numam-dpdk/config/common_linuxapp

#   BSD LICENSE
#
#   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
#   All rights reserved.
#
#   Redistribution and use in source and binary forms, with or without
#   modification, are permitted provided that the following conditions
#   are met:
#
#     * Redistributions of source code must retain the above copyright
#       notice, this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright
#       notice, this list of conditions and the following disclaimer in
#       the documentation and/or other materials provided with the
#       distribution.
#     * Neither the name of Intel Corporation nor the names of its
#       contributors may be used to endorse or promote products derived
#       from this software without specific prior written permission.
#
#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#

#
# define executive environment
#
# CONFIG_RTE_EXEC_ENV can be linuxapp, bsdapp
#
CONFIG_RTE_EXEC_ENV="linuxapp"
CONFIG_RTE_EXEC_ENV_LINUXAPP=y

##
## machine can define specific variables or action for a specific board
## RTE_MACHINE can be:
## default  nothing specific
## native   current machine
## atm      Intel® Atom™ microarchitecture
## nhm      Intel® microarchitecture code name Nehalem
## wsm      Intel® microarchitecture code name Westmere
## snb      Intel® microarchitecture code name Sandy Bridge
## ivb      Intel® microarchitecture code name Ivy Bridge
##
## Note: if your compiler does not support the relevant -march options,
## it will be compiled with whatever latest processor the compiler supports!
##
#CONFIG_RTE_MACHINE="native"
#
##
## define the architecture we compile for.
## CONFIG_RTE_ARCH can be i686, x86_64, x86_64_32
##
#CONFIG_RTE_ARCH="x86_64"
#CONFIG_RTE_ARCH_X86_64=y
#
##
## The compiler we use.
## Can be gcc, icc or clang.
##
#CONFIG_RTE_TOOLCHAIN="gcc"
#CONFIG_RTE_TOOLCHAIN_GCC=y

#
# Use intrinsics or assembly code for key routines
#
CONFIG_RTE_FORCE_INTRINSICS=n

#
# Machine forces strict alignment constraints.
#
CONFIG_RTE_ARCH_STRICT_ALIGN=n

#
# Compile to share library
#
CONFIG_RTE_BUILD_SHARED_LIB=n

#
# Combine to one single library
#
CONFIG_RTE_BUILD_COMBINE_LIBS=n
CONFIG_RTE_LIBNAME="intel_dpdk"

#
# Compile Environment Abstraction Layer
#
CONFIG_RTE_LIBRTE_EAL=y
CONFIG_RTE_MAX_LCORE=128
CONFIG_RTE_MAX_NUMA_NODES=8
CONFIG_RTE_MAX_MEMSEG=256
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
CONFIG_RTE_LOG_LEVEL=8
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_LIBEAL_USE_HPET=n
CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=y
CONFIG_RTE_EAL_VFIO=y

#
# Special configurations in PCI Config Space for high performance
#
CONFIG_RTE_PCI_CONFIG=n
CONFIG_RTE_PCI_EXTENDED_TAG=""
CONFIG_RTE_PCI_MAX_READ_REQUEST_SIZE=0

#
# Compile Environment Abstraction Layer for linux
#
CONFIG_RTE_LIBRTE_EAL_LINUXAPP=y

#
# Compile Environment Abstraction Layer to support hotplug
#
CONFIG_RTE_LIBRTE_EAL_HOTPLUG=y

#
# Compile Environment Abstraction Layer to support Vmware TSC map
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y

#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_KVARGS=y

#
# Compile generic ethernet library
#
CONFIG_RTE_LIBRTE_ETHER=y
CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
CONFIG_RTE_MAX_ETHPORTS=32
CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y

#
# Support NIC bypass logic
#
CONFIG_RTE_NIC_BYPASS=n

#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n

#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y

#
# Compile burst-oriented I40E PMD driver
#
CONFIG_RTE_LIBRTE_I40E_PMD=y
CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
# interval up to 8160 us, aligned to 2 (or default value)
CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1

#
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y

#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1

#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
CONFIG_RTE_LIBRTE_ENIC_DEBUG=n

#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n

#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n

#
# Compile example software rings based PMD
#
CONFIG_RTE_LIBRTE_PMD_RING=y
CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16

#
# Compile software PMD backed by PCAP files
#
CONFIG_RTE_LIBRTE_PMD_PCAP=n

#
# Compile link bonding PMD library
#
CONFIG_RTE_LIBRTE_PMD_BOND=y
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n

