numam-dpdk/examples/ip_fragmentation/main.c

961 lines
24 KiB
C
Raw Normal View History

/*-
* BSD LICENSE
*
* Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <inttypes.h>
#include <sys/types.h>
#include <sys/param.h>
#include <string.h>
#include <sys/queue.h>
#include <stdarg.h>
#include <errno.h>
#include <getopt.h>
#include <rte_common.h>
#include <rte_byteorder.h>
#include <rte_log.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
#include <rte_memzone.h>
#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_launch.h>
#include <rte_atomic.h>
#include <rte_cycles.h>
#include <rte_prefetch.h>
#include <rte_lcore.h>
#include <rte_per_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_interrupts.h>
#include <rte_pci.h>
#include <rte_random.h>
#include <rte_debug.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_ring.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
#include <rte_lpm.h>
#include <rte_lpm6.h>
#include <rte_ip.h>
#include <rte_string_fns.h>
#include <rte_ip_frag.h>
#define RTE_LOGTYPE_IP_FRAG RTE_LOGTYPE_USER1
/* allow max jumbo frame 9.5 KB */
#define JUMBO_FRAME_MAX_SIZE 0x2600
#define ROUNDUP_DIV(a, b) (((a) + (b) - 1) / (b))
/*
* Default byte size for the IPv6 Maximum Transfer Unit (MTU).
* This value includes the size of IPv6 header.
*/
#define IPV4_MTU_DEFAULT ETHER_MTU
#define IPV6_MTU_DEFAULT ETHER_MTU
/*
* Default payload in bytes for the IPv6 packet.
*/
#define IPV4_DEFAULT_PAYLOAD (IPV4_MTU_DEFAULT - sizeof(struct ipv4_hdr))
#define IPV6_DEFAULT_PAYLOAD (IPV6_MTU_DEFAULT - sizeof(struct ipv6_hdr))
/*
* Max number of fragments per packet expected - defined by config file.
*/
#define MAX_PACKET_FRAG RTE_LIBRTE_IP_FRAG_MAX_FRAG
#define NB_MBUF 8192
#define MAX_PKT_BURST 32
#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
/* Configure how many packets ahead to prefetch, when reading packets */
#define PREFETCH_OFFSET 3
/*
* Configurable number of RX/TX ring descriptors
*/
#define RTE_TEST_RX_DESC_DEFAULT 128
#define RTE_TEST_TX_DESC_DEFAULT 512
static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
/* ethernet addresses of ports */
static struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
#ifndef IPv4_BYTES
#define IPv4_BYTES_FMT "%" PRIu8 ".%" PRIu8 ".%" PRIu8 ".%" PRIu8
#define IPv4_BYTES(addr) \
(uint8_t) (((addr) >> 24) & 0xFF),\
(uint8_t) (((addr) >> 16) & 0xFF),\
(uint8_t) (((addr) >> 8) & 0xFF),\
(uint8_t) ((addr) & 0xFF)
#endif
#ifndef IPv6_BYTES
#define IPv6_BYTES_FMT "%02x%02x:%02x%02x:%02x%02x:%02x%02x:"\
"%02x%02x:%02x%02x:%02x%02x:%02x%02x"
#define IPv6_BYTES(addr) \
addr[0], addr[1], addr[2], addr[3], \
addr[4], addr[5], addr[6], addr[7], \
addr[8], addr[9], addr[10], addr[11],\
addr[12], addr[13],addr[14], addr[15]
#endif
#define IPV6_ADDR_LEN 16
/* mask of enabled ports */
static int enabled_port_mask = 0;
static int rx_queue_per_lcore = 1;
#define MBUF_TABLE_SIZE (2 * MAX(MAX_PKT_BURST, MAX_PACKET_FRAG))
struct mbuf_table {
uint16_t len;
struct rte_mbuf *m_table[MBUF_TABLE_SIZE];
};
struct rx_queue {
struct rte_mempool *direct_pool;
struct rte_mempool *indirect_pool;
struct rte_lpm *lpm;
struct rte_lpm6 *lpm6;
uint8_t portid;
};
#define MAX_RX_QUEUE_PER_LCORE 16
#define MAX_TX_QUEUE_PER_PORT 16
struct lcore_queue_conf {
uint16_t n_rx_queue;
uint16_t tx_queue_id[RTE_MAX_ETHPORTS];
