numam-dpdk/drivers/net/mlx5/mlx5_ethdev.c

1380 lines
33 KiB
C
Raw Normal View History

/*-
* BSD LICENSE
*
* Copyright 2015 6WIND S.A.
* Copyright 2015 Mellanox.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of 6WIND S.A. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <stddef.h>
#include <assert.h>
#include <unistd.h>
#include <stdint.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <errno.h>
#include <dirent.h>
#include <net/if.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#include <sys/utsname.h>
#include <netinet/in.h>
#include <linux/ethtool.h>
#include <linux/sockios.h>
#include <linux/version.h>
#include <fcntl.h>
#include <rte_atomic.h>
#include <rte_ethdev.h>
#include <rte_mbuf.h>
#include <rte_common.h>
#include <rte_interrupts.h>
#include <rte_alarm.h>
#include <rte_malloc.h>
#include "mlx5.h"
#include "mlx5_rxtx.h"
#include "mlx5_utils.h"
/* Add defines in case the running kernel is not the same as user headers. */
#ifndef ETHTOOL_GLINKSETTINGS
struct ethtool_link_settings {
uint32_t cmd;
uint32_t speed;
uint8_t duplex;
uint8_t port;
uint8_t phy_address;
uint8_t autoneg;
uint8_t mdio_support;
uint8_t eth_to_mdix;
uint8_t eth_tp_mdix_ctrl;
int8_t link_mode_masks_nwords;
uint32_t reserved[8];
uint32_t link_mode_masks[];
};
#define ETHTOOL_GLINKSETTINGS 0x0000004c
#define ETHTOOL_LINK_MODE_1000baseT_Full_BIT 5
#define ETHTOOL_LINK_MODE_Autoneg_BIT 6
#define ETHTOOL_LINK_MODE_1000baseKX_Full_BIT 17
#define ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT 18
#define ETHTOOL_LINK_MODE_10000baseKR_Full_BIT 19
#define ETHTOOL_LINK_MODE_10000baseR_FEC_BIT 20
#define ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT 21
#define ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT 22
#define ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT 23
#define ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT 24
#define ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT 25
#define ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT 26
#define ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT 27
#define ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT 28
#define ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT 29
#define ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT 30
#endif
#ifndef HAVE_ETHTOOL_LINK_MODE_25G
#define ETHTOOL_LINK_MODE_25000baseCR_Full_BIT 31
#define ETHTOOL_LINK_MODE_25000baseKR_Full_BIT 32
#define ETHTOOL_LINK_MODE_25000baseSR_Full_BIT 33
#endif
#ifndef HAVE_ETHTOOL_LINK_MODE_50G
#define ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT 34
#define ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT 35
#endif
#ifndef HAVE_ETHTOOL_LINK_MODE_100G
#define ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT 36
#define ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT 37
#define ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT 38
#define ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT 39
#endif
#define ETHTOOL_LINK_MODE_MASK_MAX_KERNEL_NU32 (SCHAR_MAX)
/**
* Return private structure associated with an Ethernet device.
*
* @param dev
* Pointer to Ethernet device structure.
*
* @return
* Pointer to private structure.
*/
struct priv *
mlx5_get_priv(struct rte_eth_dev *dev)
{
return dev->data->dev_private;
}
/**
* Check if running as a secondary process.
*
* @return
* Nonzero if running as a secondary process.
*/
inline int
mlx5_is_secondary(void)
{
return rte_eal_process_type() == RTE_PROC_SECONDARY;
}
/**
* Get interface name from private structure.
*
* @param[in] priv
* Pointer to private structure.
* @param[out] ifname
* Interface name output buffer.
*
* @return
* 0 on success, -1 on failure and errno is set.
*/
int
priv_get_ifname(const struct priv *priv, char (*ifname)[IF_NAMESIZE])
{
DIR *dir;
struct dirent *dent;
unsigned int dev_type = 0;
unsigned int dev_port_prev = ~0u;
char match[IF_NAMESIZE] = "";
{
MKSTR(path, "%s/device/net", priv->ctx->device->ibdev_path);
dir = opendir(path);
if (dir == NULL)
return -1;
}
while ((dent = readdir(dir)) != NULL) {
char *name = dent->d_name;
FILE *file;
unsigned int dev_port;
int r;
if ((name[0] == '.') &&
((name[1] == '\0') ||
((name[1] == '.') && (name[2] == '\0'))))
continue;
MKSTR(path, "%s/device/net/%s/%s",
priv->ctx->device->ibdev_path, name,
(dev_type ? "dev_id" : "dev_port"));
file = fopen(path, "rb");
if (file == NULL) {
if (errno != ENOENT)
continue;
/*
* Switch to dev_id when dev_port does not exist as
* is the case with Linux kernel versions < 3.15.
*/
try_dev_id:
match[0] = '\0';
if (dev_type)
break;
dev_type = 1;
dev_port_prev = ~0u;
rewinddir(dir);
continue;
}
r = fscanf(file, (dev_type ? "%x" : "%u"), &dev_port);
fclose(file);
if (r != 1)
continue;
/*
* Switch to dev_id when dev_port returns the same value for
* all ports. May happen when using a MOFED release older than
* 3.0 with a Linux kernel >= 3.15.
