numam-dpdk/drivers/net/mlx5/mlx5_rxtx_vec_sse.h

813 lines
29 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright 2017 6WIND S.A.
* Copyright 2017 Mellanox Technologies, Ltd
*/
#ifndef RTE_PMD_MLX5_RXTX_VEC_SSE_H_
#define RTE_PMD_MLX5_RXTX_VEC_SSE_H_
#include <stdint.h>
#include <string.h>
#include <stdlib.h>
#include <smmintrin.h>
#include <rte_mbuf.h>
#include <rte_mempool.h>
#include <rte_prefetch.h>
#include <mlx5_prm.h>
#include "mlx5_defs.h"
#include "mlx5.h"
#include "mlx5_utils.h"
#include "mlx5_rxtx.h"
#include "mlx5_rxtx_vec.h"
#include "mlx5_autoconf.h"
#ifndef __INTEL_COMPILER
#pragma GCC diagnostic ignored "-Wcast-qual"
#endif
/**
* Store free buffers to RX SW ring.
*
* @param elts
* Pointer to SW ring to be filled.
* @param pkts
* Pointer to array of packets to be stored.
* @param pkts_n
* Number of packets to be stored.
*/
static inline void
rxq_copy_mbuf_v(struct rte_mbuf **elts, struct rte_mbuf **pkts, uint16_t n)
{
unsigned int pos;
uint16_t p = n & -2;
for (pos = 0; pos < p; pos += 2) {
__m128i mbp;
mbp = _mm_loadu_si128((__m128i *)&elts[pos]);
_mm_storeu_si128((__m128i *)&pkts[pos], mbp);
}
if (n & 1)
pkts[pos] = elts[pos];
}
/**
* Decompress a compressed completion and fill in mbufs in RX SW ring with data
* extracted from the title completion descriptor.
*
* @param rxq
* Pointer to RX queue structure.
* @param cq
* Pointer to completion array having a compressed completion at first.
* @param elts
* Pointer to SW ring to be filled. The first mbuf has to be pre-built from
* the title completion descriptor to be copied to the rest of mbufs.
*
* @return
* Number of mini-CQEs successfully decompressed.
*/
static inline uint16_t
rxq_cq_decompress_v(struct mlx5_rxq_data *rxq, volatile struct mlx5_cqe *cq,
struct rte_mbuf **elts)
{
volatile struct mlx5_mini_cqe8 *mcq = (void *)(cq + 1);
struct rte_mbuf *t_pkt = elts[0]; /* Title packet is pre-built. */
unsigned int pos;
unsigned int i;
unsigned int inv = 0;
/* Mask to shuffle from extracted mini CQE to mbuf. */
const __m128i shuf_mask1 =
_mm_set_epi8(0, 1, 2, 3, /* rss, bswap32 */
-1, -1, /* skip vlan_tci */
6, 7, /* data_len, bswap16 */
-1, -1, 6, 7, /* pkt_len, bswap16 */
-1, -1, -1, -1 /* skip packet_type */);
const __m128i shuf_mask2 =
_mm_set_epi8(8, 9, 10, 11, /* rss, bswap32 */
-1, -1, /* skip vlan_tci */
14, 15, /* data_len, bswap16 */
-1, -1, 14, 15, /* pkt_len, bswap16 */
-1, -1, -1, -1 /* skip packet_type */);
/* Restore the compressed count. Must be 16 bits. */
const uint16_t mcqe_n = t_pkt->data_len +
net: add rte prefix to ether defines Add 'RTE_' prefix to defines: - rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN. - rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN. - rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN. - rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN. - rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN. - rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN. - rename ETHER_MTU as RTE_ETHER_MTU. - rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN. - rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID. - rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN. - rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU. - rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR. - rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR. - rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4. - rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6. - rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP. - rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN. - rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP. - rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ. - rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG. - rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588. - rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW. - rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB. - rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP. - rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS. - rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM. - rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN. - rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE. - rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4. - rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6. - rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH. - rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH. - rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS. - rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP. - rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG. - rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN. Do not update the command line library to avoid adding a dependency to librte_net. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2019-05-21 16:13:05 +00:00
(rxq->crc_present * RTE_ETHER_CRC_LEN);
const __m128i rearm =
_mm_loadu_si128((__m128i *)&t_pkt->rearm_data);
const __m128i rxdf =
_mm_loadu_si128((__m128i *)&t_pkt->rx_descriptor_fields1);
const __m128i crc_adj =
_mm_set_epi16(0, 0, 0,
net: add rte prefix to ether defines Add 'RTE_' prefix to defines: - rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN. - rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN. - rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN. - rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN. - rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN. - rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN. - rename ETHER_MTU as RTE_ETHER_MTU. - rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN. - rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID. - rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN. - rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU. - rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR. - rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR. - rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4. - rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6. - rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP. - rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN. - rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP. - rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ. - rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG. - rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588. - rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW. - rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB. - rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP. - rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS. - rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM. - rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN. - rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE. - rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4. - rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6. - rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH. - rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH. - rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS. - rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP. - rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG. - rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN. Do not update the command line library to avoid adding a dependency to librte_net. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2019-05-21 16:13:05 +00:00
rxq->crc_present * RTE_ETHER_CRC_LEN,
0,
net: add rte prefix to ether defines Add 'RTE_' prefix to defines: - rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN. - rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN. - rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN. - rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN. - rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN. - rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN. - rename ETHER_MTU as RTE_ETHER_MTU. - rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN. - rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID. - rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN. - rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU. - rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR. - rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR. - rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4. - rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6. - rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP. - rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN. - rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP. - rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ. - rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG. - rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588. - rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW. - rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB. - rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP. - rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS. - rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM. - rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN. - rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE. - rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4. - rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6. - rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH. - rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH. - rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS. - rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP. - rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG. - rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN. Do not update the command line library to avoid adding a dependency to librte_net. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2019-05-21 16:13:05 +00:00
rxq->crc_present * RTE_ETHER_CRC_LEN,
0, 0);
__m128i ol_flags = _mm_setzero_si128();
__m128i ol_flags_mask = _mm_setzero_si128();
#ifdef MLX5_PMD_SOFT_COUNTERS
const __m128i zero = _mm_setzero_si128();
const __m128i ones = _mm_cmpeq_epi32(zero, zero);
uint32_t rcvd_byte = 0;
/* Mask to shuffle byte_cnt to add up stats. Do bswap16 for all. */
const __m128i len_shuf_mask =
_mm_set_epi8(-1, -1, -1, -1,
-1, -1, -1, -1,
14, 15, 6, 7,
10, 11, 2, 3);
#endif
/*
* A. load mCQEs into a 128bit register.
