d/numam-dpdk
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
d2fd16c8b0
numam-dpdk/app/test/meson.build

504 lines
13 KiB
Meson
Raw Normal View History

test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
# SPDX-License-Identifier: BSD-3-Clause
# Copyright(c) 2017 Intel Corporation
test: skip meson dependency checks if not required Don't need to check dependencies if test apps will not be built anyway. Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Aaron Conole <aconole@redhat.com> Acked-by: Luca Boccassi <bluca@debian.org>
2019-05-30 12:38:36 +00:00
if not get_option('tests')
subdir_done()
endif
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
test_sources = files('commands.c',
'packet_burst_generator.c',
'test.c',
'test_acl.c',
'test_alarm.c',
'test_atomic.c',
test: build more test cases with meson Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Reviewed-by: Luca Boccassi <bluca@debian.org>
2018-01-30 14:41:26 +00:00
'test_barrier.c',
test/bitops: add bit operations test case Add test cases for setting bit, clearing bit, testing and setting bit, testing and clearing bit operation. Signed-off-by: Joyce Kong <joyce.kong@arm.com> Reviewed-by: Gavin Hu <gavin.hu@arm.com> Reviewed-by: Phil Yang <phil.yang@arm.com>
2020-04-27 07:58:52 +00:00
'test_bitops.c',
test/bpf: introduce functional test Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
2018-05-10 10:23:10 +00:00
'test_bpf.c',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'test_byteorder.c',
'test_cmdline.c',
'test_cmdline_cirbuf.c',
'test_cmdline_etheraddr.c',
'test_cmdline_ipaddr.c',
'test_cmdline_lib.c',
'test_cmdline_num.c',
'test_cmdline_portlist.c',
'test_cmdline_string.c',
'test_common.c',
'test_cpuflags.c',
'test_crc.c',
test: build more test cases with meson This commit adds most of the remaining tests to the meson build. They can be run using test binary as normal, or via "ninja test". Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
2017-12-20 12:06:21 +00:00
'test_cryptodev.c',
test/crypto: add RSA and Mod tests Test application include test case for : - RSA encrypt, decrypt, sign and verify - Modular Inversion and Exponentiation Test cases uses predefined test vectors. Signed-off-by: Sunila Sahu <sunila.sahu@caviumnetworks.com> Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com> Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com> Signed-off-by: Umesh Kartha <umesh.kartha@caviumnetworks.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2018-07-10 16:01:30 +00:00
'test_cryptodev_asym.c',
test: build more test cases with meson This commit adds most of the remaining tests to the meson build. They can be run using test binary as normal, or via "ninja test". Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
2017-12-20 12:06:21 +00:00
'test_cryptodev_blockcipher.c',
test/crypto: add PDCP C-Plane encap cases PDCP control plane can support 5 bit and 12 bit sequence number. This patch add test cases and test vectors for all supported algo combinations of cipher+integrity (NULL+NULL, NULL+AES, NULL+SNOW, NULL+ZUC, AES+NULL, AES+SNOW, AES+AES, AES+ZUC, SNOW+NULL, SNOW+AES, SNOW+SNOW, SNOW+ZUC, ZUC+NULL, ZUC+AES, ZUC+SNOW, ZUC+ZUC). The test cases are added in DPAA_SEC and DPAA2_SEC test suite as a reference. Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com> Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com> Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
2019-09-30 19:27:40 +00:00
'test_cryptodev_security_pdcp.c',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'test_cycles.c',
'test_debug.c',
'test_distributor.c',
'test_distributor_perf.c',
'test_eal_flags.c',
'test_eal_fs.c',
'test_efd.c',
'test_efd_perf.c',
'test_errno.c',
test/event: add adapter tests to meson build Add tests for event eth Rx, crypto and timer adapters to meson build Signed-off-by: Nikhil Rao <nikhil.rao@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2018-09-27 05:46:15 +00:00
'test_event_crypto_adapter.c',
'test_event_eth_rx_adapter.c',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'test_event_ring.c',
test/event: add adapter tests to meson build Add tests for event eth Rx, crypto and timer adapters to meson build Signed-off-by: Nikhil Rao <nikhil.rao@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2018-09-27 05:46:15 +00:00
'test_event_timer_adapter.c',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'test_eventdev.c',
test/mem: add external mem autotest to meson The 'external_mem_autotest' was defined in the meson build, but the actual source file was not being compiled by meson. Fixes: b270daa43b3d ("test: support external memory") Cc: stable@dpdk.org Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
2018-12-05 16:25:48 +00:00
'test_external_mem.c',
test/fbarray: add to meson Currently, fbarray autotest is only built by make, but is missing from meson build files. Fixes: 7985860c18af ("test/fbarray: add autotests") Cc: stable@dpdk.org Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2018-12-05 16:26:00 +00:00
'test_fbarray.c',
test/fib: add autotests Functional tests for the new FIB library. Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
2019-11-01 15:21:42 +00:00
'test_fib.c',
test/fib: add performance autotests Performance tests for the new FIB library. Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
2019-11-01 15:21:44 +00:00
'test_fib_perf.c',
test/fib: add IPv6 autotests Functional IPv6 tests for the FIB library. Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
2019-11-01 15:21:43 +00:00
'test_fib6.c',
test/fib: add IPv6 performance autotests Performance IPv6 tests for the FIB library. Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
2019-11-01 15:21:45 +00:00
'test_fib6_perf.c',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'test_func_reentrancy.c',
test: build more test cases with meson This commit adds most of the remaining tests to the meson build. They can be run using test binary as normal, or via "ninja test". Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
2017-12-20 12:06:21 +00:00
'test_flow_classify.c',
test/graph: add functional tests Adding the unit test to test the functionality of node and graph APIs. Testing includes registering a node, cloning a node, creating a graph, perform graph walk, collecting stats and all node and graph debug APIs. example command to test: echo "graph_autotest" | sudo ./build/app/test/dpdk-test -c 0x30 Signed-off-by: Kiran Kumar K <kirankumark@marvell.com> Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
2020-04-11 14:14:12 +00:00
'test_graph.c',
test/graph: add performance tests Add unit test framework to create and test performance of various graph models. example command to test: echo "graph_perf_autotest" | sudo ./build/app/test/dpdk-test -c 0x30 Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com> Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
2020-04-11 14:14:13 +00:00
'test_graph_perf.c',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'test_hash.c',
'test_hash_functions.c',
'test_hash_multiwriter.c',
test/hash: add missing file in meson build The test_hash_readwrite.c was not in the meson.build file. This commit adds the missing test into the file. Fixes: 0eb3726ebcf1 ("test/hash: add test for read/write concurrency") Cc: stable@dpdk.org Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2018-09-28 14:11:08 +00:00
'test_hash_readwrite.c',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'test_hash_perf.c',
test/hash: move lock-free tests to perf tests Move reader writer lock free tests to performance tests. Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
2020-02-03 19:49:11 +00:00
'test_hash_readwrite_lf_perf.c',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'test_interrupts.c',
test/ipfrag: add unit test case Initial IP fragmentation unit test. Signed-off-by: Aaron Conole <aconole@redhat.com> Tested-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com> Reviewed-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
2020-04-20 19:25:23 +00:00
'test_ipfrag.c',
test/ipsec: introduce functional test Create functional test for librte_ipsec. Note that the test requires null crypto pmd to pass successfully. Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com> Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Declan Doherty <declan.doherty@intel.com> Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
2019-01-10 21:06:33 +00:00
'test_ipsec.c',
test/ipsec: add SAD autotests add unittests for ipsec SAD library Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com> Acked-by: Akhil Goyal <akhil.goyal@nxp.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2019-10-21 14:35:45 +00:00
'test_ipsec_sad.c',
test/ipsec: add performance cases Add new test-case to measure performance of IPsec data-path functions. Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com> Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2020-04-23 15:25:04 +00:00
'test_ipsec_perf.c',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'test_kni.c',
'test_kvargs.c',
eal: register non-EAL threads as lcores DPDK allows calling some part of its API from a non-EAL thread but this has some limitations. OVS (and other applications) has its own thread management but still want to avoid such limitations by hacking RTE_PER_LCORE(_lcore_id) and faking EAL threads potentially unknown of some DPDK component. Introduce a new API to register non-EAL thread and associate them to a free lcore with a new NON_EAL role. This role denotes lcores that do not run DPDK mainloop and as such prevents use of rte_eal_wait_lcore() and consorts. Multiprocess is not supported as the need for cohabitation with this new feature is unclear at the moment. Signed-off-by: David Marchand <david.marchand@redhat.com> Acked-by: Andrew Rybchenko <arybchenko@solarflare.com> Acked-by: Thomas Monjalon <thomas@monjalon.net> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2020-07-06 20:52:30 +00:00
'test_lcores.c',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'test_logs.c',
'test_lpm.c',
'test_lpm6.c',
'test_lpm6_perf.c',
'test_lpm_perf.c',
'test_malloc.c',
'test_mbuf.c',
test: build more test cases with meson This commit adds most of the remaining tests to the meson build. They can be run using test binary as normal, or via "ninja test". Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
2017-12-20 12:06:21 +00:00
'test_member.c',
'test_member_perf.c',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'test_memcpy.c',
'test_memcpy_perf.c',
'test_memory.c',
'test_mempool.c',
'test_mempool_perf.c',
'test_memzone.c',
'test_meter.c',
test/metrics: add unit tests for metrics library Unit testcases are added for metrics library Added metrics unit test to autotest list Updated meson build file Updated MAINTAINERSHIP for metrics unit test Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com> Reviewed-by: Reshma Pattan <reshma.pattan@intel.com> Reviewed-by: Remy Horton <remy.horton@intel.com> Acked-by: Remy Horton <remy.horton@intel.com>
2018-10-08 13:01:27 +00:00
'test_metrics.c',
test/mcslock: add MCS queued lock unit test Unit test and perf test for MCS queued lock. Signed-off-by: Phil Yang <phil.yang@arm.com> Reviewed-by: Gavin Hu <gavin.hu@arm.com> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
2019-07-05 10:27:08 +00:00
'test_mcslock.c',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'test_mp_secondary.c',
'test_per_lcore.c',
'test_pmd_perf.c',
'test_power.c',
test/power: remove prefix ACPI This patch removes prefix _acpi from power UT function/test names, and renames file test_power_acpi_cpufreq.c -> app/test/test_power_cpufreq.c. Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
2019-04-03 10:32:54 +00:00
'test_power_cpufreq.c',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'test_power_kvm_vm.c',
'test_prefetch.c',
eal: replace libc-based random generation with LFSR This commit replaces rte_rand()'s use of lrand48() with a DPDK-native combined Linear Feedback Shift Register (LFSR) (also known as Tausworthe) pseudo-random number generator. This generator is faster and produces better-quality random numbers than the linear congruential generator (LCG) of lib's lrand48(). The implementation, as opposed to lrand48(), is multi-thread safe in regards to concurrent rte_rand() calls from different lcore threads. A LCG is still used, but only to seed the five per-lcore LFSR sequences. In addition, this patch also addresses the issue of the legacy implementation only producing 62 bits of pseudo randomness, while the API requires all 64 bits to be random. This pseudo-random number generator is not cryptographically secure - just like lrand48(). Bugzilla ID: 114 Bugzilla ID: 276 Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2019-06-28 09:01:20 +00:00
'test_rand_perf.c',
test: add rawdev autotest to meson the test_rawdev.c file was missing from the meson.build file, and the test case from the list of test commands. Fixes: 55ca1b0f2151 ("raw/skeleton: add test cases") Cc: stable@dpdk.org Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
2019-07-02 09:56:06 +00:00
'test_rawdev.c',
test/rcu: add API and functional tests Add API positive/negative test cases, functional tests and performance tests. Signed-off-by: Malvika Gupta <malvika.gupta@arm.com> Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com> Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com> Reviewed-by: Gavin Hu <gavin.hu@arm.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2019-05-01 03:54:17 +00:00
'test_rcu_qsbr.c',
'test_rcu_qsbr_perf.c',
test: build more test cases with meson Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Reviewed-by: Luca Boccassi <bluca@debian.org>
2018-01-30 14:41:26 +00:00
'test_reciprocal_division.c',
