freebsd-skq/sys/dev/ipmi/ipmivars.h
John Baldwin 943bebd2c9 Remove hack attempt at using devfs cloning for per-file descriptor storage.
Use the much simpler cdevpriv for per-fd state and enable it.  This allows
multiple opens of /dev/ipmi0 (e.g. using ipmitool while ipmievd is running
in the background).

MFC after:	1 week
2008-08-28 02:13:53 +00:00

257 lines
7.9 KiB
C

/*-
* Copyright (c) 2006 IronPort Systems Inc. <ambrisko@ironport.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef __IPMIVARS_H__
#define __IPMIVARS_H__
struct ipmi_get_info {
int iface_type;
uint64_t address;
int offset;
int io_mode;
int irq;
};
struct ipmi_device;
struct ipmi_request {
TAILQ_ENTRY(ipmi_request) ir_link;
struct ipmi_device *ir_owner; /* Driver uses NULL. */
u_char *ir_request; /* Request is data to send to BMC. */
size_t ir_requestlen;
u_char *ir_reply; /* Reply is data read from BMC. */
size_t ir_replybuflen; /* Length of ir_reply[] buffer. */
int ir_replylen; /* Length of reply from BMC. */
int ir_error;
long ir_msgid;
uint8_t ir_addr;
uint8_t ir_command;
uint8_t ir_compcode;
};
#define MAX_RES 3
#define KCS_DATA 0
#define KCS_CTL_STS 1
#define SMIC_DATA 0
#define SMIC_CTL_STS 1
#define SMIC_FLAGS 2
struct ipmi_softc;
/* Per file descriptor data. */
struct ipmi_device {
TAILQ_ENTRY(ipmi_device) ipmi_link;
TAILQ_HEAD(,ipmi_request) ipmi_completed_requests;
struct selinfo ipmi_select;
struct ipmi_softc *ipmi_softc;
int ipmi_closing;
int ipmi_requests;
u_char ipmi_address; /* IPMB address. */
u_char ipmi_lun;
};
struct ipmi_kcs {
};
struct ipmi_smic {
};
struct ipmi_ssif {
device_t smbus;
int smbus_address;
};
struct ipmi_softc {
device_t ipmi_dev;
union {
struct ipmi_kcs kcs;
struct ipmi_smic smic;
struct ipmi_ssif ssif;
} _iface;
int ipmi_io_rid;
int ipmi_io_type;
struct resource *ipmi_io_res[MAX_RES];
int ipmi_io_spacing;
int ipmi_irq_rid;
struct resource *ipmi_irq_res;
void *ipmi_irq;
int ipmi_detaching;
int ipmi_opened;
struct cdev *ipmi_cdev;
TAILQ_HEAD(,ipmi_request) ipmi_pending_requests;
eventhandler_tag ipmi_watchdog_tag;
struct intr_config_hook ipmi_ich;
struct mtx ipmi_lock;
struct cv ipmi_request_added;
struct proc *ipmi_kthread;
driver_intr_t *ipmi_intr;
int (*ipmi_startup)(struct ipmi_softc *);
int (*ipmi_enqueue_request)(struct ipmi_softc *, struct ipmi_request *);
};
#define ipmi_ssif_smbus_address _iface.ssif.smbus_address
#define ipmi_ssif_smbus _iface.ssif.smbus
struct ipmi_ipmb {
u_char foo;
};
#define KCS_MODE 0x01
#define SMIC_MODE 0x02
#define BT_MODE 0x03
#define SSIF_MODE 0x04
/* KCS status flags */
#define KCS_STATUS_OBF 0x01 /* Data Out ready from BMC */
#define KCS_STATUS_IBF 0x02 /* Data In from System */
#define KCS_STATUS_SMS_ATN 0x04 /* Ready in RX queue */
#define KCS_STATUS_C_D 0x08 /* Command/Data register write*/
#define KCS_STATUS_OEM1 0x10
#define KCS_STATUS_OEM2 0x20
#define KCS_STATUS_S0 0x40
#define KCS_STATUS_S1 0x80
#define KCS_STATUS_STATE(x) ((x)>>6)
#define KCS_STATUS_STATE_IDLE 0x0
#define KCS_STATUS_STATE_READ 0x1
#define KCS_STATUS_STATE_WRITE 0x2
#define KCS_STATUS_STATE_ERROR 0x3
#define KCS_IFACE_STATUS_OK 0x00
#define KCS_IFACE_STATUS_ABORT 0x01
#define KCS_IFACE_STATUS_ILLEGAL 0x02
#define KCS_IFACE_STATUS_LENGTH_ERR 0x06
#define KCS_IFACE_STATUS_UNKNOWN_ERR 0xff
/* KCS control codes */
#define KCS_CONTROL_GET_STATUS_ABORT 0x60
#define KCS_CONTROL_WRITE_START 0x61
#define KCS_CONTROL_WRITE_END 0x62
#define KCS_DATA_IN_READ 0x68
