numam-dpdk/app/test-crypto-perf/cperf_ops.c

566 lines
16 KiB
C
Raw Normal View History

app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/*-
* BSD LICENSE
*
* Copyright(c) 2016-2017 Intel Corporation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <rte_cryptodev.h>
#include "cperf_ops.h"
#include "cperf_test_vectors.h"
static int
cperf_set_ops_null_cipher(struct rte_crypto_op **ops,
struct rte_mbuf **bufs_in, struct rte_mbuf **bufs_out,
uint16_t nb_ops, struct rte_cryptodev_sym_session *sess,
const struct cperf_options *options,
const struct cperf_test_vector *test_vector __rte_unused,
uint16_t iv_offset __rte_unused)
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
{
uint16_t i;
for (i = 0; i < nb_ops; i++) {
struct rte_crypto_sym_op *sym_op = ops[i]->sym;
rte_crypto_op_attach_sym_session(ops[i], sess);
sym_op->m_src = bufs_in[i];
sym_op->m_dst = bufs_out[i];
/* cipher parameters */
sym_op->cipher.data.length = options->test_buffer_size;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
sym_op->cipher.data.offset = 0;
}
return 0;
}
static int
cperf_set_ops_null_auth(struct rte_crypto_op **ops,
struct rte_mbuf **bufs_in, struct rte_mbuf **bufs_out,
uint16_t nb_ops, struct rte_cryptodev_sym_session *sess,
const struct cperf_options *options,
const struct cperf_test_vector *test_vector __rte_unused,
uint16_t iv_offset __rte_unused)
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
{
uint16_t i;
for (i = 0; i < nb_ops; i++) {
struct rte_crypto_sym_op *sym_op = ops[i]->sym;
rte_crypto_op_attach_sym_session(ops[i], sess);
sym_op->m_src = bufs_in[i];
sym_op->m_dst = bufs_out[i];
/* auth parameters */
sym_op->auth.data.length = options->test_buffer_size;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
sym_op->auth.data.offset = 0;
}
return 0;
}
static int
cperf_set_ops_cipher(struct rte_crypto_op **ops,
struct rte_mbuf **bufs_in, struct rte_mbuf **bufs_out,
uint16_t nb_ops, struct rte_cryptodev_sym_session *sess,
const struct cperf_options *options,
const struct cperf_test_vector *test_vector,
uint16_t iv_offset)
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
{
uint16_t i;
for (i = 0; i < nb_ops; i++) {
struct rte_crypto_sym_op *sym_op = ops[i]->sym;
rte_crypto_op_attach_sym_session(ops[i], sess);
sym_op->m_src = bufs_in[i];
sym_op->m_dst = bufs_out[i];
/* cipher parameters */
if (options->cipher_algo == RTE_CRYPTO_CIPHER_SNOW3G_UEA2 ||
options->cipher_algo == RTE_CRYPTO_CIPHER_KASUMI_F8 ||
options->cipher_algo == RTE_CRYPTO_CIPHER_ZUC_EEA3)
sym_op->cipher.data.length = options->test_buffer_size << 3;
else
sym_op->cipher.data.length = options->test_buffer_size;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
sym_op->cipher.data.offset = 0;
}
if (options->test == CPERF_TEST_TYPE_VERIFY) {
for (i = 0; i < nb_ops; i++) {
uint8_t *iv_ptr = rte_crypto_op_ctod_offset(ops[i],
uint8_t *, iv_offset);
memcpy(iv_ptr, test_vector->cipher_iv.data,
test_vector->cipher_iv.length);
}
}
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
return 0;
}
static int
cperf_set_ops_auth(struct rte_crypto_op **ops,
struct rte_mbuf **bufs_in, struct rte_mbuf **bufs_out,
uint16_t nb_ops, struct rte_cryptodev_sym_session *sess,
const struct cperf_options *options,
const struct cperf_test_vector *test_vector,
uint16_t iv_offset)
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
{
uint16_t i;
for (i = 0; i < nb_ops; i++) {
struct rte_crypto_sym_op *sym_op = ops[i]->sym;
rte_crypto_op_attach_sym_session(ops[i], sess);
sym_op->m_src = bufs_in[i];
sym_op->m_dst = bufs_out[i];
if (test_vector->auth_iv.length) {
uint8_t *iv_ptr = rte_crypto_op_ctod_offset(ops[i],
uint8_t *,
iv_offset);
memcpy(iv_ptr, test_vector->auth_iv.data,
test_vector->auth_iv.length);
}
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/* authentication parameters */
if (options->auth_op == RTE_CRYPTO_AUTH_OP_VERIFY) {
sym_op->auth.digest.data = test_vector->digest.data;
sym_op->auth.digest.phys_addr =
test_vector->digest.phys_addr;
} else {
uint32_t offset = options->test_buffer_size;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
struct rte_mbuf *buf, *tbuf;