* B. store rearm data to mbuf.
* C. combine data from mCQEs with rx_descriptor_fields1.
* D. store rx_descriptor_fields1.
* E. store flow tag (rte_flow mark).
*/
for (pos = 0; pos < mcqe_n; ) {
__m128i mcqe1, mcqe2;
__m128i rxdf1, rxdf2;
#ifdef MLX5_PMD_SOFT_COUNTERS
__m128i byte_cnt, invalid_mask;
#endif
for (i = 0; i < MLX5_VPMD_DESCS_PER_LOOP; ++i)
if (likely(pos + i < mcqe_n))
rte_prefetch0((void *)(cq + pos + i));
/* A.1 load mCQEs into a 128bit register. */
mcqe1 = _mm_loadu_si128((__m128i *)&mcq[pos % 8]);
mcqe2 = _mm_loadu_si128((__m128i *)&mcq[pos % 8 + 2]);
/* B.1 store rearm data to mbuf. */
_mm_storeu_si128((__m128i *)&elts[pos]->rearm_data, rearm);
_mm_storeu_si128((__m128i *)&elts[pos + 1]->rearm_data, rearm);
/* C.1 combine data from mCQEs with rx_descriptor_fields1. */
rxdf1 = _mm_shuffle_epi8(mcqe1, shuf_mask1);
rxdf2 = _mm_shuffle_epi8(mcqe1, shuf_mask2);
rxdf1 = _mm_sub_epi16(rxdf1, crc_adj);
rxdf2 = _mm_sub_epi16(rxdf2, crc_adj);
rxdf1 = _mm_blend_epi16(rxdf1, rxdf, 0x23);
rxdf2 = _mm_blend_epi16(rxdf2, rxdf, 0x23);
/* D.1 store rx_descriptor_fields1. */
_mm_storeu_si128((__m128i *)
&elts[pos]->rx_descriptor_fields1,
rxdf1);
_mm_storeu_si128((__m128i *)
&elts[pos + 1]->rx_descriptor_fields1,
rxdf2);
/* B.1 store rearm data to mbuf. */
_mm_storeu_si128((__m128i *)&elts[pos + 2]->rearm_data, rearm);
_mm_storeu_si128((__m128i *)&elts[pos + 3]->rearm_data, rearm);
/* C.1 combine data from mCQEs with rx_descriptor_fields1. */
rxdf1 = _mm_shuffle_epi8(mcqe2, shuf_mask1);
rxdf2 = _mm_shuffle_epi8(mcqe2, shuf_mask2);
rxdf1 = _mm_sub_epi16(rxdf1, crc_adj);
rxdf2 = _mm_sub_epi16(rxdf2, crc_adj);
rxdf1 = _mm_blend_epi16(rxdf1, rxdf, 0x23);
rxdf2 = _mm_blend_epi16(rxdf2, rxdf, 0x23);
/* D.1 store rx_descriptor_fields1. */
_mm_storeu_si128((__m128i *)
&elts[pos + 2]->rx_descriptor_fields1,
rxdf1);
_mm_storeu_si128((__m128i *)
&elts[pos + 3]->rx_descriptor_fields1,
rxdf2);
#ifdef MLX5_PMD_SOFT_COUNTERS
invalid_mask = _mm_set_epi64x(0,
(mcqe_n - pos) *
sizeof(uint16_t) * 8);
invalid_mask = _mm_sll_epi64(ones, invalid_mask);
byte_cnt = _mm_blend_epi16(_mm_srli_si128(mcqe1, 4),
mcqe2, 0xcc);
byte_cnt = _mm_shuffle_epi8(byte_cnt, len_shuf_mask);
byte_cnt = _mm_andnot_si128(invalid_mask, byte_cnt);
byte_cnt = _mm_hadd_epi16(byte_cnt, zero);
rcvd_byte += _mm_cvtsi128_si64(_mm_hadd_epi16(byte_cnt, zero));
#endif
if (rxq->mark) {
if (rxq->mcqe_format !=
MLX5_CQE_RESP_FORMAT_FTAG_STRIDX) {
const uint32_t flow_tag = t_pkt->hash.fdir.hi;
/* E.1 store flow tag (rte_flow mark). */
elts[pos]->hash.fdir.hi = flow_tag;
elts[pos + 1]->hash.fdir.hi = flow_tag;
elts[pos + 2]->hash.fdir.hi = flow_tag;
elts[pos + 3]->hash.fdir.hi = flow_tag;
} else {
const __m128i flow_mark_adj =
_mm_set_epi32(-1, -1, -1, -1);
const __m128i flow_mark_shuf =
_mm_set_epi8(-1, 1, 0, 4,
-1, 9, 8, 12,
-1, -1, -1, -1,
-1, -1, -1, -1);
const __m128i ft_mask =
_mm_set1_epi32(0xffffff00);
const __m128i fdir_flags =
_mm_set1_epi32(PKT_RX_FDIR);
const __m128i fdir_all_flags =
_mm_set1_epi32(PKT_RX_FDIR |
PKT_RX_FDIR_ID);
__m128i fdir_id_flags =
_mm_set1_epi32(PKT_RX_FDIR_ID);
/* Extract flow_tag field. */
__m128i ftag0 =
_mm_shuffle_epi8(mcqe1, flow_mark_shuf);
__m128i ftag1 =
_mm_shuffle_epi8(mcqe2, flow_mark_shuf);
__m128i ftag =
_mm_unpackhi_epi64(ftag0, ftag1);
__m128i invalid_mask =
_mm_cmpeq_epi32(ftag, zero);
ol_flags_mask = _mm_or_si128(ol_flags_mask,
fdir_all_flags);
/* Set PKT_RX_FDIR if flow tag is non-zero. */
ol_flags = _mm_or_si128(ol_flags,
_mm_andnot_si128(invalid_mask,
fdir_flags));
/* Mask out invalid entries. */
