numam-dpdk/examples/ip_reassembly/main.c

1212 lines
29 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright(c) 2010-2014 Intel Corporation
*/
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <inttypes.h>
#include <sys/types.h>
#include <string.h>
#include <sys/queue.h>
#include <stdarg.h>
#include <errno.h>
#include <getopt.h>
#include <signal.h>
#include <sys/param.h>
#include <rte_common.h>
#include <rte_byteorder.h>
#include <rte_log.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
#include <rte_eal.h>
#include <rte_launch.h>
#include <rte_atomic.h>
#include <rte_cycles.h>
#include <rte_prefetch.h>
#include <rte_lcore.h>
#include <rte_per_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_interrupts.h>
#include <rte_random.h>
#include <rte_debug.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
#include <rte_malloc.h>
#include <rte_ip.h>
#include <rte_tcp.h>
#include <rte_udp.h>
#include <rte_string_fns.h>
#include <rte_lpm.h>
#include <rte_lpm6.h>
#include <rte_ip_frag.h>
#define MAX_PKT_BURST 32
#define RTE_LOGTYPE_IP_RSMBL RTE_LOGTYPE_USER1
#define MAX_JUMBO_PKT_LEN 9600
#define BUF_SIZE RTE_MBUF_DEFAULT_DATAROOM
#define MBUF_DATA_SIZE RTE_MBUF_DEFAULT_BUF_SIZE
#define NB_MBUF 8192
#define MEMPOOL_CACHE_SIZE 256
/* allow max jumbo frame 9.5 KB */
#define JUMBO_FRAME_MAX_SIZE 0x2600
#define MAX_FLOW_NUM UINT16_MAX
#define MIN_FLOW_NUM 1
#define DEF_FLOW_NUM 0x1000
/* TTL numbers are in ms. */
#define MAX_FLOW_TTL (3600 * MS_PER_S)
#define MIN_FLOW_TTL 1
#define DEF_FLOW_TTL MS_PER_S
#define MAX_FRAG_NUM RTE_LIBRTE_IP_FRAG_MAX_FRAG
/* Should be power of two. */
#define IP_FRAG_TBL_BUCKET_ENTRIES 16
static uint32_t max_flow_num = DEF_FLOW_NUM;
static uint32_t max_flow_ttl = DEF_FLOW_TTL;
#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
#define NB_SOCKETS 8
/* Configure how many packets ahead to prefetch, when reading packets */
#define PREFETCH_OFFSET 3
/*
* Configurable number of RX/TX ring descriptors
*/
#define RTE_TEST_RX_DESC_DEFAULT 1024
#define RTE_TEST_TX_DESC_DEFAULT 1024
static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
/* ethernet addresses of ports */
static struct rte_ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
#ifndef IPv4_BYTES
#define IPv4_BYTES_FMT "%" PRIu8 ".%" PRIu8 ".%" PRIu8 ".%" PRIu8
#define IPv4_BYTES(addr) \
(uint8_t) (((addr) >> 24) & 0xFF),\
(uint8_t) (((addr) >> 16) & 0xFF),\
(uint8_t) (((addr) >> 8) & 0xFF),\
(uint8_t) ((addr) & 0xFF)
#endif
#ifndef IPv6_BYTES
#define IPv6_BYTES_FMT "%02x%02x:%02x%02x:%02x%02x:%02x%02x:"\
"%02x%02x:%02x%02x:%02x%02x:%02x%02x"
#define IPv6_BYTES(addr) \
addr[0], addr[1], addr[2], addr[3], \
addr[4], addr[5], addr[6], addr[7], \
addr[8], addr[9], addr[10], addr[11],\
addr[12], addr[13],addr[14], addr[15]
#endif
#define IPV6_ADDR_LEN 16
/* mask of enabled ports */
static uint32_t enabled_port_mask = 0;
static int rx_queue_per_lcore = 1;
struct mbuf_table {
uint32_t len;
uint32_t head;
uint32_t tail;
struct rte_mbuf *m_table[0];
};
struct rx_queue {
struct rte_ip_frag_tbl *frag_tbl;
struct rte_mempool *pool;
struct rte_lpm *lpm;
struct rte_lpm6 *lpm6;
uint16_t portid;
};
struct tx_lcore_stat {
uint64_t call;
uint64_t drop;
uint64_t queue;
uint64_t send;
};
#define MAX_RX_QUEUE_PER_LCORE 16
#define MAX_TX_QUEUE_PER_PORT 16
#define MAX_RX_QUEUE_PER_PORT 128
struct lcore_queue_conf {
uint16_t n_rx_queue;
struct rx_queue rx_queue_list[MAX_RX_QUEUE_PER_LCORE];
uint16_t tx_queue_id[RTE_MAX_ETHPORTS];
struct rte_ip_frag_death_row death_row;
struct mbuf_table *tx_mbufs[RTE_MAX_ETHPORTS];
struct tx_lcore_stat tx_stat;
} __rte_cache_aligned;
static struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
static struct rte_eth_conf port_conf = {
.rxmode = {
.mq_mode = ETH_MQ_RX_RSS,
.max_rx_pkt_len = JUMBO_FRAME_MAX_SIZE,
.split_hdr_size = 0,
.offloads = (DEV_RX_OFFLOAD_CHECKSUM |
DEV_RX_OFFLOAD_JUMBO_FRAME),
},
.rx_adv_conf = {
.rss_conf = {
.rss_key = NULL,
.rss_hf = ETH_RSS_IP,
},
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
.offloads = (DEV_TX_OFFLOAD_IPV4_CKSUM |
