numam-dpdk/drivers/net/mlx5/mlx5_vlan.c

229 lines
6.1 KiB
C
Raw Normal View History

/*-
* BSD LICENSE
*
* Copyright 2015 6WIND S.A.
* Copyright 2015 Mellanox.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of 6WIND S.A. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <stddef.h>
#include <errno.h>
#include <assert.h>
#include <stdint.h>
#include <rte_ethdev.h>
#include <rte_common.h>
#include "mlx5_utils.h"
#include "mlx5.h"
#include "mlx5_autoconf.h"
/**
* Configure a VLAN filter.
*
* @param dev
* Pointer to Ethernet device structure.
* @param vlan_id
* VLAN ID to filter.
* @param on
* Toggle filter.
*
* @return
* 0 on success, errno value on failure.
*/
static int
vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
{
struct priv *priv = dev->data->dev_private;
unsigned int i;
DEBUG("%p: %s VLAN filter ID %" PRIu16,
(void *)dev, (on ? "enable" : "disable"), vlan_id);
assert(priv->vlan_filter_n <= RTE_DIM(priv->vlan_filter));
for (i = 0; (i != priv->vlan_filter_n); ++i)
if (priv->vlan_filter[i] == vlan_id)
break;
/* Check if there's room for another VLAN filter. */
if (i == RTE_DIM(priv->vlan_filter))
return ENOMEM;
if (i < priv->vlan_filter_n) {
assert(priv->vlan_filter_n != 0);
/* Enabling an existing VLAN filter has no effect. */
if (on)
return 0;
/* Remove VLAN filter from list. */
--priv->vlan_filter_n;
memmove(&priv->vlan_filter[i],
&priv->vlan_filter[i + 1],
sizeof(priv->vlan_filter[i]) *
(priv->vlan_filter_n - i));
priv->vlan_filter[priv->vlan_filter_n] = 0;
} else {
assert(i == priv->vlan_filter_n);
/* Disabling an unknown VLAN filter has no effect. */
if (!on)
return 0;
/* Add new VLAN filter. */
priv->vlan_filter[priv->vlan_filter_n] = vlan_id;
++priv->vlan_filter_n;
}
/* Rehash flows in all hash RX queues. */
mlx5: refactor Rx code for the new verbs RSS API The new Verbs RSS API is lower-level than the previous one and much more flexible but requires RX queues to use Work Queues (WQs) internally instead of Queue Pairs (QPs), which are grouped in an indirection table used by a new kind of hash RX QPs. Hash RX QPs and the indirection table together replace the parent RSS QP while WQs are mostly similar to child QPs. RSS hash key is not configurable yet. Summary of changes: - Individual DPDK RX queues do not store flow properties anymore, this info is now part of the hash RX queues. - All functions affecting the parent queue when RSS is enabled or the basic queues otherwise are modified to affect hash RX queues instead. - Hash RX queues are also used when a single DPDK RX queue is configured (no RSS) to remove that special case. - Hash RX queues and indirection table are created/destroyed when device is started/stopped in addition to create/destroy flows. - Contrary to QPs, WQs are moved to the "ready" state before posting RX buffers, otherwise they are ignored. - Resource domain information is added to WQs for better performance. - CQs are not resized anymore when switching between non-SG and SG modes as it does not work correctly with WQs. Use the largest possible size instead, since CQ size does not have to be the same as the number of elements in the RX queue. This also applies to the maximum number of outstanding WRs in a WQ (max_recv_wr). Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com> Signed-off-by: Olga Shern <olgas@mellanox.com> Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Signed-off-by: Or Ami <ora@mellanox.com> Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
2015-10-30 18:55:06 +00:00
priv_mac_addrs_disable(priv);
priv_special_flow_disable_all(priv);
return priv_rehash_flows(priv);
}
/**
* DPDK callback to configure a VLAN filter.
*
* @param dev
* Pointer to Ethernet device structure.
* @param vlan_id
* VLAN ID to filter.
* @param on
* Toggle filter.
*
* @return
* 0 on success, negative errno value on failure.
*/
int
mlx5_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
{
struct priv *priv = dev->data->dev_private;
int ret;
priv_lock(priv);
ret = vlan_filter_set(dev, vlan_id, on);
priv_unlock(priv);
assert(ret >= 0);
return -ret;
}
/**
* Set/reset VLAN stripping for a specific queue.
*
* @param priv
* Pointer to private structure.
* @param idx
* RX queue index.
* @param on
* Enable/disable VLAN stripping.
*/
static void
priv_vlan_strip_queue_set(struct priv *priv, uint16_t idx, int on)
{
struct mlx5_rxq_data *rxq = (*priv->rxqs)[idx];
struct mlx5_rxq_ctrl *rxq_ctrl =
container_of(rxq, struct mlx5_rxq_ctrl, rxq);
struct ibv_wq_attr mod;
uint16_t vlan_offloads =
(on ? IBV_WQ_FLAGS_CVLAN_STRIPPING : 0) |
0;
int err;
DEBUG("set VLAN offloads 0x%x for port %d queue %d",
vlan_offloads, rxq->port_id, idx);
mod = (struct ibv_wq_attr){
.attr_mask = IBV_WQ_ATTR_FLAGS,
.flags_mask = IBV_WQ_FLAGS_CVLAN_STRIPPING,
.flags = vlan_offloads,
};
err = ibv_modify_wq(rxq_ctrl->ibv->wq, &mod);
if (err) {
ERROR("%p: failed to modified stripping mode: %s",
(void *)priv, strerror(err));
return;
}
/* Update related bits in RX queue. */
rxq->vlan_strip = !!on;
}
/**
* Callback to set/reset VLAN stripping for a specific queue.
*
* @param dev
* Pointer to Ethernet device structure.
* @param queue
* RX queue index.
* @param on
* Enable/disable VLAN stripping.
*/
void
mlx5_vlan_strip_queue_set(struct rte_eth_dev *dev, uint16_t queue, int on)
{
struct priv *priv = dev->data->dev_private;
/* Validate hw support */
if (!priv->hw_vlan_strip) {
ERROR("VLAN stripping is not supported");
return;
}
/* Validate queue number */
if (queue >= priv->rxqs_n) {
ERROR("VLAN stripping, invalid queue number %d", queue);
return;
}
priv_lock(priv);
priv_vlan_strip_queue_set(priv, queue, on);
priv_unlock(priv);
}
/**
* Callback to set/reset VLAN offloads for a port.
*
* @param dev
* Pointer to Ethernet device structure.
* @param mask
* VLAN offload bit mask.
*/
void
mlx5_vlan_offload_set(struct rte_eth_dev *dev, int mask)
{
struct priv *priv = dev->data->dev_private;
unsigned int i;
if (mask & ETH_VLAN_STRIP_MASK) {
int hw_vlan_strip = !!dev->data->dev_conf.rxmode.hw_vlan_strip;
if (!priv->hw_vlan_strip) {
ERROR("VLAN stripping is not supported");
return;
}
/* Run on every RX queue and set/reset VLAN stripping. */
priv_lock(priv);
for (i = 0; (i != priv->rxqs_n); i++)
priv_vlan_strip_queue_set(priv, i, hw_vlan_strip);
priv_unlock(priv);
}
}