fdir_id_flags = _mm_andnot_si128(invalid_mask,
fdir_id_flags);
/* Check if flow tag MLX5_FLOW_MARK_DEFAULT. */
ol_flags = _mm_or_si128(ol_flags,
_mm_andnot_si128(_mm_cmpeq_epi32(ftag,
ft_mask),
fdir_id_flags));
ftag = _mm_add_epi32(ftag, flow_mark_adj);
elts[pos]->hash.fdir.hi =
_mm_extract_epi32(ftag, 0);
elts[pos + 1]->hash.fdir.hi =
_mm_extract_epi32(ftag, 1);
elts[pos + 2]->hash.fdir.hi =
_mm_extract_epi32(ftag, 2);
elts[pos + 3]->hash.fdir.hi =
_mm_extract_epi32(ftag, 3);
}
}
if (unlikely(rxq->mcqe_format != MLX5_CQE_RESP_FORMAT_HASH)) {
if (rxq->mcqe_format ==
MLX5_CQE_RESP_FORMAT_L34H_STRIDX) {
const uint8_t pkt_info =
(cq->pkt_info & 0x3) << 6;
const uint8_t pkt_hdr0 =
_mm_extract_epi8(mcqe1, 0);
const uint8_t pkt_hdr1 =
_mm_extract_epi8(mcqe1, 8);
const uint8_t pkt_hdr2 =
_mm_extract_epi8(mcqe2, 0);
const uint8_t pkt_hdr3 =
_mm_extract_epi8(mcqe2, 8);
const __m128i vlan_mask =
_mm_set1_epi32(PKT_RX_VLAN |
PKT_RX_VLAN_STRIPPED);
const __m128i cv_mask =
_mm_set1_epi32(MLX5_CQE_VLAN_STRIPPED);
const __m128i pkt_cv =
_mm_set_epi32(pkt_hdr0 & 0x1,
pkt_hdr1 & 0x1,
pkt_hdr2 & 0x1,
pkt_hdr3 & 0x1);
ol_flags_mask = _mm_or_si128(ol_flags_mask,
vlan_mask);
ol_flags = _mm_or_si128(ol_flags,
_mm_and_si128(_mm_cmpeq_epi32(pkt_cv,
cv_mask), vlan_mask));
elts[pos]->packet_type =
mlx5_ptype_table[(pkt_hdr0 >> 2) |
pkt_info];
elts[pos + 1]->packet_type =
mlx5_ptype_table[(pkt_hdr1 >> 2) |
pkt_info];
elts[pos + 2]->packet_type =
mlx5_ptype_table[(pkt_hdr2 >> 2) |
pkt_info];
elts[pos + 3]->packet_type =
mlx5_ptype_table[(pkt_hdr3 >> 2) |
pkt_info];
if (rxq->tunnel) {
elts[pos]->packet_type |=
!!(((pkt_hdr0 >> 2) |
pkt_info) & (1 << 6));
elts[pos + 1]->packet_type |=
!!(((pkt_hdr1 >> 2) |
pkt_info) & (1 << 6));
elts[pos + 2]->packet_type |=
!!(((pkt_hdr2 >> 2) |
pkt_info) & (1 << 6));
elts[pos + 3]->packet_type |=
!!(((pkt_hdr3 >> 2) |
pkt_info) & (1 << 6));
}
}
const __m128i hash_flags =
_mm_set1_epi32(PKT_RX_RSS_HASH);
const __m128i rearm_flags =
_mm_set1_epi32((uint32_t)t_pkt->ol_flags);
ol_flags_mask = _mm_or_si128(ol_flags_mask, hash_flags);
ol_flags = _mm_or_si128(ol_flags,
_mm_andnot_si128(ol_flags_mask, rearm_flags));
elts[pos]->ol_flags =
_mm_extract_epi32(ol_flags, 0);
elts[pos + 1]->ol_flags =
_mm_extract_epi32(ol_flags, 1);
elts[pos + 2]->ol_flags =
_mm_extract_epi32(ol_flags, 2);
elts[pos + 3]->ol_flags =
_mm_extract_epi32(ol_flags, 3);
elts[pos]->hash.rss = 0;
elts[pos + 1]->hash.rss = 0;
elts[pos + 2]->hash.rss = 0;
elts[pos + 3]->hash.rss = 0;
}
if (rxq->dynf_meta) {
int32_t offs = rxq->flow_meta_offset;
const uint32_t meta =
*RTE_MBUF_DYNFIELD(t_pkt, offs, uint32_t *);
/* Check if title packet has valid metadata. */
if (meta) {
MLX5_ASSERT(t_pkt->ol_flags &
rxq->flow_meta_mask);
*RTE_MBUF_DYNFIELD(elts[pos], offs,
uint32_t *) = meta;
*RTE_MBUF_DYNFIELD(elts[pos + 1], offs,
uint32_t *) = meta;
*RTE_MBUF_DYNFIELD(elts[pos + 2], offs,
uint32_t *) = meta;
*RTE_MBUF_DYNFIELD(elts[pos + 3], offs,
uint32_t *) = meta;
}
}
pos += MLX5_VPMD_DESCS_PER_LOOP;
/* Move to next CQE and invalidate consumed CQEs. */
if (!(pos & 0x7) && pos < mcqe_n) {
if (pos + 8 < mcqe_n)
rte_prefetch0((void *)(cq + pos + 8));
mcq = (void *)(cq + pos);
for (i = 0; i < 8; ++i)
cq[inv++].op_own = MLX5_CQE_INVALIDATE;
}
}
/* Invalidate the rest of CQEs. */
for (; inv < mcqe_n; ++inv)
cq[inv].op_own = MLX5_CQE_INVALIDATE;
#ifdef MLX5_PMD_SOFT_COUNTERS
rxq->stats.ipackets += mcqe_n;
rxq->stats.ibytes += rcvd_byte;
#endif
return mcqe_n;
}
/**
* Calculate packet type and offload flag for mbuf and store it.
