numam-dpdk/drivers/net/mlx5/mlx5_trigger.c

127 lines
3.6 KiB
C
Raw Normal View History

/*-
* BSD LICENSE
*
* Copyright 2015 6WIND S.A.
* Copyright 2015 Mellanox.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of 6WIND S.A. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* DPDK headers don't like -pedantic. */
#ifdef PEDANTIC
#pragma GCC diagnostic ignored "-Wpedantic"
#endif
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_interrupts.h>
#include <rte_alarm.h>
#ifdef PEDANTIC
#pragma GCC diagnostic error "-Wpedantic"
#endif
#include "mlx5.h"
#include "mlx5_rxtx.h"
#include "mlx5_utils.h"
/**
* DPDK callback to start the device.
*
* Simulate device start by attaching all configured flows.
*
* @param dev
* Pointer to Ethernet device structure.
*
* @return
* 0 on success, negative errno value on failure.
*/
int
mlx5_dev_start(struct rte_eth_dev *dev)
{
struct priv *priv = dev->data->dev_private;
mlx5: refactor Rx code for the new verbs RSS API The new Verbs RSS API is lower-level than the previous one and much more flexible but requires RX queues to use Work Queues (WQs) internally instead of Queue Pairs (QPs), which are grouped in an indirection table used by a new kind of hash RX QPs. Hash RX QPs and the indirection table together replace the parent RSS QP while WQs are mostly similar to child QPs. RSS hash key is not configurable yet. Summary of changes: - Individual DPDK RX queues do not store flow properties anymore, this info is now part of the hash RX queues. - All functions affecting the parent queue when RSS is enabled or the basic queues otherwise are modified to affect hash RX queues instead. - Hash RX queues are also used when a single DPDK RX queue is configured (no RSS) to remove that special case. - Hash RX queues and indirection table are created/destroyed when device is started/stopped in addition to create/destroy flows. - Contrary to QPs, WQs are moved to the "ready" state before posting RX buffers, otherwise they are ignored. - Resource domain information is added to WQs for better performance. - CQs are not resized anymore when switching between non-SG and SG modes as it does not work correctly with WQs. Use the largest possible size instead, since CQ size does not have to be the same as the number of elements in the RX queue. This also applies to the maximum number of outstanding WRs in a WQ (max_recv_wr). Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com> Signed-off-by: Olga Shern <olgas@mellanox.com> Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Signed-off-by: Or Ami <ora@mellanox.com> Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
2015-10-30 18:55:06 +00:00
int err;
if (mlx5_is_secondary())
return -E_RTE_SECONDARY;
priv_lock(priv);
if (priv->started) {
priv_unlock(priv);
return 0;
}
mlx5: refactor Rx code for the new verbs RSS API The new Verbs RSS API is lower-level than the previous one and much more flexible but requires RX queues to use Work Queues (WQs) internally instead of Queue Pairs (QPs), which are grouped in an indirection table used by a new kind of hash RX QPs. Hash RX QPs and the indirection table together replace the parent RSS QP while WQs are mostly similar to child QPs. RSS hash key is not configurable yet. Summary of changes: - Individual DPDK RX queues do not store flow properties anymore, this info is now part of the hash RX queues. - All functions affecting the parent queue when RSS is enabled or the basic queues otherwise are modified to affect hash RX queues instead. - Hash RX queues are also used when a single DPDK RX queue is configured (no RSS) to remove that special case. - Hash RX queues and indirection table are created/destroyed when device is started/stopped in addition to create/destroy flows. - Contrary to QPs, WQs are moved to the "ready" state before posting RX buffers, otherwise they are ignored. - Resource domain information is added to WQs for better performance. - CQs are not resized anymore when switching between non-SG and SG modes as it does not work correctly with WQs. Use the largest possible size instead, since CQ size does not have to be the same as the number of elements in the RX queue. This also applies to the maximum number of outstanding WRs in a WQ (max_recv_wr). Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com> Signed-off-by: Olga Shern <olgas@mellanox.com> Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Signed-off-by: Or Ami <ora@mellanox.com> Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
2015-10-30 18:55:06 +00:00
DEBUG("%p: allocating and configuring hash RX queues", (void *)dev);
err = priv_create_hash_rxqs(priv);
if (!err)
err = priv_rehash_flows(priv);
