numam-dpdk/app/test-crypto-perf/cperf_test_latency.c

380 lines
9.8 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright(c) 2016-2017 Intel Corporation
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
*/
#include <rte_malloc.h>
#include <rte_cycles.h>
#include <rte_crypto.h>
#include <rte_cryptodev.h>
#include "cperf_test_latency.h"
#include "cperf_ops.h"
#include "cperf_test_common.h"
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
struct cperf_op_result {
uint64_t tsc_start;
uint64_t tsc_end;
enum rte_crypto_op_status status;
};
struct cperf_latency_ctx {
uint8_t dev_id;
uint16_t qp_id;
uint8_t lcore_id;
struct rte_mempool *pool;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
struct rte_cryptodev_sym_session *sess;
cperf_populate_ops_t populate_ops;
uint32_t src_buf_offset;
uint32_t dst_buf_offset;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
const struct cperf_options *options;
const struct cperf_test_vector *test_vector;
struct cperf_op_result *res;
};
struct priv_op_data {
struct cperf_op_result *result;
};
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
#define max(a, b) (a > b ? (uint64_t)a : (uint64_t)b)
#define min(a, b) (a < b ? (uint64_t)a : (uint64_t)b)
static void
cperf_latency_test_free(struct cperf_latency_ctx *ctx)
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
{
if (ctx) {
if (ctx->sess) {
rte_cryptodev_sym_session_clear(ctx->dev_id, ctx->sess);
rte_cryptodev_sym_session_free(ctx->sess);
}
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
if (ctx->pool)
rte_mempool_free(ctx->pool);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
rte_free(ctx->res);
rte_free(ctx);
}
}
void *
cperf_latency_test_constructor(struct rte_mempool *sess_mp,
uint8_t dev_id, uint16_t qp_id,
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
const struct cperf_options *options,
const struct cperf_test_vector *test_vector,
const struct cperf_op_fns *op_fns)
{
struct cperf_latency_ctx *ctx = NULL;
size_t extra_op_priv_size = sizeof(struct priv_op_data);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
ctx = rte_malloc(NULL, sizeof(struct cperf_latency_ctx), 0);
if (ctx == NULL)
goto err;
ctx->dev_id = dev_id;
ctx->qp_id = qp_id;
ctx->populate_ops = op_fns->populate_ops;
ctx->options = options;
ctx->test_vector = test_vector;
/* IV goes at the end of the crypto operation */
uint16_t iv_offset = sizeof(struct rte_crypto_op) +
sizeof(struct rte_crypto_sym_op) +
sizeof(struct cperf_op_result *);
ctx->sess = op_fns->sess_create(sess_mp, dev_id, options, test_vector,
iv_offset);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
if (ctx->sess == NULL)
goto err;
if (cperf_alloc_common_memory(options, test_vector, dev_id, qp_id,
extra_op_priv_size,
&ctx->src_buf_offset, &ctx->dst_buf_offset,
&ctx->pool) < 0)
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
goto err;
ctx->res = rte_malloc(NULL, sizeof(struct cperf_op_result) *
ctx->options->total_ops, 0);
if (ctx->res == NULL)
goto err;
return ctx;
err:
cperf_latency_test_free(ctx);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
return NULL;
}
static inline void
store_timestamp(struct rte_crypto_op *op, uint64_t timestamp)
{
struct priv_op_data *priv_data;
priv_data = (struct priv_op_data *) (op->sym + 1);
priv_data->result->status = op->status;
priv_data->result->tsc_end = timestamp;
}
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
int
cperf_latency_test_runner(void *arg)
{
struct cperf_latency_ctx *ctx = arg;
uint16_t test_burst_size;
uint8_t burst_size_idx = 0;
uint32_t imix_idx = 0;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
static int only_once;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