DEV_TX_OFFLOAD_MULTI_SEGS),
},
};
/*
* IPv4 forwarding table
*/
struct l3fwd_ipv4_route {
uint32_t ip;
uint8_t depth;
uint8_t if_out;
};
struct l3fwd_ipv4_route l3fwd_ipv4_route_array[] = {
{RTE_IPV4(100,10,0,0), 16, 0},
{RTE_IPV4(100,20,0,0), 16, 1},
{RTE_IPV4(100,30,0,0), 16, 2},
{RTE_IPV4(100,40,0,0), 16, 3},
{RTE_IPV4(100,50,0,0), 16, 4},
{RTE_IPV4(100,60,0,0), 16, 5},
{RTE_IPV4(100,70,0,0), 16, 6},
{RTE_IPV4(100,80,0,0), 16, 7},
};
/*
* IPv6 forwarding table
*/
struct l3fwd_ipv6_route {
uint8_t ip[IPV6_ADDR_LEN];
uint8_t depth;
uint8_t if_out;
};
static struct l3fwd_ipv6_route l3fwd_ipv6_route_array[] = {
{{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 0},
{{2,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 1},
{{3,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 2},
{{4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 3},
{{5,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 4},
{{6,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 5},
{{7,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 6},
{{8,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 7},
};
#define LPM_MAX_RULES 1024
#define LPM6_MAX_RULES 1024
#define LPM6_NUMBER_TBL8S (1 << 16)
struct rte_lpm6_config lpm6_config = {
.max_rules = LPM6_MAX_RULES,
.number_tbl8s = LPM6_NUMBER_TBL8S,
.flags = 0
};
static struct rte_lpm *socket_lpm[RTE_MAX_NUMA_NODES];
static struct rte_lpm6 *socket_lpm6[RTE_MAX_NUMA_NODES];
#ifdef RTE_LIBRTE_IP_FRAG_TBL_STAT
#define TX_LCORE_STAT_UPDATE(s, f, v) ((s)->f += (v))
#else
#define TX_LCORE_STAT_UPDATE(s, f, v) do {} while (0)
#endif /* RTE_LIBRTE_IP_FRAG_TBL_STAT */
/*
* If number of queued packets reached given threahold, then
* send burst of packets on an output interface.
*/
static inline uint32_t
send_burst(struct lcore_queue_conf *qconf, uint32_t thresh, uint16_t port)
{
uint32_t fill, len, k, n;
struct mbuf_table *txmb;
txmb = qconf->tx_mbufs[port];
len = txmb->len;
if ((int32_t)(fill = txmb->head - txmb->tail) < 0)
fill += len;
if (fill >= thresh) {
n = RTE_MIN(len - txmb->tail, fill);
k = rte_eth_tx_burst(port, qconf->tx_queue_id[port],
txmb->m_table + txmb->tail, (uint16_t)n);
TX_LCORE_STAT_UPDATE(&qconf->tx_stat, call, 1);
TX_LCORE_STAT_UPDATE(&qconf->tx_stat, send, k);
fill -= k;
if ((txmb->tail += k) == len)
txmb->tail = 0;
}
return fill;
}
/* Enqueue a single packet, and send burst if queue is filled */
static inline int
send_single_packet(struct rte_mbuf *m, uint16_t port)
{
uint32_t fill, lcore_id, len;
struct lcore_queue_conf *qconf;
struct mbuf_table *txmb;
lcore_id = rte_lcore_id();
qconf = &lcore_queue_conf[lcore_id];
txmb = qconf->tx_mbufs[port];
len = txmb->len;
fill = send_burst(qconf, MAX_PKT_BURST, port);
if (fill == len - 1) {
TX_LCORE_STAT_UPDATE(&qconf->tx_stat, drop, 1);
rte_pktmbuf_free(txmb->m_table[txmb->tail]);
if (++txmb->tail == len)
txmb->tail = 0;
}
TX_LCORE_STAT_UPDATE(&qconf->tx_stat, queue, 1);
txmb->m_table[txmb->head] = m;
if(++txmb->head == len)
txmb->head = 0;
return 0;
}
static inline void
reassemble(struct rte_mbuf *m, uint16_t portid, uint32_t queue,
struct lcore_queue_conf *qconf, uint64_t tms)
{
struct rte_ether_hdr *eth_hdr;
struct rte_ip_frag_tbl *tbl;
struct rte_ip_frag_death_row *dr;
struct rx_queue *rxq;
void *d_addr_bytes;
uint32_t next_hop;
uint16_t dst_port;
rxq = &qconf->rx_queue_list[queue];
eth_hdr = rte_pktmbuf_mtod(m, struct rte_ether_hdr *);
dst_port = portid;
/* if packet is IPv4 */
if (RTE_ETH_IS_IPV4_HDR(m->packet_type)) {
struct rte_ipv4_hdr *ip_hdr;
uint32_t ip_dst;
ip_hdr = (struct rte_ipv4_hdr *)(eth_hdr + 1);
/* if it is a fragmented packet, then try to reassemble. */
if (rte_ipv4_frag_pkt_is_fragmented(ip_hdr)) {
struct rte_mbuf *mo;
tbl = rxq->frag_tbl;
dr = &qconf->death_row;
/* prepare mbuf: setup l2_len/l3_len. */
