d/numam-dpdk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
383fb5a9c7
numam-dpdk/lib/Makefile

138 lines
6.3 KiB
Makefile
Raw Normal View History

lib: use SPDX tag for Intel copyright files Replace the BSD license header with the SPDX tag for files with only an Intel copyright on them. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-19 15:49:03 +00:00
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2010-2017 Intel Corporation
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
include $(RTE_SDK)/mk/rte.vars.mk
kvargs: build before EAL This library will be used by the EAL to parse parameters. Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
2018-07-11 21:44:54 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_KVARGS) += librte_kvargs
eal: add telemetry as dependency This patch moves telemetry further down the build, and adds it as a dependency for EAL. Telemetry V2 is now configured to build by default, and the legacy support is built when the telemetry config flag is set. Telemetry now has EAL flags, shown below: "--telemetry" = Enables telemetry (this is default if no flags given) "--no-telemetry" = Disables telemetry When telemetry is enabled, it will attempt to open the new socket version, and also the legacy support socket (this will depend on Jansson external dependency and telemetry config flag, as before). Signed-off-by: Ciara Power <ciara.power@intel.com> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Reviewed-by: Keith Wiles <keith.wiles@intel.com>
2020-04-30 16:01:34 +00:00
DIRS-y += librte_telemetry
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_EAL) += librte_eal
eal: add telemetry as dependency This patch moves telemetry further down the build, and adds it as a dependency for EAL. Telemetry V2 is now configured to build by default, and the legacy support is built when the telemetry config flag is set. Telemetry now has EAL flags, shown below: "--telemetry" = Enables telemetry (this is default if no flags given) "--no-telemetry" = Disables telemetry When telemetry is enabled, it will attempt to open the new socket version, and also the legacy support socket (this will depend on Jansson external dependency and telemetry config flag, as before). Signed-off-by: Ciara Power <ciara.power@intel.com> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Reviewed-by: Keith Wiles <keith.wiles@intel.com>
2020-04-30 16:01:34 +00:00
DEPDIRS-librte_eal := librte_kvargs librte_telemetry
pci: introduce library and driver The PCI lib defines the types and methods allowing to use PCI elements. The PCI bus implements a bus driver for PCI devices by constructing rte_bus elements using the PCI lib. Move the relevant code out of the EAL to its expected place. Libraries, drivers, unit tests and applications are updated to use the new rte_bus_pci.h header when necessary. Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
2017-10-26 10:06:08 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_PCI) += librte_pci
DEPDIRS-librte_pci := librte_eal
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_RING) += librte_ring
mk: optimize directory dependencies Before this patch, the management of dependencies between directories had several issues: - the generation of .depdirs, done at configuration is slow: it can take more than one minute on some slow targets (usually ~10s on a standard PC without -j). - for instance, it is possible to express a dependency like: - app/foo depends on lib/librte_foo - and lib/librte_foo depends on app/bar But this won't work because the directories are traversed with a depth-first algorithm, so we have to choose between doing 'app' before or after 'lib'. - the script depdirs-rule.sh is too complex. - we cannot use "make -d" for debug, because the output of make is used for the generation of .depdirs. This patch moves the DEPDIRS-* variables in the upper Makefile, making the dependencies much easier to calculate. A DEPDIRS variable is still used to process library dependencies in LDLIBS. After this commit, "make config" is almost immediate. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Robin Jarry <robin.jarry@6wind.com> Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2017-03-24 13:21:31 +00:00
DEPDIRS-librte_ring := librte_eal
stack: introduce stack library The rte_stack library provides an API for configuration and use of a bounded stack of pointers. Push and pop operations are MT-safe, allowing concurrent access, and the interface supports pushing and popping multiple pointers at a time. The library's interface is modeled after another DPDK data structure, rte_ring, and its lock-based implementation is derived from the stack mempool handler. An upcoming commit will migrate the stack mempool handler to rte_stack. Signed-off-by: Gage Eads <gage.eads@intel.com> Reviewed-by: Olivier Matz <olivier.matz@6wind.com> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
2019-04-03 23:20:13 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_STACK) += librte_stack
DEPDIRS-librte_stack := librte_eal
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += librte_mempool
mk: optimize directory dependencies Before this patch, the management of dependencies between directories had several issues: - the generation of .depdirs, done at configuration is slow: it can take more than one minute on some slow targets (usually ~10s on a standard PC without -j). - for instance, it is possible to express a dependency like: - app/foo depends on lib/librte_foo - and lib/librte_foo depends on app/bar But this won't work because the directories are traversed with a depth-first algorithm, so we have to choose between doing 'app' before or after 'lib'. - the script depdirs-rule.sh is too complex. - we cannot use "make -d" for debug, because the output of make is used for the generation of .depdirs. This patch moves the DEPDIRS-* variables in the upper Makefile, making the dependencies much easier to calculate. A DEPDIRS variable is still used to process library dependencies in LDLIBS. After this commit, "make config" is almost immediate. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Robin Jarry <robin.jarry@6wind.com> Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2017-03-24 13:21:31 +00:00
DEPDIRS-librte_mempool := librte_eal librte_ring
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_MBUF) += librte_mbuf
mk: optimize directory dependencies Before this patch, the management of dependencies between directories had several issues: - the generation of .depdirs, done at configuration is slow: it can take more than one minute on some slow targets (usually ~10s on a standard PC without -j). - for instance, it is possible to express a dependency like: - app/foo depends on lib/librte_foo - and lib/librte_foo depends on app/bar But this won't work because the directories are traversed with a depth-first algorithm, so we have to choose between doing 'app' before or after 'lib'. - the script depdirs-rule.sh is too complex. - we cannot use "make -d" for debug, because the output of make is used for the generation of .depdirs. This patch moves the DEPDIRS-* variables in the upper Makefile, making the dependencies much easier to calculate. A DEPDIRS variable is still used to process library dependencies in LDLIBS. After this commit, "make config" is almost immediate. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Robin Jarry <robin.jarry@6wind.com> Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2017-03-24 13:21:31 +00:00
DEPDIRS-librte_mbuf := librte_eal librte_mempool
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_TIMER) += librte_timer
