diff --git a/RELNOTES.md b/RELNOTES.md index 514323f..82f78ab 100644 --- a/RELNOTES.md +++ b/RELNOTES.md @@ -366,7 +366,7 @@ iperf 3.2 2017-06-26 is primarily a cosmetic change to prevent these fairly meaningless intervals from showing up in the output (#278). - * Compatiblity note: Users running iperf3 3.2 or newer from the + * Compatibility note: Users running iperf3 3.2 or newer from the bwctl utility will need to obtain version 1.6.3 or newer of bwctl. Note that bwctl, a component of the perfSONAR toolkit, has been deprecated in favor of pScheduler since the release of perfSONAR @@ -871,7 +871,7 @@ iperf 3.0b3 2010-07-23 * Better error handling * All errors now handled with iperf_error() * All functions that can return errors return NULL or -1 on error and set i_errno appropriately - * Iperf API intruduced + * Iperf API introduced * Support for adding new protocols * Added support for callback functions * on_connect - executes after a connection is made to the server diff --git a/docs/faq.rst b/docs/faq.rst index d7d182e..7d7234d 100644 --- a/docs/faq.rst +++ b/docs/faq.rst @@ -116,7 +116,7 @@ How can I build on a system that doesn't support profiled executables? And then run ``./bootstrap.sh``, that will regenerate the project Makefiles to make the exclusion of the profiled iperf3 executable - permanant (within that source tree). + permanent (within that source tree). I'm seeing quite a bit of unexpected UDP loss. Why? First, confirm you are using iperf 3.1.5 or higher. There was an diff --git a/docs/news.rst b/docs/news.rst index 24d87a1..1f18f67 100644 --- a/docs/news.rst +++ b/docs/news.rst @@ -410,6 +410,6 @@ https://github.com/esnet/iperf During development, there were various distributions of the source code unofficially released carrying a 3.0.0 version number. Because -of the possiblity for confusion, this first public release of iperf3 +of the possibility for confusion, this first public release of iperf3 was numbered 3.0.1. diff --git a/src/iperf.h b/src/iperf.h index 3fc91d0..f50e1bb 100644 --- a/src/iperf.h +++ b/src/iperf.h @@ -79,7 +79,7 @@ typedef uint64_t iperf_size_t; struct iperf_interval_results { - iperf_size_t bytes_transferred; /* bytes transfered in this interval */ + iperf_size_t bytes_transferred; /* bytes transferred in this interval */ struct iperf_time interval_start_time; struct iperf_time interval_end_time; float interval_duration; @@ -146,7 +146,7 @@ struct iperf_settings int blksize; /* size of read/writes (-l) */ iperf_size_t rate; /* target data rate for application pacing*/ iperf_size_t bitrate_limit; /* server's maximum allowed total data rate for all streams*/ - double bitrate_limit_interval; /* interval for avaraging total data rate */ + double bitrate_limit_interval; /* interval for averaging total data rate */ int bitrate_limit_stats_per_interval; /* calculated number of stats periods for averaging total data rate */ uint64_t fqrate; /* target data rate for FQ pacing*/ int pacing_timer; /* pacing timer in microseconds */ @@ -350,7 +350,7 @@ struct iperf_test iperf_size_t bitrate_limit_stats_count; /* Number of stats periods accumulated for server's total bitrate average */ iperf_size_t *bitrate_limit_intervals_traffic_bytes; /* Pointer to a cyclic array that includes the last interval's bytes transferred */ - iperf_size_t bitrate_limit_last_interval_index; /* Index of the last interval traffic insrted into the cyclic array */ + iperf_size_t bitrate_limit_last_interval_index; /* Index of the last interval traffic inserted into the cyclic array */ int bitrate_limit_exceeded; /* Set by callback routine when average data rate exceeded the server's bitrate limit */ int server_last_run_rc; /* Save last server run rc for next test */ diff --git a/src/iperf3.1 b/src/iperf3.1 index 41fa2b1..21066a3 100644 --- a/src/iperf3.1 +++ b/src/iperf3.1 @@ -96,7 +96,7 @@ test by specifying the --get-server-output flag. Either the client or the server can produce its output in a JSON structure, useful for integration with other programs, by passing it the -J flag. -Because the contents of the JSON structure are only competely known +Because the contents of the JSON structure are only completely known after the test has finished, no JSON output will be emitted until the end of the test. .PP @@ -137,7 +137,7 @@ In addition, on the client side you can override the server's affinity for just that one test, using the \fIn,m\fR form of argument. Note that when using this feature, a process will only be bound -to a single CPU (as opposed to a set containing potentialy multiple +to a single CPU (as opposed to a set containing potentially multiple CPUs). .TP .BR -B ", " --bind " \fIhost\fR" diff --git a/src/iperf_api.c b/src/iperf_api.c index 15f928c..95ac3f0 100644 --- a/src/iperf_api.c +++ b/src/iperf_api.c @@ -1676,7 +1676,7 @@ iperf_check_throttle(struct iperf_stream *sp, struct iperf_time *nowP) } } -/* Verify that average traffic is not greater than the specifid