numam-dpdk/lib/librte_eal/common/eal_common_pci.c

474 lines
13 KiB
C
Raw Normal View History

/*-
* BSD LICENSE
*
* Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* BSD LICENSE
*
* Copyright 2013-2014 6WIND S.A.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of 6WIND S.A. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
devargs: use devargs for vdev and PCI whitelist/blacklist Remove old whitelist code: - remove references to rte_pmd_ring, rte_pmd_pcap and pmd_xenvirt in is_valid_wl_entry() as we want to be able to register external virtual drivers as a shared library. Moreover this code was duplicated with dev_types[] from eal_common_pci.c - eal_common_whitelist.c was badly named: it was able to process PCI devices white list and the registration of virtual devices - the parsing code was complex: all arguments were prepended in one string dev_list_str[4096], then split again Use the newly introduced rte_devargs to get: - the PCI white list - the PCI black list - the list of virtual devices Rework the tests: - a part of the whitelist test can be removed as it is now tested in app/test/test_devargs.c - the other parts are just reworked to adapt them to the new API This commit induce a small API modification: it is not possible to specify several devices per "--use-device" option. This notation was anyway a bit cryptic. Ex: --use-device="eth_ring0,eth_pcap0;iface=ixgbe0" now becomes: --use-device="eth_ring0" --use-device="eth_pcap0;iface=ixgbe0" On the other hand, it is now possible to work in PCI blacklist mode and instanciate virtual drivers, which was not possible before this patch. Test result: ./app/test -c 0x15 -n 3 -m 64 RTE>>devargs_autotest EAL: invalid PCI identifier <08:1> EAL: invalid PCI identifier <00.1> EAL: invalid PCI identifier <foo> EAL: invalid PCI identifier <> EAL: invalid PCI identifier <000f:0:0> Test OK Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-03-01 12:14:34 +00:00
#include <string.h>
#include <inttypes.h>
#include <stdint.h>
#include <stdlib.h>
#include <stdio.h>
#include <sys/queue.h>
#include <sys/mman.h>
#include <rte_interrupts.h>
#include <rte_log.h>
#include <rte_pci.h>
#include <rte_per_lcore.h>
#include <rte_memory.h>
#include <rte_memzone.h>
#include <rte_eal.h>
#include <rte_string_fns.h>
#include <rte_common.h>
devargs: use devargs for vdev and PCI whitelist/blacklist Remove old whitelist code: - remove references to rte_pmd_ring, rte_pmd_pcap and pmd_xenvirt in is_valid_wl_entry() as we want to be able to register external virtual drivers as a shared library. Moreover this code was duplicated with dev_types[] from eal_common_pci.c - eal_common_whitelist.c was badly named: it was able to process PCI devices white list and the registration of virtual devices - the parsing code was complex: all arguments were prepended in one string dev_list_str[4096], then split again Use the newly introduced rte_devargs to get: - the PCI white list - the PCI black list - the list of virtual devices Rework the tests: - a part of the whitelist test can be removed as it is now tested in app/test/test_devargs.c - the other parts are just reworked to adapt them to the new API This commit induce a small API modification: it is not possible to specify several devices per "--use-device" option. This notation was anyway a bit cryptic. Ex: --use-device="eth_ring0,eth_pcap0;iface=ixgbe0" now becomes: --use-device="eth_ring0" --use-device="eth_pcap0;iface=ixgbe0" On the other hand, it is now possible to work in PCI blacklist mode and instanciate virtual drivers, which was not possible before this patch. Test result: ./app/test -c 0x15 -n 3 -m 64 RTE>>devargs_autotest EAL: invalid PCI identifier <08:1> EAL: invalid PCI identifier <00.1> EAL: invalid PCI identifier <foo> EAL: invalid PCI identifier <> EAL: invalid PCI identifier <000f:0:0> Test OK Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-03-01 12:14:34 +00:00
#include <rte_devargs.h>
#include "eal_private.h"
struct pci_driver_list pci_driver_list;
struct pci_device_list pci_device_list;
#define SYSFS_PCI_DEVICES "/sys/bus/pci/devices"
const char *pci_get_sysfs_path(void)
{
const char *path = NULL;
path = getenv("SYSFS_PCI_DEVICES");
if (path == NULL)
return SYSFS_PCI_DEVICES;
return path;
}
static struct rte_devargs *pci_devargs_lookup(struct rte_pci_device *dev)
{