mlx5: refactor Rx code for the new verbs RSS API The new Verbs RSS API is lower-level than the previous one and much more flexible but requires RX queues to use Work Queues (WQs) internally instead of Queue Pairs (QPs), which are grouped in an indirection table used by a new kind of hash RX QPs. Hash RX QPs and the indirection table together replace the parent RSS QP while WQs are mostly similar to child QPs. RSS hash key is not configurable yet. Summary of changes: - Individual DPDK RX queues do not store flow properties anymore, this info is now part of the hash RX queues. - All functions affecting the parent queue when RSS is enabled or the basic queues otherwise are modified to affect hash RX queues instead. - Hash RX queues are also used when a single DPDK RX queue is configured (no RSS) to remove that special case. - Hash RX queues and indirection table are created/destroyed when device is started/stopped in addition to create/destroy flows. - Contrary to QPs, WQs are moved to the "ready" state before posting RX buffers, otherwise they are ignored. - Resource domain information is added to WQs for better performance. - CQs are not resized anymore when switching between non-SG and SG modes as it does not work correctly with WQs. Use the largest possible size instead, since CQ size does not have to be the same as the number of elements in the RX queue. This also applies to the maximum number of outstanding WRs in a WQ (max_recv_wr). Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com> Signed-off-by: Olga Shern <olgas@mellanox.com> Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Signed-off-by: Or Ami <ora@mellanox.com> Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
2015-10-30 18:55:06 +00:00
if (!err)
priv->started = 1;
else {
ERROR("%p: an error occurred while configuring hash RX queues:"
" %s",
(void *)priv, strerror(err));
/* Rollback. */
priv_special_flow_disable_all(priv);
mlx5: refactor Rx code for the new verbs RSS API The new Verbs RSS API is lower-level than the previous one and much more flexible but requires RX queues to use Work Queues (WQs) internally instead of Queue Pairs (QPs), which are grouped in an indirection table used by a new kind of hash RX QPs. Hash RX QPs and the indirection table together replace the parent RSS QP while WQs are mostly similar to child QPs. RSS hash key is not configurable yet. Summary of changes: - Individual DPDK RX queues do not store flow properties anymore, this info is now part of the hash RX queues. - All functions affecting the parent queue when RSS is enabled or the basic queues otherwise are modified to affect hash RX queues instead. - Hash RX queues are also used when a single DPDK RX queue is configured (no RSS) to remove that special case. - Hash RX queues and indirection table are created/destroyed when device is started/stopped in addition to create/destroy flows. - Contrary to QPs, WQs are moved to the "ready" state before posting RX buffers, otherwise they are ignored. - Resource domain information is added to WQs for better performance. - CQs are not resized anymore when switching between non-SG and SG modes as it does not work correctly with WQs. Use the largest possible size instead, since CQ size does not have to be the same as the number of elements in the RX queue. This also applies to the maximum number of outstanding WRs in a WQ (max_recv_wr). Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com> Signed-off-by: Olga Shern <olgas@mellanox.com> Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Signed-off-by: Or Ami <ora@mellanox.com> Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
2015-10-30 18:55:06 +00:00
priv_mac_addrs_disable(priv);
priv_destroy_hash_rxqs(priv);
}
if (dev->data->dev_conf.fdir_conf.mode != RTE_FDIR_MODE_NONE)
priv_fdir_enable(priv);
priv_dev_interrupt_handler_install(priv, dev);
priv_unlock(priv);
mlx5: refactor Rx code for the new verbs RSS API The new Verbs RSS API is lower-level than the previous one and much more flexible but requires RX queues to use Work Queues (WQs) internally instead of Queue Pairs (QPs), which are grouped in an indirection table used by a new kind of hash RX QPs. Hash RX QPs and the indirection table together replace the parent RSS QP while WQs are mostly similar to child QPs. RSS hash key is not configurable yet. Summary of changes: - Individual DPDK RX queues do not store flow properties anymore, this info is now part of the hash RX queues. - All functions affecting the parent queue when RSS is enabled or the basic queues otherwise are modified to affect hash RX queues instead. - Hash RX queues are also used when a single DPDK RX queue is configured (no RSS) to remove that special case. - Hash RX queues and indirection table are created/destroyed when device is started/stopped in addition to create/destroy flows. - Contrary to QPs, WQs are moved to the "ready" state before posting RX buffers, otherwise they are ignored. - Resource domain information is added to WQs for better performance. - CQs are not resized anymore when switching between non-SG and SG modes as it does not work correctly with WQs. Use the largest possible size instead, since CQ size does not have to be the same as the number of elements in the RX queue. This also applies to the maximum number of outstanding WRs in a WQ (max_recv_wr). Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com> Signed-off-by: Olga Shern <olgas@mellanox.com> Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Signed-off-by: Or Ami <ora@mellanox.com> Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
2015-10-30 18:55:06 +00:00
return -err;
}
/**
* DPDK callback to stop the device.
