numam-dpdk/app/test-pmd/macswap.c

152 lines
4.5 KiB
C
Raw Normal View History

/*-
* BSD LICENSE
*
* Copyright(c) 2014 Tilera Corporation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Tilera Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include <stdarg.h>
#include <string.h>
#include <stdio.h>
#include <errno.h>
#include <stdint.h>
#include <unistd.h>
#include <inttypes.h>
#include <sys/queue.h>
#include <sys/stat.h>
#include <rte_common.h>
#include <rte_byteorder.h>
#include <rte_log.h>
#include <rte_debug.h>
#include <rte_cycles.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
#include <rte_memzone.h>
#include <rte_launch.h>
#include <rte_tailq.h>
#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_lcore.h>
#include <rte_atomic.h>
#include <rte_branch_prediction.h>
#include <rte_ring.h>
#include <rte_memory.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
#include <rte_interrupts.h>
#include <rte_pci.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_ip.h>
#include <rte_string_fns.h>
#include "testpmd.h"
/*
* MAC swap forwarding mode: Swap the source and the destination Ethernet
* addresses of packets before forwarding them.
*/
static void
pkt_burst_mac_swap(struct fwd_stream *fs)
{
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
struct rte_port *txp;
struct rte_mbuf *mb;
struct ether_hdr *eth_hdr;
struct ether_addr addr;
uint16_t nb_rx;
uint16_t nb_tx;
uint16_t i;
uint64_t ol_flags = 0;
#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
uint64_t start_tsc;
uint64_t end_tsc;
uint64_t core_cycles;
#endif
#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
start_tsc = rte_rdtsc();
#endif
/*
* Receive a burst of packets and forward them.
*/
nb_rx = rte_eth_rx_burst(fs->rx_port, fs->rx_queue, pkts_burst,
nb_pkt_per_burst);
if (unlikely(nb_rx == 0))
return;
#ifdef RTE_TEST_PMD_RECORD_BURST_STATS
fs->rx_burst_stats.pkt_burst_spread[nb_rx]++;
#endif
fs->rx_packets += nb_rx;
txp = &ports[fs->tx_port];
if (txp->tx_ol_flags & TESTPMD_TX_OFFLOAD_INSERT_VLAN)
ol_flags = PKT_TX_VLAN_PKT;
for (i = 0; i < nb_rx; i++) {
mb = pkts_burst[i];
eth_hdr = rte_pktmbuf_mtod(mb, struct ether_hdr *);
/* Swap dest and src mac addresses. */
ether_addr_copy(&eth_hdr->d_addr, &addr);
ether_addr_copy(&eth_hdr->s_addr, &eth_hdr->d_addr);
ether_addr_copy(&addr, &eth_hdr->s_addr);
mb->ol_flags = ol_flags;
mbuf: flatten struct vlan_macip The vlan_macip structure combined a vlan tag id with l2 and l3 headers lengths for tracking offloads. However, this structure was only used as a unit by the e1000 and ixgbe drivers, not generally. This patch removes the structure from the mbuf header and places the fields into the mbuf structure directly at the required point, without any net effect on the structure layout. This allows us to treat the vlan tags and header length fields as separate for future mbuf changes. The drivers which were written to use the combined structure still do so, using a driver-local definition of it. Reduce perf regression caused by splitting vlan_macip field. This is done by providing a single uint16_t value to allow writing/clearing the l2 and l3 lengths together. There is still a small perf hit to the slow path TX due to the reads from vlan_tci and l2/l3 lengths being separated. (<5% in my tests with testpmd with no extra params). Unfortunately, this cannot be eliminated, without restoring the vlan tags and l2/l3 lengths as a combined 32-bit field. This would prevent us from ever looking to move those fields about and is an artificial tie that applies only for performance in igb and ixgbe drivers. Therefore, this patch keeps the vlan_tci field separate from the lengths as the best solution going forward. Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
2014-09-09 14:40:56 +00:00
mb->l2_len = sizeof(struct ether_hdr);
mb->l3_len = sizeof(struct ipv4_hdr);
mb->vlan_tci = txp->tx_vlan_id;
}
nb_tx = rte_eth_tx_burst(fs->tx_port, fs->tx_queue, pkts_burst, nb_rx);
fs->tx_packets += nb_tx;
#ifdef RTE_TEST_PMD_RECORD_BURST_STATS
fs->tx_burst_stats.pkt_burst_spread[nb_tx]++;
#endif
if (unlikely(nb_tx < nb_rx)) {
fs->fwd_dropped += (nb_rx - nb_tx);
do {
rte_pktmbuf_free(pkts_burst[nb_tx]);
} while (++nb_tx < nb_rx);
}
#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
end_tsc = rte_rdtsc();
core_cycles = (end_tsc - start_tsc);
fs->core_cycles = (uint64_t) (fs->core_cycles + core_cycles);
#endif
}
struct fwd_engine mac_swap_engine = {
.fwd_mode_name = "macswap",
.port_fwd_begin = NULL,
.port_fwd_end = NULL,
.packet_fwd = pkt_burst_mac_swap,
};