numam-dpdk/app/test-pmd/flowgen.c

212 lines
5.6 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright 2014-2020 Mellanox Technologies, Ltd
*/
#include <stdarg.h>
#include <string.h>
#include <stdio.h>
#include <errno.h>
#include <stdint.h>
#include <unistd.h>
#include <inttypes.h>
#include <sys/queue.h>
#include <sys/stat.h>
#include <rte_common.h>
#include <rte_byteorder.h>
#include <rte_log.h>
#include <rte_debug.h>
#include <rte_cycles.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
#include <rte_launch.h>
#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_lcore.h>
#include <rte_atomic.h>
#include <rte_branch_prediction.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
#include <rte_interrupts.h>
#include <rte_pci.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_ip.h>
#include <rte_tcp.h>
#include <rte_udp.h>
#include <rte_string_fns.h>
#include <rte_flow.h>
#include "testpmd.h"
/* hardcoded configuration (for now) */
static unsigned cfg_n_flows = 1024;
static uint32_t cfg_ip_src = RTE_IPV4(10, 254, 0, 0);
static uint32_t cfg_ip_dst = RTE_IPV4(10, 253, 0, 0);
static uint16_t cfg_udp_src = 1000;
static uint16_t cfg_udp_dst = 1001;
static struct rte_ether_addr cfg_ether_src =
{{ 0x00, 0x01, 0x02, 0x03, 0x04, 0x00 }};
static struct rte_ether_addr cfg_ether_dst =
{{ 0x00, 0x01, 0x02, 0x03, 0x04, 0x01 }};
#define IP_DEFTTL 64 /* from RFC 1340. */
static inline uint16_t
ip_sum(const unaligned_uint16_t *hdr, int hdr_len)
{
uint32_t sum = 0;
while (hdr_len > 1)
{
sum += *hdr++;
if (sum & 0x80000000)
sum = (sum & 0xFFFF) + (sum >> 16);
hdr_len -= 2;
}
while (sum >> 16)
sum = (sum & 0xFFFF) + (sum >> 16);
return ~sum;
}
/*
* Multi-flow generation mode.
*
* We originate a bunch of flows (varying destination IP addresses), and
* terminate receive traffic. Received traffic is simply discarded, but we
* still do so in order to maintain traffic statistics.
*/
static void
pkt_burst_flow_gen(struct fwd_stream *fs)
{
unsigned pkt_size = tx_pkt_length - 4; /* Adjust FCS */
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
struct rte_mempool *mbp;
struct rte_mbuf *pkt;
struct rte_ether_hdr *eth_hdr;
struct rte_ipv4_hdr *ip_hdr;
struct rte_udp_hdr *udp_hdr;
uint16_t vlan_tci, vlan_tci_outer;
uint64_t ol_flags = 0;
uint16_t nb_rx;
uint16_t nb_tx;
uint16_t nb_pkt;
uint16_t i;
uint32_t retry;
uint64_t tx_offloads;
uint64_t start_tsc = 0;
static int next_flow = 0;
get_start_cycles(&start_tsc);
/* Receive a burst of packets and discard them. */
nb_rx = rte_eth_rx_burst(fs->rx_port, fs->rx_queue, pkts_burst,
nb_pkt_per_burst);
fs->rx_packets += nb_rx;
for (i = 0; i < nb_rx; i++)
rte_pktmbuf_free(pkts_burst[i]);
mbp = current_fwd_lcore()->mbp;
vlan_tci = ports[fs->tx_port].tx_vlan_id;
vlan_tci_outer = ports[fs->tx_port].tx_vlan_id_outer;
tx_offloads = ports[fs->tx_port].dev_conf.txmode.offloads;
if (tx_offloads & DEV_TX_OFFLOAD_VLAN_INSERT)
ol_flags |= PKT_TX_VLAN_PKT;
if (tx_offloads & DEV_TX_OFFLOAD_QINQ_INSERT)
ol_flags |= PKT_TX_QINQ_PKT;
if (tx_offloads & DEV_TX_OFFLOAD_MACSEC_INSERT)
ol_flags |= PKT_TX_MACSEC;
for (nb_pkt = 0; nb_pkt < nb_pkt_per_burst; nb_pkt++) {
pkt = rte_mbuf_raw_alloc(mbp);
if (!pkt)
break;
pkt->data_len = pkt_size;
pkt->next = NULL;
/* Initialize Ethernet header. */
eth_hdr = rte_pktmbuf_mtod(pkt, struct rte_ether_hdr *);
rte_ether_addr_copy(&cfg_ether_dst, &eth_hdr->d_addr);
rte_ether_addr_copy(&cfg_ether_src, &eth_hdr->s_addr);
eth_hdr->ether_type = rte_cpu_to_be_16(RTE_ETHER_TYPE_IPV4);
/* Initialize IP header. */
ip_hdr = (struct rte_ipv4_hdr *)(eth_hdr + 1);
memset(ip_hdr, 0, sizeof(*ip_hdr));
ip_hdr->version_ihl = RTE_IPV4_VHL_DEF;
ip_hdr->type_of_service = 0;
ip_hdr->fragment_offset = 0;
ip_hdr->time_to_live = IP_DEFTTL;
ip_hdr->next_proto_id = IPPROTO_UDP;
ip_hdr->packet_id = 0;
ip_hdr->src_addr = rte_cpu_to_be_32(cfg_ip_src);
ip_hdr->dst_addr = rte_cpu_to_be_32(cfg_ip_dst +
next_flow);
ip_hdr->total_length = RTE_CPU_TO_BE_16(pkt_size -
sizeof(*eth_hdr));
ip_hdr->hdr_checksum = ip_sum((unaligned_uint16_t *)ip_hdr,
sizeof(*ip_hdr));
/* Initialize UDP header. */
udp_hdr = (struct rte_udp_hdr *)(ip_hdr + 1);
udp_hdr->src_port = rte_cpu_to_be_16(cfg_udp_src);
udp_hdr->dst_port = rte_cpu_to_be_16(cfg_udp_dst);
udp_hdr->dgram_cksum = 0; /* No UDP checksum. */
udp_hdr->dgram_len = RTE_CPU_TO_BE_16(pkt_size -
sizeof(*eth_hdr) -
sizeof(*ip_hdr));