struct rx_queue rx_queue_list[MAX_RX_QUEUE_PER_LCORE];
struct mbuf_table tx_mbufs[RTE_MAX_ETHPORTS];
} __rte_cache_aligned;
struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
static const struct rte_eth_conf port_conf = {
.rxmode = {
.max_rx_pkt_len = JUMBO_FRAME_MAX_SIZE,
.split_hdr_size = 0,
.header_split = 0, /**< Header Split disabled */
.hw_ip_checksum = 1, /**< IP checksum offload enabled */
.hw_vlan_filter = 0, /**< VLAN filtering disabled */
.jumbo_frame = 1, /**< Jumbo Frame Support enabled */
.hw_strip_crc = 0, /**< CRC stripped by hardware */
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
},
};
/*
* IPv4 forwarding table
*/
struct l3fwd_ipv4_route {
uint32_t ip;
uint8_t depth;
uint8_t if_out;
};
struct l3fwd_ipv4_route l3fwd_ipv4_route_array[] = {
{IPv4(100,10,0,0), 16, 0},
{IPv4(100,20,0,0), 16, 1},
{IPv4(100,30,0,0), 16, 2},
{IPv4(100,40,0,0), 16, 3},
{IPv4(100,50,0,0), 16, 4},
{IPv4(100,60,0,0), 16, 5},
{IPv4(100,70,0,0), 16, 6},
{IPv4(100,80,0,0), 16, 7},
};
/*
* IPv6 forwarding table
*/
struct l3fwd_ipv6_route {
uint8_t ip[IPV6_ADDR_LEN];
uint8_t depth;
uint8_t if_out;
};
static struct l3fwd_ipv6_route l3fwd_ipv6_route_array[] = {
{{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 0},
{{2,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 1},
{{3,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 2},
{{4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 3},
{{5,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 4},
{{6,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 5},
{{7,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 6},
{{8,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}, 48, 7},
};
#define LPM_MAX_RULES 1024
#define LPM6_MAX_RULES 1024
#define LPM6_NUMBER_TBL8S (1 << 16)
struct rte_lpm6_config lpm6_config = {
.max_rules = LPM6_MAX_RULES,
.number_tbl8s = LPM6_NUMBER_TBL8S,
.flags = 0
};
static struct rte_mempool *socket_direct_pool[RTE_MAX_NUMA_NODES];
static struct rte_mempool *socket_indirect_pool[RTE_MAX_NUMA_NODES];
static struct rte_lpm *socket_lpm[RTE_MAX_NUMA_NODES];
static struct rte_lpm6 *socket_lpm6[RTE_MAX_NUMA_NODES];
/* Send burst of packets on an output interface */
static inline int
send_burst(struct lcore_queue_conf *qconf, uint16_t n, uint8_t port)
{
struct rte_mbuf **m_table;
int ret;
uint16_t queueid;
queueid = qconf->tx_queue_id[port];
m_table = (struct rte_mbuf **)qconf->tx_mbufs[port].m_table;
ret = rte_eth_tx_burst(port, queueid, m_table, n);
if (unlikely(ret < n)) {
do {
rte_pktmbuf_free(m_table[ret]);
} while (++ret < n);
}
return 0;
}
static inline void
l3fwd_simple_forward(struct rte_mbuf *m, struct lcore_queue_conf *qconf,
uint8_t queueid, uint8_t port_in)
{
struct rx_queue *rxq;
uint32_t i, len, next_hop_ipv4;
uint8_t next_hop_ipv6, port_out, ipv6;
int32_t len2;
ipv6 = 0;
rxq = &qconf->rx_queue_list[queueid];
/* by default, send everything back to the source port */
port_out = port_in;
/* Remove the Ethernet header and trailer from the input packet */
rte_pktmbuf_adj(m, (uint16_t)sizeof(struct ether_hdr));
/* Build transmission burst */
len = qconf->tx_mbufs[port_out].len;
/* if this is an IPv4 packet */
if (RTE_ETH_IS_IPV4_HDR(m->packet_type)) {
struct ipv4_hdr *ip_hdr;
uint32_t ip_dst;
/* Read the lookup key (i.e. ip_dst) from the input packet */
