];
|
|
dpm_entry->DeviceIndex = htole16(mt_entry->id);
|
|
dpm_entry->MappingInformation = et_entry->num_slots;
|
|
dpm_entry->MappingInformation <<= MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT;
|
|
dpm_entry->MappingInformation |= et_entry->missing_count;
|
|
dpm_entry->MappingInformation = htole16(dpm_entry->MappingInformation);
|
|
dpm_entry->PhysicalBitsMapping = htole32(et_entry->phy_bits);
|
|
dpm_entry->Reserved1 = 0;
|
|
|
|
memcpy(&config_page.Entry, (u8 *)dpm_entry,
|
|
sizeof(Mpi2DriverMap0Entry_t));
|
|
if (mps_config_set_dpm_pg0(sc, &mpi_reply, &config_page,
|
|
et_entry->dpm_entry_num)) {
|
|
printf("%s: write of dpm entry %d for enclosure failed\n",
|
|
__func__, et_entry->dpm_entry_num);
|
|
dpm_entry->MappingInformation = le16toh(dpm_entry->
|
|
MappingInformation);
|
|
dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex);
|
|
dpm_entry->PhysicalBitsMapping =
|
|
le32toh(dpm_entry->PhysicalBitsMapping);
|
|
return -1;
|
|
}
|
|
dpm_entry->MappingInformation = le16toh(dpm_entry->
|
|
MappingInformation);
|
|
dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex);
|
|
dpm_entry->PhysicalBitsMapping =
|
|
le32toh(dpm_entry->PhysicalBitsMapping);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _mapping_commit_map_entry - write a particular map table entry in DPM page0.
|
|
* @sc: per adapter object
|
|
* @enc_entry: enclosure table entry
|
|
*
|
|
* Returns 0 for success, non-zero for failure.
|
|
*/
|
|
|
|
static int
|
|
_mapping_commit_map_entry(struct mps_softc *sc,
|
|
struct dev_mapping_table *mt_entry)
|
|
{
|
|
Mpi2DriverMap0Entry_t *dpm_entry;
|
|
Mpi2ConfigReply_t mpi_reply;
|
|
Mpi2DriverMappingPage0_t config_page;
|
|
|
|
if (!sc->is_dpm_enable)
|
|
return 0;
|
|
|
|
memset(&config_page, 0, sizeof(Mpi2DriverMappingPage0_t));
|
|
memcpy(&config_page.Header, (u8 *)sc->dpm_pg0,
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *) sc->dpm_pg0 +
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
dpm_entry = dpm_entry + mt_entry->dpm_entry_num;
|
|
dpm_entry->PhysicalIdentifier.Low = (0xFFFFFFFF &
|
|
mt_entry->physical_id);
|
|
dpm_entry->PhysicalIdentifier.High = (mt_entry->physical_id >> 32);
|
|
dpm_entry->DeviceIndex = htole16(mt_entry->id);
|
|
dpm_entry->MappingInformation = htole16(mt_entry->missing_count);
|
|
dpm_entry->PhysicalBitsMapping = 0;
|
|
dpm_entry->Reserved1 = 0;
|
|
dpm_entry->MappingInformation = htole16(dpm_entry->MappingInformation);
|
|
memcpy(&config_page.Entry, (u8 *)dpm_entry,
|
|
sizeof(Mpi2DriverMap0Entry_t));
|
|
if (mps_config_set_dpm_pg0(sc, &mpi_reply, &config_page,
|
|
mt_entry->dpm_entry_num)) {
|
|
printf("%s: write of dpm entry %d for device failed\n",
|
|
__func__, mt_entry->dpm_entry_num);
|
|
dpm_entry->MappingInformation = le16toh(dpm_entry->
|
|
MappingInformation);
|
|
dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex);
|
|
return -1;
|
|
}
|
|
|
|
dpm_entry->MappingInformation = le16toh(dpm_entry->MappingInformation);
|
|
dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_ir_maprange - get start and end index for IR map range.
|
|
* @sc: per adapter object
|
|
* @start_idx: place holder for start index
|
|
* @end_idx: place holder for end index
|
|
*
|
|
* The IR volumes can be mapped either at start or end of the mapping table
|
|
* this function gets the detail of where IR volume mapping starts and ends
|
|
* in the device mapping table
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
static void
|
|
_mapping_get_ir_maprange(struct mps_softc *sc, u32 *start_idx, u32 *end_idx)
|
|
{
|
|
u16 volume_mapping_flags;
|
|
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
|
|
volume_mapping_flags = le16toh(sc->ioc_pg8.IRVolumeMappingFlags) &
|
|
MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
|
|
if (volume_mapping_flags == MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) {
|
|
*start_idx = 0;
|
|
if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0)
|
|
*start_idx = 1;
|
|
} else
|
|
*start_idx = sc->max_devices - sc->max_volumes;
|
|
*end_idx = *start_idx + sc->max_volumes - 1;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_enc_idx_from_id - get enclosure index from enclosure ID
|
|
* @sc: per adapter object
|
|
* @enc_id: enclosure logical identifier
|
|
*
|
|
* Returns the index of enclosure entry on success or bad index.
|
|
*/
|
|
static u8
|
|
_mapping_get_enc_idx_from_id(struct mps_softc *sc, u64 enc_id,
|
|
u64 phy_bits)
|
|
{
|
|
struct enc_mapping_table *et_entry;
|
|
u8 enc_idx = 0;
|
|
|
|
for (enc_idx = 0; enc_idx < sc->num_enc_table_entries; enc_idx++) {
|
|
et_entry = &sc->enclosure_table[enc_idx];
|
|
if ((et_entry->enclosure_id == le64toh(enc_id)) &&
|
|
(!et_entry->phy_bits || (et_entry->phy_bits &
|
|
le32toh(phy_bits))))
|
|
return enc_idx;
|
|
}
|
|
return MPS_ENCTABLE_BAD_IDX;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_enc_idx_from_handle - get enclosure index from handle
|
|
* @sc: per adapter object
|
|
* @enc_id: enclosure handle
|
|
*
|
|
* Returns the index of enclosure entry on success or bad index.
|
|
*/
|
|
static u8
|
|
_mapping_get_enc_idx_from_handle(struct mps_softc *sc, u16 handle)
|
|
{
|
|
struct enc_mapping_table *et_entry;
|
|
u8 enc_idx = 0;
|
|
|
|
for (enc_idx = 0; enc_idx < sc->num_enc_table_entries; enc_idx++) {
|
|
et_entry = &sc->enclosure_table[enc_idx];
|
|
if (et_entry->missing_count)
|
|
continue;
|
|
if (et_entry->enc_handle == handle)
|
|
return enc_idx;
|
|
}
|
|
return MPS_ENCTABLE_BAD_IDX;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_high_missing_et_idx - get missing enclosure index
|
|
* @sc: per adapter object
|
|
*
|
|
* Search through the enclosure table and identifies the enclosure entry
|
|
* with high missing count and returns it's index
|
|
*
|
|
* Returns the index of enclosure entry on success or bad index.
|
|
*/
|
|
static u8
|
|
_mapping_get_high_missing_et_idx(struct mps_softc *sc)
|
|
{
|
|
struct enc_mapping_table *et_entry;
|
|
u8 high_missing_count = 0;
|
|
u8 enc_idx, high_idx = MPS_ENCTABLE_BAD_IDX;
|
|
|
|
for (enc_idx = 0; enc_idx < sc->num_enc_table_entries; enc_idx++) {
|
|
et_entry = &sc->enclosure_table[enc_idx];
|
|
if ((et_entry->missing_count > high_missing_count) &&
|
|
!et_entry->skip_search) {
|
|
high_missing_count = et_entry->missing_count;
|
|
high_idx = enc_idx;
|
|
}
|
|
}
|
|
return high_idx;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_high_missing_mt_idx - get missing map table index
|
|
* @sc: per adapter object
|
|
*
|
|
* Search through the map table and identifies the device entry
|
|
* with high missing count and returns it's index
|
|
*
|
|
* Returns the index of map table entry on success or bad index.
|
|
*/
|
|
static u32
|
|
_mapping_get_high_missing_mt_idx(struct mps_softc *sc)
|
|
{
|
|
u32 map_idx, high_idx = MPS_ENCTABLE_BAD_IDX;
|
|
u8 high_missing_count = 0;
|
|
u32 start_idx, end_idx, start_idx_ir, end_idx_ir;
|
|
struct dev_mapping_table *mt_entry;
|
|
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
|
|
start_idx = 0;
|
|
end_idx = sc->max_devices;
|
|
if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0)
|
|
start_idx = 1;
|
|
if (sc->ir_firmware)
|
|
_mapping_get_ir_maprange(sc, &start_idx_ir, &end_idx_ir);
|
|
if (start_idx == start_idx_ir)
|
|
start_idx = end_idx_ir + 1;
|
|
else
|
|
end_idx = start_idx_ir;
|
|
mt_entry = &sc->mapping_table[start_idx];
|
|
for (map_idx = start_idx; map_idx < end_idx; map_idx++, mt_entry++) {
|
|
if (mt_entry->missing_count > high_missing_count) {
|
|
high_missing_count = mt_entry->missing_count;
|
|
high_idx = map_idx;
|
|
}
|
|
}
|
|
return high_idx;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_ir_mt_idx_from_wwid - get map table index from volume WWID
|
|
* @sc: per adapter object
|
|
* @wwid: world wide unique ID of the volume
|
|
*
|
|
* Returns the index of map table entry on success or bad index.
|
|
*/
|
|
static u32
|
|
_mapping_get_ir_mt_idx_from_wwid(struct mps_softc *sc, u64 wwid)
|
|
{
|
|
u32 start_idx, end_idx, map_idx;
|
|
struct dev_mapping_table *mt_entry;
|
|
|
|
_mapping_get_ir_maprange(sc, &start_idx, &end_idx);
|
|
mt_entry = &sc->mapping_table[start_idx];
|
|
for (map_idx = start_idx; map_idx <= end_idx; map_idx++, mt_entry++)
|
|
if (mt_entry->physical_id == wwid)
|
|
return map_idx;
|
|
|
|
return MPS_MAPTABLE_BAD_IDX;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_mt_idx_from_id - get map table index from a device ID
|
|
* @sc: per adapter object
|
|
* @dev_id: device identifer (SAS Address)
|
|
*
|
|
* Returns the index of map table entry on success or bad index.
|
|
*/
|
|
static u32
|
|
_mapping_get_mt_idx_from_id(struct mps_softc *sc, u64 dev_id)
|
|
{
|
|
u32 map_idx;
|
|
struct dev_mapping_table *mt_entry;
|
|
|
|
for (map_idx = 0; map_idx < sc->max_devices; map_idx++) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (mt_entry->physical_id == dev_id)
|
|
return map_idx;
|
|
}
|
|
return MPS_MAPTABLE_BAD_IDX;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_ir_mt_idx_from_handle - get map table index from volume handle
|
|
* @sc: per adapter object
|
|
* @wwid: volume device handle
|
|
*
|
|
* Returns the index of map table entry on success or bad index.