*
* Simulate device stop by detaching all configured flows.
*
* @param dev
* Pointer to Ethernet device structure.
*/
void
mlx5_dev_stop(struct rte_eth_dev *dev)
{
struct priv *priv = dev->data->dev_private;
if (mlx5_is_secondary())
return;
priv_lock(priv);
if (!priv->started) {
priv_unlock(priv);
return;
}
mlx5: refactor Rx code for the new verbs RSS API The new Verbs RSS API is lower-level than the previous one and much more flexible but requires RX queues to use Work Queues (WQs) internally instead of Queue Pairs (QPs), which are grouped in an indirection table used by a new kind of hash RX QPs. Hash RX QPs and the indirection table together replace the parent RSS QP while WQs are mostly similar to child QPs. RSS hash key is not configurable yet. Summary of changes: - Individual DPDK RX queues do not store flow properties anymore, this info is now part of the hash RX queues. - All functions affecting the parent queue when RSS is enabled or the basic queues otherwise are modified to affect hash RX queues instead. - Hash RX queues are also used when a single DPDK RX queue is configured (no RSS) to remove that special case. - Hash RX queues and indirection table are created/destroyed when device is started/stopped in addition to create/destroy flows. - Contrary to QPs, WQs are moved to the "ready" state before posting RX buffers, otherwise they are ignored. - Resource domain information is added to WQs for better performance. - CQs are not resized anymore when switching between non-SG and SG modes as it does not work correctly with WQs. Use the largest possible size instead, since CQ size does not have to be the same as the number of elements in the RX queue. This also applies to the maximum number of outstanding WRs in a WQ (max_recv_wr). Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com> Signed-off-by: Olga Shern <olgas@mellanox.com> Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Signed-off-by: Or Ami <ora@mellanox.com> Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
2015-10-30 18:55:06 +00:00
DEBUG("%p: cleaning up and destroying hash RX queues", (void *)dev);
priv_special_flow_disable_all(priv);
mlx5: refactor Rx code for the new verbs RSS API The new Verbs RSS API is lower-level than the previous one and much more flexible but requires RX queues to use Work Queues (WQs) internally instead of Queue Pairs (QPs), which are grouped in an indirection table used by a new kind of hash RX QPs. Hash RX QPs and the indirection table together replace the parent RSS QP while WQs are mostly similar to child QPs. RSS hash key is not configurable yet. Summary of changes: - Individual DPDK RX queues do not store flow properties anymore, this info is now part of the hash RX queues. - All functions affecting the parent queue when RSS is enabled or the basic queues otherwise are modified to affect hash RX queues instead. - Hash RX queues are also used when a single DPDK RX queue is configured (no RSS) to remove that special case. - Hash RX queues and indirection table are created/destroyed when device is started/stopped in addition to create/destroy flows. - Contrary to QPs, WQs are moved to the "ready" state before posting RX buffers, otherwise they are ignored. - Resource domain information is added to WQs for better performance. - CQs are not resized anymore when switching between non-SG and SG modes as it does not work correctly with WQs. Use the largest possible size instead, since CQ size does not have to be the same as the number of elements in the RX queue. This also applies to the maximum number of outstanding WRs in a WQ (max_recv_wr). Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com> Signed-off-by: Olga Shern <olgas@mellanox.com> Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Signed-off-by: Or Ami <ora@mellanox.com> Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
2015-10-30 18:55:06 +00:00
priv_mac_addrs_disable(priv);
priv_destroy_hash_rxqs(priv);
priv_fdir_disable(priv);
priv_dev_interrupt_handler_uninstall(priv, dev);
priv->started = 0;
priv_unlock(priv);
}