*/
if (dev_port == dev_port_prev)
goto try_dev_id;
dev_port_prev = dev_port;
if (dev_port == (priv->port - 1u))
snprintf(match, sizeof(match), "%s", name);
}
closedir(dir);
if (match[0] == '\0')
return -1;
strncpy(*ifname, match, sizeof(*ifname));
return 0;
}
/**
* Check if the counter is located on ib counters file.
*
* @param[in] cntr
* Counter name.
*
* @return
* 1 if counter is located on ib counters file , 0 otherwise.
*/
int
priv_is_ib_cntr(const char *cntr)
{
if (!strcmp(cntr, "out_of_buffer"))
return 1;
return 0;
}
/**
* Read from sysfs entry.
*
* @param[in] priv
* Pointer to private structure.
* @param[in] entry
* Entry name relative to sysfs path.
* @param[out] buf
* Data output buffer.
* @param size
* Buffer size.
*
* @return
* 0 on success, -1 on failure and errno is set.
*/
static int
priv_sysfs_read(const struct priv *priv, const char *entry,
char *buf, size_t size)
{
char ifname[IF_NAMESIZE];
FILE *file;
int ret;
int err;
if (priv_get_ifname(priv, &ifname))
return -1;
if (priv_is_ib_cntr(entry)) {
MKSTR(path, "%s/ports/1/hw_counters/%s",
priv->ctx->device->ibdev_path, entry);
file = fopen(path, "rb");
} else {
MKSTR(path, "%s/device/net/%s/%s",
priv->ctx->device->ibdev_path, ifname, entry);
file = fopen(path, "rb");
}
if (file == NULL)
return -1;
ret = fread(buf, 1, size, file);
err = errno;
if (((size_t)ret < size) && (ferror(file)))
ret = -1;
else
ret = size;
fclose(file);
errno = err;
return ret;
}
/**
* Write to sysfs entry.
*
* @param[in] priv
* Pointer to private structure.
* @param[in] entry
* Entry name relative to sysfs path.
* @param[in] buf
* Data buffer.
* @param size
* Buffer size.
*
* @return
* 0 on success, -1 on failure and errno is set.
*/
static int
priv_sysfs_write(const struct priv *priv, const char *entry,
char *buf, size_t size)
{
char ifname[IF_NAMESIZE];
FILE *file;
int ret;
int err;
if (priv_get_ifname(priv, &ifname))
return -1;
MKSTR(path, "%s/device/net/%s/%s", priv->ctx->device->ibdev_path,
ifname, entry);
file = fopen(path, "wb");
if (file == NULL)
return -1;
ret = fwrite(buf, 1, size, file);
err = errno;
if (((size_t)ret < size) || (ferror(file)))
ret = -1;
else
ret = size;
fclose(file);
errno = err;
return ret;
}
/**
* Get unsigned long sysfs property.
*
* @param priv
* Pointer to private structure.
* @param[in] name
* Entry name relative to sysfs path.
* @param[out] value
* Value output buffer.
*
* @return
* 0 on success, -1 on failure and errno is set.
*/
static int
priv_get_sysfs_ulong(struct priv *priv, const char *name, unsigned long *value)
{
int ret;
unsigned long value_ret;
char value_str[32];
ret = priv_sysfs_read(priv, name, value_str, (sizeof(value_str) - 1));
if (ret == -1) {
DEBUG("cannot read %s value from sysfs: %s",
name, strerror(errno));
return -1;
}
value_str[ret] = '\0';
errno = 0;
value_ret = strtoul(value_str, NULL, 0);
if (errno) {
DEBUG("invalid %s value `%s': %s", name, value_str,
strerror(errno));
return -1;
}
*value = value_ret;
return 0;
}
/**
* Set unsigned long sysfs property.
*
* @param priv
* Pointer to private structure.
* @param[in] name
* Entry name relative to sysfs path.
* @param value
* Value to set.
*
* @return
* 0 on success, -1 on failure and errno is set.
*/
static int
priv_set_sysfs_ulong(struct priv *priv, const char *name, unsigned long value)
{
int ret;
MKSTR(value_str, "%lu", value);
ret = priv_sysfs_write(priv, name, value_str, (sizeof(value_str) - 1));
if (ret == -1) {
DEBUG("cannot write %s `%s' (%lu) to sysfs: %s",
name, value_str, value, strerror(errno));
return -1;
}
return 0;
}
/**
* Perform ifreq ioctl() on associated Ethernet device.
*
* @param[in] priv
* Pointer to private structure.
* @param req
* Request number to pass to ioctl().
* @param[out] ifr
* Interface request structure output buffer.
*
* @return
* 0 on success, -1 on failure and errno is set.