mbuf: flatten struct vlan_macip The vlan_macip structure combined a vlan tag id with l2 and l3 headers lengths for tracking offloads. However, this structure was only used as a unit by the e1000 and ixgbe drivers, not generally. This patch removes the structure from the mbuf header and places the fields into the mbuf structure directly at the required point, without any net effect on the structure layout. This allows us to treat the vlan tags and header length fields as separate for future mbuf changes. The drivers which were written to use the combined structure still do so, using a driver-local definition of it. Reduce perf regression caused by splitting vlan_macip field. This is done by providing a single uint16_t value to allow writing/clearing the l2 and l3 lengths together. There is still a small perf hit to the slow path TX due to the reads from vlan_tci and l2/l3 lengths being separated. (<5% in my tests with testpmd with no extra params). Unfortunately, this cannot be eliminated, without restoring the vlan tags and l2/l3 lengths as a combined 32-bit field. This would prevent us from ever looking to move those fields about and is an artificial tie that applies only for performance in igb and ixgbe drivers. Therefore, this patch keeps the vlan_tci field separate from the lengths as the best solution going forward. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2014-09-09 14:40:56 +00:00
m->l2_len = sizeof(*eth_hdr);
m->l3_len = sizeof(*ip_hdr);
/* process this fragment. */
mo = rte_ipv4_frag_reassemble_packet(tbl, dr, m, tms, ip_hdr);
if (mo == NULL)
/* no packet to send out. */
return;
/* we have our packet reassembled. */
if (mo != m) {
m = mo;
eth_hdr = rte_pktmbuf_mtod(m,
struct rte_ether_hdr *);
ip_hdr = (struct rte_ipv4_hdr *)(eth_hdr + 1);
}
/* update offloading flags */
m->ol_flags |= (PKT_TX_IPV4 | PKT_TX_IP_CKSUM);
}
ip_dst = rte_be_to_cpu_32(ip_hdr->dst_addr);
/* Find destination port */
if (rte_lpm_lookup(rxq->lpm, ip_dst, &next_hop) == 0 &&
(enabled_port_mask & 1 << next_hop) != 0) {
dst_port = next_hop;
}
eth_hdr->ether_type = rte_be_to_cpu_16(RTE_ETHER_TYPE_IPV4);
} else if (RTE_ETH_IS_IPV6_HDR(m->packet_type)) {
/* if packet is IPv6 */
struct ipv6_extension_fragment *frag_hdr;
struct rte_ipv6_hdr *ip_hdr;
ip_hdr = (struct rte_ipv6_hdr *)(eth_hdr + 1);
frag_hdr = rte_ipv6_frag_get_ipv6_fragment_header(ip_hdr);
if (frag_hdr != NULL) {
struct rte_mbuf *mo;
tbl = rxq->frag_tbl;
dr = &qconf->death_row;
/* prepare mbuf: setup l2_len/l3_len. */
mbuf: flatten struct vlan_macip The vlan_macip structure combined a vlan tag id with l2 and l3 headers lengths for tracking offloads. However, this structure was only used as a unit by the e1000 and ixgbe drivers, not generally. This patch removes the structure from the mbuf header and places the fields into the mbuf structure directly at the required point, without any net effect on the structure layout. This allows us to treat the vlan tags and header length fields as separate for future mbuf changes. The drivers which were written to use the combined structure still do so, using a driver-local definition of it. Reduce perf regression caused by splitting vlan_macip field. This is done by providing a single uint16_t value to allow writing/clearing the l2 and l3 lengths together. There is still a small perf hit to the slow path TX due to the reads from vlan_tci and l2/l3 lengths being separated. (<5% in my tests with testpmd with no extra params). Unfortunately, this cannot be eliminated, without restoring the vlan tags and l2/l3 lengths as a combined 32-bit field. This would prevent us from ever looking to move those fields about and is an artificial tie that applies only for performance in igb and ixgbe drivers. Therefore, this patch keeps the vlan_tci field separate from the lengths as the best solution going forward. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2014-09-09 14:40:56 +00:00
m->l2_len = sizeof(*eth_hdr);
m->l3_len = sizeof(*ip_hdr) + sizeof(*frag_hdr);
mo = rte_ipv6_frag_reassemble_packet(tbl, dr, m, tms, ip_hdr, frag_hdr);
if (mo == NULL)
return;
if (mo != m) {
m = mo;
eth_hdr = rte_pktmbuf_mtod(m,
struct rte_ether_hdr *);
ip_hdr = (struct rte_ipv6_hdr *)(eth_hdr + 1);
}
}
/* Find destination port */
if (rte_lpm6_lookup(rxq->lpm6, ip_hdr->dst_addr,
&next_hop) == 0 &&