|
|
*/
|
|
static u32
|
|
_mapping_get_ir_mt_idx_from_handle(struct mps_softc *sc, u16 volHandle)
|
|
{
|
|
u32 start_idx, end_idx, map_idx;
|
|
struct dev_mapping_table *mt_entry;
|
|
|
|
_mapping_get_ir_maprange(sc, &start_idx, &end_idx);
|
|
mt_entry = &sc->mapping_table[start_idx];
|
|
for (map_idx = start_idx; map_idx <= end_idx; map_idx++, mt_entry++)
|
|
if (mt_entry->dev_handle == volHandle)
|
|
return map_idx;
|
|
|
|
return MPS_MAPTABLE_BAD_IDX;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_mt_idx_from_handle - get map table index from handle
|
|
* @sc: per adapter object
|
|
* @dev_id: device handle
|
|
*
|
|
* Returns the index of map table entry on success or bad index.
|
|
*/
|
|
static u32
|
|
_mapping_get_mt_idx_from_handle(struct mps_softc *sc, u16 handle)
|
|
{
|
|
u32 map_idx;
|
|
struct dev_mapping_table *mt_entry;
|
|
|
|
for (map_idx = 0; map_idx < sc->max_devices; map_idx++) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (mt_entry->dev_handle == handle)
|
|
return map_idx;
|
|
}
|
|
return MPS_MAPTABLE_BAD_IDX;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_free_ir_mt_idx - get first free index for a volume
|
|
* @sc: per adapter object
|
|
*
|
|
* Search through mapping table for free index for a volume and if no free
|
|
* index then looks for a volume with high mapping index
|
|
*
|
|
* Returns the index of map table entry on success or bad index.
|
|
*/
|
|
static u32
|
|
_mapping_get_free_ir_mt_idx(struct mps_softc *sc)
|
|
{
|
|
u8 high_missing_count = 0;
|
|
u32 start_idx, end_idx, map_idx;
|
|
u32 high_idx = MPS_MAPTABLE_BAD_IDX;
|
|
struct dev_mapping_table *mt_entry;
|
|
|
|
_mapping_get_ir_maprange(sc, &start_idx, &end_idx);
|
|
|
|
mt_entry = &sc->mapping_table[start_idx];
|
|
for (map_idx = start_idx; map_idx <= end_idx; map_idx++, mt_entry++)
|
|
if (!(mt_entry->device_info & MPS_MAP_IN_USE))
|
|
return map_idx;
|
|
|
|
mt_entry = &sc->mapping_table[start_idx];
|
|
for (map_idx = start_idx; map_idx <= end_idx; map_idx++, mt_entry++) {
|
|
if (mt_entry->missing_count > high_missing_count) {
|
|
high_missing_count = mt_entry->missing_count;
|
|
high_idx = map_idx;
|
|
}
|
|
}
|
|
return high_idx;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_free_mt_idx - get first free index for a device
|
|
* @sc: per adapter object
|
|
* @start_idx: offset in the table to start search
|
|
*
|
|
* Returns the index of map table entry on success or bad index.
|
|
*/
|
|
static u32
|
|
_mapping_get_free_mt_idx(struct mps_softc *sc, u32 start_idx)
|
|
{
|
|
u32 map_idx, max_idx = sc->max_devices;
|
|
struct dev_mapping_table *mt_entry = &sc->mapping_table[start_idx];
|
|
u16 volume_mapping_flags;
|
|
|
|
volume_mapping_flags = le16toh(sc->ioc_pg8.IRVolumeMappingFlags) &
|
|
MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
|
|
if (sc->ir_firmware && (volume_mapping_flags ==
|
|
MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING))
|
|
max_idx -= sc->max_volumes;
|
|
for (map_idx = start_idx; map_idx < max_idx; map_idx++, mt_entry++)
|
|
if (!(mt_entry->device_info & (MPS_MAP_IN_USE |
|
|
MPS_DEV_RESERVED)))
|
|
return map_idx;
|
|
|
|
return MPS_MAPTABLE_BAD_IDX;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_dpm_idx_from_id - get DPM index from ID
|
|
* @sc: per adapter object
|
|
* @id: volume WWID or enclosure ID or device ID
|
|
*
|
|
* Returns the index of DPM entry on success or bad index.
|
|
*/
|
|
static u16
|
|
_mapping_get_dpm_idx_from_id(struct mps_softc *sc, u64 id, u32 phy_bits)
|
|
{
|
|
u16 entry_num;
|
|
uint64_t PhysicalIdentifier;
|
|
Mpi2DriverMap0Entry_t *dpm_entry;
|
|
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 +
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
PhysicalIdentifier = dpm_entry->PhysicalIdentifier.High;
|
|
PhysicalIdentifier = (PhysicalIdentifier << 32) |
|
|
dpm_entry->PhysicalIdentifier.Low;
|
|
for (entry_num = 0; entry_num < sc->max_dpm_entries; entry_num++,
|
|
dpm_entry++)
|
|
if ((id == PhysicalIdentifier) &&
|
|
(!phy_bits || !dpm_entry->PhysicalBitsMapping ||
|
|
(phy_bits & dpm_entry->PhysicalBitsMapping)))
|
|
return entry_num;
|
|
|
|
return MPS_DPM_BAD_IDX;
|
|
}
|
|
|
|
|
|
/**
|
|
* _mapping_get_free_dpm_idx - get first available DPM index
|
|
* @sc: per adapter object
|
|
*
|
|
* Returns the index of DPM entry on success or bad index.
|
|
*/
|
|
static u32
|
|
_mapping_get_free_dpm_idx(struct mps_softc *sc)
|
|
{
|
|
u16 entry_num;
|
|
|
|
for (entry_num = 0; entry_num < sc->max_dpm_entries; entry_num++) {
|
|
if (!sc->dpm_entry_used[entry_num])
|
|
return entry_num;
|
|
}
|
|
return MPS_DPM_BAD_IDX;
|
|
}
|
|
|
|
/**
|
|
* _mapping_update_ir_missing_cnt - Updates missing count for a volume
|
|
* @sc: per adapter object
|
|
* @map_idx: map table index of the volume
|
|
* @element: IR configuration change element
|
|
* @wwid: IR volume ID.
|
|
*
|
|
* Updates the missing count in the map table and in the DPM entry for a volume
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
static void
|
|
_mapping_update_ir_missing_cnt(struct mps_softc *sc, u32 map_idx,
|
|
Mpi2EventIrConfigElement_t *element, u64 wwid)
|
|
{
|
|
struct dev_mapping_table *mt_entry;
|
|
u8 missing_cnt, reason = element->ReasonCode;
|
|
u16 dpm_idx;
|
|
Mpi2DriverMap0Entry_t *dpm_entry;
|
|
|
|
if (!sc->is_dpm_enable)
|
|
return;
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (reason == MPI2_EVENT_IR_CHANGE_RC_ADDED) {
|
|
mt_entry->missing_count = 0;
|
|
} else if (reason == MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED) {
|
|
mt_entry->missing_count = 0;
|
|
mt_entry->init_complete = 0;
|
|
} else if ((reason == MPI2_EVENT_IR_CHANGE_RC_REMOVED) ||
|
|
(reason == MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED)) {
|
|
if (!mt_entry->init_complete) {
|
|
if (mt_entry->missing_count < MPS_MAX_MISSING_COUNT)
|
|
mt_entry->missing_count++;
|
|
else
|
|
mt_entry->init_complete = 1;
|
|
}
|
|
if (!mt_entry->missing_count)
|
|
mt_entry->missing_count++;
|
|
mt_entry->dev_handle = 0;
|
|
}
|
|
|
|
dpm_idx = mt_entry->dpm_entry_num;
|
|
if (dpm_idx == MPS_DPM_BAD_IDX) {
|
|
if ((reason == MPI2_EVENT_IR_CHANGE_RC_ADDED) ||
|
|
(reason == MPI2_EVENT_IR_CHANGE_RC_REMOVED))
|
|
dpm_idx = _mapping_get_dpm_idx_from_id(sc,
|
|
mt_entry->physical_id, 0);
|
|
else if (reason == MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED)
|
|
return;
|
|
}
|
|
if (dpm_idx != MPS_DPM_BAD_IDX) {
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 +
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
dpm_entry += dpm_idx;
|
|
missing_cnt = dpm_entry->MappingInformation &
|
|
MPI2_DRVMAP0_MAPINFO_MISSING_MASK;
|
|
if ((mt_entry->physical_id ==
|
|
le64toh((u64)dpm_entry->PhysicalIdentifier.High |
|
|
dpm_entry->PhysicalIdentifier.Low)) && (missing_cnt ==
|
|
mt_entry->missing_count))
|
|
mt_entry->init_complete = 1;
|
|
} else {
|
|
dpm_idx = _mapping_get_free_dpm_idx(sc);
|
|
mt_entry->init_complete = 0;
|
|
}
|
|
|
|
if ((dpm_idx != MPS_DPM_BAD_IDX) && !mt_entry->init_complete) {
|
|
mt_entry->init_complete = 1;
|
|
mt_entry->dpm_entry_num = dpm_idx;
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 +
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
dpm_entry += dpm_idx;
|
|
dpm_entry->PhysicalIdentifier.Low =
|
|
(0xFFFFFFFF & mt_entry->physical_id);
|
|
dpm_entry->PhysicalIdentifier.High =
|
|
(mt_entry->physical_id >> 32);
|
|
dpm_entry->DeviceIndex = map_idx;
|
|
dpm_entry->MappingInformation = mt_entry->missing_count;
|
|
dpm_entry->PhysicalBitsMapping = 0;
|
|
dpm_entry->Reserved1 = 0;
|
|
sc->dpm_flush_entry[dpm_idx] = 1;
|
|
sc->dpm_entry_used[dpm_idx] = 1;
|
|
} else if (dpm_idx == MPS_DPM_BAD_IDX) {
|
|
printf("%s: no space to add entry in DPM table\n", __func__);
|
|
mt_entry->init_complete = 1;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* _mapping_add_to_removal_table - mark an entry for removal
|
|
* @sc: per adapter object
|
|
* @handle: Handle of enclosures/device/volume
|
|
*
|
|
* Adds the handle or DPM entry number in removal table.
