d/numam-dpdk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
63b094f8fa
numam-dpdk/examples/Makefile

89 lines
2.8 KiB
Makefile
Raw Normal View History

use SPDX tag for 6WIND copyrighted files Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
2018-05-03 07:30:11 +00:00
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2016 6WIND S.A.
examples: add a makefile to build all examples It is now possible to build all examples by doing the following: user@droids:~/dpdk.org$ cd examples user@droids:~/dpdk.org/examples$ make RTE_SDK=${PWD}/.. \ RTE_TARGET=x86_64-default-linuxapp-gcc Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-05-16 08:18:58 +00:00
ifeq ($(RTE_SDK),)
$(error "Please define RTE_SDK environment variable")
endif
examples: detect default build directory Most examples have in their makefiles a default RTE_TARGET directory to be used in case RTE_TARGET is not set. Rather than just using a hard-coded default, we can instead detect what the build directory is relative to RTE_SDK directory. This fixes a potential issue for anyone who continues to build using "make install T=x86_64-native-linuxapp-gcc" and skips setting RTE_TARGET explicitly, instead relying on the fact that they were building in a directory which corresponded to the example default path - which was changed to "x86_64-native-linux-gcc" by commit 218c4e68c1d9 ("mk: use linux and freebsd in config names"). Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
2019-03-27 13:58:05 +00:00
# Default target, detect a build directory, by looking for a path with a .config
RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
examples: add a makefile to build all examples It is now possible to build all examples by doing the following: user@droids:~/dpdk.org$ cd examples user@droids:~/dpdk.org/examples$ make RTE_SDK=${PWD}/.. \ RTE_TARGET=x86_64-default-linuxapp-gcc Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-05-16 08:18:58 +00:00
include $(RTE_SDK)/mk/rte.vars.mk
examples/bbdev: add sample app - sample application performing a loop-back over ethernet using a bbbdev device - 'turbo_sw' PMD must be enabled for the app to be functional - a packet is received on an ethdev port -> enqueued for baseband encode operation -> dequeued -> enqueued for baseband decode operation-> dequeued -> compared with original signal -> looped-back to the ethdev port Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
2018-01-11 19:23:22 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_BBDEV) += bbdev_app
examples/bond: add example application for link bonding mode 6 This patch contains an example for link bonding mode 6. It interact with user by a command prompt. Available commands are: Start - starts ARP_thread which respond to ARP_requests and sends ARP_updates (this Is enabled by default after startup), Stop -stops ARP_thread, Send count ip - send count ARP requests for IP, Show - prints basic bond information, like IPv4 statistics from clients Help, Quit. The best way to test mode 6 is to use this example together with previous patch: [PATCH 3/4] bond: add debug info for mode 6 link bonding. Connect clients thru switch to bonding machine and send: arping -c 1 bond_ip or generate IPv4 traffic to bond_ip (IPv4 traffic from different clients should be then balanced on slaves in round robin manner). Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com> Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com> Acked-by: Declan Doherty <declan.doherty@intel.com>
2015-02-20 16:09:21 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += bond
examples: add a makefile to build all examples It is now possible to build all examples by doing the following: user@droids:~/dpdk.org$ cd examples user@droids:~/dpdk.org/examples$ make RTE_SDK=${PWD}/.. \ RTE_TARGET=x86_64-default-linuxapp-gcc Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-05-16 08:18:58 +00:00
DIRS-y += cmdline
examples/distributor: detect high frequency cores The distributor application is bottlenecked by the distributor core, so if we can give more frequency to this core, then the overall performance of the application may increase. This patch uses the rte_power_get_capabilities() API to query the cores provided in the core mask, and if any high frequency cores are found (e.g. Turbo Boost is enabled), we will pin the distributor workload to that core. Signed-off-by: Liang Ma <liang.j.ma@intel.com> Signed-off-by: David Hunt <david.hunt@intel.com> Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
2019-04-01 16:14:41 +00:00
ifeq ($(CONFIG_RTE_LIBRTE_POWER),y)
examples/vm_power: vm power management application For launching CLI thread and Monitor thread and initialising resources. Requires a minimum of two lcores to run, additional cores specified by eal core mask are not used. Signed-off-by: Alan Carew <alan.carew@intel.com> Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2014-11-25 16:18:05 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += distributor