'test_reciprocal_division_perf.c',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'test_red.c',
'test_reorder.c',
test/rib: add autotests Functional tests for the new RIB library. Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
2019-11-01 15:21:35 +00:00
'test_rib.c',
test/rib: add IPv6 autotests Functional tests for RIB6. Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
2019-11-01 15:21:37 +00:00
'test_rib6.c',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'test_ring.c',
test/ring: add contention stress test Introduce stress test for ring enqueue/dequeue operations. Performs the following pattern on each slave worker: dequeue/read-write data from the dequeued objects/enqueue. Serves as both functional and performance test of ring enqueue/dequeue operations under high contention (for both over committed and non-over committed scenarios). Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
2020-04-20 12:28:22 +00:00
'test_ring_mpmc_stress.c',
test/ring: add contention stress test for HTS ring Introduce new test case to test HTS ring mode under contention. Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
2020-04-20 12:28:27 +00:00
'test_ring_hts_stress.c',
test/ring: rename stress test for MT peek API Rename test_ring_peek_stress to test_ring_mt_peek_stress to keep same naming conventions for ST and MT test cases. Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
2020-07-02 14:10:27 +00:00
'test_ring_mt_peek_stress.c',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'test_ring_perf.c',
test/ring: add contention stress test for RTS ring Introduce new test case to test RTS ring mode under contention. Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
2020-04-20 12:28:25 +00:00
'test_ring_rts_stress.c',
test/ring: add stress test for ST peek API Introduce new test case to test ST peek API. Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
2020-07-02 14:10:26 +00:00
'test_ring_st_peek_stress.c',
test/ring: add contention stress test Introduce stress test for ring enqueue/dequeue operations. Performs the following pattern on each slave worker: dequeue/read-write data from the dequeued objects/enqueue. Serves as both functional and performance test of ring enqueue/dequeue operations under high contention (for both over committed and non-over committed scenarios). Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
2020-04-20 12:28:22 +00:00
'test_ring_stress.c',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'test_rwlock.c',
'test_sched.c',
test/security: introduce security lib tests This patch introduces set of unit tests of librte_security API functions. Tests are added to dpdk-test application and can be run with "security_autotest" runtime command. This is the first patch in the series of patches as adding all test cases for all API functions in a single patch would make it unreadable. This patch defines structure of the file and necessary test framework initialization. It also contains first subset of unit tests for rte_security_session_create API function. Structure of the tests file is following: - macros for making tests more readable; - mockup structures and functions for rte_security_ops; - test suite and test cases setup and teardown functions; - tests functions; - declaration of testcases. Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com> Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
2020-04-09 17:24:54 +00:00
'test_security.c',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'test_service_cores.c',
'test_spinlock.c',
test/stack: check stack API stack_autotest performs positive and negative testing of the stack API, and exercises the push and pop datapath functions with all available lcores. Signed-off-by: Gage Eads <gage.eads@intel.com> Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
2019-04-03 23:20:15 +00:00
'test_stack.c',
test/stack: check stack performance stack_perf_autotest tests the following with one lcore: - Cycles to attempt to pop an empty stack - Cycles to push then pop a single object - Cycles to push then pop a burst of 32 objects It also tests the cycles to push then pop a burst of 8 and 32 objects with the following lcore combinations (if possible): - Two hyperthreads - Two physical cores - Two physical cores on separate NUMA nodes - All available lcores Signed-off-by: Gage Eads <gage.eads@intel.com> Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
2019-04-03 23:20:16 +00:00
'test_stack_perf.c',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'test_string_fns.c',
'test_table.c',
'test_table_acl.c',
'test_table_combined.c',
'test_table_pipeline.c',
'test_table_ports.c',
'test_table_tables.c',
'test_tailq.c',
'test_thash.c',
'test_timer.c',
'test_timer_perf.c',
'test_timer_racecond.c',
test/timer: exercise new APIs in secondary process This commit adds an autotest which exercises new timer reset/stop APIs in a secondary process. Timers are created, and sometimes stopped, in the secondary process, and their expiration is checked for and handled in the primary process. Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
2019-04-18 21:00:04 +00:00
'test_timer_secondary.c',
test/ticketlock: add test cases Add test cases for ticket lock, recursive ticket lock, and ticket lock performance. Signed-off-by: Joyce Kong <joyce.kong@arm.com> Reviewed-by: Gavin Hu <gavin.hu@arm.com> Reviewed-by: Phil Yang <phil.yang@arm.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2019-03-25 11:11:09 +00:00
'test_ticketlock.c',
test/trace: add functional test cases Example commands to run UT and check the traces with babeltrace viewer. - Delete the existing /root/dpdk-traces/ directory if needed. > sudo rm -rf /root/dpdk-traces/ - Start the dpdk-test > sudo ./build/app/test/dpdk-test -c 0x3 - --trace=.* - Run trace_autotest > trace_autotest - View the traces with babletrace viewer. > sudo babeltrace /root/dpdk-traces/ Signed-off-by: Sunil Kumar Kori <skori@marvell.com> Acked-by: David Marchand <david.marchand@redhat.com>
2020-04-22 19:03:43 +00:00
'test_trace.c',
'test_trace_register.c',
test/trace: add performance test cases This test case shall be used to measure the trace overhead. Example command to run the performance test case. echo "trace_perf_autotest" | ./build/app/test/dpdk-test -c 0x3 --trace=.* Signed-off-by: Jerin Jacob <jerinj@marvell.com> Acked-by: David Marchand <david.marchand@redhat.com>
2020-04-22 19:03:44 +00:00
'test_trace_perf.c',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'test_version.c',
'virtual_pmd.c'
)
test_deps = ['acl',
test/bonding: allow disabling driver The autotest application build was partially enabled for building with the net/bond driver disabled, but a number of items were missed, leading to build errors when the driver was disabled, e.g. by simply doing "-Ddisable_drivers=net/*" when calling meson. ../app/test/test_link_bonding.c:25:10: fatal error: rte_eth_bond.h: \ No such file or directory With this fix in place, it's possible to build DPDK with meson with all non-bus, non-mempool drivers disabled i.e. using meson option -Ddisable_drivers=baseband/*,compress/*,crypto/*,event/*,net/*,raw/*,vdpa/* Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com> Tested-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
2020-05-01 15:05:49 +00:00
'bus_pci',
'bus_vdev',
test/bitrate: add unit tests for bitrate library Unit Test Cases for BitRate library. Signed-off-by: Naga Suresh Somarowthu <naga.sureshx.somarowthu@intel.com> Reviewed-by: Reshma Pattan <reshma.pattan@intel.com> Reviewed-by: Remy Horton <remy.horton@intel.com>
2018-10-08 12:12:45 +00:00
'bitratestats',
test/bpf: introduce functional test Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
2018-05-10 10:23:10 +00:00
'bpf',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'cfgfile',
'cmdline',
'cryptodev',
'distributor',
'efd',
'ethdev',
'eventdev',
test/fib: add autotests Functional tests for the new FIB library. Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
2019-11-01 15:21:42 +00:00
'fib',
test: build more test cases with meson This commit adds most of the remaining tests to the meson build. They can be run using test binary as normal, or via "ninja test". Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
2017-12-20 12:06:21 +00:00
'flow_classify',
test/graph: add functional tests Adding the unit test to test the functionality of node and graph APIs. Testing includes registering a node, cloning a node, creating a graph, perform graph walk, collecting stats and all node and graph debug APIs. example command to test: echo "graph_autotest" | sudo ./build/app/test/dpdk-test -c 0x30 Signed-off-by: Kiran Kumar K <kirankumark@marvell.com> Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
2020-04-11 14:14:12 +00:00
'graph',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'hash',
test/ipsec: introduce functional test Create functional test for librte_ipsec. Note that the test requires null crypto pmd to pass successfully. Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com> Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com> Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Declan Doherty <declan.doherty@intel.com> Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
2019-01-10 21:06:33 +00:00
'ipsec',
test/latency: add unit tests for latencystats library Unit Test Cases added for latencystats library. Signed-off-by: Naga Suresh Somarowthu <naga.sureshx.somarowthu@intel.com> Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
2018-10-08 12:12:46 +00:00
'latencystats',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'lpm',
test: build more test cases with meson This commit adds most of the remaining tests to the meson build. They can be run using test binary as normal, or via "ninja test". Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
2017-12-20 12:06:21 +00:00
'member',
test/metrics: add unit tests for metrics library Unit testcases are added for metrics library Added metrics unit test to autotest list Updated meson build file Updated MAINTAINERSHIP for metrics unit test Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com> Reviewed-by: Reshma Pattan <reshma.pattan@intel.com> Reviewed-by: Remy Horton <remy.horton@intel.com> Acked-by: Remy Horton <remy.horton@intel.com>
2018-10-08 13:01:27 +00:00
'metrics',
node: add logging and null node Add log infra for node specific logging. Also, add null rte_node that just ignores all the objects directed to it. Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com> Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
2020-04-11 14:14:14 +00:00
'node',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'pipeline',
'port',
test: add rawdev autotest to meson the test_rawdev.c file was missing from the meson.build file, and the test case from the list of test commands. Fixes: 55ca1b0f2151 ("raw/skeleton: add test cases") Cc: stable@dpdk.org Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
2019-07-02 09:56:06 +00:00
'rawdev',
test/rcu: add API and functional tests Add API positive/negative test cases, functional tests and performance tests. Signed-off-by: Malvika Gupta <malvika.gupta@arm.com> Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com> Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com> Reviewed-by: Gavin Hu <gavin.hu@arm.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2019-05-01 03:54:17 +00:00
'rcu',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'reorder',
test/rib: add autotests Functional tests for the new RIB library. Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
2019-11-01 15:21:35 +00:00
'rib',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'ring',
test/security: introduce security lib tests This patch introduces set of unit tests of librte_security API functions. Tests are added to dpdk-test application and can be run with "security_autotest" runtime command. This is the first patch in the series of patches as adding all test cases for all API functions in a single patch would make it unreadable. This patch defines structure of the file and necessary test framework initialization. It also contains first subset of unit tests for rte_security_session_create API function. Structure of the tests file is following: - macros for making tests more readable; - mockup structures and functions for rte_security_ops; - test suite and test cases setup and teardown functions; - tests functions; - declaration of testcases. Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com> Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
2020-04-09 17:24:54 +00:00
'security',
test/stack: check stack API stack_autotest performs positive and negative testing of the stack API, and exercises the push and pop datapath functions with all available lcores. Signed-off-by: Gage Eads <gage.eads@intel.com> Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
2019-04-03 23:20:15 +00:00
'stack',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
'timer'
]
test: allow no-huge mode for fast-tests In environments where hugepage are not available, such as containers, many cases in fast-tests suite should also run if no-huge EAL option is used. Flag is appended to each case in fast-tests suite to indicate whether it lives with no-huge mode. With the flag, fast-tests suite can be generated based on detected hugepage availability of building environment. All cases will be valid if hugepage is available, whereas only applicable cases will be added if environment has no hugepage support. Suggested-by: Aaron Conole <aconole@redhat.com> Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com> Reviewed-by: Gavin Hu <gavin.hu@arm.com> Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David Marchand <david.marchand@redhat.com>
