numam-dpdk/drivers/net/i40e/rte_pmd_i40e.h

336 lines
9.1 KiB
C
Raw Normal View History

/*-
* BSD LICENSE
*
* Copyright (c) 2017 Intel Corporation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _PMD_I40E_H_
#define _PMD_I40E_H_
/**
* @file rte_pmd_i40e.h
*
* i40e PMD specific functions.
*
* @b EXPERIMENTAL: this API may change, or be removed, without prior notice
*
*/
#include <rte_ethdev.h>
/**
* Response sent back to i40e driver from user app after callback
*/
enum rte_pmd_i40e_mb_event_rsp {
RTE_PMD_I40E_MB_EVENT_NOOP_ACK, /**< skip mbox request and ACK */
RTE_PMD_I40E_MB_EVENT_NOOP_NACK, /**< skip mbox request and NACK */
RTE_PMD_I40E_MB_EVENT_PROCEED, /**< proceed with mbox request */
RTE_PMD_I40E_MB_EVENT_MAX /**< max value of this enum */
};
/**
* Data sent to the user application when the callback is executed.
*/
struct rte_pmd_i40e_mb_event_param {
uint16_t vfid; /**< Virtual Function number */
uint16_t msg_type; /**< VF to PF message type, see i40e_virtchnl_ops */
uint16_t retval; /**< return value */
void *msg; /**< pointer to message */
uint16_t msglen; /**< length of the message */
};
/**
* Notify VF when PF link status changes.
*
* @param port
* The port identifier of the Ethernet device.
* @param vf
* VF id.
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if *vf* invalid.
*/
int rte_pmd_i40e_ping_vfs(uint8_t port, uint16_t vf);
/**
* Enable/Disable VF MAC anti spoofing.
*
* @param port
* The port identifier of the Ethernet device.
* @param vf_id
* VF on which to set MAC anti spoofing.
* @param on
* 1 - Enable VFs MAC anti spoofing.
* 0 - Disable VFs MAC anti spoofing.
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_i40e_set_vf_mac_anti_spoof(uint8_t port,
uint16_t vf_id,
uint8_t on);
/**
* Enable/Disable VF VLAN anti spoofing.
*
* @param port
* The port identifier of the Ethernet device.
* @param vf_id
* VF on which to set VLAN anti spoofing.
* @param on
* 1 - Enable VFs VLAN anti spoofing.
* 0 - Disable VFs VLAN anti spoofing.
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_i40e_set_vf_vlan_anti_spoof(uint8_t port,
uint16_t vf_id,
uint8_t on);
/**
* Enable/Disable TX loopback on all the PF and VFs.
*
* @param port
* The port identifier of the Ethernet device.
* @param on
* 1 - Enable TX loopback.
* 0 - Disable TX loopback.
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_i40e_set_tx_loopback(uint8_t port,
uint8_t on);
/**
* Enable/Disable VF unicast promiscuous mode.
*
* @param port
* The port identifier of the Ethernet device.
* @param vf_id
* VF on which to set.
* @param on
* 1 - Enable.
* 0 - Disable.
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_i40e_set_vf_unicast_promisc(uint8_t port,
uint16_t vf_id,
uint8_t on);
/**
* Enable/Disable VF multicast promiscuous mode.
*
* @param port
* The port identifier of the Ethernet device.
* @param vf_id
* VF on which to set.
* @param on
* 1 - Enable.
* 0 - Disable.
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_i40e_set_vf_multicast_promisc(uint8_t port,
uint16_t vf_id,
uint8_t on);
/**
* Set the VF MAC address.
*
* PF should set MAC address before VF initialized, if PF sets the MAC
* address after VF initialized, new MAC address won't be effective until
* VF reinitialize.
*
* This will remove all existing MAC filters.
*
* @param port
* The port identifier of the Ethernet device.
* @param vf_id
* VF id.
* @param mac_addr
* VF MAC address.
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if *vf* or *mac_addr* is invalid.
*/
int rte_pmd_i40e_set_vf_mac_addr(uint8_t port, uint16_t vf_id,
struct ether_addr *mac_addr);
/**
* Enable/Disable vf vlan strip for all queues in a pool
*
* @param port
* The port identifier of the Ethernet device.
* @param vf
* ID specifying VF.
* @param on
* 1 - Enable VF's vlan strip on RX queues.
* 0 - Disable VF's vlan strip on RX queues.
*
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
int
rte_pmd_i40e_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on);
/**
* Enable/Disable vf vlan insert
*
* @param port
* The port identifier of the Ethernet device.
* @param vf_id
* ID specifying VF.
* @param vlan_id
* 0 - Disable VF's vlan insert.
* n - Enable; n is inserted as the vlan id.
*
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_i40e_set_vf_vlan_insert(uint8_t port, uint16_t vf_id,
uint16_t vlan_id);
/**
* Enable/Disable vf broadcast mode
*
* @param port
* The port identifier of the Ethernet device.
* @param vf_id
* ID specifying VF.
* @param on
* 0 - Disable broadcast.
* 1 - Enable broadcast.
*
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_i40e_set_vf_broadcast(uint8_t port, uint16_t vf_id,
uint8_t on);
/**
* Enable/Disable vf vlan tag
*
* @param port
* The port identifier of the Ethernet device.
* @param vf_id
* ID specifying VF.
* @param on
* 0 - Disable VF's vlan tag.
* n - Enable VF's vlan tag.
*
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_i40e_set_vf_vlan_tag(uint8_t port, uint16_t vf_id, uint8_t on);
/**
* Enable/Disable VF VLAN filter
*
* @param port
* The port identifier of the Ethernet device.
* @param vlan_id
* ID specifying VLAN
* @param vf_mask
* Mask to filter VF's
* @param on
* 0 - Disable VF's VLAN filter.
* 1 - Enable VF's VLAN filter.
*
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
* - (-ENOTSUP) not supported by firmware.
*/
int rte_pmd_i40e_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id,
uint64_t vf_mask, uint8_t on);
/**
* Get VF's statistics
*
* @param port
* The port identifier of the Ethernet device.
* @param vf_id
* VF on which to get.
* @param stats
* A pointer to a structure of type *rte_eth_stats* to be filled with
* the values of device counters for the following set of statistics:
* - *ipackets* with the total of successfully received packets.
* - *opackets* with the total of successfully transmitted packets.
* - *ibytes* with the total of successfully received bytes.
* - *obytes* with the total of successfully transmitted bytes.
* - *ierrors* with the total of erroneous received packets.
* - *oerrors* with the total of failed transmitted packets.
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_i40e_get_vf_stats(uint8_t port,
uint16_t vf_id,
struct rte_eth_stats *stats);
/**
* Clear VF's statistics
*
* @param port
* The port identifier of the Ethernet device.
* @param vf_id
* VF on which to get.
* @return
* - (0) if successful.
* - (-ENODEV) if *port* invalid.
* - (-EINVAL) if bad parameter.
*/
int rte_pmd_i40e_reset_vf_stats(uint8_t port,
uint16_t vf_id);
#endif /* _PMD_I40E_H_ */