examples/distributor: detect high frequency cores The distributor application is bottlenecked by the distributor core, so if we can give more frequency to this core, then the overall performance of the application may increase. This patch uses the rte_power_get_capabilities() API to query the cores provided in the core mask, and if any high frequency cores are found (e.g. Turbo Boost is enabled), we will pin the distributor workload to that core. Signed-off-by: Liang Ma <liang.j.ma@intel.com> Signed-off-by: David Hunt <david.hunt@intel.com> Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
2019-04-01 16:14:41 +00:00
endif
examples/ethtool: add user-space ethtool sample application Further enhancements to the userspace ethtool implementation that was submitted in 2.1 and packaged as a self-contained sample application. Implements an rte_ethtool shim layer based on rte_ethdev API, along with a command prompt driven demonstration application. Signed-off-by: Remy Horton <remy.horton@intel.com>
2015-12-07 13:48:59 +00:00
DIRS-y += ethtool
examples: add a makefile to build all examples It is now possible to build all examples by doing the following: user@droids:~/dpdk.org$ cd examples user@droids:~/dpdk.org/examples$ make RTE_SDK=${PWD}/.. \ RTE_TARGET=x86_64-default-linuxapp-gcc Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-05-16 08:18:58 +00:00
DIRS-y += exception_path
examples/server_node_efd: renamed from flow_distributor To avoid confusion with distributor app, this commit renames the flow-distributor sample app to server_node_efd, since it shows how to use the EFD library and it is based on a server/nodes model. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2017-01-24 09:06:14 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_EFD) += server_node_efd
examples/fips_validation: fix build The example was not added to the Makefile and there are some compilation errors: examples/fips_validation/main.c: In function ‘prepare_aead_op’: error: control reaches end of non-void function examples/fips_validation/main.c: In function ‘prepare_auth_op’: error: control reaches end of non-void function Fixes: 3d0fad56b74a ("examples/fips_validation: add crypto FIPS application") Fixes: f64adb6714e0 ("examples/fips_validation: support HMAC parsing") Fixes: 4aaad2995e13 ("examples/fips_validation: support GCM parsing") Signed-off-by: Thomas Monjalon <thomas@monjalon.net> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com> Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
2018-11-05 17:37:21 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += fips_validation
examples/flow_classify: add sample application The flow_classify sample application exercises the following librte_flow_classify API's: rte_flow_classifier_create rte_flow_classifier_query rte_flow_classify_table_create rte_flow_classify_table_entry_add rte_flow_classify_table_entry_delete It sets up the IPv4 ACL field definitions. It creates table_acl and adds and deletes rules using the librte_table API. It uses a file of IPv4 five tuple rules for input. Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
2017-10-24 17:28:01 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_FLOW_CLASSIFY) += flow_classify
examples/flow_filtering: add simple demo of flow API This application shows a simple usage of the rte_flow API for hardware filtering offloading. In this demo we are filtering specific IP to specific target queue, while sending all the rest of the packets to other queue. Signed-off-by: Ori Kam <orika@mellanox.com>
2017-11-01 09:42:37 +00:00
DIRS-y += flow_filtering
examples: add a makefile to build all examples It is now possible to build all examples by doing the following: user@droids:~/dpdk.org$ cd examples user@droids:~/dpdk.org/examples$ make RTE_SDK=${PWD}/.. \ RTE_TARGET=x86_64-default-linuxapp-gcc Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-05-16 08:18:58 +00:00
DIRS-y += helloworld
examples: fix build dependencies When building for ARM some examples were failing to compile because of some dependencies disabled. Declaring these dependencies prevent from trying to compile some not supported examples. Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2016-02-05 14:43:56 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_PIPELINE) += ip_pipeline
ifeq ($(CONFIG_RTE_LIBRTE_LPM),y)
DIRS-$(CONFIG_RTE_IP_FRAG) += ip_reassembly
mbuf: remove build option to disable refcnt This patch removes all references to RTE_MBUF_REFCNT, setting the refcnt field in the mbuf struct permanently. Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com> Acked-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2015-02-18 11:03:03 +00:00
DIRS-$(CONFIG_RTE_IP_FRAG) += ip_fragmentation
examples: fix build dependencies When building for ARM some examples were failing to compile because of some dependencies disabled. Declaring these dependencies prevent from trying to compile some not supported examples. Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2016-02-05 14:43:56 +00:00
endif