devargs: use devargs for vdev and PCI whitelist/blacklist Remove old whitelist code: - remove references to rte_pmd_ring, rte_pmd_pcap and pmd_xenvirt in is_valid_wl_entry() as we want to be able to register external virtual drivers as a shared library. Moreover this code was duplicated with dev_types[] from eal_common_pci.c - eal_common_whitelist.c was badly named: it was able to process PCI devices white list and the registration of virtual devices - the parsing code was complex: all arguments were prepended in one string dev_list_str[4096], then split again Use the newly introduced rte_devargs to get: - the PCI white list - the PCI black list - the list of virtual devices Rework the tests: - a part of the whitelist test can be removed as it is now tested in app/test/test_devargs.c - the other parts are just reworked to adapt them to the new API This commit induce a small API modification: it is not possible to specify several devices per "--use-device" option. This notation was anyway a bit cryptic. Ex: --use-device="eth_ring0,eth_pcap0;iface=ixgbe0" now becomes: --use-device="eth_ring0" --use-device="eth_pcap0;iface=ixgbe0" On the other hand, it is now possible to work in PCI blacklist mode and instanciate virtual drivers, which was not possible before this patch. Test result: ./app/test -c 0x15 -n 3 -m 64 RTE>>devargs_autotest EAL: invalid PCI identifier <08:1> EAL: invalid PCI identifier <00.1> EAL: invalid PCI identifier <foo> EAL: invalid PCI identifier <> EAL: invalid PCI identifier <000f:0:0> Test OK Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-03-01 12:14:34 +00:00
struct rte_devargs *devargs;
TAILQ_FOREACH(devargs, &devargs_list, next) {
if (devargs->type != RTE_DEVTYPE_BLACKLISTED_PCI &&
devargs->type != RTE_DEVTYPE_WHITELISTED_PCI)
devargs: use devargs for vdev and PCI whitelist/blacklist Remove old whitelist code: - remove references to rte_pmd_ring, rte_pmd_pcap and pmd_xenvirt in is_valid_wl_entry() as we want to be able to register external virtual drivers as a shared library. Moreover this code was duplicated with dev_types[] from eal_common_pci.c - eal_common_whitelist.c was badly named: it was able to process PCI devices white list and the registration of virtual devices - the parsing code was complex: all arguments were prepended in one string dev_list_str[4096], then split again Use the newly introduced rte_devargs to get: - the PCI white list - the PCI black list - the list of virtual devices Rework the tests: - a part of the whitelist test can be removed as it is now tested in app/test/test_devargs.c - the other parts are just reworked to adapt them to the new API This commit induce a small API modification: it is not possible to specify several devices per "--use-device" option. This notation was anyway a bit cryptic. Ex: --use-device="eth_ring0,eth_pcap0;iface=ixgbe0" now becomes: --use-device="eth_ring0" --use-device="eth_pcap0;iface=ixgbe0" On the other hand, it is now possible to work in PCI blacklist mode and instanciate virtual drivers, which was not possible before this patch. Test result: ./app/test -c 0x15 -n 3 -m 64 RTE>>devargs_autotest EAL: invalid PCI identifier <08:1> EAL: invalid PCI identifier <00.1> EAL: invalid PCI identifier <foo> EAL: invalid PCI identifier <> EAL: invalid PCI identifier <000f:0:0> Test OK Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-03-01 12:14:34 +00:00
continue;
if (!rte_eal_compare_pci_addr(&dev->addr, &devargs->pci.addr))
return devargs;
}
return NULL;
}
/* map a particular resource from a file */
void *
pci_map_resource(void *requested_addr, int fd, off_t offset, size_t size,
int additional_flags)
{
void *mapaddr;
/* Map the PCI memory resource of device */
mapaddr = mmap(requested_addr, size, PROT_READ | PROT_WRITE,
MAP_SHARED | additional_flags, fd, offset);
if (mapaddr == MAP_FAILED) {
RTE_LOG(ERR, EAL, "%s(): cannot mmap(%d, %p, 0x%lx, 0x%lx): %s (%p)\n",
__func__, fd, requested_addr,
(unsigned long)size, (unsigned long)offset,
strerror(errno), mapaddr);
} else
RTE_LOG(DEBUG, EAL, " PCI memory mapped at %p\n", mapaddr);
return mapaddr;
}
/* unmap a particular resource */
void
pci_unmap_resource(void *requested_addr, size_t size)
{
if (requested_addr == NULL)
return;
/* Unmap the PCI memory resource of device */
if (munmap(requested_addr, size)) {
RTE_LOG(ERR, EAL, "%s(): cannot munmap(%p, 0x%lx): %s\n",
__func__, requested_addr, (unsigned long)size,
strerror(errno));
} else
RTE_LOG(DEBUG, EAL, " PCI memory unmapped at %p\n",
requested_addr);
}
/*
* If vendor/device ID match, call the devinit() function of the
* driver.
