numam-dpdk/app/test-crypto-perf/cperf_test_vectors.c

537 lines
30 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright(c) 2016-2017 Intel Corporation
*/
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
#include <rte_crypto.h>
#include <rte_malloc.h>
#include "cperf_test_vectors.h"
uint8_t plaintext[2048] = {
0x71, 0x75, 0x83, 0x98, 0x75, 0x42, 0x51, 0x09, 0x94, 0x02, 0x13, 0x20,
0x15, 0x64, 0x46, 0x32, 0x08, 0x18, 0x91, 0x82, 0x86, 0x52, 0x23, 0x93,
0x44, 0x54, 0x28, 0x68, 0x78, 0x78, 0x70, 0x06, 0x42, 0x74, 0x41, 0x27,
0x73, 0x38, 0x53, 0x77, 0x51, 0x96, 0x53, 0x24, 0x03, 0x88, 0x74, 0x14,
0x70, 0x23, 0x88, 0x30, 0x85, 0x18, 0x89, 0x27, 0x41, 0x71, 0x61, 0x23,
0x04, 0x83, 0x30, 0x57, 0x26, 0x47, 0x23, 0x75, 0x25, 0x62, 0x53, 0x80,
0x38, 0x34, 0x21, 0x33, 0x34, 0x51, 0x46, 0x29, 0x94, 0x64, 0x22, 0x67,
0x25, 0x45, 0x70, 0x26, 0x74, 0x39, 0x46, 0x71, 0x08, 0x85, 0x27, 0x18,
0x93, 0x39, 0x72, 0x11, 0x57, 0x26, 0x88, 0x46, 0x47, 0x49, 0x86, 0x92,
0x03, 0x37, 0x96, 0x40, 0x84, 0x53, 0x67, 0x47, 0x60, 0x60, 0x37, 0x67,
0x02, 0x68, 0x76, 0x62, 0x42, 0x01, 0x59, 0x11, 0x01, 0x89, 0x40, 0x87,
0x58, 0x20, 0x51, 0x21, 0x66, 0x26, 0x26, 0x73, 0x03, 0x06, 0x14, 0x25,
0x98, 0x42, 0x44, 0x67, 0x24, 0x78, 0x71, 0x45, 0x32, 0x61, 0x20, 0x26,
0x08, 0x88, 0x44, 0x26, 0x40, 0x63, 0x76, 0x23, 0x78, 0x55, 0x81, 0x97,
0x95, 0x89, 0x39, 0x07, 0x14, 0x50, 0x50, 0x73, 0x07, 0x20, 0x86, 0x83,
0x74, 0x57, 0x72, 0x36, 0x68, 0x61, 0x14, 0x41, 0x56, 0x49, 0x64, 0x72,
0x75, 0x81, 0x47, 0x91, 0x08, 0x76, 0x47, 0x06, 0x55, 0x77, 0x61, 0x45,
0x50, 0x10, 0x07, 0x46, 0x46, 0x89, 0x80, 0x07, 0x24, 0x95, 0x39, 0x43,
0x03, 0x75, 0x24, 0x35, 0x57, 0x82, 0x09, 0x64, 0x29, 0x24, 0x26, 0x66,
0x67, 0x29, 0x05, 0x90, 0x82, 0x02, 0x45, 0x71, 0x21, 0x34, 0x25, 0x48,
0x68, 0x26, 0x01, 0x18, 0x73, 0x18, 0x46, 0x15, 0x14, 0x33, 0x28, 0x44,
0x24, 0x82, 0x20, 0x12, 0x99, 0x43, 0x68, 0x43, 0x25, 0x14, 0x34, 0x33,
0x31, 0x13, 0x77, 0x44, 0x95, 0x22, 0x99, 0x02, 0x30, 0x50, 0x74, 0x43,
0x81, 0x78, 0x32, 0x17, 0x09, 0x85, 0x04, 0x37, 0x31, 0x98, 0x76, 0x79,
0x64, 0x10, 0x39, 0x89, 0x59, 0x90, 0x50, 0x15, 0x77, 0x39, 0x28, 0x14,
0x30, 0x19, 0x68, 0x77, 0x89, 0x48, 0x86, 0x16, 0x11, 0x33, 0x84, 0x56,
0x10, 0x20, 0x94, 0x72, 0x41, 0x69, 0x13, 0x00, 0x56, 0x27, 0x01, 0x57,
0x46, 0x65, 0x65, 0x19, 0x33, 0x07, 0x62, 0x19, 0x91, 0x60, 0x29, 0x11,
0x41, 0x25, 0x88, 0x21, 0x93, 0x85, 0x87, 0x40, 0x91, 0x25, 0x32, 0x86,
0x76, 0x54, 0x92, 0x52, 0x72, 0x46, 0x61, 0x84, 0x20, 0x14, 0x65, 0x83,
0x69, 0x90, 0x80, 0x11, 0x35, 0x70, 0x42, 0x64, 0x74, 0x85, 0x15, 0x23,
0x06, 0x55, 0x67, 0x49, 0x76, 0x47, 0x11, 0x95, 0x00, 0x85, 0x05, 0x12,
0x58, 0x53, 0x25, 0x73, 0x62, 0x81, 0x63, 0x82, 0x32, 0x75, 0x16, 0x48,
0x04, 0x96, 0x75, 0x16, 0x43, 0x83, 0x41, 0x85, 0x95, 0x67, 0x27, 0x83,
0x22, 0x43, 0x02, 0x27, 0x69, 0x62, 0x78, 0x50, 0x57, 0x66, 0x99, 0x89,
0x05, 0x06, 0x35, 0x86, 0x37, 0x27, 0x48, 0x46, 0x50, 0x80, 0x96, 0x40,
0x42, 0x36, 0x21, 0x54, 0x49, 0x18, 0x63, 0x38, 0x45, 0x76, 0x23, 0x20,
0x28, 0x06, 0x17, 0x32, 0x58, 0x50, 0x49, 0x54, 0x29, 0x46, 0x18, 0x12,
0x17, 0x50, 0x02, 0x80, 0x99, 0x53, 0x15, 0x02, 0x07, 0x14, 0x19, 0x60,
0x56, 0x43, 0x76, 0x71, 0x49, 0x99, 0x54, 0x83, 0x28, 0x94, 0x30, 0x30,
0x57, 0x05, 0x89, 0x80, 0x11, 0x03, 0x78, 0x35, 0x73, 0x52, 0x67, 0x39,
0x67, 0x07, 0x04, 0x49, 0x23, 0x83, 0x86, 0x89, 0x57, 0x71, 0x08, 0x41,
0x15, 0x97, 0x19, 0x72, 0x03, 0x27, 0x72, 0x52, 0x66, 0x67, 0x99, 0x15,
0x33, 0x64, 0x69, 0x78, 0x07, 0x83, 0x53, 0x71, 0x21, 0x50, 0x05, 0x48,
0x59, 0x85, 0x01, 0x36, 0x65, 0x02, 0x52, 0x01, 0x09, 0x49, 0x28, 0x77,
0x25, 0x35, 0x67, 0x77, 0x81, 0x64, 0x24, 0x29, 0x42, 0x32, 0x59, 0x22,
0x93, 0x48, 0x59, 0x03, 0x85, 0x87, 0x15, 0x55, 0x23, 0x42, 0x58, 0x17,
0x18, 0x37, 0x70, 0x83, 0x80, 0x12, 0x44, 0x83, 0x45, 0x70, 0x55, 0x86,
0x03, 0x23, 0x01, 0x56, 0x94, 0x12, 0x41, 0x34, 0x82, 0x90, 0x83, 0x46,