if (options->out_of_place) {
buf = bufs_out[i];
} else {
tbuf = bufs_in[i];
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
while ((tbuf->next != NULL) &&
(offset >= tbuf->data_len)) {
offset -= tbuf->data_len;
tbuf = tbuf->next;
}
buf = tbuf;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
sym_op->auth.digest.data = rte_pktmbuf_mtod_offset(buf,
uint8_t *, offset);
sym_op->auth.digest.phys_addr =
rte_pktmbuf_mtophys_offset(buf, offset);
}
if (options->auth_algo == RTE_CRYPTO_AUTH_SNOW3G_UIA2 ||
options->auth_algo == RTE_CRYPTO_AUTH_KASUMI_F9 ||
options->auth_algo == RTE_CRYPTO_AUTH_ZUC_EIA3)
sym_op->auth.data.length = options->test_buffer_size << 3;
else
sym_op->auth.data.length = options->test_buffer_size;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
sym_op->auth.data.offset = 0;
}
if (options->test == CPERF_TEST_TYPE_VERIFY) {
if (test_vector->auth_iv.length) {
for (i = 0; i < nb_ops; i++) {
uint8_t *iv_ptr = rte_crypto_op_ctod_offset(ops[i],
uint8_t *, iv_offset);
memcpy(iv_ptr, test_vector->auth_iv.data,
test_vector->auth_iv.length);
}
}
}
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
return 0;
}
static int
cperf_set_ops_cipher_auth(struct rte_crypto_op **ops,
struct rte_mbuf **bufs_in, struct rte_mbuf **bufs_out,
uint16_t nb_ops, struct rte_cryptodev_sym_session *sess,
const struct cperf_options *options,
const struct cperf_test_vector *test_vector,
uint16_t iv_offset)
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
{
uint16_t i;
for (i = 0; i < nb_ops; i++) {
struct rte_crypto_sym_op *sym_op = ops[i]->sym;
rte_crypto_op_attach_sym_session(ops[i], sess);
sym_op->m_src = bufs_in[i];
sym_op->m_dst = bufs_out[i];
/* cipher parameters */
if (options->cipher_algo == RTE_CRYPTO_CIPHER_SNOW3G_UEA2 ||
options->cipher_algo == RTE_CRYPTO_CIPHER_KASUMI_F8 ||
options->cipher_algo == RTE_CRYPTO_CIPHER_ZUC_EEA3)
sym_op->cipher.data.length = options->test_buffer_size << 3;
else
sym_op->cipher.data.length = options->test_buffer_size;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
sym_op->cipher.data.offset = 0;
/* authentication parameters */
if (options->auth_op == RTE_CRYPTO_AUTH_OP_VERIFY) {
sym_op->auth.digest.data = test_vector->digest.data;
sym_op->auth.digest.phys_addr =
test_vector->digest.phys_addr;
} else {
uint32_t offset = options->test_buffer_size;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
struct rte_mbuf *buf, *tbuf;
if (options->out_of_place) {
buf = bufs_out[i];
} else {
tbuf = bufs_in[i];
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
while ((tbuf->next != NULL) &&
(offset >= tbuf->data_len)) {
offset -= tbuf->data_len;
tbuf = tbuf->next;
}
buf = tbuf;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
sym_op->auth.digest.data = rte_pktmbuf_mtod_offset(buf,
uint8_t *, offset);
sym_op->auth.digest.phys_addr =
rte_pktmbuf_mtophys_offset(buf, offset);
}
if (options->auth_algo == RTE_CRYPTO_AUTH_SNOW3G_UIA2 ||
options->auth_algo == RTE_CRYPTO_AUTH_KASUMI_F9 ||
options->auth_algo == RTE_CRYPTO_AUTH_ZUC_EIA3)
sym_op->auth.data.length = options->test_buffer_size << 3;
else
sym_op->auth.data.length = options->test_buffer_size;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
sym_op->auth.data.offset = 0;
}
if (options->test == CPERF_TEST_TYPE_VERIFY) {
for (i = 0; i < nb_ops; i++) {
uint8_t *iv_ptr = rte_crypto_op_ctod_offset(ops[i],
uint8_t *, iv_offset);
memcpy(iv_ptr, test_vector->cipher_iv.data,
test_vector->cipher_iv.length);
if (test_vector->auth_iv.length) {
/*
* Copy IV after the crypto operation and
* the cipher IV
*/
iv_ptr += test_vector->cipher_iv.length;
memcpy(iv_ptr, test_vector->auth_iv.data,
test_vector->auth_iv.length);
}
}
}
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
return 0;
}
static int
cperf_set_ops_aead(struct rte_crypto_op **ops,
struct rte_mbuf **bufs_in, struct rte_mbuf **bufs_out,
uint16_t nb_ops, struct rte_cryptodev_sym_session *sess,
const struct cperf_options *options,
const struct cperf_test_vector *test_vector,
uint16_t iv_offset)
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
{
uint16_t i;
uint16_t aad_offset = iv_offset +