ip_hdr = rte_pktmbuf_mtod(m, struct ipv4_hdr *);
ip_dst = rte_be_to_cpu_32(ip_hdr->dst_addr);
/* Find destination port */
if (rte_lpm_lookup(rxq->lpm, ip_dst, &next_hop_ipv4) == 0 &&
(enabled_port_mask & 1 << next_hop_ipv4) != 0) {
port_out = next_hop_ipv4;
/* Build transmission burst for new port */
len = qconf->tx_mbufs[port_out].len;
}
/* if we don't need to do any fragmentation */
if (likely (IPV4_MTU_DEFAULT >= m->pkt_len)) {
qconf->tx_mbufs[port_out].m_table[len] = m;
len2 = 1;
} else {
len2 = rte_ipv4_fragment_packet(m,
&qconf->tx_mbufs[port_out].m_table[len],
(uint16_t)(MBUF_TABLE_SIZE - len),
IPV4_MTU_DEFAULT,
rxq->direct_pool, rxq->indirect_pool);
/* Free input packet */
rte_pktmbuf_free(m);
/* If we fail to fragment the packet */
if (unlikely (len2 < 0))
return;
}
} else if (RTE_ETH_IS_IPV6_HDR(m->packet_type)) {
/* if this is an IPv6 packet */
struct ipv6_hdr *ip_hdr;
ipv6 = 1;
/* Read the lookup key (i.e. ip_dst) from the input packet */
ip_hdr = rte_pktmbuf_mtod(m, struct ipv6_hdr *);
/* Find destination port */
if (rte_lpm6_lookup(rxq->lpm6, ip_hdr->dst_addr, &next_hop_ipv6) == 0 &&
(enabled_port_mask & 1 << next_hop_ipv6) != 0) {
port_out = next_hop_ipv6;
/* Build transmission burst for new port */
len = qconf->tx_mbufs[port_out].len;
}
/* if we don't need to do any fragmentation */
if (likely (IPV6_MTU_DEFAULT >= m->pkt_len)) {
qconf->tx_mbufs[port_out].m_table[len] = m;
len2 = 1;
} else {
len2 = rte_ipv6_fragment_packet(m,
&qconf->tx_mbufs[port_out].m_table[len],
(uint16_t)(MBUF_TABLE_SIZE - len),
IPV6_MTU_DEFAULT,
rxq->direct_pool, rxq->indirect_pool);
/* Free input packet */
rte_pktmbuf_free(m);
/* If we fail to fragment the packet */
if (unlikely (len2 < 0))
return;
}
}
/* else, just forward the packet */
else {
qconf->tx_mbufs[port_out].m_table[len] = m;
len2 = 1;
}
for (i = len; i < len + len2; i ++) {
void *d_addr_bytes;
m = qconf->tx_mbufs[port_out].m_table[i];
struct ether_hdr *eth_hdr = (struct ether_hdr *)
rte_pktmbuf_prepend(m, (uint16_t)sizeof(struct ether_hdr));
if (eth_hdr == NULL) {
rte_panic("No headroom in mbuf.\n");
}
mbuf: flatten struct vlan_macip The vlan_macip structure combined a vlan tag id with l2 and l3 headers lengths for tracking offloads. However, this structure was only used as a unit by the e1000 and ixgbe drivers, not generally. This patch removes the structure from the mbuf header and places the fields into the mbuf structure directly at the required point, without any net effect on the structure layout. This allows us to treat the vlan tags and header length fields as separate for future mbuf changes. The drivers which were written to use the combined structure still do so, using a driver-local definition of it. Reduce perf regression caused by splitting vlan_macip field. This is done by providing a single uint16_t value to allow writing/clearing the l2 and l3 lengths together. There is still a small perf hit to the slow path TX due to the reads from vlan_tci and l2/l3 lengths being separated. (<5% in my tests with testpmd with no extra params). Unfortunately, this cannot be eliminated, without restoring the vlan tags and l2/l3 lengths as a combined 32-bit field. This would prevent us from ever looking to move those fields about and is an artificial tie that applies only for performance in igb and ixgbe drivers. Therefore, this patch keeps the vlan_tci field separate from the lengths as the best solution going forward. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2014-09-09 14:40:56 +00:00