if (ctx == NULL)
return 0;
struct rte_crypto_op *ops[ctx->options->max_burst_size];
struct rte_crypto_op *ops_processed[ctx->options->max_burst_size];
uint64_t i;
struct priv_op_data *priv_data;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
uint32_t lcore = rte_lcore_id();
#ifdef CPERF_LINEARIZATION_ENABLE
struct rte_cryptodev_info dev_info;
int linearize = 0;
/* Check if source mbufs require coalescing */
if (ctx->options->segment_sz < ctx->options->max_buffer_size) {
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
rte_cryptodev_info_get(ctx->dev_id, &dev_info);
if ((dev_info.feature_flags &
RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER) == 0)
linearize = 1;
}
#endif /* CPERF_LINEARIZATION_ENABLE */
ctx->lcore_id = lcore;
/* Warm up the host CPU before starting the test */
for (i = 0; i < ctx->options->total_ops; i++)
rte_cryptodev_enqueue_burst(ctx->dev_id, ctx->qp_id, NULL, 0);
/* Get first size from range or list */
if (ctx->options->inc_burst_size != 0)
test_burst_size = ctx->options->min_burst_size;
else
test_burst_size = ctx->options->burst_size_list[0];
uint16_t iv_offset = sizeof(struct rte_crypto_op) +
sizeof(struct rte_crypto_sym_op) +
sizeof(struct cperf_op_result *);
while (test_burst_size <= ctx->options->max_burst_size) {
uint64_t ops_enqd = 0, ops_deqd = 0;
uint64_t b_idx = 0;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
uint64_t tsc_val, tsc_end, tsc_start;
uint64_t tsc_max = 0, tsc_min = ~0UL, tsc_tot = 0, tsc_idx = 0;
uint64_t enqd_max = 0, enqd_min = ~0UL, enqd_tot = 0;
uint64_t deqd_max = 0, deqd_min = ~0UL, deqd_tot = 0;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
while (enqd_tot < ctx->options->total_ops) {
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
uint16_t burst_size = ((enqd_tot + test_burst_size)
<= ctx->options->total_ops) ?
test_burst_size :
ctx->options->total_ops -
enqd_tot;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/* Allocate objects containing crypto operations and mbufs */
if (rte_mempool_get_bulk(ctx->pool, (void **)ops,
burst_size) != 0) {
RTE_LOG(ERR, USER1,
"Failed to allocate more crypto operations "
"from the crypto operation pool.\n"
"Consider increasing the pool size "
"with --pool-sz\n");
return -1;
}
/* Setup crypto op, attach mbuf etc */
(ctx->populate_ops)(ops, ctx->src_buf_offset,
ctx->dst_buf_offset,
burst_size, ctx->sess, ctx->options,
ctx->test_vector, iv_offset,
&imix_idx);
tsc_start = rte_rdtsc_precise();
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
#ifdef CPERF_LINEARIZATION_ENABLE
if (linearize) {
/* PMD doesn't support scatter-gather and source buffer
* is segmented.
* We need to linearize it before enqueuing.
*/
for (i = 0; i < burst_size; i++)
rte_pktmbuf_linearize(ops[i]->sym->m_src);
}
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
#endif /* CPERF_LINEARIZATION_ENABLE */
/* Enqueue burst of ops on crypto device */
ops_enqd = rte_cryptodev_enqueue_burst(ctx->dev_id, ctx->qp_id,
ops, burst_size);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/* Dequeue processed burst of ops from crypto device */
ops_deqd = rte_cryptodev_dequeue_burst(ctx->dev_id, ctx->qp_id,
ops_processed, test_burst_size);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
tsc_end = rte_rdtsc_precise();
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/* Free memory for not enqueued operations */
if (ops_enqd != burst_size)
rte_mempool_put_bulk(ctx->pool,
(void **)&ops[ops_enqd],
burst_size - ops_enqd);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
for (i = 0; i < ops_enqd; i++) {
ctx->res[tsc_idx].tsc_start = tsc_start;
/*
* Private data structure starts after the end of the
* rte_crypto_sym_op structure.