limit */ +/* Verify that average traffic is not greater than the specified limit */ void iperf_check_total_rate(struct iperf_test *test, iperf_size_t last_interval_bytes_transferred) { @@ -1688,7 +1688,7 @@ iperf_check_total_rate(struct iperf_test *test, iperf_size_t last_interval_bytes if (test->done || test->settings->bitrate_limit == 0) // Continue only if check should be done return; - /* Add last inetrval's transffered bytes to the array */ + /* Add last inetrval's transferred bytes to the array */ if (++test->bitrate_limit_last_interval_index >= test->settings->bitrate_limit_stats_per_interval) test->bitrate_limit_last_interval_index = 0; test->bitrate_limit_intervals_traffic_bytes[test->bitrate_limit_last_interval_index] = last_interval_bytes_transferred; @@ -2386,7 +2386,7 @@ get_results(struct iperf_test *test) sp->peer_packet_count = pcount; sp->result->bytes_received = bytes_transferred; /* - * We have to handle the possibilty that + * We have to handle the possibility that * start_time and end_time might not be * available; this is the case for older (pre-3.2) * servers. @@ -2871,7 +2871,7 @@ iperf_free_test(struct iperf_test *test) } } - /* Free interval's traffic array for avrage rate calculations */ + /* Free interval's traffic array for average rate calculations */ if (test->bitrate_limit_intervals_traffic_bytes != NULL) free(test->bitrate_limit_intervals_traffic_bytes); @@ -3175,7 +3175,7 @@ iperf_print_intermediate(struct iperf_test *test) /* * If the interval is at least 10% the normal interval - * length, or if there were actual bytes transferrred, + * length, or if there were actual bytes transferred, * then we want to keep this interval. */ if (interval_len >= test->stats_interval * 0.10 || @@ -3447,7 +3447,7 @@ iperf_print_results(struct iperf_test *test) * the streams. It's possible to not have any streams at all * if the client got interrupted before it got to do anything. * - * Also note that we try to keep seperate values for the sender + * Also note that we try to keep separate values for the sender * and receiver ending times. Earlier iperf (3.1 and earlier) * servers didn't send that to the clients, so in this case we fall * back to using the client's ending timestamp. The fallback is diff --git a/src/iperf_auth.c b/src/iperf_auth.c index 56b7382..cf85c4c 100644 --- a/src/iperf_auth.c +++ b/src/iperf_auth.c @@ -246,7 +246,7 @@ int encrypt_rsa_message(const char *plaintext, EVP_PKEY *public_key, unsigned ch BIO_free(bioBuff); if (encryptedtext_len < 0) { - /* We probably shoudln't be printing stuff like this */ + /* We probably shouldn't be printing stuff like this */ fprintf(stderr, "%s\n", ERR_error_string(ERR_get_error(), NULL)); } @@ -273,7 +273,7 @@ int decrypt_rsa_message(const unsigned char *encryptedtext, const int encryptedt BIO_free(bioBuff); if (plaintext_len < 0) { - /* We probably shoudln't be printing stuff like this */ + /* We probably shouldn't be printing stuff like this */ fprintf(stderr, "%s\n", ERR_error_string(ERR_get_error(), NULL)); } diff --git a/src/iperf_error.c b/src/iperf_error.c index 1bcf8a8..bb985bc 100644 --- a/src/iperf_error.c +++ b/src/iperf_error.c @@ -436,7 +436,7 @@ iperf_strerror(int int_errno) snprintf(errstr, len, "skew threshold must be a positive number"); break; case IEIDLETIMEOUT: - snprintf(errstr, len, "idle timeout parameter is not positive or larget then allowed limit"); + snprintf(errstr, len, "idle timeout parameter is not positive or larger than allowed limit"); break; case IENOMSG: snprintf(errstr, len, "idle timeout for receiving data"); diff --git a/src/iperf_tcp.c b/src/iperf_tcp.c index c78f4f5..ef0ef72 100644 --- a/src/iperf_tcp.c +++ b/src/iperf_tcp.c @@ -274,7 +274,7 @@ iperf_tcp_listen(struct iperf_test *test) } /* - * If we got an IPv6 socket, figure out if it shoudl accept IPv4 + * If we got an IPv6 socket, figure out if it should accept IPv4 * connections as well. See documentation in netannounce() for * more details. */ diff --git a/src/main.c b/src/main.c index 1580c35..c2dbd2e 100644 --- a/src/main.c +++ b/src/main.c @@ -62,7 +62,7 @@ main(int argc, char **argv) // XXX: Setting the process affinity requires root on most systems. // Is this a feature we really need? #ifdef TEST_PROC_AFFINITY - /* didnt seem to work.... */ + /* didn't seem to work.... */ /* * increasing the priority of the process to minimise packet generation * delay diff --git a/src/tcp_info.c b/src/tcp_info.c index 6fa1709..63c7bbc 100644 --- a/src/tcp_info.c +++ b/src/tcp_info.c @@ -33,7 +33,7 @@ * Note that this is only really useful on Linux. * XXX: only standard on linux versions 2.4 and later # - * FreeBSD has a limitted implementation that only includes the following: + * FreeBSD has a limited implementation that only includes the following: * tcpi_snd_ssthresh, tcpi_snd_cwnd, tcpi_rcv_space, tcpi_rtt * Based on information on http://wiki.freebsd.org/8.0TODO, I dont think this will be * fixed before v8.1 at the earliest.