2020-03-23 19:59:24 +00:00
# Each test is marked with flag true/false
# to indicate whether it can run in no-huge mode.
fast_tests = [
['acl_autotest', true],
['alarm_autotest', false],
['atomic_autotest', false],
test/bitops: add bit operations test case Add test cases for setting bit, clearing bit, testing and setting bit, testing and clearing bit operation. Signed-off-by: Joyce Kong <joyce.kong@arm.com> Reviewed-by: Gavin Hu <gavin.hu@arm.com> Reviewed-by: Phil Yang <phil.yang@arm.com>
2020-04-27 07:58:52 +00:00
['bitops_autotest', true],
test: allow no-huge mode for fast-tests In environments where hugepage are not available, such as containers, many cases in fast-tests suite should also run if no-huge EAL option is used. Flag is appended to each case in fast-tests suite to indicate whether it lives with no-huge mode. With the flag, fast-tests suite can be generated based on detected hugepage availability of building environment. All cases will be valid if hugepage is available, whereas only applicable cases will be added if environment has no hugepage support. Suggested-by: Aaron Conole <aconole@redhat.com> Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com> Reviewed-by: Gavin Hu <gavin.hu@arm.com> Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David Marchand <david.marchand@redhat.com>
2020-03-23 19:59:24 +00:00
['byteorder_autotest', true],
['cmdline_autotest', true],
['common_autotest', true],
['cpuflags_autotest', true],
['cycles_autotest', true],
['debug_autotest', true],
['eal_flags_c_opt_autotest', false],
['eal_flags_master_opt_autotest', false],
['eal_flags_n_opt_autotest', false],
['eal_flags_hpet_autotest', false],
['eal_flags_no_huge_autotest', false],
['eal_flags_w_opt_autotest', false],
['eal_flags_b_opt_autotest', false],
['eal_flags_vdev_opt_autotest', false],
['eal_flags_r_opt_autotest', false],
['eal_flags_mem_autotest', false],
['eal_flags_file_prefix_autotest', false],
['eal_flags_misc_autotest', false],
['eal_fs_autotest', true],
['errno_autotest', true],
['event_ring_autotest', true],
['fib_autotest', true],
['fib6_autotest', true],
['func_reentrancy_autotest', false],
['flow_classify_autotest', false],
['hash_autotest', true],
['interrupt_autotest', true],
test/ipfrag: add unit test case Initial IP fragmentation unit test. Signed-off-by: Aaron Conole <aconole@redhat.com> Tested-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com> Reviewed-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
2020-04-20 19:25:23 +00:00
['ipfrag_autotest', false],
eal: register non-EAL threads as lcores DPDK allows calling some part of its API from a non-EAL thread but this has some limitations. OVS (and other applications) has its own thread management but still want to avoid such limitations by hacking RTE_PER_LCORE(_lcore_id) and faking EAL threads potentially unknown of some DPDK component. Introduce a new API to register non-EAL thread and associate them to a free lcore with a new NON_EAL role. This role denotes lcores that do not run DPDK mainloop and as such prevents use of rte_eal_wait_lcore() and consorts. Multiprocess is not supported as the need for cohabitation with this new feature is unclear at the moment. Signed-off-by: David Marchand <david.marchand@redhat.com> Acked-by: Andrew Rybchenko <arybchenko@solarflare.com> Acked-by: Thomas Monjalon <thomas@monjalon.net> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2020-07-06 20:52:30 +00:00
['lcores_autotest', true],
test: allow no-huge mode for fast-tests In environments where hugepage are not available, such as containers, many cases in fast-tests suite should also run if no-huge EAL option is used. Flag is appended to each case in fast-tests suite to indicate whether it lives with no-huge mode. With the flag, fast-tests suite can be generated based on detected hugepage availability of building environment. All cases will be valid if hugepage is available, whereas only applicable cases will be added if environment has no hugepage support. Suggested-by: Aaron Conole <aconole@redhat.com> Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com> Reviewed-by: Gavin Hu <gavin.hu@arm.com> Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David Marchand <david.marchand@redhat.com>
2020-03-23 19:59:24 +00:00
['logs_autotest', true],
['lpm_autotest', true],
['lpm6_autotest', true],
['malloc_autotest', false],
['mbuf_autotest', false],
['mcslock_autotest', false],
['memcpy_autotest', true],
['memory_autotest', false],
['mempool_autotest', false],
['memzone_autotest', false],
['meter_autotest', true],
['multiprocess_autotest', false],
['per_lcore_autotest', true],
['prefetch_autotest', true],
['rcu_qsbr_autotest', true],
['red_autotest', true],
['rib_autotest', true],
['rib6_autotest', true],
['ring_autotest', true],
['rwlock_test1_autotest', true],
['rwlock_rda_autotest', true],
['rwlock_rds_wrm_autotest', true],
['rwlock_rde_wro_autotest', true],
['sched_autotest', true],
test/security: introduce security lib tests This patch introduces set of unit tests of librte_security API functions. Tests are added to dpdk-test application and can be run with "security_autotest" runtime command. This is the first patch in the series of patches as adding all test cases for all API functions in a single patch would make it unreadable. This patch defines structure of the file and necessary test framework initialization. It also contains first subset of unit tests for rte_security_session_create API function. Structure of the tests file is following: - macros for making tests more readable; - mockup structures and functions for rte_security_ops; - test suite and test cases setup and teardown functions; - tests functions; - declaration of testcases. Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com> Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
2020-04-09 17:24:54 +00:00
['security_autotest', false],
test: allow no-huge mode for fast-tests In environments where hugepage are not available, such as containers, many cases in fast-tests suite should also run if no-huge EAL option is used. Flag is appended to each case in fast-tests suite to indicate whether it lives with no-huge mode. With the flag, fast-tests suite can be generated based on detected hugepage availability of building environment. All cases will be valid if hugepage is available, whereas only applicable cases will be added if environment has no hugepage support. Suggested-by: Aaron Conole <aconole@redhat.com> Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com> Reviewed-by: Gavin Hu <gavin.hu@arm.com> Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David Marchand <david.marchand@redhat.com>
2020-03-23 19:59:24 +00:00
['spinlock_autotest', true],
['stack_autotest', false],
['stack_lf_autotest', false],
['string_autotest', true],
['table_autotest', true],
['tailq_autotest', true],
['timer_autotest', false],
['user_delay_us', true],
['version_autotest', true],
['crc_autotest', true],
['delay_us_sleep_autotest', true],
['distributor_autotest', false],
['eventdev_common_autotest', true],
['fbarray_autotest', true],
['hash_readwrite_func_autotest', false],
['ipsec_autotest', true],
['kni_autotest', false],
['kvargs_autotest', true],
['member_autotest', true],
['metrics_autotest', true],
['power_cpufreq_autotest', false],
['power_autotest', true],
['power_kvm_vm_autotest', false],
['reorder_autotest', true],
['service_autotest', true],
['thash_autotest', true],
test/trace: add functional test cases Example commands to run UT and check the traces with babeltrace viewer. - Delete the existing /root/dpdk-traces/ directory if needed. > sudo rm -rf /root/dpdk-traces/ - Start the dpdk-test > sudo ./build/app/test/dpdk-test -c 0x3 - --trace=.* - Run trace_autotest > trace_autotest - View the traces with babletrace viewer. > sudo babeltrace /root/dpdk-traces/ Signed-off-by: Sunil Kumar Kori <skori@marvell.com> Acked-by: David Marchand <david.marchand@redhat.com>
2020-04-22 19:03:43 +00:00
['trace_autotest', true],
test: reorder test cases in meson Categorize testcases into suites: - test cases that runs quickly - performance test cases - test cases that depend on specific drivers - logging or dump related test cases Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2019-01-18 17:40:44 +00:00
]
perf_test_names = [
'ring_perf_autotest',
'mempool_perf_autotest',
'memcpy_perf_autotest',
'hash_perf_autotest',
'timer_perf_autotest',
'reciprocal_division',
'reciprocal_division_perf',
'lpm_perf_autotest',
test/rib: speed up rib autotests Split slow part of rib_autotest into rib_slow_autotest Fixes: b35df4dd666e ("test/rib: add autotests") Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com> Acked-by: Aaron Conole <aconole@redhat.com>
2019-11-06 12:21:46 +00:00
'rib_slow_autotest',
test/fib: add autotests Functional tests for the new FIB library. Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
2019-11-01 15:21:42 +00:00
'fib_slow_autotest',
test/fib: add performance autotests Performance tests for the new FIB library. Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
2019-11-01 15:21:44 +00:00
'fib_perf_autotest',
test: reorder test cases in meson Categorize testcases into suites: - test cases that runs quickly - performance test cases - test cases that depend on specific drivers - logging or dump related test cases Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2019-01-18 17:40:44 +00:00
'red_all',
'barrier_autotest',
'hash_multiwriter_autotest',
'timer_racecond_autotest',
'efd_autotest',
'hash_functions_autotest',
'member_perf_autotest',
'efd_perf_autotest',
'lpm6_perf_autotest',
test/rib: speed up rib6 autotests Split slow part of rib6_autotest into rib6_slow_autotest Fixes: abab6d2966dc ("test/rib: add IPv6 autotests") Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com> Acked-by: Aaron Conole <aconole@redhat.com>
2019-11-06 12:21:47 +00:00
'rib6_slow_autotest',
test/fib: add IPv6 autotests Functional IPv6 tests for the FIB library. Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
2019-11-01 15:21:43 +00:00