*/
int
priv_ifreq(const struct priv *priv, int req, struct ifreq *ifr)
{
int sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
int ret = -1;
if (sock == -1)
return ret;
if (priv_get_ifname(priv, &ifr->ifr_name) == 0)
ret = ioctl(sock, req, ifr);
close(sock);
return ret;
}
/**
* Return the number of active VFs for the current device.
*
* @param[in] priv
* Pointer to private structure.
* @param[out] num_vfs
* Number of active VFs.
*
* @return
* 0 on success, -1 on failure and errno is set.
*/
int
priv_get_num_vfs(struct priv *priv, uint16_t *num_vfs)
{
/* The sysfs entry name depends on the operating system. */
const char **name = (const char *[]){
"device/sriov_numvfs",
"device/mlx5_num_vfs",
NULL,
};
int ret;
do {
unsigned long ulong_num_vfs;
ret = priv_get_sysfs_ulong(priv, *name, &ulong_num_vfs);
if (!ret)
*num_vfs = ulong_num_vfs;
} while (*(++name) && ret);
return ret;
}
/**
* Get device MTU.
*
* @param priv
* Pointer to private structure.
* @param[out] mtu
* MTU value output buffer.
*
* @return
* 0 on success, -1 on failure and errno is set.
*/
int
priv_get_mtu(struct priv *priv, uint16_t *mtu)
{
unsigned long ulong_mtu;
if (priv_get_sysfs_ulong(priv, "mtu", &ulong_mtu) == -1)
return -1;
*mtu = ulong_mtu;
return 0;
}
/**
* Read device counter from sysfs.
*
* @param priv
* Pointer to private structure.
* @param name
* Counter name.
* @param[out] cntr
* Counter output buffer.
*
* @return
* 0 on success, -1 on failure and errno is set.
*/
int
priv_get_cntr_sysfs(struct priv *priv, const char *name, uint64_t *cntr)
{
unsigned long ulong_ctr;
if (priv_get_sysfs_ulong(priv, name, &ulong_ctr) == -1)
return -1;
*cntr = ulong_ctr;
return 0;
}
/**
* Set device MTU.
*
* @param priv
* Pointer to private structure.
* @param mtu
* MTU value to set.
*
* @return
* 0 on success, -1 on failure and errno is set.
*/
static int
priv_set_mtu(struct priv *priv, uint16_t mtu)
{
uint16_t new_mtu;
if (priv_set_sysfs_ulong(priv, "mtu", mtu) ||
priv_get_mtu(priv, &new_mtu))
return -1;
if (new_mtu == mtu)
return 0;
errno = EINVAL;
return -1;
}
/**
* Set device flags.
*
* @param priv
* Pointer to private structure.
* @param keep
* Bitmask for flags that must remain untouched.
* @param flags
* Bitmask for flags to modify.
*
* @return
* 0 on success, -1 on failure and errno is set.
*/
int
priv_set_flags(struct priv *priv, unsigned int keep, unsigned int flags)
{
unsigned long tmp;
if (priv_get_sysfs_ulong(priv, "flags", &tmp) == -1)
return -1;
tmp &= keep;
tmp |= (flags & (~keep));
return priv_set_sysfs_ulong(priv, "flags", tmp);
}
/**
* Ethernet device configuration.
*
* Prepare the driver for a given number of TX and RX queues.
*
* @param dev
* Pointer to Ethernet device structure.
*
* @return
* 0 on success, errno value on failure.
*/
static int
dev_configure(struct rte_eth_dev *dev)
{
struct priv *priv = dev->data->dev_private;
unsigned int rxqs_n = dev->data->nb_rx_queues;
unsigned int txqs_n = dev->data->nb_tx_queues;
unsigned int i;
unsigned int j;
unsigned int reta_idx_n;
priv->rss_hf = dev->data->dev_conf.rx_adv_conf.rss_conf.rss_hf;
priv->rxqs = (void *)dev->data->rx_queues;
priv->txqs = (void *)dev->data->tx_queues;
if (txqs_n != priv->txqs_n) {
INFO("%p: TX queues number update: %u -> %u",
(void *)dev, priv->txqs_n, txqs_n);
priv->txqs_n = txqs_n;
}
if (rxqs_n > priv->ind_table_max_size) {
ERROR("cannot handle this many RX queues (%u)", rxqs_n);
return EINVAL;
}
if (rxqs_n == priv->rxqs_n)
return 0;
INFO("%p: RX queues number update: %u -> %u",
(void *)dev, priv->rxqs_n, rxqs_n);
priv->rxqs_n = rxqs_n;
/* If the requested number of RX queues is not a power of two, use the
* maximum indirection table size for better balancing.