m->l2_len = sizeof(struct ether_hdr);
/* 02:00:00:00:00:xx */
d_addr_bytes = &eth_hdr->d_addr.addr_bytes[0];
*((uint64_t *)d_addr_bytes) = 0x000000000002 + ((uint64_t)port_out << 40);
/* src addr */
ether_addr_copy(&ports_eth_addr[port_out], &eth_hdr->s_addr);
if (ipv6)
eth_hdr->ether_type = rte_be_to_cpu_16(ETHER_TYPE_IPv6);
else
eth_hdr->ether_type = rte_be_to_cpu_16(ETHER_TYPE_IPv4);
}
len += len2;
if (likely(len < MAX_PKT_BURST)) {
qconf->tx_mbufs[port_out].len = (uint16_t)len;
return;
}
/* Transmit packets */
send_burst(qconf, (uint16_t)len, port_out);
qconf->tx_mbufs[port_out].len = 0;
}
/* main processing loop */
static int
main_loop(__attribute__((unused)) void *dummy)
{
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
unsigned lcore_id;
uint64_t prev_tsc, diff_tsc, cur_tsc;
int i, j, nb_rx;
uint8_t portid;
struct lcore_queue_conf *qconf;
const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
prev_tsc = 0;
lcore_id = rte_lcore_id();
qconf = &lcore_queue_conf[lcore_id];
if (qconf->n_rx_queue == 0) {
RTE_LOG(INFO, IP_FRAG, "lcore %u has nothing to do\n", lcore_id);
return 0;
}
RTE_LOG(INFO, IP_FRAG, "entering main loop on lcore %u\n", lcore_id);
for (i = 0; i < qconf->n_rx_queue; i++) {
portid = qconf->rx_queue_list[i].portid;
RTE_LOG(INFO, IP_FRAG, " -- lcoreid=%u portid=%d\n", lcore_id,
(int) portid);
}
while (1) {
cur_tsc = rte_rdtsc();
/*
* TX burst queue drain
*/
diff_tsc = cur_tsc - prev_tsc;
if (unlikely(diff_tsc > drain_tsc)) {
/*
* This could be optimized (use queueid instead of
* portid), but it is not called so often
*/
for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
if (qconf->tx_mbufs[portid].len == 0)
continue;
send_burst(&lcore_queue_conf[lcore_id],
qconf->tx_mbufs[portid].len,
portid);
qconf->tx_mbufs[portid].len = 0;
}
prev_tsc = cur_tsc;
}
/*
* Read packet from RX queues
*/
for (i = 0; i < qconf->n_rx_queue; i++) {
portid = qconf->rx_queue_list[i].portid;
nb_rx = rte_eth_rx_burst(portid, 0, pkts_burst,
MAX_PKT_BURST);
/* Prefetch first packets */
for (j = 0; j < PREFETCH_OFFSET && j < nb_rx; j++) {
rte_prefetch0(rte_pktmbuf_mtod(
pkts_burst[j], void *));
}
/* Prefetch and forward already prefetched packets */
for (j = 0; j < (nb_rx - PREFETCH_OFFSET); j++) {
rte_prefetch0(rte_pktmbuf_mtod(pkts_burst[
j + PREFETCH_OFFSET], void *));
l3fwd_simple_forward(pkts_burst[j], qconf, i, portid);
}
/* Forward remaining prefetched packets */
for (; j < nb_rx; j++) {
l3fwd_simple_forward(pkts_burst[j], qconf, i, portid);
}
}
}
}
/* display usage */
static void
print_usage(const char *prgname)
{
printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
" -p PORTMASK: hexadecimal bitmask of ports to configure\n"
" -q NQ: number of queue (=ports) per lcore (default is 1)\n",
prgname);
}
static int
parse_portmask(const char *portmask)
{
char *end = NULL;
unsigned long pm;
/* parse hexadecimal string */
pm = strtoul(portmask, &end, 16);
if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
return -1;
if (pm == 0)
return -1;
return pm;
}
static int
parse_nqueue(const char *q_arg)
{
char *end = NULL;
unsigned long n;