mbuf: flatten struct vlan_macip The vlan_macip structure combined a vlan tag id with l2 and l3 headers lengths for tracking offloads. However, this structure was only used as a unit by the e1000 and ixgbe drivers, not generally. This patch removes the structure from the mbuf header and places the fields into the mbuf structure directly at the required point, without any net effect on the structure layout. This allows us to treat the vlan tags and header length fields as separate for future mbuf changes. The drivers which were written to use the combined structure still do so, using a driver-local definition of it. Reduce perf regression caused by splitting vlan_macip field. This is done by providing a single uint16_t value to allow writing/clearing the l2 and l3 lengths together. There is still a small perf hit to the slow path TX due to the reads from vlan_tci and l2/l3 lengths being separated. (<5% in my tests with testpmd with no extra params). Unfortunately, this cannot be eliminated, without restoring the vlan tags and l2/l3 lengths as a combined 32-bit field. This would prevent us from ever looking to move those fields about and is an artificial tie that applies only for performance in igb and ixgbe drivers. Therefore, this patch keeps the vlan_tci field separate from the lengths as the best solution going forward. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2014-09-09 14:40:56 +00:00
pkt->nb_segs = 1;
pkt->pkt_len = pkt_size;
pkt->ol_flags &= EXT_ATTACHED_MBUF;
pkt->ol_flags |= ol_flags;
mbuf: flatten struct vlan_macip The vlan_macip structure combined a vlan tag id with l2 and l3 headers lengths for tracking offloads. However, this structure was only used as a unit by the e1000 and ixgbe drivers, not generally. This patch removes the structure from the mbuf header and places the fields into the mbuf structure directly at the required point, without any net effect on the structure layout. This allows us to treat the vlan tags and header length fields as separate for future mbuf changes. The drivers which were written to use the combined structure still do so, using a driver-local definition of it. Reduce perf regression caused by splitting vlan_macip field. This is done by providing a single uint16_t value to allow writing/clearing the l2 and l3 lengths together. There is still a small perf hit to the slow path TX due to the reads from vlan_tci and l2/l3 lengths being separated. (<5% in my tests with testpmd with no extra params). Unfortunately, this cannot be eliminated, without restoring the vlan tags and l2/l3 lengths as a combined 32-bit field. This would prevent us from ever looking to move those fields about and is an artificial tie that applies only for performance in igb and ixgbe drivers. Therefore, this patch keeps the vlan_tci field separate from the lengths as the best solution going forward. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2014-09-09 14:40:56 +00:00
pkt->vlan_tci = vlan_tci;
pkt->vlan_tci_outer = vlan_tci_outer;
pkt->l2_len = sizeof(struct rte_ether_hdr);
pkt->l3_len = sizeof(struct rte_ipv4_hdr);
mbuf: flatten struct vlan_macip The vlan_macip structure combined a vlan tag id with l2 and l3 headers lengths for tracking offloads. However, this structure was only used as a unit by the e1000 and ixgbe drivers, not generally. This patch removes the structure from the mbuf header and places the fields into the mbuf structure directly at the required point, without any net effect on the structure layout. This allows us to treat the vlan tags and header length fields as separate for future mbuf changes. The drivers which were written to use the combined structure still do so, using a driver-local definition of it. Reduce perf regression caused by splitting vlan_macip field. This is done by providing a single uint16_t value to allow writing/clearing the l2 and l3 lengths together. There is still a small perf hit to the slow path TX due to the reads from vlan_tci and l2/l3 lengths being separated. (<5% in my tests with testpmd with no extra params). Unfortunately, this cannot be eliminated, without restoring the vlan tags and l2/l3 lengths as a combined 32-bit field. This would prevent us from ever looking to move those fields about and is an artificial tie that applies only for performance in igb and ixgbe drivers. Therefore, this patch keeps the vlan_tci field separate from the lengths as the best solution going forward. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2014-09-09 14:40:56 +00:00
pkts_burst[nb_pkt] = pkt;
next_flow = (next_flow + 1) % cfg_n_flows;
}
nb_tx = rte_eth_tx_burst(fs->tx_port, fs->tx_queue, pkts_burst, nb_pkt);
/*
* Retry if necessary
*/
if (unlikely(nb_tx < nb_rx) && fs->retry_enabled) {
retry = 0;
while (nb_tx < nb_rx && retry++ < burst_tx_retry_num) {
rte_delay_us(burst_tx_delay_time);
nb_tx += rte_eth_tx_burst(fs->tx_port, fs->tx_queue,
&pkts_burst[nb_tx], nb_rx - nb_tx);
}
}
fs->tx_packets += nb_tx;
inc_tx_burst_stats(fs, nb_tx);
if (unlikely(nb_tx < nb_pkt)) {
/* Back out the flow counter. */
next_flow -= (nb_pkt - nb_tx);
while (next_flow < 0)
next_flow += cfg_n_flows;
do {
rte_pktmbuf_free(pkts_burst[nb_tx]);
} while (++nb_tx < nb_pkt);
}
get_end_cycles(fs, start_tsc);
}
struct fwd_engine flow_gen_engine = {
.fwd_mode_name = "flowgen",
.port_fwd_begin = NULL,
.port_fwd_end = NULL,
.packet_fwd = pkt_burst_flow_gen,
};