* The result is always rounded to the next power of two. */
reta_idx_n = (1 << log2above((rxqs_n & (rxqs_n - 1)) ?
priv->ind_table_max_size :
rxqs_n));
if (priv_rss_reta_index_resize(priv, reta_idx_n))
return ENOMEM;
/* When the number of RX queues is not a power of two, the remaining
* table entries are padded with reused WQs and hashes are not spread
* uniformly. */
for (i = 0, j = 0; (i != reta_idx_n); ++i) {
(*priv->reta_idx)[i] = j;
if (++j == rxqs_n)
j = 0;
}
mlx5: refactor Rx code for the new verbs RSS API The new Verbs RSS API is lower-level than the previous one and much more flexible but requires RX queues to use Work Queues (WQs) internally instead of Queue Pairs (QPs), which are grouped in an indirection table used by a new kind of hash RX QPs. Hash RX QPs and the indirection table together replace the parent RSS QP while WQs are mostly similar to child QPs. RSS hash key is not configurable yet. Summary of changes: - Individual DPDK RX queues do not store flow properties anymore, this info is now part of the hash RX queues. - All functions affecting the parent queue when RSS is enabled or the basic queues otherwise are modified to affect hash RX queues instead. - Hash RX queues are also used when a single DPDK RX queue is configured (no RSS) to remove that special case. - Hash RX queues and indirection table are created/destroyed when device is started/stopped in addition to create/destroy flows. - Contrary to QPs, WQs are moved to the "ready" state before posting RX buffers, otherwise they are ignored. - Resource domain information is added to WQs for better performance. - CQs are not resized anymore when switching between non-SG and SG modes as it does not work correctly with WQs. Use the largest possible size instead, since CQ size does not have to be the same as the number of elements in the RX queue. This also applies to the maximum number of outstanding WRs in a WQ (max_recv_wr). Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com> Signed-off-by: Olga Shern <olgas@mellanox.com> Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Signed-off-by: Or Ami <ora@mellanox.com> Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
2015-10-30 18:55:06 +00:00
return 0;
}
/**
* DPDK callback for Ethernet device configuration.
*
* @param dev
* Pointer to Ethernet device structure.
*
* @return
* 0 on success, negative errno value on failure.
*/
int
mlx5_dev_configure(struct rte_eth_dev *dev)
{
struct priv *priv = dev->data->dev_private;
int ret;
if (mlx5_is_secondary())
return -E_RTE_SECONDARY;
priv_lock(priv);
ret = dev_configure(dev);
assert(ret >= 0);
priv_unlock(priv);
return -ret;
}
/**
* DPDK callback to get information about the device.
*
* @param dev
* Pointer to Ethernet device structure.
* @param[out] info
* Info structure output buffer.
*/
void
mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
{
struct priv *priv = mlx5_get_priv(dev);
unsigned int max;
char ifname[IF_NAMESIZE];
info->pci_dev = RTE_ETH_DEV_TO_PCI(dev);
priv_lock(priv);
/* FIXME: we should ask the device for these values. */
info->min_rx_bufsize = 32;
info->max_rx_pktlen = 65536;
/*
* Since we need one CQ per QP, the limit is the minimum number
* between the two values.
*/
max = ((priv->device_attr.max_cq > priv->device_attr.max_qp) ?
priv->device_attr.max_qp : priv->device_attr.max_cq);
/* If max >= 65535 then max = 0, max_rx_queues is uint16_t. */
if (max >= 65535)
max = 65535;
info->max_rx_queues = max;
info->max_tx_queues = max;
info->max_mac_addrs = RTE_DIM(priv->mac);
info->rx_offload_capa =
(priv->hw_csum ?
(DEV_RX_OFFLOAD_IPV4_CKSUM |
DEV_RX_OFFLOAD_UDP_CKSUM |
DEV_RX_OFFLOAD_TCP_CKSUM) :
0) |
(priv->hw_vlan_strip ? DEV_RX_OFFLOAD_VLAN_STRIP : 0);
if (!priv->mps)
info->tx_offload_capa = DEV_TX_OFFLOAD_VLAN_INSERT;
if (priv->hw_csum)
info->tx_offload_capa |=
(DEV_TX_OFFLOAD_IPV4_CKSUM |
DEV_TX_OFFLOAD_UDP_CKSUM |
DEV_TX_OFFLOAD_TCP_CKSUM);
if (priv->tso)
info->tx_offload_capa |= DEV_TX_OFFLOAD_TCP_TSO;
if (priv->tunnel_en)
info->tx_offload_capa |= (DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM |
DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
DEV_TX_OFFLOAD_GRE_TNL_TSO);
if (priv_get_ifname(priv, &ifname) == 0)
info->if_index = if_nametoindex(ifname);
info->reta_size = priv->reta_idx_n ?
priv->reta_idx_n : priv->ind_table_max_size;
info->hash_key_size = ((*priv->rss_conf) ?
(*priv->rss_conf)[0]->rss_key_len :
0);
info->speed_capa = priv->link_speed_capa;
priv_unlock(priv);
}
const uint32_t *
mlx5_dev_supported_ptypes_get(struct rte_eth_dev *dev)
{
static const uint32_t ptypes[] = {
/* refers to rxq_cq_to_pkt_type() */
RTE_PTYPE_L2_ETHER,
RTE_PTYPE_L3_IPV4_EXT_UNKNOWN,
RTE_PTYPE_L3_IPV6_EXT_UNKNOWN,
RTE_PTYPE_L4_NONFRAG,
RTE_PTYPE_L4_FRAG,
RTE_PTYPE_L4_TCP,
RTE_PTYPE_L4_UDP,
RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN,
RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN,
RTE_PTYPE_INNER_L4_NONFRAG,
RTE_PTYPE_INNER_L4_FRAG,
RTE_PTYPE_INNER_L4_TCP,
RTE_PTYPE_INNER_L4_UDP,
RTE_PTYPE_UNKNOWN
};
if (dev->rx_pkt_burst == mlx5_rx_burst ||
dev->rx_pkt_burst == mlx5_rx_burst_vec)
return ptypes;
return NULL;
}
/**
* DPDK callback to retrieve physical link information.