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
static void
|
|
_mapping_add_to_removal_table(struct mps_softc *sc, u16 handle,
|
|
u16 dpm_idx)
|
|
{
|
|
struct map_removal_table *remove_entry;
|
|
u32 i;
|
|
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
|
|
remove_entry = sc->removal_table;
|
|
|
|
for (i = 0; i < sc->max_devices; i++, remove_entry++) {
|
|
if (remove_entry->dev_handle || remove_entry->dpm_entry_num !=
|
|
MPS_DPM_BAD_IDX)
|
|
continue;
|
|
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
|
|
if (dpm_idx)
|
|
remove_entry->dpm_entry_num = dpm_idx;
|
|
if (remove_entry->dpm_entry_num == MPS_DPM_BAD_IDX)
|
|
remove_entry->dev_handle = handle;
|
|
} else if ((ioc_pg8_flags &
|
|
MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING)
|
|
remove_entry->dev_handle = handle;
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* _mapping_update_missing_count - Update missing count for a device
|
|
* @sc: per adapter object
|
|
* @topo_change: Topology change event entry
|
|
*
|
|
* Search through the topology change list and if any device is found not
|
|
* responding it's associated map table entry and DPM entry is updated
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
static void
|
|
_mapping_update_missing_count(struct mps_softc *sc,
|
|
struct _map_topology_change *topo_change)
|
|
{
|
|
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
u8 entry;
|
|
struct _map_phy_change *phy_change;
|
|
u32 map_idx;
|
|
struct dev_mapping_table *mt_entry;
|
|
Mpi2DriverMap0Entry_t *dpm_entry;
|
|
|
|
for (entry = 0; entry < topo_change->num_entries; entry++) {
|
|
phy_change = &topo_change->phy_details[entry];
|
|
if (!phy_change->dev_handle || (phy_change->reason !=
|
|
MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING))
|
|
continue;
|
|
map_idx = _mapping_get_mt_idx_from_handle(sc, phy_change->
|
|
dev_handle);
|
|
phy_change->is_processed = 1;
|
|
if (map_idx == MPS_MAPTABLE_BAD_IDX) {
|
|
printf("%s: device is already removed from mapping "
|
|
"table\n", __func__);
|
|
continue;
|
|
}
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (!mt_entry->init_complete) {
|
|
if (mt_entry->missing_count < MPS_MAX_MISSING_COUNT)
|
|
mt_entry->missing_count++;
|
|
else
|
|
mt_entry->init_complete = 1;
|
|
}
|
|
if (!mt_entry->missing_count)
|
|
mt_entry->missing_count++;
|
|
_mapping_add_to_removal_table(sc, mt_entry->dev_handle, 0);
|
|
mt_entry->dev_handle = 0;
|
|
|
|
if (((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) &&
|
|
sc->is_dpm_enable && !mt_entry->init_complete &&
|
|
mt_entry->dpm_entry_num != MPS_DPM_BAD_IDX) {
|
|
dpm_entry =
|
|
(Mpi2DriverMap0Entry_t *) ((u8 *)sc->dpm_pg0 +
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
dpm_entry += mt_entry->dpm_entry_num;
|
|
dpm_entry->MappingInformation = mt_entry->missing_count;
|
|
sc->dpm_flush_entry[mt_entry->dpm_entry_num] = 1;
|
|
}
|
|
mt_entry->init_complete = 1;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* _mapping_find_enc_map_space -find map table entries for enclosure
|
|
* @sc: per adapter object
|
|
* @et_entry: enclosure entry
|
|
*
|
|
* Search through the mapping table defragment it and provide contiguous
|
|
* space in map table for a particular enclosure entry
|
|
*
|
|
* Returns start index in map table or bad index.
|
|
*/
|
|
static u32
|
|
_mapping_find_enc_map_space(struct mps_softc *sc,
|
|
struct enc_mapping_table *et_entry)
|
|
{
|
|
u16 vol_mapping_flags;
|
|
u32 skip_count, end_of_table, map_idx, enc_idx;
|
|
u16 num_found;
|
|
u32 start_idx = MPS_MAPTABLE_BAD_IDX;
|
|
struct dev_mapping_table *mt_entry;
|
|
struct enc_mapping_table *enc_entry;
|
|
unsigned char done_flag = 0, found_space;
|
|
u16 max_num_phy_ids = le16toh(sc->ioc_pg8.MaxNumPhysicalMappedIDs);
|
|
|
|
skip_count = sc->num_rsvd_entries;
|
|
num_found = 0;
|
|
|
|
vol_mapping_flags = le16toh(sc->ioc_pg8.IRVolumeMappingFlags) &
|
|
MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
|
|
|
|
if (!sc->ir_firmware)
|
|
end_of_table = sc->max_devices;
|
|
else if (vol_mapping_flags == MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING)
|
|
end_of_table = sc->max_devices;
|
|
else
|
|
end_of_table = sc->max_devices - sc->max_volumes;
|
|
|
|
for (map_idx = (max_num_phy_ids + skip_count);
|
|
map_idx < end_of_table; map_idx++) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if ((et_entry->enclosure_id == mt_entry->physical_id) &&
|
|
(!mt_entry->phy_bits || (mt_entry->phy_bits &
|
|
et_entry->phy_bits))) {
|
|
num_found += 1;
|
|
if (num_found == et_entry->num_slots) {
|
|
start_idx = (map_idx - num_found) + 1;
|
|
return start_idx;
|
|
}
|
|
} else
|
|
num_found = 0;
|
|
}
|
|
for (map_idx = (max_num_phy_ids + skip_count);
|
|
map_idx < end_of_table; map_idx++) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (!(mt_entry->device_info & MPS_DEV_RESERVED)) {
|
|
num_found += 1;
|
|
if (num_found == et_entry->num_slots) {
|
|
start_idx = (map_idx - num_found) + 1;
|
|
return start_idx;
|
|
}
|
|
} else
|
|
num_found = 0;
|
|
}
|
|
|
|
while (!done_flag) {
|
|
enc_idx = _mapping_get_high_missing_et_idx(sc);
|
|
if (enc_idx == MPS_ENCTABLE_BAD_IDX)
|
|
return MPS_MAPTABLE_BAD_IDX;
|
|
enc_entry = &sc->enclosure_table[enc_idx];
|
|
/*VSP FIXME*/
|
|
enc_entry->skip_search = 1;
|
|
mt_entry = &sc->mapping_table[enc_entry->start_index];
|
|
for (map_idx = enc_entry->start_index; map_idx <
|
|
(enc_entry->start_index + enc_entry->num_slots); map_idx++,
|
|
mt_entry++)
|
|
mt_entry->device_info &= ~MPS_DEV_RESERVED;
|
|
found_space = 0;
|
|
for (map_idx = (max_num_phy_ids +
|
|
skip_count); map_idx < end_of_table; map_idx++) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (!(mt_entry->device_info & MPS_DEV_RESERVED)) {
|
|
num_found += 1;
|
|
if (num_found == et_entry->num_slots) {
|
|
start_idx = (map_idx - num_found) + 1;
|
|
found_space = 1;
|
|
}
|
|
} else
|
|
num_found = 0;
|
|
}
|
|
|
|
if (!found_space)
|
|
continue;
|
|
for (map_idx = start_idx; map_idx < (start_idx + num_found);
|
|
map_idx++) {
|
|
enc_entry = sc->enclosure_table;
|
|
for (enc_idx = 0; enc_idx < sc->num_enc_table_entries;
|
|
enc_idx++, enc_entry++) {
|
|
if (map_idx < enc_entry->start_index ||
|
|
map_idx > (enc_entry->start_index +
|
|
enc_entry->num_slots))
|
|
continue;
|
|
if (!enc_entry->removal_flag) {
|
|
enc_entry->removal_flag = 1;
|
|
_mapping_add_to_removal_table(sc, 0,
|
|
enc_entry->dpm_entry_num);
|
|
}
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (mt_entry->device_info &
|
|
MPS_MAP_IN_USE) {
|
|
_mapping_add_to_removal_table(sc,
|
|
mt_entry->dev_handle, 0);
|
|
_mapping_clear_map_entry(mt_entry);
|
|
}
|
|
if (map_idx == (enc_entry->start_index +
|
|
enc_entry->num_slots - 1))
|
|
_mapping_clear_enc_entry(et_entry);
|
|
}
|
|
}
|
|
enc_entry = sc->enclosure_table;
|
|
for (enc_idx = 0; enc_idx < sc->num_enc_table_entries;
|
|
enc_idx++, enc_entry++) {
|
|
if (!enc_entry->removal_flag) {
|
|
mt_entry = &sc->mapping_table[enc_entry->
|
|
start_index];
|
|
for (map_idx = enc_entry->start_index; map_idx <
|
|
(enc_entry->start_index +
|
|
enc_entry->num_slots); map_idx++,
|
|
mt_entry++)
|
|
mt_entry->device_info |=
|
|
MPS_DEV_RESERVED;
|
|
et_entry->skip_search = 0;
|
|
}
|
|
}
|
|
done_flag = 1;
|
|
}
|
|
return start_idx;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_dev_info -get information about newly added devices
|
|
* @sc: per adapter object
|
|
* @topo_change: Topology change event entry
|
|
*
|
|
* Search through the topology change event list and issues sas device pg0
|
|
* requests for the newly added device and reserved entries in tables
|
|
*
|
|
* Returns nothing
|
|
*/
|
|
static void
|
|
_mapping_get_dev_info(struct mps_softc *sc,
|
|
struct _map_topology_change *topo_change)
|
|
{
|
|
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
Mpi2ConfigReply_t mpi_reply;
|
|
Mpi2SasDevicePage0_t sas_device_pg0;
|
|
u8 entry, enc_idx, phy_idx;
|
|
u32 map_idx, index, device_info;
|
|
struct _map_phy_change *phy_change, *tmp_phy_change;
|
|
uint64_t sas_address;
|
|
struct enc_mapping_table *et_entry;
|
|
struct dev_mapping_table *mt_entry;
|
|
u8 add_code = MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED;
|
|
int rc;
|
|
|
|
for (entry = 0; entry < topo_change->num_entries; entry++) {
|
|
phy_change = &topo_change->phy_details[entry];
|
|
if (phy_change->is_processed || !phy_change->dev_handle ||
|
|
phy_change->reason != MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED)
|
|
continue;
|
|