(enabled_port_mask & 1 << next_hop) != 0) {
dst_port = next_hop;
}
eth_hdr->ether_type = rte_be_to_cpu_16(RTE_ETHER_TYPE_IPV6);
}
/* if packet wasn't IPv4 or IPv6, it's forwarded to the port it came from */
/* 02:00:00:00:00:xx */
d_addr_bytes = &eth_hdr->d_addr.addr_bytes[0];
*((uint64_t *)d_addr_bytes) = 0x000000000002 + ((uint64_t)dst_port << 40);
/* src addr */
rte_ether_addr_copy(&ports_eth_addr[dst_port], &eth_hdr->s_addr);
send_single_packet(m, dst_port);
}
/* main processing loop */
static int
main_loop(__rte_unused void *dummy)
{
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
unsigned lcore_id;
uint64_t diff_tsc, cur_tsc, prev_tsc;
int i, j, nb_rx;
uint16_t portid;
struct lcore_queue_conf *qconf;
const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
prev_tsc = 0;
lcore_id = rte_lcore_id();
qconf = &lcore_queue_conf[lcore_id];
if (qconf->n_rx_queue == 0) {
RTE_LOG(INFO, IP_RSMBL, "lcore %u has nothing to do\n", lcore_id);
return 0;
}
RTE_LOG(INFO, IP_RSMBL, "entering main loop on lcore %u\n", lcore_id);
for (i = 0; i < qconf->n_rx_queue; i++) {
portid = qconf->rx_queue_list[i].portid;
RTE_LOG(INFO, IP_RSMBL, " -- lcoreid=%u portid=%u\n", lcore_id,
portid);
}
while (1) {
cur_tsc = rte_rdtsc();
/*
* TX burst queue drain
*/
diff_tsc = cur_tsc - prev_tsc;
if (unlikely(diff_tsc > drain_tsc)) {
/*
* This could be optimized (use queueid instead of
* portid), but it is not called so often
*/
for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
if ((enabled_port_mask & (1 << portid)) != 0)
send_burst(qconf, 1, portid);
}
prev_tsc = cur_tsc;
}
/*
* Read packet from RX queues
*/
for (i = 0; i < qconf->n_rx_queue; ++i) {
portid = qconf->rx_queue_list[i].portid;
nb_rx = rte_eth_rx_burst(portid, 0, pkts_burst,
MAX_PKT_BURST);
/* Prefetch first packets */
for (j = 0; j < PREFETCH_OFFSET && j < nb_rx; j++) {
rte_prefetch0(rte_pktmbuf_mtod(
pkts_burst[j], void *));
}
/* Prefetch and forward already prefetched packets */
for (j = 0; j < (nb_rx - PREFETCH_OFFSET); j++) {
rte_prefetch0(rte_pktmbuf_mtod(pkts_burst[
j + PREFETCH_OFFSET], void *));
reassemble(pkts_burst[j], portid,
i, qconf, cur_tsc);
}
/* Forward remaining prefetched packets */
for (; j < nb_rx; j++) {
reassemble(pkts_burst[j], portid,
i, qconf, cur_tsc);
}
rte_ip_frag_free_death_row(&qconf->death_row,
PREFETCH_OFFSET);
}
}
}
/* display usage */
static void
print_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]"
" [--max-pkt-len PKTLEN]"
" [--maxflows=<flows>] [--flowttl=<ttl>[(s|ms)]]\n"
" -p PORTMASK: hexadecimal bitmask of ports to configure\n"
" -q NQ: number of RX queues per lcore\n"
" --maxflows=<flows>: optional, maximum number of flows "
"supported\n"
" --flowttl=<ttl>[(s|ms)]: optional, maximum TTL for each "
"flow\n",
prgname);
}
static uint32_t
parse_flow_num(const char *str, uint32_t min, uint32_t max, uint32_t *val)
{
char *end;
uint64_t v;
/* parse decimal string */
errno = 0;
v = strtoul(str, &end, 10);
if (errno != 0 || *end != '\0')
return -EINVAL;
if (v < min || v > max)
return -EINVAL;
*val = (uint32_t)v;
return 0;
}
static int
parse_flow_ttl(const char *str, uint32_t min, uint32_t max, uint32_t *val)
{
char *end;
uint64_t v;
static const char frmt_sec[] = "s";
static const char frmt_msec[] = "ms";
/* parse decimal string */
errno = 0;
v = strtoul(str, &end, 10);
if (errno != 0)
return -EINVAL;
if (*end != '\0') {
if (strncmp(frmt_sec, end, sizeof(frmt_sec)) == 0)
v *= MS_PER_S;
else if (strncmp(frmt_msec, end, sizeof (frmt_msec)) != 0)
return -EINVAL;
}
if (v < min || v > max)
return -EINVAL;
*val = (uint32_t)v;
return 0;
}
static int
parse_portmask(const char *portmask)
{
char *end = NULL;
unsigned long pm;
/* parse hexadecimal string */
pm = strtoul(portmask, &end, 16);
if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
return -1;
if (pm == 0)
return -1;
return pm;
}
static int
parse_nqueue(const char *q_arg)
{
char *end = NULL;
unsigned long n;
printf("%p\n", q_arg);
/* parse hexadecimal string */
n = strtoul(q_arg, &end, 10);
if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
return -1;
if (n == 0)