/* parse hexadecimal string */
n = strtoul(q_arg, &end, 10);
if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
return -1;
if (n == 0)
return -1;
if (n >= MAX_RX_QUEUE_PER_LCORE)
return -1;
return n;
}
/* Parse the argument given in the command line of the application */
static int
parse_args(int argc, char **argv)
{
int opt, ret;
char **argvopt;
int option_index;
char *prgname = argv[0];
static struct option lgopts[] = {
{NULL, 0, 0, 0}
};
argvopt = argv;
while ((opt = getopt_long(argc, argvopt, "p:q:",
lgopts, &option_index)) != EOF) {
switch (opt) {
/* portmask */
case 'p':
enabled_port_mask = parse_portmask(optarg);
if (enabled_port_mask < 0) {
printf("invalid portmask\n");
print_usage(prgname);
return -1;
}
break;
/* nqueue */
case 'q':
rx_queue_per_lcore = parse_nqueue(optarg);
if (rx_queue_per_lcore < 0) {
printf("invalid queue number\n");
print_usage(prgname);
return -1;
}
break;
/* long options */
case 0:
print_usage(prgname);
return -1;
default:
print_usage(prgname);
return -1;
}
}
if (enabled_port_mask == 0) {
printf("portmask not specified\n");
print_usage(prgname);
return -1;
}
if (optind >= 0)
argv[optind-1] = prgname;
ret = optind-1;
optind = 0; /* reset getopt lib */
return ret;
}
static void
print_ethaddr(const char *name, struct ether_addr *eth_addr)
{
char buf[ETHER_ADDR_FMT_SIZE];
ether_format_addr(buf, ETHER_ADDR_FMT_SIZE, eth_addr);
printf("%s%s", name, buf);
}
/* Check the link status of all ports in up to 9s, and print them finally */
static void
check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
uint8_t portid, count, all_ports_up, print_flag = 0;
struct rte_eth_link link;
printf("\nChecking link status");
fflush(stdout);
for (count = 0; count <= MAX_CHECK_TIME; count++) {
all_ports_up = 1;
for (portid = 0; portid < port_num; portid++) {
if ((port_mask & (1 << portid)) == 0)
continue;
memset(&link, 0, sizeof(link));
rte_eth_link_get_nowait(portid, &link);
/* print link status if flag set */
if (print_flag == 1) {
if (link.link_status)
printf("Port %d Link Up - speed %u "
"Mbps - %s\n", (uint8_t)portid,
(unsigned)link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
("full-duplex") : ("half-duplex\n"));
else
printf("Port %d Link Down\n",
(uint8_t)portid);
continue;
}
/* clear all_ports_up flag if any link down */
if (link.link_status == 0) {
all_ports_up = 0;
break;
}
}
/* after finally printing all link status, get out */
if (print_flag == 1)
break;
if (all_ports_up == 0) {
printf(".");
fflush(stdout);
rte_delay_ms(CHECK_INTERVAL);
}
/* set the print_flag if all ports up or timeout */
if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
print_flag = 1;
printf("\ndone\n");
}
}
}
static int
init_routing_table(void)
{
struct rte_lpm *lpm;
struct rte_lpm6 *lpm6;
int socket, ret;
unsigned i;
for (socket = 0; socket < RTE_MAX_NUMA_NODES; socket++) {
if (socket_lpm[socket]) {
lpm = socket_lpm[socket];
/* populate the LPM table */
for (i = 0; i < RTE_DIM(l3fwd_ipv4_route_array); i++) {
ret = rte_lpm_add(lpm,
l3fwd_ipv4_route_array[i].ip,
l3fwd_ipv4_route_array[i].depth,
l3fwd_ipv4_route_array[i].if_out);
if (ret < 0) {
RTE_LOG(ERR, IP_FRAG, "Unable to add entry %i to the l3fwd "
"LPM table\n", i);
return -1;
}
RTE_LOG(INFO, IP_FRAG, "Socket %i: adding route " IPv4_BYTES_FMT
"/%d (port %d)\n",
socket,