#
# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
CONFIG_RTE_LIBRTE_PMD_AF_PACKET=y

#
# Compile Xen PMD
#
CONFIG_RTE_LIBRTE_PMD_XENVIRT=n

#
# Compile null PMD
#
CONFIG_RTE_LIBRTE_PMD_NULL=y

#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y

#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
CONFIG_RTE_LIBRTE_RING_DEBUG=n
CONFIG_RTE_RING_SPLIT_PROD_CONS=n
CONFIG_RTE_RING_PAUSE_REP_COUNT=0

#
# Compile librte_mempool
#
CONFIG_RTE_LIBRTE_MEMPOOL=y
CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n

#
# Compile librte_mbuf
#
CONFIG_RTE_LIBRTE_MBUF=y
CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
CONFIG_RTE_PKTMBUF_HEADROOM=128

#
# Compile librte_timer
#
CONFIG_RTE_LIBRTE_TIMER=y
CONFIG_RTE_LIBRTE_TIMER_DEBUG=n

#
# Compile librte_malloc
#
CONFIG_RTE_LIBRTE_MALLOC=y
CONFIG_RTE_LIBRTE_MALLOC_DEBUG=n
CONFIG_RTE_MALLOC_MEMZONE_SIZE=11M

#
# Compile librte_cfgfile
#
CONFIG_RTE_LIBRTE_CFGFILE=y

#
# Compile librte_cmdline
#
CONFIG_RTE_LIBRTE_CMDLINE=y
CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n

#
# Compile librte_hash
#
CONFIG_RTE_LIBRTE_HASH=y
CONFIG_RTE_LIBRTE_HASH_DEBUG=n

#
# Compile librte_jobstats
#
CONFIG_RTE_LIBRTE_JOBSTATS=y

#
# Compile librte_lpm
#
CONFIG_RTE_LIBRTE_LPM=y
CONFIG_RTE_LIBRTE_LPM_DEBUG=n

#
# Compile librte_acl
#
CONFIG_RTE_LIBRTE_ACL=y
CONFIG_RTE_LIBRTE_ACL_DEBUG=n

#
# Compile librte_power
#
CONFIG_RTE_LIBRTE_POWER=y
CONFIG_RTE_LIBRTE_POWER_DEBUG=n
CONFIG_RTE_MAX_LCORE_FREQS=64

#
# Compile librte_net
#
CONFIG_RTE_LIBRTE_NET=y

#
# Compile librte_ip_frag
#
CONFIG_RTE_LIBRTE_IP_FRAG=y
CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n

#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y

#
# Compile librte_sched
#
CONFIG_RTE_LIBRTE_SCHED=y
CONFIG_RTE_SCHED_RED=n
CONFIG_RTE_SCHED_COLLECT_STATS=n
CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
CONFIG_RTE_SCHED_PORT_N_GRINDERS=8

#
# Compile the distributor library
#
CONFIG_RTE_LIBRTE_DISTRIBUTOR=y

#
# Compile the reorder library
#
CONFIG_RTE_LIBRTE_REORDER=y

#
# Compile librte_port
#
CONFIG_RTE_LIBRTE_PORT=y
CONFIG_RTE_PORT_STATS_COLLECT=n

#
# Compile librte_table
#
CONFIG_RTE_LIBRTE_TABLE=y
CONFIG_RTE_TABLE_STATS_COLLECT=n

#
# Compile librte_pipeline
#
CONFIG_RTE_LIBRTE_PIPELINE=y
CONFIG_RTE_PIPELINE_STATS_COLLECT=n

#
# Compile librte_kni
#
CONFIG_RTE_LIBRTE_KNI=y
CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
CONFIG_RTE_KNI_KO_DEBUG=n
CONFIG_RTE_KNI_VHOST=n
CONFIG_RTE_KNI_VHOST_MAX_CACHE_SIZE=1024
CONFIG_RTE_KNI_VHOST_VNET_HDR_EN=n
CONFIG_RTE_KNI_VHOST_DEBUG_RX=n
CONFIG_RTE_KNI_VHOST_DEBUG_TX=n

#
# Compile vhost library
# fuse-devel is needed to run vhost-cuse.
# fuse-devel enables user space char driver development
# vhost-user is turned on by default.
#
CONFIG_RTE_LIBRTE_VHOST=n
CONFIG_RTE_LIBRTE_VHOST_USER=y
CONFIG_RTE_LIBRTE_VHOST_NUMA=n
CONFIG_RTE_LIBRTE_VHOST_DEBUG=n

#
#Compile Xen domain0 support
#
CONFIG_RTE_LIBRTE_XEN_DOM0=n

#
# Enable warning directives
#
CONFIG_RTE_INSECURE_FUNCTION_WARNING=n

#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y

#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD=y
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n