numam-dpdk/doc/guides/nics/features/ngbe.ini

;
; Supported features of the 'ngbe' network poll mode driver.
;
; Refer to default.ini for the full list of available PMD features.
;
[Features]
Speed capabilities   = Y
Link status          = Y
Link status event    = Y
Free Tx mbuf on demand = Y
Queue start/stop     = Y
Burst mode info      = Y
MTU update           = Y
Scattered Rx         = Y
TSO                  = Y
Promiscuous mode     = Y
Allmulticast mode    = Y
Unicast MAC filter   = Y
Multicast MAC filter = Y
RSS hash             = Y
RSS key update       = Y
RSS reta update      = Y
SR-IOV               = Y
VLAN filter          = Y
Flow control         = Y
CRC offload          = Y
VLAN offload         = Y
QinQ offload         = Y
L3 checksum offload  = Y
L4 checksum offload  = Y
Inner L3 checksum    = Y
Inner L4 checksum    = Y
Packet type parsing  = Y
Timesync             = Y
Rx descriptor status = Y
Tx descriptor status = Y
Basic stats          = Y
Extended stats       = Y
Stats per queue      = Y
FW version           = Y
EEPROM dump          = Y
Registers dump       = Y
LED                  = Y
Multiprocess aware   = Y
Linux                = Y
ARMv8                = Y
x86-32               = Y
x86-64               = Y
net/ngbe: add build and doc infrastructure Adding bare minimum PMD library and doc build infrastructure and claim the maintainership for ngbe PMD. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-07-08 09:32:21 +00:00			`;`
			`; Supported features of the 'ngbe' network poll mode driver.`
			`;`
			`; Refer to default.ini for the full list of available PMD features.`
			`;`
			`[Features]`
net/ngbe: support link update Register to handle device interrupt. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-07-08 09:32:30 +00:00			`Speed capabilities = Y`
			`Link status = Y`
			`Link status event = Y`
net/ngbe: support Tx done cleanup Add support for API rte_eth_tx_done_cleanup(). Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:23 +00:00			`Free Tx mbuf on demand = Y`
net/ngbe: support Tx queue start/stop Initializes transmit unit, support to start and stop transmit unit for specified queues. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-07-08 09:32:35 +00:00			`Queue start/stop = Y`
net/ngbe: support Rx/Tx burst mode info Support to get Rx/Tx burst mode info. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:02 +00:00			`Burst mode info = Y`
net/ngbe: support MTU set Support updating port MTU. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:08 +00:00			`MTU update = Y`
net/ngbe: support scattered Rx Add scattered Rx function to support receiving segmented mbufs. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:49:59 +00:00			`Scattered Rx = Y`
net/ngbe: support TSO Add transmit datapath with offloads, and support TCP segmentation offload. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:01 +00:00			`TSO = Y`
net/ngbe: support device promiscuous and allmulticast mode Support to enable/disable promiscuous and allmulticast mode for a port. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:09 +00:00			`Promiscuous mode = Y`
			`Allmulticast mode = Y`
net/ngbe: support MAC filters Add MAC addresses to filter incoming packets, support to set multicast addresses to filter. And support to set unicast table array. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:12 +00:00			`Unicast MAC filter = Y`
			`Multicast MAC filter = Y`
net/ngbe: support RSS hash Support RSS hashing on Rx, and configuration of RSS hash computation. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:13 +00:00			`RSS hash = Y`
			`RSS key update = Y`
			`RSS reta update = Y`
net/ngbe: support SR-IOV Initialize and configure PF module to support SRIOV. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:14 +00:00			`SR-IOV = Y`
net/ngbe: support VLAN offload and VLAN filter Support to set VLAN and QinQ offload, and filter of a VLAN tag identifier. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:05 +00:00			`VLAN filter = Y`
net/ngbe: support flow control Support to get and set flow control. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:16 +00:00			`Flow control = Y`
net/ngbe: support CRC offload Support to strip or keep CRC in Rx path. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:03 +00:00			`CRC offload = Y`
net/ngbe: support VLAN offload and VLAN filter Support to set VLAN and QinQ offload, and filter of a VLAN tag identifier. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:05 +00:00			`VLAN offload = Y`
			`QinQ offload = Y`
net/ngbe: support Rx checksum offload Support IP/L4 checksum on Rx, and convert it to mbuf flags. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:00 +00:00			`L3 checksum offload = Y`
			`L4 checksum offload = Y`
net/ngbe: support TSO Add transmit datapath with offloads, and support TCP segmentation offload. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:01 +00:00			`Inner L3 checksum = Y`
			`Inner L4 checksum = Y`
net/ngbe: support packet type query Add packet type macro definition and convert ptype to ptid. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:49:58 +00:00			`Packet type parsing = Y`
net/ngbe: support timesync Add to support IEEE1588/802.1AS timestamping, and IEEE1588 timestamp offload on Tx. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:20 +00:00			`Timesync = Y`
net/ngbe: support Rx and Tx descriptor status Supports to get the number of used Rx descriptors, and check the status of Rx and Tx descriptors. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:22 +00:00			`Rx descriptor status = Y`
			`Tx descriptor status = Y`
net/ngbe: support basic statistics Support to read and clear basic statistics. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:06 +00:00			`Basic stats = Y`
net/ngbe: support device xstats Add device extended stats get from reading hardware registers. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:07 +00:00			`Extended stats = Y`
net/ngbe: support basic statistics Support to read and clear basic statistics. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:06 +00:00			`Stats per queue = Y`
net/ngbe: support FW version query Add firmware version get operation. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:10 +00:00			`FW version = Y`
net/ngbe: support EEPROM dump Support to get and set device EEPROM data. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:18 +00:00			`EEPROM dump = Y`
net/ngbe: support register dump Support to dump registers. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:19 +00:00			`Registers dump = Y`
net/ngbe: support device LED on/off Support device LED on and off. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-10-21 09:50:17 +00:00			`LED = Y`
net/ngbe: support probe and remove Add device IDs for Wangxun 1Gb NICs, map device IDs to register ngbe PMD. Add basic PCIe ethdev probe and remove. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-07-08 09:32:22 +00:00			`Multiprocess aware = Y`
net/ngbe: add build and doc infrastructure Adding bare minimum PMD library and doc build infrastructure and claim the maintainership for ngbe PMD. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> 2021-07-08 09:32:21 +00:00			`Linux = Y`
			`ARMv8 = Y`
			`x86-32 = Y`
			`x86-64 = Y`