return -1;
if (n >= MAX_RX_QUEUE_PER_LCORE)
return -1;
return n;
}
/* Parse the argument given in the command line of the application */
static int
parse_args(int argc, char **argv)
{
int opt, ret;
char **argvopt;
int option_index;
char *prgname = argv[0];
static struct option lgopts[] = {
{"max-pkt-len", 1, 0, 0},
{"maxflows", 1, 0, 0},
{"flowttl", 1, 0, 0},
{NULL, 0, 0, 0}
};
argvopt = argv;
while ((opt = getopt_long(argc, argvopt, "p:q:",
lgopts, &option_index)) != EOF) {
switch (opt) {
/* portmask */
case 'p':
enabled_port_mask = parse_portmask(optarg);
if (enabled_port_mask == 0) {
printf("invalid portmask\n");
print_usage(prgname);
return -1;
}
break;
/* nqueue */
case 'q':
rx_queue_per_lcore = parse_nqueue(optarg);
if (rx_queue_per_lcore < 0) {
printf("invalid queue number\n");
print_usage(prgname);
return -1;
}
break;
/* long options */
case 0:
if (!strncmp(lgopts[option_index].name,
"maxflows", 8)) {
if ((ret = parse_flow_num(optarg, MIN_FLOW_NUM,
MAX_FLOW_NUM,
&max_flow_num)) != 0) {
printf("invalid value: \"%s\" for "
"parameter %s\n",
optarg,
lgopts[option_index].name);
print_usage(prgname);
return ret;
}
}
if (!strncmp(lgopts[option_index].name, "flowttl", 7)) {
if ((ret = parse_flow_ttl(optarg, MIN_FLOW_TTL,
MAX_FLOW_TTL,
&max_flow_ttl)) != 0) {
printf("invalid value: \"%s\" for "
"parameter %s\n",
optarg,
lgopts[option_index].name);
print_usage(prgname);
return ret;
}
}
break;
default:
print_usage(prgname);
return -1;
}
}
if (optind >= 0)
argv[optind-1] = prgname;
ret = optind-1;
optind = 1; /* reset getopt lib */
return ret;
}
static void
print_ethaddr(const char *name, const struct rte_ether_addr *eth_addr)
{
net: add rte prefix to ether defines Add 'RTE_' prefix to defines: - rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN. - rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN. - rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN. - rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN. - rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN. - rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN. - rename ETHER_MTU as RTE_ETHER_MTU. - rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN. - rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID. - rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN. - rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU. - rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR. - rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR. - rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4. - rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6. - rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP. - rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN. - rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP. - rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ. - rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG. - rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588. - rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW. - rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB. - rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP. - rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS. - rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM. - rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN. - rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE. - rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4. - rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6. - rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH. - rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH. - rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS. - rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP. - rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG. - rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN. Do not update the command line library to avoid adding a dependency to librte_net. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2019-05-21 16:13:05 +00:00
char buf[RTE_ETHER_ADDR_FMT_SIZE];
rte_ether_format_addr(buf, RTE_ETHER_ADDR_FMT_SIZE, eth_addr);