RTE_ALIGN_CEIL(test_vector->aead_iv.length, 16);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
for (i = 0; i < nb_ops; i++) {
struct rte_crypto_sym_op *sym_op = ops[i]->sym;
rte_crypto_op_attach_sym_session(ops[i], sess);
sym_op->m_src = bufs_in[i];
sym_op->m_dst = bufs_out[i];
/* AEAD parameters */
sym_op->aead.data.length = options->test_buffer_size;
sym_op->aead.data.offset = 0;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
sym_op->aead.aad.data = rte_crypto_op_ctod_offset(ops[i],
uint8_t *, aad_offset);
sym_op->aead.aad.phys_addr = rte_crypto_op_ctophys_offset(ops[i],
aad_offset);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
if (options->aead_op == RTE_CRYPTO_AEAD_OP_DECRYPT) {
sym_op->aead.digest.data = test_vector->digest.data;
sym_op->aead.digest.phys_addr =
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
test_vector->digest.phys_addr;
} else {
uint32_t offset = sym_op->aead.data.length +
sym_op->aead.data.offset;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
struct rte_mbuf *buf, *tbuf;
if (options->out_of_place) {
buf = bufs_out[i];
} else {
tbuf = bufs_in[i];
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
while ((tbuf->next != NULL) &&
(offset >= tbuf->data_len)) {
offset -= tbuf->data_len;
tbuf = tbuf->next;
}
buf = tbuf;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
sym_op->aead.digest.data = rte_pktmbuf_mtod_offset(buf,
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
uint8_t *, offset);
sym_op->aead.digest.phys_addr =
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
rte_pktmbuf_mtophys_offset(buf, offset);
}
}
if (options->test == CPERF_TEST_TYPE_VERIFY) {
for (i = 0; i < nb_ops; i++) {
uint8_t *iv_ptr = rte_crypto_op_ctod_offset(ops[i],
uint8_t *, iv_offset);
memcpy(iv_ptr, test_vector->aead_iv.data,
test_vector->aead_iv.length);
/* Copy AAD after the IV */
memcpy(ops[i]->sym->aead.aad.data,
test_vector->aad.data,
test_vector->aad.length);
}
}
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
return 0;
}
static struct rte_cryptodev_sym_session *
cperf_create_session(struct rte_mempool *sess_mp,
uint8_t dev_id,
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
const struct cperf_options *options,
const struct cperf_test_vector *test_vector,
uint16_t iv_offset)
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
{
struct rte_crypto_sym_xform cipher_xform;
struct rte_crypto_sym_xform auth_xform;
struct rte_crypto_sym_xform aead_xform;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
struct rte_cryptodev_sym_session *sess = NULL;
sess = rte_cryptodev_sym_session_create(sess_mp);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/*
* cipher only
*/
if (options->op_type == CPERF_CIPHER_ONLY) {
cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
cipher_xform.next = NULL;
cipher_xform.cipher.algo = options->cipher_algo;
cipher_xform.cipher.op = options->cipher_op;
cipher_xform.cipher.iv.offset = iv_offset;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/* cipher different than null */
if (options->cipher_algo != RTE_CRYPTO_CIPHER_NULL) {
cipher_xform.cipher.key.data =
test_vector->cipher_key.data;
cipher_xform.cipher.key.length =
test_vector->cipher_key.length;
cipher_xform.cipher.iv.length =
test_vector->cipher_iv.length;
} else {
cipher_xform.cipher.key.data = NULL;
cipher_xform.cipher.key.length = 0;
cipher_xform.cipher.iv.length = 0;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
/* create crypto session */
rte_cryptodev_sym_session_init(dev_id, sess, &cipher_xform,
sess_mp);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/*
* auth only
*/
} else if (options->op_type == CPERF_AUTH_ONLY) {
auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
auth_xform.next = NULL;
auth_xform.auth.algo = options->auth_algo;
auth_xform.auth.op = options->auth_op;
/* auth different than null */
if (options->auth_algo != RTE_CRYPTO_AUTH_NULL) {
auth_xform.auth.digest_length =
options->digest_sz;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
auth_xform.auth.key.length =
test_vector->auth_key.length;
auth_xform.auth.key.data = test_vector->auth_key.data;