if (mps_config_get_sas_device_pg0(sc, &mpi_reply,
|
|
&sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
|
|
phy_change->dev_handle)) {
|
|
phy_change->is_processed = 1;
|
|
continue;
|
|
}
|
|
|
|
device_info = le32toh(sas_device_pg0.DeviceInfo);
|
|
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) {
|
|
if ((device_info & MPI2_SAS_DEVICE_INFO_END_DEVICE) &&
|
|
(device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)) {
|
|
rc = mpssas_get_sas_address_for_sata_disk(sc,
|
|
&sas_address, phy_change->dev_handle,
|
|
device_info);
|
|
if (rc) {
|
|
printf("%s: failed to compute the "
|
|
"hashed SAS Address for SATA "
|
|
"device with handle 0x%04x\n",
|
|
__func__, phy_change->dev_handle);
|
|
sas_address =
|
|
sas_device_pg0.SASAddress.High;
|
|
sas_address = (sas_address << 32) |
|
|
sas_device_pg0.SASAddress.Low;
|
|
}
|
|
mps_dprint(sc, MPS_INFO, "SAS Address for SATA "
|
|
"device = %jx\n", sas_address);
|
|
} else {
|
|
sas_address =
|
|
sas_device_pg0.SASAddress.High;
|
|
sas_address = (sas_address << 32) |
|
|
sas_device_pg0.SASAddress.Low;
|
|
}
|
|
} else {
|
|
sas_address = sas_device_pg0.SASAddress.High;
|
|
sas_address = (sas_address << 32) |
|
|
sas_device_pg0.SASAddress.Low;
|
|
}
|
|
phy_change->physical_id = sas_address;
|
|
phy_change->slot = le16toh(sas_device_pg0.Slot);
|
|
phy_change->device_info =
|
|
le32toh(sas_device_pg0.DeviceInfo);
|
|
|
|
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
|
|
enc_idx = _mapping_get_enc_idx_from_handle(sc,
|
|
topo_change->enc_handle);
|
|
if (enc_idx == MPS_ENCTABLE_BAD_IDX) {
|
|
phy_change->is_processed = 1;
|
|
printf("%s: failed to add the device with "
|
|
"handle 0x%04x because the enclosure is "
|
|
"not in the mapping table\n", __func__,
|
|
phy_change->dev_handle);
|
|
continue;
|
|
}
|
|
if (!((phy_change->device_info &
|
|
MPI2_SAS_DEVICE_INFO_END_DEVICE) &&
|
|
(phy_change->device_info &
|
|
(MPI2_SAS_DEVICE_INFO_SSP_TARGET |
|
|
MPI2_SAS_DEVICE_INFO_STP_TARGET |
|
|
MPI2_SAS_DEVICE_INFO_SATA_DEVICE)))) {
|
|
phy_change->is_processed = 1;
|
|
continue;
|
|
}
|
|
et_entry = &sc->enclosure_table[enc_idx];
|
|
if (et_entry->start_index != MPS_MAPTABLE_BAD_IDX)
|
|
continue;
|
|
if (!topo_change->exp_handle) {
|
|
map_idx = sc->num_rsvd_entries;
|
|
et_entry->start_index = map_idx;
|
|
} else {
|
|
map_idx = _mapping_find_enc_map_space(sc,
|
|
et_entry);
|
|
et_entry->start_index = map_idx;
|
|
if (et_entry->start_index ==
|
|
MPS_MAPTABLE_BAD_IDX) {
|
|
phy_change->is_processed = 1;
|
|
for (phy_idx = 0; phy_idx <
|
|
topo_change->num_entries;
|
|
phy_idx++) {
|
|
tmp_phy_change =
|
|
&topo_change->phy_details
|
|
[phy_idx];
|
|
if (tmp_phy_change->reason ==
|
|
add_code)
|
|
tmp_phy_change->
|
|
is_processed = 1;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
for (index = map_idx; index < (et_entry->num_slots
|
|
+ map_idx); index++, mt_entry++) {
|
|
mt_entry->device_info = MPS_DEV_RESERVED;
|
|
mt_entry->physical_id = et_entry->enclosure_id;
|
|
mt_entry->phy_bits = et_entry->phy_bits;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* _mapping_set_mid_to_eid -set map table data from enclosure table
|
|
* @sc: per adapter object
|
|
* @et_entry: enclosure entry
|
|
*
|
|
* Returns nothing
|
|
*/
|
|
static inline void
|
|
_mapping_set_mid_to_eid(struct mps_softc *sc,
|
|
struct enc_mapping_table *et_entry)
|
|
{
|
|
struct dev_mapping_table *mt_entry;
|
|
u16 slots = et_entry->num_slots, map_idx;
|
|
u32 start_idx = et_entry->start_index;
|
|
if (start_idx != MPS_MAPTABLE_BAD_IDX) {
|
|
mt_entry = &sc->mapping_table[start_idx];
|
|
for (map_idx = 0; map_idx < slots; map_idx++, mt_entry++)
|
|
mt_entry->physical_id = et_entry->enclosure_id;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* _mapping_clear_removed_entries - mark the entries to be cleared
|
|
* @sc: per adapter object
|
|
*
|
|
* Search through the removal table and mark the entries which needs to be
|
|
* flushed to DPM and also updates the map table and enclosure table by
|
|
* clearing the corresponding entries.
|
|
*
|
|
* Returns nothing
|
|
*/
|
|
static void
|
|
_mapping_clear_removed_entries(struct mps_softc *sc)
|
|
{
|
|
u32 remove_idx;
|
|
struct map_removal_table *remove_entry;
|
|
Mpi2DriverMap0Entry_t *dpm_entry;
|
|
u8 done_flag = 0, num_entries, m, i;
|
|
struct enc_mapping_table *et_entry, *from, *to;
|
|
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
|
|
if (sc->is_dpm_enable) {
|
|
remove_entry = sc->removal_table;
|
|
for (remove_idx = 0; remove_idx < sc->max_devices;
|
|
remove_idx++, remove_entry++) {
|
|
if (remove_entry->dpm_entry_num != MPS_DPM_BAD_IDX) {
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *)
|
|
((u8 *) sc->dpm_pg0 +
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
dpm_entry += remove_entry->dpm_entry_num;
|
|
dpm_entry->PhysicalIdentifier.Low = 0;
|
|
dpm_entry->PhysicalIdentifier.High = 0;
|
|
dpm_entry->DeviceIndex = 0;
|
|
dpm_entry->MappingInformation = 0;
|
|
dpm_entry->PhysicalBitsMapping = 0;
|
|
sc->dpm_flush_entry[remove_entry->
|
|
dpm_entry_num] = 1;
|
|
sc->dpm_entry_used[remove_entry->dpm_entry_num]
|
|
= 0;
|
|
remove_entry->dpm_entry_num = MPS_DPM_BAD_IDX;
|
|
}
|
|
}
|
|
}
|
|
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
|
|
num_entries = sc->num_enc_table_entries;
|
|
while (!done_flag) {
|
|
done_flag = 1;
|
|
et_entry = sc->enclosure_table;
|
|
for (i = 0; i < num_entries; i++, et_entry++) {
|
|
if (!et_entry->enc_handle && et_entry->
|
|
init_complete) {
|
|
done_flag = 0;
|
|
if (i != (num_entries - 1)) {
|
|
from = &sc->enclosure_table
|
|
[i+1];
|
|
to = &sc->enclosure_table[i];
|
|
for (m = i; m < (num_entries -
|
|
1); m++, from++, to++) {
|
|
_mapping_set_mid_to_eid
|
|
(sc, to);
|
|
*to = *from;
|
|
}
|
|
_mapping_clear_enc_entry(to);
|
|
sc->num_enc_table_entries--;
|
|
num_entries =
|
|
sc->num_enc_table_entries;
|
|
} else {
|
|
_mapping_clear_enc_entry
|
|
(et_entry);
|
|
sc->num_enc_table_entries--;
|
|
num_entries =
|
|
sc->num_enc_table_entries;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* _mapping_add_new_device -Add the new device into mapping table
|
|
* @sc: per adapter object
|
|
* @topo_change: Topology change event entry
|
|
*
|
|
* Search through the topology change event list and updates map table,
|
|
* enclosure table and DPM pages for for the newly added devices.
|
|
*
|
|
* Returns nothing
|
|
*/
|
|
static void
|
|
_mapping_add_new_device(struct mps_softc *sc,
|
|
struct _map_topology_change *topo_change)
|
|
{
|
|
u8 enc_idx, missing_cnt, is_removed = 0;
|
|
u16 dpm_idx;
|
|
u32 search_idx, map_idx;
|
|
u32 entry;
|
|
struct dev_mapping_table *mt_entry;
|
|
struct enc_mapping_table *et_entry;
|
|
struct _map_phy_change *phy_change;
|
|
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
Mpi2DriverMap0Entry_t *dpm_entry;
|
|
uint64_t temp64_var;
|
|
u8 map_shift = MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT;
|
|
u8 hdr_sz = sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER);
|
|
u16 max_num_phy_ids = le16toh(sc->ioc_pg8.MaxNumPhysicalMappedIDs);
|
|
|
|
for (entry = 0; entry < topo_change->num_entries; entry++) {
|
|
phy_change = &topo_change->phy_details[entry];
|
|
if (phy_change->is_processed)
|
|
continue;
|
|
if (phy_change->reason != MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED ||
|
|
!phy_change->dev_handle) {
|
|
phy_change->is_processed = 1;
|
|
continue;
|
|
}
|
|
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
|
|
enc_idx = _mapping_get_enc_idx_from_handle
|
|
(sc, topo_change->enc_handle);
|
|
if (enc_idx == MPS_ENCTABLE_BAD_IDX) {
|
|
phy_change->is_processed = 1;
|
|
printf("%s: failed to add the device with "
|
|
"handle 0x%04x because the enclosure is "
|
|
"not in the mapping table\n", __func__,
|
|
phy_change->dev_handle);
|
|
continue;
|
|
}
|
|
et_entry = &sc->enclosure_table[enc_idx];
|
|
if (et_entry->start_index == MPS_MAPTABLE_BAD_IDX) {
|
|
phy_change->is_processed = 1;
|
|
if (!sc->mt_full_retry) {
|
|
sc->mt_add_device_failed = 1;
|
|
continue;
|
|
}
|
|
printf("%s: failed to add the device with "
|
|
"handle 0x%04x because there is no free "
|
|
"space available in the mapping table\n",
|
|
__func__, phy_change->dev_handle);
|
|
continue;
|
|
}
|
|
map_idx = et_entry->start_index + phy_change->slot -
|
|
et_entry->start_slot;
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
mt_entry->physical_id = phy_change->physical_id;
|
|
mt_entry->channel = 0;
|
|
mt_entry->id = map_idx;
|
|