*/
static int
rte_eal_pci_probe_one_driver(struct rte_pci_driver *dr, struct rte_pci_device *dev)
{
int ret;
const struct rte_pci_id *id_table;
for (id_table = dr->id_table; id_table->vendor_id != 0; id_table++) {
/* check if device's identifiers match the driver's ones */
if (id_table->vendor_id != dev->id.vendor_id &&
id_table->vendor_id != PCI_ANY_ID)
continue;
if (id_table->device_id != dev->id.device_id &&
id_table->device_id != PCI_ANY_ID)
continue;
if (id_table->subsystem_vendor_id != dev->id.subsystem_vendor_id &&
id_table->subsystem_vendor_id != PCI_ANY_ID)
continue;
if (id_table->subsystem_device_id != dev->id.subsystem_device_id &&
id_table->subsystem_device_id != PCI_ANY_ID)
continue;
if (id_table->class_id != dev->id.class_id &&
id_table->class_id != RTE_CLASS_ANY_ID)
continue;
struct rte_pci_addr *loc = &dev->addr;
RTE_LOG(INFO, EAL, "PCI device "PCI_PRI_FMT" on NUMA socket %i\n",
loc->domain, loc->bus, loc->devid, loc->function,
dev->numa_node);
/* no initialization when blacklisted, return without error */
if (dev->devargs != NULL &&
dev->devargs->type == RTE_DEVTYPE_BLACKLISTED_PCI) {
RTE_LOG(INFO, EAL, " Device is blacklisted, not initializing\n");
return 1;
}
RTE_LOG(INFO, EAL, " probe driver: %x:%x %s\n", dev->id.vendor_id,
dev->id.device_id, dr->name);
if (dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING) {
/* map resources for devices that use igb_uio */
ret = rte_eal_pci_map_device(dev);
if (ret != 0)
return ret;
} else if (dr->drv_flags & RTE_PCI_DRV_FORCE_UNBIND &&
rte_eal_process_type() == RTE_PROC_PRIMARY) {
/* unbind current driver */
if (pci_unbind_kernel_driver(dev) < 0)
return -1;
}
/* reference driver structure */
dev->driver = dr;
/* call the driver devinit() function */
return dr->devinit(dr, dev);
}
/* return positive value if driver doesn't support this device */
return 1;
}
/*
* If vendor/device ID match, call the devuninit() function of the
* driver.