*
* @param rxq
* Pointer to RX queue structure.
* @param cqes[4]
* Array of four 16bytes completions extracted from the original completion
* descriptor.
* @param op_err
* Opcode vector having responder error status. Each field is 4B.
* @param pkts
* Pointer to array of packets to be filled.
*/
static inline void
rxq_cq_to_ptype_oflags_v(struct mlx5_rxq_data *rxq, __m128i cqes[4],
__m128i op_err, struct rte_mbuf **pkts)
{
__m128i pinfo0, pinfo1;
__m128i pinfo, ptype;
__m128i ol_flags = _mm_set1_epi32(rxq->rss_hash * PKT_RX_RSS_HASH |
rxq->hw_timestamp * rxq->timestamp_rx_flag);
__m128i cv_flags;
const __m128i zero = _mm_setzero_si128();
const __m128i ptype_mask = _mm_set1_epi32(0xfd06);
const __m128i ptype_ol_mask = _mm_set1_epi32(0x106);
const __m128i pinfo_mask = _mm_set1_epi32(0x3);
const __m128i cv_flag_sel =
_mm_set_epi8(0, 0, 0, 0, 0, 0, 0, 0, 0,
(uint8_t)((PKT_RX_IP_CKSUM_GOOD |
PKT_RX_L4_CKSUM_GOOD) >> 1),
0,
(uint8_t)(PKT_RX_L4_CKSUM_GOOD >> 1),
0,
(uint8_t)(PKT_RX_IP_CKSUM_GOOD >> 1),
(uint8_t)(PKT_RX_VLAN | PKT_RX_VLAN_STRIPPED),
0);
const __m128i cv_mask =
_mm_set1_epi32(PKT_RX_IP_CKSUM_GOOD | PKT_RX_L4_CKSUM_GOOD |
PKT_RX_VLAN | PKT_RX_VLAN_STRIPPED);
const __m128i mbuf_init =
_mm_load_si128((__m128i *)&rxq->mbuf_initializer);
__m128i rearm0, rearm1, rearm2, rearm3;
uint8_t pt_idx0, pt_idx1, pt_idx2, pt_idx3;
/* Extract pkt_info field. */
pinfo0 = _mm_unpacklo_epi32(cqes[0], cqes[1]);
pinfo1 = _mm_unpacklo_epi32(cqes[2], cqes[3]);
pinfo = _mm_unpacklo_epi64(pinfo0, pinfo1);
/* Extract hdr_type_etc field. */
pinfo0 = _mm_unpackhi_epi32(cqes[0], cqes[1]);
pinfo1 = _mm_unpackhi_epi32(cqes[2], cqes[3]);
ptype = _mm_unpacklo_epi64(pinfo0, pinfo1);
if (rxq->mark) {
const __m128i pinfo_ft_mask = _mm_set1_epi32(0xffffff00);
const __m128i fdir_flags = _mm_set1_epi32(PKT_RX_FDIR);
__m128i fdir_id_flags = _mm_set1_epi32(PKT_RX_FDIR_ID);
__m128i flow_tag, invalid_mask;
flow_tag = _mm_and_si128(pinfo, pinfo_ft_mask);
/* Check if flow tag is non-zero then set PKT_RX_FDIR. */
invalid_mask = _mm_cmpeq_epi32(flow_tag, zero);
ol_flags = _mm_or_si128(ol_flags,
_mm_andnot_si128(invalid_mask,
fdir_flags));
/* Mask out invalid entries. */
fdir_id_flags = _mm_andnot_si128(invalid_mask, fdir_id_flags);
/* Check if flow tag MLX5_FLOW_MARK_DEFAULT. */
ol_flags = _mm_or_si128(ol_flags,
_mm_andnot_si128(
_mm_cmpeq_epi32(flow_tag,
pinfo_ft_mask),
fdir_id_flags));
}
/*
* Merge the two fields to generate the following:
* bit[1] = l3_ok
* bit[2] = l4_ok
* bit[8] = cv
* bit[11:10] = l3_hdr_type
* bit[14:12] = l4_hdr_type
* bit[15] = ip_frag
* bit[16] = tunneled
* bit[17] = outer_l3_type
*/
ptype = _mm_and_si128(ptype, ptype_mask);
pinfo = _mm_and_si128(pinfo, pinfo_mask);
pinfo = _mm_slli_epi32(pinfo, 16);
/* Make pinfo has merged fields for ol_flags calculation. */
pinfo = _mm_or_si128(ptype, pinfo);
ptype = _mm_srli_epi32(pinfo, 10);
ptype = _mm_packs_epi32(ptype, zero);
/* Errored packets will have RTE_PTYPE_ALL_MASK. */
op_err = _mm_srli_epi16(op_err, 8);
ptype = _mm_or_si128(ptype, op_err);
pt_idx0 = _mm_extract_epi8(ptype, 0);
pt_idx1 = _mm_extract_epi8(ptype, 2);
pt_idx2 = _mm_extract_epi8(ptype, 4);
pt_idx3 = _mm_extract_epi8(ptype, 6);
pkts[0]->packet_type = mlx5_ptype_table[pt_idx0] |
!!(pt_idx0 & (1 << 6)) * rxq->tunnel;
pkts[1]->packet_type = mlx5_ptype_table[pt_idx1] |
!!(pt_idx1 & (1 << 6)) * rxq->tunnel;
pkts[2]->packet_type = mlx5_ptype_table[pt_idx2] |
!!(pt_idx2 & (1 << 6)) * rxq->tunnel;
pkts[3]->packet_type = mlx5_ptype_table[pt_idx3] |
!!(pt_idx3 & (1 << 6)) * rxq->tunnel;
/* Fill flags for checksum and VLAN. */
pinfo = _mm_and_si128(pinfo, ptype_ol_mask);
pinfo = _mm_shuffle_epi8(cv_flag_sel, pinfo);
/* Locate checksum flags at byte[2:1] and merge with VLAN flags. */
cv_flags = _mm_slli_epi32(pinfo, 9);
cv_flags = _mm_or_si128(pinfo, cv_flags);
/* Move back flags to start from byte[0]. */
cv_flags = _mm_srli_epi32(cv_flags, 8);
/* Mask out garbage bits. */
cv_flags = _mm_and_si128(cv_flags, cv_mask);
/* Merge to ol_flags. */
ol_flags = _mm_or_si128(ol_flags, cv_flags);
/* Merge mbuf_init and ol_flags. */
rearm0 = _mm_blend_epi16(mbuf_init, _mm_slli_si128(ol_flags, 8), 0x30);
rearm1 = _mm_blend_epi16(mbuf_init, _mm_slli_si128(ol_flags, 4), 0x30);
rearm2 = _mm_blend_epi16(mbuf_init, ol_flags, 0x30);
rearm3 = _mm_blend_epi16(mbuf_init, _mm_srli_si128(ol_flags, 4), 0x30);
/* Write 8B rearm_data and 8B ol_flags. */
_mm_store_si128((__m128i *)&pkts[0]->rearm_data, rearm0);