'fib6_slow_autotest',
test/fib: add IPv6 performance autotests Performance IPv6 tests for the FIB library. Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
2019-11-01 15:21:45 +00:00
'fib6_perf_autotest',
test/rcu: add API and functional tests Add API positive/negative test cases, functional tests and performance tests. Signed-off-by: Malvika Gupta <malvika.gupta@arm.com> Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com> Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com> Reviewed-by: Gavin Hu <gavin.hu@arm.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2019-05-01 03:54:17 +00:00
'rcu_qsbr_perf_autotest',
test: reorder test cases in meson Categorize testcases into suites: - test cases that runs quickly - performance test cases - test cases that depend on specific drivers - logging or dump related test cases Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2019-01-18 17:40:44 +00:00
'red_perf',
'distributor_perf_autotest',
'pmd_perf_autotest',
test/stack: check stack performance stack_perf_autotest tests the following with one lcore: - Cycles to attempt to pop an empty stack - Cycles to push then pop a single object - Cycles to push then pop a burst of 32 objects It also tests the cycles to push then pop a burst of 8 and 32 objects with the following lcore combinations (if possible): - Two hyperthreads - Two physical cores - Two physical cores on separate NUMA nodes - All available lcores Signed-off-by: Gage Eads <gage.eads@intel.com> Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
2019-04-03 23:20:16 +00:00
'stack_perf_autotest',
test/stack: fix lock-free test name Fixes: 0420378bbfc4 ("test/stack: check lock-free implementation") Cc: stable@dpdk.org Signed-off-by: David Marchand <david.marchand@redhat.com> Acked-by: Aaron Conole <aconole@redhat.com>
2019-06-15 06:42:24 +00:00
'stack_lf_perf_autotest',
eal: replace libc-based random generation with LFSR This commit replaces rte_rand()'s use of lrand48() with a DPDK-native combined Linear Feedback Shift Register (LFSR) (also known as Tausworthe) pseudo-random number generator. This generator is faster and produces better-quality random numbers than the linear congruential generator (LCG) of lib's lrand48(). The implementation, as opposed to lrand48(), is multi-thread safe in regards to concurrent rte_rand() calls from different lcore threads. A LCG is still used, but only to seed the five per-lcore LFSR sequences. In addition, this patch also addresses the issue of the legacy implementation only producing 62 bits of pseudo randomness, while the API requires all 64 bits to be random. This pseudo-random number generator is not cryptographically secure - just like lrand48(). Bugzilla ID: 114 Bugzilla ID: 276 Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2019-06-28 09:01:20 +00:00
'rand_perf_autotest',
test/hash: split into shorter subtests hash_readwrite test was taking too much time to complete in Travis. Test is split into functional and perf test. perf test is being moved under perf testsuites in meson. Signed-off-by: Amit Gupta <agupta3@marvell.com> Acked-by: Yipeng Wang <yipeng1.wang@intel.com> Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
2020-02-03 19:49:08 +00:00
'hash_readwrite_perf_autotest',
test/hash: move lock-free tests to perf tests Move reader writer lock free tests to performance tests. Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
2020-02-03 19:49:11 +00:00
'hash_readwrite_lf_perf_autotest',
test/trace: add performance test cases This test case shall be used to measure the trace overhead. Example command to run the performance test case. echo "trace_perf_autotest" | ./build/app/test/dpdk-test -c 0x3 --trace=.* Signed-off-by: Jerin Jacob <jerinj@marvell.com> Acked-by: David Marchand <david.marchand@redhat.com>
2020-04-22 19:03:44 +00:00
'trace_perf_autotest',
test/ipsec: add performance cases Add new test-case to measure performance of IPsec data-path functions. Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com> Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com> Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
2020-04-23 15:25:04 +00:00
'ipsec_perf_autotest',
test: reorder test cases in meson Categorize testcases into suites: - test cases that runs quickly - performance test cases - test cases that depend on specific drivers - logging or dump related test cases Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2019-01-18 17:40:44 +00:00
]
driver_test_names = [
'cryptodev_aesni_mb_autotest',
'cryptodev_aesni_gcm_autotest',
test/crypto: move tests to the driver specific list For consistency, put all specific crypto driver tests in the dedicated list (in alphabetic order). While at it: - remove dead reference to cryptodev_sw_mrvl_autotest (renamed as cryptodev_sw_mvsam_autotest), - call the crypto scheduler test only when built, Fixes: 9eabcb682493 ("test: update autotest list") Fixes: 3d20ffe6ddb1 ("test: reorder test cases in meson") Cc: stable@dpdk.org Signed-off-by: David Marchand <david.marchand@redhat.com> Acked-by: Aaron Conole <aconole@redhat.com>
2019-06-15 06:42:17 +00:00
'cryptodev_dpaa_sec_autotest',
'cryptodev_dpaa2_sec_autotest',
test: reorder test cases in meson Categorize testcases into suites: - test cases that runs quickly - performance test cases - test cases that depend on specific drivers - logging or dump related test cases Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2019-01-18 17:40:44 +00:00
'cryptodev_null_autotest',
test/crypto: add OCTEON TX2 This patch adds the OCTEON TX2 crypto validation tests. Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com> Signed-off-by: Anoob Joseph <anoobj@marvell.com> Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com> Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
2019-10-16 15:25:41 +00:00
'cryptodev_octeontx2_autotest',
test/crypto: move tests to the driver specific list For consistency, put all specific crypto driver tests in the dedicated list (in alphabetic order). While at it: - remove dead reference to cryptodev_sw_mrvl_autotest (renamed as cryptodev_sw_mvsam_autotest), - call the crypto scheduler test only when built, Fixes: 9eabcb682493 ("test: update autotest list") Fixes: 3d20ffe6ddb1 ("test: reorder test cases in meson") Cc: stable@dpdk.org Signed-off-by: David Marchand <david.marchand@redhat.com> Acked-by: Aaron Conole <aconole@redhat.com>
2019-06-15 06:42:17 +00:00
'cryptodev_openssl_autotest',
'cryptodev_openssl_asym_autotest',
'cryptodev_qat_autotest',
'cryptodev_sw_armv8_autotest',
test: reorder test cases in meson Categorize testcases into suites: - test cases that runs quickly - performance test cases - test cases that depend on specific drivers - logging or dump related test cases Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2019-01-18 17:40:44 +00:00
'cryptodev_sw_kasumi_autotest',
test/crypto: move tests to the driver specific list For consistency, put all specific crypto driver tests in the dedicated list (in alphabetic order). While at it: - remove dead reference to cryptodev_sw_mrvl_autotest (renamed as cryptodev_sw_mvsam_autotest), - call the crypto scheduler test only when built, Fixes: 9eabcb682493 ("test: update autotest list") Fixes: 3d20ffe6ddb1 ("test: reorder test cases in meson") Cc: stable@dpdk.org Signed-off-by: David Marchand <david.marchand@redhat.com> Acked-by: Aaron Conole <aconole@redhat.com>
2019-06-15 06:42:17 +00:00
'cryptodev_sw_mvsam_autotest',
'cryptodev_sw_snow3g_autotest',
test: reorder test cases in meson Categorize testcases into suites: - test cases that runs quickly - performance test cases - test cases that depend on specific drivers - logging or dump related test cases Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2019-01-18 17:40:44 +00:00
'cryptodev_sw_zuc_autotest',
test/eventdev: move tests to the driver specific list Same treatment than crypto tests, move the eventdev drivers tests in the driver list. While at it: - eventdev_octeontx_autotest has been renamed as eventdev_selftest_octeontx, - eventdev_sw_autotest has been renamed as eventdev_selftest_sw, Fixes: 50fb749a3972 ("event/octeontx: move test to driver") Fixes: 85fb515b7318 ("event/sw: move test to driver") Fixes: 123d67c73b06 ("test/event: register selftests") Cc: stable@dpdk.org Signed-off-by: David Marchand <david.marchand@redhat.com> Acked-by: Aaron Conole <aconole@redhat.com>
2019-06-15 06:42:18 +00:00
'eventdev_selftest_octeontx',
'eventdev_selftest_sw',
test: add rawdev autotest to meson the test_rawdev.c file was missing from the meson.build file, and the test case from the list of test commands. Fixes: 55ca1b0f2151 ("raw/skeleton: add test cases") Cc: stable@dpdk.org Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
2019-07-02 09:56:06 +00:00
'rawdev_autotest',
test: reorder test cases in meson Categorize testcases into suites: - test cases that runs quickly - performance test cases - test cases that depend on specific drivers - logging or dump related test cases Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2019-01-18 17:40:44 +00:00
]
dump_test_names = [
'dump_struct_sizes',
'dump_mempool',
'dump_malloc_stats',
'dump_devargs',
'dump_log_types',
'dump_ring',
'dump_physmem',
'dump_memzone',
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
]
test: allow running shared build without installing Currently many unit tests fail when running tests under shared builds. This happens because of missing driver dependencies. This is fixed by explicitly linking in missing drivers for the test application. before and after (clang): https://travis-ci.com/Maickii/dpdk-2/jobs/212329160#L623 https://travis-ci.com/Maickii/dpdk-2/jobs/212335912#L620 Suggested-by: Bruce Richardson <bruce.richardson@intel.com> Suggested-by: David Marchand <david.marchand@redhat.com> Signed-off-by: Michael Santana <msantana@redhat.com> Signed-off-by: Aaron Conole <aconole@redhat.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Reviewed-by: David Marchand <david.marchand@redhat.com> Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