mk: optimize directory dependencies Before this patch, the management of dependencies between directories had several issues: - the generation of .depdirs, done at configuration is slow: it can take more than one minute on some slow targets (usually ~10s on a standard PC without -j). - for instance, it is possible to express a dependency like: - app/foo depends on lib/librte_foo - and lib/librte_foo depends on app/bar But this won't work because the directories are traversed with a depth-first algorithm, so we have to choose between doing 'app' before or after 'lib'. - the script depdirs-rule.sh is too complex. - we cannot use "make -d" for debug, because the output of make is used for the generation of .depdirs. This patch moves the DEPDIRS-* variables in the upper Makefile, making the dependencies much easier to calculate. A DEPDIRS variable is still used to process library dependencies in LDLIBS. After this commit, "make config" is almost immediate. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Robin Jarry <robin.jarry@6wind.com> Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2017-03-24 13:21:31 +00:00
DEPDIRS-librte_timer := librte_eal
cfgfile: library to interpret config files This library provides a tool to interpret config files that have standard structure. It is used by the Packet Framework examples/ip_pipeline sample application. It originates from examples/qos_sched sample application and now it makes this code available as a library for other sample applications to use. The code duplication with qos_sched sample app to be addressed later. Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com> Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com> Acked by: Ivan Boule <ivan.boule@6wind.com>
2014-06-04 18:08:36 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_CFGFILE) += librte_cfgfile
cfgfile: use log for error messages In general, DPDK libraries to not print error messages to stdout because that is often redirected to /dev/null for daemons. This patch changes cfgfile library to use RTE_LOG with its own type. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
2019-07-18 17:18:11 +00:00
DEPDIRS-librte_cfgfile := librte_eal
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_CMDLINE) += librte_cmdline
cmdline: use new ethernet address parser Now that there is a version of ether_aton in rte_ether, it can be used by the cmdline ethernet address parser. Note: ether_aton_r can not be used in cmdline because the old code would accept either bytes XX:XX:XX:XX:XX:XX or words XXXX:XXXX:XXXX and we need to keep compatibility. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Olivier Matz <olivier.matz@6wind.com>
2019-07-05 17:16:20 +00:00
DEPDIRS-librte_cmdline := librte_eal librte_net
ethdev: rename folder to library name Library folder name and output library name are same except a few flaws including librte_ether. This library is network device abstraction layer, the name "ethdev" fits better than "ether", and library & header files already named as ethdev. Also there is a rte_ether.h in the net library which can cause confusion. Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2018-04-26 21:25:59 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_ETHER) += librte_ethdev
DEPDIRS-librte_ethdev := librte_net librte_eal librte_mempool librte_ring
DEPDIRS-librte_ethdev += librte_mbuf
DEPDIRS-librte_ethdev += librte_kvargs
meter: unify packet color definition Added new rte_color definition in librte_meter to consolidate color definition which is currently replicated in various places such as rte_meter.h, rte_tm.h and rte_mtr.h Created aliases for rte_tm_color, rte_mtr_color and rte_meter_color to use new rte_color values. The definitions of rte_tm_color, rte_mtr_color and rte_meter_color will be deprecated in future. Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com> Signed-off-by: Reshma Pattan <reshma.pattan@intel.com> Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
2018-12-20 12:16:08 +00:00
DEPDIRS-librte_ethdev += librte_meter
bbdev: introduce wireless base band device lib - wireless baseband device (bbdev) library files - bbdev is tagged as EXPERIMENTAL - Makefiles and configuration macros definition - bbdev library is enabled by default - release notes of the initial version Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com> Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
2018-01-11 19:23:18 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_BBDEV) += librte_bbdev
DEPDIRS-librte_bbdev := librte_eal librte_mempool librte_mbuf
cryptodev: introduce API and framework for crypto devices This patch contains the initial proposed APIs and device framework for integrating crypto packet processing into DPDK. features include: - Crypto device configuration / management APIs - Definitions of supported cipher algorithms and operations. - Definitions of supported hash/authentication algorithms and operations. - Crypto session management APIs - Crypto operation data structures and APIs allocation of crypto operation structure used to specify the crypto operations to be performed on a particular mbuf. - Extension of mbuf to contain crypto operation data pointer and extra flags. - Burst enqueue / dequeue APIs for processing of crypto operations. Signed-off-by: Des O Dea <des.j.o.dea@intel.com> Signed-off-by: John Griffin <john.griffin@intel.com> Signed-off-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Declan Doherty <declan.doherty@intel.com> Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2015-11-25 13:25:12 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += librte_cryptodev
mk: optimize directory dependencies Before this patch, the management of dependencies between directories had several issues: - the generation of .depdirs, done at configuration is slow: it can take more than one minute on some slow targets (usually ~10s on a standard PC without -j). - for instance, it is possible to express a dependency like: - app/foo depends on lib/librte_foo - and lib/librte_foo depends on app/bar But this won't work because the directories are traversed with a depth-first algorithm, so we have to choose between doing 'app' before or after 'lib'. - the script depdirs-rule.sh is too complex. - we cannot use "make -d" for debug, because the output of make is used for the generation of .depdirs. This patch moves the DEPDIRS-* variables in the upper Makefile, making the dependencies much easier to calculate. A DEPDIRS variable is still used to process library dependencies in LDLIBS. After this commit, "make config" is almost immediate. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Robin Jarry <robin.jarry@6wind.com> Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2017-03-24 13:21:31 +00:00
DEPDIRS-librte_cryptodev := librte_eal librte_mempool librte_ring librte_mbuf
DEPDIRS-librte_cryptodev += librte_kvargs
security: introduce security API and framework rte_security library provides APIs for security session create/free for protocol offload or offloaded crypto operation to ethernet device. Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Radu Nicolau <radu.nicolau@intel.com> Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
2017-10-25 15:07:23 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_SECURITY) += librte_security
DEPDIRS-librte_security := librte_eal librte_mempool librte_ring librte_mbuf
ethdev: rename folder to library name Library folder name and output library name are same except a few flaws including librte_ether. This library is network device abstraction layer, the name "ethdev" fits better than "ether", and library & header files already named as ethdev. Also there is a rte_ether.h in the net library which can cause confusion. Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2018-04-26 21:25:59 +00:00
DEPDIRS-librte_security += librte_ethdev
security: introduce security API and framework rte_security library provides APIs for security session create/free for protocol offload or offloaded crypto operation to ethernet device. Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Radu Nicolau <radu.nicolau@intel.com> Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
2017-10-25 15:07:23 +00:00
DEPDIRS-librte_security += librte_cryptodev
compressdev: add basic device management Add basic functions to manage compress devices, including driver and device allocation, and the basic interface with compressdev PMDs. Signed-off-by: Fiona Trahe <fiona.trahe@intel.com> Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com> Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