0x17, 0x56, 0x66, 0x96, 0x75, 0x80, 0x59, 0x07, 0x15, 0x84, 0x19, 0x52,
0x37, 0x44, 0x44, 0x83, 0x72, 0x43, 0x25, 0x42, 0x26, 0x86, 0x87, 0x86,
0x91, 0x62, 0x14, 0x90, 0x34, 0x26, 0x14, 0x33, 0x59, 0x70, 0x73, 0x15,
0x49, 0x40, 0x66, 0x88, 0x42, 0x66, 0x16, 0x42, 0x55, 0x92, 0x82, 0x06,
0x20, 0x96, 0x36, 0x96, 0x13, 0x07, 0x84, 0x94, 0x37, 0x66, 0x62, 0x78,
0x60, 0x58, 0x80, 0x50, 0x69, 0x03, 0x97, 0x16, 0x64, 0x45, 0x21, 0x39,
0x79, 0x28, 0x52, 0x17, 0x14, 0x77, 0x31, 0x60, 0x86, 0x70, 0x09, 0x53,
0x39, 0x32, 0x52, 0x31, 0x35, 0x79, 0x24, 0x70, 0x25, 0x48, 0x23, 0x49,
0x10, 0x64, 0x54, 0x30, 0x82, 0x34, 0x51, 0x20, 0x46, 0x04, 0x29, 0x25,
0x65, 0x09, 0x55, 0x30, 0x30, 0x52, 0x85, 0x32, 0x79, 0x19, 0x59, 0x07,
0x05, 0x12, 0x11, 0x03, 0x21, 0x90, 0x36, 0x62, 0x23, 0x67, 0x36, 0x67,
0x47, 0x39, 0x92, 0x88, 0x45, 0x43, 0x71, 0x16, 0x48, 0x27, 0x68, 0x39,
0x98, 0x38, 0x03, 0x31, 0x85, 0x10, 0x06, 0x95, 0x54, 0x79, 0x28, 0x79,
0x56, 0x16, 0x65, 0x69, 0x00, 0x54, 0x09, 0x91, 0x06, 0x10, 0x10, 0x86,
0x75, 0x01, 0x02, 0x71, 0x01, 0x09, 0x32, 0x94, 0x66, 0x43, 0x68, 0x36,
0x19, 0x52, 0x02, 0x04, 0x45, 0x49, 0x40, 0x94, 0x07, 0x87, 0x86, 0x79,
0x84, 0x07, 0x75, 0x30, 0x73, 0x02, 0x57, 0x81, 0x65, 0x02, 0x28, 0x96,
0x57, 0x07, 0x70, 0x34, 0x39, 0x35, 0x75, 0x19, 0x47, 0x57, 0x08, 0x75,
0x86, 0x57, 0x11, 0x32, 0x09, 0x47, 0x83, 0x93, 0x20, 0x94, 0x90, 0x88,
0x39, 0x63, 0x22, 0x88, 0x54, 0x54, 0x95, 0x75, 0x67, 0x26, 0x02, 0x49,
0x26, 0x17, 0x35, 0x16, 0x27, 0x65, 0x64, 0x26, 0x93, 0x92, 0x77, 0x85,
0x84, 0x40, 0x59, 0x29, 0x49, 0x69, 0x94, 0x71, 0x72, 0x21, 0x55, 0x03,
0x19, 0x74, 0x09, 0x40, 0x57, 0x68, 0x41, 0x19, 0x11, 0x21, 0x63, 0x56,
0x29, 0x77, 0x57, 0x81, 0x44, 0x40, 0x76, 0x77, 0x02, 0x71, 0x66, 0x35,
0x89, 0x02, 0x64, 0x51, 0x61, 0x02, 0x46, 0x91, 0x38, 0x93, 0x62, 0x57,
0x18, 0x98, 0x12, 0x87, 0x29, 0x48, 0x65, 0x39, 0x99, 0x45, 0x54, 0x69,
0x51, 0x16, 0x25, 0x75, 0x60, 0x70, 0x33, 0x72, 0x01, 0x60, 0x26, 0x51,
0x44, 0x14, 0x39, 0x12, 0x95, 0x48, 0x87, 0x33, 0x90, 0x16, 0x42, 0x78,
0x48, 0x58, 0x96, 0x93, 0x75, 0x23, 0x07, 0x13, 0x86, 0x07, 0x96, 0x30,
0x22, 0x82, 0x91, 0x36, 0x72, 0x16, 0x48, 0x77, 0x64, 0x99, 0x07, 0x34,
0x78, 0x60, 0x61, 0x13, 0x48, 0x93, 0x46, 0x62, 0x48, 0x38, 0x37, 0x96,
0x58, 0x64, 0x39, 0x90, 0x69, 0x46, 0x81, 0x98, 0x61, 0x89, 0x15, 0x59,
0x78, 0x98, 0x21, 0x34, 0x00, 0x69, 0x97, 0x80, 0x28, 0x81, 0x53, 0x49,
0x79, 0x53, 0x92, 0x20, 0x29, 0x40, 0x70, 0x06, 0x09, 0x55, 0x99, 0x41,
0x51, 0x35, 0x55, 0x27, 0x39, 0x06, 0x29, 0x83, 0x66, 0x03, 0x68, 0x14,
0x11, 0x69, 0x95, 0x51, 0x71, 0x55, 0x24, 0x60, 0x52, 0x58, 0x88, 0x11,
0x88, 0x25, 0x37, 0x86, 0x01, 0x52, 0x93, 0x52, 0x02, 0x24, 0x91, 0x58,
0x56, 0x37, 0x50, 0x88, 0x39, 0x09, 0x61, 0x19, 0x08, 0x86, 0x29, 0x51,
0x63, 0x38, 0x81, 0x14, 0x75, 0x75, 0x39, 0x99, 0x22, 0x04, 0x32, 0x63,
0x14, 0x68, 0x41, 0x79, 0x09, 0x57, 0x87, 0x29, 0x26, 0x94, 0x05, 0x71,
0x82, 0x41, 0x26, 0x98, 0x68, 0x18, 0x55, 0x42, 0x78, 0x05, 0x74, 0x17,
0x34, 0x34, 0x07, 0x62, 0x94, 0x72, 0x21, 0x08, 0x54, 0x72, 0x21, 0x08,
0x31, 0x53, 0x82, 0x35, 0x27, 0x40, 0x85, 0x77, 0x08, 0x52, 0x58, 0x48,
0x03, 0x86, 0x65, 0x51, 0x96, 0x43, 0x89, 0x19, 0x15, 0x08, 0x49, 0x62,
0x57, 0x46, 0x17, 0x68, 0x56, 0x04, 0x70, 0x63, 0x75, 0x88, 0x13, 0x27,
0x87, 0x44, 0x46, 0x27, 0x02, 0x97, 0x71, 0x07, 0x40, 0x17, 0x24, 0x61,
0x16, 0x94, 0x86, 0x85, 0x67, 0x58, 0x87, 0x92, 0x02, 0x84, 0x75, 0x19,
0x43, 0x60, 0x68, 0x03, 0x54, 0x75, 0x33, 0x17, 0x97, 0x75, 0x12, 0x62,
0x43, 0x08, 0x35, 0x75, 0x32, 0x21, 0x08, 0x82, 0x78, 0x04, 0x74, 0x09,
0x13, 0x48, 0x63, 0x68, 0x67, 0x09, 0x08, 0x50, 0x11, 0x71, 0x64, 0x72,
0x63, 0x76, 0x21, 0x62, 0x80, 0x57, 0x19, 0x15, 0x26, 0x88, 0x02, 0x26,
0x83, 0x17, 0x61, 0x76, 0x28, 0x10, 0x22, 0x37, 0x56, 0x71, 0x51, 0x60,
0x12, 0x79, 0x24, 0x83, 0x78, 0x47, 0x78, 0x20, 0x52, 0x27, 0x19, 0x88,