examples/ipsec-secgw: fix build without security lib Build fails when rte_security is disabled; make rte_security mandatory Fixes: ec17993a145a ("examples/ipsec-secgw: support security offload") Signed-off-by: Radu Nicolau <radu.nicolau@intel.com> Tested-by: David Marchand <david.marchand@6wind.com>
2017-10-26 14:15:13 +00:00
ifeq ($(CONFIG_RTE_LIBRTE_ACL)$(CONFIG_RTE_LIBRTE_HASH)$(CONFIG_RTE_LIBRTE_LPM)$(CONFIG_RTE_LIBRTE_SECURITY),yyyy)
examples: fix build dependencies Building examples fails with CONFIG_RTE_LIBRTE_LPM=n The error is caused by the new app ipsec-secgw that gets build without checking for configuration dependencies. Fixes: d299106e8e31 ("examples/ipsec-secgw: add IPsec sample application") The patch also reorders a couple entries to maintain alphabetic order. Reported-by: Jan Viktorin <viktorin@rehivetech.com> Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2016-03-11 15:32:30 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += ipsec-secgw
endif
examples: fix dependencies on hash library The multi_process example do not need rte_hash. But these examples cannot compile if rte_hash is not available: - ipsec-secgw (was already protected - no change) - ipv4_multicast - l3fwd-power - l3fwd-vf - tep_termination - ip_pipeline The ip_pipeline example is not disabled because its dependencies are handled with #ifdef. It may require a separate fix. Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2016-07-06 14:33:01 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_HASH) += ipv4_multicast
examples: add a makefile to build all examples It is now possible to build all examples by doing the following: user@droids:~/dpdk.org$ cd examples user@droids:~/dpdk.org/examples$ make RTE_SDK=${PWD}/.. \ RTE_TARGET=x86_64-default-linuxapp-gcc Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-05-16 08:18:58 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_KNI) += kni
DIRS-y += l2fwd
examples/l2fwd-cat: add sample application for PQoS CAT and CDP This patch implements PQoS as a sample application. PQoS allows management of the CPUs last level cache, which can be useful for DPDK to ensure quality of service. The sample app links against the existing 01.org PQoS library (https://github.com/01org/intel-cmt-cat). White paper demonstrating example use case "Increasing Platform Determinism with Platform Quality of Service for the Data Plane Development Kit" (http://www.intel.com/content/www/us/en/communications/increasing-platform-determinism-pqos-dpdk-white-paper.html) Signed-off-by: Wojciech Andralojc <wojciechx.andralojc@intel.com> Signed-off-by: Tomasz Kantecki <tomasz.kantecki@intel.com> Signed-off-by: Marcel D Cornu <marcel.d.cornu@intel.com>
2016-03-14 13:46:59 +00:00
ifneq ($(PQOS_INSTALL_PATH),)
DIRS-y += l2fwd-cat
endif
examples: fix build dependencies Building examples fails with CONFIG_RTE_LIBRTE_LPM=n The error is caused by the new app ipsec-secgw that gets build without checking for configuration dependencies. Fixes: d299106e8e31 ("examples/ipsec-secgw: add IPsec sample application") The patch also reorders a couple entries to maintain alphabetic order. Reported-by: Jan Viktorin <viktorin@rehivetech.com> Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
2016-03-11 15:32:30 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += l2fwd-crypto
examples/l2fwd-jobstats: new example This app demonstrate usage of new rte_jobstats library. It is basically the orginal l2fwd with following modifications to met library requirements: - main_loop() was split into two jobs: forward job and flush job. Logic for those jobs is almost the same as in original application. - stats is moved to rte_alarm callback to not introduce overhead of printing. - stats are expanded to show rte_jobstats statistics. - added new parameter '-l' to automatic thousands separator. Comparing original l2fwd and l2fwd-jobstats apps will show approach what is needed to properly write own application with rte_jobstats measurements. New available statistics: - Total and % of fwd and flush execution time - management time - overhead of rte_timer + overhead of rte_jobstats library - Idle time and % of time spent waiting for fwd or flush to be ready to execute. - per job execution time and period. Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2015-02-24 16:33:24 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_JOBSTATS) += l2fwd-jobstats
examples/l2fwd-keepalive: add sample application Modified version of l2fwd to demonstrate keep-alive functionality. Signed-off-by: Remy Horton <remy.horton@intel.com> Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com> Signed-off-by: John J Browne <john.j.browne@intel.com>
2015-11-18 14:05:16 +00:00
DIRS-y += l2fwd-keepalive
examples/l2fwd-keepalive: add IPC liveness reporting Changes the l2fwd keepalive example to show how the new keepalive enhancements can be used to relay core state to an external process. Signed-off-by: Remy Horton <remy.horton@intel.com>
2016-06-15 15:25:51 +00:00
DIRS-y += l2fwd-keepalive/ka-agent