2018-04-27 13:23:54 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_COMPRESSDEV) += librte_compressdev
DEPDIRS-librte_compressdev := librte_eal librte_mempool librte_ring librte_mbuf
DEPDIRS-librte_compressdev += librte_kvargs
eventdev: implement the northbound APIs This patch implements northbound eventdev API interface using southbond driver interface Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2016-12-06 01:51:46 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_EVENTDEV) += librte_eventdev
eventdev: add driver interface of crypto adapter This patch defines capabilities & functions to be called for eventdev PMDs. Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com> Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com> Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
2018-05-09 08:17:58 +00:00
DEPDIRS-librte_eventdev := librte_eal librte_ring librte_ethdev librte_hash \
librte_mempool librte_timer librte_cryptodev
rawdev: introduce raw device library Each device in DPDK has a type associated with it - ethernet, crypto, event etc. This patch introduces 'rawdevice' which is a generic type of device, not currently handled out-of-the-box by DPDK. A device which can be scanned on an installed bus (pci, fslmc, ...) or instantiated through devargs, can be interfaced using standardized APIs just like other standardized devices. This library introduces an API set which can be plugged on the northbound side to the application layer, and on the southbound side to the driver layer. The APIs of rawdev library exposes some generic operations which can enable configuration and I/O with the raw devices. Using opaque data (pointer) as API arguments, library allows a high flexibility for application and driver implementation. This patch introduces basic device operations like start, stop, reset, queue and info support. Subsequent patches would introduce other operations like buffer enqueue/dequeue and firmware support. Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
2018-01-31 09:13:09 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_RAWDEV) += librte_rawdev
ethdev: rename folder to library name Library folder name and output library name are same except a few flaws including librte_ether. This library is network device abstraction layer, the name "ethdev" fits better than "ether", and library & header files already named as ethdev. Also there is a rte_ether.h in the net library which can cause confusion. Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2018-04-26 21:25:59 +00:00
DEPDIRS-librte_rawdev := librte_eal librte_ethdev
vhost: add makefile vhost lib is turned off by default. vhost lib is based on cuse, which requires fuse development package to be installed. Signed-off-by: Huawei Xie <huawei.xie@intel.com> Acked-by: Changchun Ouyang <changchun.ouyang@intel.com> [Thomas: fix build dependencies]
2014-10-08 18:54:59 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_VHOST) += librte_vhost
ethdev: rename folder to library name Library folder name and output library name are same except a few flaws including librte_ether. This library is network device abstraction layer, the name "ethdev" fits better than "ether", and library & header files already named as ethdev. Also there is a rte_ether.h in the net library which can cause confusion. Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2018-04-26 21:25:59 +00:00
DEPDIRS-librte_vhost := librte_eal librte_mempool librte_mbuf librte_ethdev \
vhost: introduce vDPA device class This patch introduces vDPA device class. It will enable application to iterate over the vDPA devices. Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com> Acked-by: Adrián Moreno <amorenoz@redhat.com>
2020-06-26 14:04:30 +00:00
librte_net librte_hash librte_cryptodev \
librte_pci
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_HASH) += librte_hash
mk: optimize directory dependencies Before this patch, the management of dependencies between directories had several issues: - the generation of .depdirs, done at configuration is slow: it can take more than one minute on some slow targets (usually ~10s on a standard PC without -j). - for instance, it is possible to express a dependency like: - app/foo depends on lib/librte_foo - and lib/librte_foo depends on app/bar But this won't work because the directories are traversed with a depth-first algorithm, so we have to choose between doing 'app' before or after 'lib'. - the script depdirs-rule.sh is too complex. - we cannot use "make -d" for debug, because the output of make is used for the generation of .depdirs. This patch moves the DEPDIRS-* variables in the upper Makefile, making the dependencies much easier to calculate. A DEPDIRS variable is still used to process library dependencies in LDLIBS. After this commit, "make config" is almost immediate. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Robin Jarry <robin.jarry@6wind.com> Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2017-03-24 13:21:31 +00:00
DEPDIRS-librte_hash := librte_eal librte_ring
efd: new Elastic Flow Distributor library Elastic Flow Distributor (EFD) is a distributor library that uses perfect hashing to determine a target/value for a given incoming flow key. It has the following advantages: - First, because it uses perfect hashing, it does not store the key itself and hence lookup performance is not dependent on the key size. - Second, the target/value can be any arbitrary value hence the system designer and/or operator can better optimize service rates and inter-cluster network traffic locating. - Third, since the storage requirement is much smaller than a hash-based flow table (i.e. better fit for CPU cache), EFD can scale to millions of flow keys. Finally, with current optimized library implementation performance is fully scalable with number of CPU cores. Signed-off-by: Byron Marohn <byron.marohn@intel.com> Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Signed-off-by: Saikrishna Edupuganti <saikrishna.edupuganti@intel.com> Acked-by: Christian Maciocco <christian.maciocco@intel.com>
2017-01-17 22:23:51 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_EFD) += librte_efd
mk: optimize directory dependencies Before this patch, the management of dependencies between directories had several issues: - the generation of .depdirs, done at configuration is slow: it can take more than one minute on some slow targets (usually ~10s on a standard PC without -j). - for instance, it is possible to express a dependency like: - app/foo depends on lib/librte_foo - and lib/librte_foo depends on app/bar But this won't work because the directories are traversed with a depth-first algorithm, so we have to choose between doing 'app' before or after 'lib'. - the script depdirs-rule.sh is too complex. - we cannot use "make -d" for debug, because the output of make is used for the generation of .depdirs. This patch moves the DEPDIRS-* variables in the upper Makefile, making the dependencies much easier to calculate. A DEPDIRS variable is still used to process library dependencies in LDLIBS. After this commit, "make config" is almost immediate. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Robin Jarry <robin.jarry@6wind.com> Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2017-03-24 13:21:31 +00:00
DEPDIRS-librte_efd := librte_eal librte_ring librte_hash
rib: add RIB library Add RIB (Routing Information Base) library. This library implements an IPv4 routing table optimized for control plane operations. It implements a control plane struct containing routes in a tree and provides fast add/del operations for routes. Also it allows to perform fast subtree traversals (i.e. retrieve existing subroutes for a given prefix). This structure will be used as a control plane helper structure for FIB implementation. Also it might be used standalone in other different places such as bitmaps for example. Internal implementation is level compressed binary trie. Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
2019-11-01 15:21:34 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_RIB) += librte_rib
DEPDIRS-librte_rib := librte_eal librte_mempool