mt_entry->dev_handle = phy_change->dev_handle;
|
|
mt_entry->missing_count = 0;
|
|
mt_entry->dpm_entry_num = et_entry->dpm_entry_num;
|
|
mt_entry->device_info = phy_change->device_info |
|
|
(MPS_DEV_RESERVED | MPS_MAP_IN_USE);
|
|
if (sc->is_dpm_enable) {
|
|
dpm_idx = et_entry->dpm_entry_num;
|
|
if (dpm_idx == MPS_DPM_BAD_IDX)
|
|
dpm_idx = _mapping_get_dpm_idx_from_id
|
|
(sc, et_entry->enclosure_id,
|
|
et_entry->phy_bits);
|
|
if (dpm_idx == MPS_DPM_BAD_IDX) {
|
|
dpm_idx = _mapping_get_free_dpm_idx(sc);
|
|
if (dpm_idx != MPS_DPM_BAD_IDX) {
|
|
dpm_entry =
|
|
(Mpi2DriverMap0Entry_t *)
|
|
((u8 *) sc->dpm_pg0 +
|
|
hdr_sz);
|
|
dpm_entry += dpm_idx;
|
|
dpm_entry->
|
|
PhysicalIdentifier.Low =
|
|
(0xFFFFFFFF &
|
|
et_entry->enclosure_id);
|
|
dpm_entry->
|
|
PhysicalIdentifier.High =
|
|
( et_entry->enclosure_id
|
|
>> 32);
|
|
dpm_entry->DeviceIndex =
|
|
(U16)et_entry->start_index;
|
|
dpm_entry->MappingInformation =
|
|
et_entry->num_slots;
|
|
dpm_entry->MappingInformation
|
|
<<= map_shift;
|
|
dpm_entry->PhysicalBitsMapping
|
|
= et_entry->phy_bits;
|
|
et_entry->dpm_entry_num =
|
|
dpm_idx;
|
|
/* FIXME Do I need to set the dpm_idxin mt_entry too */
|
|
sc->dpm_entry_used[dpm_idx] = 1;
|
|
sc->dpm_flush_entry[dpm_idx] =
|
|
1;
|
|
phy_change->is_processed = 1;
|
|
} else {
|
|
phy_change->is_processed = 1;
|
|
printf("%s: failed to add the "
|
|
"device with handle 0x%04x "
|
|
"to persistent table "
|
|
"because there is no free "
|
|
"space available\n",
|
|
__func__,
|
|
phy_change->dev_handle);
|
|
}
|
|
} else {
|
|
et_entry->dpm_entry_num = dpm_idx;
|
|
mt_entry->dpm_entry_num = dpm_idx;
|
|
}
|
|
}
|
|
/* FIXME Why not mt_entry too? */
|
|
et_entry->init_complete = 1;
|
|
} else if ((ioc_pg8_flags &
|
|
MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) {
|
|
map_idx = _mapping_get_mt_idx_from_id
|
|
(sc, phy_change->physical_id);
|
|
if (map_idx == MPS_MAPTABLE_BAD_IDX) {
|
|
search_idx = sc->num_rsvd_entries;
|
|
if (topo_change->exp_handle)
|
|
search_idx += max_num_phy_ids;
|
|
map_idx = _mapping_get_free_mt_idx(sc,
|
|
search_idx);
|
|
}
|
|
if (map_idx == MPS_MAPTABLE_BAD_IDX) {
|
|
map_idx = _mapping_get_high_missing_mt_idx(sc);
|
|
if (map_idx != MPS_MAPTABLE_BAD_IDX) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (mt_entry->dev_handle) {
|
|
_mapping_add_to_removal_table
|
|
(sc, mt_entry->dev_handle,
|
|
0);
|
|
is_removed = 1;
|
|
}
|
|
mt_entry->init_complete = 0;
|
|
}
|
|
}
|
|
if (map_idx != MPS_MAPTABLE_BAD_IDX) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
mt_entry->physical_id = phy_change->physical_id;
|
|
mt_entry->channel = 0;
|
|
mt_entry->id = map_idx;
|
|
mt_entry->dev_handle = phy_change->dev_handle;
|
|
mt_entry->missing_count = 0;
|
|
mt_entry->device_info = phy_change->device_info
|
|
| (MPS_DEV_RESERVED | MPS_MAP_IN_USE);
|
|
} else {
|
|
phy_change->is_processed = 1;
|
|
if (!sc->mt_full_retry) {
|
|
sc->mt_add_device_failed = 1;
|
|
continue;
|
|
}
|
|
printf("%s: failed to add the device with "
|
|
"handle 0x%04x because there is no free "
|
|
"space available in the mapping table\n",
|
|
__func__, phy_change->dev_handle);
|
|
continue;
|
|
}
|
|
if (sc->is_dpm_enable) {
|
|
if (mt_entry->dpm_entry_num !=
|
|
MPS_DPM_BAD_IDX) {
|
|
dpm_idx = mt_entry->dpm_entry_num;
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *)
|
|
((u8 *)sc->dpm_pg0 + hdr_sz);
|
|
dpm_entry += dpm_idx;
|
|
missing_cnt = dpm_entry->
|
|
MappingInformation &
|
|
MPI2_DRVMAP0_MAPINFO_MISSING_MASK;
|
|
temp64_var = dpm_entry->
|
|
PhysicalIdentifier.High;
|
|
temp64_var = (temp64_var << 32) |
|
|
dpm_entry->PhysicalIdentifier.Low;
|
|
if ((mt_entry->physical_id ==
|
|
temp64_var) && !missing_cnt)
|
|
mt_entry->init_complete = 1;
|
|
} else {
|
|
dpm_idx = _mapping_get_free_dpm_idx(sc);
|
|
mt_entry->init_complete = 0;
|
|
}
|
|
if (dpm_idx != MPS_DPM_BAD_IDX &&
|
|
!mt_entry->init_complete) {
|
|
mt_entry->init_complete = 1;
|
|
mt_entry->dpm_entry_num = dpm_idx;
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *)
|
|
((u8 *)sc->dpm_pg0 + hdr_sz);
|
|
dpm_entry += dpm_idx;
|
|
dpm_entry->PhysicalIdentifier.Low =
|
|
(0xFFFFFFFF &
|
|
mt_entry->physical_id);
|
|
dpm_entry->PhysicalIdentifier.High =
|
|
(mt_entry->physical_id >> 32);
|
|
dpm_entry->DeviceIndex = (U16) map_idx;
|
|
dpm_entry->MappingInformation = 0;
|
|
dpm_entry->PhysicalBitsMapping = 0;
|
|
sc->dpm_entry_used[dpm_idx] = 1;
|
|
sc->dpm_flush_entry[dpm_idx] = 1;
|
|
phy_change->is_processed = 1;
|
|
} else if (dpm_idx == MPS_DPM_BAD_IDX) {
|
|
phy_change->is_processed = 1;
|
|
printf("%s: failed to add the "
|
|
"device with handle 0x%04x "
|
|
"to persistent table "
|
|
"because there is no free "
|
|
"space available\n",
|
|
__func__,
|
|
phy_change->dev_handle);
|
|
}
|
|
}
|
|
mt_entry->init_complete = 1;
|
|
}
|
|
|
|
phy_change->is_processed = 1;
|
|
}
|
|
if (is_removed)
|
|
_mapping_clear_removed_entries(sc);
|
|
}
|
|
|
|
/**
|
|
* _mapping_flush_dpm_pages -Flush the DPM pages to NVRAM
|
|
* @sc: per adapter object
|
|
*
|
|
* Returns nothing
|
|
*/
|
|
static void
|
|
_mapping_flush_dpm_pages(struct mps_softc *sc)
|
|
{
|
|
Mpi2DriverMap0Entry_t *dpm_entry;
|
|
Mpi2ConfigReply_t mpi_reply;
|
|
Mpi2DriverMappingPage0_t config_page;
|
|
u16 entry_num;
|
|
|
|
for (entry_num = 0; entry_num < sc->max_dpm_entries; entry_num++) {
|
|
if (!sc->dpm_flush_entry[entry_num])
|
|
continue;
|
|
memset(&config_page, 0, sizeof(Mpi2DriverMappingPage0_t));
|
|
memcpy(&config_page.Header, (u8 *)sc->dpm_pg0,
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *) ((u8 *)sc->dpm_pg0 +
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
dpm_entry += entry_num;
|
|
dpm_entry->MappingInformation = htole16(dpm_entry->
|
|
MappingInformation);
|
|
dpm_entry->DeviceIndex = htole16(dpm_entry->DeviceIndex);
|
|
dpm_entry->PhysicalBitsMapping = htole32(dpm_entry->
|
|
PhysicalBitsMapping);
|
|
memcpy(&config_page.Entry, (u8 *)dpm_entry,
|
|
sizeof(Mpi2DriverMap0Entry_t));
|
|
/* TODO-How to handle failed writes? */
|
|
if (mps_config_set_dpm_pg0(sc, &mpi_reply, &config_page,
|
|
entry_num)) {
|
|
printf("%s: write of dpm entry %d for device failed\n",
|
|
__func__, entry_num);
|
|
} else
|
|
sc->dpm_flush_entry[entry_num] = 0;
|
|
dpm_entry->MappingInformation = le16toh(dpm_entry->
|
|
MappingInformation);
|
|
dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex);
|
|
dpm_entry->PhysicalBitsMapping = le32toh(dpm_entry->
|
|
PhysicalBitsMapping);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* _mapping_allocate_memory- allocates the memory required for mapping tables
|
|
* @sc: per adapter object
|
|
*
|
|
* Allocates the memory for all the tables required for host mapping
|
|
*
|
|
* Return 0 on success or non-zero on failure.
|
|
*/
|
|
int
|
|
mps_mapping_allocate_memory(struct mps_softc *sc)
|
|
{
|
|
uint32_t dpm_pg0_sz;
|
|
|
|
sc->mapping_table = malloc((sizeof(struct dev_mapping_table) *
|
|
sc->max_devices), M_MPT2, M_ZERO|M_NOWAIT);
|
|
if (!sc->mapping_table)
|
|
goto free_resources;
|
|
|
|
sc->removal_table = malloc((sizeof(struct map_removal_table) *
|
|
sc->max_devices), M_MPT2, M_ZERO|M_NOWAIT);
|
|
if (!sc->removal_table)
|
|
goto free_resources;
|
|
|
|
sc->enclosure_table = malloc((sizeof(struct enc_mapping_table) *
|
|
sc->max_enclosures), M_MPT2, M_ZERO|M_NOWAIT);
|
|
if (!sc->enclosure_table)
|
|
goto free_resources;
|
|
|
|
sc->dpm_entry_used = malloc((sizeof(u8) * sc->max_dpm_entries),
|
|
M_MPT2, M_ZERO|M_NOWAIT);
|
|
if (!sc->dpm_entry_used)
|
|
goto free_resources;
|
|
|
|
sc->dpm_flush_entry = malloc((sizeof(u8) * sc->max_dpm_entries),
|
|
M_MPT2, M_ZERO|M_NOWAIT);
|
|
if (!sc->dpm_flush_entry)
|
|
goto free_resources;
|
|
|
|
dpm_pg0_sz = sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER) +
|
|
(sc->max_dpm_entries * sizeof(MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY));
|
|
|
|
sc->dpm_pg0 = malloc(dpm_pg0_sz, M_MPT2, M_ZERO|M_NOWAIT);
|
|
if (!sc->dpm_pg0) {
|
|
printf("%s: memory alloc failed for dpm page; disabling dpm\n",
|
|
__func__);
|
|
sc->is_dpm_enable = 0;
|
|
}
|
|
|
|
return 0;
|
|
|
|
free_resources:
|
|
free(sc->mapping_table, M_MPT2);
|
|
free(sc->removal_table, M_MPT2);
|
|
free(sc->enclosure_table, M_MPT2);
|
|
free(sc->dpm_entry_used, M_MPT2);
|
|
free(sc->dpm_flush_entry, M_MPT2);
|
|
free(sc->dpm_pg0, M_MPT2);
|
|
printf("%s: device initialization failed due to failure in mapping "
|
|
"table memory allocation\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
/**
|
|