*
* @param dev
* Pointer to Ethernet device structure.
* @param wait_to_complete
* Wait for request completion (ignored).
*/
static int
mlx5_link_update_unlocked_gset(struct rte_eth_dev *dev, int wait_to_complete)
{
struct priv *priv = mlx5_get_priv(dev);
struct ethtool_cmd edata = {
.cmd = ETHTOOL_GSET /* Deprecated since Linux v4.5. */
};
struct ifreq ifr;
struct rte_eth_link dev_link;
int link_speed = 0;
/* priv_lock() is not taken to allow concurrent calls. */
(void)wait_to_complete;
if (priv_ifreq(priv, SIOCGIFFLAGS, &ifr)) {
WARN("ioctl(SIOCGIFFLAGS) failed: %s", strerror(errno));
return -1;
}
memset(&dev_link, 0, sizeof(dev_link));
dev_link.link_status = ((ifr.ifr_flags & IFF_UP) &&
(ifr.ifr_flags & IFF_RUNNING));
ifr.ifr_data = (void *)&edata;
if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
WARN("ioctl(SIOCETHTOOL, ETHTOOL_GSET) failed: %s",
strerror(errno));
return -1;
}
link_speed = ethtool_cmd_speed(&edata);
if (link_speed == -1)
dev_link.link_speed = 0;
else
dev_link.link_speed = link_speed;
priv->link_speed_capa = 0;
if (edata.supported & SUPPORTED_Autoneg)
priv->link_speed_capa |= ETH_LINK_SPEED_AUTONEG;
if (edata.supported & (SUPPORTED_1000baseT_Full |
SUPPORTED_1000baseKX_Full))
priv->link_speed_capa |= ETH_LINK_SPEED_1G;
if (edata.supported & SUPPORTED_10000baseKR_Full)
priv->link_speed_capa |= ETH_LINK_SPEED_10G;
if (edata.supported & (SUPPORTED_40000baseKR4_Full |
SUPPORTED_40000baseCR4_Full |
SUPPORTED_40000baseSR4_Full |
SUPPORTED_40000baseLR4_Full))
priv->link_speed_capa |= ETH_LINK_SPEED_40G;
dev_link.link_duplex = ((edata.duplex == DUPLEX_HALF) ?
ETH_LINK_HALF_DUPLEX : ETH_LINK_FULL_DUPLEX);
dev_link.link_autoneg = !(dev->data->dev_conf.link_speeds &
ETH_LINK_SPEED_FIXED);
if (memcmp(&dev_link, &dev->data->dev_link, sizeof(dev_link))) {
/* Link status changed. */
dev->data->dev_link = dev_link;
return 0;
}
/* Link status is still the same. */
return -1;
}
/**
* Retrieve physical link information (unlocked version using new ioctl).
*
* @param dev
* Pointer to Ethernet device structure.
* @param wait_to_complete
* Wait for request completion (ignored).
*/
static int
mlx5_link_update_unlocked_gs(struct rte_eth_dev *dev, int wait_to_complete)
{
struct priv *priv = mlx5_get_priv(dev);
__extension__ struct {
struct ethtool_link_settings edata;
uint32_t link_mode_data[3 *
ETHTOOL_LINK_MODE_MASK_MAX_KERNEL_NU32];
} ecmd;
struct ifreq ifr;
struct rte_eth_link dev_link;
uint64_t sc;
(void)wait_to_complete;
if (priv_ifreq(priv, SIOCGIFFLAGS, &ifr)) {
WARN("ioctl(SIOCGIFFLAGS) failed: %s", strerror(errno));
return -1;
}
memset(&dev_link, 0, sizeof(dev_link));
dev_link.link_status = ((ifr.ifr_flags & IFF_UP) &&
(ifr.ifr_flags & IFF_RUNNING));
memset(&ecmd, 0, sizeof(ecmd));
ecmd.edata.cmd = ETHTOOL_GLINKSETTINGS;
ifr.ifr_data = (void *)&ecmd;
if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
DEBUG("ioctl(SIOCETHTOOL, ETHTOOL_GLINKSETTINGS) failed: %s",
strerror(errno));
return -1;
}
ecmd.edata.link_mode_masks_nwords = -ecmd.edata.link_mode_masks_nwords;
if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
DEBUG("ioctl(SIOCETHTOOL, ETHTOOL_GLINKSETTINGS) failed: %s",
strerror(errno));
return -1;
}
dev_link.link_speed = ecmd.edata.speed;
sc = ecmd.edata.link_mode_masks[0] |
((uint64_t)ecmd.edata.link_mode_masks[1] << 32);
priv->link_speed_capa = 0;
if (sc & ETHTOOL_LINK_MODE_Autoneg_BIT)
priv->link_speed_capa |= ETH_LINK_SPEED_AUTONEG;
if (sc & (ETHTOOL_LINK_MODE_1000baseT_Full_BIT |
ETHTOOL_LINK_MODE_1000baseKX_Full_BIT))
priv->link_speed_capa |= ETH_LINK_SPEED_1G;
if (sc & (ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT |
ETHTOOL_LINK_MODE_10000baseKR_Full_BIT |
ETHTOOL_LINK_MODE_10000baseR_FEC_BIT))
priv->link_speed_capa |= ETH_LINK_SPEED_10G;
if (sc & (ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT |
ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT))
priv->link_speed_capa |= ETH_LINK_SPEED_20G;
if (sc & (ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT |
ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT |
ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT |
ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT))
priv->link_speed_capa |= ETH_LINK_SPEED_40G;
if (sc & (ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT |
ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT |
ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT |
ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT))
priv->link_speed_capa |= ETH_LINK_SPEED_56G;
if (sc & (ETHTOOL_LINK_MODE_25000baseCR_Full_BIT |
ETHTOOL_LINK_MODE_25000baseKR_Full_BIT |
ETHTOOL_LINK_MODE_25000baseSR_Full_BIT))
priv->link_speed_capa |= ETH_LINK_SPEED_25G;
if (sc & (ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT |
ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT))
priv->link_speed_capa |= ETH_LINK_SPEED_50G;
if (sc & (ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT |
ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT |
ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT |
ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT))
priv->link_speed_capa |= ETH_LINK_SPEED_100G;
dev_link.link_duplex = ((ecmd.edata.duplex == DUPLEX_HALF) ?
ETH_LINK_HALF_DUPLEX : ETH_LINK_FULL_DUPLEX);
dev_link.link_autoneg = !(dev->data->dev_conf.link_speeds &
ETH_LINK_SPEED_FIXED);
if (memcmp(&dev_link, &dev->data->dev_link, sizeof(dev_link))) {
/* Link status changed. */
dev->data->dev_link = dev_link;
return 0;
}
/* Link status is still the same. */
return -1;
}
/**
* DPDK callback to retrieve physical link information.
*
* @param dev
* Pointer to Ethernet device structure.
* @param wait_to_complete
* Wait for request completion (ignored).
*/
int
mlx5_link_update(struct rte_eth_dev *dev, int wait_to_complete)
{
struct utsname utsname;
int ver[3];
if (uname(&utsname) == -1 ||
sscanf(utsname.release, "%d.%d.%d",
&ver[0], &ver[1], &ver[2]) != 3 ||
KERNEL_VERSION(ver[0], ver[1], ver[2]) < KERNEL_VERSION(4, 9, 0))
return mlx5_link_update_unlocked_gset(dev, wait_to_complete);
return mlx5_link_update_unlocked_gs(dev, wait_to_complete);
}
/**
* DPDK callback to change the MTU.
*
* @param dev
* Pointer to Ethernet device structure.
* @param in_mtu
* New MTU.
*
* @return
* 0 on success, negative errno value on failure.
*/
int
mlx5_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
{
struct priv *priv = dev->data->dev_private;
uint16_t kern_mtu;
int ret = 0;
if (mlx5_is_secondary())
return -E_RTE_SECONDARY;
priv_lock(priv);
ret = priv_get_mtu(priv, &kern_mtu);
if (ret)
goto out;
/* Set kernel interface MTU first. */
ret = priv_set_mtu(priv, mtu);
if (ret)
goto out;
ret = priv_get_mtu(priv, &kern_mtu);
if (ret)
goto out;
if (kern_mtu == mtu) {
priv->mtu = mtu;
DEBUG("adapter port %u MTU set to %u", priv->port, mtu);
}
priv_unlock(priv);
return 0;
out:
ret = errno;
WARN("cannot set port %u MTU to %u: %s", priv->port, mtu,
strerror(ret));
priv_unlock(priv);
assert(ret >= 0);
return -ret;
}
/**
* DPDK callback to get flow control status.
*
* @param dev
* Pointer to Ethernet device structure.
* @param[out] fc_conf
* Flow control output buffer.
*
* @return
* 0 on success, negative errno value on failure.
*/
int
mlx5_dev_get_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
{
struct priv *priv = dev->data->dev_private;
struct ifreq ifr;
struct ethtool_pauseparam ethpause = {
.cmd = ETHTOOL_GPAUSEPARAM
};
int ret;
if (mlx5_is_secondary())
return -E_RTE_SECONDARY;
ifr.ifr_data = (void *)&ethpause;
priv_lock(priv);
if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
ret = errno;
WARN("ioctl(SIOCETHTOOL, ETHTOOL_GPAUSEPARAM)"
" failed: %s",
strerror(ret));
goto out;
}
fc_conf->autoneg = ethpause.autoneg;
if (ethpause.rx_pause && ethpause.tx_pause)
fc_conf->mode = RTE_FC_FULL;
else if (ethpause.rx_pause)
fc_conf->mode = RTE_FC_RX_PAUSE;
else if (ethpause.tx_pause)
fc_conf->mode = RTE_FC_TX_PAUSE;
else
fc_conf->mode = RTE_FC_NONE;
ret = 0;
out:
priv_unlock(priv);
assert(ret >= 0);
return -ret;
}
/**
* DPDK callback to modify flow control parameters.