fib: add FIB library Add FIB (Forwarding Information Base) library. This library implements a dataplane structures and algorithms designed for fast longest prefix match. Internally it consists of two parts - RIB (control plane ops) and implementation for the dataplane tasks. Initial version provides two implementations for both IPv4 and IPv6: dummy (uses RIB as a dataplane) and DIR24_8 (same as current LPM) Due to proposed design it allows to extend FIB with new algorithms in future (for example DXR, poptrie, etc). Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
2019-11-01 15:21:38 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_FIB) += librte_fib
DEPDIRS-librte_fib := librte_eal librte_rib
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_LPM) += librte_lpm
lpm6: store rules in hash table Rework the lpm6 rule subsystem and replace current rules algorithm complexity O(n) with hashtables which allow dealing with large (50k) rule sets. Signed-off-by: Alex Kiselev <alex@therouter.net> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2018-09-18 10:57:09 +00:00
DEPDIRS-librte_lpm := librte_eal librte_hash
acl: new library The ACL library is used to perform an N-tuple search over a set of rules with multiple categories and find the best match for each category. Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com> [Thomas: some code-style changes]
2014-06-13 11:26:50 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_ACL) += librte_acl
mk: optimize directory dependencies Before this patch, the management of dependencies between directories had several issues: - the generation of .depdirs, done at configuration is slow: it can take more than one minute on some slow targets (usually ~10s on a standard PC without -j). - for instance, it is possible to express a dependency like: - app/foo depends on lib/librte_foo - and lib/librte_foo depends on app/bar But this won't work because the directories are traversed with a depth-first algorithm, so we have to choose between doing 'app' before or after 'lib'. - the script depdirs-rule.sh is too complex. - we cannot use "make -d" for debug, because the output of make is used for the generation of .depdirs. This patch moves the DEPDIRS-* variables in the upper Makefile, making the dependencies much easier to calculate. A DEPDIRS variable is still used to process library dependencies in LDLIBS. After this commit, "make config" is almost immediate. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Robin Jarry <robin.jarry@6wind.com> Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2017-03-24 13:21:31 +00:00
DEPDIRS-librte_acl := librte_eal
member: implement main API Membership library is an extension and generalization of a traditional filter (for example Bloom Filter and cuckoo filter) structure. In general, the Membership library is a data structure that provides a "set-summary" and responds to set-membership queries of whether a certain element belongs to a set(s). A membership test for an element will return the set this element belongs to or not-found if the element is never inserted into the set-summary. The results of the membership test are not 100% accurate. Certain false positive or false negative probability could exist. However, comparing to a "full-blown" complete list of elements, a "set-summary" is memory efficient and fast on lookup. This patch adds the main API definition. Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com> Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2017-10-04 03:12:19 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_MEMBER) += librte_member
DEPDIRS-librte_member := librte_eal librte_hash
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_NET) += librte_net
net: add CRC computation API APIs for selecting the architecure specific implementation and computing the crc (16-bit and 32-bit CRCs) are added. For CRCs calculation, scalar as well as x86 intrinsic(sse4.2) versions are implemented. The scalar version is based on generic Look-Up Table(LUT) algorithm, while x86 intrinsic version uses carry-less multiplication for fast CRC computation. Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2017-04-05 20:49:49 +00:00
DEPDIRS-librte_net := librte_mbuf librte_eal
ip_frag: move fragmentation/reassembly headers into a library Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-05-28 17:32:35 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_IP_FRAG) += librte_ip_frag
ethdev: rename folder to library name Library folder name and output library name are same except a few flaws including librte_ether. This library is network device abstraction layer, the name "ethdev" fits better than "ether", and library & header files already named as ethdev. Also there is a rte_ether.h in the net library which can cause confusion. Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2018-04-26 21:25:59 +00:00
DEPDIRS-librte_ip_frag := librte_eal librte_mempool librte_mbuf librte_ethdev
mk: optimize directory dependencies Before this patch, the management of dependencies between directories had several issues: - the generation of .depdirs, done at configuration is slow: it can take more than one minute on some slow targets (usually ~10s on a standard PC without -j). - for instance, it is possible to express a dependency like: - app/foo depends on lib/librte_foo - and lib/librte_foo depends on app/bar But this won't work because the directories are traversed with a depth-first algorithm, so we have to choose between doing 'app' before or after 'lib'. - the script depdirs-rule.sh is too complex. - we cannot use "make -d" for debug, because the output of make is used for the generation of .depdirs. This patch moves the DEPDIRS-* variables in the upper Makefile, making the dependencies much easier to calculate. A DEPDIRS variable is still used to process library dependencies in LDLIBS. After this commit, "make config" is almost immediate. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Robin Jarry <robin.jarry@6wind.com> Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2017-03-24 13:21:31 +00:00
DEPDIRS-librte_ip_frag += librte_hash
lib/gro: add Generic Receive Offload API framework Generic Receive Offload (GRO) is a widely used SW-based offloading technique to reduce per-packet processing overhead. It gains performance by reassembling small packets into large ones. This patchset is to support GRO in DPDK. To support GRO, this patch implements a GRO API framework. To enable more flexibility to applications, DPDK GRO is implemented as a user library. Applications explicitly use the GRO library to merge small packets into large ones. DPDK GRO provides two reassembly modes. One is called lightweight mode, the other is called heavyweight mode. If applications want to merge packets in a simple way and the number of packets is relatively small, they can use the lightweight mode. If applications need more fine-grained controls, they can choose the heavyweight mode. rte_gro_reassemble_burst is the main reassembly API which is used in lightweight mode and processes N packets at a time. For applications, performing GRO in lightweight mode is simple. They just need to invoke rte_gro_reassemble_burst. Applications can get GROed packets as soon as rte_gro_reassemble_burst returns. rte_gro_reassemble is the main reassembly API which is used in heavyweight mode and tries to merge N inputted packets with the packets in GRO reassembly tables. For applications, performing GRO in heavyweight mode is relatively complicated. Before performing GRO, applications need to create a GRO context object, which keeps reassembly tables of desired GRO types, by rte_gro_ctx_create. Then applications can use rte_gro_reassemble to merge packets. The GROed packets are in the reassembly tables of the GRO context object. If applications want to get them, applications need to manually flush them by flush API. Signed-off-by: Jiayu Hu <jiayu.hu@intel.com> Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
2017-07-09 05:46:44 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_GRO) += librte_gro