IPv4_BYTES(l3fwd_ipv4_route_array[i].ip),
l3fwd_ipv4_route_array[i].depth,
l3fwd_ipv4_route_array[i].if_out);
}
}
if (socket_lpm6[socket]) {
lpm6 = socket_lpm6[socket];
/* populate the LPM6 table */
for (i = 0; i < RTE_DIM(l3fwd_ipv6_route_array); i++) {
ret = rte_lpm6_add(lpm6,
l3fwd_ipv6_route_array[i].ip,
l3fwd_ipv6_route_array[i].depth,
l3fwd_ipv6_route_array[i].if_out);
if (ret < 0) {
RTE_LOG(ERR, IP_FRAG, "Unable to add entry %i to the l3fwd "
"LPM6 table\n", i);
return -1;
}
RTE_LOG(INFO, IP_FRAG, "Socket %i: adding route " IPv6_BYTES_FMT
"/%d (port %d)\n",
socket,
IPv6_BYTES(l3fwd_ipv6_route_array[i].ip),
l3fwd_ipv6_route_array[i].depth,
l3fwd_ipv6_route_array[i].if_out);
}
}
}
return 0;
}
static int
init_mem(void)
{
char buf[PATH_MAX];
struct rte_mempool *mp;
struct rte_lpm *lpm;
struct rte_lpm6 *lpm6;
int socket;
unsigned lcore_id;
/* traverse through lcores and initialize structures on each socket */
for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
if (rte_lcore_is_enabled(lcore_id) == 0)
continue;
socket = rte_lcore_to_socket_id(lcore_id);
if (socket == SOCKET_ID_ANY)
socket = 0;
if (socket_direct_pool[socket] == NULL) {
RTE_LOG(INFO, IP_FRAG, "Creating direct mempool on socket %i\n",
socket);
snprintf(buf, sizeof(buf), "pool_direct_%i", socket);
mp = rte_pktmbuf_pool_create(buf, NB_MBUF, 32,
0, RTE_MBUF_DEFAULT_BUF_SIZE, socket);
if (mp == NULL) {
RTE_LOG(ERR, IP_FRAG, "Cannot create direct mempool\n");
return -1;
}
socket_direct_pool[socket] = mp;
}
if (socket_indirect_pool[socket] == NULL) {
RTE_LOG(INFO, IP_FRAG, "Creating indirect mempool on socket %i\n",
socket);
snprintf(buf, sizeof(buf), "pool_indirect_%i", socket);
mp = rte_pktmbuf_pool_create(buf, NB_MBUF, 32, 0, 0,
socket);
if (mp == NULL) {
RTE_LOG(ERR, IP_FRAG, "Cannot create indirect mempool\n");
return -1;
}
socket_indirect_pool[socket] = mp;
}
if (socket_lpm[socket] == NULL) {
RTE_LOG(INFO, IP_FRAG, "Creating LPM table on socket %i\n", socket);
snprintf(buf, sizeof(buf), "IP_FRAG_LPM_%i", socket);
lpm = rte_lpm_create(buf, socket, LPM_MAX_RULES, 0);
if (lpm == NULL) {
RTE_LOG(ERR, IP_FRAG, "Cannot create LPM table\n");
return -1;
}
socket_lpm[socket] = lpm;
}
if (socket_lpm6[socket] == NULL) {
RTE_LOG(INFO, IP_FRAG, "Creating LPM6 table on socket %i\n", socket);
snprintf(buf, sizeof(buf), "IP_FRAG_LPM_%i", socket);
lpm6 = rte_lpm6_create("IP_FRAG_LPM6", socket, &lpm6_config);
if (lpm6 == NULL) {
RTE_LOG(ERR, IP_FRAG, "Cannot create LPM table\n");
return -1;
}
socket_lpm6[socket] = lpm6;
}
}
return 0;
}
int
main(int argc, char **argv)
{
struct lcore_queue_conf *qconf;
struct rte_eth_dev_info dev_info;
struct rte_eth_txconf *txconf;
struct rx_queue *rxq;
int socket, ret;
unsigned nb_ports;
uint16_t queueid = 0;
unsigned lcore_id = 0, rx_lcore_id = 0;
uint32_t n_tx_queue, nb_lcores;
uint8_t portid;
/* init EAL */
ret = rte_eal_init(argc, argv);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eal_init failed");
argc -= ret;
argv += ret;
/* parse application arguments (after the EAL ones) */
ret = parse_args(argc, argv);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Invalid arguments");
nb_ports = rte_eth_dev_count();
if (nb_ports > RTE_MAX_ETHPORTS)
nb_ports = RTE_MAX_ETHPORTS;
else if (nb_ports == 0)
rte_exit(EXIT_FAILURE, "No ports found!\n");
nb_lcores = rte_lcore_count();