0x81, 0x04, 0x70, 0x20, 0x25, 0x10, 0x04, 0x01, 0x72, 0x57, 0x30, 0x93,
0x96, 0x23, 0x02, 0x94, 0x61, 0x44, 0x17, 0x65, 0x77, 0x60, 0x27, 0x43,
0x24, 0x59, 0x46, 0x76, 0x00, 0x11, 0x31, 0x99, 0x41, 0x48, 0x75, 0x32,
0x05, 0x15, 0x45, 0x31, 0x57, 0x89, 0x10, 0x47, 0x53, 0x14, 0x66, 0x54,
0x60, 0x55, 0x36, 0x93, 0x30, 0x03, 0x63, 0x80, 0x65, 0x43, 0x17, 0x36,
0x18, 0x64, 0x21, 0x38, 0x16, 0x19, 0x19, 0x51, 0x73, 0x80, 0x38, 0x27,
0x30, 0x89, 0x13, 0x43, 0x54, 0x11, 0x78, 0x05, 0x24, 0x38, 0x83, 0x56,
0x50, 0x59, 0x12, 0x47, 0x69, 0x70, 0x70, 0x91, 0x28, 0x02, 0x08, 0x91,
0x66, 0x09, 0x31, 0x65, 0x46, 0x20, 0x04, 0x85, 0x89, 0x53, 0x91, 0x42,
0x34, 0x09, 0x36, 0x92, 0x42, 0x06, 0x87, 0x88, 0x23, 0x54, 0x87, 0x85,
0x52, 0x98, 0x95, 0x76, 0x13, 0x50, 0x59, 0x89, 0x18, 0x14, 0x17, 0x47,
0x10, 0x97, 0x39, 0x14, 0x33, 0x79, 0x83, 0x62, 0x55, 0x18, 0x30, 0x83,
0x03, 0x45, 0x38, 0x37, 0x35, 0x20, 0x94, 0x84, 0x89, 0x80, 0x89, 0x10,
0x48, 0x77, 0x33, 0x36, 0x50, 0x07, 0x93, 0x02, 0x45, 0x42, 0x91, 0x12,
0x98, 0x09, 0x77, 0x20, 0x31, 0x95, 0x10, 0x29, 0x89, 0x02, 0x38, 0x92,
0x90, 0x19, 0x51, 0x10, 0x19, 0x82, 0x23, 0x68, 0x06, 0x00, 0x67, 0x50,
0x25, 0x03, 0x41, 0x69, 0x53, 0x42, 0x23, 0x99, 0x29, 0x21, 0x63, 0x22,
0x72, 0x54, 0x72, 0x40, 0x23, 0x39, 0x74, 0x92, 0x53, 0x28, 0x67, 0x56,
0x46, 0x84, 0x59, 0x85, 0x10, 0x92, 0x31, 0x20, 0x39, 0x95, 0x65, 0x15,
0x76, 0x35, 0x37, 0x21, 0x98, 0x41, 0x68, 0x74, 0x94, 0x94, 0x86, 0x90,
0x35, 0x07, 0x06, 0x38, 0x78, 0x32, 0x00, 0x60, 0x86, 0x12, 0x34, 0x65,
0x67, 0x35, 0x76, 0x94, 0x78, 0x22, 0x99, 0x42, 0x82, 0x40, 0x05, 0x74,
0x18, 0x59, 0x03, 0x83, 0x89, 0x05, 0x19, 0x28, 0x88, 0x35, 0x59, 0x10,
0x12, 0x96, 0x48, 0x67, 0x59, 0x87, 0x26, 0x85, 0x74, 0x64, 0x78, 0x56,
0x91, 0x81, 0x45, 0x90, 0x21, 0x80, 0x32, 0x19, 0x61, 0x38, 0x61, 0x70,
0x35, 0x08, 0x93, 0x53, 0x21, 0x95, 0x08, 0x27, 0x90, 0x28, 0x94, 0x27,
0x35, 0x78, 0x03, 0x57, 0x74, 0x84, 0x73, 0x63, 0x27, 0x98, 0x14, 0x21,
0x22, 0x36, 0x75, 0x31, 0x81, 0x65, 0x85, 0x51, 0x02, 0x45, 0x18, 0x06,
0x39, 0x13, 0x29, 0x29, 0x73, 0x26, 0x99, 0x51, 0x38, 0x43, 0x35, 0x58,
0x70, 0x92, 0x32, 0x13, 0x80, 0x16, 0x26, 0x44, 0x22, 0x28, 0x05, 0x45,
0x86, 0x90, 0x38, 0x19, 0x40, 0x06, 0x30, 0x56, 0x94, 0x09, 0x02, 0x02,
0x96, 0x29, 0x22, 0x44, 0x87, 0x38, 0x09, 0x95, 0x58, 0x46, 0x42, 0x78,
0x72, 0x77, 0x86, 0x31, 0x97, 0x19, 0x86, 0x51, 0x73, 0x76, 0x63, 0x98,
0x39, 0x40, 0x20, 0x20, 0x67, 0x42, 0x55, 0x50, 0x63, 0x76, 0x81, 0x87,
0x13, 0x81, 0x19, 0x54, 0x11, 0x77, 0x90, 0x26, 0x47, 0x25, 0x92, 0x88,
0x18, 0x56, 0x23, 0x73, 0x91, 0x52, 0x39, 0x08, 0x59, 0x51, 0x81, 0x57,
0x78, 0x17, 0x13, 0x90, 0x90, 0x50, 0x65, 0x59, 0x99, 0x77, 0x42, 0x28,
0x21, 0x59, 0x97, 0x64, 0x25, 0x17, 0x92, 0x24, 0x50, 0x00, 0x28, 0x40,
0x85, 0x33, 0x78, 0x86, 0x79, 0x40, 0x28, 0x30, 0x14, 0x12, 0x01, 0x72,
0x41, 0x43, 0x06, 0x87, 0x67, 0x31, 0x66, 0x77, 0x07, 0x50, 0x55, 0x50,
0x22, 0x80, 0x42, 0x06, 0x38, 0x01, 0x63, 0x66, 0x70, 0x12, 0x52, 0x91,
0x90, 0x97, 0x21, 0x28, 0x22, 0x65, 0x02, 0x80, 0x72, 0x31, 0x17, 0x76,
0x35, 0x16, 0x03, 0x56, 0x59, 0x93, 0x36, 0x37, 0x67, 0x54, 0x46, 0x87,
0x29, 0x01, 0x30, 0x80, 0x47, 0x47, 0x31, 0x98, 0x34, 0x30, 0x23, 0x86,
0x86, 0x14, 0x05, 0x75, 0x09, 0x88, 0x77, 0x92, 0x59, 0x43, 0x98, 0x72,
0x55, 0x54, 0x25, 0x59, 0x22, 0x27, 0x21, 0x62, 0x97, 0x10, 0x61, 0x73,
0x86, 0x95, 0x99, 0x10, 0x62, 0x35, 0x25, 0x16, 0x62, 0x60, 0x51, 0x48,
0x69, 0x69, 0x92, 0x27, 0x19, 0x43, 0x40, 0x52, 0x70, 0x23, 0x37, 0x28,
0x73, 0x10, 0x32, 0x55, 0x85, 0x46, 0x97, 0x59, 0x88, 0x48, 0x54, 0x06,
0x58, 0x04, 0x82, 0x98, 0x88, 0x34, 0x05, 0x41, 0x94, 0x44, 0x35, 0x10,
0x96, 0x48, 0x21, 0x17, 0x24, 0x40, 0x26, 0x15, 0x49, 0x28, 0x12, 0x17,
0x10, 0x17, 0x91, 0x42, 0x84, 0x15, 0x83, 0x36, 0x29, 0x49, 0x92, 0x77,
0x74, 0x11, 0x72, 0x97, 0x64, 0x53, 0x23, 0x29, 0x16, 0x35, 0x22, 0x10,
0x87, 0x07, 0x44, 0x78, 0x18, 0x19, 0x79, 0x03, 0x58, 0x24, 0x15, 0x63,