ethdev: rename folder to library name Library folder name and output library name are same except a few flaws including librte_ether. This library is network device abstraction layer, the name "ethdev" fits better than "ether", and library & header files already named as ethdev. Also there is a rte_ether.h in the net library which can cause confusion. Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2018-04-26 21:25:59 +00:00
DEPDIRS-librte_gro := librte_eal librte_mbuf librte_ethdev librte_net
jobstats: new library This library provide API to measure time spend in particular parts of code and to calculate optimal polling time. To calculate a those statistics application code need to be divided into parts (called jobs) that do something. It is up to application to decide what is considered a job. Series of jobs must be surrounded with the rte_jobstats_context_start() and rte_jobstats_context_finish() calls. After that, jobs might be started. Each job must be surrounded with rte_jobstats_start() and rte_jobstats_finish() calls. After job finishes its execution, period in which it should be called again is adjusted. It might be used to minimize time wasted on unnecessary polls/calls. Adjustment is based on data provided by job itself (ex: number of packets it processed). After all jobs in serie are executed fallowing statistics are updated and might be used by application. Statistics can be reset. Some of provided statistic data: - total/min/max execution - time spent in executing jobs. - total/min/max management - time spent outside execution area. This value might be used to measure overhead of scheduling jobs. This time also contains overhead of rte_jobstats library itself. - number of loops that executed at least one job - executed jobs - time when statistics were reset. Each job provide total/min/max execution time and execution count statistics. Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-24 16:33:23 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_JOBSTATS) += librte_jobstats
mk: optimize directory dependencies Before this patch, the management of dependencies between directories had several issues: - the generation of .depdirs, done at configuration is slow: it can take more than one minute on some slow targets (usually ~10s on a standard PC without -j). - for instance, it is possible to express a dependency like: - app/foo depends on lib/librte_foo - and lib/librte_foo depends on app/bar But this won't work because the directories are traversed with a depth-first algorithm, so we have to choose between doing 'app' before or after 'lib'. - the script depdirs-rule.sh is too complex. - we cannot use "make -d" for debug, because the output of make is used for the generation of .depdirs. This patch moves the DEPDIRS-* variables in the upper Makefile, making the dependencies much easier to calculate. A DEPDIRS variable is still used to process library dependencies in LDLIBS. After this commit, "make config" is almost immediate. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Robin Jarry <robin.jarry@6wind.com> Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2017-03-24 13:21:31 +00:00
DEPDIRS-librte_jobstats := librte_eal
metrics: add information metrics library This patch adds a new information metrics library. This Metrics library implements a mechanism by which producers can publish numeric information for later querying by consumers. Metrics themselves are statistics that are not generated by PMDs, and hence are not reported via ethdev extended statistics. Metric information is populated using a push model, where producers update the values contained within the metric library by calling an update function on the relevant metrics. Consumers receive metric information by querying the central metric data, which is held in shared memory. Signed-off-by: Remy Horton <remy.horton@intel.com>
2017-03-30 21:00:57 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_METRICS) += librte_metrics
telemetry: move some functions to metrics library This commit moves some of the telemetry library code to a new file in the metrics library. No modifications are made to the moved code, except what is needed to allow it to compile and run. The additional code in metrics is built only when the Jansson library is present. Telemetry functions as normal, using the functions from the metrics_telemetry file. This move will enable code be reused by the new version of telemetry in a later commit, to support backward compatibility with the existing telemetry usage. Signed-off-by: Ciara Power <ciara.power@intel.com> Reviewed-by: Keith Wiles <keith.wiles@intel.com>
2020-04-30 16:01:21 +00:00
DEPDIRS-librte_metrics := librte_eal librte_ethdev
telemetry: invert dependency on metrics library Rather than having the telemetry library depend on the metrics lib we invert the dependency so that metrics instead depends on telemetry lib, and registers the needed functions with it at init time. This prepares the way for a cleaner telemetry architecture to be applied in later patches. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Reviewed-by: Keith Wiles <keith.wiles@intel.com>
2020-04-30 16:01:23 +00:00
ifeq ($(CONFIG_RTE_LIBRTE_TELEMETRY),y)
DEPDIRS-librte_metrics += librte_telemetry
endif
bitrate: add bitrate statistics library This patch adds a library that calculates peak and average data-rate statistics. For ethernet devices. These statistics are reported using the metrics library. Signed-off-by: Remy Horton <remy.horton@intel.com>
2017-03-30 21:00:59 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_BITRATE) += librte_bitratestats
ethdev: rename folder to library name Library folder name and output library name are same except a few flaws including librte_ether. This library is network device abstraction layer, the name "ethdev" fits better than "ether", and library & header files already named as ethdev. Also there is a rte_ether.h in the net library which can cause confusion. Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2018-04-26 21:25:59 +00:00
DEPDIRS-librte_bitratestats := librte_eal librte_metrics librte_ethdev
latency: added new library for latency stats Add a library designed to calculate latency statistics and report them to the application when queried. The library measures minimum, average and maximum latencies, and jitter in nano seconds. The current implementation supports global latency stats, i.e. per application stats. Signed-off-by: Reshma Pattan <reshma.pattan@intel.com> Signed-off-by: Remy Horton <remy.horton@intel.com> Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
2017-03-30 21:01:01 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_LATENCY_STATS) += librte_latencystats
ethdev: rename folder to library name Library folder name and output library name are same except a few flaws including librte_ether. This library is network device abstraction layer, the name "ethdev" fits better than "ether", and library & header files already named as ethdev. Also there is a rte_ether.h in the net library which can cause confusion. Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2018-04-26 21:25:59 +00:00
DEPDIRS-librte_latencystats := librte_eal librte_metrics librte_ethdev librte_mbuf
power: initial import Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_POWER) += librte_power
power: fix traffic aware build 1. %ld to PRId64 for 32-bit builds 2. Fix dependency on librte_timer Fixes: 450f0791312c ("power: add traffic pattern aware power control") Signed-off-by: David Hunt <david.hunt@intel.com> Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
2018-10-26 12:38:24 +00:00
DEPDIRS-librte_power := librte_eal librte_timer
meter: initial import Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_METER) += librte_meter