*/
static int
rte_eal_pci_detach_dev(struct rte_pci_driver *dr,
struct rte_pci_device *dev)
{
const struct rte_pci_id *id_table;
if ((dr == NULL) || (dev == NULL))
return -EINVAL;
for (id_table = dr->id_table; id_table->vendor_id != 0; id_table++) {
/* check if device's identifiers match the driver's ones */
if (id_table->vendor_id != dev->id.vendor_id &&
id_table->vendor_id != PCI_ANY_ID)
continue;
if (id_table->device_id != dev->id.device_id &&
id_table->device_id != PCI_ANY_ID)
continue;
if (id_table->subsystem_vendor_id != dev->id.subsystem_vendor_id &&
id_table->subsystem_vendor_id != PCI_ANY_ID)
continue;
if (id_table->subsystem_device_id != dev->id.subsystem_device_id &&
id_table->subsystem_device_id != PCI_ANY_ID)
continue;
struct rte_pci_addr *loc = &dev->addr;
RTE_LOG(DEBUG, EAL, "PCI device "PCI_PRI_FMT" on NUMA socket %i\n",
loc->domain, loc->bus, loc->devid,
loc->function, dev->numa_node);
RTE_LOG(DEBUG, EAL, " remove driver: %x:%x %s\n", dev->id.vendor_id,
dev->id.device_id, dr->name);
if (dr->devuninit && (dr->devuninit(dev) < 0))
return -1; /* negative value is an error */
/* clear driver structure */
dev->driver = NULL;
if (dr->drv_flags & RTE_PCI_DRV_NEED_MAPPING)
/* unmap resources for devices that use igb_uio */
rte_eal_pci_unmap_device(dev);
return 0;
}
/* return positive value if driver doesn't support this device */
return 1;
}
/*
* If vendor/device ID match, call the devinit() function of all
* registered driver for the given device. Return -1 if initialization
* failed, return 1 if no driver is found for this device.
*/
static int
pci_probe_all_drivers(struct rte_pci_device *dev)
{
struct rte_pci_driver *dr = NULL;
int rc = 0;
if (dev == NULL)
return -1;
TAILQ_FOREACH(dr, &pci_driver_list, next) {
rc = rte_eal_pci_probe_one_driver(dr, dev);
if (rc < 0)
/* negative value is an error */
return -1;
if (rc > 0)
/* positive value means driver doesn't support it */
continue;
return 0;
}
return 1;
}
/*
* If vendor/device ID match, call the devuninit() function of all
* registered driver for the given device. Return -1 if initialization
* failed, return 1 if no driver is found for this device.
*/
static int
pci_detach_all_drivers(struct rte_pci_device *dev)
{
struct rte_pci_driver *dr = NULL;
int rc = 0;
if (dev == NULL)
return -1;
TAILQ_FOREACH(dr, &pci_driver_list, next) {
rc = rte_eal_pci_detach_dev(dr, dev);
if (rc < 0)
/* negative value is an error */
return -1;
if (rc > 0)
/* positive value means driver doesn't support it */
continue;
return 0;
}
return 1;
}
/*
* Find the pci device specified by pci address, then invoke probe function of
* the driver of the devive.
*/
int
rte_eal_pci_probe_one(const struct rte_pci_addr *addr)
{
struct rte_pci_device *dev = NULL;
int ret = 0;
if (addr == NULL)
return -1;
TAILQ_FOREACH(dev, &pci_device_list, next) {
if (rte_eal_compare_pci_addr(&dev->addr, addr))
continue;
ret = pci_probe_all_drivers(dev);
if (ret < 0)
goto err_return;
return 0;
}
return -1;
err_return:
RTE_LOG(WARNING, EAL, "Requested device " PCI_PRI_FMT
" cannot be used\n", dev->addr.domain, dev->addr.bus,
dev->addr.devid, dev->addr.function);
return -1;
}
/*
* Detach device specified by its pci address.
*/
int
rte_eal_pci_detach(const struct rte_pci_addr *addr)
{
struct rte_pci_device *dev = NULL;
int ret = 0;
if (addr == NULL)
return -1;
TAILQ_FOREACH(dev, &pci_device_list, next) {
if (rte_eal_compare_pci_addr(&dev->addr, addr))
continue;
ret = pci_detach_all_drivers(dev);
if (ret < 0)
goto err_return;
TAILQ_REMOVE(&pci_device_list, dev, next);
return 0;
}
return -1;
err_return:
RTE_LOG(WARNING, EAL, "Requested device " PCI_PRI_FMT
" cannot be used\n", dev->addr.domain, dev->addr.bus,
dev->addr.devid, dev->addr.function);
return -1;
}
/*
* Scan the content of the PCI bus, and call the devinit() function for
* all registered drivers that have a matching entry in its id_table
* for discovered devices.