0x55, 0x75, 0x56, 0x14, 0x63, 0x65, 0x86, 0x61, 0x92, 0x94, 0x30, 0x92,
0x69, 0x78, 0x40, 0x95, 0x19, 0x81, 0x41, 0x66, 0x97, 0x00, 0x17, 0x37,
0x20, 0x82, 0x14, 0x26, 0x42, 0x63, 0x84, 0x20, 0x96, 0x11, 0x68, 0x37,
0x60, 0x28, 0x69, 0x85, 0x45, 0x04, 0x62, 0x20, 0x49, 0x39, 0x74, 0x84,
0x60, 0x23, 0x38, 0x33, 0x42, 0x49, 0x38, 0x82, 0x30, 0x63, 0x21, 0x51,
0x69, 0x09, 0x05, 0x55, 0x78, 0x90, 0x68, 0x69, 0x22, 0x20, 0x17, 0x26,
0x54, 0x01, 0x10, 0x04, 0x68, 0x19, 0x88, 0x40, 0x91, 0x74, 0x81, 0x29,
0x07, 0x45, 0x33, 0x77, 0x12, 0x47, 0x08, 0x60, 0x09, 0x42, 0x84, 0x15,
0x63, 0x92, 0x64, 0x77, 0x07, 0x44, 0x11, 0x07, 0x79, 0x81, 0x24, 0x05,
0x21, 0x60, 0x81, 0x70, 0x66, 0x36, 0x69, 0x68, 0x45, 0x01, 0x11, 0x95,
0x67, 0x95, 0x55, 0x07, 0x96, 0x63, 0x84, 0x04, 0x74, 0x72, 0x61, 0x91,
0x60, 0x09, 0x90, 0x14, 0x34, 0x94, 0x06, 0x12, 0x01, 0x94, 0x40, 0x14,
0x12, 0x53, 0x64, 0x81, 0x75, 0x99, 0x36, 0x99, 0x11, 0x69, 0x95, 0x51,
0x71, 0x55, 0x24, 0x60, 0x52, 0x58, 0x88, 0x11, 0x88, 0x25, 0x37, 0x86,
0x66, 0x36, 0x69, 0x68, 0x45, 0x01, 0x11, 0x95
};
/* cipher text */
uint8_t ciphertext[2048] = {
0xE2, 0x19, 0x24, 0x56, 0x13, 0x59, 0xA6, 0x5D, 0xDF, 0xD0, 0x72, 0xAA,
0x23, 0xC7, 0x36, 0x3A, 0xBB, 0x3E, 0x8B, 0x64, 0xD5, 0xBF, 0xDE, 0x65,
0xA2, 0x75, 0xD9, 0x45, 0x6C, 0x3C, 0xD2, 0x6A, 0xC7, 0xD0, 0x9A, 0xD0,
0x87, 0xB8, 0xE4, 0x94, 0x11, 0x62, 0x5A, 0xC3, 0xC3, 0x01, 0xA3, 0x86,
0xBC, 0xBC, 0x9C, 0xC0, 0x81, 0x9F, 0xBF, 0x5C, 0x6F, 0x3F, 0x13, 0xF1,
0xAE, 0xCF, 0x26, 0xB3, 0xBC, 0x49, 0xD6, 0x3B, 0x7A, 0x2E, 0x99, 0x9E,
0x1B, 0x04, 0x50, 0x6C, 0x48, 0x6B, 0x4E, 0x72, 0xFC, 0xC8, 0xA7, 0x0C,
0x2C, 0xD9, 0xED, 0xE4, 0x82, 0xC4, 0x81, 0xA6, 0xB4, 0xCC, 0xAD, 0x10,
0xF3, 0x1C, 0x39, 0x05, 0x41, 0x2D, 0x57, 0x32, 0xE7, 0x16, 0xF8, 0x4D,
0xF0, 0xDE, 0x40, 0x5B, 0x5F, 0x80, 0xDC, 0xA7, 0xC3, 0x2D, 0x3D, 0x9E,
0x27, 0xD4, 0xE8, 0x10, 0x8E, 0xEB, 0xA5, 0x68, 0x6F, 0x3D, 0xC0, 0x44,
0xE7, 0x77, 0x73, 0xB9, 0x92, 0x8E, 0xA2, 0x26, 0x5C, 0x6F, 0x33, 0x4B,
0x0B, 0xEF, 0x37, 0x55, 0xBE, 0xEC, 0x98, 0x83, 0x1E, 0xDF, 0xB2, 0x9E,
0x5D, 0x1D, 0x78, 0x14, 0xD7, 0x85, 0x0E, 0xF8, 0x12, 0x30, 0x8E, 0x5D,
0x08, 0x77, 0x0B, 0x2E, 0x9B, 0xF9, 0xA6, 0x72, 0xD2, 0x41, 0xC1, 0x8E,
0x6B, 0x5E, 0x11, 0x85, 0x22, 0x6E, 0xE4, 0xA3, 0xEA, 0x4C, 0x91, 0xE1,
0x7D, 0xD0, 0xEB, 0x9F, 0xD9, 0xD7, 0x05, 0x77, 0xD9, 0xA1, 0xC2, 0xFD,
0x41, 0x63, 0x51, 0xB4, 0x7A, 0x1F, 0x21, 0xF0, 0xBF, 0x11, 0x4D, 0x9B,
0x97, 0xAB, 0xB4, 0x94, 0x36, 0x34, 0xC9, 0x2D, 0x8B, 0xE2, 0x61, 0xCF,
0xAF, 0x69, 0xD5, 0x5C, 0xE9, 0xED, 0xE3, 0xA0, 0x69, 0xD3, 0xE5, 0xAE,
0x67, 0x6C, 0xC7, 0x11, 0xB1, 0x21, 0x96, 0xD6, 0xDB, 0xA8, 0x1D, 0xC9,
0x83, 0x0B, 0xE2, 0xC6, 0x6E, 0x94, 0xE9, 0x50, 0x12, 0x9B, 0x01, 0x72,
0xAA, 0xFD, 0x8B, 0x7C, 0xEC, 0x0D, 0x01, 0xA4, 0x5D, 0x00, 0xE9, 0x79,
0x58, 0xF5, 0x67, 0xF9, 0x61, 0xC3, 0x11, 0xB4, 0x7E, 0x76, 0x0A, 0x4C,
0x60, 0xD6, 0xBD, 0xC8, 0x31, 0xD3, 0x0C, 0xD0, 0x5B, 0xDF, 0x7B, 0x05,
0x9A, 0xBB, 0xC6, 0x2E, 0x9F, 0xF8, 0x18, 0x80, 0x6D, 0x1B, 0x21, 0xE5,
0xAC, 0x75, 0xBC, 0x0D, 0x72, 0x51, 0x61, 0xD7, 0xEA, 0xA2, 0xAC, 0x0E,
0xC1, 0xE7, 0x49, 0x37, 0xE7, 0x7C, 0xDE, 0xBD, 0x56, 0x00, 0x44, 0x6D,
0xAB, 0x81, 0x2B, 0x26, 0x4A, 0xAA, 0x60, 0xE6, 0x43, 0x8D, 0x88, 0x1C,
0x48, 0x55, 0x53, 0x25, 0xE8, 0x3C, 0x46, 0xF0, 0xA6, 0x33, 0x2D, 0xA2,
0xDC, 0x99, 0x57, 0x38, 0x59, 0xCF, 0x53, 0xFA, 0x3E, 0x78, 0x46, 0xA0,
0xA9, 0x50, 0x12, 0x72, 0xAC, 0x15, 0xC6, 0xA7, 0x42, 0x0F, 0x59, 0x6E,
0xEA, 0xB0, 0x3D, 0xB8, 0x94, 0x32, 0xD1, 0xB6, 0xE8, 0x90, 0x06, 0x66,
0x0C, 0xDE, 0xA9, 0x35, 0xC7, 0xDD, 0x72, 0x42, 0x38, 0x33, 0x32, 0x2F,
0x2C, 0x3F, 0xBD, 0x01, 0xD6, 0x47, 0xFC, 0x89, 0x31, 0x38, 0x2E, 0xB9,
0x6B, 0xED, 0xDB, 0x85, 0x38, 0xB1, 0xA5, 0x50, 0xFA, 0xFB, 0xA7, 0x31,
0xEC, 0xB6, 0xBB, 0x82, 0x50, 0xB4, 0x88, 0x5C, 0xED, 0xE5, 0x4B, 0x5B,
0xBF, 0xB3, 0x18, 0xFB, 0xAD, 0x24, 0x41, 0x55, 0x80, 0xCD, 0xA3, 0xA1,