examples: fix dependencies on hash library The multi_process example do not need rte_hash. But these examples cannot compile if rte_hash is not available: - ipsec-secgw (was already protected - no change) - ipv4_multicast - l3fwd-power - l3fwd-vf - tep_termination - ip_pipeline The ip_pipeline example is not disabled because its dependencies are handled with #ifdef. It may require a separate fix. Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2016-07-06 14:33:01 +00:00
ifeq ($(CONFIG_RTE_LIBRTE_HASH),y)
examples: fix build dependencies When building for ARM some examples were failing to compile because of some dependencies disabled. Declaring these dependencies prevent from trying to compile some not supported examples. Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2016-02-05 14:43:56 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_LPM) += l3fwd
examples: fix dependencies on hash library The multi_process example do not need rte_hash. But these examples cannot compile if rte_hash is not available: - ipsec-secgw (was already protected - no change) - ipv4_multicast - l3fwd-power - l3fwd-vf - tep_termination - ip_pipeline The ip_pipeline example is not disabled because its dependencies are handled with #ifdef. It may require a separate fix. Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2016-07-06 14:33:01 +00:00
endif
acl: new sample l3fwd-acl Demonstrates the use of the ACL library in the DPDK application to implement packet classification and L3 forwarding. Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Tested-by: Waterman Cao <waterman.cao@intel.com> Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com> [Thomas: some code-style changes]
2014-06-13 11:26:53 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_ACL) += l3fwd-acl
examples: fix dependencies on hash library The multi_process example do not need rte_hash. But these examples cannot compile if rte_hash is not available: - ipsec-secgw (was already protected - no change) - ipv4_multicast - l3fwd-power - l3fwd-vf - tep_termination - ip_pipeline The ip_pipeline example is not disabled because its dependencies are handled with #ifdef. It may require a separate fix. Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2016-07-06 14:33:01 +00:00
ifeq ($(CONFIG_RTE_LIBRTE_LPM)$(CONFIG_RTE_LIBRTE_HASH),yy)
examples: ignore linux apps on bsd Do not try to build Linux examples in a BSD environment. Reported-by: Bruce Richardson <bruce.richardson@intel.com> Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-07-02 22:07:15 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_POWER) += l3fwd-power
examples: add a makefile to build all examples It is now possible to build all examples by doing the following: user@droids:~/dpdk.org$ cd examples user@droids:~/dpdk.org/examples$ make RTE_SDK=${PWD}/.. \ RTE_TARGET=x86_64-default-linuxapp-gcc Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-05-16 08:18:58 +00:00
DIRS-y += l3fwd-vf
examples: fix build dependencies When building for ARM some examples were failing to compile because of some dependencies disabled. Declaring these dependencies prevent from trying to compile some not supported examples. Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2016-02-05 14:43:56 +00:00
endif
examples: add a makefile to build all examples It is now possible to build all examples by doing the following: user@droids:~/dpdk.org$ cd examples user@droids:~/dpdk.org/examples$ make RTE_SDK=${PWD}/.. \ RTE_TARGET=x86_64-default-linuxapp-gcc Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-05-16 08:18:58 +00:00
DIRS-y += link_status_interrupt
examples: fix build dependencies When building for ARM some examples were failing to compile because of some dependencies disabled. Declaring these dependencies prevent from trying to compile some not supported examples. Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2016-02-05 14:43:56 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_LPM) += load_balancer
examples: add a makefile to build all examples It is now possible to build all examples by doing the following: user@droids:~/dpdk.org$ cd examples user@droids:~/dpdk.org/examples$ make RTE_SDK=${PWD}/.. \ RTE_TARGET=x86_64-default-linuxapp-gcc Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-05-16 08:18:58 +00:00
DIRS-y += multi_process
DIRS-y += netmap_compat/bridge
examples/ntb: add example for NTB Enable an example for rawdev ntb. Support interactive mode to send file on one host and receive file from another host. The command line would be 'send [filepath]' and 'receive [filepath]'. But since the FIFO is not enabled right now, use rte_memcpy as the enqueue and dequeue functions and only support transmitting file no more than 4M. Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com> Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
2019-07-02 06:25:21 +00:00
DIRS-y += ntb