*/
int
rte_eal_pci_probe(void)
{
struct rte_pci_device *dev = NULL;
struct rte_devargs *devargs;
devargs: use devargs for vdev and PCI whitelist/blacklist Remove old whitelist code: - remove references to rte_pmd_ring, rte_pmd_pcap and pmd_xenvirt in is_valid_wl_entry() as we want to be able to register external virtual drivers as a shared library. Moreover this code was duplicated with dev_types[] from eal_common_pci.c - eal_common_whitelist.c was badly named: it was able to process PCI devices white list and the registration of virtual devices - the parsing code was complex: all arguments were prepended in one string dev_list_str[4096], then split again Use the newly introduced rte_devargs to get: - the PCI white list - the PCI black list - the list of virtual devices Rework the tests: - a part of the whitelist test can be removed as it is now tested in app/test/test_devargs.c - the other parts are just reworked to adapt them to the new API This commit induce a small API modification: it is not possible to specify several devices per "--use-device" option. This notation was anyway a bit cryptic. Ex: --use-device="eth_ring0,eth_pcap0;iface=ixgbe0" now becomes: --use-device="eth_ring0" --use-device="eth_pcap0;iface=ixgbe0" On the other hand, it is now possible to work in PCI blacklist mode and instanciate virtual drivers, which was not possible before this patch. Test result: ./app/test -c 0x15 -n 3 -m 64 RTE>>devargs_autotest EAL: invalid PCI identifier <08:1> EAL: invalid PCI identifier <00.1> EAL: invalid PCI identifier <foo> EAL: invalid PCI identifier <> EAL: invalid PCI identifier <000f:0:0> Test OK Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-03-01 12:14:34 +00:00
int probe_all = 0;
int ret = 0;
devargs: use devargs for vdev and PCI whitelist/blacklist Remove old whitelist code: - remove references to rte_pmd_ring, rte_pmd_pcap and pmd_xenvirt in is_valid_wl_entry() as we want to be able to register external virtual drivers as a shared library. Moreover this code was duplicated with dev_types[] from eal_common_pci.c - eal_common_whitelist.c was badly named: it was able to process PCI devices white list and the registration of virtual devices - the parsing code was complex: all arguments were prepended in one string dev_list_str[4096], then split again Use the newly introduced rte_devargs to get: - the PCI white list - the PCI black list - the list of virtual devices Rework the tests: - a part of the whitelist test can be removed as it is now tested in app/test/test_devargs.c - the other parts are just reworked to adapt them to the new API This commit induce a small API modification: it is not possible to specify several devices per "--use-device" option. This notation was anyway a bit cryptic. Ex: --use-device="eth_ring0,eth_pcap0;iface=ixgbe0" now becomes: --use-device="eth_ring0" --use-device="eth_pcap0;iface=ixgbe0" On the other hand, it is now possible to work in PCI blacklist mode and instanciate virtual drivers, which was not possible before this patch. Test result: ./app/test -c 0x15 -n 3 -m 64 RTE>>devargs_autotest EAL: invalid PCI identifier <08:1> EAL: invalid PCI identifier <00.1> EAL: invalid PCI identifier <foo> EAL: invalid PCI identifier <> EAL: invalid PCI identifier <000f:0:0> Test OK Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-03-01 12:14:34 +00:00
if (rte_eal_devargs_type_count(RTE_DEVTYPE_WHITELISTED_PCI) == 0)
probe_all = 1;
TAILQ_FOREACH(dev, &pci_device_list, next) {
/* set devargs in PCI structure */
devargs = pci_devargs_lookup(dev);
if (devargs != NULL)
dev->devargs = devargs;
/* probe all or only whitelisted devices */