2019-08-02 21:25:51 +00:00
# The following linkages are an exception to allow running the
# unit tests without requiring that the developer install the
# DPDK libraries. Explicit linkage of drivers (plugin libraries)
# in applications should not be used.
if dpdk_conf.has('RTE_LIBRTE_RING_MEMPOOL')
test_deps += 'mempool_ring'
endif
if dpdk_conf.has('RTE_LIBRTE_STACK_MEMPOOL')
test_deps += 'mempool_stack'
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
endif
test: allow running shared build without installing Currently many unit tests fail when running tests under shared builds. This happens because of missing driver dependencies. This is fixed by explicitly linking in missing drivers for the test application. before and after (clang): https://travis-ci.com/Maickii/dpdk-2/jobs/212329160#L623 https://travis-ci.com/Maickii/dpdk-2/jobs/212335912#L620 Suggested-by: Bruce Richardson <bruce.richardson@intel.com> Suggested-by: David Marchand <david.marchand@redhat.com> Signed-off-by: Michael Santana <msantana@redhat.com> Signed-off-by: Aaron Conole <aconole@redhat.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Reviewed-by: David Marchand <david.marchand@redhat.com> Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
2019-08-02 21:25:51 +00:00
if dpdk_conf.has('RTE_LIBRTE_SKELETON_EVENTDEV_PMD')
test_deps += 'pmd_skeleton_event'
endif
telemetry: add utility functions for creating JSON The functions added in this patch will make it easier for telemetry to convert data to correct JSON responses to telemetry requests. Tests are also added for these json utility functions. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Reviewed-by: Keith Wiles <keith.wiles@intel.com>
2020-04-30 16:01:24 +00:00
if dpdk_conf.has('RTE_LIBRTE_TELEMETRY')
test_sources += 'test_telemetry_json.c'
fast_tests += [['telemetry_json_autotest', true]]
endif
test: allow running shared build without installing Currently many unit tests fail when running tests under shared builds. This happens because of missing driver dependencies. This is fixed by explicitly linking in missing drivers for the test application. before and after (clang): https://travis-ci.com/Maickii/dpdk-2/jobs/212329160#L623 https://travis-ci.com/Maickii/dpdk-2/jobs/212335912#L620 Suggested-by: Bruce Richardson <bruce.richardson@intel.com> Suggested-by: David Marchand <david.marchand@redhat.com> Signed-off-by: Michael Santana <msantana@redhat.com> Signed-off-by: Aaron Conole <aconole@redhat.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Reviewed-by: David Marchand <david.marchand@redhat.com> Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
2019-08-02 21:25:51 +00:00
# The following linkages of drivers are required because
# they are used via a driver-specific API.
test: build more test cases with meson This commit adds most of the remaining tests to the meson build. They can be run using test binary as normal, or via "ninja test". Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
2017-12-20 12:06:21 +00:00
if dpdk_conf.has('RTE_LIBRTE_BOND_PMD')
test_deps += 'pmd_bond'
test/bonding: allow disabling driver The autotest application build was partially enabled for building with the net/bond driver disabled, but a number of items were missed, leading to build errors when the driver was disabled, e.g. by simply doing "-Ddisable_drivers=net/*" when calling meson. ../app/test/test_link_bonding.c:25:10: fatal error: rte_eth_bond.h: \ No such file or directory With this fix in place, it's possible to build DPDK with meson with all non-bus, non-mempool drivers disabled i.e. using meson option -Ddisable_drivers=baseband/*,compress/*,crypto/*,event/*,net/*,raw/*,vdpa/* Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com> Tested-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
2020-05-01 15:05:49 +00:00
test_sources += ['test_link_bonding.c', 'test_link_bonding_rssconf.c']
driver_test_names += ['link_bonding_autotest', 'link_bonding_rssconf_autotest']
test: fix build with ring PMD but no bond PMD If the bonding pmd is disabled, all autotest associated with it should be disabled. However, some of those tests also depended upon the ring PMD so were placed in a block depending on that driver - and unfortunately that driver alone. This caused build failures if the ring PMD was enabled but the bonding PMD disabled, due to missing header files and driver libs. This error can be reproduced by configuring DPDK using e.g. meson configure -Ddisable_drivers=net/[!r]* build (which will disable all drivers not starting with "r"), and then building using ninja. Fix this by moving all link bonding autotests to the one block and putting a second conditional check within that block for those also requiring the ring PMD. Fixes: 7f6ef1664027 ("test/bonding: allow disabling driver") Fixes: 207b1c813f39 ("test: fix build without ring PMD") Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Reviewed-by: David Marchand <david.marchand@redhat.com>
2020-05-27 14:57:45 +00:00
if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
test_sources += 'test_link_bonding_mode4.c'
driver_test_names += 'link_bonding_mode4_autotest'
endif
test: build more test cases with meson This commit adds most of the remaining tests to the meson build. They can be run using test binary as normal, or via "ninja test". Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
2017-12-20 12:06:21 +00:00
endif
if dpdk_conf.has('RTE_LIBRTE_RING_PMD')
test_deps += 'pmd_ring'
test: fix build without ring PMD Some unit tests has dependency on RING PMD, so this patch is trying to fix those and other closely related issues. 1)pdump, latency, bitrate, ring PMD and test_event_eth_tx_adapter unit tests are dependent on ring PMD, so compile those tests only when ring PMD is enabled else ignore. 2)get rid of make file error which was added by bond unit test for ring PMD disabled case which is not necessary. 3)Tx adapter UT is dependent on RING PMD, but it was observed that it was missing from the run in meson build, so added it. TX adapter UT uses 'sw event and 'null' pmd drivers, so for shared builds the drivers .so path has to be passed to the test args of meson UT run. Fixes: 086eb64db3 ("test/pdump: add unit test for pdump library") Fixes: fdeb30fa71 ("test/bitrate: add unit tests for bitrate library") Fixes: 1e3676a06e ("test/latency: add unit tests for latencystats library") Fixes: 46cf97e4bb ("eventdev: add test for eth Tx adapter") Fixes: d23e09e0ef ("app/test: link with ring pmd when needed") Cc: stable@dpdk.org Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Reshma Pattan <reshma.pattan@intel.com> Tested-by: Nikhil Rao <nikhil.rao@intel.com> Tested-by: Bruce Richardson <bruce.richardson@intel.com>
2019-12-23 06:53:05 +00:00
test_sources += 'test_pmd_ring_perf.c'
test_sources += 'test_pmd_ring.c'
test_sources += 'test_event_eth_tx_adapter.c'
test_sources += 'test_bitratestats.c'
test_sources += 'test_latencystats.c'
test_sources += 'sample_packet_forward.c'
test_sources += 'test_pdump.c'
test: allow no-huge mode for fast-tests In environments where hugepage are not available, such as containers, many cases in fast-tests suite should also run if no-huge EAL option is used. Flag is appended to each case in fast-tests suite to indicate whether it lives with no-huge mode. With the flag, fast-tests suite can be generated based on detected hugepage availability of building environment. All cases will be valid if hugepage is available, whereas only applicable cases will be added if environment has no hugepage support. Suggested-by: Aaron Conole <aconole@redhat.com> Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com> Reviewed-by: Gavin Hu <gavin.hu@arm.com> Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David Marchand <david.marchand@redhat.com>
2020-03-23 19:59:24 +00:00
fast_tests += [['ring_pmd_autotest', true]]
test: fix build without ring PMD Some unit tests has dependency on RING PMD, so this patch is trying to fix those and other closely related issues. 1)pdump, latency, bitrate, ring PMD and test_event_eth_tx_adapter unit tests are dependent on ring PMD, so compile those tests only when ring PMD is enabled else ignore. 2)get rid of make file error which was added by bond unit test for ring PMD disabled case which is not necessary. 3)Tx adapter UT is dependent on RING PMD, but it was observed that it was missing from the run in meson build, so added it. TX adapter UT uses 'sw event and 'null' pmd drivers, so for shared builds the drivers .so path has to be passed to the test args of meson UT run. Fixes: 086eb64db3 ("test/pdump: add unit test for pdump library") Fixes: fdeb30fa71 ("test/bitrate: add unit tests for bitrate library") Fixes: 1e3676a06e ("test/latency: add unit tests for latencystats library") Fixes: 46cf97e4bb ("eventdev: add test for eth Tx adapter") Fixes: d23e09e0ef ("app/test: link with ring pmd when needed") Cc: stable@dpdk.org Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Reshma Pattan <reshma.pattan@intel.com> Tested-by: Nikhil Rao <nikhil.rao@intel.com> Tested-by: Bruce Richardson <bruce.richardson@intel.com>
2019-12-23 06:53:05 +00:00
perf_test_names += 'ring_pmd_perf_autotest'
test: allow no-huge mode for fast-tests In environments where hugepage are not available, such as containers, many cases in fast-tests suite should also run if no-huge EAL option is used. Flag is appended to each case in fast-tests suite to indicate whether it lives with no-huge mode. With the flag, fast-tests suite can be generated based on detected hugepage availability of building environment. All cases will be valid if hugepage is available, whereas only applicable cases will be added if environment has no hugepage support. Suggested-by: Aaron Conole <aconole@redhat.com> Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com> Reviewed-by: Gavin Hu <gavin.hu@arm.com> Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David Marchand <david.marchand@redhat.com>
2020-03-23 19:59:24 +00:00
fast_tests += [['event_eth_tx_adapter_autotest', false]]
fast_tests += [['bitratestats_autotest', true]]
fast_tests += [['latencystats_autotest', true]]
fast_tests += [['pdump_autotest', true]]
test: build more test cases with meson This commit adds most of the remaining tests to the meson build. They can be run using test binary as normal, or via "ninja test". Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
2017-12-20 12:06:21 +00:00
endif
test: allow running shared build without installing Currently many unit tests fail when running tests under shared builds. This happens because of missing driver dependencies. This is fixed by explicitly linking in missing drivers for the test application. before and after (clang): https://travis-ci.com/Maickii/dpdk-2/jobs/212329160#L623 https://travis-ci.com/Maickii/dpdk-2/jobs/212335912#L620 Suggested-by: Bruce Richardson <bruce.richardson@intel.com> Suggested-by: David Marchand <david.marchand@redhat.com> Signed-off-by: Michael Santana <msantana@redhat.com> Signed-off-by: Aaron Conole <aconole@redhat.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Reviewed-by: David Marchand <david.marchand@redhat.com> Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