0xD6, 0xD5, 0xB6, 0x06, 0xE9, 0x85, 0x12, 0x33, 0x52, 0x56, 0xF1, 0xB7,
0xDC, 0x57, 0x9E, 0xB4, 0x00, 0x1E, 0xCB, 0x62, 0x13, 0x4C, 0x90, 0x9A,
0x9D, 0x64, 0x80, 0xD1, 0x5E, 0xB3, 0xCB, 0x8A, 0x73, 0x4E, 0x7B, 0xBE,
0x4D, 0xA7, 0xF7, 0xB7, 0x9C, 0x1C, 0x7F, 0x27, 0x1E, 0x7F, 0x58, 0xB2,
0x74, 0xAF, 0x94, 0x0E, 0x19, 0x23, 0xE1, 0x6B, 0xD8, 0x20, 0x4F, 0x2C,
0x13, 0xE8, 0x8C, 0x37, 0x46, 0x27, 0x55, 0x68, 0xDA, 0x3F, 0x7A, 0xC6,
0xEF, 0x87, 0x1D, 0x3B, 0x95, 0x43, 0x5E, 0x75, 0xE0, 0x02, 0x22, 0x0E,
0x11, 0x60, 0xAB, 0x1A, 0x91, 0x94, 0xC4, 0xFA, 0xD9, 0x92, 0x2B, 0xE5,
0x03, 0xE0, 0x7A, 0x17, 0x5C, 0x67, 0x22, 0xB3, 0xCB, 0x77, 0x9E, 0x22,
0x01, 0x5F, 0x5D, 0x64, 0xE4, 0x2F, 0xC4, 0x61, 0xCA, 0xC7, 0xFD, 0x20,
0x24, 0x30, 0xAB, 0x3F, 0x1A, 0x08, 0x85, 0x08, 0x39, 0xDE, 0x19, 0x1C,
0x1A, 0xEA, 0xB8, 0x7E, 0xE5, 0xBC, 0xD9, 0xB2, 0x59, 0xC8, 0x81, 0x02,
0x1D, 0x5C, 0xC0, 0xDD, 0x8D, 0x56, 0xB6, 0x2E, 0x85, 0x26, 0xA8, 0x34,
0x92, 0x36, 0x9A, 0x84, 0xBD, 0x27, 0xC1, 0x9D, 0x5E, 0x14, 0xC4, 0xB7,
0x02, 0xA8, 0xC9, 0xC2, 0xAD, 0xDC, 0x98, 0x42, 0x51, 0xDE, 0x94, 0x28,
0x39, 0xEF, 0xE9, 0x7F, 0x05, 0x3F, 0x1D, 0x67, 0x72, 0x04, 0xCF, 0x7D,
0x38, 0x49, 0xC4, 0x59, 0xA5, 0xF6, 0xB6, 0x02, 0x31, 0xD0, 0x05, 0x74,
0x4B, 0xD0, 0x89, 0xD1, 0x7F, 0xC6, 0xDB, 0x7E, 0x75, 0x62, 0xA3, 0xC2,
0x2E, 0xB0, 0xCC, 0x9A, 0xD3, 0xA4, 0x14, 0xB6, 0xF2, 0x91, 0x44, 0x3F,
0x84, 0xE0, 0x90, 0x4A, 0x6A, 0x34, 0x8C, 0x35, 0x3C, 0xB2, 0xA9, 0x35,
0x88, 0xB0, 0x88, 0xF8, 0x7E, 0x5C, 0xD2, 0x08, 0x5E, 0x08, 0x15, 0x03,
0xBC, 0xF5, 0x42, 0x6B, 0x28, 0xED, 0xDD, 0xAA, 0x4D, 0x78, 0x10, 0x31,
0x32, 0xA2, 0xC5, 0xCA, 0xEE, 0x9A, 0x62, 0x52, 0x3E, 0x48, 0x83, 0xA4,
0xCA, 0xD4, 0xC7, 0xA7, 0xA5, 0x3F, 0x44, 0x1C, 0x86, 0xAD, 0x52, 0x7D,
0x80, 0x1D, 0x9E, 0x32, 0x3F, 0x2A, 0x2E, 0xD8, 0x89, 0xC1, 0xA4, 0xD6,
0xC1, 0x90, 0x2E, 0x1A, 0x20, 0x4B, 0x87, 0x32, 0x35, 0x25, 0xD8, 0xB8,
0x57, 0x15, 0x85, 0x1E, 0x3C, 0x8A, 0xDC, 0x1A, 0x49, 0x3D, 0x70, 0x35,
0x99, 0xAA, 0xDE, 0x2C, 0xD4, 0xAF, 0x79, 0x72, 0xAB, 0x97, 0x84, 0x20,
0xB6, 0x4F, 0x34, 0x3F, 0xEA, 0xAE, 0x5F, 0x8F, 0x3A, 0x42, 0xDB, 0x68,
0xE5, 0x84, 0x63, 0x2E, 0x7A, 0x0E, 0xBD, 0x28, 0x6A, 0x24, 0xB6, 0xAB,
0xE4, 0xAC, 0x20, 0x7C, 0x81, 0xD0, 0x69, 0x89, 0xF8, 0xDE, 0xA9, 0x02,
0xFD, 0x1F, 0x08, 0xDA, 0x26, 0xC2, 0x24, 0xCA, 0xEB, 0x44, 0x16, 0x8D,
0x55, 0x5F, 0xB9, 0xA9, 0x5A, 0x18, 0x50, 0xB1, 0x54, 0xF1, 0xBF, 0x06,
0xC2, 0xB0, 0x95, 0xC2, 0xAE, 0xE5, 0xBF, 0xB3, 0xFD, 0xC9, 0xBF, 0x75,
0x42, 0x7D, 0xA0, 0xA8, 0x95, 0xF9, 0x62, 0x3B, 0x9C, 0x0D, 0x81, 0xF3,
0x9C, 0xFC, 0x19, 0x5B, 0xF7, 0xD1, 0x9C, 0xF0, 0xAA, 0xFE, 0xEF, 0x35,
0x1E, 0x81, 0x9E, 0x02, 0x46, 0x52, 0x9B, 0x99, 0x0D, 0x12, 0x8B, 0x71,
0x6C, 0x32, 0xB5, 0x23, 0x17, 0x03, 0xC5, 0xB0, 0xA1, 0xC3, 0x4B, 0x10,
0x01, 0x4D, 0x4C, 0x4A, 0x46, 0x8F, 0xD9, 0x79, 0xBB, 0x10, 0x44, 0xB0,
0x3C, 0x7D, 0x46, 0xFD, 0x38, 0xDF, 0xAF, 0x6E, 0x58, 0x7D, 0xE1, 0xEB,
0xBB, 0x8C, 0xDC, 0x79, 0xDA, 0x41, 0xD1, 0x8B, 0x0B, 0x11, 0x4F, 0xE5,
0x1C, 0xC1, 0x59, 0xA7, 0x1E, 0x5A, 0xC1, 0xEE, 0x27, 0x33, 0xC8, 0x55,
0xA9, 0x32, 0xEA, 0xF7, 0x45, 0xB0, 0x08, 0xE9, 0x32, 0xDF, 0x70, 0x24,
0x82, 0xD3, 0x2A, 0x3E, 0x4F, 0x42, 0xB9, 0x25, 0x10, 0xD1, 0x73, 0xFA,
0xFD, 0xC1, 0x84, 0xF2, 0xF7, 0x0E, 0xBC, 0x9D, 0x90, 0x39, 0xD7, 0xFD,
0x45, 0x77, 0xBA, 0x29, 0xF9, 0x87, 0x45, 0xC1, 0x32, 0x44, 0xB0, 0x27,
0x6B, 0xFC, 0x8A, 0xFE, 0x00, 0x6F, 0x61, 0x98, 0xD0, 0x60, 0xC8, 0x10,
0xE5, 0xBC, 0x88, 0x13, 0x45, 0x44, 0xA5, 0xEB, 0x6E, 0xCB, 0x11, 0xAF,
0x30, 0xDC, 0x8B, 0xF8, 0x30, 0x46, 0xDA, 0x76, 0xF1, 0xE5, 0x14, 0x51,
0x8A, 0x02, 0x5A, 0x5A, 0xAA, 0x7B, 0x2D, 0x57, 0x0A, 0x5C, 0x73, 0xD1,
0x88, 0xCE, 0xBE, 0x3D, 0x06, 0x3F, 0x48, 0x1D, 0x44, 0x24, 0x6F, 0x4F,
0x7F, 0x6A, 0xF2, 0x16, 0x34, 0x35, 0x38, 0x73, 0x8A, 0xE5, 0x25, 0xF4,
0x34, 0x9E, 0x5B, 0x40, 0x90, 0x04, 0x57, 0x1B, 0x57, 0x75, 0x8F, 0xEA,