printf("%s%s", name, buf);
}
/* Check the link status of all ports in up to 9s, and print them finally */
static void
check_all_ports_link_status(uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
uint16_t portid;
uint8_t count, all_ports_up, print_flag = 0;
struct rte_eth_link link;
int ret;
printf("\nChecking link status");
fflush(stdout);
for (count = 0; count <= MAX_CHECK_TIME; count++) {
all_ports_up = 1;
RTE_ETH_FOREACH_DEV(portid) {
if ((port_mask & (1 << portid)) == 0)
continue;
memset(&link, 0, sizeof(link));
ret = rte_eth_link_get_nowait(portid, &link);
if (ret < 0) {
all_ports_up = 0;
if (print_flag == 1)
printf("Port %u link get failed: %s\n",
portid, rte_strerror(-ret));
continue;
}
/* print link status if flag set */
if (print_flag == 1) {
if (link.link_status)
printf(
"Port%d Link Up. Speed %u Mbps - %s\n",
portid, link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
("full-duplex") : ("half-duplex"));
else
printf("Port %d Link Down\n", portid);
continue;
}
/* clear all_ports_up flag if any link down */
if (link.link_status == ETH_LINK_DOWN) {
all_ports_up = 0;
break;
}
}
/* after finally printing all link status, get out */
if (print_flag == 1)
break;
if (all_ports_up == 0) {
printf(".");
fflush(stdout);
rte_delay_ms(CHECK_INTERVAL);
}
/* set the print_flag if all ports up or timeout */
if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
print_flag = 1;
printf("\ndone\n");
}
}
}
static int
init_routing_table(void)
{
struct rte_lpm *lpm;
struct rte_lpm6 *lpm6;
int socket, ret;
unsigned i;
for (socket = 0; socket < RTE_MAX_NUMA_NODES; socket++) {
if (socket_lpm[socket]) {
lpm = socket_lpm[socket];
/* populate the LPM table */
for (i = 0; i < RTE_DIM(l3fwd_ipv4_route_array); i++) {
ret = rte_lpm_add(lpm,
l3fwd_ipv4_route_array[i].ip,
l3fwd_ipv4_route_array[i].depth,
l3fwd_ipv4_route_array[i].if_out);
if (ret < 0) {
RTE_LOG(ERR, IP_RSMBL, "Unable to add entry %i to the l3fwd "
"LPM table\n", i);
return -1;
}
RTE_LOG(INFO, IP_RSMBL, "Socket %i: adding route " IPv4_BYTES_FMT
"/%d (port %d)\n",
socket,
IPv4_BYTES(l3fwd_ipv4_route_array[i].ip),
l3fwd_ipv4_route_array[i].depth,
l3fwd_ipv4_route_array[i].if_out);
}
}
if (socket_lpm6[socket]) {
lpm6 = socket_lpm6[socket];
/* populate the LPM6 table */
for (i = 0; i < RTE_DIM(l3fwd_ipv6_route_array); i++) {
ret = rte_lpm6_add(lpm6,
l3fwd_ipv6_route_array[i].ip,
l3fwd_ipv6_route_array[i].depth,
l3fwd_ipv6_route_array[i].if_out);
if (ret < 0) {
RTE_LOG(ERR, IP_RSMBL, "Unable to add entry %i to the l3fwd "
"LPM6 table\n", i);
return -1;
}
RTE_LOG(INFO, IP_RSMBL, "Socket %i: adding route " IPv6_BYTES_FMT
"/%d (port %d)\n",
socket,
IPv6_BYTES(l3fwd_ipv6_route_array[i].ip),
l3fwd_ipv6_route_array[i].depth,
l3fwd_ipv6_route_array[i].if_out);
}
}
}
return 0;
}
static int
setup_port_tbl(struct lcore_queue_conf *qconf, uint32_t lcore, int socket,
uint32_t port)
{
struct mbuf_table *mtb;
uint32_t n;
size_t sz;
n = RTE_MAX(max_flow_num, 2UL * MAX_PKT_BURST);
sz = sizeof (*mtb) + sizeof (mtb->m_table[0]) * n;
if ((mtb = rte_zmalloc_socket(__func__, sz, RTE_CACHE_LINE_SIZE,
socket)) == NULL) {
RTE_LOG(ERR, IP_RSMBL, "%s() for lcore: %u, port: %u "
"failed to allocate %zu bytes\n",
__func__, lcore, port, sz);
return -1;
}
mtb->len = n;
qconf->tx_mbufs[port] = mtb;
return 0;
}
static int
setup_queue_tbl(struct rx_queue *rxq, uint32_t lcore, uint32_t queue)
{
int socket;
uint32_t nb_mbuf;
uint64_t frag_cycles;
char buf[RTE_MEMPOOL_NAMESIZE];
socket = rte_lcore_to_socket_id(lcore);
if (socket == SOCKET_ID_ANY)
socket = 0;
frag_cycles = (rte_get_tsc_hz() + MS_PER_S - 1) / MS_PER_S *
max_flow_ttl;
if ((rxq->frag_tbl = rte_ip_frag_table_create(max_flow_num,
IP_FRAG_TBL_BUCKET_ENTRIES, max_flow_num, frag_cycles,
socket)) == NULL) {
RTE_LOG(ERR, IP_RSMBL, "ip_frag_tbl_create(%u) on "
"lcore: %u for queue: %u failed\n",
max_flow_num, lcore, queue);
return -1;
}
/*
* At any given moment up to <max_flow_num * (MAX_FRAG_NUM)>
* mbufs could be stored int the fragment table.
* Plus, each TX queue can hold up to <max_flow_num> packets.