/* initialize structures (mempools, lpm etc.) */
if (init_mem() < 0)
rte_panic("Cannot initialize memory structures!\n");
/* check if portmask has non-existent ports */
if (enabled_port_mask & ~(RTE_LEN2MASK(nb_ports, unsigned)))
rte_exit(EXIT_FAILURE, "Non-existent ports in portmask!\n");
/* initialize all ports */
for (portid = 0; portid < nb_ports; portid++) {
/* skip ports that are not enabled */
if ((enabled_port_mask & (1 << portid)) == 0) {
printf("Skipping disabled port %d\n", portid);
continue;
}
qconf = &lcore_queue_conf[rx_lcore_id];
/* get the lcore_id for this port */
while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
qconf->n_rx_queue == (unsigned)rx_queue_per_lcore) {
rx_lcore_id ++;
if (rx_lcore_id >= RTE_MAX_LCORE)
rte_exit(EXIT_FAILURE, "Not enough cores\n");
qconf = &lcore_queue_conf[rx_lcore_id];
}
socket = (int) rte_lcore_to_socket_id(rx_lcore_id);
if (socket == SOCKET_ID_ANY)
socket = 0;
rxq = &qconf->rx_queue_list[qconf->n_rx_queue];
rxq->portid = portid;
rxq->direct_pool = socket_direct_pool[socket];
rxq->indirect_pool = socket_indirect_pool[socket];
rxq->lpm = socket_lpm[socket];
rxq->lpm6 = socket_lpm6[socket];
qconf->n_rx_queue++;
/* init port */
printf("Initializing port %d on lcore %u...", portid,
rx_lcore_id);
fflush(stdout);
n_tx_queue = nb_lcores;
if (n_tx_queue > MAX_TX_QUEUE_PER_PORT)
n_tx_queue = MAX_TX_QUEUE_PER_PORT;
ret = rte_eth_dev_configure(portid, 1, (uint16_t)n_tx_queue,
&port_conf);
if (ret < 0) {
printf("\n");
rte_exit(EXIT_FAILURE, "Cannot configure device: "
"err=%d, port=%d\n",
ret, portid);
}
/* init one RX queue */
ret = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
socket, NULL,
socket_direct_pool[socket]);
if (ret < 0) {
printf("\n");
rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup: "
"err=%d, port=%d\n",
ret, portid);
}
rte_eth_macaddr_get(portid, &ports_eth_addr[portid]);
print_ethaddr(" Address:", &ports_eth_addr[portid]);
printf("\n");
/* init one TX queue per couple (lcore,port) */
queueid = 0;
for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
if (rte_lcore_is_enabled(lcore_id) == 0)
continue;
socket = (int) rte_lcore_to_socket_id(lcore_id);
printf("txq=%u,%d ", lcore_id, queueid);
fflush(stdout);
rte_eth_dev_info_get(portid, &dev_info);
txconf = &dev_info.default_txconf;
txconf->txq_flags = 0;
ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
socket, txconf);
if (ret < 0) {
printf("\n");
rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: "
"err=%d, port=%d\n", ret, portid);
}
qconf = &lcore_queue_conf[lcore_id];
qconf->tx_queue_id[portid] = queueid;
queueid++;
}
printf("\n");
}
printf("\n");
/* start ports */
for (portid = 0; portid < nb_ports; portid++) {
if ((enabled_port_mask & (1 << portid)) == 0) {
continue;
}
/* Start device */
ret = rte_eth_dev_start(portid);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_dev_start: err=%d, port=%d\n",
ret, portid);
rte_eth_promiscuous_enable(portid);
}
if (init_routing_table() < 0)
rte_exit(EXIT_FAILURE, "Cannot init routing table\n");
check_all_ports_link_status((uint8_t)nb_ports, enabled_port_mask);
/* launch per-lcore init on every lcore */
rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);
RTE_LCORE_FOREACH_SLAVE(lcore_id) {
if (rte_eal_wait_lcore(lcore_id) < 0)
return -1;
}
return 0;
}