* mps_mapping_free_memory- frees the memory allocated for mapping tables
|
|
* @sc: per adapter object
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
void
|
|
mps_mapping_free_memory(struct mps_softc *sc)
|
|
{
|
|
free(sc->mapping_table, M_MPT2);
|
|
free(sc->removal_table, M_MPT2);
|
|
free(sc->enclosure_table, M_MPT2);
|
|
free(sc->dpm_entry_used, M_MPT2);
|
|
free(sc->dpm_flush_entry, M_MPT2);
|
|
free(sc->dpm_pg0, M_MPT2);
|
|
}
|
|
|
|
|
|
static void
|
|
_mapping_process_dpm_pg0(struct mps_softc *sc)
|
|
{
|
|
u8 missing_cnt, enc_idx;
|
|
u16 slot_id, entry_num, num_slots;
|
|
u32 map_idx, dev_idx, start_idx, end_idx;
|
|
struct dev_mapping_table *mt_entry;
|
|
Mpi2DriverMap0Entry_t *dpm_entry;
|
|
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
u16 max_num_phy_ids = le16toh(sc->ioc_pg8.MaxNumPhysicalMappedIDs);
|
|
struct enc_mapping_table *et_entry;
|
|
u64 physical_id;
|
|
u32 phy_bits = 0;
|
|
|
|
if (sc->ir_firmware)
|
|
_mapping_get_ir_maprange(sc, &start_idx, &end_idx);
|
|
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *) ((uint8_t *) sc->dpm_pg0 +
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
for (entry_num = 0; entry_num < sc->max_dpm_entries; entry_num++,
|
|
dpm_entry++) {
|
|
physical_id = dpm_entry->PhysicalIdentifier.High;
|
|
physical_id = (physical_id << 32) |
|
|
dpm_entry->PhysicalIdentifier.Low;
|
|
if (!physical_id) {
|
|
sc->dpm_entry_used[entry_num] = 0;
|
|
continue;
|
|
}
|
|
sc->dpm_entry_used[entry_num] = 1;
|
|
dpm_entry->MappingInformation = le16toh(dpm_entry->
|
|
MappingInformation);
|
|
missing_cnt = dpm_entry->MappingInformation &
|
|
MPI2_DRVMAP0_MAPINFO_MISSING_MASK;
|
|
dev_idx = le16toh(dpm_entry->DeviceIndex);
|
|
phy_bits = le32toh(dpm_entry->PhysicalBitsMapping);
|
|
if (sc->ir_firmware && (dev_idx >= start_idx) &&
|
|
(dev_idx <= end_idx)) {
|
|
mt_entry = &sc->mapping_table[dev_idx];
|
|
mt_entry->physical_id = dpm_entry->PhysicalIdentifier.High;
|
|
mt_entry->physical_id = (mt_entry->physical_id << 32) |
|
|
dpm_entry->PhysicalIdentifier.Low;
|
|
mt_entry->channel = MPS_RAID_CHANNEL;
|
|
mt_entry->id = dev_idx;
|
|
mt_entry->missing_count = missing_cnt;
|
|
mt_entry->dpm_entry_num = entry_num;
|
|
mt_entry->device_info = MPS_DEV_RESERVED;
|
|
continue;
|
|
}
|
|
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
|
|
if (dev_idx < (sc->num_rsvd_entries +
|
|
max_num_phy_ids)) {
|
|
slot_id = 0;
|
|
if (ioc_pg8_flags &
|
|
MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1)
|
|
slot_id = 1;
|
|
num_slots = max_num_phy_ids;
|
|
} else {
|
|
slot_id = 0;
|
|
num_slots = dpm_entry->MappingInformation &
|
|
MPI2_DRVMAP0_MAPINFO_SLOT_MASK;
|
|
num_slots >>= MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT;
|
|
}
|
|
enc_idx = sc->num_enc_table_entries;
|
|
if (enc_idx >= sc->max_enclosures) {
|
|
printf("%s: enclosure entries exceed max "
|
|
"enclosures of %d\n", __func__,
|
|
sc->max_enclosures);
|
|
break;
|
|
}
|
|
sc->num_enc_table_entries++;
|
|
et_entry = &sc->enclosure_table[enc_idx];
|
|
physical_id = dpm_entry->PhysicalIdentifier.High;
|
|
et_entry->enclosure_id = (physical_id << 32) |
|
|
dpm_entry->PhysicalIdentifier.Low;
|
|
et_entry->start_index = dev_idx;
|
|
et_entry->dpm_entry_num = entry_num;
|
|
et_entry->num_slots = num_slots;
|
|
et_entry->start_slot = slot_id;
|
|
et_entry->missing_count = missing_cnt;
|
|
et_entry->phy_bits = phy_bits;
|
|
|
|
mt_entry = &sc->mapping_table[dev_idx];
|
|
for (map_idx = dev_idx; map_idx < (dev_idx + num_slots);
|
|
map_idx++, mt_entry++) {
|
|
if (mt_entry->dpm_entry_num !=
|
|
MPS_DPM_BAD_IDX) {
|
|
printf("%s: conflict in mapping table "
|
|
"for enclosure %d\n", __func__,
|
|
enc_idx);
|
|
break;
|
|
}
|
|
physical_id = dpm_entry->PhysicalIdentifier.High;
|
|
mt_entry->physical_id = (physical_id << 32) |
|
|
dpm_entry->PhysicalIdentifier.Low;
|
|
mt_entry->phy_bits = phy_bits;
|
|
mt_entry->channel = 0;
|
|
mt_entry->id = dev_idx;
|
|
mt_entry->dpm_entry_num = entry_num;
|
|
mt_entry->missing_count = missing_cnt;
|
|
mt_entry->device_info = MPS_DEV_RESERVED;
|
|
}
|
|
} else if ((ioc_pg8_flags &
|
|
MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) {
|
|
map_idx = dev_idx;
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (mt_entry->dpm_entry_num != MPS_DPM_BAD_IDX) {
|
|
printf("%s: conflict in mapping table for "
|
|
"device %d\n", __func__, map_idx);
|
|
break;
|
|
}
|
|
physical_id = dpm_entry->PhysicalIdentifier.High;
|
|
mt_entry->physical_id = (physical_id << 32) |
|
|
dpm_entry->PhysicalIdentifier.Low;
|
|
mt_entry->phy_bits = phy_bits;
|
|
mt_entry->channel = 0;
|
|
mt_entry->id = dev_idx;
|
|
mt_entry->missing_count = missing_cnt;
|
|
mt_entry->dpm_entry_num = entry_num;
|
|
mt_entry->device_info = MPS_DEV_RESERVED;
|
|
}
|
|
} /*close the loop for DPM table */
|
|
}
|
|
|
|
/*
|
|
* mps_mapping_check_devices - start of the day check for device availabilty
|
|
* @sc: per adapter object
|
|
* @sleep_flag: Flag indicating whether this function can sleep or not
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
void
|
|
mps_mapping_check_devices(struct mps_softc *sc, int sleep_flag)
|
|
{
|
|
u32 i;
|
|
/* u32 cntdn, i;
|
|
u32 timeout = 60;*/
|
|
struct dev_mapping_table *mt_entry;
|
|
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
struct enc_mapping_table *et_entry;
|
|
u32 start_idx, end_idx;
|
|
|
|
/* We need to ucomment this when this function is called
|
|
* from the port enable complete */
|
|
#if 0
|
|
sc->track_mapping_events = 0;
|
|
cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
|
|
do {
|
|
if (!sc->pending_map_events)
|
|
break;
|
|
if (sleep_flag == CAN_SLEEP)
|
|
pause("mps_pause", (hz/1000));/* 1msec sleep */
|
|
else
|
|
DELAY(500); /* 500 useconds delay */
|
|
} while (--cntdn);
|
|
|
|
|
|
if (!cntdn)
|
|
printf("%s: there are %d"
|
|
" pending events after %d seconds of delay\n",
|
|
__func__, sc->pending_map_events, timeout);
|
|
#endif
|
|
sc->pending_map_events = 0;
|
|
|
|
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
|
|
et_entry = sc->enclosure_table;
|
|
for (i = 0; i < sc->num_enc_table_entries; i++, et_entry++) {
|
|
if (!et_entry->init_complete) {
|
|
if (et_entry->missing_count <
|
|
MPS_MAX_MISSING_COUNT) {
|
|
et_entry->missing_count++;
|
|
if (et_entry->dpm_entry_num !=
|
|
MPS_DPM_BAD_IDX)
|
|
_mapping_commit_enc_entry(sc,
|
|
et_entry);
|
|
}
|
|
et_entry->init_complete = 1;
|
|
}
|
|
}
|
|
if (!sc->ir_firmware)
|
|
return;
|
|
_mapping_get_ir_maprange(sc, &start_idx, &end_idx);
|
|
mt_entry = &sc->mapping_table[start_idx];
|
|
for (i = start_idx; i < (end_idx + 1); i++, mt_entry++) {
|
|
if (mt_entry->device_info & MPS_DEV_RESERVED
|
|
&& !mt_entry->physical_id)
|
|
mt_entry->init_complete = 1;
|
|
else if (mt_entry->device_info & MPS_DEV_RESERVED) {
|
|
if (!mt_entry->init_complete) {
|
|
if (mt_entry->missing_count <
|
|
MPS_MAX_MISSING_COUNT) {
|
|
mt_entry->missing_count++;
|
|
if (mt_entry->dpm_entry_num !=
|
|
MPS_DPM_BAD_IDX)
|
|
_mapping_commit_map_entry(sc,
|
|
mt_entry);
|
|
}
|
|
mt_entry->init_complete = 1;
|
|
}
|
|
}
|
|
}
|
|
} else if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) {
|
|
mt_entry = sc->mapping_table;
|
|
for (i = 0; i < sc->max_devices; i++, mt_entry++) {
|
|
if (mt_entry->device_info & MPS_DEV_RESERVED
|
|
&& !mt_entry->physical_id)
|
|
mt_entry->init_complete = 1;
|
|
else if (mt_entry->device_info & MPS_DEV_RESERVED) {
|
|
if (!mt_entry->init_complete) {
|
|
if (mt_entry->missing_count <
|
|
MPS_MAX_MISSING_COUNT) {
|
|
mt_entry->missing_count++;
|
|
if (mt_entry->dpm_entry_num !=
|
|
MPS_DPM_BAD_IDX)
|
|
_mapping_commit_map_entry(sc,
|
|
mt_entry);
|
|
}
|
|
mt_entry->init_complete = 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* mps_mapping_is_reinit_required - check whether event replay required
|
|
* @sc: per adapter object
|
|
*
|
|
* Checks the per ioc flags and decide whether reinit of events required
|
|
*
|
|
* Returns 1 for reinit of ioc 0 for not.
|
|
*/
|
|
int mps_mapping_is_reinit_required(struct mps_softc *sc)
|
|
{
|
|
if (!sc->mt_full_retry && sc->mt_add_device_failed) {
|
|
sc->mt_full_retry = 1;
|
|
sc->mt_add_device_failed = 0;
|
|
_mapping_flush_dpm_pages(sc);
|
|
return 1;
|
|
}
|
|
sc->mt_full_retry = 1;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* mps_mapping_initialize - initialize mapping tables
|
|
* @sc: per adapter object
|
|
*
|
|
* Read controller persitant mapping tables into internal data area.
|
|
*
|
|
* Return 0 for success or non-zero for failure.