*
* @param dev
* Pointer to Ethernet device structure.
* @param[in] fc_conf
* Flow control parameters.
*
* @return
* 0 on success, negative errno value on failure.
*/
int
mlx5_dev_set_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
{
struct priv *priv = dev->data->dev_private;
struct ifreq ifr;
struct ethtool_pauseparam ethpause = {
.cmd = ETHTOOL_SPAUSEPARAM
};
int ret;
if (mlx5_is_secondary())
return -E_RTE_SECONDARY;
ifr.ifr_data = (void *)&ethpause;
ethpause.autoneg = fc_conf->autoneg;
if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
(fc_conf->mode & RTE_FC_RX_PAUSE))
ethpause.rx_pause = 1;
else
ethpause.rx_pause = 0;
if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
(fc_conf->mode & RTE_FC_TX_PAUSE))
ethpause.tx_pause = 1;
else
ethpause.tx_pause = 0;
priv_lock(priv);
if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
ret = errno;
WARN("ioctl(SIOCETHTOOL, ETHTOOL_SPAUSEPARAM)"
" failed: %s",
strerror(ret));
goto out;
}
ret = 0;
out:
priv_unlock(priv);
assert(ret >= 0);
return -ret;
}
/**
* Get PCI information from struct ibv_device.
*
* @param device
* Pointer to Ethernet device structure.
* @param[out] pci_addr
* PCI bus address output buffer.
*
* @return
* 0 on success, -1 on failure and errno is set.
*/
int
mlx5_ibv_device_to_pci_addr(const struct ibv_device *device,
struct rte_pci_addr *pci_addr)
{
FILE *file;
char line[32];
MKSTR(path, "%s/device/uevent", device->ibdev_path);
file = fopen(path, "rb");
if (file == NULL)
return -1;
while (fgets(line, sizeof(line), file) == line) {
size_t len = strlen(line);
int ret;
/* Truncate long lines. */
if (len == (sizeof(line) - 1))
while (line[(len - 1)] != '\n') {
ret = fgetc(file);
if (ret == EOF)
break;
line[(len - 1)] = ret;
}
/* Extract information. */
if (sscanf(line,
"PCI_SLOT_NAME="
"%" SCNx32 ":%" SCNx8 ":%" SCNx8 ".%" SCNx8 "\n",
&pci_addr->domain,
&pci_addr->bus,
&pci_addr->devid,
&pci_addr->function) == 4) {
ret = 0;
break;
}
}
fclose(file);
return 0;
}
/**
* Link status handler.
*
* @param priv
* Pointer to private structure.
* @param dev
* Pointer to the rte_eth_dev structure.
*
* @return
* Nonzero if the callback process can be called immediately.
*/
static int
priv_dev_link_status_handler(struct priv *priv, struct rte_eth_dev *dev)
{
struct ibv_async_event event;
struct rte_eth_link *link = &dev->data->dev_link;
int ret = 0;
/* Read all message and acknowledge them. */
for (;;) {
if (ibv_get_async_event(priv->ctx, &event))
break;
if (event.event_type != IBV_EVENT_PORT_ACTIVE &&
event.event_type != IBV_EVENT_PORT_ERR)
DEBUG("event type %d on port %d not handled",
event.event_type, event.element.port_num);
ibv_ack_async_event(&event);
}
mlx5_link_update(dev, 0);
if (((link->link_speed == 0) && link->link_status) ||
((link->link_speed != 0) && !link->link_status)) {
if (!priv->pending_alarm) {
/* Inconsistent status, check again later. */
priv->pending_alarm = 1;
rte_eal_alarm_set(MLX5_ALARM_TIMEOUT_US,
mlx5_dev_link_status_handler,
dev);
}
} else {
ret = 1;
}
return ret;
}
/**
* Handle delayed link status event.
*
* @param arg
* Registered argument.
*/
void
mlx5_dev_link_status_handler(void *arg)
{
struct rte_eth_dev *dev = arg;
struct priv *priv = dev->data->dev_private;
int ret;
priv_lock(priv);
assert(priv->pending_alarm == 1);
priv->pending_alarm = 0;
ret = priv_dev_link_status_handler(priv, dev);
priv_unlock(priv);
if (ret)
_rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL,
NULL);
}
/**
* Handle interrupts from the NIC.
*
* @param[in] intr_handle
* Interrupt handler.
* @param cb_arg
* Callback argument.