*/
nb_mbuf = RTE_MAX(max_flow_num, 2UL * MAX_PKT_BURST) * MAX_FRAG_NUM;
nb_mbuf *= (port_conf.rxmode.max_rx_pkt_len + BUF_SIZE - 1) / BUF_SIZE;
nb_mbuf *= 2; /* ipv4 and ipv6 */
nb_mbuf += nb_rxd + nb_txd;
nb_mbuf = RTE_MAX(nb_mbuf, (uint32_t)NB_MBUF);
snprintf(buf, sizeof(buf), "mbuf_pool_%u_%u", lcore, queue);
rxq->pool = rte_pktmbuf_pool_create(buf, nb_mbuf, MEMPOOL_CACHE_SIZE, 0,
MBUF_DATA_SIZE, socket);
if (rxq->pool == NULL) {
RTE_LOG(ERR, IP_RSMBL,
"rte_pktmbuf_pool_create(%s) failed", buf);
return -1;
}
return 0;
}
static int
init_mem(void)
{
char buf[PATH_MAX];
struct rte_lpm *lpm;
struct rte_lpm6 *lpm6;
struct rte_lpm_config lpm_config;
int socket;
unsigned lcore_id;
/* traverse through lcores and initialize structures on each socket */
for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
if (rte_lcore_is_enabled(lcore_id) == 0)
continue;
socket = rte_lcore_to_socket_id(lcore_id);
if (socket == SOCKET_ID_ANY)
socket = 0;
if (socket_lpm[socket] == NULL) {
RTE_LOG(INFO, IP_RSMBL, "Creating LPM table on socket %i\n", socket);
snprintf(buf, sizeof(buf), "IP_RSMBL_LPM_%i", socket);
lpm_config.max_rules = LPM_MAX_RULES;
lpm_config.number_tbl8s = 256;
lpm_config.flags = 0;
lpm = rte_lpm_create(buf, socket, &lpm_config);
if (lpm == NULL) {
RTE_LOG(ERR, IP_RSMBL, "Cannot create LPM table\n");
return -1;
}
socket_lpm[socket] = lpm;
}
if (socket_lpm6[socket] == NULL) {
RTE_LOG(INFO, IP_RSMBL, "Creating LPM6 table on socket %i\n", socket);
snprintf(buf, sizeof(buf), "IP_RSMBL_LPM_%i", socket);
lpm6 = rte_lpm6_create(buf, socket, &lpm6_config);
if (lpm6 == NULL) {
RTE_LOG(ERR, IP_RSMBL, "Cannot create LPM table\n");
return -1;
}
socket_lpm6[socket] = lpm6;
}
}
return 0;
}
static void
queue_dump_stat(void)
{
uint32_t i, lcore;
const struct lcore_queue_conf *qconf;
for (lcore = 0; lcore < RTE_MAX_LCORE; lcore++) {
if (rte_lcore_is_enabled(lcore) == 0)
continue;
qconf = &lcore_queue_conf[lcore];
for (i = 0; i < qconf->n_rx_queue; i++) {
fprintf(stdout, " -- lcoreid=%u portid=%u "
"frag tbl stat:\n",
lcore, qconf->rx_queue_list[i].portid);
rte_ip_frag_table_statistics_dump(stdout,
qconf->rx_queue_list[i].frag_tbl);
fprintf(stdout, "TX bursts:\t%" PRIu64 "\n"
"TX packets _queued:\t%" PRIu64 "\n"
"TX packets dropped:\t%" PRIu64 "\n"
"TX packets send:\t%" PRIu64 "\n",
qconf->tx_stat.call,
qconf->tx_stat.queue,
qconf->tx_stat.drop,
qconf->tx_stat.send);
}
}
}
static void
signal_handler(int signum)
{
queue_dump_stat();
if (signum != SIGUSR1)
rte_exit(0, "received signal: %d, exiting\n", signum);
}
int
main(int argc, char **argv)
{
struct lcore_queue_conf *qconf;
struct rte_eth_dev_info dev_info;
struct rte_eth_txconf *txconf;
struct rx_queue *rxq;
int ret, socket;
unsigned nb_ports;
uint16_t queueid;
unsigned lcore_id = 0, rx_lcore_id = 0;
uint32_t n_tx_queue, nb_lcores;
uint16_t portid;
/* init EAL */
ret = rte_eal_init(argc, argv);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Invalid EAL parameters\n");
argc -= ret;
argv += ret;
/* parse application arguments (after the EAL ones) */
ret = parse_args(argc, argv);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Invalid IP reassembly parameters\n");
nb_ports = rte_eth_dev_count_avail();
if (nb_ports == 0)
rte_exit(EXIT_FAILURE, "No ports found!\n");
nb_lcores = rte_lcore_count();
/* initialize structures (mempools, lpm etc.) */
if (init_mem() < 0)
rte_panic("Cannot initialize memory structures!\n");
/* check if portmask has non-existent ports */
if (enabled_port_mask & ~(RTE_LEN2MASK(nb_ports, unsigned)))
rte_exit(EXIT_FAILURE, "Non-existent ports in portmask!\n");
/* initialize all ports */
RTE_ETH_FOREACH_DEV(portid) {
struct rte_eth_rxconf rxq_conf;
struct rte_eth_conf local_port_conf = port_conf;
/* skip ports that are not enabled */
if ((enabled_port_mask & (1 << portid)) == 0) {
printf("\nSkipping disabled port %d\n", portid);
continue;
}
qconf = &lcore_queue_conf[rx_lcore_id];
/* limit the frame size to the maximum supported by NIC */
ret = rte_eth_dev_info_get(portid, &dev_info);
if (ret != 0)