|
|
*/
|
|
int
|
|
mps_mapping_initialize(struct mps_softc *sc)
|
|
{
|
|
uint16_t volume_mapping_flags, dpm_pg0_sz;
|
|
uint32_t i;
|
|
Mpi2ConfigReply_t mpi_reply;
|
|
int error;
|
|
uint8_t retry_count;
|
|
uint16_t ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
|
|
/* The additional 1 accounts for the virtual enclosure
|
|
* created for the controller
|
|
*/
|
|
sc->max_enclosures = sc->facts->MaxEnclosures + 1;
|
|
sc->max_expanders = sc->facts->MaxSasExpanders;
|
|
sc->max_volumes = sc->facts->MaxVolumes;
|
|
sc->max_devices = sc->facts->MaxTargets + sc->max_volumes;
|
|
sc->pending_map_events = 0;
|
|
sc->num_enc_table_entries = 0;
|
|
sc->num_rsvd_entries = 0;
|
|
sc->num_channels = 1;
|
|
sc->max_dpm_entries = sc->ioc_pg8.MaxPersistentEntries;
|
|
sc->is_dpm_enable = (sc->max_dpm_entries) ? 1 : 0;
|
|
sc->track_mapping_events = 0;
|
|
|
|
if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING)
|
|
sc->is_dpm_enable = 0;
|
|
|
|
if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0)
|
|
sc->num_rsvd_entries = 1;
|
|
|
|
volume_mapping_flags = sc->ioc_pg8.IRVolumeMappingFlags &
|
|
MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
|
|
if (sc->ir_firmware && (volume_mapping_flags ==
|
|
MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING))
|
|
sc->num_rsvd_entries += sc->max_volumes;
|
|
|
|
error = mps_mapping_allocate_memory(sc);
|
|
if (error)
|
|
return (error);
|
|
|
|
for (i = 0; i < sc->max_devices; i++)
|
|
_mapping_clear_map_entry(sc->mapping_table + i);
|
|
|
|
for (i = 0; i < sc->max_enclosures; i++)
|
|
_mapping_clear_enc_entry(sc->enclosure_table + i);
|
|
|
|
for (i = 0; i < sc->max_devices; i++) {
|
|
sc->removal_table[i].dev_handle = 0;
|
|
sc->removal_table[i].dpm_entry_num = MPS_DPM_BAD_IDX;
|
|
}
|
|
|
|
memset(sc->dpm_entry_used, 0, sc->max_dpm_entries);
|
|
memset(sc->dpm_flush_entry, 0, sc->max_dpm_entries);
|
|
|
|
if (sc->is_dpm_enable) {
|
|
dpm_pg0_sz = sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER) +
|
|
(sc->max_dpm_entries *
|
|
sizeof(MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY));
|
|
retry_count = 0;
|
|
|
|
retry_read_dpm:
|
|
if (mps_config_get_dpm_pg0(sc, &mpi_reply, sc->dpm_pg0,
|
|
dpm_pg0_sz)) {
|
|
printf("%s: dpm page read failed; disabling dpm\n",
|
|
__func__);
|
|
if (retry_count < 3) {
|
|
retry_count++;
|
|
goto retry_read_dpm;
|
|
}
|
|
sc->is_dpm_enable = 0;
|
|
}
|
|
}
|
|
|
|
if (sc->is_dpm_enable)
|
|
_mapping_process_dpm_pg0(sc);
|
|
|
|
sc->track_mapping_events = 1;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* mps_mapping_exit - clear mapping table and associated memory
|
|
* @sc: per adapter object
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
void
|
|
mps_mapping_exit(struct mps_softc *sc)
|
|
{
|
|
_mapping_flush_dpm_pages(sc);
|
|
mps_mapping_free_memory(sc);
|
|
}
|
|
|
|
/**
|
|
* mps_mapping_get_sas_id - assign a target id for sas device
|
|
* @sc: per adapter object
|
|
* @sas_address: sas address of the device
|
|
* @handle: device handle
|
|
*
|
|
* Returns valid ID on success or BAD_ID.
|
|
*/
|
|
unsigned int
|
|
mps_mapping_get_sas_id(struct mps_softc *sc, uint64_t sas_address, u16 handle)
|
|
{
|
|
u32 map_idx;
|
|
struct dev_mapping_table *mt_entry;
|
|
|
|
for (map_idx = 0; map_idx < sc->max_devices; map_idx++) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (mt_entry->dev_handle == handle && mt_entry->physical_id ==
|
|
sas_address)
|
|
return mt_entry->id;
|
|
}
|
|
|
|
return MPS_MAP_BAD_ID;
|
|
}
|
|
|
|
/**
|
|
* mps_mapping_get_sas_id_from_handle - find a target id in mapping table using
|
|
* only the dev handle. This is just a wrapper function for the local function
|
|
* _mapping_get_mt_idx_from_handle.
|
|
* @sc: per adapter object
|
|
* @handle: device handle
|
|
*
|
|
* Returns valid ID on success or BAD_ID.
|
|
*/
|
|
unsigned int
|
|
mps_mapping_get_sas_id_from_handle(struct mps_softc *sc, u16 handle)
|
|
{
|
|
return (_mapping_get_mt_idx_from_handle(sc, handle));
|
|
}
|
|
|
|
/**
|
|
* mps_mapping_get_raid_id - assign a target id for raid device
|
|
* @sc: per adapter object
|
|
* @wwid: world wide identifier for raid volume
|
|
* @handle: device handle
|
|
*
|
|
* Returns valid ID on success or BAD_ID.
|
|
*/
|
|
unsigned int
|
|
mps_mapping_get_raid_id(struct mps_softc *sc, u64 wwid, u16 handle)
|
|
{
|
|
u32 map_idx;
|
|
struct dev_mapping_table *mt_entry;
|
|
|
|
for (map_idx = 0; map_idx < sc->max_devices; map_idx++) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (mt_entry->dev_handle == handle && mt_entry->physical_id ==
|
|
wwid)
|
|
return mt_entry->id;
|
|
}
|
|
|
|
return MPS_MAP_BAD_ID;
|
|
}
|
|
|
|
/**
|
|
* mps_mapping_get_raid_id_from_handle - find raid device in mapping table
|
|
* using only the volume dev handle. This is just a wrapper function for the
|
|
* local function _mapping_get_ir_mt_idx_from_handle.
|
|
* @sc: per adapter object
|
|
* @volHandle: volume device handle
|
|
*
|
|
* Returns valid ID on success or BAD_ID.
|
|
*/
|
|
unsigned int
|
|
mps_mapping_get_raid_id_from_handle(struct mps_softc *sc, u16 volHandle)
|
|
{
|
|
return (_mapping_get_ir_mt_idx_from_handle(sc, volHandle));
|
|
}
|
|
|
|
/**
|
|
* mps_mapping_enclosure_dev_status_change_event - handle enclosure events
|
|
* @sc: per adapter object
|
|
* @event_data: event data payload
|
|
*
|
|
* Return nothing.
|
|
*/
|
|
void
|
|
mps_mapping_enclosure_dev_status_change_event(struct mps_softc *sc,
|
|
Mpi2EventDataSasEnclDevStatusChange_t *event_data)
|
|
{
|
|
u8 enc_idx, missing_count;
|
|
struct enc_mapping_table *et_entry;
|
|
Mpi2DriverMap0Entry_t *dpm_entry;
|
|
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
u8 map_shift = MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT;
|
|
u8 update_phy_bits = 0;
|
|
u32 saved_phy_bits;
|
|
uint64_t temp64_var;
|
|
|
|
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) !=
|
|
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING)
|
|
goto out;
|
|
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 +
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
|
|
if (event_data->ReasonCode == MPI2_EVENT_SAS_ENCL_RC_ADDED) {
|
|
if (!event_data->NumSlots) {
|
|
printf("%s: enclosure with handle = 0x%x reported 0 "
|
|
"slots\n", __func__,
|
|
le16toh(event_data->EnclosureHandle));
|
|
goto out;
|
|
}
|
|
temp64_var = event_data->EnclosureLogicalID.High;
|
|
temp64_var = (temp64_var << 32) |
|
|
event_data->EnclosureLogicalID.Low;
|
|
enc_idx = _mapping_get_enc_idx_from_id(sc, temp64_var,
|
|
event_data->PhyBits);
|
|
if (enc_idx != MPS_ENCTABLE_BAD_IDX) {
|
|
et_entry = &sc->enclosure_table[enc_idx];
|
|
if (et_entry->init_complete &&
|
|
!et_entry->missing_count) {
|
|
printf("%s: enclosure %d is already present "
|
|
"with handle = 0x%x\n",__func__, enc_idx,
|
|
et_entry->enc_handle);
|
|
goto out;
|
|
}
|
|
et_entry->enc_handle = le16toh(event_data->
|
|
EnclosureHandle);
|
|
et_entry->start_slot = le16toh(event_data->StartSlot);
|
|
saved_phy_bits = et_entry->phy_bits;
|
|
et_entry->phy_bits |= le32toh(event_data->PhyBits);
|
|
if (saved_phy_bits != et_entry->phy_bits)
|
|
update_phy_bits = 1;
|
|
if (et_entry->missing_count || update_phy_bits) {
|
|
et_entry->missing_count = 0;
|
|
if (sc->is_dpm_enable &&
|
|
et_entry->dpm_entry_num !=
|
|
MPS_DPM_BAD_IDX) {
|
|
dpm_entry += et_entry->dpm_entry_num;
|
|
missing_count =
|
|
(u8)(dpm_entry->MappingInformation &
|
|
MPI2_DRVMAP0_MAPINFO_MISSING_MASK);
|
|
if (!et_entry->init_complete && (
|
|
missing_count || update_phy_bits)) {
|
|
dpm_entry->MappingInformation
|
|
= et_entry->num_slots;
|
|
dpm_entry->MappingInformation
|
|
<<= map_shift;
|
|
dpm_entry->PhysicalBitsMapping
|
|
= et_entry->phy_bits;
|
|
sc->dpm_flush_entry[et_entry->
|
|
dpm_entry_num] = 1;
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
enc_idx = sc->num_enc_table_entries;
|
|
if (enc_idx >= sc->max_enclosures) {
|
|
printf("%s: enclosure can not be added; "
|
|
"mapping table is full\n", __func__);
|
|
goto out;
|
|
}
|
|
sc->num_enc_table_entries++;
|
|
et_entry = &sc->enclosure_table[enc_idx];
|
|
et_entry->enc_handle = le16toh(event_data->
|
|
EnclosureHandle);
|
|
et_entry->enclosure_id = event_data->
|
|
EnclosureLogicalID.High;
|
|
et_entry->enclosure_id = ( et_entry->enclosure_id <<
|
|
32) | event_data->EnclosureLogicalID.Low;
|
|
et_entry->start_index = MPS_MAPTABLE_BAD_IDX;
|
|
et_entry->dpm_entry_num = MPS_DPM_BAD_IDX;
|
|
et_entry->num_slots = le16toh(event_data->NumSlots);
|
|
et_entry->start_slot = le16toh(event_data->StartSlot);
|
|
et_entry->phy_bits = le32toh(event_data->PhyBits);
|
|
}
|
|
et_entry->init_complete = 1;
|
|
} else if (event_data->ReasonCode ==
|
|
MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING) {
|
|
enc_idx = _mapping_get_enc_idx_from_handle(sc,
|
|
le16toh(event_data->EnclosureHandle));
|
|
if (enc_idx == MPS_ENCTABLE_BAD_IDX) {
|
|
printf("%s: cannot unmap enclosure %d because it has "
|
|
"already been deleted", __func__, enc_idx);
|
|
goto out;
|
|
}