_mm_store_si128((__m128i *)&pkts[1]->rearm_data, rearm1);
_mm_store_si128((__m128i *)&pkts[2]->rearm_data, rearm2);
_mm_store_si128((__m128i *)&pkts[3]->rearm_data, rearm3);
}
/**
* Process a non-compressed completion and fill in mbufs in RX SW ring
* with data extracted from the title completion descriptor.
*
* @param rxq
* Pointer to RX queue structure.
* @param cq
* Pointer to completion array having a non-compressed completion at first.
* @param elts
* Pointer to SW ring to be filled. The first mbuf has to be pre-built from
* the title completion descriptor to be copied to the rest of mbufs.
* @param[out] pkts
* Array to store received packets.
* @param pkts_n
* Maximum number of packets in array.
* @param[out] err
* Pointer to a flag. Set non-zero value if pkts array has at least one error
* packet to handle.
* @param[out] comp
* Pointer to a index. Set it to the first compressed completion if any.
*
* @return
* Number of CQEs successfully processed.
*/
static inline uint16_t
rxq_cq_process_v(struct mlx5_rxq_data *rxq, volatile struct mlx5_cqe *cq,
struct rte_mbuf **elts, struct rte_mbuf **pkts,
uint16_t pkts_n, uint64_t *err, uint64_t *comp)
{
const uint16_t q_n = 1 << rxq->cqe_n;
const uint16_t q_mask = q_n - 1;
unsigned int pos;
uint64_t n = 0;
uint64_t comp_idx = MLX5_VPMD_DESCS_PER_LOOP;
uint16_t nocmp_n = 0;
unsigned int ownership = !!(rxq->cq_ci & (q_mask + 1));
const __m128i owner_check = _mm_set1_epi64x(0x0100000001000000LL);
const __m128i opcode_check = _mm_set1_epi64x(0xf0000000f0000000LL);
const __m128i format_check = _mm_set1_epi64x(0x0c0000000c000000LL);
const __m128i resp_err_check = _mm_set1_epi64x(0xe0000000e0000000LL);
#ifdef MLX5_PMD_SOFT_COUNTERS
uint32_t rcvd_byte = 0;
/* Mask to shuffle byte_cnt to add up stats. Do bswap16 for all. */
const __m128i len_shuf_mask =
_mm_set_epi8(-1, -1, -1, -1,
-1, -1, -1, -1,
12, 13, 8, 9,
4, 5, 0, 1);
#endif
/* Mask to shuffle from extracted CQE to mbuf. */
const __m128i shuf_mask =
_mm_set_epi8(-1, 3, 2, 1, /* fdir.hi */
12, 13, 14, 15, /* rss, bswap32 */
10, 11, /* vlan_tci, bswap16 */
4, 5, /* data_len, bswap16 */
-1, -1, /* zero out 2nd half of pkt_len */
4, 5 /* pkt_len, bswap16 */);
/* Mask to blend from the last Qword to the first DQword. */
const __m128i blend_mask =
_mm_set_epi8(-1, -1, -1, -1,
-1, -1, -1, -1,
0, 0, 0, 0,
0, 0, 0, -1);
const __m128i zero = _mm_setzero_si128();
const __m128i ones = _mm_cmpeq_epi32(zero, zero);
const __m128i crc_adj =
_mm_set_epi16(0, 0, 0, 0, 0,
net: add rte prefix to ether defines Add 'RTE_' prefix to defines: - rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN. - rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN. - rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN. - rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN. - rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN. - rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN. - rename ETHER_MTU as RTE_ETHER_MTU. - rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN. - rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID. - rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN. - rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU. - rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR. - rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR. - rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4. - rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6. - rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP. - rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN. - rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP. - rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ. - rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG. - rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588. - rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW. - rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB. - rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP. - rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS. - rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM. - rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN. - rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE. - rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4. - rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6. - rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH. - rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH. - rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS. - rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP. - rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG. - rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN. Do not update the command line library to avoid adding a dependency to librte_net. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2019-05-21 16:13:05 +00:00