examples/packet_ordering: new sample app This new app makes use of the librte_reorder library. It requires at least 3 lcores for RX, Workers (1 or more) and TX threads. Communication between RX-Workers and Workers-TX is done by using rings. The flow of mbufs is the following: * RX thread gets mbufs from driver, set sequence number and enqueue them in ring. * Workers dequeue mbufs from ring, do some 'work' and enqueue mbufs in ring. * TX dequeue mbufs from ring, inserts them in reorder buffer, drains mbufs from reorder and sends them to the driver. Signed-off-by: Reshma Pattan <reshma.pattan@intel.com> Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Declan Doherty <declan.doherty@intel.com> [Thomas: add in examples/Makefile]
2015-02-18 14:58:15 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_REORDER) += packet_ordering
examples: enable build of performance-thread The performance-thread example was not build by default in the make examples build target. It will compile ok for x86_64 targets so add it to the examples makefile list for that platform. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Declan Doherty <declan.doherty@intel.com>
2017-03-29 16:38:53 +00:00
ifeq ($(CONFIG_RTE_ARCH_X86_64),y)
DIRS-y += performance-thread
endif
examples/ptpclient: add minimal PTP client Add a sample application that acts as a PTP slave using the DPDK ieee1588 functions. Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com> Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Reviewed-by: John McNamara <john.mcnamara@intel.com>
2015-11-13 16:09:13 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_IEEE1588) += ptpclient
examples: add a makefile to build all examples It is now possible to build all examples by doing the following: user@droids:~/dpdk.org$ cd examples user@droids:~/dpdk.org/examples$ make RTE_SDK=${PWD}/.. \ RTE_TARGET=x86_64-default-linuxapp-gcc Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-05-16 08:18:58 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_METER) += qos_meter
DIRS-$(CONFIG_RTE_LIBRTE_SCHED) += qos_sched
examples/quota_watermark: use ring space for watermarks Now that the enqueue function returns the amount of space in the ring, we can use that to replace the old watermark functionality. Update the example app to do so, and re-enable it in the examples Makefile. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Acked-by: Olivier Matz <olivier.matz@6wind.com>
2017-03-29 15:21:26 +00:00
DIRS-y += quota_watermark
examples/rxtx_callbacks: show use of callbacks Example showing how callbacks can be used to insert a timestamp into each packet on RX. On TX the timestamp is used to calculate the packet latency through the app, in cycles. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Signed-off-by: John McNamara <john.mcnamara@intel.com> Acked-by: Declan Doherty <declan.doherty@intel.com>
2015-02-23 18:30:10 +00:00
DIRS-$(CONFIG_RTE_ETHDEV_RXTX_CALLBACKS) += rxtx_callbacks
examples/service_cores: add new sample application This commit adds a new sample app, which showcases the value of running services. In particular it allows the application to dynamically schedule services to service-cores. The sample app itself registers a number of dummy services, and applies different profiles to them at runtime. Note that this sample application does not forward any traffic - it demonstrates advanced usage of the service cores API. Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Gage Eads <gage.eads@intel.com>
2017-10-19 10:31:11 +00:00
DIRS-y += service_cores
examples/skeleton: very simple code for packet forwarding This is a very simple example app for doing packet forwarding with the Intel DPDK. It's designed to serve as a start point for people new to the Intel DPDK and who want to develop a new app. Therefore it's meant to: * have as good a performance out-of-the-box as possible, using the best-known settings for configuring the PMDs, so that any new apps can be based off it. * be kept as short as possible to make it easy to understand it and get started with it. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
2014-11-14 14:31:50 +00:00
DIRS-y += skeleton
examples: fix dependencies on hash library The multi_process example do not need rte_hash. But these examples cannot compile if rte_hash is not available: - ipsec-secgw (was already protected - no change) - ipv4_multicast - l3fwd-power - l3fwd-vf - tep_termination - ip_pipeline The ip_pipeline example is not disabled because its dependencies are handled with #ifdef. It may require a separate fix. Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2016-07-06 14:33:01 +00:00
ifeq ($(CONFIG_RTE_LIBRTE_HASH),y)
examples/tep_term: fix vhost dependency The VXLAN example needs vhost library. Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
2015-06-25 08:56:09 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_VHOST) += tep_termination
examples: fix dependencies on hash library The multi_process example do not need rte_hash. But these examples cannot compile if rte_hash is not available: - ipsec-secgw (was already protected - no change) - ipv4_multicast - l3fwd-power - l3fwd-vf - tep_termination - ip_pipeline The ip_pipeline example is not disabled because its dependencies are handled with #ifdef. It may require a separate fix. Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2016-07-06 14:33:01 +00:00