*/
void
mlx5_dev_interrupt_handler(void *cb_arg)
{
struct rte_eth_dev *dev = cb_arg;
struct priv *priv = dev->data->dev_private;
int ret;
priv_lock(priv);
ret = priv_dev_link_status_handler(priv, dev);
priv_unlock(priv);
if (ret)
_rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL,
NULL);
}
/**
* Uninstall interrupt handler.
*
* @param priv
* Pointer to private structure.
* @param dev
* Pointer to the rte_eth_dev structure.
*/
void
priv_dev_interrupt_handler_uninstall(struct priv *priv, struct rte_eth_dev *dev)
{
if (!dev->data->dev_conf.intr_conf.lsc)
return;
rte_intr_callback_unregister(&priv->intr_handle,
mlx5_dev_interrupt_handler,
dev);
if (priv->pending_alarm)
rte_eal_alarm_cancel(mlx5_dev_link_status_handler, dev);
priv->pending_alarm = 0;
priv->intr_handle.fd = 0;
priv->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN;
}
/**
* Install interrupt handler.
*
* @param priv
* Pointer to private structure.
* @param dev
* Pointer to the rte_eth_dev structure.
*/
void
priv_dev_interrupt_handler_install(struct priv *priv, struct rte_eth_dev *dev)
{
int rc, flags;
if (!dev->data->dev_conf.intr_conf.lsc)
return;
assert(priv->ctx->async_fd > 0);
flags = fcntl(priv->ctx->async_fd, F_GETFL);
rc = fcntl(priv->ctx->async_fd, F_SETFL, flags | O_NONBLOCK);
if (rc < 0) {
INFO("failed to change file descriptor async event queue");
dev->data->dev_conf.intr_conf.lsc = 0;
} else {
priv->intr_handle.fd = priv->ctx->async_fd;
priv->intr_handle.type = RTE_INTR_HANDLE_EXT;
rte_intr_callback_register(&priv->intr_handle,
mlx5_dev_interrupt_handler,
dev);
}
}
/**
* Change the link state (UP / DOWN).
*
* @param priv
* Pointer to Ethernet device structure.
* @param up
* Nonzero for link up, otherwise link down.
*
* @return
* 0 on success, errno value on failure.
*/
static int
priv_set_link(struct priv *priv, int up)
{
struct rte_eth_dev *dev = priv->dev;
int err;
if (up) {
err = priv_set_flags(priv, ~IFF_UP, IFF_UP);
if (err)
return err;
priv_select_tx_function(priv);
priv_select_rx_function(priv);
} else {
err = priv_set_flags(priv, ~IFF_UP, ~IFF_UP);
if (err)
return err;
dev->rx_pkt_burst = removed_rx_burst;
dev->tx_pkt_burst = removed_tx_burst;
}
return 0;
}
/**
* DPDK callback to bring the link DOWN.
*
* @param dev
* Pointer to Ethernet device structure.
*
* @return
* 0 on success, errno value on failure.
*/
int
mlx5_set_link_down(struct rte_eth_dev *dev)
{
struct priv *priv = dev->data->dev_private;
int err;
priv_lock(priv);
err = priv_set_link(priv, 0);
priv_unlock(priv);
return err;
}
/**
* DPDK callback to bring the link UP.
*
* @param dev
* Pointer to Ethernet device structure.
*
* @return
* 0 on success, errno value on failure.
*/
int
mlx5_set_link_up(struct rte_eth_dev *dev)
{
struct priv *priv = dev->data->dev_private;
int err;
priv_lock(priv);
err = priv_set_link(priv, 1);
priv_unlock(priv);
return err;
}
/**
* Configure the TX function to use.
*
* @param priv
* Pointer to private structure.
*/
void
priv_select_tx_function(struct priv *priv)
{
priv->dev->tx_pkt_burst = mlx5_tx_burst;
/* Select appropriate TX function. */
if (priv->mps == MLX5_MPW_ENHANCED) {
if (priv_check_vec_tx_support(priv) > 0) {
if (priv_check_raw_vec_tx_support(priv) > 0)
priv->dev->tx_pkt_burst = mlx5_tx_burst_raw_vec;
else
priv->dev->tx_pkt_burst = mlx5_tx_burst_vec;
DEBUG("selected Enhanced MPW TX vectorized function");
} else {
priv->dev->tx_pkt_burst = mlx5_tx_burst_empw;
DEBUG("selected Enhanced MPW TX function");
}
} else if (priv->mps && priv->txq_inline) {
priv->dev->tx_pkt_burst = mlx5_tx_burst_mpw_inline;
DEBUG("selected MPW inline TX function");
} else if (priv->mps) {
priv->dev->tx_pkt_burst = mlx5_tx_burst_mpw;
DEBUG("selected MPW TX function");
}
}
/**
* Configure the RX function to use.
*
* @param priv
* Pointer to private structure.
*/
void
priv_select_rx_function(struct priv *priv)
{
if (priv_check_vec_rx_support(priv) > 0) {
priv->dev->rx_pkt_burst = mlx5_rx_burst_vec;
DEBUG("selected RX vectorized function");
} else {
priv->dev->rx_pkt_burst = mlx5_rx_burst;
}
}