rxq->crc_present * RTE_ETHER_CRC_LEN,
0,
net: add rte prefix to ether defines Add 'RTE_' prefix to defines: - rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN. - rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN. - rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN. - rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN. - rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN. - rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN. - rename ETHER_MTU as RTE_ETHER_MTU. - rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN. - rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID. - rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN. - rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU. - rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR. - rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR. - rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4. - rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6. - rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP. - rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN. - rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP. - rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ. - rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG. - rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588. - rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW. - rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB. - rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP. - rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS. - rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM. - rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN. - rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE. - rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4. - rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6. - rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH. - rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH. - rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS. - rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP. - rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG. - rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN. Do not update the command line library to avoid adding a dependency to librte_net. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2019-05-21 16:13:05 +00:00
rxq->crc_present * RTE_ETHER_CRC_LEN);
const __m128i flow_mark_adj = _mm_set_epi32(rxq->mark * (-1), 0, 0, 0);
/*
* A. load first Qword (8bytes) in one loop.
* B. copy 4 mbuf pointers from elts ring to returing pkts.
* C. load remained CQE data and extract necessary fields.
* Final 16bytes cqes[] extracted from original 64bytes CQE has the
* following structure:
* struct {
* uint8_t pkt_info;
* uint8_t flow_tag[3];
* uint16_t byte_cnt;
* uint8_t rsvd4;
* uint8_t op_own;
* uint16_t hdr_type_etc;
* uint16_t vlan_info;
* uint32_t rx_has_res;
* } c;
* D. fill in mbuf.
* E. get valid CQEs.
* F. find compressed CQE.
*/
for (pos = 0;
pos < pkts_n;
pos += MLX5_VPMD_DESCS_PER_LOOP) {
__m128i cqes[MLX5_VPMD_DESCS_PER_LOOP];
__m128i cqe_tmp1, cqe_tmp2;
__m128i pkt_mb0, pkt_mb1, pkt_mb2, pkt_mb3;
__m128i op_own, op_own_tmp1, op_own_tmp2;
__m128i opcode, owner_mask, invalid_mask;
__m128i comp_mask;
__m128i mask;
#ifdef MLX5_PMD_SOFT_COUNTERS
__m128i byte_cnt;
#endif
__m128i mbp1, mbp2;
__m128i p = _mm_set_epi16(0, 0, 0, 0, 3, 2, 1, 0);
unsigned int p1, p2, p3;
/* Prefetch next 4 CQEs. */
if (pkts_n - pos >= 2 * MLX5_VPMD_DESCS_PER_LOOP) {
rte_prefetch0(&cq[pos + MLX5_VPMD_DESCS_PER_LOOP]);
rte_prefetch0(&cq[pos + MLX5_VPMD_DESCS_PER_LOOP + 1]);
rte_prefetch0(&cq[pos + MLX5_VPMD_DESCS_PER_LOOP + 2]);
rte_prefetch0(&cq[pos + MLX5_VPMD_DESCS_PER_LOOP + 3]);
}
/* A.0 do not cross the end of CQ. */
mask = _mm_set_epi64x(0, (pkts_n - pos) * sizeof(uint16_t) * 8);
mask = _mm_sll_epi64(ones, mask);
p = _mm_andnot_si128(mask, p);
/* A.1 load cqes. */
p3 = _mm_extract_epi16(p, 3);
cqes[3] = _mm_loadl_epi64((__m128i *)
&cq[pos + p3].sop_drop_qpn);
rte_compiler_barrier();
p2 = _mm_extract_epi16(p, 2);