*/
priv_data = (struct priv_op_data *) (ops[i]->sym + 1);
priv_data->result = (void *)&ctx->res[tsc_idx];
tsc_idx++;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
if (likely(ops_deqd)) {
/* Free crypto ops so they can be reused. */
for (i = 0; i < ops_deqd; i++)
store_timestamp(ops_processed[i], tsc_end);
rte_mempool_put_bulk(ctx->pool,
(void **)ops_processed, ops_deqd);
deqd_tot += ops_deqd;
deqd_max = max(ops_deqd, deqd_max);
deqd_min = min(ops_deqd, deqd_min);
}
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
enqd_tot += ops_enqd;
enqd_max = max(ops_enqd, enqd_max);
enqd_min = min(ops_enqd, enqd_min);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
b_idx++;
}
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/* Dequeue any operations still in the crypto device */
while (deqd_tot < ctx->options->total_ops) {
/* Sending 0 length burst to flush sw crypto device */
rte_cryptodev_enqueue_burst(ctx->dev_id, ctx->qp_id, NULL, 0);
/* dequeue burst */
ops_deqd = rte_cryptodev_dequeue_burst(ctx->dev_id, ctx->qp_id,
ops_processed, test_burst_size);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
tsc_end = rte_rdtsc_precise();
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
if (ops_deqd != 0) {
for (i = 0; i < ops_deqd; i++)
store_timestamp(ops_processed[i], tsc_end);
rte_mempool_put_bulk(ctx->pool,
(void **)ops_processed, ops_deqd);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
deqd_tot += ops_deqd;
deqd_max = max(ops_deqd, deqd_max);
deqd_min = min(ops_deqd, deqd_min);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
}
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
for (i = 0; i < tsc_idx; i++) {
tsc_val = ctx->res[i].tsc_end - ctx->res[i].tsc_start;
tsc_max = max(tsc_val, tsc_max);
tsc_min = min(tsc_val, tsc_min);
tsc_tot += tsc_val;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
double time_tot, time_avg, time_max, time_min;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
const uint64_t tunit = 1000000; /* us */
const uint64_t tsc_hz = rte_get_tsc_hz();
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
uint64_t enqd_avg = enqd_tot / b_idx;
uint64_t deqd_avg = deqd_tot / b_idx;
uint64_t tsc_avg = tsc_tot / tsc_idx;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
time_tot = tunit*(double)(tsc_tot) / tsc_hz;
time_avg = tunit*(double)(tsc_avg) / tsc_hz;
time_max = tunit*(double)(tsc_max) / tsc_hz;
time_min = tunit*(double)(tsc_min) / tsc_hz;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
if (ctx->options->csv) {
if (!only_once)
printf("\n# lcore, Buffer Size, Burst Size, Pakt Seq #, "
"Packet Size, cycles, time (us)");
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
for (i = 0; i < ctx->options->total_ops; i++) {
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
printf("\n%u;%u;%u;%"PRIu64";%"PRIu64";%.3f",
ctx->lcore_id, ctx->options->test_buffer_size,
test_burst_size, i + 1,
ctx->res[i].tsc_end - ctx->res[i].tsc_start,
tunit * (double) (ctx->res[i].tsc_end
- ctx->res[i].tsc_start)
/ tsc_hz);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
only_once = 1;
} else {
printf("\n# Device %d on lcore %u\n", ctx->dev_id,
ctx->lcore_id);
printf("\n# total operations: %u", ctx->options->total_ops);
printf("\n# Buffer size: %u", ctx->options->test_buffer_size);
printf("\n# Burst size: %u", test_burst_size);
printf("\n# Number of bursts: %"PRIu64,
b_idx);
printf("\n#");
printf("\n# \t Total\t Average\t "
"Maximum\t Minimum");
printf("\n# enqueued\t%12"PRIu64"\t%10"PRIu64"\t"
"%10"PRIu64"\t%10"PRIu64, enqd_tot,
enqd_avg, enqd_max, enqd_min);
printf("\n# dequeued\t%12"PRIu64"\t%10"PRIu64"\t"
"%10"PRIu64"\t%10"PRIu64, deqd_tot,
deqd_avg, deqd_max, deqd_min);
printf("\n# cycles\t%12"PRIu64"\t%10"PRIu64"\t"
"%10"PRIu64"\t%10"PRIu64, tsc_tot,
tsc_avg, tsc_max, tsc_min);
printf("\n# time [us]\t%12.0f\t%10.3f\t%10.3f\t%10.3f",
time_tot, time_avg, time_max, time_min);
printf("\n\n");
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
/* Get next size from range or list */
if (ctx->options->inc_burst_size != 0)
test_burst_size += ctx->options->inc_burst_size;
else {
if (++burst_size_idx == ctx->options->burst_size_count)
break;
test_burst_size =
ctx->options->burst_size_list[burst_size_idx];
}
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
return 0;
}
void
cperf_latency_test_destructor(void *arg)
{
struct cperf_latency_ctx *ctx = arg;
if (ctx == NULL)
return;
cperf_latency_test_free(ctx);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}