mk: optimize directory dependencies Before this patch, the management of dependencies between directories had several issues: - the generation of .depdirs, done at configuration is slow: it can take more than one minute on some slow targets (usually ~10s on a standard PC without -j). - for instance, it is possible to express a dependency like: - app/foo depends on lib/librte_foo - and lib/librte_foo depends on app/bar But this won't work because the directories are traversed with a depth-first algorithm, so we have to choose between doing 'app' before or after 'lib'. - the script depdirs-rule.sh is too complex. - we cannot use "make -d" for debug, because the output of make is used for the generation of .depdirs. This patch moves the DEPDIRS-* variables in the upper Makefile, making the dependencies much easier to calculate. A DEPDIRS variable is still used to process library dependencies in LDLIBS. After this commit, "make config" is almost immediate. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Robin Jarry <robin.jarry@6wind.com> Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2017-03-24 13:21:31 +00:00
DEPDIRS-librte_meter := librte_eal
flow_classify: introduce flow classify library The following APIs's are implemented in the librte_flow_classify library: rte_flow_classifier_create rte_flow_classifier_free rte_flow_classifier_query rte_flow_classify_table_create rte_flow_classify_table_entry_add rte_flow_classify_table_entry_delete The following librte_table API's are used: f_create to create a table. f_add to add a rule to the table. f_del to delete a rule from the table. f_free to free a table f_lookup to match packets with the rules. The library supports counting of IPv4 five tupple packets only, ie IPv4 UDP, TCP and SCTP packets. Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
2017-10-24 17:28:00 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_FLOW_CLASSIFY) += librte_flow_classify
DEPDIRS-librte_flow_classify := librte_net librte_table librte_acl
sched: initial import Signed-off-by: Intel
2013-06-03 00:00:00 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_SCHED) += librte_sched
mk: optimize directory dependencies Before this patch, the management of dependencies between directories had several issues: - the generation of .depdirs, done at configuration is slow: it can take more than one minute on some slow targets (usually ~10s on a standard PC without -j). - for instance, it is possible to express a dependency like: - app/foo depends on lib/librte_foo - and lib/librte_foo depends on app/bar But this won't work because the directories are traversed with a depth-first algorithm, so we have to choose between doing 'app' before or after 'lib'. - the script depdirs-rule.sh is too complex. - we cannot use "make -d" for debug, because the output of make is used for the generation of .depdirs. This patch moves the DEPDIRS-* variables in the upper Makefile, making the dependencies much easier to calculate. A DEPDIRS variable is still used to process library dependencies in LDLIBS. After this commit, "make config" is almost immediate. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Robin Jarry <robin.jarry@6wind.com> Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2017-03-24 13:21:31 +00:00
DEPDIRS-librte_sched := librte_eal librte_mempool librte_mbuf librte_net
DEPDIRS-librte_sched += librte_timer
distributor: new packet distributor library This adds the code for a new Intel DPDK library for packet distribution. The distributor is a component which is designed to pass packets one-at-a-time to workers, with dynamic load balancing. Using the RSS field in the mbuf as a tag, the distributor tracks what packet tag is being processed by what worker and then ensures that no two packets with the same tag are in-flight simultaneously. Once a tag is not in-flight, then the next packet with that tag will be sent to the next available core. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Tested-by: Waterman Cao <waterman.cao@intel.com> [Thomas: add doxygen @file comment]
2014-05-29 10:12:14 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += librte_distributor
ethdev: rename folder to library name Library folder name and output library name are same except a few flaws including librte_ether. This library is network device abstraction layer, the name "ethdev" fits better than "ether", and library & header files already named as ethdev. Also there is a rte_ether.h in the net library which can cause confusion. Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2018-04-26 21:25:59 +00:00
DEPDIRS-librte_distributor := librte_eal librte_mbuf librte_ethdev
port: new packet framework API This file defines the port operations that have to be implemented by Packet Framework ports. Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com> Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com> Acked by: Ivan Boule <ivan.boule@6wind.com>
2014-06-04 18:08:19 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_PORT) += librte_port
ethdev: rename folder to library name Library folder name and output library name are same except a few flaws including librte_ether. This library is network device abstraction layer, the name "ethdev" fits better than "ether", and library & header files already named as ethdev. Also there is a rte_ether.h in the net library which can cause confusion. Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2018-04-26 21:25:59 +00:00
DEPDIRS-librte_port := librte_eal librte_mempool librte_mbuf librte_ethdev
port: fix build dependency The port library should be built after eventdev library. Fixes: 5d92c4e592c4 ("port: add eventdev port type") Cc: stable@dpdk.org Signed-off-by: Rahul R Shah <rahul.r.shah@intel.com> Tested-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
2019-11-06 14:43:20 +00:00
DEPDIRS-librte_port += librte_ip_frag librte_sched librte_eventdev
mk: fix dependencies to optional configs In rte.lib.mk, the list of libraries passed to the link command (LDLIBS) is generated from the DEPDIRS-xxx variables. If a library is not compiled because it is disabled in configuration, it should not appear in DEPDIRS-xxx. - librte_port depends on librte_kni only if it is enabled. - librte_table depends on librte_acl only if it is enabled. Fixes: feb9f680cd2c ("mk: optimize directory dependencies") Reported-by: Ferruh Yigit <ferruh.yigit@intel.com> Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
2017-03-30 12:32:28 +00:00
ifeq ($(CONFIG_RTE_LIBRTE_KNI),y)
DEPDIRS-librte_port += librte_kni
endif
table: new packet framework API This file defines the operations to be implemented by any Packet Framework table. Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com> Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com> Acked by: Ivan Boule <ivan.boule@6wind.com>
2014-06-04 18:08:27 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_TABLE) += librte_table
mk: optimize directory dependencies Before this patch, the management of dependencies between directories had several issues: - the generation of .depdirs, done at configuration is slow: it can take more than one minute on some slow targets (usually ~10s on a standard PC without -j). - for instance, it is possible to express a dependency like: - app/foo depends on lib/librte_foo - and lib/librte_foo depends on app/bar But this won't work because the directories are traversed with a depth-first algorithm, so we have to choose between doing 'app' before or after 'lib'. - the script depdirs-rule.sh is too complex. - we cannot use "make -d" for debug, because the output of make is used for the generation of .depdirs. This patch moves the DEPDIRS-* variables in the upper Makefile, making the dependencies much easier to calculate. A DEPDIRS variable is still used to process library dependencies in LDLIBS. After this commit, "make config" is almost immediate. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Robin Jarry <robin.jarry@6wind.com> Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2017-03-24 13:21:31 +00:00
DEPDIRS-librte_table := librte_eal librte_mempool librte_mbuf
mk: fix dependencies to optional configs In rte.lib.mk, the list of libraries passed to the link command (LDLIBS) is generated from the DEPDIRS-xxx variables. If a library is not compiled because it is disabled in configuration, it should not appear in DEPDIRS-xxx. - librte_port depends on librte_kni only if it is enabled. - librte_table depends on librte_acl only if it is enabled. Fixes: feb9f680cd2c ("mk: optimize directory dependencies") Reported-by: Ferruh Yigit <ferruh.yigit@intel.com> Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