|
|
et_entry = &sc->enclosure_table[enc_idx];
|
|
if (!et_entry->init_complete) {
|
|
if (et_entry->missing_count < MPS_MAX_MISSING_COUNT)
|
|
et_entry->missing_count++;
|
|
else
|
|
et_entry->init_complete = 1;
|
|
}
|
|
if (!et_entry->missing_count)
|
|
et_entry->missing_count++;
|
|
if (sc->is_dpm_enable && !et_entry->init_complete &&
|
|
et_entry->dpm_entry_num != MPS_DPM_BAD_IDX) {
|
|
dpm_entry += et_entry->dpm_entry_num;
|
|
dpm_entry->MappingInformation = et_entry->num_slots;
|
|
dpm_entry->MappingInformation <<= map_shift;
|
|
dpm_entry->MappingInformation |=
|
|
et_entry->missing_count;
|
|
sc->dpm_flush_entry[et_entry->dpm_entry_num] = 1;
|
|
}
|
|
et_entry->init_complete = 1;
|
|
}
|
|
|
|
out:
|
|
_mapping_flush_dpm_pages(sc);
|
|
if (sc->pending_map_events)
|
|
sc->pending_map_events--;
|
|
}
|
|
|
|
/**
|
|
* mps_mapping_topology_change_event - handle topology change events
|
|
* @sc: per adapter object
|
|
* @event_data: event data payload
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
void
|
|
mps_mapping_topology_change_event(struct mps_softc *sc,
|
|
Mpi2EventDataSasTopologyChangeList_t *event_data)
|
|
{
|
|
struct _map_topology_change topo_change;
|
|
struct _map_phy_change *phy_change;
|
|
Mpi2EventSasTopoPhyEntry_t *event_phy_change;
|
|
u8 i, num_entries;
|
|
|
|
topo_change.enc_handle = le16toh(event_data->EnclosureHandle);
|
|
topo_change.exp_handle = le16toh(event_data->ExpanderDevHandle);
|
|
num_entries = event_data->NumEntries;
|
|
topo_change.num_entries = num_entries;
|
|
topo_change.start_phy_num = event_data->StartPhyNum;
|
|
topo_change.num_phys = event_data->NumPhys;
|
|
topo_change.exp_status = event_data->ExpStatus;
|
|
event_phy_change = event_data->PHY;
|
|
topo_change.phy_details = NULL;
|
|
|
|
if (!num_entries)
|
|
goto out;
|
|
phy_change = malloc(sizeof(struct _map_phy_change) * num_entries,
|
|
M_MPT2, M_NOWAIT|M_ZERO);
|
|
topo_change.phy_details = phy_change;
|
|
if (!phy_change)
|
|
goto out;
|
|
for (i = 0; i < num_entries; i++, event_phy_change++, phy_change++) {
|
|
phy_change->dev_handle = le16toh(event_phy_change->
|
|
AttachedDevHandle);
|
|
phy_change->reason = event_phy_change->PhyStatus &
|
|
MPI2_EVENT_SAS_TOPO_RC_MASK;
|
|
}
|
|
_mapping_update_missing_count(sc, &topo_change);
|
|
_mapping_get_dev_info(sc, &topo_change);
|
|
_mapping_clear_removed_entries(sc);
|
|
_mapping_add_new_device(sc, &topo_change);
|
|
|
|
out:
|
|
free(topo_change.phy_details, M_MPT2);
|
|
_mapping_flush_dpm_pages(sc);
|
|
if (sc->pending_map_events)
|
|
sc->pending_map_events--;
|
|
}
|
|
|
|
/**
|
|
* _mapping_check_update_ir_mt_idx - Check and update IR map table index
|
|
* @sc: per adapter object
|
|
* @event_data: event data payload
|
|
* @evt_idx: current event index
|
|
* @map_idx: current index and the place holder for new map table index
|
|
* @wwid_table: world wide name for volumes in the element table
|
|
*
|
|
* pass through IR events and find whether any events matches and if so
|
|
* tries to find new index if not returns failure
|
|
*
|
|
* Returns 0 on success and 1 on failure
|
|
*/
|
|
static int
|
|
_mapping_check_update_ir_mt_idx(struct mps_softc *sc,
|
|
Mpi2EventDataIrConfigChangeList_t *event_data, int evt_idx, u32 *map_idx,
|
|
u64 *wwid_table)
|
|
{
|
|
struct dev_mapping_table *mt_entry;
|
|
u32 st_idx, end_idx, mt_idx = *map_idx;
|
|
u8 match = 0;
|
|
Mpi2EventIrConfigElement_t *element;
|
|
u16 element_flags;
|
|
int i;
|
|
|
|
mt_entry = &sc->mapping_table[mt_idx];
|
|
_mapping_get_ir_maprange(sc, &st_idx, &end_idx);
|
|
search_again:
|
|
match = 0;
|
|
for (i = evt_idx + 1; i < event_data->NumElements; i++) {
|
|
element = (Mpi2EventIrConfigElement_t *)
|
|
&event_data->ConfigElement[i];
|
|
element_flags = le16toh(element->ElementFlags);
|
|
if ((element_flags &
|
|
MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK) !=
|
|
MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT)
|
|
continue;
|
|
if (element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_ADDED ||
|
|
element->ReasonCode ==
|
|
MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED) {
|
|
if (mt_entry->physical_id == wwid_table[i]) {
|
|
match = 1;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (match) {
|
|
do {
|
|
mt_idx++;
|
|
if (mt_idx > end_idx)
|
|
return 1;
|
|
mt_entry = &sc->mapping_table[mt_idx];
|
|
} while (mt_entry->device_info & MPS_MAP_IN_USE);
|
|
goto search_again;
|
|
}
|
|
*map_idx = mt_idx;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* mps_mapping_ir_config_change_event - handle IR config change list events
|
|
* @sc: per adapter object
|
|
* @event_data: event data payload
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
void
|
|
mps_mapping_ir_config_change_event(struct mps_softc *sc,
|
|
Mpi2EventDataIrConfigChangeList_t *event_data)
|
|
{
|
|
Mpi2EventIrConfigElement_t *element;
|
|
int i;
|
|
u64 *wwid_table;
|
|
u32 map_idx, flags;
|
|
struct dev_mapping_table *mt_entry;
|
|
u16 element_flags;
|
|
u8 log_full_error = 0;
|
|
|
|
wwid_table = malloc(sizeof(u64) * event_data->NumElements, M_MPT2,
|
|
M_NOWAIT | M_ZERO);
|
|
if (!wwid_table)
|
|
goto out;
|
|
element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
|
|
flags = le32toh(event_data->Flags);
|
|
for (i = 0; i < event_data->NumElements; i++, element++) {
|
|
element_flags = le16toh(element->ElementFlags);
|
|
if ((element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_ADDED) &&
|
|
(element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_REMOVED) &&
|
|
(element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE)
|
|
&& (element->ReasonCode !=
|
|
MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED))
|
|
continue;
|
|
if ((element_flags &
|
|
MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK) ==
|
|
MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT) {
|
|
mps_config_get_volume_wwid(sc,
|
|
le16toh(element->VolDevHandle), &wwid_table[i]);
|
|
map_idx = _mapping_get_ir_mt_idx_from_wwid(sc,
|
|
wwid_table[i]);
|
|
if (map_idx != MPS_MAPTABLE_BAD_IDX) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
mt_entry->device_info |= MPS_MAP_IN_USE;
|
|
}
|
|
}
|
|
}
|
|
if (flags == MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
|
|
goto out;
|
|
else {
|
|
element = (Mpi2EventIrConfigElement_t *)&event_data->
|
|
ConfigElement[0];
|
|
for (i = 0; i < event_data->NumElements; i++, element++) {
|
|
if (element->ReasonCode ==
|
|
MPI2_EVENT_IR_CHANGE_RC_ADDED ||
|
|
element->ReasonCode ==
|
|
MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED) {
|
|
map_idx = _mapping_get_ir_mt_idx_from_wwid
|
|
(sc, wwid_table[i]);
|
|
if (map_idx != MPS_MAPTABLE_BAD_IDX) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
mt_entry->channel = MPS_RAID_CHANNEL;
|
|
mt_entry->id = map_idx;
|
|
mt_entry->dev_handle = le16toh
|
|
(element->VolDevHandle);
|
|
mt_entry->device_info =
|
|
MPS_DEV_RESERVED | MPS_MAP_IN_USE;
|
|
_mapping_update_ir_missing_cnt(sc,
|
|
map_idx, element, wwid_table[i]);
|
|
continue;
|
|
}
|
|
map_idx = _mapping_get_free_ir_mt_idx(sc);
|
|
if (map_idx == MPS_MAPTABLE_BAD_IDX)
|
|
log_full_error = 1;
|
|
else if (i < (event_data->NumElements - 1)) {
|
|
log_full_error =
|
|
_mapping_check_update_ir_mt_idx
|
|
(sc, event_data, i, &map_idx,
|
|
wwid_table);
|
|
}
|
|
if (log_full_error) {
|
|
printf("%s: no space to add the RAID "
|
|
"volume with handle 0x%04x in "
|
|
"mapping table\n", __func__, le16toh
|
|
(element->VolDevHandle));
|
|
continue;
|
|
}
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
mt_entry->physical_id = wwid_table[i];
|
|
mt_entry->channel = MPS_RAID_CHANNEL;
|
|
mt_entry->id = map_idx;
|
|
mt_entry->dev_handle = le16toh(element->
|
|
VolDevHandle);
|
|
mt_entry->device_info = MPS_DEV_RESERVED |
|
|
MPS_MAP_IN_USE;
|
|
mt_entry->init_complete = 0;
|
|
_mapping_update_ir_missing_cnt(sc, map_idx,
|
|
element, wwid_table[i]);
|
|
} else if (element->ReasonCode ==
|
|
MPI2_EVENT_IR_CHANGE_RC_REMOVED) {
|
|
map_idx = _mapping_get_ir_mt_idx_from_wwid(sc,
|
|
wwid_table[i]);
|
|
if (map_idx == MPS_MAPTABLE_BAD_IDX) {
|
|
printf("%s: failed to remove a volume "
|
|
"because it has already been "
|
|
"removed\n", __func__);
|
|
continue;
|
|
}
|
|
_mapping_update_ir_missing_cnt(sc, map_idx,
|
|
element, wwid_table[i]);
|
|
} else if (element->ReasonCode ==
|
|
MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED) {
|
|
map_idx = _mapping_get_mt_idx_from_handle(sc,
|
|
le16toh(element->VolDevHandle));
|
|
if (map_idx == MPS_MAPTABLE_BAD_IDX) {
|
|
printf("%s: failed to remove volume "
|
|
"with handle 0x%04x because it has "
|
|
"already been removed\n", __func__,
|
|
le16toh(element->VolDevHandle));
|
|
continue;
|
|
}
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
_mapping_update_ir_missing_cnt(sc, map_idx,
|
|
element, mt_entry->physical_id);
|
|
}
|
|
}
|
|
}
|
|
|
|
out:
|
|
_mapping_flush_dpm_pages(sc);
|
|
free(wwid_table, M_MPT2);
|
|
if (sc->pending_map_events)
|
|
sc->pending_map_events--;
|
|
}
|