devargs: use devargs for vdev and PCI whitelist/blacklist Remove old whitelist code: - remove references to rte_pmd_ring, rte_pmd_pcap and pmd_xenvirt in is_valid_wl_entry() as we want to be able to register external virtual drivers as a shared library. Moreover this code was duplicated with dev_types[] from eal_common_pci.c - eal_common_whitelist.c was badly named: it was able to process PCI devices white list and the registration of virtual devices - the parsing code was complex: all arguments were prepended in one string dev_list_str[4096], then split again Use the newly introduced rte_devargs to get: - the PCI white list - the PCI black list - the list of virtual devices Rework the tests: - a part of the whitelist test can be removed as it is now tested in app/test/test_devargs.c - the other parts are just reworked to adapt them to the new API This commit induce a small API modification: it is not possible to specify several devices per "--use-device" option. This notation was anyway a bit cryptic. Ex: --use-device="eth_ring0,eth_pcap0;iface=ixgbe0" now becomes: --use-device="eth_ring0" --use-device="eth_pcap0;iface=ixgbe0" On the other hand, it is now possible to work in PCI blacklist mode and instanciate virtual drivers, which was not possible before this patch. Test result: ./app/test -c 0x15 -n 3 -m 64 RTE>>devargs_autotest EAL: invalid PCI identifier <08:1> EAL: invalid PCI identifier <00.1> EAL: invalid PCI identifier <foo> EAL: invalid PCI identifier <> EAL: invalid PCI identifier <000f:0:0> Test OK Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-03-01 12:14:34 +00:00
if (probe_all)
ret = pci_probe_all_drivers(dev);
else if (devargs != NULL &&
devargs->type == RTE_DEVTYPE_WHITELISTED_PCI)
ret = pci_probe_all_drivers(dev);
if (ret < 0)
devargs: use devargs for vdev and PCI whitelist/blacklist Remove old whitelist code: - remove references to rte_pmd_ring, rte_pmd_pcap and pmd_xenvirt in is_valid_wl_entry() as we want to be able to register external virtual drivers as a shared library. Moreover this code was duplicated with dev_types[] from eal_common_pci.c - eal_common_whitelist.c was badly named: it was able to process PCI devices white list and the registration of virtual devices - the parsing code was complex: all arguments were prepended in one string dev_list_str[4096], then split again Use the newly introduced rte_devargs to get: - the PCI white list - the PCI black list - the list of virtual devices Rework the tests: - a part of the whitelist test can be removed as it is now tested in app/test/test_devargs.c - the other parts are just reworked to adapt them to the new API This commit induce a small API modification: it is not possible to specify several devices per "--use-device" option. This notation was anyway a bit cryptic. Ex: --use-device="eth_ring0,eth_pcap0;iface=ixgbe0" now becomes: --use-device="eth_ring0" --use-device="eth_pcap0;iface=ixgbe0" On the other hand, it is now possible to work in PCI blacklist mode and instanciate virtual drivers, which was not possible before this patch. Test result: ./app/test -c 0x15 -n 3 -m 64 RTE>>devargs_autotest EAL: invalid PCI identifier <08:1> EAL: invalid PCI identifier <00.1> EAL: invalid PCI identifier <foo> EAL: invalid PCI identifier <> EAL: invalid PCI identifier <000f:0:0> Test OK Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-03-01 12:14:34 +00:00
rte_exit(EXIT_FAILURE, "Requested device " PCI_PRI_FMT
" cannot be used\n", dev->addr.domain, dev->addr.bus,
dev->addr.devid, dev->addr.function);
}
return 0;
}
/* dump one device */
static int
pci_dump_one_device(FILE *f, struct rte_pci_device *dev)
{
int i;
fprintf(f, PCI_PRI_FMT, dev->addr.domain, dev->addr.bus,
dev->addr.devid, dev->addr.function);
fprintf(f, " - vendor:%x device:%x\n", dev->id.vendor_id,
dev->id.device_id);
for (i = 0; i != sizeof(dev->mem_resource) /
sizeof(dev->mem_resource[0]); i++) {
fprintf(f, " %16.16"PRIx64" %16.16"PRIx64"\n",
dev->mem_resource[i].phys_addr,
dev->mem_resource[i].len);
}
return 0;
}
/* dump devices on the bus */
void
rte_eal_pci_dump(FILE *f)
{
struct rte_pci_device *dev = NULL;
TAILQ_FOREACH(dev, &pci_device_list, next) {
pci_dump_one_device(f, dev);
}
}
/* register a driver */
void
rte_eal_pci_register(struct rte_pci_driver *driver)
{
TAILQ_INSERT_TAIL(&pci_driver_list, driver, next);
}
/* unregister a driver */
void
rte_eal_pci_unregister(struct rte_pci_driver *driver)
{
TAILQ_REMOVE(&pci_driver_list, driver, next);
}