2017-03-30 12:32:28 +00:00
DEPDIRS-librte_table += librte_port librte_lpm librte_hash
ifeq ($(CONFIG_RTE_LIBRTE_ACL),y)
DEPDIRS-librte_table += librte_acl
endif
pipeline: new packet framework logic The Packet Framework pipeline library provides a standard methodology (logically similar to OpenFlow) for rapid development of complex packet processing pipelines out of ports, tables and actions. A pipeline is constructed by connecting its input ports to its output ports through a chain of lookup tables. As result of lookup operation into the current table, one of the table entries (or the default table entry, in case of lookup miss) is identified to provide the actions to be executed on the current packet and the associated action meta-data. The behavior of user actions is defined through the configurable table action handler, while the reserved actions define the next hop for the current packet (either another table, an output port or packet drop) and are handled transparently by the framework. Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com> Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com> Acked by: Ivan Boule <ivan.boule@6wind.com>
2014-06-04 18:08:35 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_PIPELINE) += librte_pipeline
mk: optimize directory dependencies Before this patch, the management of dependencies between directories had several issues: - the generation of .depdirs, done at configuration is slow: it can take more than one minute on some slow targets (usually ~10s on a standard PC without -j). - for instance, it is possible to express a dependency like: - app/foo depends on lib/librte_foo - and lib/librte_foo depends on app/bar But this won't work because the directories are traversed with a depth-first algorithm, so we have to choose between doing 'app' before or after 'lib'. - the script depdirs-rule.sh is too complex. - we cannot use "make -d" for debug, because the output of make is used for the generation of .depdirs. This patch moves the DEPDIRS-* variables in the upper Makefile, making the dependencies much easier to calculate. A DEPDIRS variable is still used to process library dependencies in LDLIBS. After this commit, "make config" is almost immediate. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Robin Jarry <robin.jarry@6wind.com> Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2017-03-24 13:21:31 +00:00
DEPDIRS-librte_pipeline := librte_eal librte_mempool librte_mbuf
DEPDIRS-librte_pipeline += librte_table librte_port
reorder: new library This library provides reordering capability for out of order mbufs based on a sequence number in the mbuf structure. Signed-off-by: Reshma Pattan <reshma.pattan@intel.com> Signed-off-by: Richardson Bruce <bruce.richardson@intel.com> Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Declan Doherty <declan.doherty@intel.com>
2015-02-18 14:58:13 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_REORDER) += librte_reorder
mk: optimize directory dependencies Before this patch, the management of dependencies between directories had several issues: - the generation of .depdirs, done at configuration is slow: it can take more than one minute on some slow targets (usually ~10s on a standard PC without -j). - for instance, it is possible to express a dependency like: - app/foo depends on lib/librte_foo - and lib/librte_foo depends on app/bar But this won't work because the directories are traversed with a depth-first algorithm, so we have to choose between doing 'app' before or after 'lib'. - the script depdirs-rule.sh is too complex. - we cannot use "make -d" for debug, because the output of make is used for the generation of .depdirs. This patch moves the DEPDIRS-* variables in the upper Makefile, making the dependencies much easier to calculate. A DEPDIRS variable is still used to process library dependencies in LDLIBS. After this commit, "make config" is almost immediate. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Robin Jarry <robin.jarry@6wind.com> Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2017-03-24 13:21:31 +00:00
DEPDIRS-librte_reorder := librte_eal librte_mempool librte_mbuf
pdump: add new library for packet capture The librte_pdump library provides a framework for packet capturing in dpdk. The library provides set of APIs to initialize the packet capture framework, to enable or disable the packet capture, and to uninitialize it. The librte_pdump library works on a client/server model. The server is responsible for enabling or disabling the packet capture and the clients are responsible for requesting the enabling or disabling of the packet capture. Enabling APIs are supported with port, queue, ring and mempool parameters. Applications should pass on this information to get the packets from the dpdk ports. For enabling requests from applications, library creates the client request containing the mempool, ring, port and queue information and sends the request to the server. After receiving the request, server registers the Rx and Tx callbacks for all the port and queues. After the callbacks registration, registered callbacks will get the Rx and Tx packets. Packets then will be copied to the new mbufs that are allocated from the user passed mempool. These new mbufs then will be enqueued to the application passed ring. Applications need to dequeue the mbufs from the rings and direct them to the devices like pcap vdev for viewing the packets outside of the dpdk using the packet capture tools. For disabling requests, library creates the client request containing the port and queue information and sends the request to the server. After receiving the request, server removes the Rx and Tx callback for all the port and queues. Signed-off-by: Reshma Pattan <reshma.pattan@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2016-06-15 14:06:22 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_PDUMP) += librte_pdump
ethdev: rename folder to library name Library folder name and output library name are same except a few flaws including librte_ether. This library is network device abstraction layer, the name "ethdev" fits better than "ether", and library & header files already named as ethdev. Also there is a rte_ether.h in the net library which can cause confusion. Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2018-04-26 21:25:59 +00:00
DEPDIRS-librte_pdump := librte_eal librte_mempool librte_mbuf librte_ethdev
gso: add Generic Segmentation Offload API framework Generic Segmentation Offload (GSO) is a SW technique to split large packets into small ones. Akin to TSO, GSO enables applications to operate on large packets, thus reducing per-packet processing overhead. To enable more flexibility to applications, DPDK GSO is implemented as a standalone library. Applications explicitly use the GSO library to segment packets. To segment a packet requires two steps. The first is to set proper flags to mbuf->ol_flags, where the flags are the same as that of TSO. The second is to call the segmentation API, rte_gso_segment(). This patch introduces the GSO API framework to DPDK. rte_gso_segment() splits an input packet into small ones in each invocation. The GSO library refers to these small packets generated by rte_gso_segment() as GSO segments. Each of the newly-created GSO segments is organized as a two-segment MBUF, where the first segment is a standard MBUF, which stores a copy of packet header, and the second is an indirect MBUF which points to a section of data in the input packet. rte_gso_segment() reduces the refcnt of the input packet by 1. Therefore, when all GSO segments are freed, the input packet is freed automatically. Additionally, since each GSO segment has multiple MBUFs (i.e. 2 MBUFs), the driver of the interface which the GSO segments are sent to should support to transmit multi-segment packets. The GSO framework clears the PKT_TX_TCP_SEG flag for both the input packet, and all produced GSO segments in the event of success, since segmentation in hardware is no longer required at that point. Signed-off-by: Jiayu Hu <jiayu.hu@intel.com> Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2017-10-07 14:56:39 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_GSO) += librte_gso