rte_exit(EXIT_FAILURE,
"Error during getting device (port %u) info: %s\n",
portid, strerror(-ret));
local_port_conf.rxmode.max_rx_pkt_len = RTE_MIN(
dev_info.max_rx_pktlen,
local_port_conf.rxmode.max_rx_pkt_len);
/* get the lcore_id for this port */
while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
qconf->n_rx_queue == (unsigned)rx_queue_per_lcore) {
rx_lcore_id++;
if (rx_lcore_id >= RTE_MAX_LCORE)
rte_exit(EXIT_FAILURE, "Not enough cores\n");
qconf = &lcore_queue_conf[rx_lcore_id];
}
socket = rte_lcore_to_socket_id(portid);
if (socket == SOCKET_ID_ANY)
socket = 0;
queueid = qconf->n_rx_queue;
rxq = &qconf->rx_queue_list[queueid];
rxq->portid = portid;
rxq->lpm = socket_lpm[socket];
rxq->lpm6 = socket_lpm6[socket];
ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd,
&nb_txd);
if (ret < 0)
rte_exit(EXIT_FAILURE,
"Cannot adjust number of descriptors: err=%d, port=%d\n",
ret, portid);
if (setup_queue_tbl(rxq, rx_lcore_id, queueid) < 0)
rte_exit(EXIT_FAILURE, "Failed to set up queue table\n");
qconf->n_rx_queue++;
/* init port */
printf("Initializing port %d ... ", portid );
fflush(stdout);
n_tx_queue = nb_lcores;
if (n_tx_queue > MAX_TX_QUEUE_PER_PORT)
n_tx_queue = MAX_TX_QUEUE_PER_PORT;
if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
local_port_conf.txmode.offloads |=
DEV_TX_OFFLOAD_MBUF_FAST_FREE;
local_port_conf.rx_adv_conf.rss_conf.rss_hf &=
dev_info.flow_type_rss_offloads;
if (local_port_conf.rx_adv_conf.rss_conf.rss_hf !=
port_conf.rx_adv_conf.rss_conf.rss_hf) {
printf("Port %u modified RSS hash function based on hardware support,"
"requested:%#"PRIx64" configured:%#"PRIx64"\n",
portid,
port_conf.rx_adv_conf.rss_conf.rss_hf,
local_port_conf.rx_adv_conf.rss_conf.rss_hf);
}
ret = rte_eth_dev_configure(portid, 1, (uint16_t)n_tx_queue,
&local_port_conf);
if (ret < 0) {
printf("\n");
rte_exit(EXIT_FAILURE, "Cannot configure device: "
"err=%d, port=%d\n",
ret, portid);
}
/* init one RX queue */
rxq_conf = dev_info.default_rxconf;
rxq_conf.offloads = local_port_conf.rxmode.offloads;
ret = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
socket, &rxq_conf,
rxq->pool);
if (ret < 0) {
printf("\n");
rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup: "
"err=%d, port=%d\n",
ret, portid);
}
ret = rte_eth_macaddr_get(portid, &ports_eth_addr[portid]);
if (ret < 0) {
printf("\n");
rte_exit(EXIT_FAILURE,
"rte_eth_macaddr_get: err=%d, port=%d\n",
ret, portid);
}
print_ethaddr(" Address:", &ports_eth_addr[portid]);
printf("\n");
/* init one TX queue per couple (lcore,port) */
queueid = 0;
for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
if (rte_lcore_is_enabled(lcore_id) == 0)
continue;
socket = (int) rte_lcore_to_socket_id(lcore_id);
printf("txq=%u,%d,%d ", lcore_id, queueid, socket);
fflush(stdout);
txconf = &dev_info.default_txconf;
txconf->offloads = local_port_conf.txmode.offloads;
ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
socket, txconf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, "
"port=%d\n", ret, portid);
qconf = &lcore_queue_conf[lcore_id];
qconf->tx_queue_id[portid] = queueid;
setup_port_tbl(qconf, lcore_id, socket, portid);
queueid++;
}
printf("\n");
}
printf("\n");
/* start ports */
RTE_ETH_FOREACH_DEV(portid) {
if ((enabled_port_mask & (1 << portid)) == 0) {
continue;
}
/* Start device */
ret = rte_eth_dev_start(portid);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_dev_start: err=%d, port=%d\n",
ret, portid);
ret = rte_eth_promiscuous_enable(portid);
if (ret != 0)
rte_exit(EXIT_FAILURE,
"rte_eth_promiscuous_enable: err=%s, port=%d\n",
rte_strerror(-ret), portid);
}
if (init_routing_table() < 0)
rte_exit(EXIT_FAILURE, "Cannot init routing table\n");
check_all_ports_link_status(enabled_port_mask);
signal(SIGUSR1, signal_handler);
signal(SIGTERM, signal_handler);
signal(SIGINT, signal_handler);
/* launch per-lcore init on every lcore */
rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);
RTE_LCORE_FOREACH_SLAVE(lcore_id) {
if (rte_eal_wait_lcore(lcore_id) < 0)
return -1;
}
return 0;
}