cqes[2] = _mm_loadl_epi64((__m128i *)
&cq[pos + p2].sop_drop_qpn);
rte_compiler_barrier();
/* B.1 load mbuf pointers. */
mbp1 = _mm_loadu_si128((__m128i *)&elts[pos]);
mbp2 = _mm_loadu_si128((__m128i *)&elts[pos + 2]);
/* A.1 load a block having op_own. */
p1 = _mm_extract_epi16(p, 1);
cqes[1] = _mm_loadl_epi64((__m128i *)
&cq[pos + p1].sop_drop_qpn);
rte_compiler_barrier();
cqes[0] = _mm_loadl_epi64((__m128i *)
&cq[pos].sop_drop_qpn);
/* B.2 copy mbuf pointers. */
_mm_storeu_si128((__m128i *)&pkts[pos], mbp1);
_mm_storeu_si128((__m128i *)&pkts[pos + 2], mbp2);
rte_io_rmb();
/* C.1 load remained CQE data and extract necessary fields. */
cqe_tmp2 = _mm_load_si128((__m128i *)&cq[pos + p3]);
cqe_tmp1 = _mm_load_si128((__m128i *)&cq[pos + p2]);
cqes[3] = _mm_blendv_epi8(cqes[3], cqe_tmp2, blend_mask);
cqes[2] = _mm_blendv_epi8(cqes[2], cqe_tmp1, blend_mask);
cqe_tmp2 = _mm_loadu_si128((__m128i *)&cq[pos + p3].csum);
cqe_tmp1 = _mm_loadu_si128((__m128i *)&cq[pos + p2].csum);
cqes[3] = _mm_blend_epi16(cqes[3], cqe_tmp2, 0x30);
cqes[2] = _mm_blend_epi16(cqes[2], cqe_tmp1, 0x30);
cqe_tmp2 = _mm_loadl_epi64((__m128i *)&cq[pos + p3].rsvd4[2]);
cqe_tmp1 = _mm_loadl_epi64((__m128i *)&cq[pos + p2].rsvd4[2]);
cqes[3] = _mm_blend_epi16(cqes[3], cqe_tmp2, 0x04);
cqes[2] = _mm_blend_epi16(cqes[2], cqe_tmp1, 0x04);
/* C.2 generate final structure for mbuf with swapping bytes. */
pkt_mb3 = _mm_shuffle_epi8(cqes[3], shuf_mask);
pkt_mb2 = _mm_shuffle_epi8(cqes[2], shuf_mask);
/* C.3 adjust CRC length. */
pkt_mb3 = _mm_sub_epi16(pkt_mb3, crc_adj);
pkt_mb2 = _mm_sub_epi16(pkt_mb2, crc_adj);
/* C.4 adjust flow mark. */
pkt_mb3 = _mm_add_epi32(pkt_mb3, flow_mark_adj);
pkt_mb2 = _mm_add_epi32(pkt_mb2, flow_mark_adj);
/* D.1 fill in mbuf - rx_descriptor_fields1. */
_mm_storeu_si128((void *)&pkts[pos + 3]->pkt_len, pkt_mb3);
_mm_storeu_si128((void *)&pkts[pos + 2]->pkt_len, pkt_mb2);
/* E.1 extract op_own field. */
op_own_tmp2 = _mm_unpacklo_epi32(cqes[2], cqes[3]);
/* C.1 load remained CQE data and extract necessary fields. */
cqe_tmp2 = _mm_load_si128((__m128i *)&cq[pos + p1]);
cqe_tmp1 = _mm_load_si128((__m128i *)&cq[pos]);
cqes[1] = _mm_blendv_epi8(cqes[1], cqe_tmp2, blend_mask);
cqes[0] = _mm_blendv_epi8(cqes[0], cqe_tmp1, blend_mask);
cqe_tmp2 = _mm_loadu_si128((__m128i *)&cq[pos + p1].csum);
cqe_tmp1 = _mm_loadu_si128((__m128i *)&cq[pos].csum);
cqes[1] = _mm_blend_epi16(cqes[1], cqe_tmp2, 0x30);
cqes[0] = _mm_blend_epi16(cqes[0], cqe_tmp1, 0x30);
cqe_tmp2 = _mm_loadl_epi64((__m128i *)&cq[pos + p1].rsvd4[2]);
cqe_tmp1 = _mm_loadl_epi64((__m128i *)&cq[pos].rsvd4[2]);
cqes[1] = _mm_blend_epi16(cqes[1], cqe_tmp2, 0x04);
cqes[0] = _mm_blend_epi16(cqes[0], cqe_tmp1, 0x04);
/* C.2 generate final structure for mbuf with swapping bytes. */
pkt_mb1 = _mm_shuffle_epi8(cqes[1], shuf_mask);
pkt_mb0 = _mm_shuffle_epi8(cqes[0], shuf_mask);
/* C.3 adjust CRC length. */
pkt_mb1 = _mm_sub_epi16(pkt_mb1, crc_adj);
pkt_mb0 = _mm_sub_epi16(pkt_mb0, crc_adj);
/* C.4 adjust flow mark. */
pkt_mb1 = _mm_add_epi32(pkt_mb1, flow_mark_adj);
pkt_mb0 = _mm_add_epi32(pkt_mb0, flow_mark_adj);
/* E.1 extract op_own byte. */
op_own_tmp1 = _mm_unpacklo_epi32(cqes[0], cqes[1]);
op_own = _mm_unpackhi_epi64(op_own_tmp1, op_own_tmp2);
/* D.1 fill in mbuf - rx_descriptor_fields1. */
_mm_storeu_si128((void *)&pkts[pos + 1]->pkt_len, pkt_mb1);
_mm_storeu_si128((void *)&pkts[pos]->pkt_len, pkt_mb0);
/* E.2 flip owner bit to mark CQEs from last round. */
owner_mask = _mm_and_si128(op_own, owner_check);
if (ownership)
owner_mask = _mm_xor_si128(owner_mask, owner_check);
owner_mask = _mm_cmpeq_epi32(owner_mask, owner_check);
owner_mask = _mm_packs_epi32(owner_mask, zero);
/* E.3 get mask for invalidated CQEs. */
opcode = _mm_and_si128(op_own, opcode_check);
invalid_mask = _mm_cmpeq_epi32(opcode_check, opcode);
invalid_mask = _mm_packs_epi32(invalid_mask, zero);
/* E.4 mask out beyond boundary. */
invalid_mask = _mm_or_si128(invalid_mask, mask);
/* E.5 merge invalid_mask with invalid owner. */
invalid_mask = _mm_or_si128(invalid_mask, owner_mask);
/* F.1 find compressed CQE format. */
comp_mask = _mm_and_si128(op_own, format_check);
comp_mask = _mm_cmpeq_epi32(comp_mask, format_check);
comp_mask = _mm_packs_epi32(comp_mask, zero);
/* F.2 mask out invalid entries. */
comp_mask = _mm_andnot_si128(invalid_mask, comp_mask);
comp_idx = _mm_cvtsi128_si64(comp_mask);
/* F.3 get the first compressed CQE. */
comp_idx = comp_idx ?