2019-08-02 21:25:51 +00:00
test/power: fix dependency for BSD meson build The power library is not built on FreeBSD, so it needs to be an optional rather than a mandatory dependency for building the autotest binary. Fixes: b5dc795a8a55 ("test: build app with meson as dpdk-test") Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
2018-02-01 14:20:10 +00:00
if dpdk_conf.has('RTE_LIBRTE_POWER')
test_deps += 'power'
endif
test/kni: fix dependency for BSD meson build The KNI library is not built on FreeBSD, so it needs to be an optional rather than a mandatory dependency for building the autotest binary. Fixes: b5dc795a8a55 ("test: build app with meson as dpdk-test") Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
2018-02-01 14:20:11 +00:00
if dpdk_conf.has('RTE_LIBRTE_KNI')
test_deps += 'kni'
endif
test: allow running shared build without installing Currently many unit tests fail when running tests under shared builds. This happens because of missing driver dependencies. This is fixed by explicitly linking in missing drivers for the test application. before and after (clang): https://travis-ci.com/Maickii/dpdk-2/jobs/212329160#L623 https://travis-ci.com/Maickii/dpdk-2/jobs/212335912#L620 Suggested-by: Bruce Richardson <bruce.richardson@intel.com> Suggested-by: David Marchand <david.marchand@redhat.com> Signed-off-by: Michael Santana <msantana@redhat.com> Signed-off-by: Aaron Conole <aconole@redhat.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Reviewed-by: David Marchand <david.marchand@redhat.com> Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
2019-08-02 21:25:51 +00:00
if dpdk_conf.has('RTE_LIBRTE_PDUMP')
test_deps += 'pdump'
endif
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
build: fix for host clang and cross gcc The following error hits if host cc compiler is clang(default one in most linux distributions) and the cross compiler is gcc. The root cause is: the hybride compilers add the warning options to the meson project as project arguments, which apply for both host compiling and cross compiling. But some options such as '-Wno-format-truncation' are not supported nor recognized by clang, so they have to be removed from the project arguments for the host compiler to run smoothily and added back as cflags for the cross compiler to compile for cross source files. The fix is remove unrecognized warning options from the meson project arguments shared by gcc and clang, as add them specifically for gcc or clang as cflags. [265/893] Compiling C object 'buildtools/pmdinfogen/pmdinfogen@exe/pmdinfogen.c.o'. warning: unknown warning option '-Wno-format-truncation' [-Wunknown-warning-option] Fixes: a55277a788 ("devtools: add test script for meson builds") Cc: stable@dpdk.org Signed-off-by: Gavin Hu <gavin.hu@arm.com> Reviewed-by: Phil Yang <phil.yang@arm.com> Reviewed-by: Song Zhu <song.zhu@arm.com> Reviewed-by: Steve Capper <steve.capper@arm.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2018-06-29 17:27:37 +00:00
if cc.has_argument('-Wno-format-truncation')
cflags += '-Wno-format-truncation'
endif
mk: build with _GNU_SOURCE defined by default We use _GNU_SOURCE all over the place, but often times we miss defining it, resulting in broken builds on musl. Rather than fixing every library's and driver's and application's makefile, fix it by simply defining _GNU_SOURCE by default for all builds. Remove all usages of _GNU_SOURCE in source files and makefiles, and also fixup a couple of instances of using __USE_GNU instead of _GNU_SOURCE. Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
2018-10-04 10:20:33 +00:00
# specify -D_GNU_SOURCE unconditionally
app/test: fix flags with meson in app/test/meson.build the default_cflag is never used so the -D_GNU_SOURCE was never passed as intended. Fixes the following build error with musl libc: lib/librte_eal/common/include/rte_lcore.h:26:9: error: unknown type name 'cpu_set_t' typedef cpu_set_t rte_cpuset_t; ^~~~~~~~~ The problem is that cpu_set_t is only defined when _GNU_SOURCE is set. Fixes: 5d7b673d5fd6 ("mk: build with _GNU_SOURCE defined by default") Cc: stable@dpdk.org Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
2019-03-13 17:06:51 +00:00
cflags += '-D_GNU_SOURCE'
test/graph: add functional tests Adding the unit test to test the functionality of node and graph APIs. Testing includes registering a node, cloning a node, creating a graph, perform graph walk, collecting stats and all node and graph debug APIs. example command to test: echo "graph_autotest" | sudo ./build/app/test/dpdk-test -c 0x30 Signed-off-by: Kiran Kumar K <kirankumark@marvell.com> Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
2020-04-11 14:14:12 +00:00
# Strict-aliasing rules are violated by uint8_t[] to context size casts.
cflags += '-fno-strict-aliasing'
mk: build with _GNU_SOURCE defined by default We use _GNU_SOURCE all over the place, but often times we miss defining it, resulting in broken builds on musl. Rather than fixing every library's and driver's and application's makefile, fix it by simply defining _GNU_SOURCE by default for all builds. Remove all usages of _GNU_SOURCE in source files and makefiles, and also fixup a couple of instances of using __USE_GNU instead of _GNU_SOURCE. Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
2018-10-04 10:20:33 +00:00
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
test_dep_objs = []
test: reorder test cases in meson Categorize testcases into suites: - test cases that runs quickly - performance test cases - test cases that depend on specific drivers - logging or dump related test cases Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2019-01-18 17:40:44 +00:00
if dpdk_conf.has('RTE_LIBRTE_COMPRESSDEV')
compress_test_dep = dependency('zlib', required: false)
if compress_test_dep.found()
test_dep_objs += compress_test_dep
test_sources += 'test_compressdev.c'
test_deps += 'compressdev'
test: allow no-huge mode for fast-tests In environments where hugepage are not available, such as containers, many cases in fast-tests suite should also run if no-huge EAL option is used. Flag is appended to each case in fast-tests suite to indicate whether it lives with no-huge mode. With the flag, fast-tests suite can be generated based on detected hugepage availability of building environment. All cases will be valid if hugepage is available, whereas only applicable cases will be added if environment has no hugepage support. Suggested-by: Aaron Conole <aconole@redhat.com> Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com> Reviewed-by: Gavin Hu <gavin.hu@arm.com> Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David Marchand <david.marchand@redhat.com>
2020-03-23 19:59:24 +00:00
fast_tests += [['compressdev_autotest', false]]
test: reorder test cases in meson Categorize testcases into suites: - test cases that runs quickly - performance test cases - test cases that depend on specific drivers - logging or dump related test cases Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2019-01-18 17:40:44 +00:00
endif
test/compress: add initial unit tests This commit introduces the initial tests for compressdev, performing basic compression and decompression operations of sample test buffers, using the Zlib library in one direction and compressdev in another direction, to make sure that the library is compatible with Zlib. Due to the use of Zlib API, the test is disabled by default, to avoid adding a new dependency on DPDK. Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com> Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com> Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com> Acked-by: Fiona Trahe <fiona.trahe@intel.com> Acked-by: Lee Daly <lee.daly@intel.com>
2018-05-04 10:22:14 +00:00
endif
test/crypto: move tests to the driver specific list For consistency, put all specific crypto driver tests in the dedicated list (in alphabetic order). While at it: - remove dead reference to cryptodev_sw_mrvl_autotest (renamed as cryptodev_sw_mvsam_autotest), - call the crypto scheduler test only when built, Fixes: 9eabcb682493 ("test: update autotest list") Fixes: 3d20ffe6ddb1 ("test: reorder test cases in meson") Cc: stable@dpdk.org Signed-off-by: David Marchand <david.marchand@redhat.com> Acked-by: Aaron Conole <aconole@redhat.com>
2019-06-15 06:42:17 +00:00
if dpdk_conf.has('RTE_LIBRTE_PMD_CRYPTO_SCHEDULER')
driver_test_names += 'cryptodev_scheduler_autotest'
endif
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
foreach d:test_deps
def_lib = get_option('default_library')
test_dep_objs += get_variable(def_lib + '_rte_' + d)
endforeach
build: fix dependency on execinfo for BSD meson builds The binaries and apps in DPDK all need to be linked against the execinfo library on FreeBSD so add this as a dependency in cases where it is found. It's available by default on BSD, but not at all on Linux Fixes: 16ade738fd0d ("app/testpmd: build with meson") Fixes: 89f0711f9ddf ("examples: build some samples with meson") Fixes: b5dc795a8a55 ("test: build app with meson as dpdk-test") Fixes: 2ff67267b049 ("app/eventdev: build with meson") Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
2018-02-01 14:20:08 +00:00
test_dep_objs += cc.find_library('execinfo', required: false)
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
link_libs = []
if get_option('default_library') == 'static'
build: always link whole DPDK static libraries To ensure all constructors are included in static build, we need to pass the --whole-archive flag when linking, which is used with the "link_whole" meson option. Since we use link_whole for all libs, we no longer need to track the lib as part of the static dependency, just the path to the headers for compiling. After this patch is applied, all DPDK .a files are inside --whole-archive/--no-whole-archive flags, but external dependencies and shared libs being linked against remain outside. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Tested-by: Andrzej Ostruszka <aostruszka@marvell.com> Acked-by: Luca Boccassi <bluca@debian.org> Acked-by: Sunil Pai G <sunil.pai.g@intel.com> Acked-by: Thomas Monjalon <thomas@monjalon.net>
2020-06-30 14:14:27 +00:00
link_libs = dpdk_static_libraries + dpdk_drivers
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
endif
test: skip meson dependency checks if not required Don't need to check dependencies if test apps will not be built anyway. Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Aaron Conole <aconole@redhat.com> Acked-by: Luca Boccassi <bluca@debian.org>
2019-05-30 12:38:36 +00:00
dpdk_test = executable('dpdk-test',
test_sources,
build: remove special handling for node library The node library had a need of being linked as a whole to make some constructors effective. Now that all libraries are linked with --whole-archive, there is no need to have this library separate. Fixes: e2db26f76673 ("build: always link whole DPDK static libraries") Signed-off-by: Thomas Monjalon <thomas@monjalon.net> Tested-by: Jerin Jacob <jerinj@marvell.com>