auth_xform.auth.iv.length =
test_vector->auth_iv.length;
} else {
auth_xform.auth.digest_length = 0;
auth_xform.auth.key.length = 0;
auth_xform.auth.key.data = NULL;
auth_xform.auth.iv.length = 0;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
/* create crypto session */
rte_cryptodev_sym_session_init(dev_id, sess, &auth_xform,
sess_mp);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/*
* cipher and auth
*/
} else if (options->op_type == CPERF_CIPHER_THEN_AUTH
|| options->op_type == CPERF_AUTH_THEN_CIPHER) {
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/*
* cipher
*/
cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
cipher_xform.next = NULL;
cipher_xform.cipher.algo = options->cipher_algo;
cipher_xform.cipher.op = options->cipher_op;
cipher_xform.cipher.iv.offset = iv_offset;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/* cipher different than null */
if (options->cipher_algo != RTE_CRYPTO_CIPHER_NULL) {
cipher_xform.cipher.key.data =
test_vector->cipher_key.data;
cipher_xform.cipher.key.length =
test_vector->cipher_key.length;
cipher_xform.cipher.iv.length =
test_vector->cipher_iv.length;
} else {
cipher_xform.cipher.key.data = NULL;
cipher_xform.cipher.key.length = 0;
cipher_xform.cipher.iv.length = 0;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
/*
* auth
*/
auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
auth_xform.next = NULL;
auth_xform.auth.algo = options->auth_algo;
auth_xform.auth.op = options->auth_op;
/* auth different than null */
if (options->auth_algo != RTE_CRYPTO_AUTH_NULL) {
auth_xform.auth.digest_length = options->digest_sz;
auth_xform.auth.iv.length = test_vector->auth_iv.length;
auth_xform.auth.key.length =
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
test_vector->auth_key.length;
auth_xform.auth.key.data =
test_vector->auth_key.data;
} else {
auth_xform.auth.digest_length = 0;
auth_xform.auth.key.length = 0;
auth_xform.auth.key.data = NULL;
auth_xform.auth.iv.length = 0;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
/* cipher then auth */
if (options->op_type == CPERF_CIPHER_THEN_AUTH) {
cipher_xform.next = &auth_xform;
/* create crypto session */
rte_cryptodev_sym_session_init(dev_id,
sess, &cipher_xform, sess_mp);
} else { /* auth then cipher */
auth_xform.next = &cipher_xform;
/* create crypto session */
rte_cryptodev_sym_session_init(dev_id,
sess, &auth_xform, sess_mp);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
} else { /* options->op_type == CPERF_AEAD */
aead_xform.type = RTE_CRYPTO_SYM_XFORM_AEAD;
aead_xform.next = NULL;
aead_xform.aead.algo = options->aead_algo;
aead_xform.aead.op = options->aead_op;
aead_xform.aead.iv.offset = iv_offset;
aead_xform.aead.key.data =
test_vector->aead_key.data;
aead_xform.aead.key.length =
test_vector->aead_key.length;
aead_xform.aead.iv.length = test_vector->aead_iv.length;
aead_xform.aead.digest_length = options->digest_sz;
aead_xform.aead.aad_length =
options->aead_aad_sz;
/* Create crypto session */
rte_cryptodev_sym_session_init(dev_id,
sess, &aead_xform, sess_mp);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
return sess;
}
int
cperf_get_op_functions(const struct cperf_options *options,
struct cperf_op_fns *op_fns)
{
memset(op_fns, 0, sizeof(struct cperf_op_fns));
op_fns->sess_create = cperf_create_session;
if (options->op_type == CPERF_AEAD) {
op_fns->populate_ops = cperf_set_ops_aead;
return 0;
}
if (options->op_type == CPERF_AUTH_THEN_CIPHER
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
|| options->op_type == CPERF_CIPHER_THEN_AUTH) {
op_fns->populate_ops = cperf_set_ops_cipher_auth;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
return 0;
}
if (options->op_type == CPERF_AUTH_ONLY) {
if (options->auth_algo == RTE_CRYPTO_AUTH_NULL)
op_fns->populate_ops = cperf_set_ops_null_auth;
else
op_fns->populate_ops = cperf_set_ops_auth;
return 0;
}
if (options->op_type == CPERF_CIPHER_ONLY) {
if (options->cipher_algo == RTE_CRYPTO_CIPHER_NULL)
op_fns->populate_ops = cperf_set_ops_null_cipher;
else
op_fns->populate_ops = cperf_set_ops_cipher;
return 0;
}
return -1;
}