0x1C, 0xF8, 0x7A, 0x68, 0x01, 0x1C, 0x8D, 0xBA, 0xF4, 0xE3, 0xD3, 0x8F,
0x7F, 0xE4, 0x50, 0x35, 0x6B, 0x6B, 0xF6, 0xFC, 0x5F, 0x9B, 0x98, 0x78,
0x16, 0x68, 0x72, 0x74, 0x71, 0x78, 0x25, 0x68, 0xE5, 0x1E, 0x66, 0xE2,
0x4E, 0xC8, 0xDB, 0x92, 0x8E, 0x88, 0x64, 0x74, 0xDE, 0xDB, 0x85, 0x56,
0x9F, 0xF9, 0xC4, 0x29, 0x54, 0xA8, 0xFB, 0xBA, 0xEA, 0xAB, 0xC7, 0x49,
0x5C, 0x6C, 0xD7, 0x61, 0x8C, 0xE2, 0x2B, 0xF5, 0xA0, 0xA8, 0xD2, 0x41,
0xC0, 0x54, 0xAB, 0xA7, 0x56, 0x5C, 0xE7, 0xA5, 0xEA, 0xBC, 0x47, 0xD1,
0x0D, 0xD9, 0xC0, 0xA9, 0xC4, 0xA7, 0x3E, 0xD1, 0x2B, 0x1E, 0x34, 0x31,
0x36, 0x9D, 0xB9, 0x51, 0xD3, 0xAD, 0x29, 0xE6, 0x9B, 0xD8, 0x4B, 0x93,
0x33, 0x2F, 0x30, 0xEF, 0x18, 0x90, 0x69, 0x11, 0x09, 0xEA, 0xBA, 0xE0,
0x10, 0x93, 0x63, 0x71, 0xA8, 0x83, 0x59, 0xDB, 0xFC, 0x12, 0x22, 0x84,
0xC7, 0x01, 0x20, 0x99, 0xEC, 0x59, 0xA9, 0xE6, 0x9B, 0x5B, 0x8B, 0xB8,
0x68, 0x52, 0x61, 0x8B, 0x4E, 0xF3, 0x50, 0x69, 0xF1, 0x49, 0x9B, 0xAF,
0x53, 0xAD, 0xA0, 0x9D, 0x23, 0xE0, 0xE0, 0xC4, 0x31, 0xE4, 0x8E, 0x1C,
0x51, 0x14, 0xFC, 0x95, 0x9C, 0xA6, 0x34, 0x85, 0xB0, 0x36, 0xFC, 0x7A,
0x53, 0x03, 0x31, 0x0E, 0xCB, 0x34, 0x3E, 0xDF, 0xD1, 0x71, 0xBC, 0xDB,
0xA1, 0xAF, 0x59, 0x4A, 0x03, 0x19, 0xA7, 0x8E, 0xB5, 0x82, 0x15, 0x24,
0x69, 0x68, 0xBD, 0x9C, 0x2E, 0xFA, 0x06, 0xB5, 0x70, 0xC5, 0x70, 0xC4,
0x14, 0x99, 0x01, 0x49, 0xBD, 0x6E, 0xAE, 0x10, 0xA1, 0xE4, 0xEF, 0xDD,
0xE5, 0x51, 0x22, 0x9D, 0xF7, 0x93, 0xAB, 0x41, 0xBD, 0x86, 0x7A, 0xCC,
0x51, 0x94, 0xEC, 0x22, 0xBE, 0x0D, 0x67, 0xFD, 0xA3, 0xFD, 0xCF, 0xF8,
0x74, 0x0A, 0x5E, 0x1C, 0x71, 0xAD, 0xB6, 0xD0, 0xD7, 0xF8, 0x71, 0x34,
0xAB, 0x62, 0xE7, 0xA8, 0x6B, 0x8F, 0x1E, 0x43, 0x46, 0xA5, 0xE4, 0xB4,
0x52, 0x81, 0x66, 0xB3, 0xE5, 0x10, 0x23, 0x21, 0x2B, 0x31, 0x0F, 0xB8,
0xB6, 0xC5, 0xA5, 0xC9, 0x90, 0x07, 0x83, 0xD0, 0xC3, 0x10, 0x7A, 0x04,
0xBD, 0x8A, 0x3C, 0x7B, 0xF9, 0x0E, 0x51, 0x81, 0x96, 0xC8, 0xAE, 0xF9,
0x27, 0xDE, 0x62, 0x7A, 0x41, 0x60, 0x35, 0x8F, 0x77, 0xBC, 0x95, 0x11,
0x2C, 0xC4, 0x6C, 0x47, 0x7A, 0xEB, 0x29, 0xE5, 0x8E, 0xB5, 0xD6, 0xA5,
0x54, 0x1B, 0xD0, 0xE0, 0x0F, 0x7D, 0x5C, 0x51, 0xD8, 0x6C, 0x92, 0x2F,
0x13, 0x4E, 0x90, 0x77, 0xF8, 0x8D, 0x69, 0x78, 0x96, 0x96, 0x49, 0x9F,
0x3C, 0x2E, 0x5C, 0xA6, 0x73, 0x27, 0x7D, 0xAD, 0x8D, 0xE3, 0x9B, 0x4A,
0x2F, 0x50, 0x0A, 0x42, 0x7E, 0xF2, 0x3B, 0x50, 0x5C, 0x81, 0xC9, 0x49,
0x01, 0x96, 0x83, 0x0A, 0xEC, 0x7F, 0xED, 0x1C, 0xA5, 0x7D, 0xF1, 0xE6,
0xC4, 0xB3, 0x8F, 0xF9, 0x0F, 0xDB, 0x7B, 0xC1, 0x35, 0xF7, 0x63, 0x4A,
0x39, 0xD4, 0x0E, 0x9E, 0x05, 0xD9, 0x42, 0xAA, 0xAB, 0x52, 0xCA, 0x4E,
0x98, 0x3B, 0x43, 0x1A, 0x91, 0x25, 0xA9, 0x34, 0xD5, 0x66, 0xB2, 0xF4,
0xFF, 0xDE, 0x64, 0x91, 0x90, 0xB9, 0x17, 0x70, 0xA0, 0xD6, 0xEA, 0xB6,
0x36, 0xF4, 0x44, 0xCE, 0x86, 0x7B, 0x18, 0x74, 0x9C, 0x18, 0xAD, 0xB6,
0xE0, 0x74, 0xC1, 0x0E, 0x29, 0x5D, 0x6A, 0x36, 0xD1, 0x3E, 0xB8, 0x2A,
0xE4, 0x23, 0x1D, 0xB2, 0xAE, 0xF5, 0x5B, 0x8E, 0x2C, 0xD9, 0xD1, 0xE1,
0x4F, 0x58, 0xA6, 0xE3, 0x88, 0x2E, 0xF9, 0xCF, 0x32, 0x3E, 0x8E, 0x37,
0x95, 0xFF, 0xAD, 0x68, 0x11, 0x5E, 0x7F, 0x3D, 0x38, 0x06, 0x7C, 0x33,
0x32, 0x78, 0x09, 0xEC, 0xCA, 0x3E, 0x08, 0xF1, 0xD0, 0x95, 0x19, 0xC9,
0x7E, 0x62, 0xB2, 0x02, 0xA3, 0x5D, 0xF8, 0x3F, 0xA2, 0xB0, 0x8B, 0x38,
0xB1, 0x8C, 0xEA, 0xB3, 0xE4, 0xBF, 0xD3, 0x6C, 0x6D, 0x3D, 0xD1, 0xC6,
0xDA, 0x6B, 0x7A, 0xBA, 0x05, 0xEA, 0x9E, 0xA5, 0xE9, 0x00, 0xCC, 0x80,
0x57, 0xAB, 0xD9, 0x0A, 0xD1, 0x00, 0x82, 0x2A, 0x51, 0x4B, 0xA2, 0x96,
0xEB, 0x96, 0x14, 0xA8, 0x46, 0xDF, 0x1D, 0x48, 0xAE, 0xFA, 0x12, 0xA8,
0x89, 0x8E, 0xEF, 0xBC, 0x3C, 0xA1, 0x6E, 0xDD, 0x90, 0x66, 0x2E, 0x56,
0x6B, 0xF7, 0x1D, 0xF0, 0x46, 0x11, 0x4A, 0xA6, 0x07, 0x73, 0xC4, 0xE3,
0x97, 0xFE, 0x7E, 0x22, 0x6F, 0x22, 0xB4, 0x6F, 0xB0, 0x32, 0x0A, 0x5E,
0x85, 0x7E, 0x54, 0xB4, 0x24, 0xBD, 0x36, 0xA7, 0x94, 0xE7, 0x37, 0xFD,
0x1A, 0xAF, 0xF4, 0x44, 0xB4, 0x35, 0x4F, 0xE0, 0x41, 0x0E, 0x7D, 0x73,