2020-07-01 07:31:34 +00:00
link_whole: link_libs,
test: skip meson dependency checks if not required Don't need to check dependencies if test apps will not be built anyway. Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Aaron Conole <aconole@redhat.com> Acked-by: Luca Boccassi <bluca@debian.org>
2019-05-30 12:38:36 +00:00
dependencies: test_dep_objs,
build: disable experimental API check internally Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib and drivers. This changes reduces the clutter across the project while still maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning external applications about experimental API usage. Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com> Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com> Signed-off-by: David Marchand <david.marchand@redhat.com>
2020-04-13 14:55:30 +00:00
c_args: cflags,
test: fix rpath for drivers with meson This commit fixes the setting of relative rpath on dpdk-test for drivers ($libdir/dpdk/pmd-$abiver) to the correct absolute rpath ($prefix$libdir/dpdk/pmd-$abiver). Fixes: b5dc795a8a55 ("test: build app with meson as dpdk-test") Cc: stable@dpdk.org Signed-off-by: Timothy Redaelli <tredaelli@redhat.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2020-07-01 17:16:38 +00:00
install_rpath: join_paths(get_option('prefix'),
driver_install_path),
test: enable installing app with meson Currently, the test app is not being installed by default when built and installed with meson build system. Fix that to enable installation of the test app alongside other DPDK apps. Fixes: b5dc795a8a55 ("test: build app with meson as dpdk-test") Cc: stable@dpdk.org Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2019-07-24 15:47:31 +00:00
install: true)
test: build app with meson as dpdk-test This patch enables the test/test app to be built. It also adds the test binary to be a meson-test, which allows the meson test infrastructure to be used to run tests. Tests are listed using the same test binary, however each test sets a different DPDK_TEST environment variable. The string contents of this DPDK_TEST env var is entered in the command line interface. As such, the familiar test names such as "ring_perf_autotest" etc are valid tests to run using this meson test infrastructure. Note that the tests are run serially, given that we cannot run multiple primary processes at a time. As each test must initialize EAL this takes some time depending on the number of hugepages. In future, we could improve this to run multiple tests from one EAL init, but it is out of scope for this patchset. Finally, an option to build the tests is added to the meson build options. When disabled, the unit test code in test/test is not compiled. The default is set to 'true'. To disable, run: $ meson configure -Dtests=false Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2017-12-20 11:16:32 +00:00
test: remove meson dependency on /proc file Meson is detecting the path /proc/sys/vm/nr_hugepages in the call to cat in app/test/meson.build and then adding it as a build dependency. This causes build loop if the timestamp of this file keeps changing. It is fixed by hiding hugepage check in a shell script. Fixes: 77784ef0fba8 ("test: allow no-huge mode for fast-tests") Signed-off-by: Thomas Monjalon <thomas@monjalon.net> Tested-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com> Reviewed-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com> Acked-by: Aaron Conole <aconole@redhat.com> Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2020-04-09 16:41:49 +00:00
has_hugepage = run_command('has-hugepage.sh').stdout().strip() != '0'
test: allow no-huge mode for fast-tests In environments where hugepage are not available, such as containers, many cases in fast-tests suite should also run if no-huge EAL option is used. Flag is appended to each case in fast-tests suite to indicate whether it lives with no-huge mode. With the flag, fast-tests suite can be generated based on detected hugepage availability of building environment. All cases will be valid if hugepage is available, whereas only applicable cases will be added if environment has no hugepage support. Suggested-by: Aaron Conole <aconole@redhat.com> Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com> Reviewed-by: Gavin Hu <gavin.hu@arm.com> Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David Marchand <david.marchand@redhat.com>
2020-03-23 19:59:24 +00:00
message('hugepage availability: @0@'.format(has_hugepage))
test: skip meson dependency checks if not required Don't need to check dependencies if test apps will not be built anyway. Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Aaron Conole <aconole@redhat.com> Acked-by: Luca Boccassi <bluca@debian.org>
2019-05-30 12:38:36 +00:00
# some perf tests (eg: memcpy perf autotest)take very long
# to complete, so timeout to 10 minutes
timeout_seconds = 600
timeout_seconds_fast = 10
test: detect number of cores with meson The arguments being passed will cause failures on laptops that have, for instance, 2 cores only. Most of the tests don't require more than a single core. Some require multiple cores (but those tests should be modified to 'SKIP' when the correct number of cores aren't available). The unit test results shouldn't be impacted by this change, but it allows for a future enhancement to pass flags such as '--no-huge'. Also include a fix to a reported issue with running on FreeBSD. Signed-off-by: Aaron Conole <aconole@redhat.com> Reviewed-by: David Marchand <david.marchand@redhat.com> Acked-by: Luca Boccassi <bluca@debian.org> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2019-04-12 16:21:41 +00:00
app/test: remove meson dependency on file in /sys Meson versions 0.52 and 0.53 are being overly smart and detecting the path "/sys/devices/system/cpu/present" in the call to cat in app/test/meson.build and then adding it as a dependency to the build configuration. This causes issues on systems where the timestamp of that file always returns the current time, since it means that the build.ninja file is always out of date, and therefore needs to be rebuilt. We can fix this by just using a simple shell script to return the coremask appropriately for BSD and Linux, and removing that code logic from meson - thereby hiding the use of the /sys file. Fixes: c70622ac6f72 ("test: detect number of cores with meson") Cc: stable@dpdk.org Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
2020-01-20 12:22:18 +00:00
get_coremask = find_program('get-coremask.sh')
num_cores_arg = '-l ' + run_command(get_coremask).stdout().strip()
test: reorder test cases in meson Categorize testcases into suites: - test cases that runs quickly - performance test cases - test cases that depend on specific drivers - logging or dump related test cases Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2019-01-18 17:40:44 +00:00
test: load drivers when required Concatenating to test_args if event_eth_tx_adapter_autotest is executed makes all subsequent tests inherit from the drivers loading while this is unneeded. Fixes: 207b1c813f39 ("test: fix build without ring PMD") Cc: stable@dpdk.org Signed-off-by: David Marchand <david.marchand@redhat.com> Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com> Acked-by: Aaron Conole <aconole@redhat.com>
2020-03-23 19:59:22 +00:00
default_test_args = [num_cores_arg]
test: fix build without ring PMD Some unit tests has dependency on RING PMD, so this patch is trying to fix those and other closely related issues. 1)pdump, latency, bitrate, ring PMD and test_event_eth_tx_adapter unit tests are dependent on ring PMD, so compile those tests only when ring PMD is enabled else ignore. 2)get rid of make file error which was added by bond unit test for ring PMD disabled case which is not necessary. 3)Tx adapter UT is dependent on RING PMD, but it was observed that it was missing from the run in meson build, so added it. TX adapter UT uses 'sw event and 'null' pmd drivers, so for shared builds the drivers .so path has to be passed to the test args of meson UT run. Fixes: 086eb64db3 ("test/pdump: add unit test for pdump library") Fixes: fdeb30fa71 ("test/bitrate: add unit tests for bitrate library") Fixes: 1e3676a06e ("test/latency: add unit tests for latencystats library") Fixes: 46cf97e4bb ("eventdev: add test for eth Tx adapter") Fixes: d23e09e0ef ("app/test: link with ring pmd when needed") Cc: stable@dpdk.org Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Reshma Pattan <reshma.pattan@intel.com> Tested-by: Nikhil Rao <nikhil.rao@intel.com> Tested-by: Bruce Richardson <bruce.richardson@intel.com>
2019-12-23 06:53:05 +00:00
test: allow no-huge mode for fast-tests In environments where hugepage are not available, such as containers, many cases in fast-tests suite should also run if no-huge EAL option is used. Flag is appended to each case in fast-tests suite to indicate whether it lives with no-huge mode. With the flag, fast-tests suite can be generated based on detected hugepage availability of building environment. All cases will be valid if hugepage is available, whereas only applicable cases will be added if environment has no hugepage support. Suggested-by: Aaron Conole <aconole@redhat.com> Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com> Reviewed-by: Gavin Hu <gavin.hu@arm.com> Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David Marchand <david.marchand@redhat.com>
2020-03-23 19:59:24 +00:00
foreach arg : fast_tests
test: load drivers when required Concatenating to test_args if event_eth_tx_adapter_autotest is executed makes all subsequent tests inherit from the drivers loading while this is unneeded. Fixes: 207b1c813f39 ("test: fix build without ring PMD") Cc: stable@dpdk.org Signed-off-by: David Marchand <david.marchand@redhat.com> Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com> Acked-by: Aaron Conole <aconole@redhat.com>
2020-03-23 19:59:22 +00:00
test_args = default_test_args
test: allow no-huge mode for fast-tests In environments where hugepage are not available, such as containers, many cases in fast-tests suite should also run if no-huge EAL option is used. Flag is appended to each case in fast-tests suite to indicate whether it lives with no-huge mode. With the flag, fast-tests suite can be generated based on detected hugepage availability of building environment. All cases will be valid if hugepage is available, whereas only applicable cases will be added if environment has no hugepage support. Suggested-by: Aaron Conole <aconole@redhat.com> Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com> Reviewed-by: Gavin Hu <gavin.hu@arm.com> Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David Marchand <david.marchand@redhat.com>
2020-03-23 19:59:24 +00:00
run_test = true
if not has_hugepage
if arg[1]
test_args += ['--no-huge', '-m', '2048']