endif
examples: add dependencies for timer and vm_power_manager Do not compile these examples if the related dpdk option is not enabled, as it's done for other examples. It allows to build the examples directory with a reduced dpdk configuration. Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
2015-05-18 08:18:01 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_TIMER) += timer
examples/vdpa: introduce a new sample for vDPA The vdpa sample application creates vhost-user sockets by using the vDPA backend. vDPA stands for vhost Data Path Acceleration which utilizes virtio ring compatible devices to serve virtio driver directly to enable datapath acceleration. As vDPA driver can help to set up vhost datapath, this application doesn't need to launch dedicated worker threads for vhost enqueue/dequeue operations. Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com> Acked-by: Xiao Wang <xiao.w.wang@intel.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2018-09-28 21:47:47 +00:00
DIRS-$(CONFIG_RTE_LIBRTE_VHOST) += vhost vhost_scsi vdpa
examples/vhost_crypto: add sample application This patch adds vhost_crypto sample application to DPDK. Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com> Acked-by: Jay Zhou <jianjay.zhou@huawei.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2018-04-05 16:01:36 +00:00
ifeq ($(CONFIG_RTE_LIBRTE_CRYPTODEV),y)
DIRS-$(CONFIG_RTE_LIBRTE_VHOST) += vhost_crypto
endif
examples: add a makefile to build all examples It is now possible to build all examples by doing the following: user@droids:~/dpdk.org$ cd examples user@droids:~/dpdk.org/examples$ make RTE_SDK=${PWD}/.. \ RTE_TARGET=x86_64-default-linuxapp-gcc Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-05-16 08:18:58 +00:00
DIRS-y += vmdq
DIRS-y += vmdq_dcb
examples/vm_power_manager: fix libvirt dependency check vm_power_manager utilize libvirt API virDomainGetVcpuPinInfo to retrieve domU vcpu information. This API is implemented from version 0.9.3. Suse11 SP3 32bit default libvirt version is 0.8.8. examples/vm_power_manager/channel_manager.c: channel_manager.c:117:3: error: implicit declaration of function 'virDomainGetVcpuPinInfo' Check and skip it from examples or raise an error when trying to compile without libvirt or with a too old libvirt. Fixes: e8ae9b662 ("examples/vm_power: channel manager and monitor in host") Signed-off-by: Marvin Liu <yong.liu@intel.com> Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2016-04-11 08:50:31 +00:00
ifeq ($(CONFIG_RTE_LIBRTE_POWER), y)
ifeq ($(shell pkg-config --atleast-version=0.9.3 libvirt; echo $$?), 0)
DIRS-y += vm_power_manager
else
$(info vm_power_manager requires libvirt >= 0.9.3)
endif
endif
examples/performance-thread: mark as experimental This commit removes the performance thread example from examples/Makefile, and marks the example as "experimental" in the release note, and it its API headers files. Signed-off-by: Ian Betts <ian.betts@intel.com>
2015-12-10 12:24:58 +00:00
examples/eventdev: rename example Rename eventdev_pipeline_sw_pmd to eventdev_pipeline as it is no longer specific underlying event device. Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com> Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
2018-01-10 11:10:12 +00:00
DIRS-y += eventdev_pipeline
examples/eventdev_pipeline_sw_pmd: add sample app This commit adds a sample app for the eventdev library. The app has been tested with DPDK 17.05-rc2, hence this release (or later) is recommended. The sample app showcases a pipeline processing use-case, with event scheduling and processing defined per stage. The application receives traffic as normal, with each packet traversing the pipeline. Once the packet has been processed by each of the pipeline stages, it is transmitted again. The app provides a framework to utilize cores for a single role or multiple roles. Examples of roles are the RX core, TX core, Scheduling core (in the case of the event/sw PMD), and worker cores. Various flags are available to configure numbers of stages, cycles of work at each stage, type of scheduling, number of worker cores, queue depths etc. For a full explaination, please refer to the documentation. Signed-off-by: Gage Eads <gage.eads@intel.com> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Signed-off-by: David Hunt <david.hunt@intel.com> Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
2017-07-06 14:35:14 +00:00
examples: add a makefile to build all examples It is now possible to build all examples by doing the following: user@droids:~/dpdk.org$ cd examples user@droids:~/dpdk.org/examples$ make RTE_SDK=${PWD}/.. \ RTE_TARGET=x86_64-default-linuxapp-gcc Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-05-16 08:18:58 +00:00
include $(RTE_SDK)/mk/rte.extsubdir.mk
Reference in New Issue Copy Permalink