0x29, 0x28, 0xDA, 0xAF, 0x69, 0xB2, 0xC5, 0xA7, 0x2A, 0x0A, 0xB5, 0x9C,
0xC2, 0xAC, 0x5F, 0x59, 0x5C, 0xEE, 0x44, 0x49, 0x6F, 0x4F, 0x64, 0x43,
0x6F, 0x43, 0x44, 0xAA, 0xA0, 0x4E, 0x94, 0x7C, 0x26, 0x5A, 0xF1, 0xD9,
0xE6, 0x09, 0x80, 0x7A, 0x7D, 0x2E, 0xA2, 0xB9, 0x1A, 0x7A, 0x8F, 0x2A,
0x97, 0x77, 0x23, 0xB4, 0x10, 0xAD, 0x20, 0x7B, 0xA3, 0x0F, 0xFD, 0x44,
0x38, 0xAD, 0x94, 0x39, 0x88, 0x1C, 0xC4, 0xC8, 0xDF, 0xF1, 0x04, 0xA6,
0x51, 0x5D, 0x54, 0x53, 0x60, 0xE4, 0x8A, 0x89, 0x4A, 0x9C, 0xE1, 0x68,
0x4D, 0xFE, 0x69, 0x94, 0x0B, 0x8E, 0xED, 0x6C, 0xFE, 0x11, 0xA7, 0x77,
0xBF, 0x08, 0x41, 0x67, 0x22, 0x59, 0x51, 0x48, 0xEE, 0x59, 0x02, 0x0E,
0x60, 0x6D, 0xAE, 0x8C, 0xC6, 0x39, 0xB7, 0x55, 0xC5, 0x3B, 0x87, 0xA9,
0xBD, 0xD8, 0xEA, 0x48, 0x21, 0xE4, 0x57, 0x51, 0x56, 0x03, 0xF4, 0xBE,
0xBD, 0xBD, 0xC5, 0x26, 0x9B, 0x27, 0xE3, 0xAE, 0xD5, 0x1E, 0x30, 0xE9,
0x7C, 0x9D, 0xDB, 0xE1, 0x09, 0x9D, 0x82, 0x49, 0x15, 0x38, 0x69, 0xFC,
0x1D, 0x52, 0x1A, 0x75, 0xE6, 0xDD, 0x1D, 0xBE, 0x06, 0xC4, 0x9F, 0x14,
0x4C, 0x12, 0xDE, 0xDF, 0x4A, 0xE1, 0x3B, 0xE7, 0xD1, 0xE3, 0x71, 0xD1,
0xFA, 0xD8, 0x0E, 0x63, 0x27, 0xA9, 0xC7, 0x9D, 0xC0, 0x01, 0xC2, 0xDD,
0xFC, 0xA6, 0x1F, 0x59, 0x87, 0xC5, 0x56, 0x99, 0x80, 0xEB, 0xF0, 0xB8,
0xB3, 0x00, 0x9A, 0x61, 0xDB, 0x50, 0x79, 0x48, 0x37, 0x35, 0xDA, 0xD8,
0xF2, 0x37, 0xA7, 0x43, 0xA7, 0xEB, 0x88, 0x2C, 0x68, 0xB4, 0xBB, 0x14,
0x45, 0x31, 0x6B, 0x87, 0x65, 0xE7, 0x82, 0xB4, 0x74, 0xD2, 0xFF, 0x7F,
0x60, 0x15, 0x94, 0x75, 0xEE, 0x30, 0x3C, 0x4E, 0xFC, 0x41, 0xD1, 0x5B,
0xDD, 0x84, 0x6E, 0x13, 0x6C, 0xF8, 0x12, 0xE6, 0xB7, 0xA4, 0xB9, 0xC8,
0x13, 0x89, 0x0C, 0x34, 0xA6, 0xAF, 0x09, 0xEB, 0xF2, 0xB3, 0x79, 0x77,
0x80, 0xD8, 0x77, 0x64, 0xAD, 0x32, 0x3D, 0xD2, 0x06, 0xDF, 0x72, 0x11,
0x4A, 0xA7, 0x70, 0xCE, 0xF9, 0xE6, 0x81, 0x35, 0xA4, 0xA7, 0x52, 0xB5,
0x13, 0x68, 0x5C, 0x69, 0x45, 0xE2, 0x77, 0x2D, 0xBE, 0x2C, 0xE9, 0x38,
0x25, 0x28, 0x7B, 0x63, 0x2C, 0x19, 0x8F, 0x59
};
/* aad */
uint8_t aad[] = {
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B
};
/* iv */
uint8_t iv[] = {
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B,
0x0C, 0x0D, 0x0E, 0x0F
};
/* cipher key */
uint8_t cipher_key[] = {
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B,
0x0C, 0x0D, 0x0E, 0x0F, 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D, 0x1E, 0x1F
};
/* auth key */
uint8_t auth_key[] = {
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B,
0x0C, 0x0D, 0x0E, 0x0F, 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D, 0x1E, 0x1F, 0x20, 0x21, 0x22, 0x23,
0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B, 0x2C, 0x2D, 0x2E, 0x2F,
0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x3B,
0x3C, 0x3D, 0x3E, 0x3F, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, 0x50, 0x51, 0x52, 0x53,
0x54, 0x55, 0x56, 0x57, 0x58, 0x59, 0x5A, 0x5B, 0x5C, 0x5D, 0x5E, 0x5F,
0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6A, 0x6B,
0x6C, 0x6D, 0x6E, 0x6F, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77,
0x78, 0x79, 0x7A, 0x7B, 0x7C, 0x7D, 0x7E, 0x7F
};
/* AEAD key */
uint8_t aead_key[] = {
0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B,
0x0C, 0x0D, 0x0E, 0x0F, 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D, 0x1E, 0x1F
};
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/* Digests */
uint8_t digest[2048] = { 0x00 };
struct cperf_test_vector*
cperf_test_vector_get_dummy(struct cperf_options *options)
{
struct cperf_test_vector *t_vec;
t_vec = (struct cperf_test_vector *)rte_malloc(NULL,
sizeof(struct cperf_test_vector), 0);
if (t_vec == NULL)
return t_vec;
t_vec->plaintext.data = plaintext;
t_vec->plaintext.length = options->max_buffer_size;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
if (options->op_type == CPERF_CIPHER_ONLY ||
options->op_type == CPERF_CIPHER_THEN_AUTH ||
options->op_type == CPERF_AUTH_THEN_CIPHER) {