else
run_test = false
endif
endif
test: load drivers when required Concatenating to test_args if event_eth_tx_adapter_autotest is executed makes all subsequent tests inherit from the drivers loading while this is unneeded. Fixes: 207b1c813f39 ("test: fix build without ring PMD") Cc: stable@dpdk.org Signed-off-by: David Marchand <david.marchand@redhat.com> Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com> Acked-by: Aaron Conole <aconole@redhat.com>
2020-03-23 19:59:22 +00:00
test: fix build without ring PMD Some unit tests has dependency on RING PMD, so this patch is trying to fix those and other closely related issues. 1)pdump, latency, bitrate, ring PMD and test_event_eth_tx_adapter unit tests are dependent on ring PMD, so compile those tests only when ring PMD is enabled else ignore. 2)get rid of make file error which was added by bond unit test for ring PMD disabled case which is not necessary. 3)Tx adapter UT is dependent on RING PMD, but it was observed that it was missing from the run in meson build, so added it. TX adapter UT uses 'sw event and 'null' pmd drivers, so for shared builds the drivers .so path has to be passed to the test args of meson UT run. Fixes: 086eb64db3 ("test/pdump: add unit test for pdump library") Fixes: fdeb30fa71 ("test/bitrate: add unit tests for bitrate library") Fixes: 1e3676a06e ("test/latency: add unit tests for latencystats library") Fixes: 46cf97e4bb ("eventdev: add test for eth Tx adapter") Fixes: d23e09e0ef ("app/test: link with ring pmd when needed") Cc: stable@dpdk.org Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Reshma Pattan <reshma.pattan@intel.com> Tested-by: Nikhil Rao <nikhil.rao@intel.com> Tested-by: Bruce Richardson <bruce.richardson@intel.com>
2019-12-23 06:53:05 +00:00
if (get_option('default_library') == 'shared' and
test: allow no-huge mode for fast-tests In environments where hugepage are not available, such as containers, many cases in fast-tests suite should also run if no-huge EAL option is used. Flag is appended to each case in fast-tests suite to indicate whether it lives with no-huge mode. With the flag, fast-tests suite can be generated based on detected hugepage availability of building environment. All cases will be valid if hugepage is available, whereas only applicable cases will be added if environment has no hugepage support. Suggested-by: Aaron Conole <aconole@redhat.com> Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com> Reviewed-by: Gavin Hu <gavin.hu@arm.com> Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David Marchand <david.marchand@redhat.com>
2020-03-23 19:59:24 +00:00
arg[0] == 'event_eth_tx_adapter_autotest')
test: fix build without ring PMD Some unit tests has dependency on RING PMD, so this patch is trying to fix those and other closely related issues. 1)pdump, latency, bitrate, ring PMD and test_event_eth_tx_adapter unit tests are dependent on ring PMD, so compile those tests only when ring PMD is enabled else ignore. 2)get rid of make file error which was added by bond unit test for ring PMD disabled case which is not necessary. 3)Tx adapter UT is dependent on RING PMD, but it was observed that it was missing from the run in meson build, so added it. TX adapter UT uses 'sw event and 'null' pmd drivers, so for shared builds the drivers .so path has to be passed to the test args of meson UT run. Fixes: 086eb64db3 ("test/pdump: add unit test for pdump library") Fixes: fdeb30fa71 ("test/bitrate: add unit tests for bitrate library") Fixes: 1e3676a06e ("test/latency: add unit tests for latencystats library") Fixes: 46cf97e4bb ("eventdev: add test for eth Tx adapter") Fixes: d23e09e0ef ("app/test: link with ring pmd when needed") Cc: stable@dpdk.org Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Reshma Pattan <reshma.pattan@intel.com> Tested-by: Nikhil Rao <nikhil.rao@intel.com> Tested-by: Bruce Richardson <bruce.richardson@intel.com>
2019-12-23 06:53:05 +00:00
foreach drv:dpdk_drivers
test_args += ['-d', drv.full_path().split('.a')[0] + '.so']
endforeach
endif
test: load drivers when required Concatenating to test_args if event_eth_tx_adapter_autotest is executed makes all subsequent tests inherit from the drivers loading while this is unneeded. Fixes: 207b1c813f39 ("test: fix build without ring PMD") Cc: stable@dpdk.org Signed-off-by: David Marchand <david.marchand@redhat.com> Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com> Acked-by: Aaron Conole <aconole@redhat.com>
2020-03-23 19:59:22 +00:00
if is_linux
test: allow no-huge mode for fast-tests In environments where hugepage are not available, such as containers, many cases in fast-tests suite should also run if no-huge EAL option is used. Flag is appended to each case in fast-tests suite to indicate whether it lives with no-huge mode. With the flag, fast-tests suite can be generated based on detected hugepage availability of building environment. All cases will be valid if hugepage is available, whereas only applicable cases will be added if environment has no hugepage support. Suggested-by: Aaron Conole <aconole@redhat.com> Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com> Reviewed-by: Gavin Hu <gavin.hu@arm.com> Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David Marchand <david.marchand@redhat.com>
2020-03-23 19:59:24 +00:00
test_args += ['--file-prefix=@0@'.format(arg[0])]
test: load drivers when required Concatenating to test_args if event_eth_tx_adapter_autotest is executed makes all subsequent tests inherit from the drivers loading while this is unneeded. Fixes: 207b1c813f39 ("test: fix build without ring PMD") Cc: stable@dpdk.org Signed-off-by: David Marchand <david.marchand@redhat.com> Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com> Acked-by: Aaron Conole <aconole@redhat.com>
2020-03-23 19:59:22 +00:00
endif
test: allow no-huge mode for fast-tests In environments where hugepage are not available, such as containers, many cases in fast-tests suite should also run if no-huge EAL option is used. Flag is appended to each case in fast-tests suite to indicate whether it lives with no-huge mode. With the flag, fast-tests suite can be generated based on detected hugepage availability of building environment. All cases will be valid if hugepage is available, whereas only applicable cases will be added if environment has no hugepage support. Suggested-by: Aaron Conole <aconole@redhat.com> Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com> Reviewed-by: Gavin Hu <gavin.hu@arm.com> Acked-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David Marchand <david.marchand@redhat.com>
2020-03-23 19:59:24 +00:00
if run_test
test(arg[0], dpdk_test,
env : ['DPDK_TEST=' + arg[0]],
args : test_args,
timeout : timeout_seconds_fast,
is_parallel : false,
suite : 'fast-tests')
endif
test: skip meson dependency checks if not required Don't need to check dependencies if test apps will not be built anyway. Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Aaron Conole <aconole@redhat.com> Acked-by: Luca Boccassi <bluca@debian.org>
2019-05-30 12:38:36 +00:00
endforeach
foreach arg : perf_test_names
test(arg, dpdk_test,
env : ['DPDK_TEST=' + arg],
test: load drivers when required Concatenating to test_args if event_eth_tx_adapter_autotest is executed makes all subsequent tests inherit from the drivers loading while this is unneeded. Fixes: 207b1c813f39 ("test: fix build without ring PMD") Cc: stable@dpdk.org Signed-off-by: David Marchand <david.marchand@redhat.com> Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com> Acked-by: Aaron Conole <aconole@redhat.com>
2020-03-23 19:59:22 +00:00
args : default_test_args,
test: skip meson dependency checks if not required Don't need to check dependencies if test apps will not be built anyway. Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Aaron Conole <aconole@redhat.com> Acked-by: Luca Boccassi <bluca@debian.org>
2019-05-30 12:38:36 +00:00
timeout : timeout_seconds,
is_parallel : false,
suite : 'perf-tests')
endforeach
foreach arg : driver_test_names
test(arg, dpdk_test,
test: reorder test cases in meson Categorize testcases into suites: - test cases that runs quickly - performance test cases - test cases that depend on specific drivers - logging or dump related test cases Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2019-01-18 17:40:44 +00:00
env : ['DPDK_TEST=' + arg],
test: load drivers when required Concatenating to test_args if event_eth_tx_adapter_autotest is executed makes all subsequent tests inherit from the drivers loading while this is unneeded. Fixes: 207b1c813f39 ("test: fix build without ring PMD") Cc: stable@dpdk.org Signed-off-by: David Marchand <david.marchand@redhat.com> Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com> Acked-by: Aaron Conole <aconole@redhat.com>
2020-03-23 19:59:22 +00:00
args : default_test_args,
test: reorder test cases in meson Categorize testcases into suites: - test cases that runs quickly - performance test cases - test cases that depend on specific drivers - logging or dump related test cases Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2019-01-18 17:40:44 +00:00
timeout : timeout_seconds,
is_parallel : false,
test: skip meson dependency checks if not required Don't need to check dependencies if test apps will not be built anyway. Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Aaron Conole <aconole@redhat.com> Acked-by: Luca Boccassi <bluca@debian.org>
2019-05-30 12:38:36 +00:00
suite : 'driver-tests')
endforeach
test: reorder test cases in meson Categorize testcases into suites: - test cases that runs quickly - performance test cases - test cases that depend on specific drivers - logging or dump related test cases Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2019-01-18 17:40:44 +00:00
test: skip meson dependency checks if not required Don't need to check dependencies if test apps will not be built anyway. Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Aaron Conole <aconole@redhat.com> Acked-by: Luca Boccassi <bluca@debian.org>
2019-05-30 12:38:36 +00:00
foreach arg : dump_test_names
test(arg, dpdk_test,
env : ['DPDK_TEST=' + arg],
test: load drivers when required Concatenating to test_args if event_eth_tx_adapter_autotest is executed makes all subsequent tests inherit from the drivers loading while this is unneeded. Fixes: 207b1c813f39 ("test: fix build without ring PMD") Cc: stable@dpdk.org Signed-off-by: David Marchand <david.marchand@redhat.com> Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com> Acked-by: Aaron Conole <aconole@redhat.com>
2020-03-23 19:59:22 +00:00
args : default_test_args,
test: skip meson dependency checks if not required Don't need to check dependencies if test apps will not be built anyway. Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Aaron Conole <aconole@redhat.com> Acked-by: Luca Boccassi <bluca@debian.org>
2019-05-30 12:38:36 +00:00
timeout : timeout_seconds,
is_parallel : false,
suite : 'debug-tests')
endforeach
Reference in New Issue Copy Permalink