__builtin_ctzll(comp_idx) /
(sizeof(uint16_t) * 8) :
MLX5_VPMD_DESCS_PER_LOOP;
/* E.6 mask out entries after the compressed CQE. */
mask = _mm_set_epi64x(0, comp_idx * sizeof(uint16_t) * 8);
mask = _mm_sll_epi64(ones, mask);
invalid_mask = _mm_or_si128(invalid_mask, mask);
/* E.7 count non-compressed valid CQEs. */
n = _mm_cvtsi128_si64(invalid_mask);
n = n ? __builtin_ctzll(n) / (sizeof(uint16_t) * 8) :
MLX5_VPMD_DESCS_PER_LOOP;
nocmp_n += n;
/* D.2 get the final invalid mask. */
mask = _mm_set_epi64x(0, n * sizeof(uint16_t) * 8);
mask = _mm_sll_epi64(ones, mask);
invalid_mask = _mm_or_si128(invalid_mask, mask);
/* D.3 check error in opcode. */
opcode = _mm_cmpeq_epi32(resp_err_check, opcode);
opcode = _mm_packs_epi32(opcode, zero);
opcode = _mm_andnot_si128(invalid_mask, opcode);
/* D.4 mark if any error is set */
*err |= _mm_cvtsi128_si64(opcode);
/* D.5 fill in mbuf - rearm_data and packet_type. */
rxq_cq_to_ptype_oflags_v(rxq, cqes, opcode, &pkts[pos]);
if (rxq->hw_timestamp) {
int offset = rxq->timestamp_offset;
if (rxq->rt_timestamp) {
struct mlx5_dev_ctx_shared *sh = rxq->sh;
uint64_t ts;
ts = rte_be_to_cpu_64(cq[pos].timestamp);
mlx5_timestamp_set(pkts[pos], offset,
mlx5_txpp_convert_rx_ts(sh, ts));
ts = rte_be_to_cpu_64(cq[pos + p1].timestamp);
mlx5_timestamp_set(pkts[pos + 1], offset,
mlx5_txpp_convert_rx_ts(sh, ts));
ts = rte_be_to_cpu_64(cq[pos + p2].timestamp);
mlx5_timestamp_set(pkts[pos + 2], offset,
mlx5_txpp_convert_rx_ts(sh, ts));
ts = rte_be_to_cpu_64(cq[pos + p3].timestamp);
mlx5_timestamp_set(pkts[pos + 3], offset,
mlx5_txpp_convert_rx_ts(sh, ts));
} else {
mlx5_timestamp_set(pkts[pos], offset,
rte_be_to_cpu_64(cq[pos].timestamp));
mlx5_timestamp_set(pkts[pos + 1], offset,
rte_be_to_cpu_64(cq[pos + p1].timestamp));
mlx5_timestamp_set(pkts[pos + 2], offset,
rte_be_to_cpu_64(cq[pos + p2].timestamp));
mlx5_timestamp_set(pkts[pos + 3], offset,
rte_be_to_cpu_64(cq[pos + p3].timestamp));
}
}
if (rxq->dynf_meta) {
/* This code is subject for futher optimization. */
int32_t offs = rxq->flow_meta_offset;
*RTE_MBUF_DYNFIELD(pkts[pos], offs, uint32_t *) =
cq[pos].flow_table_metadata;
*RTE_MBUF_DYNFIELD(pkts[pos + 1], offs, uint32_t *) =
cq[pos + p1].flow_table_metadata;
*RTE_MBUF_DYNFIELD(pkts[pos + 2], offs, uint32_t *) =
cq[pos + p2].flow_table_metadata;
*RTE_MBUF_DYNFIELD(pkts[pos + 3], offs, uint32_t *) =
cq[pos + p3].flow_table_metadata;
if (*RTE_MBUF_DYNFIELD(pkts[pos], offs, uint32_t *))
pkts[pos]->ol_flags |= rxq->flow_meta_mask;
if (*RTE_MBUF_DYNFIELD(pkts[pos + 1], offs, uint32_t *))
pkts[pos + 1]->ol_flags |= rxq->flow_meta_mask;
if (*RTE_MBUF_DYNFIELD(pkts[pos + 2], offs, uint32_t *))
pkts[pos + 2]->ol_flags |= rxq->flow_meta_mask;
if (*RTE_MBUF_DYNFIELD(pkts[pos + 3], offs, uint32_t *))
pkts[pos + 3]->ol_flags |= rxq->flow_meta_mask;
}
#ifdef MLX5_PMD_SOFT_COUNTERS
/* Add up received bytes count. */
byte_cnt = _mm_shuffle_epi8(op_own, len_shuf_mask);
byte_cnt = _mm_andnot_si128(invalid_mask, byte_cnt);
byte_cnt = _mm_hadd_epi16(byte_cnt, zero);
rcvd_byte += _mm_cvtsi128_si64(_mm_hadd_epi16(byte_cnt, zero));
#endif
/*
* Break the loop unless more valid CQE is expected, or if
* there's a compressed CQE.
*/
if (n != MLX5_VPMD_DESCS_PER_LOOP)
break;
}
#ifdef MLX5_PMD_SOFT_COUNTERS
rxq->stats.ipackets += nocmp_n;
rxq->stats.ibytes += rcvd_byte;
#endif
if (comp_idx == n)
*comp = comp_idx;
return nocmp_n;
}
#endif /* RTE_PMD_MLX5_RXTX_VEC_SSE_H_ */