ethdev: rename folder to library name Library folder name and output library name are same except a few flaws including librte_ether. This library is network device abstraction layer, the name "ethdev" fits better than "ether", and library & header files already named as ethdev. Also there is a rte_ether.h in the net library which can cause confusion. Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2018-04-26 21:25:59 +00:00
DEPDIRS-librte_gso := librte_eal librte_mbuf librte_ethdev librte_net
mk: do not generate LDLIBS from directory dependencies The list of libraries in LDLIBS was generated from the DEPDIRS-xyz variable. This is valid when the subdirectory name match the library name, but it's not always the case, especially for PMDs. The patches removes this feature and explicitly adds the proper libraries in LDLIBS. Some DEPDIRS-xyz variables become useless, remove them. Reported-by: Gage Eads <gage.eads@intel.com> Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Reviewed-by: Gage Eads <gage.eads@intel.com>
2017-10-12 16:04:21 +00:00
DEPDIRS-librte_gso += librte_mempool
bpf: add BPF loading and execution framework librte_bpf provides a framework to load and execute eBPF bytecode inside user-space dpdk based applications. It supports basic set of features from eBPF spec (https://www.kernel.org/doc/Documentation/networking/filter.txt). Not currently supported features: - JIT - cBPF - tail-pointer call - eBPF MAP - skb - function calls for 32-bit apps - mbuf pointer as input parameter for 32-bit apps Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
2018-05-10 10:23:03 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_BPF) += librte_bpf
DEPDIRS-librte_bpf := librte_eal librte_mempool librte_mbuf librte_ethdev
lib: introduce IPsec library Introduce librte_ipsec library. The library is supposed to utilize existing DPDK crypto-dev and security API to provide application with transparent IPsec processing API. That initial commit provides some base API to manage IPsec Security Association (SA) object. Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com> Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Declan Doherty <declan.doherty@intel.com> Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
2019-01-10 21:06:28 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_IPSEC) += librte_ipsec
ipsec: fix transport mode for IPv6 with extensions Reconstructing IPv6 header after encryption or decryption requires updating 'next header' value in the preceding protocol header, which is determined by parsing IPv6 header and iteratively looking for next IPv6 header extension. It is required that 'l3_len' in the mbuf metadata contains a total length of the IPv6 header with header extensions up to ESP header. Fixes: 4d7ea3e1459b ("ipsec: implement SA data-path API") Cc: stable@dpdk.org Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Akhil Goyal <akhil.goyal@nxp.com> Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2019-06-24 13:39:58 +00:00
DEPDIRS-librte_ipsec := librte_eal librte_mbuf librte_cryptodev librte_security \
ipsec: fix build dependency on hash lib rte_ipsec has a dependency on rte_hash So we need the librte_hash to be compiled before librte_ipsec. Add the DEPDIRs to make sure this. Fixes: 3feb23609cae ("ipsec: add SAD create/destroy implementation") Cc: stable@dpdk.org Reported-by: Raslan Darawsheh <rasland@mellanox.com> Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com> Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
2020-04-16 11:25:17 +00:00
librte_net librte_hash
rcu: add RCU library supporting QSBR mechanism Add RCU library supporting quiescent state based memory reclamation method. This library helps identify the quiescent state of the reader threads so that the writers can free the memory associated with the lock less data structures. Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com> Reviewed-by: Steve Capper <steve.capper@arm.com> Reviewed-by: Gavin Hu <gavin.hu@arm.com> Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com> Acked-by: Paul E. McKenney <paulmck@linux.ibm.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Tested-by: Jerin Jacob <jerinj@marvell.com> Tested-by: Ruifeng Wang <ruifeng.wang@arm.com> Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
2019-05-01 03:54:16 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_RCU) += librte_rcu
rcu: add resource reclamation APIs Add resource reclamation using defer queues to make it simple for applications and libraries to integrate rte_rcu library. Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com> Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com> Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2020-04-22 03:30:03 +00:00
DEPDIRS-librte_rcu := librte_eal librte_ring
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
graph: define API Graph architecture abstracts the data processing functions as "node" and "link" them together to create a complex "graph" to enable reusable/modular data processing functions. These APIs enables graph framework operations such as create, lookup, dump and destroy on graph and node operations such as clone, edge update, and edge shrink, etc. The API also allows creating the stats cluster to monitor per graph and per node stats. This patch defines the public API for graph support. This patch also adds support for the build infrastructure and update the MAINTAINERS file for the graph subsystem. Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: Kiran Kumar K <kirankumark@marvell.com> Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com> Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
2020-04-11 14:14:00 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_GRAPH) += librte_graph
DEPDIRS-librte_graph := librte_eal
node: add logging and null node Add log infra for node specific logging. Also, add null rte_node that just ignores all the objects directed to it. Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com> Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
2020-04-11 14:14:14 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_NODE) += librte_node
DEPDIRS-librte_node := librte_graph librte_lpm librte_ethdev librte_mbuf
build/linux: rename macro from LINUXAPP to LINUX Rename the macro to make things shorter and more comprehensible. For both meson and make builds, keep the old macro around for backward compatibility. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
2019-03-06 16:22:39 +00:00
ifeq ($(CONFIG_RTE_EXEC_ENV_LINUX),y)
kni: initial import Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_KNI) += librte_kni
endif
ethdev: rename folder to library name Library folder name and output library name are same except a few flaws including librte_ether. This library is network device abstraction layer, the name "ethdev" fits better than "ether", and library & header files already named as ethdev. Also there is a rte_ether.h in the net library which can cause confusion. Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2018-04-26 21:25:59 +00:00
DEPDIRS-librte_kni := librte_eal librte_mempool librte_mbuf librte_ethdev
kni: fix build dependency kni library has a dependency to new PCI library, adding that dependency. build error: CC rte_kni.o In file included from dpdk/lib/librte_kni/rte_kni.c:48:0: dpdk/build/include/rte_kni.h:49:21: fatal error: rte_pci.h: No such file or directory #include <rte_pci.h> ^ Fixes: c752998b5e2e ("pci: introduce library and driver") Cc: stable@dpdk.org Reported-by: Bernard Iremonger <bernard.iremonger@intel.com> Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
2017-12-12 18:39:56 +00:00
DEPDIRS-librte_kni += librte_pci
kni: initial import Signed-off-by: Intel
2012-12-19 23:00:00 +00:00
first public release version 1.2.3 Signed-off-by: Intel
2012-09-04 12:54:00 +00:00
include $(RTE_SDK)/mk/rte.subdir.mk
Reference in New Issue Copy Permalink