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
if (options->cipher_algo == RTE_CRYPTO_CIPHER_NULL) {
t_vec->cipher_key.length = 0;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
t_vec->ciphertext.data = plaintext;
t_vec->cipher_key.data = NULL;
} else {
t_vec->cipher_key.length = options->cipher_key_sz;
t_vec->ciphertext.data = ciphertext;
t_vec->cipher_key.data = cipher_key;
}
/* Init IV data ptr */
t_vec->cipher_iv.data = NULL;
if (options->cipher_iv_sz != 0) {
/* Set IV parameters */
t_vec->cipher_iv.data = rte_malloc(NULL,
options->cipher_iv_sz, 16);
if (t_vec->cipher_iv.data == NULL) {
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
rte_free(t_vec);
return NULL;
}
memcpy(t_vec->cipher_iv.data, iv, options->cipher_iv_sz);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
t_vec->ciphertext.length = options->max_buffer_size;
t_vec->cipher_iv.length = options->cipher_iv_sz;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
t_vec->data.cipher_offset = 0;
t_vec->data.cipher_length = options->max_buffer_size;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
if (options->op_type == CPERF_AUTH_ONLY ||
options->op_type == CPERF_CIPHER_THEN_AUTH ||
options->op_type == CPERF_AUTH_THEN_CIPHER) {
if (options->auth_algo == RTE_CRYPTO_AUTH_NULL) {
t_vec->auth_key.length = 0;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
t_vec->auth_key.data = NULL;
t_vec->digest.data = NULL;
t_vec->digest.length = 0;
} else {
t_vec->auth_key.length = options->auth_key_sz;
t_vec->auth_key.data = auth_key;
t_vec->digest.data = rte_malloc(NULL,
options->digest_sz,
16);
if (t_vec->digest.data == NULL) {
rte_free(t_vec->cipher_iv.data);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
rte_free(t_vec);
return NULL;
}
t_vec->digest.phys_addr =
rte_malloc_virt2iova(t_vec->digest.data);
t_vec->digest.length = options->digest_sz;
memcpy(t_vec->digest.data, digest,
options->digest_sz);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
t_vec->data.auth_offset = 0;
t_vec->data.auth_length = options->max_buffer_size;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/* Set IV parameters */
t_vec->auth_iv.data = rte_malloc(NULL, options->auth_iv_sz,
16);
if (options->auth_iv_sz && t_vec->auth_iv.data == NULL) {
if (options->op_type != CPERF_AUTH_ONLY)
rte_free(t_vec->cipher_iv.data);
rte_free(t_vec);
return NULL;
}
memcpy(t_vec->auth_iv.data, iv, options->auth_iv_sz);
t_vec->auth_iv.length = options->auth_iv_sz;
}
if (options->op_type == CPERF_AEAD) {
t_vec->aead_key.length = options->aead_key_sz;
t_vec->aead_key.data = aead_key;
if (options->aead_aad_sz) {
t_vec->aad.data = rte_malloc(NULL,
options->aead_aad_sz, 16);
if (t_vec->aad.data == NULL) {
rte_free(t_vec);
return NULL;
}
memcpy(t_vec->aad.data, aad, options->aead_aad_sz);
t_vec->aad.phys_addr = rte_malloc_virt2iova(t_vec->aad.data);
t_vec->aad.length = options->aead_aad_sz;
} else {
t_vec->aad.data = NULL;
t_vec->aad.length = 0;
}
t_vec->digest.data = rte_malloc(NULL, options->digest_sz,
16);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
if (t_vec->digest.data == NULL) {
rte_free(t_vec->aad.data);
rte_free(t_vec);
return NULL;
}
t_vec->digest.phys_addr =
rte_malloc_virt2iova(t_vec->digest.data);
t_vec->digest.length = options->digest_sz;
memcpy(t_vec->digest.data, digest, options->digest_sz);
t_vec->data.aead_offset = 0;
t_vec->data.aead_length = options->max_buffer_size;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/* Set IV parameters */
t_vec->aead_iv.data = rte_malloc(NULL, options->aead_iv_sz,
16);
if (options->aead_iv_sz && t_vec->aead_iv.data == NULL) {
rte_free(t_vec->aad.data);
rte_free(t_vec->digest.data);
rte_free(t_vec);
return NULL;
}
memcpy(t_vec->aead_iv.data, iv, options->aead_iv_sz);
t_vec->aead_iv.length = options->aead_iv_sz;
}
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
return t_vec;
}