/* SMIC status flags */
#define SMIC_STATUS_BUSY 0x01 /* System set and BMC clears it */
#define SMIC_STATUS_SMS_ATN 0x04 /* BMC has a message */
#define SMIC_STATUS_EVT_ATN 0x08 /* Event has been RX */
#define SMIC_STATUS_SMI 0x10 /* asserted SMI */
#define SMIC_STATUS_TX_RDY 0x40 /* Ready to accept WRITE */
#define SMIC_STATUS_RX_RDY 0x80 /* Ready to read */
#define SMIC_STATUS_RESERVED 0x22
/* SMIC control codes */
#define SMIC_CC_SMS_GET_STATUS 0x40
#define SMIC_CC_SMS_WR_START 0x41
#define SMIC_CC_SMS_WR_NEXT 0x42
#define SMIC_CC_SMS_WR_END 0x43
#define SMIC_CC_SMS_RD_START 0x44
#define SMIC_CC_SMS_RD_NEXT 0x45
#define SMIC_CC_SMS_RD_END 0x46
/* SMIC status codes */
#define SMIC_SC_SMS_RDY 0xc0
#define SMIC_SC_SMS_WR_START 0xc1
#define SMIC_SC_SMS_WR_NEXT 0xc2
#define SMIC_SC_SMS_WR_END 0xc3
#define SMIC_SC_SMS_RD_START 0xc4
#define SMIC_SC_SMS_RD_NEXT 0xc5
#define SMIC_SC_SMS_RD_END 0xc6
#define IPMI_ADDR(netfn, lun) ((netfn) << 2 | (lun))
#define IPMI_REPLY_ADDR(addr) ((addr) + 0x4)
#define IPMI_LOCK(sc) mtx_lock(&(sc)->ipmi_lock)
#define IPMI_UNLOCK(sc) mtx_unlock(&(sc)->ipmi_lock)
#define IPMI_LOCK_ASSERT(sc) mtx_assert(&(sc)->ipmi_lock, MA_OWNED)
#define ipmi_alloc_driver_request(addr, cmd, reqlen, replylen) \
ipmi_alloc_request(NULL, 0, (addr), (cmd), (reqlen), (replylen))
#if __FreeBSD_version < 601105
#define bus_read_1(r, o) \
bus_space_read_1(rman_get_bustag(r), rman_get_bushandle(r), (o))
#define bus_write_1(r, o, v) \
bus_space_write_1(rman_get_bustag(r), rman_get_bushandle(r), (o), (v))
#endif
/* I/O to a single I/O resource. */
#define INB_SINGLE(sc, x) \
bus_read_1((sc)->ipmi_io_res[0], (sc)->ipmi_io_spacing * (x))
#define OUTB_SINGLE(sc, x, value) \
bus_write_1((sc)->ipmi_io_res[0], (sc)->ipmi_io_spacing * (x), value)
/* I/O with each register in its in I/O resource. */
#define INB_MULTIPLE(sc, x) \
bus_read_1((sc)->ipmi_io_res[(x)], 0)
#define OUTB_MULTIPLE(sc, x, value) \
bus_write_1((sc)->ipmi_io_res[(x)], 0, value)
/*
* Determine I/O method based on whether or not we have more than one I/O
* resource.
*/
#define INB(sc, x) \
((sc)->ipmi_io_res[1] != NULL ? INB_MULTIPLE(sc, x) : INB_SINGLE(sc, x))
#define OUTB(sc, x, value) \
((sc)->ipmi_io_res[1] != NULL ? OUTB_MULTIPLE(sc, x, value) : \
OUTB_SINGLE(sc, x, value))
#define MAX_TIMEOUT 3 * hz
int ipmi_attach(device_t);
int ipmi_detach(device_t);
void ipmi_release_resources(device_t);
/* Manage requests. */
struct ipmi_request *ipmi_alloc_request(struct ipmi_device *, long, uint8_t,
uint8_t, size_t, size_t);
void ipmi_complete_request(struct ipmi_softc *, struct ipmi_request *);
struct ipmi_request *ipmi_dequeue_request(struct ipmi_softc *);
void ipmi_free_request(struct ipmi_request *);
int ipmi_polled_enqueue_request(struct ipmi_softc *, struct ipmi_request *);
int ipmi_submit_driver_request(struct ipmi_softc *, struct ipmi_request *,
int);
/* Identify BMC interface via SMBIOS. */
int ipmi_smbios_identify(struct ipmi_get_info *);
/* Match BMC PCI device listed in SMBIOS. */
const char *ipmi_pci_match(uint16_t, uint16_t);
/* Interface attach routines. */
int ipmi_kcs_attach(struct ipmi_softc *);
int ipmi_kcs_probe_align(struct ipmi_softc *);
int ipmi_smic_attach(struct ipmi_softc *);
int ipmi_ssif_attach(struct ipmi_softc *, device_t, int);
#ifdef IPMB
int ipmi_handle_attn(struct ipmi_softc *);
#endif
extern devclass_t ipmi_devclass;
extern int ipmi_attached;
#endif /* !__IPMIVARS_H__ */